--- loncom/lond 2004/03/08 20:59:41 1.180
+++ loncom/lond 2006/02/09 23:41:22 1.318.2.4
@@ -2,7 +2,7 @@
# The LearningOnline Network
# lond "LON Daemon" Server (port "LOND" 5663)
#
-# $Id: lond,v 1.180 2004/03/08 20:59:41 albertel Exp $
+# $Id: lond,v 1.318.2.4 2006/02/09 23:41:22 albertel Exp $
#
# Copyright Michigan State University Board of Trustees
#
@@ -45,25 +45,38 @@ use Authen::Krb4;
use Authen::Krb5;
use lib '/home/httpd/lib/perl/';
use localauth;
+use localenroll;
+use localstudentphoto;
use File::Copy;
+use File::Find;
use LONCAPA::ConfigFileEdit;
+use LONCAPA::lonlocal;
+use LONCAPA::lonssl;
+use Fcntl qw(:flock);
+use Symbol;
my $DEBUG = 0; # Non zero to enable debug log entries.
my $status='';
my $lastlog='';
+my $lond_max_wait_time = 13;
-my $VERSION='$Revision: 1.180 $'; #' stupid emacs
+my $VERSION='$Revision: 1.318.2.4 $'; #' stupid emacs
my $remoteVERSION;
-my $currenthostid;
+my $currenthostid="default";
my $currentdomainid;
my $client;
-my $clientip;
-my $clientname;
+my $clientip; # IP address of client.
+my $clientname; # LonCAPA name of client.
my $server;
-my $thisserver;
+my $thisserver; # DNS of us.
+
+my $keymode;
+
+my $cipher; # Cipher key negotiated with client
+my $tmpsnum = 0; # Id of tmpputs.
#
# Connection type is:
@@ -74,31 +87,49 @@ my $thisserver;
my $ConnectionType;
-my %hostid;
-my %hostdom;
-my %hostip;
+my %hostid; # ID's for hosts in cluster by ip.
+my %hostdom; # LonCAPA domain for hosts in cluster.
+my %hostname; # DNSname -> ID's mapping.
+my %hostip; # IPs for hosts in cluster.
+my %hostdns; # ID's of hosts looked up by DNS name.
my %managers; # Ip -> manager names
my %perlvar; # Will have the apache conf defined perl vars.
#
+# The hash below is used for command dispatching, and is therefore keyed on the request keyword.
+# Each element of the hash contains a reference to an array that contains:
+# A reference to a sub that executes the request corresponding to the keyword.
+# A flag that is true if the request must be encoded to be acceptable.
+# A mask with bits as follows:
+# CLIENT_OK - Set when the function is allowed by ordinary clients
+# MANAGER_OK - Set when the function is allowed to manager clients.
+#
+my $CLIENT_OK = 1;
+my $MANAGER_OK = 2;
+my %Dispatcher;
+
+
+#
# The array below are password error strings."
#
my $lastpwderror = 13; # Largest error number from lcpasswd.
my @passwderrors = ("ok",
- "lcpasswd must be run as user 'www'",
- "lcpasswd got incorrect number of arguments",
- "lcpasswd did not get the right nubmer of input text lines",
- "lcpasswd too many simultaneous pwd changes in progress",
- "lcpasswd User does not exist.",
- "lcpasswd Incorrect current passwd",
- "lcpasswd Unable to su to root.",
- "lcpasswd Cannot set new passwd.",
- "lcpasswd Username has invalid characters",
- "lcpasswd Invalid characters in password",
- "11", "12",
- "lcpasswd Password mismatch");
+ "pwchange_failure - lcpasswd must be run as user 'www'",
+ "pwchange_failure - lcpasswd got incorrect number of arguments",
+ "pwchange_failure - lcpasswd did not get the right nubmer of input text lines",
+ "pwchange_failure - lcpasswd too many simultaneous pwd changes in progress",
+ "pwchange_failure - lcpasswd User does not exist.",
+ "pwchange_failure - lcpasswd Incorrect current passwd",
+ "pwchange_failure - lcpasswd Unable to su to root.",
+ "pwchange_failure - lcpasswd Cannot set new passwd.",
+ "pwchange_failure - lcpasswd Username has invalid characters",
+ "pwchange_failure - lcpasswd Invalid characters in password",
+ "pwchange_failure - lcpasswd User already exists",
+ "pwchange_failure - lcpasswd Something went wrong with user addition.",
+ "pwchange_failure - lcpasswd Password mismatch",
+ "pwchange_failure - lcpasswd Error filename is invalid");
# The array below are lcuseradd error strings.:
@@ -120,7 +151,226 @@ my @adderrors = ("ok",
"lcuseradd Password mismatch");
+
+#
+# Statistics that are maintained and dislayed in the status line.
+#
+my $Transactions = 0; # Number of attempted transactions.
+my $Failures = 0; # Number of transcations failed.
+
+# ResetStatistics:
+# Resets the statistics counters:
+#
+sub ResetStatistics {
+ $Transactions = 0;
+ $Failures = 0;
+}
+
+#------------------------------------------------------------------------
+#
+# LocalConnection
+# Completes the formation of a locally authenticated connection.
+# This function will ensure that the 'remote' client is really the
+# local host. If not, the connection is closed, and the function fails.
+# If so, initcmd is parsed for the name of a file containing the
+# IDEA session key. The fie is opened, read, deleted and the session
+# key returned to the caller.
+#
+# Parameters:
+# $Socket - Socket open on client.
+# $initcmd - The full text of the init command.
+#
+# Implicit inputs:
+# $thisserver - Our DNS name.
+#
+# Returns:
+# IDEA session key on success.
+# undef on failure.
+#
+sub LocalConnection {
+ my ($Socket, $initcmd) = @_;
+ Debug("Attempting local connection: $initcmd client: $clientip me: $thisserver");
+ if($clientip ne "127.0.0.1") {
+ &logthis(' LocalConnection rejecting non local: '
+ ."$clientip ne $thisserver ");
+ close $Socket;
+ return undef;
+ } else {
+ chomp($initcmd); # Get rid of \n in filename.
+ my ($init, $type, $name) = split(/:/, $initcmd);
+ Debug(" Init command: $init $type $name ");
+
+ # Require that $init = init, and $type = local: Otherwise
+ # the caller is insane:
+
+ if(($init ne "init") && ($type ne "local")) {
+ &logthis(' LocalConnection: caller is insane! '
+ ."init = $init, and type = $type ");
+ close($Socket);;
+ return undef;
+
+ }
+ # Now get the key filename:
+
+ my $IDEAKey = lonlocal::ReadKeyFile($name);
+ return $IDEAKey;
+ }
+}
+#------------------------------------------------------------------------------
+#
+# SSLConnection
+# Completes the formation of an ssh authenticated connection. The
+# socket is promoted to an ssl socket. If this promotion and the associated
+# certificate exchange are successful, the IDEA key is generated and sent
+# to the remote peer via the SSL tunnel. The IDEA key is also returned to
+# the caller after the SSL tunnel is torn down.
+#
+# Parameters:
+# Name Type Purpose
+# $Socket IO::Socket::INET Plaintext socket.
+#
+# Returns:
+# IDEA key on success.
+# undef on failure.
+#
+sub SSLConnection {
+ my $Socket = shift;
+
+ Debug("SSLConnection: ");
+ my $KeyFile = lonssl::KeyFile();
+ if(!$KeyFile) {
+ my $err = lonssl::LastError();
+ &logthis(" CRITICAL"
+ ."Can't get key file $err ");
+ return undef;
+ }
+ my ($CACertificate,
+ $Certificate) = lonssl::CertificateFile();
+
+
+ # If any of the key, certificate or certificate authority
+ # certificate filenames are not defined, this can't work.
+
+ if((!$Certificate) || (!$CACertificate)) {
+ my $err = lonssl::LastError();
+ &logthis(" CRITICAL"
+ ."Can't get certificates: $err ");
+
+ return undef;
+ }
+ Debug("Key: $KeyFile CA: $CACertificate Cert: $Certificate");
+
+ # Indicate to our peer that we can procede with
+ # a transition to ssl authentication:
+
+ print $Socket "ok:ssl\n";
+
+ Debug("Approving promotion -> ssl");
+ # And do so:
+
+ my $SSLSocket = lonssl::PromoteServerSocket($Socket,
+ $CACertificate,
+ $Certificate,
+ $KeyFile);
+ if(! ($SSLSocket) ) { # SSL socket promotion failed.
+ my $err = lonssl::LastError();
+ &logthis(" CRITICAL "
+ ."SSL Socket promotion failed: $err ");
+ return undef;
+ }
+ Debug("SSL Promotion successful");
+
+ #
+ # The only thing we'll use the socket for is to send the IDEA key
+ # to the peer:
+
+ my $Key = lonlocal::CreateCipherKey();
+ print $SSLSocket "$Key\n";
+
+ lonssl::Close($SSLSocket);
+
+ Debug("Key exchange complete: $Key");
+
+ return $Key;
+}
+#
+# InsecureConnection:
+# If insecure connections are allowd,
+# exchange a challenge with the client to 'validate' the
+# client (not really, but that's the protocol):
+# We produce a challenge string that's sent to the client.
+# The client must then echo the challenge verbatim to us.
+#
+# Parameter:
+# Socket - Socket open on the client.
+# Returns:
+# 1 - success.
+# 0 - failure (e.g.mismatch or insecure not allowed).
+#
+sub InsecureConnection {
+ my $Socket = shift;
+
+ # Don't even start if insecure connections are not allowed.
+
+ if(! $perlvar{londAllowInsecure}) { # Insecure connections not allowed.
+ return 0;
+ }
+
+ # Fabricate a challenge string and send it..
+
+ my $challenge = "$$".time; # pid + time.
+ print $Socket "$challenge\n";
+ &status("Waiting for challenge reply");
+
+ my $answer = <$Socket>;
+ $answer =~s/\W//g;
+ if($challenge eq $answer) {
+ return 1;
+ } else {
+ logthis("WARNING client did not respond to challenge");
+ &status("No challenge reqply");
+ return 0;
+ }
+
+
+}
+#
+# Safely execute a command (as long as it's not a shel command and doesn
+# not require/rely on shell escapes. The function operates by doing a
+# a pipe based fork and capturing stdout and stderr from the pipe.
+#
+# Formal Parameters:
+# $line - A line of text to be executed as a command.
+# Returns:
+# The output from that command. If the output is multiline the caller
+# must know how to split up the output.
+#
#
+sub execute_command {
+ my ($line) = @_;
+ my @words = split(/\s/, $line); # Bust the command up into words.
+ my $output = "";
+
+ my $pid = open(CHILD, "-|");
+
+ if($pid) { # Parent process
+ Debug("In parent process for execute_command");
+ my @data = ; # Read the child's outupt...
+ close CHILD;
+ foreach my $output_line (@data) {
+ Debug("Adding $output_line");
+ $output .= $output_line; # Presumably has a \n on it.
+ }
+
+ } else { # Child process
+ close (STDERR);
+ open (STDERR, ">&STDOUT");# Combine stderr, and stdout...
+ exec(@words); # won't return.
+ }
+ return $output;
+}
+
+
# GetCertificate: Given a transaction that requires a certificate,
# this function will extract the certificate from the transaction
# request. Note that at this point, the only concept of a certificate
@@ -158,7 +408,6 @@ sub isClient {
# - This allows dynamic changes to the manager table
# without the need to signal to the lond.
#
-
sub ReadManagerTable {
# Clean out the old table first..
@@ -175,7 +424,6 @@ sub ReadManagerTable {
while(my $host = ) {
chomp($host);
if ($host =~ "^#") { # Comment line.
- logthis(' Skipping line: '. "$host\n");
next;
}
if (!defined $hostip{$host}) { # This is a non cluster member
@@ -225,42 +473,14 @@ sub ValidManager {
# 1 - Success.
#
sub CopyFile {
- my $oldfile = shift;
- my $newfile = shift;
-
- # The file must exist:
- if(-e $oldfile) {
+ my ($oldfile, $newfile) = @_;
- # Read the old file.
-
- my $oldfh = IO::File->new("< $oldfile");
- if(!$oldfh) {
- return 0;
- }
- my @contents = <$oldfh>; # Suck in the entire file.
-
- # write the backup file:
-
- my $newfh = IO::File->new("> $newfile");
- if(!(defined $newfh)){
- return 0;
- }
- my $lines = scalar @contents;
- for (my $i =0; $i < $lines; $i++) {
- print $newfh ($contents[$i]);
- }
-
- $oldfh->close;
- $newfh->close;
-
- chmod(0660, $newfile);
-
- return 1;
-
- } else {
- return 0;
+ if (! copy($oldfile,$newfile)) {
+ return 0;
}
+ chmod(0660, $newfile);
+ return 1;
}
#
# Host files are passed out with externally visible host IPs.
@@ -326,8 +546,8 @@ sub AdjustHostContents {
# 0 - failure and $! has an errno.
#
sub InstallFile {
- my $Filename = shift;
- my $Contents = shift;
+
+ my ($Filename, $Contents) = @_;
my $TempFile = $Filename.".tmp";
# Open the file for write:
@@ -350,6 +570,8 @@ sub InstallFile {
return 1;
}
+
+
#
# ConfigFileFromSelector: converts a configuration file selector
# (one of host or domain at this point) into a
@@ -439,8 +661,7 @@ sub PushFile {
&logthis(' Pushfile: unable to install '
.$tablefile." $! ");
return "error:$!";
- }
- else {
+ } else {
&logthis(' Installed new '.$tablefile
."");
@@ -564,8 +785,8 @@ sub isValidEditCommand {
# file being edited.
#
sub ApplyEdit {
- my $directive = shift;
- my $editor = shift;
+
+ my ($directive, $editor) = @_;
# Break the directive down into its command and its parameters
# (at most two at this point. The meaning of the parameters, if in fact
@@ -649,8 +870,8 @@ sub AdjustOurHost {
# editor - Editor containing the file.
#
sub ReplaceConfigFile {
- my $filename = shift;
- my $editor = shift;
+
+ my ($filename, $editor) = @_;
CopyFile ($filename, $filename.".old");
@@ -719,6 +940,3736 @@ sub EditFile {
return "ok\n";
}
+
+#---------------------------------------------------------------
+#
+# Manipulation of hash based databases (factoring out common code
+# for later use as we refactor.
+#
+# Ties a domain level resource file to a hash.
+# If requested a history entry is created in the associated hist file.
+#
+# Parameters:
+# domain - Name of the domain in which the resource file lives.
+# namespace - Name of the hash within that domain.
+# how - How to tie the hash (e.g. GDBM_WRCREAT()).
+# loghead - Optional parameter, if present a log entry is created
+# in the associated history file and this is the first part
+# of that entry.
+# logtail - Goes along with loghead, The actual logentry is of the
+# form $loghead::logtail.
+# Returns:
+# Reference to a hash bound to the db file or alternatively undef
+# if the tie failed.
+#
+sub tie_domain_hash {
+ my ($domain,$namespace,$how,$loghead,$logtail) = @_;
+
+ # Filter out any whitespace in the domain name:
+
+ $domain =~ s/\W//g;
+
+ # We have enough to go on to tie the hash:
+
+ my $user_top_dir = $perlvar{'lonUsersDir'};
+ my $domain_dir = $user_top_dir."/$domain";
+ my $resource_file = $domain_dir."/$namespace";
+ return &_locking_hash_tie($resource_file,$namespace,$how,$loghead,$logtail);
+}
+
+sub untie_domain_hash {
+ return &_locking_hash_untie(@_);
+}
+#
+# Ties a user's resource file to a hash.
+# If necessary, an appropriate history
+# log file entry is made as well.
+# This sub factors out common code from the subs that manipulate
+# the various gdbm files that keep keyword value pairs.
+# Parameters:
+# domain - Name of the domain the user is in.
+# user - Name of the 'current user'.
+# namespace - Namespace representing the file to tie.
+# how - What the tie is done to (e.g. GDBM_WRCREAT().
+# loghead - Optional first part of log entry if there may be a
+# history file.
+# what - Optional tail of log entry if there may be a history
+# file.
+# Returns:
+# hash to which the database is tied. It's up to the caller to untie.
+# undef if the has could not be tied.
+#
+sub tie_user_hash {
+ my ($domain,$user,$namespace,$how,$loghead,$what) = @_;
+
+ $namespace=~s/\//\_/g; # / -> _
+ $namespace=~s/\W//g; # whitespace eliminated.
+ my $proname = propath($domain, $user);
+
+ my $file_prefix="$proname/$namespace";
+ return &_locking_hash_tie($file_prefix,$namespace,$how,$loghead,$what);
+}
+
+sub untie_user_hash {
+ return &_locking_hash_untie(@_);
+}
+
+# internal routines that handle the actual tieing and untieing process
+
+sub _do_hash_tie {
+ my ($file_prefix,$namespace,$how,$loghead,$what) = @_;
+ my %hash;
+ if(tie(%hash, 'GDBM_File', "$file_prefix.db", $how, 0640)) {
+ # If this is a namespace for which a history is kept,
+ # make the history log entry:
+ if (($namespace !~/^nohist\_/) && (defined($loghead))) {
+ my $args = scalar @_;
+ Debug(" Opening history: $file_prefix $args");
+ my $hfh = IO::File->new(">>$file_prefix.hist");
+ if($hfh) {
+ my $now = time;
+ print $hfh "$loghead:$now:$what\n";
+ }
+ $hfh->close;
+ }
+ return \%hash;
+ } else {
+ return undef;
+ }
+}
+
+sub _do_hash_untie {
+ my ($hashref) = @_;
+ my $result = untie(%$hashref);
+ return $result;
+}
+
+{
+ my $sym;
+
+ sub _locking_hash_tie {
+ my ($file_prefix,$namespace,$how,$loghead,$what) = @_;
+
+ my ($lock);
+
+ if ($how eq &GDBM_READER()) {
+ $lock=LOCK_SH;
+ $how=$how|&GDBM_NOLOCK();
+ #if the db doesn't exist we can't read from it
+ if (! -e "$file_prefix.db") {
+ $! = 2;
+ return undef;
+ }
+ } elsif ($how eq &GDBM_WRCREAT()) {
+ $lock=LOCK_EX;
+ $how=$how|&GDBM_NOLOCK();
+ if (! -e "$file_prefix.db") {
+ # doesn't exist but we need it to in order to successfully
+ # lock it so bring it into existance
+ open(TOUCH,">>$file_prefix.db");
+ close(TOUCH);
+ }
+ } else {
+ &logthis("Unknown method $how for $file_prefix");
+ die();
+ }
+
+ $sym=&Symbol::gensym();
+ open($sym,"$file_prefix.db");
+ my $failed=0;
+ eval {
+ local $SIG{__DIE__}='DEFAULT';
+ local $SIG{ALRM}=sub {
+ $failed=1;
+ die("failed lock");
+ };
+ alarm($lond_max_wait_time);
+ flock($sym,$lock);
+ alarm(0);
+ };
+ if ($failed) {
+ $! = 100; # throwing error # 100
+ return undef;
+ }
+ return &_do_hash_tie($file_prefix,$namespace,$how,$loghead,$what);
+ }
+
+ sub _locking_hash_untie {
+ my ($hashref) = @_;
+ my $result = untie(%$hashref);
+ flock($sym,LOCK_UN);
+ close($sym);
+ undef($sym);
+ return $result;
+ }
+}
+
+# read_profile
+#
+# Returns a set of specific entries from a user's profile file.
+# this is a utility function that is used by both get_profile_entry and
+# get_profile_entry_encrypted.
+#
+# Parameters:
+# udom - Domain in which the user exists.
+# uname - User's account name (loncapa account)
+# namespace - The profile namespace to open.
+# what - A set of & separated queries.
+# Returns:
+# If all ok: - The string that needs to be shipped back to the user.
+# If failure - A string that starts with error: followed by the failure
+# reason.. note that this probabyl gets shipped back to the
+# user as well.
+#
+sub read_profile {
+ my ($udom, $uname, $namespace, $what) = @_;
+
+ my $hashref = &tie_user_hash($udom, $uname, $namespace,
+ &GDBM_READER());
+ if ($hashref) {
+ my @queries=split(/\&/,$what);
+ my $qresult='';
+
+ for (my $i=0;$i<=$#queries;$i++) {
+ $qresult.="$hashref->{$queries[$i]}&"; # Presumably failure gives empty string.
+ }
+ $qresult=~s/\&$//; # Remove trailing & from last lookup.
+ if (&untie_user_hash($hashref)) {
+ return $qresult;
+ } else {
+ return "error: ".($!+0)." untie (GDBM) Failed";
+ }
+ } else {
+ if ($!+0 == 2) {
+ return "error:No such file or GDBM reported bad block error";
+ } else {
+ return "error: ".($!+0)." tie (GDBM) Failed";
+ }
+ }
+
+}
+#--------------------- Request Handlers --------------------------------------------
+#
+# By convention each request handler registers itself prior to the sub
+# declaration:
+#
+
+#++
+#
+# Handles ping requests.
+# Parameters:
+# $cmd - the actual keyword that invoked us.
+# $tail - the tail of the request that invoked us.
+# $replyfd- File descriptor connected to the client
+# Implicit Inputs:
+# $currenthostid - Global variable that carries the name of the host we are
+# known as.
+# Returns:
+# 1 - Ok to continue processing.
+# 0 - Program should exit.
+# Side effects:
+# Reply information is sent to the client.
+sub ping_handler {
+ my ($cmd, $tail, $client) = @_;
+ Debug("$cmd $tail $client .. $currenthostid:");
+
+ Reply( $client,"$currenthostid\n","$cmd:$tail");
+
+ return 1;
+}
+®ister_handler("ping", \&ping_handler, 0, 1, 1); # Ping unencoded, client or manager.
+
+#++
+#
+# Handles pong requests. Pong replies with our current host id, and
+# the results of a ping sent to us via our lonc.
+#
+# Parameters:
+# $cmd - the actual keyword that invoked us.
+# $tail - the tail of the request that invoked us.
+# $replyfd- File descriptor connected to the client
+# Implicit Inputs:
+# $currenthostid - Global variable that carries the name of the host we are
+# connected to.
+# Returns:
+# 1 - Ok to continue processing.
+# 0 - Program should exit.
+# Side effects:
+# Reply information is sent to the client.
+sub pong_handler {
+ my ($cmd, $tail, $replyfd) = @_;
+
+ my $reply=&reply("ping",$clientname);
+ &Reply( $replyfd, "$currenthostid:$reply\n", "$cmd:$tail");
+ return 1;
+}
+®ister_handler("pong", \&pong_handler, 0, 1, 1); # Pong unencoded, client or manager
+
+#++
+# Called to establish an encrypted session key with the remote client.
+# Note that with secure lond, in most cases this function is never
+# invoked. Instead, the secure session key is established either
+# via a local file that's locked down tight and only lives for a short
+# time, or via an ssl tunnel...and is generated from a bunch-o-random
+# bits from /dev/urandom, rather than the predictable pattern used by
+# by this sub. This sub is only used in the old-style insecure
+# key negotiation.
+# Parameters:
+# $cmd - the actual keyword that invoked us.
+# $tail - the tail of the request that invoked us.
+# $replyfd- File descriptor connected to the client
+# Implicit Inputs:
+# $currenthostid - Global variable that carries the name of the host
+# known as.
+# $clientname - Global variable that carries the name of the hsot we're connected to.
+# Returns:
+# 1 - Ok to continue processing.
+# 0 - Program should exit.
+# Implicit Outputs:
+# Reply information is sent to the client.
+# $cipher is set with a reference to a new IDEA encryption object.
+#
+sub establish_key_handler {
+ my ($cmd, $tail, $replyfd) = @_;
+
+ my $buildkey=time.$$.int(rand 100000);
+ $buildkey=~tr/1-6/A-F/;
+ $buildkey=int(rand 100000).$buildkey.int(rand 100000);
+ my $key=$currenthostid.$clientname;
+ $key=~tr/a-z/A-Z/;
+ $key=~tr/G-P/0-9/;
+ $key=~tr/Q-Z/0-9/;
+ $key=$key.$buildkey.$key.$buildkey.$key.$buildkey;
+ $key=substr($key,0,32);
+ my $cipherkey=pack("H32",$key);
+ $cipher=new IDEA $cipherkey;
+ &Reply($replyfd, "$buildkey\n", "$cmd:$tail");
+
+ return 1;
+
+}
+®ister_handler("ekey", \&establish_key_handler, 0, 1,1);
+
+# Handler for the load command. Returns the current system load average
+# to the requestor.
+#
+# Parameters:
+# $cmd - the actual keyword that invoked us.
+# $tail - the tail of the request that invoked us.
+# $replyfd- File descriptor connected to the client
+# Implicit Inputs:
+# $currenthostid - Global variable that carries the name of the host
+# known as.
+# $clientname - Global variable that carries the name of the hsot we're connected to.
+# Returns:
+# 1 - Ok to continue processing.
+# 0 - Program should exit.
+# Side effects:
+# Reply information is sent to the client.
+sub load_handler {
+ my ($cmd, $tail, $replyfd) = @_;
+
+ # Get the load average from /proc/loadavg and calculate it as a percentage of
+ # the allowed load limit as set by the perl global variable lonLoadLim
+
+ my $loadavg;
+ my $loadfile=IO::File->new('/proc/loadavg');
+
+ $loadavg=<$loadfile>;
+ $loadavg =~ s/\s.*//g; # Extract the first field only.
+
+ my $loadpercent=100*$loadavg/$perlvar{'lonLoadLim'};
+
+ &Reply( $replyfd, "$loadpercent\n", "$cmd:$tail");
+
+ return 1;
+}
+®ister_handler("load", \&load_handler, 0, 1, 0);
+
+#
+# Process the userload request. This sub returns to the client the current
+# user load average. It can be invoked either by clients or managers.
+#
+# Parameters:
+# $cmd - the actual keyword that invoked us.
+# $tail - the tail of the request that invoked us.
+# $replyfd- File descriptor connected to the client
+# Implicit Inputs:
+# $currenthostid - Global variable that carries the name of the host
+# known as.
+# $clientname - Global variable that carries the name of the hsot we're connected to.
+# Returns:
+# 1 - Ok to continue processing.
+# 0 - Program should exit
+# Implicit inputs:
+# whatever the userload() function requires.
+# Implicit outputs:
+# the reply is written to the client.
+#
+sub user_load_handler {
+ my ($cmd, $tail, $replyfd) = @_;
+
+ my $userloadpercent=&userload();
+ &Reply($replyfd, "$userloadpercent\n", "$cmd:$tail");
+
+ return 1;
+}
+®ister_handler("userload", \&user_load_handler, 0, 1, 0);
+
+# Process a request for the authorization type of a user:
+# (userauth).
+#
+# Parameters:
+# $cmd - the actual keyword that invoked us.
+# $tail - the tail of the request that invoked us.
+# $replyfd- File descriptor connected to the client
+# Returns:
+# 1 - Ok to continue processing.
