--- loncom/lond 2004/04/19 11:28:18 1.178.2.17 +++ loncom/lond 2004/08/10 11:30:24 1.226 @@ -2,7 +2,7 @@ # The LearningOnline Network # lond "LON Daemon" Server (port "LOND" 5663) # -# $Id: lond,v 1.178.2.17 2004/04/19 11:28:18 foxr Exp $ +# $Id: lond,v 1.226 2004/08/10 11:30:24 foxr Exp $ # # Copyright Michigan State University Board of Trustees # @@ -20,7 +20,7 @@ # # You should have received a copy of the GNU General Public License # along with LON-CAPA; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # # /home/httpd/html/adm/gpl.txt # @@ -45,28 +45,35 @@ use Authen::Krb4; use Authen::Krb5; use lib '/home/httpd/lib/perl/'; use localauth; +use localenroll; use File::Copy; use LONCAPA::ConfigFileEdit; +use LONCAPA::lonlocal; +use LONCAPA::lonssl; +use Fcntl qw(:flock); -my $DEBUG = 1; # Non zero to enable debug log entries. +my $DEBUG = 0; # Non zero to enable debug log entries. my $status=''; my $lastlog=''; -my $VERSION='$Revision: 1.178.2.17 $'; #' stupid emacs +my $VERSION='$Revision: 1.226 $'; #' stupid emacs my $remoteVERSION; -my $currenthostid; +my $currenthostid="default"; my $currentdomainid; my $client; -my $clientip; -my $clientname; - -my $cipher; # Cipher key negotiated with client. -my $tmpsnum = 0;; # Id of tmpputs. +my $clientip; # IP address of client. +my $clientdns; # DNS name of client. +my $clientname; # LonCAPA name of client. my $server; -my $thisserver; +my $thisserver; # DNS of us. + +my $keymode; + +my $cipher; # Cipher key negotiated with client +my $tmpsnum = 0; # Id of tmpputs. # # Connection type is: @@ -77,9 +84,10 @@ my $thisserver; my $ConnectionType; -my %hostid; -my %hostdom; -my %hostip; +my %hostid; # ID's for hosts in cluster by ip. +my %hostdom; # LonCAPA domain for hosts in cluster. +my %hostip; # IPs for hosts in cluster. +my %hostdns; # ID's of hosts looked up by DNS name. my %managers; # Ip -> manager names @@ -98,6 +106,7 @@ my $CLIENT_OK = 1; my $MANAGER_OK = 2; my %Dispatcher; + # # The array below are password error strings." # @@ -113,8 +122,10 @@ my @passwderrors = ("ok", "lcpasswd Cannot set new passwd.", "lcpasswd Username has invalid characters", "lcpasswd Invalid characters in password", - "11", "12", - "lcpasswd Password mismatch"); + "lcpasswd User already exists", + "lcpasswd Something went wrong with user addition.", + "lcpasswd Password mismatch", + "lcpasswd Error filename is invalid"); # The array below are lcuseradd error strings.: @@ -135,11 +146,13 @@ my @adderrors = ("ok", "lcuseradd Could not add user.", "lcuseradd Password mismatch"); + + # # Statistics that are maintained and dislayed in the status line. # -my $Transactions; # Number of attempted transactions. -my $Failures; # Number of transcations failed. +my $Transactions = 0; # Number of attempted transactions. +my $Failures = 0; # Number of transcations failed. # ResetStatistics: # Resets the statistics counters: @@ -149,6 +162,193 @@ sub ResetStatistics { $Failures = 0; } +#------------------------------------------------------------------------ +# +# LocalConnection +# Completes the formation of a locally authenticated connection. +# This function will ensure that the 'remote' client is really the +# local host. If not, the connection is closed, and the function fails. +# If so, initcmd is parsed for the name of a file containing the +# IDEA session key. The fie is opened, read, deleted and the session +# key returned to the caller. +# +# Parameters: +# $Socket - Socket open on client. +# $initcmd - The full text of the init command. +# +# Implicit inputs: +# $clientdns - The DNS name of the remote client. +# $thisserver - Our DNS name. +# +# Returns: +# IDEA session key on success. +# undef on failure. +# +sub LocalConnection { + my ($Socket, $initcmd) = @_; + Debug("Attempting local connection: $initcmd client: $clientdns me: $thisserver"); + if($clientdns ne $thisserver) { + &logthis(' LocalConnection rejecting non local: ' + ."