Diff for /loncom/loncnew between versions 1.60 and 1.89

version 1.60, 2004/09/22 11:11:54 version 1.89, 2010/06/14 13:29:27
Line 60  use LONCAPA::Stack; Line 60  use LONCAPA::Stack;
 use LONCAPA::LondConnection;  use LONCAPA::LondConnection;
 use LONCAPA::LondTransaction;  use LONCAPA::LondTransaction;
 use LONCAPA::Configuration;  use LONCAPA::Configuration;
 use LONCAPA::HashIterator;  use Fcntl qw(:flock);
   
   
 # Read the httpd configuration file to get perl variables  # Read the httpd configuration file to get perl variables
Line 72  my %perlvar    = %{$perlvarref}; Line 72  my %perlvar    = %{$perlvarref};
 #  #
 #  parent and shared variables.  #  parent and shared variables.
   
 my %ChildHash; # by pid -> host.  my %ChildPid; # by pid -> host.
 my %HostToPid; # By host -> pid.  my %ChildHost; # by host.
 my %HostHash; # by loncapaname -> IP.  my %listening_to; # Socket->host table for who the parent
                                   # is listening to.
   my %parent_dispatchers;         # host-> listener watcher events. 
   
   my %parent_handlers; # Parent signal handlers...
   
 my $MaxConnectionCount = 10; # Will get from config later.  my $MaxConnectionCount = 10; # Will get from config later.
 my $ClientConnection = 0; # Uniquifier for client events.  my $ClientConnection = 0; # Uniquifier for client events.
   
 my $DebugLevel = 0;  my $DebugLevel = 0;
 my $NextDebugLevel= 2; # So Sigint can toggle this.  my $NextDebugLevel= 2; # So Sigint can toggle this.
 my $IdleTimeout= 600; # Wait 10 minutes before pruning connections.  my $IdleTimeout= 7200; # Wait two hours before pruning connections.
   
 my $LogTransactions = 0; # When True, all transactions/replies get logged.  my $LogTransactions = 0; # When True, all transactions/replies get logged.
   my $executable      = $0; # Get the full path to me.
   
 #  #
 #  The variables below are only used by the child processes.  #  The variables below are only used by the child processes.
 #  #
 my $RemoteHost; # Name of host child is talking to.  my $RemoteHost; # Name of host child is talking to.
   my $RemoteHostId; # default lonid of host child is talking to.
   my @all_host_ids;
 my $UnixSocketDir= $perlvar{'lonSockDir'};  my $UnixSocketDir= $perlvar{'lonSockDir'};
 my $IdleConnections = Stack->new(); # Set of idle connections  my $IdleConnections = Stack->new(); # Set of idle connections
 my %ActiveConnections; # Connections to the remote lond.  my %ActiveConnections; # Connections to the remote lond.
Line 100  my $ConnectionCount = 0; Line 106  my $ConnectionCount = 0;
 my $IdleSeconds     = 0; # Number of seconds idle.  my $IdleSeconds     = 0; # Number of seconds idle.
 my $Status          = ""; # Current status string.  my $Status          = ""; # Current status string.
 my $RecentLogEntry  = "";  my $RecentLogEntry  = "";
 my $ConnectionRetries=2; # Number of connection retries allowed.  my $ConnectionRetries=5; # Number of connection retries allowed.
 my $ConnectionRetriesLeft=2; # Number of connection retries remaining.  my $ConnectionRetriesLeft=5; # Number of connection retries remaining.
 my $LondVersion     = "unknown"; # Version of lond we talk with.  my $LondVersion     = "unknown"; # Version of lond we talk with.
 my $KeyMode         = "";       # e.g. ssl, local, insecure from last connect.  my $KeyMode         = "";       # e.g. ssl, local, insecure from last connect.
 my $LondConnecting  = 0;       # True when a connection is being built.  my $LondConnecting  = 0;       # True when a connection is being built.
   
   
 # DO NOT SET THE NEXT VARIABLE TO NON ZERO!!!!!!!!!!!!!!!  
   
 my $DieWhenIdle     = 0; # When true children die when trimmed -> 0.  my $I_am_child      = 0; # True if this is the child process.
   
 #  #
 #   The hash below gives the HTML format for log messages  #   The hash below gives the HTML format for log messages
Line 146  sub UpdateStatus { Line 151  sub UpdateStatus {
 Makes an entry into the permanent log file.  Makes an entry into the permanent log file.
   
 =cut  =cut
   
 sub LogPerm {  sub LogPerm {
     my $message=shift;      my $message=shift;
     my $execdir=$perlvar{'lonDaemons'};      my $execdir=$perlvar{'lonDaemons'};
     my $now=time;      my $now=time;
     my $local=localtime($now);      my $local=localtime($now);
     my $fh=IO::File->new(">>$execdir/logs/lonnet.perm.log");      my $fh=IO::File->new(">>$execdir/logs/lonnet.perm.log");
       chomp($message);
     print $fh "$now:$message:$local\n";      print $fh "$now:$message:$local\n";
 }  }
   
Line 191  sub Log { Line 198  sub Log {
     my $now   = time;      my $now   = time;
     my $local = localtime($now);      my $local = localtime($now);
     my $finalformat = "$local ($$) [$RemoteHost] [$Status] ";      my $finalformat = "$local ($$) [$RemoteHost] [$Status] ";
     my $finalformat = $finalformat.$format."\n";      $finalformat = $finalformat.$format."\n";
   
     # open the file and put the result.      # open the file and put the result.
   
Line 265  sub SocketDump { Line 272  sub SocketDump {
  and as what we return in a SIGUSR1   and as what we return in a SIGUSR1
   
 =cut  =cut
   
 sub ShowStatus {  sub ShowStatus {
     my $state = shift;      my $state = shift;
     my $now = time;      my $now = time;
Line 275  sub ShowStatus { Line 283  sub ShowStatus {
   
 =pod  =pod
   
 =head 2 SocketTimeout  =head2 SocketTimeout
   
     Called when an action on the socket times out.  The socket is       Called when an action on the socket times out.  The socket is 
    destroyed and any active transaction is failed.     destroyed and any active transaction is failed.
   