+# 0 - Program should exit
+# Implicit outputs:
+# The user authorization type is written to the client.
+#
+sub user_authorization_type {
+ my ($cmd, $tail, $replyfd) = @_;
+
+ my $userinput = "$cmd:$tail";
+
+ # Pull the domain and username out of the command tail.
+ # and call get_auth_type to determine the authentication type.
+
+ my ($udom,$uname)=split(/:/,$tail);
+ my $result = &get_auth_type($udom, $uname);
+ if($result eq "nouser") {
+ &Failure( $replyfd, "unknown_user\n", $userinput);
+ } else {
+ #
+ # We only want to pass the second field from get_auth_type
+ # for ^krb.. otherwise we'll be handing out the encrypted
+ # password for internals e.g.
+ #
+ my ($type,$otherinfo) = split(/:/,$result);
+ if($type =~ /^krb/) {
+ $type = $result;
+ } else {
+ $type .= ':';
+ }
+ &Reply( $replyfd, "$type\n", $userinput);
+ }
+
+ return 1;
+}
+®ister_handler("currentauth", \&user_authorization_type, 1, 1, 0);
+
+# Process a request by a manager to push a hosts or domain table
+# to us. We pick apart the command and pass it on to the subs
+# that already exist to do this.
+#
+# Parameters:
+# $cmd - the actual keyword that invoked us.
+# $tail - the tail of the request that invoked us.
+# $client - File descriptor connected to the client
+# Returns:
+# 1 - Ok to continue processing.
+# 0 - Program should exit
+# Implicit Output:
+# a reply is written to the client.
+sub push_file_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+
+ # At this time we only know that the IP of our partner is a valid manager
+ # the code below is a hook to do further authentication (e.g. to resolve
+ # spoofing).
+
+ my $cert = &GetCertificate($userinput);
+ if(&ValidManager($cert)) {
+
+ # Now presumably we have the bona fides of both the peer host and the
+ # process making the request.
+
+ my $reply = &PushFile($userinput);
+ &Reply($client, "$reply\n", $userinput);
+
+ } else {
+ &Failure( $client, "refused\n", $userinput);
+ }
+ return 1;
+}
+®ister_handler("pushfile", \&push_file_handler, 1, 0, 1);
+
+#
+# du - list the disk usuage of a directory recursively.
+#
+# note: stolen code from the ls file handler
+# under construction by Rick Banghart
+# .
+# Parameters:
+# $cmd - The command that dispatched us (du).
+# $ududir - The directory path to list... I'm not sure what this
+# is relative as things like ls:. return e.g.
+# no_such_dir.
+# $client - Socket open on the client.
+# Returns:
+# 1 - indicating that the daemon should not disconnect.
+# Side Effects:
+# The reply is written to $client.
+#
+sub du_handler {
+ my ($cmd, $ududir, $client) = @_;
+ my ($ududir) = split(/:/,$ududir); # Make 'telnet' testing easier.
+ my $userinput = "$cmd:$ududir";
+
+ if ($ududir=~/\.\./ || $ududir!~m|^/home/httpd/|) {
+ &Failure($client,"refused\n","$cmd:$ududir");
+ return 1;
+ }
+ # Since $ududir could have some nasties in it,
+ # we will require that ududir is a valid
+ # directory. Just in case someone tries to
+ # slip us a line like .;(cd /home/httpd rm -rf*)
+ # etc.
+ #
+ if (-d $ududir) {
+ my $total_size=0;
+ my $code=sub {
+ if ($_=~/\.\d+\./) { return;}
+ if ($_=~/\.meta$/) { return;}
+ $total_size+=(stat($_))[7];
+ };
+ chdir($ududir);
+ find($code,$ududir);
+ $total_size=int($total_size/1024);
+ &Reply($client,"$total_size\n","$cmd:$ududir");
+ } else {
+ &Failure($client, "bad_directory:$ududir\n","$cmd:$ududir");
+ }
+ return 1;
+}
+®ister_handler("du", \&du_handler, 0, 1, 0);
+
+#
+# The ls_handler routine should be considered obosolete and is retained
+# for communication with legacy servers. Please see the ls2_handler.
+#
+# ls - list the contents of a directory. For each file in the
+# selected directory the filename followed by the full output of
+# the stat function is returned. The returned info for each
+# file are separated by ':'. The stat fields are separated by &'s.
+# Parameters:
+# $cmd - The command that dispatched us (ls).
+# $ulsdir - The directory path to list... I'm not sure what this
+# is relative as things like ls:. return e.g.
+# no_such_dir.
+# $client - Socket open on the client.
+# Returns:
+# 1 - indicating that the daemon should not disconnect.
+# Side Effects:
+# The reply is written to $client.
+#
+sub ls_handler {
+ # obsoleted by ls2_handler
+ my ($cmd, $ulsdir, $client) = @_;
+
+ my $userinput = "$cmd:$ulsdir";
+
+ my $obs;
+ my $rights;
+ my $ulsout='';
+ my $ulsfn;
+ if (-e $ulsdir) {
+ if(-d $ulsdir) {
+ if (opendir(LSDIR,$ulsdir)) {
+ while ($ulsfn=readdir(LSDIR)) {
+ undef($obs);
+ undef($rights);
+ my @ulsstats=stat($ulsdir.'/'.$ulsfn);
+ #We do some obsolete checking here
+ if(-e $ulsdir.'/'.$ulsfn.".meta") {
+ open(FILE, $ulsdir.'/'.$ulsfn.".meta");
+ my @obsolete=;
+ foreach my $obsolete (@obsolete) {
+ if($obsolete =~ m/()(on|1)/) { $obs = 1; }
+ if($obsolete =~ m|()(default)|) { $rights = 1; }
+ }
+ }
+ $ulsout.=$ulsfn.'&'.join('&',@ulsstats);
+ if($obs eq '1') { $ulsout.="&1"; }
+ else { $ulsout.="&0"; }
+ if($rights eq '1') { $ulsout.="&1:"; }
+ else { $ulsout.="&0:"; }
+ }
+ closedir(LSDIR);
+ }
+ } else {
+ my @ulsstats=stat($ulsdir);
+ $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
+ }
+ } else {
+ $ulsout='no_such_dir';
+ }
+ if ($ulsout eq '') { $ulsout='empty'; }
+ &Reply($client, "$ulsout\n", $userinput); # This supports debug logging.
+
+ return 1;
+
+}
+®ister_handler("ls", \&ls_handler, 0, 1, 0);
+
+#
+# Please also see the ls_handler, which this routine obosolets.
+# ls2_handler differs from ls_handler in that it escapes its return
+# values before concatenating them together with ':'s.
+#
+# ls2 - list the contents of a directory. For each file in the
+# selected directory the filename followed by the full output of
+# the stat function is returned. The returned info for each
+# file are separated by ':'. The stat fields are separated by &'s.
+# Parameters:
+# $cmd - The command that dispatched us (ls).
+# $ulsdir - The directory path to list... I'm not sure what this
+# is relative as things like ls:. return e.g.
+# no_such_dir.
+# $client - Socket open on the client.
+# Returns:
+# 1 - indicating that the daemon should not disconnect.
+# Side Effects:
+# The reply is written to $client.
+#
+sub ls2_handler {
+ my ($cmd, $ulsdir, $client) = @_;
+
+ my $userinput = "$cmd:$ulsdir";
+
+ my $obs;
+ my $rights;
+ my $ulsout='';
+ my $ulsfn;
+ if (-e $ulsdir) {
+ if(-d $ulsdir) {
+ if (opendir(LSDIR,$ulsdir)) {
+ while ($ulsfn=readdir(LSDIR)) {
+ undef($obs);
+ undef($rights);
+ my @ulsstats=stat($ulsdir.'/'.$ulsfn);
+ #We do some obsolete checking here
+ if(-e $ulsdir.'/'.$ulsfn.".meta") {
+ open(FILE, $ulsdir.'/'.$ulsfn.".meta");
+ my @obsolete=;
+ foreach my $obsolete (@obsolete) {
+ if($obsolete =~ m/()(on|1)/) { $obs = 1; }
+ if($obsolete =~ m|()(default)|) {
+ $rights = 1;
+ }
+ }
+ }
+ my $tmp = $ulsfn.'&'.join('&',@ulsstats);
+ if ($obs eq '1') { $tmp.="&1"; } else { $tmp.="&0"; }
+ if ($rights eq '1') { $tmp.="&1"; } else { $tmp.="&0"; }
+ $ulsout.= &escape($tmp).':';
+ }
+ closedir(LSDIR);
+ }
+ } else {
+ my @ulsstats=stat($ulsdir);
+ $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
+ }
+ } else {
+ $ulsout='no_such_dir';
+ }
+ if ($ulsout eq '') { $ulsout='empty'; }
+ &Reply($client, "$ulsout\n", $userinput); # This supports debug logging.
+ return 1;
+}
+®ister_handler("ls2", \&ls2_handler, 0, 1, 0);
+
+# Process a reinit request. Reinit requests that either
+# lonc or lond be reinitialized so that an updated
+# host.tab or domain.tab can be processed.
+#
+# Parameters:
+# $cmd - the actual keyword that invoked us.
+# $tail - the tail of the request that invoked us.
+# $client - File descriptor connected to the client
+# Returns:
+# 1 - Ok to continue processing.
+# 0 - Program should exit
+# Implicit output:
+# a reply is sent to the client.
+#
+sub reinit_process_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+
+ my $cert = &GetCertificate($userinput);
+ if(&ValidManager($cert)) {
+ chomp($userinput);
+ my $reply = &ReinitProcess($userinput);
+ &Reply( $client, "$reply\n", $userinput);
+ } else {
+ &Failure( $client, "refused\n", $userinput);
+ }
+ return 1;
+}
+®ister_handler("reinit", \&reinit_process_handler, 1, 0, 1);
+
+# Process the editing script for a table edit operation.
+# the editing operation must be encrypted and requested by
+# a manager host.
+#
+# Parameters:
+# $cmd - the actual keyword that invoked us.
+# $tail - the tail of the request that invoked us.
+# $client - File descriptor connected to the client
+# Returns:
+# 1 - Ok to continue processing.
+# 0 - Program should exit
+# Implicit output:
+# a reply is sent to the client.
+#
+sub edit_table_handler {
+ my ($command, $tail, $client) = @_;
+
+ my $userinput = "$command:$tail";
+
+ my $cert = &GetCertificate($userinput);
+ if(&ValidManager($cert)) {
+ my($filetype, $script) = split(/:/, $tail);
+ if (($filetype eq "hosts") ||
+ ($filetype eq "domain")) {
+ if($script ne "") {
+ &Reply($client, # BUGBUG - EditFile
+ &EditFile($userinput), # could fail.
+ $userinput);
+ } else {
+ &Failure($client,"refused\n",$userinput);
+ }
+ } else {
+ &Failure($client,"refused\n",$userinput);
+ }
+ } else {
+ &Failure($client,"refused\n",$userinput);
+ }
+ return 1;
+}
+®ister_handler("edit", \&edit_table_handler, 1, 0, 1);
+
+#
+# Authenticate a user against the LonCAPA authentication
+# database. Note that there are several authentication
+# possibilities:
+# - unix - The user can be authenticated against the unix
+# password file.
+# - internal - The user can be authenticated against a purely
+# internal per user password file.
+# - kerberos - The user can be authenticated against either a kerb4 or kerb5
+# ticket granting authority.
+# - user - The person tailoring LonCAPA can supply a user authentication
+# mechanism that is per system.
+#
+# Parameters:
+# $cmd - The command that got us here.
+# $tail - Tail of the command (remaining parameters).
+# $client - File descriptor connected to client.
+# Returns
+# 0 - Requested to exit, caller should shut down.
+# 1 - Continue processing.
+# Implicit inputs:
+# The authentication systems describe above have their own forms of implicit
+# input into the authentication process that are described above.
+#
+sub authenticate_handler {
+ my ($cmd, $tail, $client) = @_;
+
+
+ # Regenerate the full input line
+
+ my $userinput = $cmd.":".$tail;
+
+ # udom - User's domain.
+ # uname - Username.
+ # upass - User's password.
+
+ my ($udom,$uname,$upass)=split(/:/,$tail);
+ &Debug(" Authenticate domain = $udom, user = $uname, password = $upass");
+ chomp($upass);
+ $upass=&unescape($upass);
+
+ my $pwdcorrect = &validate_user($udom, $uname, $upass);
+ if($pwdcorrect) {
+ &Reply( $client, "authorized\n", $userinput);
+ #
+ # Bad credentials: Failed to authorize
+ #
+ } else {
+ &Failure( $client, "non_authorized\n", $userinput);
+ }
+
+ return 1;
+}
+®ister_handler("auth", \&authenticate_handler, 1, 1, 0);
+
+#
+# Change a user's password. Note that this function is complicated by
+# the fact that a user may be authenticated in more than one way:
+# At present, we are not able to change the password for all types of
+# authentication methods. Only for:
+# unix - unix password or shadow passoword style authentication.
+# local - Locally written authentication mechanism.
+# For now, kerb4 and kerb5 password changes are not supported and result
+# in an error.
+# FUTURE WORK:
+# Support kerberos passwd changes?
+# Parameters:
+# $cmd - The command that got us here.
+# $tail - Tail of the command (remaining parameters).
+# $client - File descriptor connected to client.
+# Returns
+# 0 - Requested to exit, caller should shut down.
+# 1 - Continue processing.
+# Implicit inputs:
+# The authentication systems describe above have their own forms of implicit
+# input into the authentication process that are described above.
+sub change_password_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = $cmd.":".$tail; # Reconstruct client's string.
+
+ #
+ # udom - user's domain.
+ # uname - Username.
+ # upass - Current password.
+ # npass - New password.
+
+ my ($udom,$uname,$upass,$npass)=split(/:/,$tail);
+
+ $upass=&unescape($upass);
+ $npass=&unescape($npass);
+ &Debug("Trying to change password for $uname");
+
+ # First require that the user can be authenticated with their
+ # old password:
+
+ my $validated = &validate_user($udom, $uname, $upass);
+ if($validated) {
+ my $realpasswd = &get_auth_type($udom, $uname); # Defined since authd.
+
+ my ($howpwd,$contentpwd)=split(/:/,$realpasswd);
+ if ($howpwd eq 'internal') {
+ &Debug("internal auth");
+ my $salt=time;
+ $salt=substr($salt,6,2);
+ my $ncpass=crypt($npass,$salt);
+ if(&rewrite_password_file($udom, $uname, "internal:$ncpass")) {
+ &logthis("Result of password change for "
+ ."$uname: pwchange_success");
+ &Reply($client, "ok\n", $userinput);
+ } else {
+ &logthis("Unable to open $uname passwd "
+ ."to change password");
+ &Failure( $client, "non_authorized\n",$userinput);
+ }
+ } elsif ($howpwd eq 'unix') {
+ my $result = &change_unix_password($uname, $npass);
+ &logthis("Result of password change for $uname: ".
+ $result);
+ &Reply($client, "$result\n", $userinput);
+ } else {
+ # this just means that the current password mode is not
+ # one we know how to change (e.g the kerberos auth modes or
+ # locally written auth handler).
+ #
+ &Failure( $client, "auth_mode_error\n", $userinput);
+ }
+
+ } else {
+ &Failure( $client, "non_authorized\n", $userinput);
+ }
+
+ return 1;
+}
+®ister_handler("passwd", \&change_password_handler, 1, 1, 0);
+
+#
+# Create a new user. User in this case means a lon-capa user.
+# The user must either already exist in some authentication realm
+# like kerberos or the /etc/passwd. If not, a user completely local to
+# this loncapa system is created.
+#
+# Parameters:
+# $cmd - The command that got us here.
+# $tail - Tail of the command (remaining parameters).
+# $client - File descriptor connected to client.
+# Returns
+# 0 - Requested to exit, caller should shut down.
+# 1 - Continue processing.
+# Implicit inputs:
+# The authentication systems describe above have their own forms of implicit
+# input into the authentication process that are described above.
+sub add_user_handler {
+
+ my ($cmd, $tail, $client) = @_;
+
+
+ my ($udom,$uname,$umode,$npass)=split(/:/,$tail);
+ my $userinput = $cmd.":".$tail; # Reconstruct the full request line.
+
+ &Debug("cmd =".$cmd." $udom =".$udom." uname=".$uname);
+
+
+ if($udom eq $currentdomainid) { # Reject new users for other domains...
+
+ my $oldumask=umask(0077);
+ chomp($npass);
+ $npass=&unescape($npass);
+ my $passfilename = &password_path($udom, $uname);
+ &Debug("Password file created will be:".$passfilename);
+ if (-e $passfilename) {
+ &Failure( $client, "already_exists\n", $userinput);
+ } else {
+ my $fperror='';
+ if (!&mkpath($passfilename)) {
+ $fperror="error: ".($!+0)." mkdir failed while attempting "
+ ."makeuser";
+ }
+ unless ($fperror) {
+ my $result=&make_passwd_file($uname, $umode,$npass, $passfilename);
+ &Reply($client, $result, $userinput); #BUGBUG - could be fail
+ } else {
+ &Failure($client, "$fperror\n", $userinput);
+ }
+ }
+ umask($oldumask);
+ } else {
+ &Failure($client, "not_right_domain\n",
+ $userinput); # Even if we are multihomed.
+
+ }
+ return 1;
+
+}
+®ister_handler("makeuser", \&add_user_handler, 1, 1, 0);
+
+#
+# Change the authentication method of a user. Note that this may
+# also implicitly change the user's password if, for example, the user is
+# joining an existing authentication realm. Known authentication realms at
+# this time are:
+# internal - Purely internal password file (only loncapa knows this user)
+# local - Institutionally written authentication module.
+# unix - Unix user (/etc/passwd with or without /etc/shadow).
+# kerb4 - kerberos version 4
+# kerb5 - kerberos version 5
+#
+# Parameters:
+# $cmd - The command that got us here.
+# $tail - Tail of the command (remaining parameters).
+# $client - File descriptor connected to client.
+# Returns
+# 0 - Requested to exit, caller should shut down.
+# 1 - Continue processing.
+# Implicit inputs:
+# The authentication systems describe above have their own forms of implicit
+# input into the authentication process that are described above.
+# NOTE:
+# This is also used to change the authentication credential values (e.g. passwd).
+#
+#
+sub change_authentication_handler {
+
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail"; # Reconstruct user input.
+
+ my ($udom,$uname,$umode,$npass)=split(/:/,$tail);
+ &Debug("cmd = ".$cmd." domain= ".$udom."uname =".$uname." umode= ".$umode);
+ if ($udom ne $currentdomainid) {
+ &Failure( $client, "not_right_domain\n", $client);
+ } else {
+
+ chomp($npass);
+
+ $npass=&unescape($npass);
+ my $oldauth = &get_auth_type($udom, $uname); # Get old auth info.
+ my $passfilename = &password_path($udom, $uname);
+ if ($passfilename) { # Not allowed to create a new user!!
+ # If just changing the unix passwd. need to arrange to run
+ # passwd since otherwise make_passwd_file will run
+ # lcuseradd which fails if an account already exists
+ # (to prevent an unscrupulous LONCAPA admin from stealing
+ # an existing account by overwriting it as a LonCAPA account).
+
+ if(($oldauth =~/^unix/) && ($umode eq "unix")) {
+ my $result = &change_unix_password($uname, $npass);
+ &logthis("Result of password change for $uname: ".$result);
+ if ($result eq "ok") {
+ &Reply($client, "$result\n")
+ } else {
+ &Failure($client, "$result\n");
+ }
+ } else {
+ my $result=&make_passwd_file($uname, $umode,$npass,$passfilename);
+ #
+ # If the current auth mode is internal, and the old auth mode was
+ # unix, or krb*, and the user is an author for this domain,
+ # re-run manage_permissions for that role in order to be able
+ # to take ownership of the construction space back to www:www
+ #
+
+
+ if( (($oldauth =~ /^unix/) && ($umode eq "internal")) ||
+ (($oldauth =~ /^internal/) && ($umode eq "unix")) ) {
+ if(&is_author($udom, $uname)) {
+ &Debug(" Need to manage author permissions...");
+ &manage_permissions("/$udom/_au", $udom, $uname, "$umode:");
+ }
+ }
+ &Reply($client, $result, $userinput);
+ }
+
+
+ } else {
+ &Failure($client, "non_authorized\n", $userinput); # Fail the user now.
+ }
+ }
+ return 1;
+}
+®ister_handler("changeuserauth", \&change_authentication_handler, 1,1, 0);
+
+#
+# Determines if this is the home server for a user. The home server
+# for a user will have his/her lon-capa passwd file. Therefore all we need
+# to do is determine if this file exists.
+#
+# Parameters:
+# $cmd - The command that got us here.
+# $tail - Tail of the command (remaining parameters).
+# $client - File descriptor connected to client.
+# Returns
+# 0 - Requested to exit, caller should shut down.
+# 1 - Continue processing.
+# Implicit inputs:
+# The authentication systems describe above have their own forms of implicit
+# input into the authentication process that are described above.
+#
+sub is_home_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+
+ my ($udom,$uname)=split(/:/,$tail);
+ chomp($uname);
+ my $passfile = &password_filename($udom, $uname);
+ if($passfile) {
+ &Reply( $client, "found\n", $userinput);
+ } else {
+ &Failure($client, "not_found\n", $userinput);
+ }
+ return 1;
+}
+®ister_handler("home", \&is_home_handler, 0,1,0);
+
+#
+# Process an update request for a resource?? I think what's going on here is
+# that a resource has been modified that we hold a subscription to.
+# If the resource is not local, then we must update, or at least invalidate our
+# cached copy of the resource.
+# FUTURE WORK:
+# I need to look at this logic carefully. My druthers would be to follow
+# typical caching logic, and simple invalidate the cache, drop any subscription
+# an let the next fetch start the ball rolling again... however that may
+# actually be more difficult than it looks given the complex web of
+# proxy servers.
+# Parameters:
+# $cmd - The command that got us here.
+# $tail - Tail of the command (remaining parameters).
+# $client - File descriptor connected to client.
+# Returns
+# 0 - Requested to exit, caller should shut down.
+# 1 - Continue processing.
+# Implicit inputs:
+# The authentication systems describe above have their own forms of implicit
+# input into the authentication process that are described above.
+#
+sub update_resource_handler {
+
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+
+ my $fname= $tail; # This allows interactive testing
+
+
+ my $ownership=ishome($fname);
+ if ($ownership eq 'not_owner') {
+ if (-e $fname) {
+ my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size,
+ $atime,$mtime,$ctime,$blksize,$blocks)=stat($fname);
+ my $now=time;
+ my $since=$now-$atime;
+ if ($since>$perlvar{'lonExpire'}) {
+ my $reply=&reply("unsub:$fname","$clientname");
+ &devalidate_meta_cache($fname);
+ unlink("$fname");
+ } else {
+ my $transname="$fname.in.transfer";
+ my $remoteurl=&reply("sub:$fname","$clientname");
+ my $response;
+ alarm(120);
+ {
+ my $ua=new LWP::UserAgent;
+ my $request=new HTTP::Request('GET',"$remoteurl");
+ $response=$ua->request($request,$transname);
+ }
+ alarm(0);
+ if ($response->is_error()) {
+ unlink($transname);
+ my $message=$response->status_line;
+ &logthis("LWP GET: $message for $fname ($remoteurl)");
+ } else {
+ if ($remoteurl!~/\.meta$/) {
+ alarm(120);
+ {
+ my $ua=new LWP::UserAgent;
+ my $mrequest=new HTTP::Request('GET',$remoteurl.'.meta');
+ my $mresponse=$ua->request($mrequest,$fname.'.meta');
+ if ($mresponse->is_error()) {
+ unlink($fname.'.meta');
+ }
+ }
+ alarm(0);
+ }
+ rename($transname,$fname);
+ &devalidate_meta_cache($fname);
+ }
+ }
+ &Reply( $client, "ok\n", $userinput);
+ } else {
+ &Failure($client, "not_found\n", $userinput);
+ }
+ } else {
+ &Failure($client, "rejected\n", $userinput);
+ }
+ return 1;
+}
+®ister_handler("update", \&update_resource_handler, 0 ,1, 0);
+
+sub devalidate_meta_cache {
+ my ($url) = @_;
+ use Cache::Memcached;
+ my $memcache = new Cache::Memcached({'servers'=>['127.0.0.1:11211']});
+ $url = &declutter($url);
+ $url =~ s-\.meta$--;
+ my $id = &escape('meta:'.$url);
+ $memcache->delete($id);
+}
+
+sub declutter {
+ my $thisfn=shift;
+ $thisfn=~s/^\Q$perlvar{'lonDocRoot'}\E//;
+ $thisfn=~s/^\///;
+ $thisfn=~s|^adm/wrapper/||;
+ $thisfn=~s|^adm/coursedocs/showdoc/||;
+ $thisfn=~s/^res\///;
+ $thisfn=~s/\?.+$//;
+ return $thisfn;
+}
+#
+# Fetch a user file from a remote server to the user's home directory
+# userfiles subdir.
+# Parameters:
+# $cmd - The command that got us here.
+# $tail - Tail of the command (remaining parameters).
+# $client - File descriptor connected to client.
+# Returns
+# 0 - Requested to exit, caller should shut down.
+# 1 - Continue processing.
+#
+sub fetch_user_file_handler {
+
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+ my $fname = $tail;
+ my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|);
+ my $udir=&propath($udom,$uname).'/userfiles';
+ unless (-e $udir) {
+ mkdir($udir,0770);
+ }
+ Debug("fetch user file for $fname");
+ if (-e $udir) {
+ $ufile=~s/^[\.\~]+//;
+
+ # IF necessary, create the path right down to the file.
+ # Note that any regular files in the way of this path are
+ # wiped out to deal with some earlier folly of mine.
+
+ if (!&mkpath($udir.'/'.$ufile)) {
+ &Failure($client, "unable_to_create\n", $userinput);
+ }
+
+ my $destname=$udir.'/'.$ufile;
+ my $transname=$udir.'/'.$ufile.'.in.transit';
+ my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;
+ my $response;
+ Debug("Remote URL : $remoteurl Transfername $transname Destname: $destname");
+ alarm(120);
+ {
+ my $ua=new LWP::UserAgent;
+ my $request=new HTTP::Request('GET',"$remoteurl");
+ $response=$ua->request($request,$transname);
+ }
+ alarm(0);
+ if ($response->is_error()) {
+ unlink($transname);
+ my $message=$response->status_line;
+ &logthis("LWP GET: $message for $fname ($remoteurl)");
+ &Failure($client, "failed\n", $userinput);
+ } else {
+ Debug("Renaming $transname to $destname");
+ if (!rename($transname,$destname)) {
+ &logthis("Unable to move $transname to $destname");
+ unlink($transname);
+ &Failure($client, "failed\n", $userinput);
+ } else {
+ &Reply($client, "ok\n", $userinput);
+ }
+ }
+ } else {
+ &Failure($client, "not_home\n", $userinput);
+ }
+ return 1;
+}
+®ister_handler("fetchuserfile", \&fetch_user_file_handler, 0, 1, 0);
+
+#
+# Remove a file from a user's home directory userfiles subdirectory.