$clientdns ne $thisserver "); + close $Socket; + return undef; + } else { + chomp($initcmd); # Get rid of \n in filename. + my ($init, $type, $name) = split(/:/, $initcmd); + Debug(" Init command: $init $type $name "); + + # Require that $init = init, and $type = local: Otherwise + # the caller is insane: + + if(($init ne "init") && ($type ne "local")) { + &logthis(' LocalConnection: caller is insane! ' + ."init = $init, and type = $type "); + close($Socket);; + return undef; + + } + # Now get the key filename: + + my $IDEAKey = lonlocal::ReadKeyFile($name); + return $IDEAKey; + } +} +#------------------------------------------------------------------------------ +# +# SSLConnection +# Completes the formation of an ssh authenticated connection. The +# socket is promoted to an ssl socket. If this promotion and the associated +# certificate exchange are successful, the IDEA key is generated and sent +# to the remote peer via the SSL tunnel. The IDEA key is also returned to +# the caller after the SSL tunnel is torn down. +# +# Parameters: +# Name Type Purpose +# $Socket IO::Socket::INET Plaintext socket. +# +# Returns: +# IDEA key on success. +# undef on failure. +# +sub SSLConnection { + my $Socket = shift; + + Debug("SSLConnection: "); + my $KeyFile = lonssl::KeyFile(); + if(!$KeyFile) { + my $err = lonssl::LastError(); + &logthis(" CRITICAL" + ."Can't get key file $err "); + return undef; + } + my ($CACertificate, + $Certificate) = lonssl::CertificateFile(); + + + # If any of the key, certificate or certificate authority + # certificate filenames are not defined, this can't work. + + if((!$Certificate) || (!$CACertificate)) { + my $err = lonssl::LastError(); + &logthis(" CRITICAL" + ."Can't get certificates: $err "); + + return undef; + } + Debug("Key: $KeyFile CA: $CACertificate Cert: $Certificate"); + + # Indicate to our peer that we can procede with + # a transition to ssl authentication: + + print $Socket "ok:ssl\n"; + + Debug("Approving promotion -> ssl"); + # And do so: + + my $SSLSocket = lonssl::PromoteServerSocket($Socket, + $CACertificate, + $Certificate, + $KeyFile); + if(! ($SSLSocket) ) { # SSL socket promotion failed. + my $err = lonssl::LastError(); + &logthis(" CRITICAL " + ."SSL Socket promotion failed: $err "); + return undef; + } + Debug("SSL Promotion successful"); + + # + # The only thing we'll use the socket for is to send the IDEA key + # to the peer: + + my $Key = lonlocal::CreateCipherKey(); + print $SSLSocket "$Key\n"; + + lonssl::Close($SSLSocket); + + Debug("Key exchange complete: $Key"); + + return $Key; +} +# +# InsecureConnection: +# If insecure connections are allowd, +# exchange a challenge with the client to 'validate' the +# client (not really, but that's the protocol): +# We produce a challenge string that's sent to the client. +# The client must then echo the challenge verbatim to us. +# +# Parameter: +# Socket - Socket open on the client. +# Returns: +# 1 - success. +# 0 - failure (e.g.mismatch or insecure not allowed). +# +sub InsecureConnection { + my $Socket = shift; + + # Don't even start if insecure connections are not allowed. + + if(! $perlvar{londAllowInsecure}) { # Insecure connections not allowed. + return 0; + } + + # Fabricate a challenge string and send it.. + + my $challenge = "$$".time; # pid + time. + print $Socket "$challenge\n"; + &status("Waiting for challenge reply"); + + my $answer = <$Socket>; + $answer =~s/\W//g; + if($challenge eq $answer) { + return 1; + } else { + logthis("WARNING client did not respond to challenge"); + &status("No challenge reqply"); + return 0; + } + + +} + +# +# GetCertificate: Given a transaction that requires a certificate, +# this function will extract the certificate from the transaction +# request. Note that at this point, the only concept of a certificate +# is the hostname to which we are connected. +# +# Parameter: +# request - The request sent by our client (this parameterization may +# need to change when we really use a certificate granting +# authority. +# +sub GetCertificate { + my $request = shift; + + return $clientip; +} + # # Return true if client is a manager. # @@ -161,6 +361,580 @@ sub isManager { sub isClient { return (($ConnectionType eq "client") || ($ConnectionType eq "both")); } + + +# +# ReadManagerTable: Reads in the current manager table. For now this is +# done on each manager authentication because: +# - These authentications are not frequent +# - This allows dynamic changes to the manager table +# without the need to signal to the lond. +# +sub ReadManagerTable { + + # Clean out the old table first.. + + foreach my $key (keys %managers) { + delete $managers{$key}; + } + + my $tablename = $perlvar{'lonTabDir'}."