   
 =cut  =cut
   
 sub SocketTimeout {  sub SocketTimeout {
     my $Socket = shift;      my $Socket = shift;
     Log("WARNING", "A socket timeout was detected");      Log("WARNING", "A socket timeout was detected");
Line 299  sub SocketTimeout { Line 308  sub SocketTimeout {
     }      }
   
 }  }
   
   #
   #   This function should be called by the child in all cases where it must
   #   exit.  The child process must create a lock file for the AF_UNIX socket
   #   in order to prevent connection requests from lonnet in the time between
   #   process exit and the parent picking up the listen again.
   #
   # Parameters:
   #     exit_code           - Exit status value, however see the next parameter.
   #     message             - If this optional parameter is supplied, the exit
   #                           is via a die with this message.
   #
   sub child_exit {
       my ($exit_code, $message) = @_;
   
       # Regardless of how we exit, we may need to do the lock thing:
   
       #
       #  Create a lock file since there will be a time window
       #  between our exit and the parent's picking up the listen
       #  during which no listens will be done on the
       #  lonnet client socket.
       #
       my $lock_file = &GetLoncSocketPath().".lock";
       open(LOCK,">$lock_file");
       print LOCK "Contents not important";
       close(LOCK);
       unlink(&GetLoncSocketPath());
   
       if ($message) {
    die($message);
       } else {
    exit($exit_code);
       }
   }
 #----------------------------- Timer management ------------------------  #----------------------------- Timer management ------------------------
   
 =pod  =pod
Line 328  sub Tick { Line 372  sub Tick {
     KillSocket($Socket);      KillSocket($Socket);
     $IdleSeconds = 0; # Otherwise all connections get trimmed to fast.      $IdleSeconds = 0; # Otherwise all connections get trimmed to fast.
     UpdateStatus();      UpdateStatus();
     if(($ConnectionCount == 0) && $DieWhenIdle) {      if(($ConnectionCount == 0)) {
  #   &child_exit(0);
  #  Create a lock file since there will be a time window  
  #  between our exit and the parent's picking up the listen  
  #  during which no listens will be done on the  
  #  lonnet client socket.  
  #  
  my $lock_file = GetLoncSocketPath().".lock";  
  open(LOCK,">$lock_file");  
  print LOCK "Contents not important";  
  close(LOCK);  
   
  exit(0);  
     }      }
  }   }
     } else {      } else {
Line 386  sub Tick { Line 420  sub Tick {
  $KeyMode = "";    $KeyMode = ""; 
  $clock_watcher->cancel();   $clock_watcher->cancel();
     }      }
       &UpdateStatus();
 }  }
   
 =pod  =pod
Line 468  the data and Event->w->fd is the socket Line 503  the data and Event->w->fd is the socket
 sub ClientWritable {  sub ClientWritable {
     my $Event    = shift;      my $Event    = shift;
     my $Watcher  = $Event->w;      my $Watcher  = $Event->w;
       if (!defined($Watcher)) {
    &child_exit(-1,'No watcher for event in ClientWritable');
       }
     my $Data     = $Watcher->data;      my $Data     = $Watcher->data;
     my $Socket   = $Watcher->fd;      my $Socket   = $Watcher->fd;
   
Line 531  sub ClientWritable { Line 569  sub ClientWritable {
  }   }
     } else {      } else {
  $Watcher->cancel(); # A delayed request...just cancel.   $Watcher->cancel(); # A delayed request...just cancel.
    return;
     }      }
 }  }
   
Line 570  sub CompleteTransaction { Line 609  sub CompleteTransaction {
  StartClientReply($Transaction, $data);   StartClientReply($Transaction, $data);
     } else { # Delete deferred transaction file.      } else { # Delete deferred transaction file.
  Log("SUCCESS", "A delayed transaction was completed");   Log("SUCCESS", "A delayed transaction was completed");
  LogPerm("S:$Transaction->getClient() :".$Transaction->getRequest());   LogPerm("S:".$Transaction->getClient().":".$Transaction->getRequest());
  unlink $Transaction->getFile();   unlink($Transaction->getFile());
     }      }
 }  }
   
Line 639  sub FailTransaction { Line 678  sub FailTransaction {
   
     if ($ConnectionRetriesLeft > 0) {      if ($ConnectionRetriesLeft > 0) {
  Log("WARNING", "Failing transaction "   Log("WARNING", "Failing transaction "
     .$transaction->getRequest());      .$transaction->getLoggableRequest());
     }      }
     Debug(1, "Failing transaction: ".$transaction->getRequest());      Debug(1, "Failing transaction: ".$transaction->getLoggableRequest());
     if (!$transaction->isDeferred()) { # If the transaction is deferred we'll get to it.      if (!$transaction->isDeferred()) { # If the transaction is deferred we'll get to it.
  my $client  = $transaction->getClient();   my $client  = $transaction->getClient();
  Debug(1," Replying con_lost to ".$transaction->getRequest());   Debug(1," Replying con_lost to ".$transaction->getRequest());
Line 651  sub FailTransaction { Line 690  sub FailTransaction {
 }  }
   
 =pod  =pod
   
 =head1  EmptyQueue  =head1  EmptyQueue
   
   Fails all items in the work queue with con_lost.    Fails all items in the work queue with con_lost.
   Note that each item in the work queue is a transaction.    Note that each item in the work queue is a transaction.
   
 =cut  =cut
   
 sub EmptyQueue {  sub EmptyQueue {
     $ConnectionRetriesLeft--; # Counts as connection failure too.      $ConnectionRetriesLeft--; # Counts as connection failure too.
     while($WorkQueue->Count()) {      while($WorkQueue->Count()) {
Line 672  sub EmptyQueue { Line 713  sub EmptyQueue {
 Close all connections open on lond prior to exit e.g.  Close all connections open on lond prior to exit e.g.
   
 =cut  =cut
   
 sub CloseAllLondConnections {  sub CloseAllLondConnections {
     foreach my $Socket (keys %ActiveConnections) {      foreach my $Socket (keys %ActiveConnections) {
       if(exists($ActiveTransactions{$Socket})) {        if(exists($ActiveTransactions{$Socket})) {
Line 680  sub CloseAllLondConnections { Line 722  sub CloseAllLondConnections {
       KillSocket($Socket);        KillSocket($Socket);
     }      }
 }  }
 =cut  
   
 =pod  =pod
   
Line 702  Parameters: Line 743  Parameters:
   
 nonzero if we are allowed to create a new connection.  nonzero if we are allowed to create a new connection.
   
   
 =cut  =cut
   
 sub KillSocket {  sub KillSocket {
     my $Socket = shift;      my $Socket = shift;
   
Line 915  sub LondReadable { Line 956  sub LondReadable {
  #  We need to be writable for this and probably don't belong   #  We need to be writable for this and probably don't belong
  #  here inthe first place.   #  here inthe first place.
   