+# Parameters:
+# cmd - the Lond request keyword that got us here.
+# tail - the part of the command past the keyword.
+# client- File descriptor connected with the client.
+#
+# Returns:
+# 1 - Continue processing.
+sub remove_user_file_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my ($fname) = split(/:/, $tail); # Get rid of any tailing :'s lonc may have sent.
+
+ my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|);
+ if ($ufile =~m|/\.\./|) {
+ # any files paths with /../ in them refuse
+ # to deal with
+ &Failure($client, "refused\n", "$cmd:$tail");
+ } else {
+ my $udir = &propath($udom,$uname);
+ if (-e $udir) {
+ my $file=$udir.'/userfiles/'.$ufile;
+ if (-e $file) {
+ #
+ # If the file is a regular file unlink is fine...
+ # However it's possible the client wants a dir.
+ # removed, in which case rmdir is more approprate:
+ #
+ if (-f $file){
+ unlink($file);
+ } elsif(-d $file) {
+ rmdir($file);
+ }
+ if (-e $file) {
+ # File is still there after we deleted it ?!?
+
+ &Failure($client, "failed\n", "$cmd:$tail");
+ } else {
+ &Reply($client, "ok\n", "$cmd:$tail");
+ }
+ } else {
+ &Failure($client, "not_found\n", "$cmd:$tail");
+ }
+ } else {
+ &Failure($client, "not_home\n", "$cmd:$tail");
+ }
+ }
+ return 1;
+}
+®ister_handler("removeuserfile", \&remove_user_file_handler, 0,1,0);
+
+#
+# make a directory in a user's home directory userfiles subdirectory.
+# Parameters:
+# cmd - the Lond request keyword that got us here.
+# tail - the part of the command past the keyword.
+# client- File descriptor connected with the client.
+#
+# Returns:
+# 1 - Continue processing.
+sub mkdir_user_file_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my ($dir) = split(/:/, $tail); # Get rid of any tailing :'s lonc may have sent.
+ $dir=&unescape($dir);
+ my ($udom,$uname,$ufile) = ($dir =~ m|^([^/]+)/([^/]+)/(.+)$|);
+ if ($ufile =~m|/\.\./|) {
+ # any files paths with /../ in them refuse
+ # to deal with
+ &Failure($client, "refused\n", "$cmd:$tail");
+ } else {
+ my $udir = &propath($udom,$uname);
+ if (-e $udir) {
+ my $newdir=$udir.'/userfiles/'.$ufile.'/';
+ if (!&mkpath($newdir)) {
+ &Failure($client, "failed\n", "$cmd:$tail");
+ }
+ &Reply($client, "ok\n", "$cmd:$tail");
+ } else {
+ &Failure($client, "not_home\n", "$cmd:$tail");
+ }
+ }
+ return 1;
+}
+®ister_handler("mkdiruserfile", \&mkdir_user_file_handler, 0,1,0);
+
+#
+# rename a file in a user's home directory userfiles subdirectory.
+# Parameters:
+# cmd - the Lond request keyword that got us here.
+# tail - the part of the command past the keyword.
+# client- File descriptor connected with the client.
+#
+# Returns:
+# 1 - Continue processing.
+sub rename_user_file_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my ($udom,$uname,$old,$new) = split(/:/, $tail);
+ $old=&unescape($old);
+ $new=&unescape($new);
+ if ($new =~m|/\.\./| || $old =~m|/\.\./|) {
+ # any files paths with /../ in them refuse to deal with
+ &Failure($client, "refused\n", "$cmd:$tail");
+ } else {
+ my $udir = &propath($udom,$uname);
+ if (-e $udir) {
+ my $oldfile=$udir.'/userfiles/'.$old;
+ my $newfile=$udir.'/userfiles/'.$new;
+ if (-e $newfile) {
+ &Failure($client, "exists\n", "$cmd:$tail");
+ } elsif (! -e $oldfile) {
+ &Failure($client, "not_found\n", "$cmd:$tail");
+ } else {
+ if (!rename($oldfile,$newfile)) {
+ &Failure($client, "failed\n", "$cmd:$tail");
+ } else {
+ &Reply($client, "ok\n", "$cmd:$tail");
+ }
+ }
+ } else {
+ &Failure($client, "not_home\n", "$cmd:$tail");
+ }
+ }
+ return 1;
+}
+®ister_handler("renameuserfile", \&rename_user_file_handler, 0,1,0);
+
+#
+# Authenticate access to a user file by checking that the token the user's
+# passed also exists in their session file
+#
+# Parameters:
+# cmd - The request keyword that dispatched to tus.
+# tail - The tail of the request (colon separated parameters).
+# client - Filehandle open on the client.
+# Return:
+# 1.
+sub token_auth_user_file_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my ($fname, $session) = split(/:/, $tail);
+
+ chomp($session);
+ my $reply="non_auth\n";
+ if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'.
+ $session.'.id')) {
+ while (my $line=) {
+ if ($line=~ m|userfile\.\Q$fname\E\=|) { $reply="ok\n"; }
+ }
+ close(ENVIN);
+ &Reply($client, $reply, "$cmd:$tail");
+ } else {
+ &Failure($client, "invalid_token\n", "$cmd:$tail");
+ }
+ return 1;
+
+}
+®ister_handler("tokenauthuserfile", \&token_auth_user_file_handler, 0,1,0);
+
+#
+# Unsubscribe from a resource.
+#
+# Parameters:
+# $cmd - The command that got us here.
+# $tail - Tail of the command (remaining parameters).
+# $client - File descriptor connected to client.
+# Returns
+# 0 - Requested to exit, caller should shut down.
+# 1 - Continue processing.
+#
+sub unsubscribe_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput= "$cmd:$tail";
+
+ my ($fname) = split(/:/,$tail); # Split in case there's extrs.
+
+ &Debug("Unsubscribing $fname");
+ if (-e $fname) {
+ &Debug("Exists");
+ &Reply($client, &unsub($fname,$clientip), $userinput);
+ } else {
+ &Failure($client, "not_found\n", $userinput);
+ }
+ return 1;
+}
+®ister_handler("unsub", \&unsubscribe_handler, 0, 1, 0);
+
+# Subscribe to a resource
+#
+# Parameters:
+# $cmd - The command that got us here.
+# $tail - Tail of the command (remaining parameters).
+# $client - File descriptor connected to client.
+# Returns
+# 0 - Requested to exit, caller should shut down.
+# 1 - Continue processing.
+#
+sub subscribe_handler {
+ my ($cmd, $tail, $client)= @_;
+
+ my $userinput = "$cmd:$tail";
+
+ &Reply( $client, &subscribe($userinput,$clientip), $userinput);
+
+ return 1;
+}
+®ister_handler("sub", \&subscribe_handler, 0, 1, 0);
+
+#
+# Determine the version of a resource (?) Or is it return
+# the top version of the resource? Not yet clear from the
+# code in currentversion.
+#
+# Parameters:
+# $cmd - The command that got us here.
+# $tail - Tail of the command (remaining parameters).
+# $client - File descriptor connected to client.
+# Returns
+# 0 - Requested to exit, caller should shut down.
+# 1 - Continue processing.
+#
+sub current_version_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput= "$cmd:$tail";
+
+ my $fname = $tail;
+ &Reply( $client, ¤tversion($fname)."\n", $userinput);
+ return 1;
+
+}
+®ister_handler("currentversion", \¤t_version_handler, 0, 1, 0);
+
+# Make an entry in a user's activity log.
+#
+# Parameters:
+# $cmd - The command that got us here.
+# $tail - Tail of the command (remaining parameters).
+# $client - File descriptor connected to client.
+# Returns
+# 0 - Requested to exit, caller should shut down.
+# 1 - Continue processing.
+#
+sub activity_log_handler {
+ my ($cmd, $tail, $client) = @_;
+
+
+ my $userinput= "$cmd:$tail";
+
+ my ($udom,$uname,$what)=split(/:/,$tail);
+ chomp($what);
+ my $proname=&propath($udom,$uname);
+ my $now=time;
+ my $hfh;
+ if ($hfh=IO::File->new(">>$proname/activity.log")) {
+ print $hfh "$now:$clientname:$what\n";
+ &Reply( $client, "ok\n", $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)." IO::File->new Failed "
+ ."while attempting log\n",
+ $userinput);
+ }
+
+ return 1;
+}
+®ister_handler("log", \&activity_log_handler, 0, 1, 0);
+
+#
+# Put a namespace entry in a user profile hash.
+# My druthers would be for this to be an encrypted interaction too.
+# anything that might be an inadvertent covert channel about either
+# user authentication or user personal information....
+#
+# Parameters:
+# $cmd - The command that got us here.
+# $tail - Tail of the command (remaining parameters).
+# $client - File descriptor connected to client.
+# Returns
+# 0 - Requested to exit, caller should shut down.
+# 1 - Continue processing.
+#
+sub put_user_profile_entry {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+
+ my ($udom,$uname,$namespace,$what) =split(/:/,$tail,4);
+ if ($namespace ne 'roles') {
+ chomp($what);
+ my $hashref = &tie_user_hash($udom, $uname, $namespace,
+ &GDBM_WRCREAT(),"P",$what);
+ if($hashref) {
+ my @pairs=split(/\&/,$what);
+ foreach my $pair (@pairs) {
+ my ($key,$value)=split(/=/,$pair);
+ $hashref->{$key}=$value;
+ }
+ if (&untie_user_hash($hashref)) {
+ &Reply( $client, "ok\n", $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)." untie(GDBM) failed ".
+ "while attempting put\n",
+ $userinput);
+ }
+ } else {
+ &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting put\n", $userinput);
+ }
+ } else {
+ &Failure( $client, "refused\n", $userinput);
+ }
+
+ return 1;
+}
+®ister_handler("put", \&put_user_profile_entry, 0, 1, 0);
+
+# Put a piece of new data in hash, returns error if entry already exists
+# Parameters:
+# $cmd - The command that got us here.
+# $tail - Tail of the command (remaining parameters).
+# $client - File descriptor connected to client.
+# Returns
+# 0 - Requested to exit, caller should shut down.
+# 1 - Continue processing.
+#
+sub newput_user_profile_entry {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+
+ my ($udom,$uname,$namespace,$what) =split(/:/,$tail,4);
+ if ($namespace eq 'roles') {
+ &Failure( $client, "refused\n", $userinput);
+ return 1;
+ }
+
+ chomp($what);
+
+ my $hashref = &tie_user_hash($udom, $uname, $namespace,
+ &GDBM_WRCREAT(),"N",$what);
+ if(!$hashref) {
+ &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting put\n", $userinput);
+ return 1;
+ }
+
+ my @pairs=split(/\&/,$what);
+ foreach my $pair (@pairs) {
+ my ($key,$value)=split(/=/,$pair);
+ if (exists($hashref->{$key})) {
+ &Failure($client, "key_exists: ".$key."\n",$userinput);
+ return 1;
+ }
+ }
+
+ foreach my $pair (@pairs) {
+ my ($key,$value)=split(/=/,$pair);
+ $hashref->{$key}=$value;
+ }
+
+ if (&untie_user_hash($hashref)) {
+ &Reply( $client, "ok\n", $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)." untie(GDBM) failed ".
+ "while attempting put\n",
+ $userinput);
+ }
+ return 1;
+}
+®ister_handler("newput", \&newput_user_profile_entry, 0, 1, 0);
+
+#
+# Increment a profile entry in the user history file.
+# The history contains keyword value pairs. In this case,
+# The value itself is a pair of numbers. The first, the current value
+# the second an increment that this function applies to the current
+# value.
+#
+# Parameters:
+# $cmd - The command that got us here.
+# $tail - Tail of the command (remaining parameters).
+# $client - File descriptor connected to client.
+# Returns
+# 0 - Requested to exit, caller should shut down.
+# 1 - Continue processing.
+#
+sub increment_user_value_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+
+ my ($udom,$uname,$namespace,$what) =split(/:/,$tail);
+ if ($namespace ne 'roles') {
+ chomp($what);
+ my $hashref = &tie_user_hash($udom, $uname,
+ $namespace, &GDBM_WRCREAT(),
+ "P",$what);
+ if ($hashref) {
+ my @pairs=split(/\&/,$what);
+ foreach my $pair (@pairs) {
+ my ($key,$value)=split(/=/,$pair);
+ $value = &unescape($value);
+ # We could check that we have a number...
+ if (! defined($value) || $value eq '') {
+ $value = 1;
+ }
+ $hashref->{$key}+=$value;
+ if ($namespace eq 'nohist_resourcetracker') {
+ if ($hashref->{$key} < 0) {
+ $hashref->{$key} = 0;
+ }
+ }
+ }
+ if (&untie_user_hash($hashref)) {
+ &Reply( $client, "ok\n", $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)." untie(GDBM) failed ".
+ "while attempting inc\n", $userinput);
+ }
+ } else {
+ &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting inc\n", $userinput);
+ }
+ } else {
+ &Failure($client, "refused\n", $userinput);
+ }
+
+ return 1;
+}
+®ister_handler("inc", \&increment_user_value_handler, 0, 1, 0);
+
+#
+# Put a new role for a user. Roles are LonCAPA's packaging of permissions.
+# Each 'role' a user has implies a set of permissions. Adding a new role
+# for a person grants the permissions packaged with that role
+# to that user when the role is selected.
+#
+# Parameters:
+# $cmd - The command string (rolesput).
+# $tail - The remainder of the request line. For rolesput this
+# consists of a colon separated list that contains:
+# The domain and user that is granting the role (logged).
+# The domain and user that is getting the role.
+# The roles being granted as a set of & separated pairs.
+# each pair a key value pair.
+# $client - File descriptor connected to the client.
+# Returns:
+# 0 - If the daemon should exit
+# 1 - To continue processing.
+#
+#
+sub roles_put_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+
+ my ( $exedom, $exeuser, $udom, $uname, $what) = split(/:/,$tail);
+
+
+ my $namespace='roles';
+ chomp($what);
+ my $hashref = &tie_user_hash($udom, $uname, $namespace,
+ &GDBM_WRCREAT(), "P",
+ "$exedom:$exeuser:$what");
+ #
+ # Log the attempt to set a role. The {}'s here ensure that the file
+ # handle is open for the minimal amount of time. Since the flush
+ # is done on close this improves the chances the log will be an un-
+ # corrupted ordered thing.
+ if ($hashref) {
+ my $pass_entry = &get_auth_type($udom, $uname);
+ my ($auth_type,$pwd) = split(/:/, $pass_entry);
+ $auth_type = $auth_type.":";
+ my @pairs=split(/\&/,$what);
+ foreach my $pair (@pairs) {
+ my ($key,$value)=split(/=/,$pair);
+ &manage_permissions($key, $udom, $uname,
+ $auth_type);
+ $hashref->{$key}=$value;
+ }
+ if (&untie_user_hash($hashref)) {
+ &Reply($client, "ok\n", $userinput);
+ } else {
+ &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
+ "while attempting rolesput\n", $userinput);
+ }
+ } else {
+ &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting rolesput\n", $userinput);
+ }
+ return 1;
+}
+®ister_handler("rolesput", \&roles_put_handler, 1,1,0); # Encoded client only.
+
+#
+# Deletes (removes) a role for a user. This is equivalent to removing
+# a permissions package associated with the role from the user's profile.
+#
+# Parameters:
+# $cmd - The command (rolesdel)
+# $tail - The remainder of the request line. This consists
+# of:
+# The domain and user requesting the change (logged)
+# The domain and user being changed.
+# The roles being revoked. These are shipped to us
+# as a bunch of & separated role name keywords.
+# $client - The file handle open on the client.
+# Returns:
+# 1 - Continue processing
+# 0 - Exit.
+#
+sub roles_delete_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+
+ my ($exedom,$exeuser,$udom,$uname,$what)=split(/:/,$tail);
+ &Debug("cmd = ".$cmd." exedom= ".$exedom."user = ".$exeuser." udom=".$udom.
+ "what = ".$what);
+ my $namespace='roles';
+ chomp($what);
+ my $hashref = &tie_user_hash($udom, $uname, $namespace,
+ &GDBM_WRCREAT(), "D",
+ "$exedom:$exeuser:$what");
+
+ if ($hashref) {
+ my @rolekeys=split(/\&/,$what);
+
+ foreach my $key (@rolekeys) {
+ delete $hashref->{$key};
+ }
+ if (&untie_user_hash($hashref)) {
+ &Reply($client, "ok\n", $userinput);
+ } else {
+ &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
+ "while attempting rolesdel\n", $userinput);
+ }
+ } else {
+ &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting rolesdel\n", $userinput);
+ }
+
+ return 1;
+}
+®ister_handler("rolesdel", \&roles_delete_handler, 1,1, 0); # Encoded client only
+
+# Unencrypted get from a user's profile database. See
+# GetProfileEntryEncrypted for a version that does end-to-end encryption.
+# This function retrieves a keyed item from a specific named database in the
+# user's directory.
+#
+# Parameters:
+# $cmd - Command request keyword (get).
+# $tail - Tail of the command. This is a colon separated list
+# consisting of the domain and username that uniquely
+# identifies the profile,
+# The 'namespace' which selects the gdbm file to
+# do the lookup in,
+# & separated list of keys to lookup. Note that
+# the values are returned as an & separated list too.
+# $client - File descriptor open on the client.
+# Returns:
+# 1 - Continue processing.
+# 0 - Exit.
+#
+sub get_profile_entry {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput= "$cmd:$tail";
+
+ my ($udom,$uname,$namespace,$what) = split(/:/,$tail);
+ chomp($what);
+
+ my $replystring = read_profile($udom, $uname, $namespace, $what);
+ my ($first) = split(/:/,$replystring);
+ if($first ne "error") {
+ &Reply($client, "$replystring\n", $userinput);
+ } else {
+ &Failure($client, $replystring." while attempting get\n", $userinput);
+ }
+ return 1;
+
+
+}
+®ister_handler("get", \&get_profile_entry, 0,1,0);
+
+#
+# Process the encrypted get request. Note that the request is sent
+# in clear, but the reply is encrypted. This is a small covert channel:
+# information about the sensitive keys is given to the snooper. Just not
+# information about the values of the sensitive key. Hmm if I wanted to
+# know these I'd snoop for the egets. Get the profile item names from them
+# and then issue a get for them since there's no enforcement of the
+# requirement of an encrypted get for particular profile items. If I
+# were re-doing this, I'd force the request to be encrypted as well as the
+# reply. I'd also just enforce encrypted transactions for all gets since
+# that would prevent any covert channel snooping.
+#
+# Parameters:
+# $cmd - Command keyword of request (eget).
+# $tail - Tail of the command. See GetProfileEntry
# for more information about this.
+# $client - File open on the client.
+# Returns:
+# 1 - Continue processing
+# 0 - server should exit.
+sub get_profile_entry_encrypted {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+
+ my ($cmd,$udom,$uname,$namespace,$what) = split(/:/,$userinput);
+ chomp($what);
+ my $qresult = read_profile($udom, $uname, $namespace, $what);
+ my ($first) = split(/:/, $qresult);
+ if($first ne "error") {
+
+ if ($cipher) {
+ my $cmdlength=length($qresult);
+ $qresult.=" ";
+ my $encqresult='';
+ for(my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {
+ $encqresult.= unpack("H16",
+ $cipher->encrypt(substr($qresult,
+ $encidx,
+ 8)));
+ }
+ &Reply( $client, "enc:$cmdlength:$encqresult\n", $userinput);
+ } else {
+ &Failure( $client, "error:no_key\n", $userinput);
+ }
+ } else {
+ &Failure($client, "$qresult while attempting eget\n", $userinput);
+
+ }
+
+ return 1;
+}
+®ister_handler("eget", \&get_profile_entry_encrypted, 0, 1, 0);
+
+#
+# Deletes a key in a user profile database.
+#
+# Parameters:
+# $cmd - Command keyword (del).
+# $tail - Command tail. IN this case a colon
+# separated list containing:
+# The domain and user that identifies uniquely
+# the identity of the user.
+# The profile namespace (name of the profile
+# database file).
+# & separated list of keywords to delete.
+# $client - File open on client socket.
+# Returns:
+# 1 - Continue processing
+# 0 - Exit server.
+#
+#
+sub delete_profile_entry {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "cmd:$tail";
+
+ my ($udom,$uname,$namespace,$what) = split(/:/,$tail);
+ chomp($what);
+ my $hashref = &tie_user_hash($udom, $uname, $namespace,
+ &GDBM_WRCREAT(),
+ "D",$what);
+ if ($hashref) {
+ my @keys=split(/\&/,$what);
+ foreach my $key (@keys) {
+ delete($hashref->{$key});
+ }
+ if (&untie_user_hash($hashref)) {
+ &Reply($client, "ok\n", $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
+ "while attempting del\n", $userinput);
+ }
+ } else {
+ &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting del\n", $userinput);
+ }
+ return 1;
+}
+®ister_handler("del", \&delete_profile_entry, 0, 1, 0);
+
+#
+# List the set of keys that are defined in a profile database file.
+# A successful reply from this will contain an & separated list of
+# the keys.
+# Parameters:
+# $cmd - Command request (keys).
+# $tail - Remainder of the request, a colon separated
+# list containing domain/user that identifies the
+# user being queried, and the database namespace
+# (database filename essentially).
+# $client - File open on the client.
+# Returns:
+# 1 - Continue processing.
+# 0 - Exit the server.
+#
+sub get_profile_keys {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+
+ my ($udom,$uname,$namespace)=split(/:/,$tail);
+ my $qresult='';
+ my $hashref = &tie_user_hash($udom, $uname, $namespace,
+ &GDBM_READER());
+ if ($hashref) {
+ foreach my $key (keys %$hashref) {
+ $qresult.="$key&";
+ }
+ if (&untie_user_hash($hashref)) {
+ $qresult=~s/\&$//;
+ &Reply($client, "$qresult\n", $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
+ "while attempting keys\n", $userinput);
+ }
+ } else {
+ &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting keys\n", $userinput);
+ }
+
+ return 1;
+}
+®ister_handler("keys", \&get_profile_keys, 0, 1, 0);
+
+#
+# Dump the contents of a user profile database.
+# Note that this constitutes a very large covert channel too since
+# the dump will return sensitive information that is not encrypted.
+# The naive security assumption is that the session negotiation ensures
+# our client is trusted and I don't believe that's assured at present.
+# Sure want badly to go to ssl or tls. Of course if my peer isn't really
+# a LonCAPA node they could have negotiated an encryption key too so >sigh<.
+#
+# Parameters:
+# $cmd - The command request keyword (currentdump).
+# $tail - Remainder of the request, consisting of a colon
+# separated list that has the domain/username and
+# the namespace to dump (database file).
+# $client - file open on the remote client.
+# Returns:
+# 1 - Continue processing.
+# 0 - Exit the server.
+#
+sub dump_profile_database {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+
+ my ($udom,$uname,$namespace) = split(/:/,$tail);
+ my $hashref = &tie_user_hash($udom, $uname, $namespace,
+ &GDBM_READER());
+ if ($hashref) {
+ # Structure of %data:
+ # $data{$symb}->{$parameter}=$value;
+ # $data{$symb}->{'v.'.$parameter}=$version;
+ # since $parameter will be unescaped, we do not
+ # have to worry about silly parameter names...
+
+ my $qresult='';
+ my %data = (); # A hash of anonymous hashes..
+ while (my ($key,$value) = each(%$hashref)) {
+ my ($v,$symb,$param) = split(/:/,$key);
+ next if ($v eq 'version' || $symb eq 'keys');
+ # making old style store entries '$ver:$symb:$key = $value'
+ # look like new '$ver:$symb = "$key=$value"'
+ if (defined($param)) { $value = $param.'='.$value; }
+ foreach my $pair (split(/\&/,$value)) {
+ my ($param,$value)=split(/=/,$pair);
+ next if (exists($data{$symb}) &&
+ exists($data{$symb}->{$param}) &&
+ $data{$symb}->{'v.'.$param} > $v);
+ $data{$symb}->{$param}=$value;
+ $data{$symb}->{'v.'.$param}=$v;
+ }
+ }
+ if (&untie_user_hash($hashref)) {
+ while (my ($symb,$param_hash) = each(%data)) {
+ while(my ($param,$value) = each (%$param_hash)){
+ next if ($param =~ /^v\./); # Ignore versions...
+ #
+ # Just dump the symb=value pairs separated by &
+ #
+ $qresult.=$symb.':'.$param.'='.$value.'&';
+ }
+ }
+ chop($qresult);
+ &Reply($client , "$qresult\n", $userinput);
+ } else {
+ &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
+ "while attempting currentdump\n", $userinput);
+ }
+ } else {
+ &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting currentdump\n", $userinput);
+ }
+
+ return 1;
+}
+®ister_handler("currentdump", \&dump_profile_database, 0, 1, 0);
+
+#
+# Dump a profile database with an optional regular expression
+# to match against the keys. In this dump, no effort is made
+# to separate symb from version information. Presumably the
+# databases that are dumped by this command are of a different
+# structure. Need to look at this and improve the documentation of
+# both this and the currentdump handler.
+# Parameters:
+# $cmd - The command keyword.
+# $tail - All of the characters after the $cmd:
+# These are expected to be a colon
+# separated list containing:
+# domain/user - identifying the user.
+# namespace - identifying the database.
+# regexp - optional regular expression
+# that is matched against
+# database keywords to do
+# selective dumps.
+# $client - Channel open on the client.
+# Returns:
+# 1 - Continue processing.
+# Side effects:
+# response is written to $client.
+#
+sub dump_with_regexp {
+ my ($cmd, $tail, $client) = @_;
+
+
+ my $userinput = "$cmd:$tail";
+
+ my ($udom,$uname,$namespace,$regexp,$range)=split(/:/,$tail);
+ if (defined($regexp)) {
+ $regexp=&unescape($regexp);
+ } else {
+ $regexp='.';
+ }
+ my ($start,$end);
+ if (defined($range)) {
+ if ($range =~/^(\d+)\-(\d+)$/) {
+ ($start,$end) = ($1,$2);
+ } elsif ($range =~/^(\d+)$/) {
+ ($start,$end) = (0,$1);
+ } else {
+ undef($range);
+ }
+ }
+ my $hashref = &tie_user_hash($udom, $uname, $namespace,
+ &GDBM_READER());
+ if ($hashref) {
+ my $qresult='';
+ my $count=0;
+ while (my ($key,$value) = each(%$hashref)) {
+ if ($regexp eq '.') {
+ $count++;
+ if (defined($range) && $count >= $end) { last; }
+ if (defined($range) && $count < $start) { next; }
+ $qresult.=$key.'='.$value.'&';
+ } else {
+ my $unescapeKey = &unescape($key);
+ if (eval('$unescapeKey=~/$regexp/')) {
+ $count++;
+ if (defined($range) && $count >= $end) { last; }
+ if (defined($range) && $count < $start) { next; }
+ $qresult.="$key=$value&";
+ }
+ }
+ }
+ if (&untie_user_hash($hashref)) {
+ chop($qresult);
+ &Reply($client, "$qresult\n", $userinput);
+ } else {
+ &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
+ "while attempting dump\n", $userinput);
+ }
+ } else {
+ &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting dump\n", $userinput);
+ }
+
+ return 1;
+}
+®ister_handler("dump", \&dump_with_regexp, 0, 1, 0);
+
+# Store a set of key=value pairs associated with a versioned name.