  Deubg(6, "SendingRequest state encountered in readable");   Debug(6, "SendingRequest state encountered in readable");
  $Watcher->poll("w");   $Watcher->poll("w");
  $Watcher->cb(\&LondWritable);   $Watcher->cb(\&LondWritable);
   
Line 1113  sub LondWritable { Line 1154  sub LondWritable {
     }      }
           
 }  }
   
 =pod  =pod
           
 =cut  =cut
   
   
 sub QueueDelayed {  sub QueueDelayed {
     Debug(3,"QueueDelayed called");      Debug(3,"QueueDelayed called");
   
Line 1123  sub QueueDelayed { Line 1167  sub QueueDelayed {
   
     Debug(4, "Delayed path: ".$path);      Debug(4, "Delayed path: ".$path);
     opendir(DIRHANDLE, $path);      opendir(DIRHANDLE, $path);
       
     my @alldelayed = grep /\.$RemoteHost$/, readdir DIRHANDLE;      my $host_id_re = '(?:'.join('|',map {quotemeta($_)} (@all_host_ids)).')';
       my @alldelayed = grep(/\.$host_id_re$/, readdir(DIRHANDLE));
     closedir(DIRHANDLE);      closedir(DIRHANDLE);
     my $dfname;      foreach my $dfname (sort(@alldelayed)) {
     my $reqfile;   my $reqfile = "$path/$dfname";
     foreach $dfname (sort  @alldelayed) {   my ($host_id) = ($dfname =~ /\.([^.]*)$/);
  $reqfile = "$path/$dfname";   Debug(4, "queueing ".$reqfile." for $host_id");
  Debug(4, "queueing ".$reqfile);  
  my $Handle = IO::File->new($reqfile);   my $Handle = IO::File->new($reqfile);
  my $cmd    = <$Handle>;   my $cmd    = <$Handle>;
  chomp $cmd; # There may or may not be a newline...   chomp $cmd; # There may or may not be a newline...
  $cmd = $cmd."\n"; # now for sure there's exactly one newline.   $cmd = $cmd."\n"; # now for sure there's exactly one newline.
  my $Transaction = LondTransaction->new($cmd);   my $Transaction = LondTransaction->new("sethost:$host_id:$cmd");
  $Transaction->SetDeferred($reqfile);   $Transaction->SetDeferred($reqfile);
  QueueTransaction($Transaction);   QueueTransaction($Transaction);
     }      }
Line 1159  sub MakeLondConnection { Line 1203  sub MakeLondConnection {
   .GetServerPort());    .GetServerPort());
   
     my $Connection = LondConnection->new(&GetServerHost(),      my $Connection = LondConnection->new(&GetServerHost(),
  &GetServerPort());   &GetServerPort(),
    &GetHostId());
   
     if($Connection eq undef) { # Needs to be more robust later.      if($Connection eq undef) { # Needs to be more robust later.
  Log("CRITICAL","Failed to make a connection with lond.");   Log("CRITICAL","Failed to make a connection with lond.");
Line 1167  sub MakeLondConnection { Line 1212  sub MakeLondConnection {
  return 0; # Failure.   return 0; # Failure.
     }  else {      }  else {
   
    $LondConnecting = 1; # Connection in progress.
  # The connection needs to have writability    # The connection needs to have writability 
  # monitored in order to send the init sequence   # monitored in order to send the init sequence
  # that starts the whole authentication/key   # that starts the whole authentication/key
Line 1174  sub MakeLondConnection { Line 1220  sub MakeLondConnection {
  #   #
  my $Socket = $Connection->GetSocket();   my $Socket = $Connection->GetSocket();
  if($Socket eq undef) {   if($Socket eq undef) {
     die "did not get a socket from the connection";      &child_exit(-1, "did not get a socket from the connection");
  } else {   } else {
     &Debug(9,"MakeLondConnection got socket: ".$Socket);      &Debug(9,"MakeLondConnection got socket: ".$Socket);
  }   }
Line 1197  sub MakeLondConnection { Line 1243  sub MakeLondConnection {
  }   }
  Log("SUCESS", "Created connection ".$ConnectionCount   Log("SUCESS", "Created connection ".$ConnectionCount
     ." to host ".GetServerHost());      ." to host ".GetServerHost());
  $LondConnecting = 1; # Connection in progress.  
  return 1; # Return success.   return 1; # Return success.
     }      }
           
Line 1338  sub ClientRequest { Line 1383  sub ClientRequest {
     $data = $data.$thisread; # Append new data.      $data = $data.$thisread; # Append new data.
     $watcher->data($data);      $watcher->data($data);
     if($data =~ /\n$/) { # Request entirely read.      if($data =~ /\n$/) { # Request entirely read.
  if($data eq "close_connection_exit\n") {   if ($data eq "close_connection_exit\n") {
     Log("CRITICAL",      Log("CRITICAL",
  "Request Close Connection ... exiting");   "Request Close Connection ... exiting");
     CloseAllLondConnections();      CloseAllLondConnections();
     exit;      exit;
    } elsif ($data eq "reset_retries\n") {
       Log("INFO", "Resetting Connection Retries.");
       $ConnectionRetriesLeft = $ConnectionRetries;
       &UpdateStatus();
       my $Transaction = LondTransaction->new($data);
       $Transaction->SetClient($socket);
       StartClientReply($Transaction, "ok\n");
       $watcher->cancel();
       return;
  }   }
  Debug(8, "Complete transaction received: ".$data);   Debug(8, "Complete transaction received: ".$data);
  if($LogTransactions) {   if ($LogTransactions) {
     Log("SUCCESS", "Transaction: '$data'"); # Transaction has \n.      Log("SUCCESS", "Transaction: '$data'"); # Transaction has \n.
  }   }
  my $Transaction = LondTransaction->new($data);   my $Transaction = LondTransaction->new($data);
Line 1356  sub ClientRequest { Line 1410  sub ClientRequest {
   
 }  }
   
   #
   #     Accept a connection request for a client (lonc child) and
   #    start up an event watcher to keep an eye on input from that 
   #    Event.  This can be called both from NewClient and from
   #    ChildProcess.
   # Parameters:
   #    $socket       - The listener socket.
   # Returns:
   #   NONE
   # Side Effects:
   #    An event is made to watch the accepted connection.
   #    Active clients hash is updated to reflect the new connection.
   #    The client connection count is incremented.
   #
   sub accept_client {
       my ($socket) = @_;
   
       Debug(8, "Entering accept for lonc UNIX socket\n");
       my $connection = $socket->accept(); # Accept the client connection.
       Debug(8,"Connection request accepted from "
     .GetPeername($connection, AF_UNIX));
   
   
       my $description = sprintf("Connection to lonc client %d",
         $ClientConnection);
       Debug(9, "Creating event named: ".$description);
       Event->io(cb      => \&ClientRequest,
         poll    => 'r',
         desc    => $description,
         data    => "",
         fd      => $connection);
       $ActiveClients{$connection} = $ClientConnection;
       $ClientConnection++;
   }
   
 =pod  =pod
   
Line 1374  sub NewClient { Line 1462  sub NewClient {
     my $event      = shift; # Get the event parameters.      my $event      = shift; # Get the event parameters.
     my $watcher    = $event->w;       my $watcher    = $event->w; 
     my $socket     = $watcher->fd; # Get the event' socket.      my $socket     = $watcher->fd; # Get the event' socket.
     my $connection = $socket->accept(); # Accept the client connection.  
     Debug(8,"Connection request accepted from "  
   .GetPeername($connection, AF_UNIX));  
   
   
     my $description = sprintf("Connection to lonc client %d",      &accept_client($socket);
       $ClientConnection);  
     Debug(9, "Creating event named: ".$description);  
     Event->io(cb      => \&ClientRequest,  
       poll    => 'r',  
       desc    => $description,  
       data    => "",  
       fd      => $connection);  
     $ActiveClients{$connection} = $ClientConnection;  
     $ClientConnection++;  
 }  }
   
 =pod  =pod
Line 1428  sub GetServerHost { Line 1503  sub GetServerHost {
   
 =pod  =pod
   
   =head2 GetServerId
   
   Returns the hostid whose lond we talk with.
   
   =cut
   
   sub GetHostId {
       return $RemoteHostId; # Setup by the fork.
   }
   
   =pod
   
 =head2 GetServerPort  =head2 GetServerPort
   
 Returns the lond port number.  Returns the lond port number.
Line 1455  another event handler to subess requests Line 1542  another event handler to subess requests
 =cut  =cut
   
 sub SetupLoncListener {  sub SetupLoncListener {
       my ($host,$SocketName) = @_;
       if (!$host) { $host = &GetServerHost(); }
       if (!$SocketName) { $SocketName = &GetLoncSocketPath($host); }
   
     my $host       = GetServerHost(); # Default host.  
     if (@_) {  
  ($host)    = @_ # Override host with parameter.  
     }  
   
     my $socket;  
     my $SocketName = GetLoncSocketPath($host);  
     unlink($SocketName);      unlink($SocketName);
   
       my $socket;
     unless ($socket =IO::Socket::UNIX->new(Local  => $SocketName,      unless ($socket =IO::Socket::UNIX->new(Local  => $SocketName,
     Listen => 250,       Listen => 250, 
     Type   => SOCK_STREAM)) {      Type   => SOCK_STREAM)) {
  die "Failed to create a lonc listner socket";   if($I_am_child) {
       &child_exit(-1, "Failed to create a lonc listener socket");
    } else {
       die "Failed to create a lonc listner socket";
    }
     }      }
     return $socket;      return $socket;
 }  }
Line 1499  into the status file. Line 1589  into the status file.
   
 We also use this to reset the retries count in order to allow the  We also use this to reset the retries count in order to allow the
 client to retry connections with a previously dead server.  client to retry connections with a previously dead server.
   
 =cut  =cut
   
 sub ChildStatus {  sub ChildStatus {
Line 1507  sub ChildStatus { Line 1598  sub ChildStatus {
   
     Debug(2, "Reporting child status because : ".$watcher->data);      Debug(2, "Reporting child status because : ".$watcher->data);
     my $docdir = $perlvar{'lonDocRoot'};      my $docdir = $perlvar{'lonDocRoot'};
     my $fh = IO::File->new(">>$docdir/lon-status/loncstatus.txt");      
     print $fh $$."\t".$RemoteHost."\t".$Status."\t".      open(LOG,">>$docdir/lon-status/loncstatus.txt");
       flock(LOG,LOCK_EX);
       print LOG $$."\t".$RemoteHost."\t".$Status."\t".
  $RecentLogEntry."\n";   $RecentLogEntry."\n";
     #      #
     #  Write out information about each of the connections:      #  Write out information about each of the connections:
     #      #
     if ($DebugLevel > 2) {      if ($DebugLevel > 2) {
  print $fh "Active connection statuses: \n";   print LOG "Active connection statuses: \n";
  my $i = 1;   my $i = 1;
  print STDERR  "================================= Socket Status Dump:\n";   print STDERR  "================================= Socket Status Dump:\n";
  foreach my $item (keys %ActiveConnections) {   foreach my $item (keys %ActiveConnections) {
     my $Socket = $ActiveConnections{$item}->data;      my $Socket = $ActiveConnections{$item}->data;
     my $state  = $Socket->GetState();      my $state  = $Socket->GetState();
     print $fh "Connection $i State: $state\n";      print LOG "Connection $i State: $state\n";
     print STDERR "---------------------- Connection $i \n";      print STDERR "---------------------- Connection $i \n";
     $Socket->Dump(-1); # Ensure it gets dumped..      $Socket->Dump(-1); # Ensure it gets dumped..
     $i++;      $i++;
  }   }
     }      }
       flock(LOG,LOCK_UN);
       close(LOG);
     $ConnectionRetriesLeft = $ConnectionRetries;      $ConnectionRetriesLeft = $ConnectionRetries;
       UpdateStatus();
 }  }
   
 =pod  =pod
Line 1547  sub SignalledToDeath { Line 1643  sub SignalledToDeath {
     chomp($signal);      chomp($signal);
     Log("CRITICAL", "Abnormal exit.  Child $$ for $RemoteHost "      Log("CRITICAL", "Abnormal exit.  Child $$ for $RemoteHost "
  ."died through "."\"$signal\"");   ."died through "."\"$signal\"");
     LogPerm("F:lonc: $$ on $RemoteHost signalled to death: "      #LogPerm("F:lonc: $$ on $RemoteHost signalled to death: "
     ."\"$signal\"");  #    ."\"$signal\"");
     exit 0;      exit 0;
   
 }  }
   
   =pod
   
 =head2 ToggleDebug  =head2 ToggleDebug
   
 This sub toggles trace debugging on and off.  This sub toggles trace debugging on and off.
Line 1568  sub ToggleDebug { Line 1666  sub ToggleDebug {
   
 }  }
   
   =pod
   
 =head2 ChildProcess  =head2 ChildProcess
   
 This sub implements a child process for a single lonc daemon.  This sub implements a child process for a single lonc daemon.
   Optional parameter:
      $socket  - if provided, this is a socket already open for listen
                 on the client socket. Otherwise, a new listen is set up.
   
 =cut  =cut
   
 sub ChildProcess {  sub ChildProcess {
       #  We've inherited all the
       #  events of our parent and those have to be cancelled or else
       #  all holy bloody chaos will result.. trust me, I already made
       #  >that< mistake.
   
       my $host = GetServerHost();
       foreach my $listener (keys %parent_dispatchers) {
    my $watcher = $parent_dispatchers{$listener};
    my $s       = $watcher->fd;
    if ($listener ne $host) { # Close everyone but me.
       Debug(5, "Closing listen socket for $listener");
       $s->close();
    }
    Debug(5, "Killing watcher for $listener");
   
    $watcher->cancel();
    delete($parent_dispatchers{$listener});
   
       }
   
       #  kill off the parent's signal handlers too!  
       #
   
       for my $handler (keys %parent_handlers) {
    my $watcher = $parent_handlers{$handler};
    $watcher->cancel();
    delete($parent_handlers{$handler});
       }
   
       $I_am_child    = 1; # Seems like in spite of it all I may still getting
                                   # parent event dispatches.. flag I'm a child.
   