+#
+# Parameters:
+# $cmd - Request command keyword.
+# $tail - Tail of the request. This is a colon
+# separated list containing:
+# domain/user - User and authentication domain.
+# namespace - Name of the database being modified
+# rid - Resource keyword to modify.
+# what - new value associated with rid.
+#
+# $client - Socket open on the client.
+#
+#
+# Returns:
+# 1 (keep on processing).
+# Side-Effects:
+# Writes to the client
+sub store_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+
+ my ($udom,$uname,$namespace,$rid,$what) =split(/:/,$tail);
+ if ($namespace ne 'roles') {
+
+ chomp($what);
+ my @pairs=split(/\&/,$what);
+ my $hashref = &tie_user_hash($udom, $uname, $namespace,
+ &GDBM_WRCREAT(), "S",
+ "$rid:$what");
+ if ($hashref) {
+ my $now = time;
+ my @previouskeys=split(/&/,$hashref->{"keys:$rid"});
+ my $key;
+ $hashref->{"version:$rid"}++;
+ my $version=$hashref->{"version:$rid"};
+ my $allkeys='';
+ foreach my $pair (@pairs) {
+ my ($key)=split(/=/,$pair);
+ $allkeys.=$key.':';
+ }
+ $hashref->{"$version:$rid"}=$what."\×tamp=$now";
+ $allkeys.='timestamp';
+ $hashref->{"$version:keys:$rid"}=$allkeys;
+ if (&untie_user_hash($hashref)) {
+ &Reply($client, "ok\n", $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
+ "while attempting store\n", $userinput);
+ }
+ } else {
+ &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting store\n", $userinput);
+ }
+ } else {
+ &Failure($client, "refused\n", $userinput);
+ }
+
+ return 1;
+}
+®ister_handler("store", \&store_handler, 0, 1, 0);
+
+#
+# Dump out all versions of a resource that has key=value pairs associated
+# with it for each version. These resources are built up via the store
+# command.
+#
+# Parameters:
+# $cmd - Command keyword.
+# $tail - Remainder of the request which consists of:
+# domain/user - User and auth. domain.
+# namespace - name of resource database.
+# rid - Resource id.
+# $client - socket open on the client.
+#
+# Returns:
+# 1 indicating the caller should not yet exit.
+# Side-effects:
+# Writes a reply to the client.
+# The reply is a string of the following shape:
+# version=current&version:keys=k1:k2...&1:k1=v1&1:k2=v2...
+# Where the 1 above represents version 1.
+# this continues for all pairs of keys in all versions.
+#
+#
+#
+#
+sub restore_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail"; # Only used for logging purposes.
+
+ my ($cmd,$udom,$uname,$namespace,$rid) = split(/:/,$userinput);
+ $namespace=~s/\//\_/g;
+ $namespace=~s/\W//g;
+ chomp($rid);
+ my $qresult='';
+ my $hashref = &tie_user_hash($udom, $uname, $namespace, &GDBM_READER());
+ if ($hashref) {
+ my $version=$hashref->{"version:$rid"};
+ $qresult.="version=$version&";
+ my $scope;
+ for ($scope=1;$scope<=$version;$scope++) {
+ my $vkeys=$hashref->{"$scope:keys:$rid"};
+ my @keys=split(/:/,$vkeys);
+ my $key;
+ $qresult.="$scope:keys=$vkeys&";
+ if (exists($hashref->{"$scope:$rid"})) {
+ my $what=$hashref->{"$scope:$rid"};
+ foreach my $pair (split(/\&/,$hashref->{"$scope:$rid"})) {
+ my ($key,$value)=split(/=/,$pair);
+ $qresult.="$scope:".$pair."&";
+ }
+ } else {
+ foreach $key (@keys) {
+ $qresult.="$scope:$key=".$hashref->{"$scope:$rid:$key"}."&";
+ }
+ }
+ }
+ if (&untie_user_hash($hashref)) {
+ $qresult=~s/\&$//;
+ &Reply( $client, "$qresult\n", $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
+ "while attempting restore\n", $userinput);
+ }
+ } else {
+ &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting restore\n", $userinput);
+ }
+
+ return 1;
+
+
+}
+®ister_handler("restore", \&restore_handler, 0,1,0);
+
+#
+# Add a chat message to to a discussion board.
+#
+# Parameters:
+# $cmd - Request keyword.
+# $tail - Tail of the command. A colon separated list
+# containing:
+# cdom - Domain on which the chat board lives
+# cnum - Identifier of the discussion group.
+# post - Body of the posting.
+# $client - Socket open on the client.
+# Returns:
+# 1 - Indicating caller should keep on processing.
+#
+# Side-effects:
+# writes a reply to the client.
+#
+#
+sub send_chat_handler {
+ my ($cmd, $tail, $client) = @_;
+
+
+ my $userinput = "$cmd:$tail";
+
+ my ($cdom,$cnum,$newpost)=split(/\:/,$tail);
+ &chat_add($cdom,$cnum,$newpost);
+ &Reply($client, "ok\n", $userinput);
+
+ return 1;
+}
+®ister_handler("chatsend", \&send_chat_handler, 0, 1, 0);
+
+#
+# Retrieve the set of chat messagss from a discussion board.
+#
+# Parameters:
+# $cmd - Command keyword that initiated the request.
+# $tail - Remainder of the request after the command
+# keyword. In this case a colon separated list of
+# chat domain - Which discussion board.
+# chat id - Discussion thread(?)
+# domain/user - Authentication domain and username
+# of the requesting person.
+# $client - Socket open on the client program.
+# Returns:
+# 1 - continue processing
+# Side effects:
+# Response is written to the client.
+#
+sub retrieve_chat_handler {
+ my ($cmd, $tail, $client) = @_;
+
+
+ my $userinput = "$cmd:$tail";
+
+ my ($cdom,$cnum,$udom,$uname)=split(/\:/,$tail);
+ my $reply='';
+ foreach (&get_chat($cdom,$cnum,$udom,$uname)) {
+ $reply.=&escape($_).':';
+ }
+ $reply=~s/\:$//;
+ &Reply($client, $reply."\n", $userinput);
+
+
+ return 1;
+}
+®ister_handler("chatretr", \&retrieve_chat_handler, 0, 1, 0);
+
+#
+# Initiate a query of an sql database. SQL query repsonses get put in
+# a file for later retrieval. This prevents sql query results from
+# bottlenecking the system. Note that with loncnew, perhaps this is
+# less of an issue since multiple outstanding requests can be concurrently
+# serviced.
+#
+# Parameters:
+# $cmd - COmmand keyword that initiated the request.
+# $tail - Remainder of the command after the keyword.
+# For this function, this consists of a query and
+# 3 arguments that are self-documentingly labelled
+# in the original arg1, arg2, arg3.
+# $client - Socket open on the client.
+# Return:
+# 1 - Indicating processing should continue.
+# Side-effects:
+# a reply is written to $client.
+#
+sub send_query_handler {
+ my ($cmd, $tail, $client) = @_;
+
+
+ my $userinput = "$cmd:$tail";
+
+ my ($query,$arg1,$arg2,$arg3)=split(/\:/,$tail);
+ $query=~s/\n*$//g;
+ &Reply($client, "". &sql_reply("$clientname\&$query".
+ "\&$arg1"."\&$arg2"."\&$arg3")."\n",
+ $userinput);
+
+ return 1;
+}
+®ister_handler("querysend", \&send_query_handler, 0, 1, 0);
+
+#
+# Add a reply to an sql query. SQL queries are done asyncrhonously.
+# The query is submitted via a "querysend" transaction.
+# There it is passed on to the lonsql daemon, queued and issued to
+# mysql.
+# This transaction is invoked when the sql transaction is complete
+# it stores the query results in flie and indicates query completion.
+# presumably local software then fetches this response... I'm guessing
+# the sequence is: lonc does a querysend, we ask lonsql to do it.
+# lonsql on completion of the query interacts with the lond of our
+# client to do a query reply storing two files:
+# - id - The results of the query.
+# - id.end - Indicating the transaction completed.
+# NOTE: id is a unique id assigned to the query and querysend time.
+# Parameters:
+# $cmd - Command keyword that initiated this request.
+# $tail - Remainder of the tail. In this case that's a colon
+# separated list containing the query Id and the
+# results of the query.
+# $client - Socket open on the client.
+# Return:
+# 1 - Indicating that we should continue processing.
+# Side effects:
+# ok written to the client.
+#
+sub reply_query_handler {
+ my ($cmd, $tail, $client) = @_;
+
+
+ my $userinput = "$cmd:$tail";
+
+ my ($cmd,$id,$reply)=split(/:/,$userinput);
+ my $store;
+ my $execdir=$perlvar{'lonDaemons'};
+ if ($store=IO::File->new(">$execdir/tmp/$id")) {
+ $reply=~s/\&/\n/g;
+ print $store $reply;
+ close $store;
+ my $store2=IO::File->new(">$execdir/tmp/$id.end");
+ print $store2 "done\n";
+ close $store2;
+ &Reply($client, "ok\n", $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)
+ ." IO::File->new Failed ".
+ "while attempting queryreply\n", $userinput);
+ }
+
+
+ return 1;
+}
+®ister_handler("queryreply", \&reply_query_handler, 0, 1, 0);
+
+#
+# Process the courseidput request. Not quite sure what this means
+# at the system level sense. It appears a gdbm file in the
+# /home/httpd/lonUsers/$domain/nohist_courseids is tied and
+# a set of entries made in that database.
+#
+# Parameters:
+# $cmd - The command keyword that initiated this request.
+# $tail - Tail of the command. In this case consists of a colon
+# separated list contaning the domain to apply this to and
+# an ampersand separated list of keyword=value pairs.
+# Each value is a colon separated list that includes:
+# description, institutional code and course owner.
+# For backward compatibility with versions included
+# in LON-CAPA 1.1.X (and earlier) and 1.2.X, institutional
+# code and/or course owner are preserved from the existing
+# record when writing a new record in response to 1.1 or
+# 1.2 implementations of lonnet::flushcourselogs().
+#
+# $client - Socket open on the client.
+# Returns:
+# 1 - indicating that processing should continue
+#
+# Side effects:
+# reply is written to the client.
+#
+sub put_course_id_handler {
+ my ($cmd, $tail, $client) = @_;
+
+
+ my $userinput = "$cmd:$tail";
+
+ my ($udom, $what) = split(/:/, $tail,2);
+ chomp($what);
+ my $now=time;
+ my @pairs=split(/\&/,$what);
+
+ my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT());
+ if ($hashref) {
+ foreach my $pair (@pairs) {
+ my ($key,$courseinfo) = split(/=/,$pair,2);
+ $courseinfo =~ s/=/:/g;
+
+ my @current_items = split(/:/,$hashref->{$key});
+ shift(@current_items); # remove description
+ pop(@current_items); # remove last access
+ my $numcurrent = scalar(@current_items);
+
+ my @new_items = split(/:/,$courseinfo);
+ my $numnew = scalar(@new_items);
+ if ($numcurrent > 0) {
+ if ($numnew == 1) { # flushcourselogs() from 1.1 or earlier
+ $courseinfo .= ':'.join(':',@current_items);
+ } elsif ($numnew == 2) { # flushcourselogs() from 1.2.X
+ $courseinfo .= ':'.$current_items[$numcurrent-1];
+ }
+ }
+ $hashref->{$key}=$courseinfo.':'.$now;
+ }
+ if (&untie_domain_hash($hashref)) {
+ &Reply( $client, "ok\n", $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)
+ ." untie(GDBM) Failed ".
+ "while attempting courseidput\n", $userinput);
+ }
+ } else {
+ &Failure($client, "error: ".($!+0)
+ ." tie(GDBM) Failed ".
+ "while attempting courseidput\n", $userinput);
+ }
+
+
+ return 1;
+}
+®ister_handler("courseidput", \&put_course_id_handler, 0, 1, 0);
+
+# Retrieves the value of a course id resource keyword pattern
+# defined since a starting date. Both the starting date and the
+# keyword pattern are optional. If the starting date is not supplied it
+# is treated as the beginning of time. If the pattern is not found,
+# it is treatred as "." matching everything.
+#
+# Parameters:
+# $cmd - Command keyword that resulted in us being dispatched.
+# $tail - The remainder of the command that, in this case, consists
+# of a colon separated list of:
+# domain - The domain in which the course database is
+# defined.
+# since - Optional parameter describing the minimum
+# time of definition(?) of the resources that
+# will match the dump.
+# description - regular expression that is used to filter
+# the dump. Only keywords matching this regexp
+# will be used.
+# institutional code - optional supplied code to filter
+# the dump. Only courses with an institutional code
+# that match the supplied code will be returned.
+# owner - optional supplied username of owner to filter
+# the dump. Only courses for which the course
+# owner matches the supplied username will be
+# returned. Implicit assumption that owner
+# is a user in the domain in which the
+# course database is defined.
+# $client - The socket open on the client.
+# Returns:
+# 1 - Continue processing.
+# Side Effects:
+# a reply is written to $client.
+sub dump_course_id_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+
+ my ($udom,$since,$description,$instcodefilter,$ownerfilter,$coursefilter) =split(/:/,$tail);
+ if (defined($description)) {
+ $description=&unescape($description);
+ } else {
+ $description='.';
+ }
+ if (defined($instcodefilter)) {
+ $instcodefilter=&unescape($instcodefilter);
+ } else {
+ $instcodefilter='.';
+ }
+ if (defined($ownerfilter)) {
+ $ownerfilter=&unescape($ownerfilter);
+ } else {
+ $ownerfilter='.';
+ }
+ if (defined($coursefilter)) {
+ $coursefilter=&unescape($coursefilter);
+ } else {
+ $coursefilter='.';
+ }
+
+ unless (defined($since)) { $since=0; }
+ my $qresult='';
+ my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT());
+ if ($hashref) {
+ while (my ($key,$value) = each(%$hashref)) {
+ my ($descr,$lasttime,$inst_code,$owner);
+ my @courseitems = split(/:/,$value);
+ $lasttime = pop(@courseitems);
+ ($descr,$inst_code,$owner)=@courseitems;
+ if ($lasttime<$since) { next; }
+ my $match = 1;
+ unless ($description eq '.') {
+ my $unescapeDescr = &unescape($descr);
+ unless (eval('$unescapeDescr=~/\Q$description\E/i')) {
+ $match = 0;
+ }
+ }
+ unless ($instcodefilter eq '.' || !defined($instcodefilter)) {
+ my $unescapeInstcode = &unescape($inst_code);
+ unless (eval('$unescapeInstcode=~/\Q$instcodefilter\E/i')) {
+ $match = 0;
+ }
+ }
+ unless ($ownerfilter eq '.' || !defined($ownerfilter)) {
+ my $unescapeOwner = &unescape($owner);
+ unless (eval('$unescapeOwner=~/\Q$ownerfilter\E/i')) {
+ $match = 0;
+ }
+ }
+ unless ($coursefilter eq '.' || !defined($coursefilter)) {
+ my $unescapeCourse = &unescape($key);
+ unless (eval('$unescapeCourse=~/^$udom(_)\Q$coursefilter\E$/')) {
+ $match = 0;
+ }
+ }
+ if ($match == 1) {
+ $qresult.=$key.'='.$descr.':'.$inst_code.':'.$owner.'&';
+ }
+ }
+ if (&untie_domain_hash($hashref)) {
+ chop($qresult);
+ &Reply($client, "$qresult\n", $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
+ "while attempting courseiddump\n", $userinput);
+ }
+ } else {
+ &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting courseiddump\n", $userinput);
+ }
+
+
+ return 1;
+}
+®ister_handler("courseiddump", \&dump_course_id_handler, 0, 1, 0);
+
+#
+# Puts an id to a domains id database.
+#
+# Parameters:
+# $cmd - The command that triggered us.
+# $tail - Remainder of the request other than the command. This is a
+# colon separated list containing:
+# $domain - The domain for which we are writing the id.
+# $pairs - The id info to write... this is and & separated list
+# of keyword=value.
+# $client - Socket open on the client.
+# Returns:
+# 1 - Continue processing.
+# Side effects:
+# reply is written to $client.
+#
+sub put_id_handler {
+ my ($cmd,$tail,$client) = @_;
+
+
+ my $userinput = "$cmd:$tail";
+
+ my ($udom,$what)=split(/:/,$tail);
+ chomp($what);
+ my @pairs=split(/\&/,$what);
+ my $hashref = &tie_domain_hash($udom, "ids", &GDBM_WRCREAT(),
+ "P", $what);
+ if ($hashref) {
+ foreach my $pair (@pairs) {
+ my ($key,$value)=split(/=/,$pair);
+ $hashref->{$key}=$value;
+ }
+ if (&untie_domain_hash($hashref)) {
+ &Reply($client, "ok\n", $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
+ "while attempting idput\n", $userinput);
+ }
+ } else {
+ &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting idput\n", $userinput);
+ }
+
+ return 1;
+}
+®ister_handler("idput", \&put_id_handler, 0, 1, 0);
+
+#
+# Retrieves a set of id values from the id database.
+# Returns an & separated list of results, one for each requested id to the
+# client.
+#
+# Parameters:
+# $cmd - Command keyword that caused us to be dispatched.
+# $tail - Tail of the command. Consists of a colon separated:
+# domain - the domain whose id table we dump
+# ids Consists of an & separated list of
+# id keywords whose values will be fetched.
+# nonexisting keywords will have an empty value.
+# $client - Socket open on the client.
+#
+# Returns:
+# 1 - indicating processing should continue.
+# Side effects:
+# An & separated list of results is written to $client.
+#
+sub get_id_handler {
+ my ($cmd, $tail, $client) = @_;
+
+
+ my $userinput = "$client:$tail";
+
+ my ($udom,$what)=split(/:/,$tail);
+ chomp($what);
+ my @queries=split(/\&/,$what);
+ my $qresult='';
+ my $hashref = &tie_domain_hash($udom, "ids", &GDBM_READER());
+ if ($hashref) {
+ for (my $i=0;$i<=$#queries;$i++) {
+ $qresult.="$hashref->{$queries[$i]}&";
+ }
+ if (&untie_domain_hash($hashref)) {
+ $qresult=~s/\&$//;
+ &Reply($client, "$qresult\n", $userinput);
+ } else {
+ &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
+ "while attempting idget\n",$userinput);
+ }
+ } else {
+ &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting idget\n",$userinput);
+ }
+
+ return 1;
+}
+®ister_handler("idget", \&get_id_handler, 0, 1, 0);
+
+#
+# Puts broadcast e-mail sent by Domain Coordinator in nohist_dcmail database
+#
+# Parameters
+# $cmd - Command keyword that caused us to be dispatched.
+# $tail - Tail of the command. Consists of a colon separated:
+# domain - the domain whose dcmail we are recording
+# email Consists of key=value pair
+# where key is unique msgid
+# and value is message (in XML)
+# $client - Socket open on the client.
+#
+# Returns:
+# 1 - indicating processing should continue.
+# Side effects
+# reply is written to $client.
+#
+sub put_dcmail_handler {
+ my ($cmd,$tail,$client) = @_;
+ my $userinput = "$cmd:$tail";
+
+ my ($udom,$what)=split(/:/,$tail);
+ chomp($what);
+ my $hashref = &tie_domain_hash($udom, "nohist_dcmail", &GDBM_WRCREAT());
+ if ($hashref) {
+ my ($key,$value)=split(/=/,$what);
+ $hashref->{$key}=$value;
+ }
+ if (&untie_domain_hash($hashref)) {
+ &Reply($client, "ok\n", $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
+ "while attempting dcmailput\n", $userinput);
+ }
+ return 1;
+}
+®ister_handler("dcmailput", \&put_dcmail_handler, 0, 1, 0);
+
+#
+# Retrieves broadcast e-mail from nohist_dcmail database
+# Returns to client an & separated list of key=value pairs,
+# where key is msgid and value is message information.
+#
+# Parameters
+# $cmd - Command keyword that caused us to be dispatched.
+# $tail - Tail of the command. Consists of a colon separated:
+# domain - the domain whose dcmail table we dump
+# startfilter - beginning of time window
+# endfilter - end of time window
+# sendersfilter - & separated list of username:domain
+# for senders to search for.
+# $client - Socket open on the client.
+#
+# Returns:
+# 1 - indicating processing should continue.
+# Side effects
+# reply (& separated list of msgid=messageinfo pairs) is
+# written to $client.
+#
+sub dump_dcmail_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+ my ($udom,$startfilter,$endfilter,$sendersfilter) = split(/:/,$tail);
+ chomp($sendersfilter);
+ my @senders = ();
+ if (defined($startfilter)) {
+ $startfilter=&unescape($startfilter);
+ } else {
+ $startfilter='.';
+ }
+ if (defined($endfilter)) {
+ $endfilter=&unescape($endfilter);
+ } else {
+ $endfilter='.';
+ }
+ if (defined($sendersfilter)) {
+ $sendersfilter=&unescape($sendersfilter);
+ @senders = map { &unescape($_) } split(/\&/,$sendersfilter);
+ }
+
+ my $qresult='';
+ my $hashref = &tie_domain_hash($udom, "nohist_dcmail", &GDBM_WRCREAT());
+ if ($hashref) {
+ while (my ($key,$value) = each(%$hashref)) {
+ my $match = 1;
+ my ($timestamp,$subj,$uname,$udom) =
+ split(/:/,&unescape(&unescape($key)),5); # yes, twice really
+ $subj = &unescape($subj);
+ unless ($startfilter eq '.' || !defined($startfilter)) {
+ if ($timestamp < $startfilter) {
+ $match = 0;
+ }
+ }
+ unless ($endfilter eq '.' || !defined($endfilter)) {
+ if ($timestamp > $endfilter) {
+ $match = 0;
+ }
+ }
+ unless (@senders < 1) {
+ unless (grep/^$uname:$udom$/,@senders) {
+ $match = 0;
+ }
+ }
+ if ($match == 1) {
+ $qresult.=$key.'='.$value.'&';
+ }
+ }
+ if (&untie_domain_hash($hashref)) {
+ chop($qresult);
+ &Reply($client, "$qresult\n", $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
+ "while attempting dcmaildump\n", $userinput);
+ }
+ } else {
+ &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting dcmaildump\n", $userinput);
+ }
+ return 1;
+}
+
+®ister_handler("dcmaildump", \&dump_dcmail_handler, 0, 1, 0);
+
+#
+# Puts domain roles in nohist_domainroles database
+#
+# Parameters
+# $cmd - Command keyword that caused us to be dispatched.
+# $tail - Tail of the command. Consists of a colon separated:
+# domain - the domain whose roles we are recording
+# role - Consists of key=value pair
+# where key is unique role
+# and value is start/end date information
+# $client - Socket open on the client.
+#
+# Returns:
+# 1 - indicating processing should continue.
+# Side effects
+# reply is written to $client.
+#
+
+sub put_domainroles_handler {
+ my ($cmd,$tail,$client) = @_;
+
+ my $userinput = "$cmd:$tail";
+ my ($udom,$what)=split(/:/,$tail);
+ chomp($what);
+ my @pairs=split(/\&/,$what);
+ my $hashref = &tie_domain_hash($udom, "nohist_domainroles", &GDBM_WRCREAT());
+ if ($hashref) {
+ foreach my $pair (@pairs) {
+ my ($key,$value)=split(/=/,$pair);
+ $hashref->{$key}=$value;
+ }
+ if (&untie_domain_hash($hashref)) {
+ &Reply($client, "ok\n", $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
+ "while attempting domroleput\n", $userinput);
+ }
+ } else {
+ &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting domroleput\n", $userinput);
+ }
+
+ return 1;
+}
+
+®ister_handler("domroleput", \&put_domainroles_handler, 0, 1, 0);
+
+#
+# Retrieves domain roles from nohist_domainroles database
+# Returns to client an & separated list of key=value pairs,
+# where key is role and value is start and end date information.
+#
+# Parameters
+# $cmd - Command keyword that caused us to be dispatched.
+# $tail - Tail of the command. Consists of a colon separated:
+# domain - the domain whose domain roles table we dump
+# $client - Socket open on the client.
+#
+# Returns:
+# 1 - indicating processing should continue.
+# Side effects
+# reply (& separated list of role=start/end info pairs) is
+# written to $client.
+#
+sub dump_domainroles_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+ my ($udom,$startfilter,$endfilter,$rolesfilter) = split(/:/,$tail);
+ chomp($rolesfilter);
+ my @roles = ();
+ if (defined($startfilter)) {
+ $startfilter=&unescape($startfilter);
+ } else {
+ $startfilter='.';
+ }
+ if (defined($endfilter)) {
+ $endfilter=&unescape($endfilter);
+ } else {
+ $endfilter='.';
+ }
+ if (defined($rolesfilter)) {
+ $rolesfilter=&unescape($rolesfilter);
+ @roles = split(/\&/,$rolesfilter);
+ }
+
+ my $hashref = &tie_domain_hash($udom, "nohist_domainroles", &GDBM_WRCREAT());
+ if ($hashref) {
+ my $qresult = '';
+ while (my ($key,$value) = each(%$hashref)) {
+ my $match = 1;
+ my ($start,$end) = split(/:/,&unescape($value));
+ my ($trole,$uname,$udom,$runame,$rudom,$rsec) = split(/:/,&unescape($key));
+ unless ($startfilter eq '.' || !defined($startfilter)) {
+ if ($start >= $startfilter) {
+ $match = 0;
+ }
+ }
+ unless ($endfilter eq '.' || !defined($endfilter)) {
+ if ($end <= $endfilter) {
+ $match = 0;
+ }
+ }
+ unless (@roles < 1) {
+ unless (grep/^$trole$/,@roles) {
+ $match = 0;
+ }
+ }
+ if ($match == 1) {
+ $qresult.=$key.'='.$value.'&';
+ }
+ }
+ if (&untie_domain_hash($hashref)) {
+ chop($qresult);
+ &Reply($client, "$qresult\n", $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
+ "while attempting domrolesdump\n", $userinput);
+ }
+ } else {
+ &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting domrolesdump\n", $userinput);
+ }
+ return 1;
+}
+
+®ister_handler("domrolesdump", \&dump_domainroles_handler, 0, 1, 0);
+
+
+# Process the tmpput command I'm not sure what this does.. Seems to
+# create a file in the lonDaemons/tmp directory of the form $id.tmp
+# where Id is the client's ip concatenated with a sequence number.