   
     #      #
     #  Signals must be handled by the Event framework...      #  Signals must be handled by the Event framework...
 #      #
   
     Event->signal(signal   => "QUIT",      Event->signal(signal   => "QUIT",
   cb       => \&SignalledToDeath,    cb       => \&SignalledToDeath,
Line 1596  sub ChildProcess { Line 1730  sub ChildProcess {
   cb       => \&ToggleDebug,    cb       => \&ToggleDebug,
   data     => "INT");    data     => "INT");
   
           #  Figure out if we got passed a socket or need to open one to listen for
     my $socket =  SetupLoncListener();      #  client requests.
   
       my ($socket) = @_;
       if (!$socket) {
   
    $socket =  SetupLoncListener();
       }
       #  Establish an event to listen for client connection requests.
   
   
     Event->io(cb   => \&NewClient,      Event->io(cb   => \&NewClient,
       poll => 'r',        poll => 'r',
       desc => 'Lonc Listener Unix Socket',        desc => 'Lonc Listener Unix Socket',
       fd   => $socket);        fd   => $socket);
           
     $Event::Debuglevel = $DebugLevel;      $Event::DebugLevel = $DebugLevel;
           
     Debug(9, "Making initial lond connection for ".$RemoteHost);      Debug(9, "Making initial lond connection for ".$RemoteHost);
   
 # Setup the initial server connection:  # Setup the initial server connection:
           
      # &MakeLondConnection(); // let first work requirest do it.       # &MakeLondConnection(); // let first work request do it.
   
       #  need to accept the connection since the event may  not fire.
   
       &accept_client($socket);
   
     Debug(9,"Entering event loop");      Debug(9,"Entering event loop");
     my $ret = Event::loop(); #  Start the main event loop.      my $ret = Event::loop(); #  Start the main event loop.
           
           
     die "Main event loop exited!!!";      &child_exit (-1,"Main event loop exited!!!");
 }  }
   
 #  Create a new child for host passed in:  #  Create a new child for host passed in:
   
 sub CreateChild {  sub CreateChild {
     my $host = shift;      my ($host, $hostid) = @_;
   
     my $sigset = POSIX::SigSet->new(SIGINT);      my $sigset = POSIX::SigSet->new(SIGINT);
     sigprocmask(SIG_BLOCK, $sigset);      sigprocmask(SIG_BLOCK, $sigset);
Line 1631  sub CreateChild { Line 1777  sub CreateChild {
     my $pid          = fork;      my $pid          = fork;
     if($pid) { # Parent      if($pid) { # Parent
  $RemoteHost = "Parent";   $RemoteHost = "Parent";
  $ChildHash{$pid} = $host;   $ChildPid{$pid} = $host;
  $HostToPid{$host}= $pid;  
  sigprocmask(SIG_UNBLOCK, $sigset);   sigprocmask(SIG_UNBLOCK, $sigset);
    undef(@all_host_ids);
     } else { # child.      } else { # child.
    $RemoteHostId = $hostid;
  ShowStatus("Connected to ".$RemoteHost);   ShowStatus("Connected to ".$RemoteHost);
  $SIG{INT} = 'DEFAULT';   $SIG{INT} = 'DEFAULT';
  sigprocmask(SIG_UNBLOCK, $sigset);   sigprocmask(SIG_UNBLOCK, $sigset);
  ChildProcess; # Does not return.   &ChildProcess(); # Does not return.
     }      }
   }
   
   # parent_client_connection:
   #    Event handler that processes client connections for the parent process.
   #    This sub is called when the parent is listening on a socket and
   #    a connection request arrives.  We must:
   #     Start a child process to accept the connection request.
   #     Kill our listen on the socket.
   # Parameter:
   #    event       - The event object that was created to monitor this socket.
   #                  event->w->fd is the socket.
   # Returns:
   #    NONE
   #
   sub parent_client_connection {
       if ($I_am_child) {
    #  Should not get here, but seem to anyway:
    &Debug(5," Child caught parent client connection event!!");
    my ($event) = @_;
    my $watcher = $event->w;
    $watcher->cancel(); # Try to kill it off again!!
       } else {
    &Debug(9, "parent_client_connection");
    my ($event)   = @_;
    my $watcher   = $event->w;
    my $socket    = $watcher->fd;
    my $connection = $socket->accept(); # Accept the client connection.
    Event->io(cb      => \&get_remote_hostname,
     poll    => 'r',
     data    => "",
     fd      => $connection);
       }
 }  }
   
   sub get_remote_hostname {
       my ($event)   = @_;
       my $watcher   = $event->w;
       my $socket    = $watcher->fd;
   
       my $thisread;
       my $rv = $socket->recv($thisread, POSIX::BUFSIZ, 0);
       Debug(8, "rcv:  data length = ".length($thisread)." read =".$thisread);
       if (!defined($rv) || length($thisread) == 0) {
    # Likely eof on socket.
    Debug(5,"Client Socket closed on lonc for p_c_c");
    close($socket);
    $watcher->cancel();
    return;
       }
   
       my $data    = $watcher->data().$thisread;
       $watcher->data($data);
       if($data =~ /\n$/) { # Request entirely read.
    chomp($data);
       } else {
    return;
       }
   
       &Debug(5,"Creating child for $data (parent_client_connection)");
       (my $hostname,my $lonid,@all_host_ids) = split(':',$data);
       $ChildHost{$hostname}++;
       if ($ChildHost{$hostname} == 1) {
    &CreateChild($hostname,$lonid);
       } else {
    &Log('WARNING',"Request for a second child on $hostname");
       }
       # Clean up the listen since now the child takes over until it exits.
       $watcher->cancel(); # Nolonger listening to this event
       $socket->send("done\n");
       $socket->close();
   }
   
   # parent_listen:
   #    Opens a socket and starts a listen for the parent process on a client UNIX
   #    domain socket.
   #
   #    This involves:
   #       Creating a socket for listen.
   #       Removing any socket lock file
   #       Adding an event handler for this socket becoming readable
   #         To the parent's event dispatcher.
   # Parameters:
   #    loncapa_host    - LonCAPA cluster name of the host represented by the client
   #                      socket.
   # Returns:
   #    NONE
   #
   sub parent_listen {
       my ($loncapa_host) = @_;
       Debug(5, "parent_listen: $loncapa_host");
   
       my ($socket,$file);
       if (!$loncapa_host) {
    $loncapa_host = 'common_parent';
    $file         = $perlvar{'lonSockCreate'};
       } else {
    $file         = &GetLoncSocketPath($loncapa_host);
       }
       $socket = &SetupLoncListener($loncapa_host,$file);
   
       $listening_to{$socket} = $loncapa_host;
       if (!$socket) {
    die "Unable to create a listen socket for $loncapa_host";
       }
       
       my $lock_file = $file.".lock";
       unlink($lock_file); # No problem if it doesn't exist yet [startup e.g.]
   
       my $watcher = 
    Event->io(cb    => \&parent_client_connection,
     poll  => 'r',
     desc  => "Parent listener unix socket ($loncapa_host)",
     data => "",
     fd    => $socket);
       $parent_dispatchers{$loncapa_host} = $watcher;
   
   }
   
   sub parent_clean_up {
       my ($loncapa_host) = @_;
       Debug(1, "parent_clean_up: $loncapa_host");
   
       my $socket_file = &GetLoncSocketPath($loncapa_host);
       unlink($socket_file); # No problem if it doesn't exist yet [startup e.g.]
       my $lock_file   = $socket_file.".lock";
       unlink($lock_file); # No problem if it doesn't exist yet [startup e.g.]
   }
   
   
   
   #    This sub initiates a listen on the common unix domain lonc client socket.
   #    loncnew starts up with no children, and only spawns off children when a
   #    connection request occurs on the common client unix socket.  The spawned
   #    child continues to run until it has been idle a while at which point it
   #    eventually exits and once more the parent picks up the listen.
   #
   #  Parameters:
   #      NONE
   #  Implicit Inputs:
   #    The configuration file that has been read in by LondConnection.
   #  Returns:
   #     NONE
   #
   sub listen_on_common_socket {
       Debug(5, "listen_on_common_socket");
       &parent_listen();
   }
   
   #   server_died is called whenever a child process exits.
   #   Since this is dispatched via a signal, we must process all
   #   dead children until there are no more left.  The action
   #   is to:
   #      - Remove the child from the bookeeping hashes
   #      - Re-establish a listen on the unix domain socket associated
   #        with that host.
   # Parameters:
   #    The event, but we don't actually care about it.
   sub server_died {
       &Debug(9, "server_died called...");
       
       while(1) { # Loop until waitpid nowait fails.
    my $pid = waitpid(-1, WNOHANG);
    if($pid <= 0) {
       return; # Nothing left to wait for.
    }
    # need the host to restart:
   
    my $host = $ChildPid{$pid};
    if($host) { # It's for real...
       &Debug(9, "Caught sigchild for $host");
       delete($ChildPid{$pid});
       delete($ChildHost{$host});
       &parent_clean_up($host);
   
    } else {
       &Debug(5, "Caught sigchild for pid not in hosts hash: $pid");
    }
       }
   
   }
   
 #  #
 #  Parent process logic pass 1:  #  Parent process logic pass 1:
 #   For each entry in the hosts table, we will  #   For each entry in the hosts table, we will
Line 1691  ShowStatus("Forking node servers"); Line 2016  ShowStatus("Forking node servers");
 Log("CRITICAL", "--------------- Starting children ---------------");  Log("CRITICAL", "--------------- Starting children ---------------");
   
 LondConnection::ReadConfig;               # Read standard config files.  LondConnection::ReadConfig;               # Read standard config files.
 my $HostIterator = LondConnection::GetHostIterator;  
   
 if ($DieWhenIdle) {  $RemoteHost = "[parent]";
     print "Die when idle socket monitoring is not yet implemented\n";  &listen_on_common_socket();
     exit(-1);  
 } else {  
       
     while (! $HostIterator->end()) {  
   
  my $hostentryref = $HostIterator->get();  
  CreateChild($hostentryref->[0]);  
  $HostHash{$hostentryref->[0]} = $hostentryref->[4];  
  $HostIterator->next();  
     }  
 }  
   
 $RemoteHost = "Parent Server";  $RemoteHost = "Parent Server";
   
Line 1713  $RemoteHost = "Parent Server"; Line 2026  $RemoteHost = "Parent Server";
   
 ShowStatus("Parent keeping the flock");  ShowStatus("Parent keeping the flock");
   
 #  
 #   Set up parent signals:  
 #  
   
 if ($DieWhenIdle) {  # We need to setup a SIGChild event to handle the exit (natural or otherwise)
     print "Die when idle main processing not yet implemented";  # of the children.
     exit (-1);  
 } else {  
       
     $SIG{INT}  = \&Terminate;  
     $SIG{TERM} = \&Terminate;   
     $SIG{HUP}  = \&Restart;  
     $SIG{USR1} = \&CheckKids;   
     $SIG{USR2} = \&UpdateKids; # LonManage update request.  
       
     while(1) {  
  my $deadchild = wait();  
  if(exists $ChildHash{$deadchild}) { # need to restart.  
     my $deadhost = $ChildHash{$deadchild};  
     delete($HostToPid{$deadhost});  
     delete($ChildHash{$deadchild});  
     Log("WARNING","Lost child pid= ".$deadchild.  
  "Connected to host ".$deadhost);  
     Log("INFO", "Restarting child procesing ".$deadhost);  
     CreateChild($deadhost);  
  }  
     }  
 }  
   
   Event->signal(cb       => \&server_died,
         desc     => "Child exit handler",
         signal   => "CHLD");
   
   
   # Set up all the other signals we set up.
   
   $parent_handlers{INT} = Event->signal(cb       => \&Terminate,
         desc     => "Parent INT handler",
         signal   => "INT");
   $parent_handlers{TERM} = Event->signal(cb       => \&Terminate,
          desc     => "Parent TERM handler",
          signal   => "TERM");
   $parent_handlers{HUP}  = Event->signal(cb       => \&KillThemAll,
          desc     => "Parent HUP handler.",
          signal   => "HUP");
   $parent_handlers{USR1} = Event->signal(cb       => \&CheckKids,
          desc     => "Parent USR1 handler",
          signal   => "USR1");
   $parent_handlers{USR2} = Event->signal(cb       => \&UpdateKids,
          desc     => "Parent USR2 handler.",
          signal   => "USR2");
   
   #  Start procdesing events.
   
   $Event::DebugLevel = $DebugLevel;
   Debug(9, "Parent entering event loop");
   my $ret = Event::loop();
   die "Main Event loop exited: $ret";
   