+# The file will contain some value that is passed in. Is this e.g.
+# a login token?
+#
+# Parameters:
+# $cmd - The command that got us dispatched.
+# $tail - The remainder of the request following $cmd:
+# In this case this will be the contents of the file.
+# $client - Socket connected to the client.
+# Returns:
+# 1 indicating processing can continue.
+# Side effects:
+# A file is created in the local filesystem.
+# A reply is sent to the client.
+sub tmp_put_handler {
+ my ($cmd, $what, $client) = @_;
+
+ my $userinput = "$cmd:$what"; # Reconstruct for logging.
+
+
+ my $store;
+ $tmpsnum++;
+ my $id=$$.'_'.$clientip.'_'.$tmpsnum;
+ $id=~s/\W/\_/g;
+ $what=~s/\n//g;
+ my $execdir=$perlvar{'lonDaemons'};
+ if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) {
+ print $store $what;
+ close $store;
+ &Reply($client, "$id\n", $userinput);
+ } else {
+ &Failure( $client, "error: ".($!+0)."IO::File->new Failed ".
+ "while attempting tmpput\n", $userinput);
+ }
+ return 1;
+
+}
+®ister_handler("tmpput", \&tmp_put_handler, 0, 1, 0);
+
+# Processes the tmpget command. This command returns the contents
+# of a temporary resource file(?) created via tmpput.
+#
+# Paramters:
+# $cmd - Command that got us dispatched.
+# $id - Tail of the command, contain the id of the resource
+# we want to fetch.
+# $client - socket open on the client.
+# Return:
+# 1 - Inidcating processing can continue.
+# Side effects:
+# A reply is sent to the client.
+#
+sub tmp_get_handler {
+ my ($cmd, $id, $client) = @_;
+
+ my $userinput = "$cmd:$id";
+
+
+ $id=~s/\W/\_/g;
+ my $store;
+ my $execdir=$perlvar{'lonDaemons'};
+ if ($store=IO::File->new("$execdir/tmp/$id.tmp")) {
+ my $reply=<$store>;
+ &Reply( $client, "$reply\n", $userinput);
+ close $store;
+ } else {
+ &Failure( $client, "error: ".($!+0)."IO::File->new Failed ".
+ "while attempting tmpget\n", $userinput);
+ }
+
+ return 1;
+}
+®ister_handler("tmpget", \&tmp_get_handler, 0, 1, 0);
+
+#
+# Process the tmpdel command. This command deletes a temp resource
+# created by the tmpput command.
+#
+# Parameters:
+# $cmd - Command that got us here.
+# $id - Id of the temporary resource created.
+# $client - socket open on the client process.
+#
+# Returns:
+# 1 - Indicating processing should continue.
+# Side Effects:
+# A file is deleted
+# A reply is sent to the client.
+sub tmp_del_handler {
+ my ($cmd, $id, $client) = @_;
+
+ my $userinput= "$cmd:$id";
+
+ chomp($id);
+ $id=~s/\W/\_/g;
+ my $execdir=$perlvar{'lonDaemons'};
+ if (unlink("$execdir/tmp/$id.tmp")) {
+ &Reply($client, "ok\n", $userinput);
+ } else {
+ &Failure( $client, "error: ".($!+0)."Unlink tmp Failed ".
+ "while attempting tmpdel\n", $userinput);
+ }
+
+ return 1;
+
+}
+®ister_handler("tmpdel", \&tmp_del_handler, 0, 1, 0);
+
+#
+# Processes the setannounce command. This command
+# creates a file named announce.txt in the top directory of
+# the documentn root and sets its contents. The announce.txt file is
+# printed in its entirety at the LonCAPA login page. Note:
+# once the announcement.txt fileis created it cannot be deleted.
+# However, setting the contents of the file to empty removes the
+# announcement from the login page of loncapa so who cares.
+#
+# Parameters:
+# $cmd - The command that got us dispatched.
+# $announcement - The text of the announcement.
+# $client - Socket open on the client process.
+# Retunrns:
+# 1 - Indicating request processing should continue
+# Side Effects:
+# The file {DocRoot}/announcement.txt is created.
+# A reply is sent to $client.
+#
+sub set_announce_handler {
+ my ($cmd, $announcement, $client) = @_;
+
+ my $userinput = "$cmd:$announcement";
+
+ chomp($announcement);
+ $announcement=&unescape($announcement);
+ if (my $store=IO::File->new('>'.$perlvar{'lonDocRoot'}.
+ '/announcement.txt')) {
+ print $store $announcement;
+ close $store;
+ &Reply($client, "ok\n", $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)."\n", $userinput);
+ }
+
+ return 1;
+}
+®ister_handler("setannounce", \&set_announce_handler, 0, 1, 0);
+
+#
+# Return the version of the daemon. This can be used to determine
+# the compatibility of cross version installations or, alternatively to
+# simply know who's out of date and who isn't. Note that the version
+# is returned concatenated with the tail.
+# Parameters:
+# $cmd - the request that dispatched to us.
+# $tail - Tail of the request (client's version?).
+# $client - Socket open on the client.
+#Returns:
+# 1 - continue processing requests.
+# Side Effects:
+# Replies with version to $client.
+sub get_version_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = $cmd.$tail;
+
+ &Reply($client, &version($userinput)."\n", $userinput);
+
+
+ return 1;
+}
+®ister_handler("version", \&get_version_handler, 0, 1, 0);
+
+# Set the current host and domain. This is used to support
+# multihomed systems. Each IP of the system, or even separate daemons
+# on the same IP can be treated as handling a separate lonCAPA virtual
+# machine. This command selects the virtual lonCAPA. The client always
+# knows the right one since it is lonc and it is selecting the domain/system
+# from the hosts.tab file.
+# Parameters:
+# $cmd - Command that dispatched us.
+# $tail - Tail of the command (domain/host requested).
+# $socket - Socket open on the client.
+#
+# Returns:
+# 1 - Indicates the program should continue to process requests.
+# Side-effects:
+# The default domain/system context is modified for this daemon.
+# a reply is sent to the client.
+#
+sub set_virtual_host_handler {
+ my ($cmd, $tail, $socket) = @_;
+
+ my $userinput ="$cmd:$tail";
+
+ &Reply($client, &sethost($userinput)."\n", $userinput);
+
+
+ return 1;
+}
+®ister_handler("sethost", \&set_virtual_host_handler, 0, 1, 0);
+
+# Process a request to exit:
+# - "bye" is sent to the client.
+# - The client socket is shutdown and closed.
+# - We indicate to the caller that we should exit.
+# Formal Parameters:
+# $cmd - The command that got us here.
+# $tail - Tail of the command (empty).
+# $client - Socket open on the tail.
+# Returns:
+# 0 - Indicating the program should exit!!
+#
+sub exit_handler {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+
+ &logthis("Client $clientip ($clientname) hanging up: $userinput");
+ &Reply($client, "bye\n", $userinput);
+ $client->shutdown(2); # shutdown the socket forcibly.
+ $client->close();
+
+ return 0;
+}
+®ister_handler("exit", \&exit_handler, 0,1,1);
+®ister_handler("init", \&exit_handler, 0,1,1);
+®ister_handler("quit", \&exit_handler, 0,1,1);
+
+# Determine if auto-enrollment is enabled.
+# Note that the original had what I believe to be a defect.
+# The original returned 0 if the requestor was not a registerd client.
+# It should return "refused".
+# Formal Parameters:
+# $cmd - The command that invoked us.
+# $tail - The tail of the command (Extra command parameters.
+# $client - The socket open on the client that issued the request.
+# Returns:
+# 1 - Indicating processing should continue.
+#
+sub enrollment_enabled_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = $cmd.":".$tail; # For logging purposes.
+
+
+ my $cdom = split(/:/, $tail); # Domain we're asking about.
+ my $outcome = &localenroll::run($cdom);
+ &Reply($client, "$outcome\n", $userinput);
+
+ return 1;
+}
+®ister_handler("autorun", \&enrollment_enabled_handler, 0, 1, 0);
+
+# Get the official sections for which auto-enrollment is possible.
+# Since the admin people won't know about 'unofficial sections'
+# we cannot auto-enroll on them.
+# Formal Parameters:
+# $cmd - The command request that got us dispatched here.
+# $tail - The remainder of the request. In our case this
+# will be split into:
+# $coursecode - The course name from the admin point of view.
+# $cdom - The course's domain(?).
+# $client - Socket open on the client.
+# Returns:
+# 1 - Indiciting processing should continue.
+#
+sub get_sections_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+
+ my ($coursecode, $cdom) = split(/:/, $tail);
+ my @secs = &localenroll::get_sections($coursecode,$cdom);
+ my $seclist = &escape(join(':',@secs));
+
+ &Reply($client, "$seclist\n", $userinput);
+
+
+ return 1;
+}
+®ister_handler("autogetsections", \&get_sections_handler, 0, 1, 0);
+
+# Validate the owner of a new course section.
+#
+# Formal Parameters:
+# $cmd - Command that got us dispatched.
+# $tail - the remainder of the command. For us this consists of a
+# colon separated string containing:
+# $inst - Course Id from the institutions point of view.
+# $owner - Proposed owner of the course.
+# $cdom - Domain of the course (from the institutions
+# point of view?)..
+# $client - Socket open on the client.
+#
+# Returns:
+# 1 - Processing should continue.
+#
+sub validate_course_owner_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+ my ($inst_course_id, $owner, $cdom) = split(/:/, $tail);
+
+ my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom);
+ &Reply($client, "$outcome\n", $userinput);
+
+
+
+ return 1;
+}
+®ister_handler("autonewcourse", \&validate_course_owner_handler, 0, 1, 0);
+
+#
+# Validate a course section in the official schedule of classes
+# from the institutions point of view (part of autoenrollment).
+#
+# Formal Parameters:
+# $cmd - The command request that got us dispatched.
+# $tail - The tail of the command. In this case,
+# this is a colon separated set of words that will be split
+# into:
+# $inst_course_id - The course/section id from the
+# institutions point of view.
+# $cdom - The domain from the institutions
+# point of view.
+# $client - Socket open on the client.
+# Returns:
+# 1 - Indicating processing should continue.
+#
+sub validate_course_section_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+ my ($inst_course_id, $cdom) = split(/:/, $tail);
+
+ my $outcome=&localenroll::validate_courseID($inst_course_id,$cdom);
+ &Reply($client, "$outcome\n", $userinput);
+
+
+ return 1;
+}
+®ister_handler("autovalidatecourse", \&validate_course_section_handler, 0, 1, 0);
+
+#
+# Create a password for a new auto-enrollment user.
+# I think/guess, this password allows access to the institutions
+# AIS class list server/services. Stuart can correct this comment
+# when he finds out how wrong I am.
+#
+# Formal Parameters:
+# $cmd - The command request that got us dispatched.
+# $tail - The tail of the command. In this case this is a colon separated
+# set of words that will be split into:
+# $authparam - An authentication parameter (username??).
+# $cdom - The domain of the course from the institution's
+# point of view.
+# $client - The socket open on the client.
+# Returns:
+# 1 - continue processing.
+#
+sub create_auto_enroll_password_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+
+ my ($authparam, $cdom) = split(/:/, $userinput);
+
+ my ($create_passwd,$authchk);
+ ($authparam,
+ $create_passwd,
+ $authchk) = &localenroll::create_password($authparam,$cdom);
+
+ &Reply($client, &escape($authparam.':'.$create_passwd.':'.$authchk)."\n",
+ $userinput);
+
+
+ return 1;
+}
+®ister_handler("autocreatepassword", \&create_auto_enroll_password_handler,
+ 0, 1, 0);
+
+# Retrieve and remove temporary files created by/during autoenrollment.
+#
+# Formal Parameters:
+# $cmd - The command that got us dispatched.
+# $tail - The tail of the command. In our case this is a colon
+# separated list that will be split into:
+# $filename - The name of the file to remove.
+# The filename is given as a path relative to
+# the LonCAPA temp file directory.
+# $client - Socket open on the client.
+#
+# Returns:
+# 1 - Continue processing.
+sub retrieve_auto_file_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "cmd:$tail";
+
+ my ($filename) = split(/:/, $tail);
+
+ my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename;
+ if ( (-e $source) && ($filename ne '') ) {
+ my $reply = '';
+ if (open(my $fh,$source)) {
+ while (<$fh>) {
+ chomp($_);
+ $_ =~ s/^\s+//g;
+ $_ =~ s/\s+$//g;
+ $reply .= $_;
+ }
+ close($fh);
+ &Reply($client, &escape($reply)."\n", $userinput);
+
+# Does this have to be uncommented??!? (RF).
+#
+# unlink($source);
+ } else {
+ &Failure($client, "error\n", $userinput);
+ }
+ } else {
+ &Failure($client, "error\n", $userinput);
+ }
+
+
+ return 1;
+}
+®ister_handler("autoretrieve", \&retrieve_auto_file_handler, 0,1,0);
+
+#
+# Read and retrieve institutional code format (for support form).
+# Formal Parameters:
+# $cmd - Command that dispatched us.
+# $tail - Tail of the command. In this case it conatins
+# the course domain and the coursename.
+# $client - Socket open on the client.
+# Returns:
+# 1 - Continue processing.
+#
+sub get_institutional_code_format_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+
+ my $reply;
+ my($cdom,$course) = split(/:/,$tail);
+ my @pairs = split/\&/,$course;
+ my %instcodes = ();
+ my %codes = ();
+ my @codetitles = ();
+ my %cat_titles = ();
+ my %cat_order = ();
+ foreach (@pairs) {
+ my ($key,$value) = split/=/,$_;
+ $instcodes{&unescape($key)} = &unescape($value);
+ }
+ my $formatreply = &localenroll::instcode_format($cdom,
+ \%instcodes,
+ \%codes,
+ \@codetitles,
+ \%cat_titles,
+ \%cat_order);
+ if ($formatreply eq 'ok') {
+ my $codes_str = &hash2str(%codes);
+ my $codetitles_str = &array2str(@codetitles);
+ my $cat_titles_str = &hash2str(%cat_titles);
+ my $cat_order_str = &hash2str(%cat_order);
+ &Reply($client,
+ $codes_str.':'.$codetitles_str.':'.$cat_titles_str.':'
+ .$cat_order_str."\n",
+ $userinput);
+ } else {
+ # this else branch added by RF since if not ok, lonc will
+ # hang waiting on reply until timeout.
+ #
+ &Reply($client, "format_error\n", $userinput);
+ }
+
+ return 1;
+}
+®ister_handler("autoinstcodeformat",
+ \&get_institutional_code_format_handler,0,1,0);
+
+# Get domain specific conditions for import of student photographs to a course
+#
+# Retrieves information from photo_permission subroutine in localenroll.
+# Returns outcome (ok) if no processing errors, and whether course owner is
+# required to accept conditions of use (yes/no).
+#
+#
+sub photo_permission_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+ my $cdom = $tail;
+ my ($perm_reqd,$conditions);
+ my $outcome = &localenroll::photo_permission($cdom,\$perm_reqd,
+ \$conditions);
+ &Reply($client, &escape($outcome.':'.$perm_reqd.':'. $conditions)."\n",
+ $userinput);
+}
+®ister_handler("autophotopermission",\&photo_permission_handler,0,1,0);
+
+#
+# Checks if student photo is available for a user in the domain, in the user's
+# directory (in /userfiles/internal/studentphoto.jpg).
+# Uses localstudentphoto:fetch() to ensure there is an up to date copy of
+# the student's photo.
+
+sub photo_check_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+ my ($udom,$uname,$pid) = split(/:/,$tail);
+ $udom = &unescape($udom);
+ $uname = &unescape($uname);
+ $pid = &unescape($pid);
+ my $path=&propath($udom,$uname).'/userfiles/internal/';
+ if (!-e $path) {
+ &mkpath($path);
+ }
+ my $response;
+ my $result = &localstudentphoto::fetch($udom,$uname,$pid,\$response);
+ $result .= ':'.$response;
+ &Reply($client, &escape($result)."\n",$userinput);
+}
+®ister_handler("autophotocheck",\&photo_check_handler,0,1,0);
+
+#
+# Retrieve information from localenroll about whether to provide a button
+# for users who have enbled import of student photos to initiate an
+# update of photo files for registered students. Also include
+# comment to display alongside button.
+
+sub photo_choice_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+ my $cdom = &unescape($tail);
+ my ($update,$comment) = &localenroll::manager_photo_update($cdom);
+ &Reply($client,&escape($update).':'.&escape($comment)."\n",$userinput);
+}
+®ister_handler("autophotochoice",\&photo_choice_handler,0,1,0);
+
+#
+# Gets a student's photo to exist (in the correct image type) in the user's
+# directory.
+# Formal Parameters:
+# $cmd - The command request that got us dispatched.
+# $tail - A colon separated set of words that will be split into:
+# $domain - student's domain
+# $uname - student username
+# $type - image type desired
+# $client - The socket open on the client.
+# Returns:
+# 1 - continue processing.
+
+sub student_photo_handler {
+ my ($cmd, $tail, $client) = @_;
+ my ($domain,$uname,$ext,$type) = split(/:/, $tail);
+
+ my $path=&propath($domain,$uname). '/userfiles/internal/';
+ my $filename = 'studentphoto.'.$ext;
+ if ($type eq 'thumbnail') {
+ $filename = 'studentphoto_tn.'.$ext;
+ }
+ if (-e $path.$filename) {
+ &Reply($client,"ok\n","$cmd:$tail");
+ return 1;
+ }
+ &mkpath($path);
+ my $file;
+ if ($type eq 'thumbnail') {
+ $file=&localstudentphoto::fetch_thumbnail($domain,$uname);
+ } else {
+ $file=&localstudentphoto::fetch($domain,$uname);
+ }
+ if (!$file) {
+ &Failure($client,"unavailable\n","$cmd:$tail");
+ return 1;
+ }
+ if (!-e $path.$filename) { &convert_photo($file,$path.$filename); }
+ if (-e $path.$filename) {
+ &Reply($client,"ok\n","$cmd:$tail");
+ return 1;
+ }
+ &Failure($client,"unable_to_convert\n","$cmd:$tail");
+ return 1;
+}
+®ister_handler("studentphoto", \&student_photo_handler, 0, 1, 0);
+
+# mkpath makes all directories for a file, expects an absolute path with a
+# file or a trailing / if just a dir is passed
+# returns 1 on success 0 on failure
+sub mkpath {
+ my ($file)=@_;
+ my @parts=split(/\//,$file,-1);
+ my $now=$parts[0].'/'.$parts[1].'/'.$parts[2];
+ for (my $i=3;$i<= ($#parts-1);$i++) {
+ $now.='/'.$parts[$i];
+ if (!-e $now) {
+ if (!mkdir($now,0770)) { return 0; }
+ }
+ }
+ return 1;
+}
+
+#---------------------------------------------------------------
+#
+# Getting, decoding and dispatching requests:
+#
+#
+# Get a Request:
+# Gets a Request message from the client. The transaction
+# is defined as a 'line' of text. We remove the new line
+# from the text line.
+#
+sub get_request {
+ my $input = <$client>;
+ chomp($input);
+
+ &Debug("get_request: Request = $input\n");
+
+ &status('Processing '.$clientname.':'.$input);
+
+ return $input;
+}
+#---------------------------------------------------------------
+#
+# Process a request. This sub should shrink as each action
+# gets farmed out into a separat sub that is registered
+# with the dispatch hash.
+#
+# Parameters:
+# user_input - The request received from the client (lonc).
+# Returns:
+# true to keep processing, false if caller should exit.
+#
+sub process_request {
+ my ($userinput) = @_; # Easier for now to break style than to
+ # fix all the userinput -> user_input.
+ my $wasenc = 0; # True if request was encrypted.
+# ------------------------------------------------------------ See if encrypted
+ if ($userinput =~ /^enc/) {
+ $userinput = decipher($userinput);
+ $wasenc=1;
+ if(!$userinput) { # Cipher not defined.
+ &Failure($client, "error: Encrypted data without negotated key\n");
+ return 0;
+ }
+ }
+ Debug("process_request: $userinput\n");
+
+ #
+ # The 'correct way' to add a command to lond is now to
+ # write a sub to execute it and Add it to the command dispatch
+ # hash via a call to register_handler.. The comments to that
+ # sub should give you enough to go on to show how to do this
+ # along with the examples that are building up as this code
+ # is getting refactored. Until all branches of the
+ # if/elseif monster below have been factored out into
+ # separate procesor subs, if the dispatch hash is missing
+ # the command keyword, we will fall through to the remainder
+ # of the if/else chain below in order to keep this thing in
+ # working order throughout the transmogrification.
+
+ my ($command, $tail) = split(/:/, $userinput, 2);
+ chomp($command);
+ chomp($tail);
+ $tail =~ s/(\r)//; # This helps people debugging with e.g. telnet.
+ $command =~ s/(\r)//; # And this too for parameterless commands.
+ if(!$tail) {
+ $tail =""; # defined but blank.
+ }
+
+ &Debug("Command received: $command, encoded = $wasenc");
+
+ if(defined $Dispatcher{$command}) {
+
+ my $dispatch_info = $Dispatcher{$command};
+ my $handler = $$dispatch_info[0];
+ my $need_encode = $$dispatch_info[1];
+ my $client_types = $$dispatch_info[2];
+ Debug("Matched dispatch hash: mustencode: $need_encode "
+ ."ClientType $client_types");
+
+ # Validate the request:
+
+ my $ok = 1;
+ my $requesterprivs = 0;
+ if(&isClient()) {
+ $requesterprivs |= $CLIENT_OK;
+ }
+ if(&isManager()) {
+ $requesterprivs |= $MANAGER_OK;
+ }
+ if($need_encode && (!$wasenc)) {
+ Debug("Must encode but wasn't: $need_encode $wasenc");
+ $ok = 0;
+ }
+ if(($client_types & $requesterprivs) == 0) {
+ Debug("Client not privileged to do this operation");
+ $ok = 0;
+ }
+
+ if($ok) {
+ Debug("Dispatching to handler $command $tail");
+ my $keep_going = &$handler($command, $tail, $client);
+ return $keep_going;
+ } else {
+ Debug("Refusing to dispatch because client did not match requirements");
+ Failure($client, "refused\n", $userinput);
+ return 1;
+ }
+
+ }
+
+ print $client "unknown_cmd\n";
+# -------------------------------------------------------------------- complete
+ Debug("process_request - returning 1");
+ return 1;
+}
+#
+# Decipher encoded traffic
+# Parameters:
+# input - Encoded data.
+# Returns:
+# Decoded data or undef if encryption key was not yet negotiated.
+# Implicit input:
+# cipher - This global holds the negotiated encryption key.
+#
+sub decipher {
+ my ($input) = @_;
+ my $output = '';
+
+
+ if($cipher) {
+ my($enc, $enclength, $encinput) = split(/:/, $input);
+ for(my $encidx = 0; $encidx < length($encinput); $encidx += 16) {
+ $output .=
+ $cipher->decrypt(pack("H16", substr($encinput, $encidx, 16)));
+ }
+ return substr($output, 0, $enclength);
+ } else {
+ return undef;
+ }
+}
+
+#
+# Register a command processor. This function is invoked to register a sub
+# to process a request. Once registered, the ProcessRequest sub can automatically
+# dispatch requests to an appropriate sub, and do the top level validity checking
+# as well:
+# - Is the keyword recognized.
+# - Is the proper client type attempting the request.
+# - Is the request encrypted if it has to be.
+# Parameters:
+# $request_name - Name of the request being registered.
+# This is the command request that will match
+# against the hash keywords to lookup the information
+# associated with the dispatch information.
+# $procedure - Reference to a sub to call to process the request.
+# All subs get called as follows:
+# Procedure($cmd, $tail, $replyfd, $key)
+# $cmd - the actual keyword that invoked us.
+# $tail - the tail of the request that invoked us.
+# $replyfd- File descriptor connected to the client
+# $must_encode - True if the request must be encoded to be good.
+# $client_ok - True if it's ok for a client to request this.
+# $manager_ok - True if it's ok for a manager to request this.
+# Side effects:
+# - On success, the Dispatcher hash has an entry added for the key $RequestName
+# - On failure, the program will die as it's a bad internal bug to try to
+# register a duplicate command handler.
+#
+sub register_handler {
+ my ($request_name,$procedure,$must_encode, $client_ok,$manager_ok) = @_;
+
+ # Don't allow duplication#
+
+ if (defined $Dispatcher{$request_name}) {
+ die "Attempting to define a duplicate request handler for $request_name\n";
+ }
+ # Build the client type mask:
+
+ my $client_type_mask = 0;
+ if($client_ok) {
+ $client_type_mask |= $CLIENT_OK;
+ }
+ if($manager_ok) {
+ $client_type_mask |= $MANAGER_OK;
+ }
+
+ # Enter the hash:
+
+ my @entry = ($procedure, $must_encode, $client_type_mask);
+
+ $Dispatcher{$request_name} = \@entry;
+
+}
+
+
+#------------------------------------------------------------------
+
+
+
+
#
# Convert an error return code from lcpasswd to a string value.
#
@@ -749,7 +4700,7 @@ sub catchexception {
$SIG{'QUIT'}='DEFAULT';
$SIG{__DIE__}='DEFAULT';
&status("Catching exception");
- &logthis("CRITICAL: "
+ &logthis("CRITICAL: "
."ABNORMAL EXIT. Child $$ for server $thisserver died through "
."a crash with this error msg->[$error]");
&logthis('Famous last words: '.$status.' - '.$lastlog);
@@ -757,14 +4708,14 @@ sub catchexception {
$server->close();
die($error);
}
-
sub timeout {
&status("Handling Timeout");
- &logthis("CRITICAL: TIME OUT ".$$."");
+ &logthis("CRITICAL: TIME OUT ".$$."");
&catchexception('Timeout');
}
# -------------------------------- Set signal handlers to record abnormal exits
+
$SIG{'QUIT'}=\&catchexception;
$SIG{__DIE__}=\&catchexception;
@@ -822,7 +4773,7 @@ sub REAPER { # ta
if (defined($children{$pid})) {
&logthis("Child $pid died");
delete($children{$pid});
- } else {
+ } elsif ($pid > 0) {
&logthis("Unknown Child $pid died");
}
} while ( $pid > 0 );
@@ -843,7 +4794,7 @@ sub HUNTSMAN { # si
&logthis("Free socket: ".shutdown($server,2)); # free up socket
my $execdir=$perlvar{'lonDaemons'};
unlink("$execdir/logs/lond.pid");
- &logthis("CRITICAL: Shutting down");
+ &logthis("CRITICAL: Shutting down");
&status("Done killing children");
exit; # clean up with dignity
}
@@ -853,7 +4804,7 @@ sub HUPSMAN { # sig
&status("Killing children for restart (HUP)");
kill 'INT' => keys %children;
&logthis("Free socket: ".shutdown($server,2)); # free up socket
- &logthis("CRITICAL: Restarting");
+ &logthis("CRITICAL: Restarting");
my $execdir=$perlvar{'lonDaemons'};
unlink("$execdir/logs/lond.pid");
&status("Restarting self (HUP)");
@@ -863,7 +4814,7 @@ sub HUPSMAN { # sig
#
# Kill off hashes that describe the host table prior to re-reading it.
# Hashes affected are:
-# %hostid, %hostdom %hostip
+# %hostid, %hostdom %hostip %hostdns.