 =pod  =pod
   
Line 1762  sub CheckKids { Line 2079  sub CheckKids {
     my $now=time;      my $now=time;
     my $local=localtime($now);      my $local=localtime($now);
     print $fh "LONC status $local - parent $$ \n\n";      print $fh "LONC status $local - parent $$ \n\n";
     foreach my $pid (keys %ChildHash) {      foreach my $host (keys %parent_dispatchers) {
    print $fh "LONC Parent process listening for $host\n";
       }
       foreach my $pid (keys %ChildPid) {
  Debug(2, "Sending USR1 -> $pid");   Debug(2, "Sending USR1 -> $pid");
  kill 'USR1' => $pid; # Tell Child to report status.   kill 'USR1' => $pid; # Tell Child to report status.
  sleep 1; # Wait so file doesn't intermix.  
     }      }
   
 }  }
   
 =pod  =pod
Line 1799  sub UpdateKids { Line 2119  sub UpdateKids {
   
     Log("INFO", "Updating connections via SIGUSR2");      Log("INFO", "Updating connections via SIGUSR2");
   
     #  Just in case we need to kill our own lonc, we wait a few seconds to      #  I'm not sure what I was thinking in the first implementation.
     #  give it a chance to receive and relay lond's response to the       # someone will have to work hard to convince me the effect is any
     #  re-init command.      # different than Restart, especially now that we don't start up 
     #      # per host servers automatically, may as well just restart.
       # The down side is transactions that are in flight will get timed out
     sleep(2); # Wait a couple of seconds.      # (lost unless they are critical).
   
     my %hosts;                   # Indexed by loncapa hostname, value=ip.  
       
     # Need to re-read  the host table:  
       
       
     LondConnection::ReadConfig();  
     my $I = LondConnection::GetHostIterator;  
     while (! $I->end()) {  
  my $item = $I->get();  
  $hosts{$item->[0]} = $item->[4];  
  $I->next();  
     }  
   
     #  The logic below is written for clarity not for efficiency.  
     #  Since I anticipate that this function is only rarely called, that's  
     #  appropriate.  There are certainly ways to combine the loops below,  
     #  and anyone wishing to obscure the logic is welcome to go for it.  
     #  Note that we don't re-direct sigchild.  Instead we do what's needed  
     #  to the data structures that keep track of children to ensure that  
     #  when sigchild is honored, no new child is born.  
     #  
   
     #  For each existing child; if it's host doesn't exist, kill the child.  
   
     foreach my $child (keys %ChildHash) {      &KillThemAll();
  my $oldhost = $ChildHash{$child};  
  if (!(exists $hosts{$oldhost})) {  
     Log("CRITICAL", "Killing child for $oldhost  host no longer exists");  
     delete $ChildHash{$child};  
     delete $HostToPid{$oldhost};  
     kill 'QUIT' => $child;  
  }  
     }  
     # For each remaining existing child; if it's host's ip has changed,  
     # Restart the child on the new IP.  
   
     foreach my $child (keys %ChildHash) {  
  my $oldhost = $ChildHash{$child};  
  my $oldip   = $HostHash{$oldhost};  
  if ($hosts{$oldhost} ne $oldip) {  
   
     # kill the old child.  
   
     Log("CRITICAL", "Killing child for $oldhost host ip has changed...");  
     delete $ChildHash{$child};  
     delete $HostToPid{$oldhost};  
     kill 'QUIT' => $child;  
   
     # Do the book-keeping needed to start a new child on the  
     # new ip.  
   
     $HostHash{$oldhost} = $hosts{$oldhost};  
     CreateChild($oldhost);  
  }  
     }  
     # Finally, for each new host, not in the host hash, create a  
     # enter the host and create a new child.  
     # Force a status display of any existing process.  
   
     foreach my $host (keys %hosts) {  
  if(!(exists $HostHash{$host})) {  
     Log("INFO", "New host $host discovered in hosts.tab...");  
     $HostHash{$host} = $hosts{$host};  
     CreateChild($host);  
  } else {  
     kill 'HUP' => $HostToPid{$host};    # status display.  
  }  
     }  
 }  }
   
   
Line 1892  sub Restart { Line 2145  sub Restart {
     Log("CRITICAL", "Restarting");      Log("CRITICAL", "Restarting");
     my $execdir = $perlvar{'lonDaemons'};      my $execdir = $perlvar{'lonDaemons'};
     unlink("$execdir/logs/lonc.pid");      unlink("$execdir/logs/lonc.pid");
     exec("$execdir/loncnew");      exec("$executable");
 }  }
   
 =pod  =pod
Line 1906  SIGHUP.  Responds to sigint and sigterm. Line 2159  SIGHUP.  Responds to sigint and sigterm.
   
 sub KillThemAll {  sub KillThemAll {
     Debug(2, "Kill them all!!");      Debug(2, "Kill them all!!");
     local($SIG{CHLD}) = 'IGNORE';      # Our children >will< die.      
     foreach my $pid (keys %ChildHash) {      #local($SIG{CHLD}) = 'IGNORE';
  my $serving = $ChildHash{$pid};      # Our children >will< die.
       # but we need to catch their death and cleanup after them in case this is 
       # a restart set of kills
       my @allpids = keys(%ChildPid);
       foreach my $pid (@allpids) {
    my $serving = $ChildPid{$pid};
  ShowStatus("Nicely Killing lonc for $serving pid = $pid");   ShowStatus("Nicely Killing lonc for $serving pid = $pid");
  Log("CRITICAL", "Nicely Killing lonc for $serving pid = $pid");   Log("CRITICAL", "Nicely Killing lonc for $serving pid = $pid");
  kill 'QUIT' => $pid;   kill 'QUIT' => $pid;
     }      }
       ShowStatus("Finished killing child processes off.");
   
 }  }
   
   
Line 1926  sub really_kill_them_all_dammit Line 2183  sub really_kill_them_all_dammit
 {  {
     Debug(2, "Kill them all Dammit");      Debug(2, "Kill them all Dammit");
     local($SIG{CHLD} = 'IGNORE'); # In case some purist reenabled them.      local($SIG{CHLD} = 'IGNORE'); # In case some purist reenabled them.
     foreach my $pid (keys %ChildHash) {      foreach my $pid (keys %ChildPid) {
  my $serving = $ChildHash{$pid};   my $serving = $ChildPid{$pid};
  &ShowStatus("Nastily killing lonc for $serving pid = $pid");   &ShowStatus("Nastily killing lonc for $serving pid = $pid");
  Log("CRITICAL", "Nastily killing lonc for $serving pid = $pid");   Log("CRITICAL", "Nastily killing lonc for $serving pid = $pid");
  kill 'KILL' => $pid;   kill 'KILL' => $pid;
  delete($ChildHash{$pid});   delete($ChildPid{$pid});
  my $execdir = $perlvar{'lonDaemons'};   my $execdir = $perlvar{'lonDaemons'};
  unlink("$execdir/logs/lonc.pid");   unlink("$execdir/logs/lonc.pid");
     }      }
 }  }
   
 =pod  =pod
   
 =head1 Terminate  =head1 Terminate
Line 1958  sub Terminate { Line 2216  sub Terminate {
     exit 0;      exit 0;
   
 }  }
   
   sub my_hostname {
       use Sys::Hostname;
       my $name = &hostname();
       &Debug(9,"Name is $name");
       return $name;
   }
   
 =pod  =pod
   
 =head1 Theory  =head1 Theory
Line 1999  A hash of lond connections that have no Line 2265  A hash of lond connections that have no
 can be closed if they are idle for a long enough time.  can be closed if they are idle for a long enough time.
   