#
sub KillHostHashes {
foreach my $key (keys %hostid) {
@@ -875,6 +4826,9 @@ sub KillHostHashes {
foreach my $key (keys %hostip) {
delete $hostip{$key};
}
+ foreach my $key (keys %hostdns) {
+ delete $hostdns{$key};
+ }
}
#
# Read in the host table from file and distribute it into the various hashes:
@@ -885,15 +4839,35 @@ sub KillHostHashes {
sub ReadHostTable {
open (CONFIG,"$perlvar{'lonTabDir'}/hosts.tab") || die "Can't read host file";
-
+ my $myloncapaname = $perlvar{'lonHostID'};
+ Debug("My loncapa name is : $myloncapaname");
+ my %name_to_ip;
while (my $configline=) {
- if (!($configline =~ /^\s*\#/)) {
- my ($id,$domain,$role,$name,$ip)=split(/:/,$configline);
- chomp($ip); $ip=~s/\D+$//;
- $hostid{$ip}=$id;
- $hostdom{$id}=$domain;
- $hostip{$id}=$ip;
- if ($id eq $perlvar{'lonHostID'}) { $thisserver=$name; }
+ if ($configline !~ /^\s*\#/ && $configline !~ /^\s*$/ ) {
+ my ($id,$domain,$role,$name)=split(/:/,$configline);
+ $name=~s/\s//g;
+ my $ip;
+ if (!exists($name_to_ip{$name})) {
+ $ip = gethostbyname($name);
+ if (!$ip || length($ip) ne 4) {
+ &logthis("Skipping host $id name $name no IP found\n");
+ next;
+ }
+ $ip=inet_ntoa($ip);
+ $name_to_ip{$name} = $ip;
+ } else {
+ $ip = $name_to_ip{$name};
+ }
+ $hostid{$ip}=$id; # LonCAPA name of host by IP.
+ $hostdom{$id}=$domain; # LonCAPA domain name of host.
+ $hostname{$id}=$name; # LonCAPA name -> DNS name
+ $hostip{$id}=$ip; # IP address of host.
+ $hostdns{$name} = $id; # LonCAPA name of host by DNS.
+
+ if ($id eq $perlvar{'lonHostID'}) {
+ Debug("Found me in the host table: $name");
+ $thisserver=$name;
+ }
}
}
close(CONFIG);
@@ -956,14 +4930,16 @@ sub checkchildren {
&logthis('Going to check on the children');
my $docdir=$perlvar{'lonDocRoot'};
foreach (sort keys %children) {
- sleep 1;
+ #sleep 1;
unless (kill 'USR1' => $_) {
&logthis ('Child '.$_.' is dead');
&logstatus($$.' is dead');
+ delete($children{$_});
}
}
sleep 5;
- $SIG{ALRM} = sub { die "timeout" };
+ $SIG{ALRM} = sub { Debug("timeout");
+ die "timeout"; };
$SIG{__DIE__} = 'DEFAULT';
&status("Checking on the children (waiting for reports)");
foreach (sort keys %children) {
@@ -977,6 +4953,7 @@ sub checkchildren {
#my $result=`echo 'Killed lond process $_.' | mailto $emailto -s '$subj' > /dev/null`;
#$execdir=$perlvar{'lonDaemons'};
#$result=`/bin/cp $execdir/logs/lond.log $execdir/logs/lond.log.$_`;
+ delete($children{$_});
alarm(0);
}
}
@@ -984,6 +4961,7 @@ sub checkchildren {
$SIG{ALRM} = 'DEFAULT';
$SIG{__DIE__} = \&catchexception;
&status("Finished checking children");
+ &logthis('Finished Checking children');
}
# --------------------------------------------------------------------- Logging
@@ -1015,13 +4993,36 @@ sub Debug {
# request - Original request from client.
#
sub Reply {
- my $fd = shift;
- my $reply = shift;
- my $request = shift;
-
+ my ($fd, $reply, $request) = @_;
print $fd $reply;
Debug("Request was $request Reply was $reply");
+ $Transactions++;
+}
+
+
+#
+# Sub to report a failure.
+# This function:
+# - Increments the failure statistic counters.
+# - Invokes Reply to send the error message to the client.
+# Parameters:
+# fd - File descriptor open on the client
+# reply - Reply text to emit.
+# request - The original request message (used by Reply
+# to debug if that's enabled.
+# Implicit outputs:
+# $Failures- The number of failures is incremented.
+# Reply (invoked here) sends a message to the
+# client:
+#
+sub Failure {
+ my $fd = shift;
+ my $reply = shift;
+ my $request = shift;
+
+ $Failures++;
+ Reply($fd, $reply, $request); # That's simple eh?
}
# ------------------------------------------------------------------ Log status
@@ -1029,16 +5030,19 @@ sub logstatus {
&status("Doing logging");
my $docdir=$perlvar{'lonDocRoot'};
{
- my $fh=IO::File->new(">>$docdir/lon-status/londstatus.txt");
- print $fh $$."\t".$clientname."\t".$currenthostid."\t".$status."\t".$lastlog."\n";
- $fh->close();
- }
- &status("Finished londstatus.txt");
- {
my $fh=IO::File->new(">$docdir/lon-status/londchld/$$.txt");
- print $fh $status."\n".$lastlog."\n".time;
+ print $fh $status."\n".$lastlog."\n".time."\n$keymode";
$fh->close();
}
+ &status("Finished $$.txt");
+ {
+ open(LOG,">>$docdir/lon-status/londstatus.txt");
+ flock(LOG,LOCK_EX);
+ print LOG $$."\t".$clientname."\t".$currenthostid."\t"
+ .$status."\t".$lastlog."\t $keymode\n";
+ flock(LOG,LOCK_UN);
+ close(LOG);
+ }
&status("Finished logging");
}
@@ -1095,11 +5099,11 @@ sub reconlonc {
kill USR1 => $loncpid;
} else {
&logthis(
- "CRITICAL: "
+ "CRITICAL: "
."lonc at pid $loncpid not responding, giving up");
}
} else {
- &logthis('CRITICAL: lonc not running, giving up');
+ &logthis('CRITICAL: lonc not running, giving up');
}
}
@@ -1107,12 +5111,12 @@ sub reconlonc {
sub subreply {
my ($cmd,$server)=@_;
- my $peerfile="$perlvar{'lonSockDir'}/$server";
+ my $peerfile="$perlvar{'lonSockDir'}/".$hostname{$server};
my $sclient=IO::Socket::UNIX->new(Peer =>"$peerfile",
Type => SOCK_STREAM,
Timeout => 10)
or return "con_lost";
- print $sclient "$cmd\n";
+ print $sclient "sethost:$server:$cmd\n";
my $answer=<$sclient>;
chomp($answer);
if (!$answer) { $answer="con_lost"; }
@@ -1128,7 +5132,7 @@ sub reply {
$answer=subreply("ping",$server);
if ($answer ne $server) {
&logthis("sub reply: answer != server answer is $answer, server is $server");
- &reconlonc("$perlvar{'lonSockDir'}/$server");
+ &reconlonc("$perlvar{'lonSockDir'}/".$hostname{$server});
}
$answer=subreply($cmd,$server);
}
@@ -1140,14 +5144,14 @@ sub reply {
# -------------------------------------------------------------- Talk to lonsql
-sub sqlreply {
+sub sql_reply {
my ($cmd)=@_;
- my $answer=subsqlreply($cmd);
- if ($answer eq 'con_lost') { $answer=subsqlreply($cmd); }
+ my $answer=&sub_sql_reply($cmd);
+ if ($answer eq 'con_lost') { $answer=&sub_sql_reply($cmd); }
return $answer;
}
-sub subsqlreply {
+sub sub_sql_reply {
my ($cmd)=@_;
my $unixsock="mysqlsock";
my $peerfile="$perlvar{'lonSockDir'}/$unixsock";
@@ -1203,7 +5207,7 @@ my $execdir=$perlvar{'lonDaemons'};
open (PIDSAVE,">$execdir/logs/lond.pid");
print PIDSAVE "$$\n";
close(PIDSAVE);
-&logthis("CRITICAL: ---------- Starting ----------");
+&logthis("CRITICAL: ---------- Starting ----------");
&status('Starting');
@@ -1221,6 +5225,8 @@ $SIG{USR2} = \&UpdateHosts;
ReadHostTable;
+my $dist=`$perlvar{'lonDaemons'}/distprobe`;
+
# --------------------------------------------------------------
# Accept connections. When a connection comes in, it is validated
# and if good, a child process is created to process transactions
@@ -1236,7 +5242,7 @@ while (1) {
sub make_new_child {
my $pid;
- my $cipher;
+# my $cipher; # Now global
my $sigset;
$client = shift;
@@ -1265,9 +5271,10 @@ sub make_new_child {
&logthis("Unable to determine who caller was, getpeername returned nothing");
}
if (defined($iaddr)) {
- $clientip=inet_ntoa($iaddr);
+ $clientip = inet_ntoa($iaddr);
+ Debug("Connected with $clientip");
} else {
- &logthis("Unable to determine clinetip");
+ &logthis("Unable to determine clientip");
$clientip='Unavailable';
}
@@ -1292,33 +5299,41 @@ sub make_new_child {
sigprocmask(SIG_UNBLOCK, $sigset)
or die "Can't unblock SIGINT for fork: $!\n";
- my $tmpsnum=0;
+# my $tmpsnum=0; # Now global
#---------------------------------------------------- kerberos 5 initialization
&Authen::Krb5::init_context();
- &Authen::Krb5::init_ets();
+ unless (($dist eq 'fedora4') || ($dist eq 'suse9.3')) {
+ &Authen::Krb5::init_ets();
+ }
&status('Accepted connection');
# =============================================================================
# do something with the connection
# -----------------------------------------------------------------------------
- # see if we know client and check for spoof IP by challenge
+ # see if we know client and 'check' for spoof IP by ineffective challenge
ReadManagerTable; # May also be a manager!!
- my $clientrec=($hostid{$clientip} ne undef);
- my $ismanager=($managers{$clientip} ne undef);
+ my $outsideip=$clientip;
+ if ($clientip eq '127.0.0.1') {
+ $outsideip=$hostip{$perlvar{'lonHostID'}};
+ }
+
+ my $clientrec=($hostid{$outsideip} ne undef);
+ my $ismanager=($managers{$outsideip} ne undef);
$clientname = "[unknonwn]";
if($clientrec) { # Establish client type.
$ConnectionType = "client";
- $clientname = $hostid{$clientip};
+ $clientname = $hostid{$outsideip};
if($ismanager) {
$ConnectionType = "both";
}
} else {
$ConnectionType = "manager";
- $clientname = $managers{$clientip};
+ $clientname = $managers{$outsideip};
}
my $clientok;
+
if ($clientrec || $ismanager) {
&status("Waiting for init from $clientip $clientname");
&logthis('INFO: Connection, '.
@@ -1326,34 +5341,94 @@ sub make_new_child {
" ($clientname) connection type = $ConnectionType " );
&status("Connecting $clientip ($clientname))");
my $remotereq=<$client>;
- $remotereq=~s/[^\w:]//g;
+ chomp($remotereq);
+ Debug("Got init: $remotereq");
+ my $inikeyword = split(/:/, $remotereq);
if ($remotereq =~ /^init/) {
&sethost("sethost:$perlvar{'lonHostID'}");
- my $challenge="$$".time;
- print $client "$challenge\n";
- &status(
- "Waiting for challenge reply from $clientip ($clientname)");
- $remotereq=<$client>;
- $remotereq=~s/\W//g;
- if ($challenge eq $remotereq) {
- $clientok=1;
- print $client "ok\n";
+ #
+ # If the remote is attempting a local init... give that a try:
+ #
+ my ($i, $inittype) = split(/:/, $remotereq);
+
+ # If the connection type is ssl, but I didn't get my
+ # certificate files yet, then I'll drop back to
+ # insecure (if allowed).
+
+ if($inittype eq "ssl") {
+ my ($ca, $cert) = lonssl::CertificateFile;
+ my $kfile = lonssl::KeyFile;
+ if((!$ca) ||
+ (!$cert) ||
+ (!$kfile)) {
+ $inittype = ""; # This forces insecure attempt.
+ &logthis(" Certificates not "
+ ."installed -- trying insecure auth");
+ } else { # SSL certificates are in place so
+ } # Leave the inittype alone.
+ }
+
+ if($inittype eq "local") {
+ my $key = LocalConnection($client, $remotereq);
+ if($key) {
+ Debug("Got local key $key");
+ $clientok = 1;
+ my $cipherkey = pack("H32", $key);
+ $cipher = new IDEA($cipherkey);
+ print $client "ok:local\n";
+ &logthis('");
+ $keymode = "local"
+ } else {
+ Debug("Failed to get local key");
+ $clientok = 0;
+ shutdown($client, 3);
+ close $client;
+ }
+ } elsif ($inittype eq "ssl") {
+ my $key = SSLConnection($client);
+ if ($key) {
+ $clientok = 1;
+ my $cipherkey = pack("H32", $key);
+ $cipher = new IDEA($cipherkey);
+ &logthis(''
+ ."Successfull ssl authentication with $clientname ");
+ $keymode = "ssl";
+
+ } else {
+ $clientok = 0;
+ close $client;
+ }
+
} else {
- &logthis(
- "WARNING: $clientip did not reply challenge");
- &status('No challenge reply '.$clientip);
+ my $ok = InsecureConnection($client);
+ if($ok) {
+ $clientok = 1;
+ &logthis(''
+ ."Successful insecure authentication with $clientname ");
+ print $client "ok\n";
+ $keymode = "insecure";
+ } else {
+ &logthis(''
+ ."Attempted insecure connection disallowed ");
+ close $client;
+ $clientok = 0;
+
+ }
}
} else {
&logthis(
- "WARNING: "
+ "WARNING: "
."$clientip failed to initialize: >$remotereq< ");
&status('No init '.$clientip);
}
+
} else {
&logthis(
- "WARNING: Unknown client $clientip");
+ "WARNING: Unknown client $clientip");
&status('Hung up on '.$clientip);
}
+
if ($clientok) {
# ---------------- New known client connecting, could mean machine online again
@@ -1363,1490 +5438,33 @@ sub make_new_child {
# no need to try to do recon's to myself
next;
}
- &reconlonc("$perlvar{'lonSockDir'}/$id");
+ &reconlonc("$perlvar{'lonSockDir'}/".$hostname{$id});
}
- &logthis("Established connection: $clientname");
+ &logthis("Established connection: $clientname");
&status('Will listen to '.$clientname);
# ------------------------------------------------------------ Process requests
- while (my $userinput=<$client>) {
- chomp($userinput);
- Debug("Request = $userinput\n");
- &status('Processing '.$clientname.': '.$userinput);
- my $wasenc=0;
- alarm(120);
-# ------------------------------------------------------------ See if encrypted
- if ($userinput =~ /^enc/) {
- if ($cipher) {
- my ($cmd,$cmdlength,$encinput)=split(/:/,$userinput);
- $userinput='';
- for (my $encidx=0;$encidxdecrypt(
- pack("H16",substr($encinput,$encidx,16))
- );
- }
- $userinput=substr($userinput,0,$cmdlength);
- $wasenc=1;
- }
- }
-
-# ------------------------------------------------------------- Normal commands
-# ------------------------------------------------------------------------ ping
- if ($userinput =~ /^ping/) { # client only
- if(isClient) {
- print $client "$currenthostid\n";
- } else {
- Reply($client, "refused\n", $userinput);
- }
-# ------------------------------------------------------------------------ pong
- }elsif ($userinput =~ /^pong/) { # client only
- if(isClient) {
- my $reply=&reply("ping",$clientname);
- print $client "$currenthostid:$reply\n";
- } else {
- Reply($client, "refused\n", $userinput);
- }
-# ------------------------------------------------------------------------ ekey
- } elsif ($userinput =~ /^ekey/) { # ok for both clients & mgrs
- my $buildkey=time.$$.int(rand 100000);
- $buildkey=~tr/1-6/A-F/;
- $buildkey=int(rand 100000).$buildkey.int(rand 100000);
- my $key=$currenthostid.$clientname;
- $key=~tr/a-z/A-Z/;
- $key=~tr/G-P/0-9/;
- $key=~tr/Q-Z/0-9/;
- $key=$key.$buildkey.$key.$buildkey.$key.$buildkey;
- $key=substr($key,0,32);
- my $cipherkey=pack("H32",$key);
- $cipher=new IDEA $cipherkey;
- print $client "$buildkey\n";
-# ------------------------------------------------------------------------ load
- } elsif ($userinput =~ /^load/) { # client only
- if (isClient) {
- my $loadavg;
- {
- my $loadfile=IO::File->new('/proc/loadavg');
- $loadavg=<$loadfile>;
- }
- $loadavg =~ s/\s.*//g;
- my $loadpercent=100*$loadavg/$perlvar{'lonLoadLim'};
- print $client "$loadpercent\n";
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# -------------------------------------------------------------------- userload
- } elsif ($userinput =~ /^userload/) { # client only
- if(isClient) {
- my $userloadpercent=&userload();
- print $client "$userloadpercent\n";
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-#
-# Transactions requiring encryption:
-#
-# ----------------------------------------------------------------- currentauth
- } elsif ($userinput =~ /^currentauth/) {
- if (($wasenc==1) && isClient) { # Encoded & client only.
- my ($cmd,$udom,$uname)=split(/:/,$userinput);
- my $result = GetAuthType($udom, $uname);
- if($result eq "nouser") {
- print $client "unknown_user\n";
- }
- else {
- print $client "$result\n"
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-#--------------------------------------------------------------------- pushfile
- } elsif($userinput =~ /^pushfile/) { # encoded & manager.
- if(($wasenc == 1) && isManager) {
- my $cert = GetCertificate($userinput);
- if(ValidManager($cert)) {
- my $reply = PushFile($userinput);
- print $client "$reply\n";
- } else {
- print $client "refused\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-#--------------------------------------------------------------------- reinit
- } elsif($userinput =~ /^reinit/) { # Encoded and manager
- if (($wasenc == 1) && isManager) {
- my $cert = GetCertificate($userinput);
- if(ValidManager($cert)) {
- chomp($userinput);
- my $reply = ReinitProcess($userinput);
- print $client "$reply\n";
- } else {
- print $client "refused\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
- }
-#------------------------------------------------------------------------- edit
- } elsif ($userinput =~ /^edit/) { # encoded and manager:
- if(($wasenc ==1) && (isManager)) {
- my $cert = GetCertificate($userinput);
- if(ValidManager($cert)) {
- my($command, $filetype, $script) = split(/:/, $userinput);
- if (($filetype eq "hosts") || ($filetype eq "domain")) {
- if($script ne "") {
- Reply($client, EditFile($userinput));
- } else {
- Reply($client,"refused\n",$userinput);
- }
- } else {
- Reply($client,"refused\n",$userinput);
- }
- } else {
- Reply($client,"refused\n",$userinput);
- }
- } else {
- Reply($client,"refused\n",$userinput);
- }
-# ------------------------------------------------------------------------ auth
- } elsif ($userinput =~ /^auth/) { # Encoded and client only.
- if (($wasenc==1) && isClient) {
- my ($cmd,$udom,$uname,$upass)=split(/:/,$userinput);
- chomp($upass);
- $upass=unescape($upass);
- my $proname=propath($udom,$uname);
- my $passfilename="$proname/passwd";
- if (-e $passfilename) {
- my $pf = IO::File->new($passfilename);
- my $realpasswd=<$pf>;
- chomp($realpasswd);
- my ($howpwd,$contentpwd)=split(/:/,$realpasswd);
- my $pwdcorrect=0;
- if ($howpwd eq 'internal') {
- &Debug("Internal auth");
- $pwdcorrect=
- (crypt($upass,$contentpwd) eq $contentpwd);
- } elsif ($howpwd eq 'unix') {
- &Debug("Unix auth");
- if((getpwnam($uname))[1] eq "") { #no such user!
- $pwdcorrect = 0;
- } else {
- $contentpwd=(getpwnam($uname))[1];
- my $pwauth_path="/usr/local/sbin/pwauth";
- unless ($contentpwd eq 'x') {
- $pwdcorrect=
- (crypt($upass,$contentpwd) eq
- $contentpwd);
- }
-
- elsif (-e $pwauth_path) {
- open PWAUTH, "|$pwauth_path" or
- die "Cannot invoke authentication";
- print PWAUTH "$uname\n$upass\n";
- close PWAUTH;
- $pwdcorrect=!$?;
- }
- }
- } elsif ($howpwd eq 'krb4') {
- my $null=pack("C",0);
- unless ($upass=~/$null/) {
- my $krb4_error = &Authen::Krb4::get_pw_in_tkt
- ($uname,"",$contentpwd,'krbtgt',
- $contentpwd,1,$upass);
- if (!$krb4_error) {
- $pwdcorrect = 1;
- } else {
- $pwdcorrect=0;
- # log error if it is not a bad password
- if ($krb4_error != 62) {
- &logthis('krb4:'.$uname.','.$contentpwd.','.
- &Authen::Krb4::get_err_txt($Authen::Krb4::error));
- }
- }
- }
- } elsif ($howpwd eq 'krb5') {
- my $null=pack("C",0);
- unless ($upass=~/$null/) {
- my $krbclient=&Authen::Krb5::parse_name($uname.'@'.$contentpwd);
- my $krbservice="krbtgt/".$contentpwd."\@".$contentpwd;
- my $krbserver=&Authen::Krb5::parse_name($krbservice);
- my $credentials=&Authen::Krb5::cc_default();
- $credentials->initialize($krbclient);
- my $krbreturn =
- &Authen::Krb5::get_in_tkt_with_password(
- $krbclient,$krbserver,$upass,$credentials);
-# unless ($krbreturn) {
-# &logthis("Krb5 Error: ".
-# &Authen::Krb5::error());
-# }
- $pwdcorrect = ($krbreturn == 1);
- } else { $pwdcorrect=0; }
- } elsif ($howpwd eq 'localauth') {
- $pwdcorrect=&localauth::localauth($uname,$upass,
- $contentpwd);
- }
- if ($pwdcorrect) {
- print $client "authorized\n";
- } else {
- print $client "non_authorized\n";
- }
- } else {
- print $client "unknown_user\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ---------------------------------------------------------------------- passwd
- } elsif ($userinput =~ /^passwd/) { # encoded and client
- if (($wasenc==1) && isClient) {
- my
- ($cmd,$udom,$uname,$upass,$npass)=split(/:/,$userinput);
- chomp($npass);
- $upass=&unescape($upass);
- $npass=&unescape($npass);
- &Debug("Trying to change password for $uname");
- my $proname=propath($udom,$uname);
- my $passfilename="$proname/passwd";
- if (-e $passfilename) {
- my $realpasswd;
- { my $pf = IO::File->new($passfilename);
- $realpasswd=<$pf>; }
- chomp($realpasswd);
- my ($howpwd,$contentpwd)=split(/:/,$realpasswd);
- if ($howpwd eq 'internal') {
- &Debug("internal auth");
- if (crypt($upass,$contentpwd) eq $contentpwd) {
- my $salt=time;
- $salt=substr($salt,6,2);
- my $ncpass=crypt($npass,$salt);
- {
- my $pf;
- if ($pf = IO::File->new(">$passfilename")) {
- print $pf "internal:$ncpass\n";
- &logthis("Result of password change for $uname: pwchange_success");
- print $client "ok\n";
- } else {
- &logthis("Unable to open $uname passwd to change password");
- print $client "non_authorized\n";
- }
- }
-
- } else {
- print $client "non_authorized\n";
- }
- } elsif ($howpwd eq 'unix') {
- # Unix means we have to access /etc/password
- # one way or another.
- # First: Make sure the current password is
- # correct
- &Debug("auth is unix");
- $contentpwd=(getpwnam($uname))[1];
- my $pwdcorrect = "0";
- my $pwauth_path="/usr/local/sbin/pwauth";
- unless ($contentpwd eq 'x') {
- $pwdcorrect=
- (crypt($upass,$contentpwd) eq $contentpwd);
- } elsif (-e $pwauth_path) {
- open PWAUTH, "|$pwauth_path" or
- die "Cannot invoke authentication";
- print PWAUTH "$uname\n$upass\n";
- close PWAUTH;
- &Debug("exited pwauth with $? ($uname,$upass) ");
- $pwdcorrect=($? == 0);
- }
- if ($pwdcorrect) {
- my $execdir=$perlvar{'lonDaemons'};
- &Debug("Opening lcpasswd pipeline");
- my $pf = IO::File->new("|$execdir/lcpasswd > $perlvar{'lonDaemons'}/logs/lcpasswd.log");
- print $pf "$uname\n$npass\n$npass\n";
- close $pf;
- my $err = $?;
- my $result = ($err>0 ? 'pwchange_failure'
- : 'ok');
- &logthis("Result of password change for $uname: ".
- &lcpasswdstrerror($?));
- print $client "$result\n";
- } else {
- print $client "non_authorized\n";
- }
- } else {
- print $client "auth_mode_error\n";
- }
- } else {
- print $client "unknown_user\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# -------------------------------------------------------------------- makeuser
- } elsif ($userinput =~ /^makeuser/) { # encoded and client.
- &Debug("Make user received");
- my $oldumask=umask(0077);
- if (($wasenc==1) && isClient) {
- my
- ($cmd,$udom,$uname,$umode,$npass)=split(/:/,$userinput);
- &Debug("cmd =".$cmd." $udom =".$udom.
- " uname=".$uname);
- chomp($npass);
- $npass=&unescape($npass);
- my $proname=propath($udom,$uname);
- my $passfilename="$proname/passwd";
- &Debug("Password file created will be:".
- $passfilename);
- if (-e $passfilename) {
- print $client "already_exists\n";
- } elsif ($udom ne $currentdomainid) {
- print $client "not_right_domain\n";
- } else {
- my @fpparts=split(/\//,$proname);
- my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2];
- my $fperror='';
- for (my $i=3;$i<=$#fpparts;$i++) {
- $fpnow.='/'.$fpparts[$i];
- unless (-e $fpnow) {
- unless (mkdir($fpnow,0777)) {
- $fperror="error: ".($!+0)
- ." mkdir failed while attempting "
- ."makeuser";
- }
- }
- }
- unless ($fperror) {
- my $result=&make_passwd_file($uname, $umode,$npass,
- $passfilename);
- print $client $result;
- } else {
- print $client "$fperror\n";
- }
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
- umask($oldumask);
-# -------------------------------------------------------------- changeuserauth
- } elsif ($userinput =~ /^changeuserauth/) { # encoded & client
- &Debug("Changing authorization");
- if (($wasenc==1) && isClient) {
- my
- ($cmd,$udom,$uname,$umode,$npass)=split(/:/,$userinput);
- chomp($npass);
- &Debug("cmd = ".$cmd." domain= ".$udom.