 =cut  =cut
   
   =pod
   
   =head1 Log messages
   
   The following is a list of log messages that can appear in the 
   lonc.log file.  Each log file has a severity and a message.
   
   =over 2
   
   =item Warning  A socket timeout was detected
   
   If there are pending transactions in the socket's queue,
   they are failed (saved if critical).  If the connection
   retry count gets exceeded by this, the
   remote host is marked as dead.
   Called when timeouts occured during the connection and
   connection dialog with a remote host.
   
   =item Critical Host makred DEAD <hostname>   
   
   The numer of retry counts for contacting a host was
   exceeded. The host is marked dead an no 
   further attempts will be made by that child.
   
   =item Info lonc pipe client hung up on us     
   
   Write to the client pipe indicated no data transferred
   Socket to remote host is shut down.  Reply to the client 
   is discarded.  Note: This is commented out in &ClientWriteable
   
   =item Success  Reply from lond: <data>   
   
   Can be enabled for debugging by setting LogTransactions to nonzero.
   Indicates a successful transaction with lond, <data> is the data received
   from the remote lond.
   
   =item Success A delayed transaction was completed  
   
   A transaction that must be reliable was executed and completed
   as lonc restarted.  This is followed by a mesage of the form
   
     S: client-name : request
   
   =item WARNING  Failing transaction <cmd>:<subcmd>  
   
   Transaction failed on a socket, but the failure retry count for the remote
   node has not yet been exhausted (the node is not yet marked dead).
   cmd is the command, subcmd is the subcommand.  This results from a con_lost
   when communicating with lond.
   
   =item WARNING Shutting down a socket     
   
   Called when a socket is being closed to lond.  This is emitted both when 
   idle pruning is being done and when the socket has been disconnected by the remote.
   
   =item WARNING Lond connection lost.
   
   Called when a read from lond's socket failed indicating lond has closed the 
   connection or died.  This should be followed by one or more
   
    "WARNING Failing transaction..." msgs for each in-flight or queued transaction.
   
   =item INFO Connected to lond version:  <version> 
   
   When connection negotiation is complete, the lond version is requested and logged here.
   
   =item SUCCESS Connection n to host now ready for action
   
   Emitted when connection has been completed with lond. n is then number of 
   concurrent connections and host, the host to which the connection has just
   been established.
   
   =item WARNING Connection to host has been disconnected
   
   Write to a lond resulted in failure status.  Connection to lond is dropped.
   
   =item SUCCESS Created connection n to host host 
   
   Initial connection request to host..(before negotiation).
   
   =item CRITICAL Request Close Connection ... exiting
   
   Client has sent "close_connection_exit"   The loncnew server is exiting.
   
   =item INFO Resetting Connection Retries 
   
   Client has sent "reset_retries" The lond connection retries are reset to zero for the
   corresponding lond.
   
   =item SUCCESS Transaction <data>
   
   Only emitted if the global variable $LogTransactions was set to true.
   A client has requested a lond transaction <data> is the contents of the request.
   
   =item SUCCESS Toggled transaction logging <LogTransactions>
                                       
   The state of the $LogTransactions global has been toggled, and its current value
   (after being toggled) is displayed.  When non zero additional logging of transactions
   is enabled for debugging purposes.  Transaction logging is toggled on receipt of a USR2
   signal.
   
   =item CRITICAL Abnormal exit. Child <pid> for <host> died thorugh signal.
   
   QUIT signal received.  lonc child process is exiting.
   
   =item SUCCESS New debugging level for <RemoteHost> now <DebugLevel>
                                       
   Debugging toggled for the host loncnew is talking with.
   Currently debugging is a level based scheme with higher number 
   conveying more information.  The daemon starts out at
   DebugLevel 0 and can toggle back and forth between that and
   DebugLevel 2  These are controlled by
   the global variables $DebugLevel and $NextDebugLevel
   The debug level can go up to 9.
   SIGINT toggles the debug level.  The higher the debug level the 
   more debugging information is spewed.  See the Debug
   sub in loncnew.
   
   =item CRITICAL Forking server for host  
   
   A child is being created to service requests for the specified host.
   
   
   =item WARNING Request for a second child on hostname
                                       
   Somehow loncnew was asked to start a second child on a host that already had a child
   servicing it.  This request is not honored, but themessage is emitted.  This could happen
   due to a race condition.  When a client attempts to contact loncnew for a new host, a child
   is forked off to handle the requests for that server.  The parent then backs off the Unix
   domain socket leaving it for the child to service all requests.  If in the time between
   creating the child, and backing off, a new connection request comes in to the unix domain
   socket, this could trigger (unlikely but remotely possible),.
   
   =item CRITICAL ------ Starting Children ----
   
   This message should probably be changed to "Entering event loop"  as the loncnew only starts
   children as needed.  This message is emitted as new events are established and
   the event processing loop is entered.
   
   =item INFO Updating connections via SIGUSR2
                                       
   SIGUSR2 received. The original code would kill all clients, re-read the host file,
   then restart children for each host.  Now that childrean aree started on demand, this
   just kills all child processes and lets requests start them as needed again.
   
   
   =item CRITICAL Restarting
   
   SigHUP received.  all the children are killed and the script exec's itself to start again.
   
   =item CRITICAL Nicely killing lonc for host pid = <pid>
   
   Attempting to kill the child that is serving the specified host (pid given) cleanly via
   SIGQUIT  The child should handle that, clean up nicely and exit.
   
   =item CRITICAL Nastily killing lonc for host pid = <pid>
   
   The child specified did not die when requested via SIGQUIT.  Therefore it is killed
   via SIGKILL.
   
   =item CRITICAL Asked to kill children.. first be nice..
   
   In the parent's INT handler.  INT kills the child processes.  This inidicate loncnew
   is about to attempt to kill all known children via SIGQUIT.  This message should be followed 
   by one "Nicely killing" message for each extant child.
   
   =item CRITICAL Now kill children nasty 
   
   In the parent's INT handler. remaining children are about to be killed via
   SIGKILL. Should be followed by a Nastily killing... for each lonc child that 
   refused to die.
   
   =item CRITICAL Master process exiting
   
   In the parent's INT handler. just prior to the exit 0 call.
   
   =back
   
   =cut

Removed from v.1.60  
changed lines
  Added in v.1.89


FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>