- "uname =".$uname." umode= ".$umode);
- $npass=&unescape($npass);
- my $proname=&propath($udom,$uname);
- my $passfilename="$proname/passwd";
- if ($udom ne $currentdomainid) {
- print $client "not_right_domain\n";
- } else {
- my $result=&make_passwd_file($uname, $umode,$npass,
- $passfilename);
- print $client $result;
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ------------------------------------------------------------------------ home
- } elsif ($userinput =~ /^home/) { # client clear or encoded
- if(isClient) {
- my ($cmd,$udom,$uname)=split(/:/,$userinput);
- chomp($uname);
- my $proname=propath($udom,$uname);
- if (-e $proname) {
- print $client "found\n";
- } else {
- print $client "not_found\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ---------------------------------------------------------------------- update
- } elsif ($userinput =~ /^update/) { # client clear or encoded.
- if(isClient) {
- my ($cmd,$fname)=split(/:/,$userinput);
- my $ownership=ishome($fname);
- if ($ownership eq 'not_owner') {
- if (-e $fname) {
- my ($dev,$ino,$mode,$nlink,
- $uid,$gid,$rdev,$size,
- $atime,$mtime,$ctime,
- $blksize,$blocks)=stat($fname);
- my $now=time;
- my $since=$now-$atime;
- if ($since>$perlvar{'lonExpire'}) {
- my $reply=
- &reply("unsub:$fname","$clientname");
- unlink("$fname");
- } else {
- my $transname="$fname.in.transfer";
- my $remoteurl=
- &reply("sub:$fname","$clientname");
- my $response;
- {
- my $ua=new LWP::UserAgent;
- my $request=new HTTP::Request('GET',"$remoteurl");
- $response=$ua->request($request,$transname);
- }
- if ($response->is_error()) {
- unlink($transname);
- my $message=$response->status_line;
- &logthis(
- "LWP GET: $message for $fname ($remoteurl)");
- } else {
- if ($remoteurl!~/\.meta$/) {
- my $ua=new LWP::UserAgent;
- my $mrequest=
- new HTTP::Request('GET',$remoteurl.'.meta');
- my $mresponse=
- $ua->request($mrequest,$fname.'.meta');
- if ($mresponse->is_error()) {
- unlink($fname.'.meta');
- }
- }
- rename($transname,$fname);
- }
- }
- print $client "ok\n";
- } else {
- print $client "not_found\n";
- }
- } else {
- print $client "rejected\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# -------------------------------------- fetch a user file from a remote server
- } elsif ($userinput =~ /^fetchuserfile/) { # Client clear or enc.
- if(isClient) {
- my ($cmd,$fname)=split(/:/,$userinput);
- my ($udom,$uname,$ufile)=split(/\//,$fname);
- my $udir=propath($udom,$uname).'/userfiles';
- unless (-e $udir) { mkdir($udir,0770); }
- if (-e $udir) {
- $ufile=~s/^[\.\~]+//;
- $ufile=~s/\///g;
- my $destname=$udir.'/'.$ufile;
- my $transname=$udir.'/'.$ufile.'.in.transit';
- my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;
- my $response;
- {
- my $ua=new LWP::UserAgent;
- my $request=new HTTP::Request('GET',"$remoteurl");
- $response=$ua->request($request,$transname);
- }
- if ($response->is_error()) {
- unlink($transname);
- my $message=$response->status_line;
- &logthis("LWP GET: $message for $fname ($remoteurl)");
- print $client "failed\n";
- } else {
- if (!rename($transname,$destname)) {
- &logthis("Unable to move $transname to $destname");
- unlink($transname);
- print $client "failed\n";
- } else {
- print $client "ok\n";
- }
- }
- } else {
- print $client "not_home\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ------------------------------------------ authenticate access to a user file
- } elsif ($userinput =~ /^tokenauthuserfile/) { # Client only
- if(isClient) {
- my ($cmd,$fname,$session)=split(/:/,$userinput);
- chomp($session);
- my $reply='non_auth';
- if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'.
- $session.'.id')) {
- while (my $line=) {
- if ($line=~/userfile\.$fname\=/) { $reply='ok'; }
- }
- close(ENVIN);
- print $client $reply."\n";
- } else {
- print $client "invalid_token\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ----------------------------------------------------------------- unsubscribe
- } elsif ($userinput =~ /^unsub/) {
- if(isClient) {
- my ($cmd,$fname)=split(/:/,$userinput);
- if (-e $fname) {
- print $client &unsub($client,$fname,$clientip);
- } else {
- print $client "not_found\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ------------------------------------------------------------------- subscribe
- } elsif ($userinput =~ /^sub/) {
- if(isClient) {
- print $client &subscribe($userinput,$clientip);
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ------------------------------------------------------------- current version
- } elsif ($userinput =~ /^currentversion/) {
- if(isClient) {
- my ($cmd,$fname)=split(/:/,$userinput);
- print $client ¤tversion($fname)."\n";
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ------------------------------------------------------------------------- log
- } elsif ($userinput =~ /^log/) {
- if(isClient) {
- my ($cmd,$udom,$uname,$what)=split(/:/,$userinput);
- chomp($what);
- my $proname=propath($udom,$uname);
- my $now=time;
- {
- my $hfh;
- if ($hfh=IO::File->new(">>$proname/activity.log")) {
- print $hfh "$now:$clientname:$what\n";
- print $client "ok\n";
- } else {
- print $client "error: ".($!+0)
- ." IO::File->new Failed "
- ."while attempting log\n";
- }
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ------------------------------------------------------------------------- put
- } elsif ($userinput =~ /^put/) {
- if(isClient) {
- my ($cmd,$udom,$uname,$namespace,$what)
- =split(/:/,$userinput);
- $namespace=~s/\//\_/g;
- $namespace=~s/\W//g;
- if ($namespace ne 'roles') {
- chomp($what);
- my $proname=propath($udom,$uname);
- my $now=time;
- unless ($namespace=~/^nohist\_/) {
- my $hfh;
- if (
- $hfh=IO::File->new(">>$proname/$namespace.hist")
- ) { print $hfh "P:$now:$what\n"; }
- }
- my @pairs=split(/\&/,$what);
- my %hash;
- if (tie(%hash,'GDBM_File',
- "$proname/$namespace.db",
- &GDBM_WRCREAT(),0640)) {
- foreach my $pair (@pairs) {
- my ($key,$value)=split(/=/,$pair);
- $hash{$key}=$value;
- }
- if (untie(%hash)) {
- print $client "ok\n";
- } else {
- print $client "error: ".($!+0)
- ." untie(GDBM) failed ".
- "while attempting put\n";
- }
- } else {
- print $client "error: ".($!)
- ." tie(GDBM) Failed ".
- "while attempting put\n";
- }
- } else {
- print $client "refused\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ------------------------------------------------------------------- inc
- } elsif ($userinput =~ /^inc:/) {
- if(isClient) {
- my ($cmd,$udom,$uname,$namespace,$what)
- =split(/:/,$userinput);
- $namespace=~s/\//\_/g;
- $namespace=~s/\W//g;
- if ($namespace ne 'roles') {
- chomp($what);
- my $proname=propath($udom,$uname);
- my $now=time;
- unless ($namespace=~/^nohist\_/) {
- my $hfh;
- if (
- $hfh=IO::File->new(">>$proname/$namespace.hist")
- ) { print $hfh "P:$now:$what\n"; }
- }
- my @pairs=split(/\&/,$what);
- my %hash;
- if (tie(%hash,'GDBM_File',
- "$proname/$namespace.db",
- &GDBM_WRCREAT(),0640)) {
- foreach my $pair (@pairs) {
- my ($key,$value)=split(/=/,$pair);
- # We could check that we have a number...
- if (! defined($value) || $value eq '') {
- $value = 1;
- }
- $hash{$key}+=$value;
- }
- if (untie(%hash)) {
- print $client "ok\n";
- } else {
- print $client "error: ".($!+0)
- ." untie(GDBM) failed ".
- "while attempting put\n";
- }
- } else {
- print $client "error: ".($!)
- ." tie(GDBM) Failed ".
- "while attempting put\n";
- }
- } else {
- print $client "refused\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# -------------------------------------------------------------------- rolesput
- } elsif ($userinput =~ /^rolesput/) {
- if(isClient) {
- &Debug("rolesput");
- if ($wasenc==1) {
- my ($cmd,$exedom,$exeuser,$udom,$uname,$what)
- =split(/:/,$userinput);
- &Debug("cmd = ".$cmd." exedom= ".$exedom.
- "user = ".$exeuser." udom=".$udom.
- "what = ".$what);
- my $namespace='roles';
- chomp($what);
- my $proname=propath($udom,$uname);
- my $now=time;
- {
- my $hfh;
- if (
- $hfh=IO::File->new(">>$proname/$namespace.hist")
- ) {
- print $hfh "P:$now:$exedom:$exeuser:$what\n";
- }
- }
- my @pairs=split(/\&/,$what);
- my %hash;
- if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {
- foreach my $pair (@pairs) {
- my ($key,$value)=split(/=/,$pair);
- &ManagePermissions($key, $udom, $uname,
- &GetAuthType( $udom,
- $uname));
- $hash{$key}=$value;
- }
- if (untie(%hash)) {
- print $client "ok\n";
- } else {
- print $client "error: ".($!+0)
- ." untie(GDBM) Failed ".
- "while attempting rolesput\n";
- }
- } else {
- print $client "error: ".($!+0)
- ." tie(GDBM) Failed ".
- "while attempting rolesput\n";
- }
- } else {
- print $client "refused\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# -------------------------------------------------------------------- rolesdel
- } elsif ($userinput =~ /^rolesdel/) {
- if(isClient) {
- &Debug("rolesdel");
- if ($wasenc==1) {
- my ($cmd,$exedom,$exeuser,$udom,$uname,$what)
- =split(/:/,$userinput);
- &Debug("cmd = ".$cmd." exedom= ".$exedom.
- "user = ".$exeuser." udom=".$udom.
- "what = ".$what);
- my $namespace='roles';
- chomp($what);
- my $proname=propath($udom,$uname);
- my $now=time;
- {
- my $hfh;
- if (
- $hfh=IO::File->new(">>$proname/$namespace.hist")
- ) {
- print $hfh "D:$now:$exedom:$exeuser:$what\n";
- }
- }
- my @rolekeys=split(/\&/,$what);
- my %hash;
- if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {
- foreach my $key (@rolekeys) {
- delete $hash{$key};
- }
- if (untie(%hash)) {
- print $client "ok\n";
- } else {
- print $client "error: ".($!+0)
- ." untie(GDBM) Failed ".
- "while attempting rolesdel\n";
- }
- } else {
- print $client "error: ".($!+0)
- ." tie(GDBM) Failed ".
- "while attempting rolesdel\n";
- }
- } else {
- print $client "refused\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ------------------------------------------------------------------------- get
- } elsif ($userinput =~ /^get/) {
- if(isClient) {
- my ($cmd,$udom,$uname,$namespace,$what)
- =split(/:/,$userinput);
- $namespace=~s/\//\_/g;
- $namespace=~s/\W//g;
- chomp($what);
- my @queries=split(/\&/,$what);
- my $proname=propath($udom,$uname);
- my $qresult='';
- my %hash;
- if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {
- for (my $i=0;$i<=$#queries;$i++) {
- $qresult.="$hash{$queries[$i]}&";
- }
- if (untie(%hash)) {
- $qresult=~s/\&$//;
- print $client "$qresult\n";
- } else {
- print $client "error: ".($!+0)
- ." untie(GDBM) Failed ".
- "while attempting get\n";
- }
- } else {
- if ($!+0 == 2) {
- print $client "error:No such file or ".
- "GDBM reported bad block error\n";
- } else {
- print $client "error: ".($!+0)
- ." tie(GDBM) Failed ".
- "while attempting get\n";
- }
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ------------------------------------------------------------------------ eget
- } elsif ($userinput =~ /^eget/) {
- if (isClient) {
- my ($cmd,$udom,$uname,$namespace,$what)
- =split(/:/,$userinput);
- $namespace=~s/\//\_/g;
- $namespace=~s/\W//g;
- chomp($what);
- my @queries=split(/\&/,$what);
- my $proname=propath($udom,$uname);
- my $qresult='';
- my %hash;
- if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {
- for (my $i=0;$i<=$#queries;$i++) {
- $qresult.="$hash{$queries[$i]}&";
- }
- if (untie(%hash)) {
- $qresult=~s/\&$//;
- if ($cipher) {
- my $cmdlength=length($qresult);
- $qresult.=" ";
- my $encqresult='';
- for
- (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {
- $encqresult.=
- unpack("H16",
- $cipher->encrypt(substr($qresult,$encidx,8)));
- }
- print $client "enc:$cmdlength:$encqresult\n";
- } else {
- print $client "error:no_key\n";
- }
- } else {
- print $client "error: ".($!+0)
- ." untie(GDBM) Failed ".
- "while attempting eget\n";
- }
- } else {
- print $client "error: ".($!+0)
- ." tie(GDBM) Failed ".
- "while attempting eget\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ------------------------------------------------------------------------- del
- } elsif ($userinput =~ /^del/) {
- if(isClient) {
- my ($cmd,$udom,$uname,$namespace,$what)
- =split(/:/,$userinput);
- $namespace=~s/\//\_/g;
- $namespace=~s/\W//g;
- chomp($what);
- my $proname=propath($udom,$uname);
- my $now=time;
- unless ($namespace=~/^nohist\_/) {
- my $hfh;
- if (
- $hfh=IO::File->new(">>$proname/$namespace.hist")
- ) { print $hfh "D:$now:$what\n"; }
- }
- my @keys=split(/\&/,$what);
- my %hash;
- if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {
- foreach my $key (@keys) {
- delete($hash{$key});
- }
- if (untie(%hash)) {
- print $client "ok\n";
- } else {
- print $client "error: ".($!+0)
- ." untie(GDBM) Failed ".
- "while attempting del\n";
- }
- } else {
- print $client "error: ".($!+0)
- ." tie(GDBM) Failed ".
- "while attempting del\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ------------------------------------------------------------------------ keys
- } elsif ($userinput =~ /^keys/) {
- if(isClient) {
- my ($cmd,$udom,$uname,$namespace)
- =split(/:/,$userinput);
- $namespace=~s/\//\_/g;
- $namespace=~s/\W//g;
- my $proname=propath($udom,$uname);
- my $qresult='';
- my %hash;
- if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {
- foreach my $key (keys %hash) {
- $qresult.="$key&";
- }
- if (untie(%hash)) {
- $qresult=~s/\&$//;
- print $client "$qresult\n";
- } else {
- print $client "error: ".($!+0)
- ." untie(GDBM) Failed ".
- "while attempting keys\n";
- }
- } else {
- print $client "error: ".($!+0)
- ." tie(GDBM) Failed ".
- "while attempting keys\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ----------------------------------------------------------------- dumpcurrent
- } elsif ($userinput =~ /^currentdump/) {
- if (isClient) {
- my ($cmd,$udom,$uname,$namespace)
- =split(/:/,$userinput);
- $namespace=~s/\//\_/g;
- $namespace=~s/\W//g;
- my $qresult='';
- my $proname=propath($udom,$uname);
- my %hash;
- if (tie(%hash,'GDBM_File',
- "$proname/$namespace.db",
- &GDBM_READER(),0640)) {
- # Structure of %data:
- # $data{$symb}->{$parameter}=$value;
- # $data{$symb}->{'v.'.$parameter}=$version;
- # since $parameter will be unescaped, we do not
- # have to worry about silly parameter names...
- my %data = ();
- while (my ($key,$value) = each(%hash)) {
- my ($v,$symb,$param) = split(/:/,$key);
- next if ($v eq 'version' || $symb eq 'keys');
- next if (exists($data{$symb}) &&
- exists($data{$symb}->{$param}) &&
- $data{$symb}->{'v.'.$param} > $v);
- $data{$symb}->{$param}=$value;
- $data{$symb}->{'v.'.$param}=$v;
- }
- if (untie(%hash)) {
- while (my ($symb,$param_hash) = each(%data)) {
- while(my ($param,$value) = each (%$param_hash)){
- next if ($param =~ /^v\./);
- $qresult.=$symb.':'.$param.'='.$value.'&';
- }
- }
- chop($qresult);
- print $client "$qresult\n";
- } else {
- print $client "error: ".($!+0)
- ." untie(GDBM) Failed ".
- "while attempting currentdump\n";
- }
- } else {
- print $client "error: ".($!+0)
- ." tie(GDBM) Failed ".
- "while attempting currentdump\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
- }
-# ------------------------------------------------------------------------ dump
- } elsif ($userinput =~ /^dump/) {
- if(isClient) {
- my ($cmd,$udom,$uname,$namespace,$regexp)
- =split(/:/,$userinput);
- $namespace=~s/\//\_/g;
- $namespace=~s/\W//g;
- if (defined($regexp)) {
- $regexp=&unescape($regexp);
- } else {
- $regexp='.';
- }
- my $qresult='';
- my $proname=propath($udom,$uname);
- my %hash;
- if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {
- while (my ($key,$value) = each(%hash)) {
- if ($regexp eq '.') {
- $qresult.=$key.'='.$value.'&';
- } else {
- my $unescapeKey = &unescape($key);
- if (eval('$unescapeKey=~/$regexp/')) {
- $qresult.="$key=$value&";
- }
- }
- }
- if (untie(%hash)) {
- chop($qresult);
- print $client "$qresult\n";
- } else {
- print $client "error: ".($!+0)
- ." untie(GDBM) Failed ".
- "while attempting dump\n";
- }
- } else {
- print $client "error: ".($!+0)
- ." tie(GDBM) Failed ".
- "while attempting dump\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ----------------------------------------------------------------------- store
- } elsif ($userinput =~ /^store/) {
- if(isClient) {
- my ($cmd,$udom,$uname,$namespace,$rid,$what)
- =split(/:/,$userinput);
- $namespace=~s/\//\_/g;
- $namespace=~s/\W//g;
- if ($namespace ne 'roles') {
- chomp($what);
- my $proname=propath($udom,$uname);
- my $now=time;
- unless ($namespace=~/^nohist\_/) {
- my $hfh;
- if (
- $hfh=IO::File->new(">>$proname/$namespace.hist")
- ) { print $hfh "P:$now:$rid:$what\n"; }
- }
- my @pairs=split(/\&/,$what);
- my %hash;
- if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {
- my @previouskeys=split(/&/,$hash{"keys:$rid"});
- my $key;
- $hash{"version:$rid"}++;
- my $version=$hash{"version:$rid"};
- my $allkeys='';
- foreach my $pair (@pairs) {
- my ($key,$value)=split(/=/,$pair);
- $allkeys.=$key.':';
- $hash{"$version:$rid:$key"}=$value;
- }
- $hash{"$version:$rid:timestamp"}=$now;
- $allkeys.='timestamp';
- $hash{"$version:keys:$rid"}=$allkeys;
- if (untie(%hash)) {
- print $client "ok\n";
- } else {
- print $client "error: ".($!+0)
- ." untie(GDBM) Failed ".
- "while attempting store\n";
- }
- } else {
- print $client "error: ".($!+0)
- ." tie(GDBM) Failed ".
- "while attempting store\n";
- }
- } else {
- print $client "refused\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# --------------------------------------------------------------------- restore
- } elsif ($userinput =~ /^restore/) {
- if(isClient) {
- my ($cmd,$udom,$uname,$namespace,$rid)
- =split(/:/,$userinput);
- $namespace=~s/\//\_/g;
- $namespace=~s/\W//g;
- chomp($rid);
- my $proname=propath($udom,$uname);
- my $qresult='';
- my %hash;
- if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {
- my $version=$hash{"version:$rid"};
- $qresult.="version=$version&";
- my $scope;
- for ($scope=1;$scope<=$version;$scope++) {
- my $vkeys=$hash{"$scope:keys:$rid"};
- my @keys=split(/:/,$vkeys);
- my $key;
- $qresult.="$scope:keys=$vkeys&";
- foreach $key (@keys) {
- $qresult.="$scope:$key=".$hash{"$scope:$rid:$key"}."&";
- }
- }
- if (untie(%hash)) {
- $qresult=~s/\&$//;
- print $client "$qresult\n";
- } else {
- print $client "error: ".($!+0)
- ." untie(GDBM) Failed ".
- "while attempting restore\n";
- }
- } else {
- print $client "error: ".($!+0)
- ." tie(GDBM) Failed ".
- "while attempting restore\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# -------------------------------------------------------------------- chatsend
- } elsif ($userinput =~ /^chatsend/) {
- if(isClient) {
- my ($cmd,$cdom,$cnum,$newpost)=split(/\:/,$userinput);
- &chatadd($cdom,$cnum,$newpost);
- print $client "ok\n";
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# -------------------------------------------------------------------- chatretr
- } elsif ($userinput =~ /^chatretr/) {
- if(isClient) {
- my
- ($cmd,$cdom,$cnum,$udom,$uname)=split(/\:/,$userinput);
- my $reply='';
- foreach (&getchat($cdom,$cnum,$udom,$uname)) {
- $reply.=&escape($_).':';
- }
- $reply=~s/\:$//;
- print $client $reply."\n";
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ------------------------------------------------------------------- querysend
- } elsif ($userinput =~ /^querysend/) {
- if(isClient) {
- my ($cmd,$query,
- $arg1,$arg2,$arg3)=split(/\:/,$userinput);
- $query=~s/\n*$//g;
- print $client "".
- sqlreply("$clientname\&$query".
- "\&$arg1"."\&$arg2"."\&$arg3")."\n";
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ------------------------------------------------------------------ queryreply
- } elsif ($userinput =~ /^queryreply/) {
- if(isClient) {
- my ($cmd,$id,$reply)=split(/:/,$userinput);
- my $store;
- my $execdir=$perlvar{'lonDaemons'};
- if ($store=IO::File->new(">$execdir/tmp/$id")) {
- $reply=~s/\&/\n/g;
- print $store $reply;
- close $store;
- my $store2=IO::File->new(">$execdir/tmp/$id.end");
- print $store2 "done\n";
- close $store2;
- print $client "ok\n";
- }
- else {
- print $client "error: ".($!+0)
- ." IO::File->new Failed ".
- "while attempting queryreply\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ----------------------------------------------------------------- courseidput
- } elsif ($userinput =~ /^courseidput/) {
- if(isClient) {
- my ($cmd,$udom,$what)=split(/:/,$userinput);
- chomp($what);
- $udom=~s/\W//g;
- my $proname=
- "$perlvar{'lonUsersDir'}/$udom/nohist_courseids";
- my $now=time;
- my @pairs=split(/\&/,$what);
- my %hash;
- if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) {
- foreach my $pair (@pairs) {
- my ($key,$value)=split(/=/,$pair);
- $hash{$key}=$value.':'.$now;
- }
- if (untie(%hash)) {
- print $client "ok\n";
- } else {
- print $client "error: ".($!+0)
- ." untie(GDBM) Failed ".
- "while attempting courseidput\n";
- }
- } else {
- print $client "error: ".($!+0)
- ." tie(GDBM) Failed ".
- "while attempting courseidput\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ---------------------------------------------------------------- courseiddump
- } elsif ($userinput =~ /^courseiddump/) {
- if(isClient) {
- my ($cmd,$udom,$since,$description)
- =split(/:/,$userinput);
- if (defined($description)) {
- $description=&unescape($description);
- } else {
- $description='.';
- }
- unless (defined($since)) { $since=0; }
- my $qresult='';
- my $proname=
- "$perlvar{'lonUsersDir'}/$udom/nohist_courseids";
- my %hash;
- if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) {
- while (my ($key,$value) = each(%hash)) {
- my ($descr,$lasttime)=split(/\:/,$value);
- if ($lasttime<$since) { next; }
- if ($description eq '.') {
- $qresult.=$key.'='.$descr.'&';
- } else {
- my $unescapeVal = &unescape($descr);
- if (eval('$unescapeVal=~/$description/i')) {
- $qresult.="$key=$descr&";
- }
- }
- }
- if (untie(%hash)) {
- chop($qresult);
- print $client "$qresult\n";
- } else {
- print $client "error: ".($!+0)
- ." untie(GDBM) Failed ".
- "while attempting courseiddump\n";
- }
- } else {
- print $client "error: ".($!+0)
- ." tie(GDBM) Failed ".
- "while attempting courseiddump\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ----------------------------------------------------------------------- idput
- } elsif ($userinput =~ /^idput/) {
- if(isClient) {
- my ($cmd,$udom,$what)=split(/:/,$userinput);
- chomp($what);
- $udom=~s/\W//g;
- my $proname="$perlvar{'lonUsersDir'}/$udom/ids";
- my $now=time;
- {
- my $hfh;
- if (
- $hfh=IO::File->new(">>$proname.hist")
- ) { print $hfh "P:$now:$what\n"; }
- }
- my @pairs=split(/\&/,$what);
- my %hash;
- if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) {
- foreach my $pair (@pairs) {
- my ($key,$value)=split(/=/,$pair);
- $hash{$key}=$value;
- }
- if (untie(%hash)) {
- print $client "ok\n";
- } else {
- print $client "error: ".($!+0)
- ." untie(GDBM) Failed ".
- "while attempting idput\n";
- }
- } else {
- print $client "error: ".($!+0)
- ." tie(GDBM) Failed ".
- "while attempting idput\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ----------------------------------------------------------------------- idget
- } elsif ($userinput =~ /^idget/) {
- if(isClient) {
- my ($cmd,$udom,$what)=split(/:/,$userinput);
- chomp($what);
- $udom=~s/\W//g;
- my $proname="$perlvar{'lonUsersDir'}/$udom/ids";
- my @queries=split(/\&/,$what);
- my $qresult='';
- my %hash;
- if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) {
- for (my $i=0;$i<=$#queries;$i++) {
- $qresult.="$hash{$queries[$i]}&";
- }
- if (untie(%hash)) {
- $qresult=~s/\&$//;
- print $client "$qresult\n";
- } else {
- print $client "error: ".($!+0)
- ." untie(GDBM) Failed ".
- "while attempting idget\n";
- }
- } else {
- print $client "error: ".($!+0)
- ." tie(GDBM) Failed ".
- "while attempting idget\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ---------------------------------------------------------------------- tmpput
- } elsif ($userinput =~ /^tmpput/) {
- if(isClient) {
- my ($cmd,$what)=split(/:/,$userinput);
- my $store;
- $tmpsnum++;
- my $id=$$.'_'.$clientip.'_'.$tmpsnum;
- $id=~s/\W/\_/g;
- $what=~s/\n//g;
- my $execdir=$perlvar{'lonDaemons'};
- if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) {
- print $store $what;
- close $store;
- print $client "$id\n";
- }
- else {
- print $client "error: ".($!+0)
- ."IO::File->new Failed ".
- "while attempting tmpput\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-
-# ---------------------------------------------------------------------- tmpget
- } elsif ($userinput =~ /^tmpget/) {
- if(isClient) {
- my ($cmd,$id)=split(/:/,$userinput);
- chomp($id);
- $id=~s/\W/\_/g;
- my $store;
- my $execdir=$perlvar{'lonDaemons'};
- if ($store=IO::File->new("$execdir/tmp/$id.tmp")) {
- my $reply=<$store>;
- print $client "$reply\n";
- close $store;
- }
- else {
- print $client "error: ".($!+0)
- ."IO::File->new Failed ".
- "while attempting tmpget\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ---------------------------------------------------------------------- tmpdel
- } elsif ($userinput =~ /^tmpdel/) {
- if(isClient) {
- my ($cmd,$id)=split(/:/,$userinput);
- chomp($id);
- $id=~s/\W/\_/g;
- my $execdir=$perlvar{'lonDaemons'};
- if (unlink("$execdir/tmp/$id.tmp")) {
- print $client "ok\n";
- } else {
- print $client "error: ".($!+0)
- ."Unlink tmp Failed ".
- "while attempting tmpdel\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# -------------------------------------------------------------------------- ls
- } elsif ($userinput =~ /^ls/) {
- if(isClient) {
- my $obs;
- my $rights;
- my ($cmd,$ulsdir)=split(/:/,$userinput);
- my $ulsout='';
- my $ulsfn;
- if (-e $ulsdir) {
- if(-d $ulsdir) {
- if (opendir(LSDIR,$ulsdir)) {
- while ($ulsfn=readdir(LSDIR)) {
- undef $obs, $rights;
- my @ulsstats=stat($ulsdir.'/'.$ulsfn);
- #We do some obsolete checking here
- if(-e $ulsdir.'/'.$ulsfn.".meta") {
- open(FILE, $ulsdir.'/'.$ulsfn.".meta");
- my @obsolete=;
- foreach my $obsolete (@obsolete) {
- if($obsolete =~ m|()(on)|) { $obs = 1; }
- if($obsolete =~ m|()(default)|) { $rights = 1; }
- }
- }
- $ulsout.=$ulsfn.'&'.join('&',@ulsstats);
- if($obs eq '1') { $ulsout.="&1"; }
- else { $ulsout.="&0"; }
- if($rights eq '1') { $ulsout.="&1:"; }
- else { $ulsout.="&0:"; }
- }
- closedir(LSDIR);
- }
- } else {
- my @ulsstats=stat($ulsdir);
- $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
- }
- } else {
- $ulsout='no_such_dir';
- }
- if ($ulsout eq '') { $ulsout='empty'; }
- print $client "$ulsout\n";
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ----------------------------------------------------------------- setannounce
- } elsif ($userinput =~ /^setannounce/) {
- if (isClient) {
- my ($cmd,$announcement)=split(/:/,$userinput);
- chomp($announcement);
- $announcement=&unescape($announcement);
- if (my $store=IO::File->new('>'.$perlvar{'lonDocRoot'}.
- '/announcement.txt')) {
- print $store $announcement;
- close $store;
- print $client "ok\n";
- } else {
- print $client "error: ".($!+0)."\n";
- }
- } else {
- Reply($client, "refused\n", $userinput);
-
- }
-# ------------------------------------------------------------------ Hanging up
- } elsif (($userinput =~ /^exit/) ||
- ($userinput =~ /^init/)) { # no restrictions.
- &logthis(
- "Client $clientip ($clientname) hanging up: $userinput");
- print $client "bye\n";
- $client->shutdown(2); # shutdown the socket forcibly.
- $client->close();
- last;
-
-# ---------------------------------- set current host/domain
- } elsif ($userinput =~ /^sethost:/) {
- if (isClient) {
- print $client &sethost($userinput)."\n";
- } else {
- print $client "refused\n";
- }
-#---------------------------------- request file (?) version.
- } elsif ($userinput =~/^version:/) {
- if (isClient) {
- print $client &version($userinput)."\n";
- } else {
- print $client "refused\n";
- }
-# ------------------------------------------------------------- unknown command
-
- } else {
- # unknown command
- print $client "unknown_cmd\n";
- }
-# -------------------------------------------------------------------- complete
+ my $keep_going = 1;
+ my $user_input;
+ while(($user_input = get_request) && $keep_going) {
+ alarm(120);
+ Debug("Main: Got $user_input\n");
+ $keep_going = &process_request($user_input);
alarm(0);
- &status('Listening to '.$clientname);
+ &status('Listening to '.$clientname." ($keymode)");
}
+
# --------------------------------------------- client unknown or fishy, refuse
- } else {
+ } else {
print $client "refused\n";
$client->close();
- &logthis("WARNING: "
+ &logthis("WARNING: "
."Rejected client $clientip, closing connection");
}
- }
+ }
# =============================================================================
- &logthis("CRITICAL: "
+ &logthis("CRITICAL: "
."Disconnect from $clientip ($clientname)");
@@ -2856,8 +5474,35 @@ sub make_new_child {
exit;
}
+#
+# Determine if a user is an author for the indicated domain.
+#
+# Parameters:
+# domain - domain to check in .
+# user - Name of user to check.
+#
+# Return:
+# 1 - User is an author for domain.
+# 0 - User is not an author for domain.
+sub is_author {
+ my ($domain, $user) = @_;
+
+ &Debug("is_author: $user @ $domain");
+
+ my $hashref = &tie_user_hash($domain, $user, "roles",
+ &GDBM_READER());
+ # Author role should show up as a key /domain/_au
+
+ my $key = "/$domain/_au";
+ my $value = $hashref->{$key};
+
+ if(defined($value)) {
+ &Debug("$user @ $domain is an author");
+ }
+ return defined($value);
+}
#
# Checks to see if the input roleput request was to set
# an author role. If so, invokes the lchtmldir script to set
@@ -2869,32 +5514,98 @@ sub make_new_child {
# user - Name of the user for which the role is being put.
# authtype - The authentication type associated with the user.
#
-sub ManagePermissions
-{
- my $request = shift;
- my $domain = shift;
- my $user = shift;
- my $authtype= shift;
+sub manage_permissions {
+ my ($request, $domain, $user, $authtype) = @_;
+
+ &Debug("manage_permissions: $request $domain $user $authtype");
# See if the request is of the form /$domain/_au
- if($request =~ /^(\/$domain\/_au)$/) { # It's an author rolesput...
+ if($request =~ /^(\/\Q$domain\E\/_au)$/) { # It's an author rolesput...
my $execdir = $perlvar{'lonDaemons'};
my $userhome= "/home/$user" ;
&logthis("system $execdir/lchtmldir $userhome $user $authtype");
+ &Debug("Setting homedir permissions for $userhome");
system("$execdir/lchtmldir $userhome $user $authtype");
}
}
+
+
+#
+# Return the full path of a user password file, whether it exists or not.
+# Parameters:
+# domain - Domain in which the password file lives.
+# user - name of the user.
+# Returns:
+# Full passwd path:
+#
+sub password_path {
+ my ($domain, $user) = @_;
+ return &propath($domain, $user).'/passwd';
+}
+
+# Password Filename
+# Returns the path to a passwd file given domain and user... only if
+# it exists.
+# Parameters:
+# domain - Domain in which to search.
+# user - username.
+# Returns:
+# - If the password file exists returns its path.
+# - If the password file does not exist, returns undefined.
+#
+sub password_filename {
+ my ($domain, $user) = @_;
+
+ Debug ("PasswordFilename called: dom = $domain user = $user");
+
+ my $path = &password_path($domain, $user);
+ Debug("PasswordFilename got path: $path");
+ if(-e $path) {
+ return $path;
+ } else {
+ return undef;
+ }
+}
+
+#
+# Rewrite the contents of the user's passwd file.
+# Parameters:
+# domain - domain of the user.
+# name - User's name.
+# contents - New contents of the file.
+# Returns:
+# 0 - Failed.
+# 1 - Success.
+#
+sub rewrite_password_file {
+ my ($domain, $user, $contents) = @_;
+
+ my $file = &password_filename($domain, $user);
+ if (defined $file) {
+ my $pf = IO::File->new(">$file");
+ if($pf) {
+ print $pf "$contents\n";
+ return 1;
+ } else {
+ return 0;
+ }
+ } else {
+ return 0;
+ }
+
+}
+
#
-# GetAuthType - Determines the authorization type of a user in a domain.
+# get_auth_type - Determines the authorization type of a user in a domain.
# Returns the authorization type or nouser if there is no such user.
#
-sub GetAuthType
+sub get_auth_type
{
- my $domain = shift;
- my $user = shift;
- Debug("GetAuthType( $domain, $user ) \n");
+ my ($domain, $user) = @_;
+
+ Debug("get_auth_type( $domain, $user ) \n");
my $proname = &propath($domain, $user);
my $passwdfile = "$proname/passwd";
if( -e $passwdfile ) {
@@ -2904,19 +5615,138 @@ sub GetAuthType
Debug("Password info = $realpassword\n");
my ($authtype, $contentpwd) = split(/:/, $realpassword);
Debug("Authtype = $authtype, content = $contentpwd\n");
- my $availinfo = '';
- if($authtype eq 'krb4' or $authtype eq 'krb5') {
- $availinfo = $contentpwd;
- }
-
- return "$authtype:$availinfo";
- }
- else {
+ return "$authtype:$contentpwd";
+ } else {
Debug("Returning nouser");
return "nouser";
}
}
+#
+# Validate a user given their domain, name and password. This utility
+# function is used by both AuthenticateHandler and ChangePasswordHandler
+# to validate the login credentials of a user.
+# Parameters:
+# $domain - The domain being logged into (this is required due to
+# the capability for multihomed systems.
+# $user - The name of the user being validated.
+# $password - The user's propoposed password.
+#
+# Returns:
+# 1 - The domain,user,pasword triplet corresponds to a valid
+# user.
+# 0 - The domain,user,password triplet is not a valid user.
+#
+sub validate_user {
+ my ($domain, $user, $password) = @_;
+
+
+ # Why negative ~pi you may well ask? Well this function is about
+ # authentication, and therefore very important to get right.
+ # I've initialized the flag that determines whether or not I've
+ # validated correctly to a value it's not supposed to get.
+ # At the end of this function. I'll ensure that it's not still that
+ # value so we don't just wind up returning some accidental value
+ # as a result of executing an unforseen code path that
+ # did not set $validated. At the end of valid execution paths,
+ # validated shoule be 1 for success or 0 for failuer.
+
+ my $validated = -3.14159;
+
+ # How we authenticate is determined by the type of authentication
+ # the user has been assigned. If the authentication type is
+ # "nouser", the user does not exist so we will return 0.
+
+ my $contents = &get_auth_type($domain, $user);
+ my ($howpwd, $contentpwd) = split(/:/, $contents);
+
+ my $null = pack("C",0); # Used by kerberos auth types.
+
+ if ($howpwd ne 'nouser') {
+
+ if($howpwd eq "internal") { # Encrypted is in local password file.
+ $validated = (crypt($password, $contentpwd) eq $contentpwd);
+ }
+ elsif ($howpwd eq "unix") { # User is a normal unix user.
+ $contentpwd = (getpwnam($user))[1];
+ if($contentpwd) {
+ if($contentpwd eq 'x') { # Shadow password file...
+ my $pwauth_path = "/usr/local/sbin/pwauth";
+ open PWAUTH, "|$pwauth_path" or
+ die "Cannot invoke authentication";
+ print PWAUTH "$user\n$password\n";
+ close PWAUTH;
+ $validated = ! $?;
+
+ } else { # Passwords in /etc/passwd.
+ $validated = (crypt($password,
+ $contentpwd) eq $contentpwd);
+ }
+ } else {
+ $validated = 0;
+ }
+ }
+ elsif ($howpwd eq "krb4") { # user is in kerberos 4 auth. domain.
+ if(! ($password =~ /$null/) ) {
+ my $k4error = &Authen::Krb4::get_pw_in_tkt($user,
+ "",
+ $contentpwd,,
+ 'krbtgt',
+ $contentpwd,
+ 1,
+ $password);
+ if(!$k4error) {
+ $validated = 1;
+ } else {
+ $validated = 0;
+ &logthis('krb4: '.$user.', '.$contentpwd.', '.
+ &Authen::Krb4::get_err_txt($Authen::Krb4::error));
+ }
+ } else {
+ $validated = 0; # Password has a match with null.
+ }
+ } elsif ($howpwd eq "krb5") { # User is in kerberos 5 auth. domain.
+ if(!($password =~ /$null/)) { # Null password not allowed.
+ my $krbclient = &Authen::Krb5::parse_name($user.'@'
+ .$contentpwd);
+ my $krbservice = "krbtgt/".$contentpwd."\@".$contentpwd;
+ my $krbserver = &Authen::Krb5::parse_name($krbservice);
+ my $credentials= &Authen::Krb5::cc_default();
+ $credentials->initialize($krbclient);
+ my $krbreturn = &Authen::Krb5::get_in_tkt_with_password($krbclient,
+ $krbserver,
+ $password,
+ $credentials);
+ $validated = ($krbreturn == 1);
+ } else {
+ $validated = 0;
+ }
+ } elsif ($howpwd eq "localauth") {
+ # Authenticate via installation specific authentcation method:
+ $validated = &localauth::localauth($user,
+ $password,
+ $contentpwd);
+ } else { # Unrecognized auth is also bad.
+ $validated = 0;
+ }
+ } else {
+ $validated = 0;
+ }
+ #
+ # $validated has the correct stat of the authentication:
+ #
+
+ unless ($validated != -3.14159) {
+ # I >really really< want to know if this happens.
+ # since it indicates that user authentication is badly
+ # broken in some code path.
+ #
+ die "ValidateUser - failed to set the value of validated $domain, $user $password";
+ }
+ return $validated;
+}
+
+
sub addline {
my ($fname,$hostid,$ip,$newline)=@_;
my $contents;
@@ -2937,40 +5767,40 @@ sub addline {
return $found;
}
-sub getchat {
+sub get_chat {
my ($cdom,$cname,$udom,$uname)=@_;
- my %hash;
- my $proname=&propath($cdom,$cname);
+
my @entries=();
- if (tie(%hash,'GDBM_File',"$proname/nohist_chatroom.db",
- &GDBM_READER(),0640)) {
- @entries=map { $_.':'.$hash{$_} } sort keys %hash;
- untie %hash;
+ my $hashref = &tie_user_hash($cdom, $cname, 'nohist_chatroom',
+ &GDBM_READER());
+ if ($hashref) {
+ @entries=map { $_.':'.$hashref->{$_} } sort(keys(%$hashref));
+ &untie_user_hash($hashref);
}
my @participants=();
my $cutoff=time-60;
- if (tie(%hash,'GDBM_File',"$proname/nohist_inchatroom.db",
- &GDBM_WRCREAT(),0640)) {
- $hash{$uname.':'.$udom}=time;
- foreach (sort keys %hash) {
- if ($hash{$_}>$cutoff) {
- $participants[$#participants+1]='active_participant:'.$_;
+ $hashref = &tie_user_hash($cdom, $cname, 'nohist_inchatroom',
+ &GDBM_WRCREAT());
+ if ($hashref) {
+ $hashref->{$uname.':'.$udom}=time;
+ foreach my $user (sort(keys(%$hashref))) {
+ if ($hashref->{$user}>$cutoff) {
+ push(@participants, 'active_participant:'.$user);
}
}
- untie %hash;
+ &untie_user_hash($hashref);
}
return (@participants,@entries);
}
-sub chatadd {
+sub chat_add {
my ($cdom,$cname,$newchat)=@_;
- my %hash;
- my $proname=&propath($cdom,$cname);
my @entries=();
my $time=time;
- if (tie(%hash,'GDBM_File',"$proname/nohist_chatroom.db",
- &GDBM_WRCREAT(),0640)) {
- @entries=map { $_.':'.$hash{$_} } sort keys %hash;
+ my $hashref = &tie_user_hash($cdom, $cname, 'nohist_chatroom',
+ &GDBM_WRCREAT());
+ if ($hashref) {
+ @entries=map { $_.':'.$hashref->{$_} } sort(keys(%$hashref));
my ($lastid)=($entries[$#entries]=~/^(\w+)\:/);
my ($thentime,$idnum)=split(/\_/,$lastid);
my $newid=$time.'_000000';
@@ -2980,38 +5810,58 @@ sub chatadd {
$idnum=substr('000000'.$idnum,-6,6);
$newid=$time.'_'.$idnum;
}
- $hash{$newid}=$newchat;
+ $hashref->{$newid}=$newchat;
my $expired=$time-3600;
- foreach (keys %hash) {
- my ($thistime)=($_=~/(\d+)\_/);
+ foreach my $comment (keys(%$hashref)) {
+ my ($thistime) = ($comment=~/(\d+)\_/);
if ($thistime<$expired) {
- delete $hash{$_};
+ delete $hashref->{$comment};
}
}
- untie %hash;
- }
- {
- my $hfh;
- if ($hfh=IO::File->new(">>$proname/chatroom.log")) {
- print $hfh "$time:".&unescape($newchat)."\n";
+ {
+ my $proname=&propath($cdom,$cname);
+ if (open(CHATLOG,">>$proname/chatroom.log")) {
+ print CHATLOG ("$time:".&unescape($newchat)."\n");
+ }
+ close(CHATLOG);
}
+ &untie_user_hash($hashref);
}
}
sub unsub {
my ($fname,$clientip)=@_;
my $result;
+ my $unsubs = 0; # Number of successful unsubscribes:
+
+
+ # An old way subscriptions were handled was to have a
+ # subscription marker file:
+
+ Debug("Attempting unlink of $fname.$clientname");
if (unlink("$fname.$clientname")) {
- $result="ok\n";
- } else {
- $result="not_subscribed\n";
- }
+ $unsubs++; # Successful unsub via marker file.
+ }
+
+ # The more modern way to do it is to have a subscription list
+ # file:
+
if (-e "$fname.subscription") {
my $found=&addline($fname,$clientname,$clientip,'');
- if ($found) { $result="ok\n"; }
+ if ($found) {
+ $unsubs++;
+ }
+ }
+
+ # If either or both of these mechanisms succeeded in unsubscribing a
+ # resource we can return ok:
+
+ if($unsubs) {
+ $result = "ok\n";
} else {
- if ($result != "ok\n") { $result="not_subscribed\n"; }
+ $result = "not_subscribed\n";
}
+
return $result;
}
@@ -3064,7 +5914,7 @@ sub thisversion {
sub subscribe {
my ($userinput,$clientip)=@_;
my $result;
- my ($cmd,$fname)=split(/:/,$userinput);
+ my ($cmd,$fname)=split(/:/,$userinput,2);
my $ownership=&ishome($fname);
if ($ownership eq 'owner') {
# explitly asking for the current version?
@@ -3108,6 +5958,35 @@ sub subscribe {
}
return $result;
}
+# Change the passwd of a unix user. The caller must have
+# first verified that the user is a loncapa user.
+#
+# Parameters:
+# user - Unix user name to change.
+# pass - New password for the user.
+# Returns:
+# ok - if success
+# other - Some meaningfule error message string.
+# NOTE:
+# invokes a setuid script to change the passwd.
+sub change_unix_password {
+ my ($user, $pass) = @_;
+
+ &Debug("change_unix_password");
+ my $execdir=$perlvar{'lonDaemons'};
+ &Debug("Opening lcpasswd pipeline");
+ my $pf = IO::File->new("|$execdir/lcpasswd > "
+ ."$perlvar{'lonDaemons'}"
+ ."/logs/lcpasswd.log");
+ print $pf "$user\n$pass\n$pass\n";
+ close $pf;
+ my $err = $?;
+ return ($err < @passwderrors) ? $passwderrors[$err] :
+ "pwchange_falure - unknown error";
+
+
+}
+
sub make_passwd_file {
my ($uname, $umode,$npass,$passfilename)=@_;
@@ -3115,7 +5994,11 @@ sub make_passwd_file {
if ($umode eq 'krb4' or $umode eq 'krb5') {
{
my $pf = IO::File->new(">$passfilename");
- print $pf "$umode:$npass\n";
+ if ($pf) {
+ print $pf "$umode:$npass\n";
+ } else {
+ $result = "pass_file_failed_error";
+ }
}
} elsif ($umode eq 'internal') {
my $salt=time;
@@ -3124,16 +6007,36 @@ sub make_passwd_file {
{
&Debug("Creating internal auth");
my $pf = IO::File->new(">$passfilename");
- print $pf "internal:$ncpass\n";
+ if($pf) {
+ print $pf "internal:$ncpass\n";
+ } else {
+ $result = "pass_file_failed_error";
+ }
}
} elsif ($umode eq 'localauth') {
{
my $pf = IO::File->new(">$passfilename");
- print $pf "localauth:$npass\n";
+ if($pf) {
+ print $pf "localauth:$npass\n";
+ } else {
+ $result = "pass_file_failed_error";
+ }
}
} elsif ($umode eq 'unix') {
{
- my $execpath="$perlvar{'lonDaemons'}/"."lcuseradd";
+ #
+ # Don't allow the creation of privileged accounts!!! that would
+ # be real bad!!!
+ #
+ my $uid = getpwnam($uname);
+ if((defined $uid) && ($uid == 0)) {
+ &logthis(">>>Attempted to create privilged account blocked");
+ return "no_priv_account_error\n";
+ }
+
+ my $execpath ="$perlvar{'lonDaemons'}/"."lcuseradd";
+
+ my $lc_error_file = $execdir."/tmp/lcuseradd".$$.".status";
{
&Debug("Executing external: ".$execpath);
&Debug("user = ".$uname.", Password =". $npass);
@@ -3141,18 +6044,42 @@ sub make_passwd_file {
print $se "$uname\n";
print $se "$npass\n";
print $se "$npass\n";
+ print $se "$lc_error_file\n"; # Status -> unique file.
}
- my $useraddok = $?;
- if($useraddok > 0) {
- &logthis("Failed lcuseradd: ".&lcuseraddstrerror($useraddok));
+ if (-r $lc_error_file) {
+ &Debug("Opening error file: $lc_error_file");
+ my $error = IO::File->new("< $lc_error_file");
+ my $useraddok = <$error>;
+ $error->close;
+ unlink($lc_error_file);
+
+ chomp $useraddok;
+
+ if($useraddok > 0) {
+ my $error_text = &lcuseraddstrerror($useraddok);
+ &logthis("Failed lcuseradd: $error_text");
+ $result = "lcuseradd_failed:$error_text\n";
+ } else {
+ my $pf = IO::File->new(">$passfilename");
+ if($pf) {
+ print $pf "unix:\n";
+ } else {
+ $result = "pass_file_failed_error";
+ }
+ }
+ } else {
+ &Debug("Could not locate lcuseradd error: $lc_error_file");
+ $result="bug_lcuseradd_no_output_file";
}
- my $pf = IO::File->new(">$passfilename");
- print $pf "unix:\n";
}
} elsif ($umode eq 'none') {
{
- my $pf = IO::File->new(">$passfilename");
- print $pf "none:\n";
+ my $pf = IO::File->new("> $passfilename");
+ if($pf) {
+ print $pf "none:\n";
+ } else {
+ $result = "pass_file_failed_error";
+ }
}
} else {
$result="auth_mode_error\n";
@@ -3160,12 +6087,17 @@ sub make_passwd_file {
return $result;
}
+sub convert_photo {
+ my ($start,$dest)=@_;
+ system("convert $start $dest");
+}
+
sub sethost {
my ($remotereq) = @_;
my (undef,$hostid)=split(/:/,$remotereq);
if (!defined($hostid)) { $hostid=$perlvar{'lonHostID'}; }
if ($hostip{$perlvar{'lonHostID'}} eq $hostip{$hostid}) {
- $currenthostid=$hostid;
+ $currenthostid =$hostid;
$currentdomainid=$hostdom{$hostid};
&logthis("Setting hostid to $hostid, and domain to $currentdomainid");
} else {
@@ -3205,6 +6137,74 @@ sub userload {
return $userloadpercent;
}
+# Routines for serializing arrays and hashes (copies from lonnet)
+
+sub array2str {
+ my (@array) = @_;
+ my $result=&arrayref2str(\@array);
+ $result=~s/^__ARRAY_REF__//;
+ $result=~s/__END_ARRAY_REF__$//;
+ return $result;
+}
+
+sub arrayref2str {
+ my ($arrayref) = @_;
+ my $result='__ARRAY_REF__';
+ foreach my $elem (@$arrayref) {
+ if(ref($elem) eq 'ARRAY') {
+ $result.=&arrayref2str($elem).'&';
+ } elsif(ref($elem) eq 'HASH') {
+ $result.=&hashref2str($elem).'&';
+ } elsif(ref($elem)) {
+ #print("Got a ref of ".(ref($elem))." skipping.");
+ } else {
+ $result.=&escape($elem).'&';
+ }
+ }
+ $result=~s/\&$//;
+ $result .= '__END_ARRAY_REF__';
+ return $result;
+}
+
+sub hash2str {
+ my (%hash) = @_;
+ my $result=&hashref2str(\%hash);
+ $result=~s/^__HASH_REF__//;
+ $result=~s/__END_HASH_REF__$//;
+ return $result;
+}
+
+sub hashref2str {
+ my ($hashref)=@_;
+ my $result='__HASH_REF__';
+ foreach (sort(keys(%$hashref))) {
+ if (ref($_) eq 'ARRAY') {
+ $result.=&arrayref2str($_).'=';
+ } elsif (ref($_) eq 'HASH') {
+ $result.=&hashref2str($_).'=';
+ } elsif (ref($_)) {
+ $result.='=';
+ #print("Got a ref of ".(ref($_))." skipping.");
+ } else {
+ if ($_) {$result.=&escape($_).'=';} else { last; }
+ }
+
+ if(ref($hashref->{$_}) eq 'ARRAY') {
+ $result.=&arrayref2str($hashref->{$_}).'&';
+ } elsif(ref($hashref->{$_}) eq 'HASH') {
+ $result.=&hashref2str($hashref->{$_}).'&';
+ } elsif(ref($hashref->{$_})) {
+ $result.='&';
+ #print("Got a ref of ".(ref($hashref->{$_}))." skipping.");
+ } else {
+ $result.=&escape($hashref->{$_}).'&';
+ }
+ }
+ $result=~s/\&$//;
+ $result .= '__END_HASH_REF__';
+ return $result;
+}
+
# ----------------------------------- POD (plain old documentation, CPAN style)
=head1 NAME
@@ -3412,7 +6412,7 @@ Place in B
stores hash in namespace
-=item rolesput
+=item rolesputy
put a role into a user's environment