/managers.tab"; + if (!open (MANAGERS, $tablename)) { + logthis('No manager table. Nobody can manage!!'); + return; + } + while(my $host = ) { + chomp($host); + if ($host =~ "^#") { # Comment line. + next; + } + if (!defined $hostip{$host}) { # This is a non cluster member + # The entry is of the form: + # cluname:hostname + # cluname - A 'cluster hostname' is needed in order to negotiate + # the host key. + # hostname- The dns name of the host. + # + my($cluname, $dnsname) = split(/:/, $host); + + my $ip = gethostbyname($dnsname); + if(defined($ip)) { # bad names don't deserve entry. + my $hostip = inet_ntoa($ip); + $managers{$hostip} = $cluname; + logthis(' registering manager '. + "$dnsname as $cluname with $hostip \n"); + } + } else { + logthis(' existing host'." $host\n"); + $managers{$hostip{$host}} = $host; # Use info from cluster tab if clumemeber + } + } +} + +# +# ValidManager: Determines if a given certificate represents a valid manager. +# in this primitive implementation, the 'certificate' is +# just the connecting loncapa client name. This is checked +# against a valid client list in the configuration. +# +# +sub ValidManager { + my $certificate = shift; + + return isManager; +} +# +# CopyFile: Called as part of the process of installing a +# new configuration file. This function copies an existing +# file to a backup file. +# Parameters: +# oldfile - Name of the file to backup. +# newfile - Name of the backup file. +# Return: +# 0 - Failure (errno has failure reason). +# 1 - Success. +# +sub CopyFile { + + my ($oldfile, $newfile) = @_; + + # The file must exist: + + if(-e $oldfile) { + + # Read the old file. + + my $oldfh = IO::File->new("< $oldfile"); + if(!$oldfh) { + return 0; + } + my @contents = <$oldfh>; # Suck in the entire file. + + # write the backup file: + + my $newfh = IO::File->new("> $newfile"); + if(!(defined $newfh)){ + return 0; + } + my $lines = scalar @contents; + for (my $i =0; $i < $lines; $i++) { + print $newfh ($contents[$i]); + } + + $oldfh->close; + $newfh->close; + + chmod(0660, $newfile); + + return 1; + + } else { + return 0; + } +} +# +# Host files are passed out with externally visible host IPs. +# If, for example, we are behind a fire-wall or NAT host, our +# internally visible IP may be different than the externally +# visible IP. Therefore, we always adjust the contents of the +# host file so that the entry for ME is the IP that we believe +# we have. At present, this is defined as the entry that +# DNS has for us. If by some chance we are not able to get a +# DNS translation for us, then we assume that the host.tab file +# is correct. +# BUGBUGBUG - in the future, we really should see if we can +# easily query the interface(s) instead. +# Parameter(s): +# contents - The contents of the host.tab to check. +# Returns: +# newcontents - The adjusted contents. +# +# +sub AdjustHostContents { + my $contents = shift; + my $adjusted; + my $me = $perlvar{'lonHostID'}; + + foreach my $line (split(/\n/,$contents)) { + if(!(($line eq "") || ($line =~ /^ *\#/) || ($line =~ /^ *$/))) { + chomp($line); + my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon)=split(/:/,$line); + if ($id eq $me) { + my $ip = gethostbyname($name); + my $ipnew = inet_ntoa($ip); + $ip = $ipnew; + # Reconstruct the host line and append to adjusted: + + my $newline = "$id:$domain:$role:$name:$ip"; + if($maxcon ne "") { # Not all hosts have loncnew tuning params + $newline .= ":$maxcon:$idleto:$mincon"; + } + $adjusted .= $newline."\n"; + + } else { # Not me, pass unmodified. + $adjusted .= $line."\n"; + } + } else { # Blank or comment never re-written. + $adjusted .= $line."\n"; # Pass blanks and comments as is. + } + } + return $adjusted; +} +# +# InstallFile: Called to install an administrative file: +# - The file is created with .tmp +# - The .tmp file is then mv'd to +# This lugubrious procedure is done to ensure that we are never without +# a valid, even if dated, version of the file regardless of who crashes +# and when the crash occurs. +# +# Parameters: +# Name of the file +# File Contents. +# Return: +# nonzero - success. +# 0 - failure and $! has an errno. +# +sub InstallFile { + + my ($Filename, $Contents) = @_; + my $TempFile = $Filename.".tmp"; + + # Open the file for write: + + my $fh = IO::File->new("> $TempFile"); # Write to temp. + if(!(defined $fh)) { + &logthis(' Unable to create '.$TempFile.""); + return 0; + } + # write the contents of the file: + + print $fh ($Contents); + $fh->close; # In case we ever have a filesystem w. locking + + chmod(0660, $TempFile); + + # Now we can move install the file in position. + + move($TempFile, $Filename); + + return 1; +} + + +# +# ConfigFileFromSelector: converts a configuration file selector +# (one of host or domain at this point) into a +# configuration file pathname. +# +# Parameters: +# selector - Configuration file selector. +# Returns: +# Full path to the file or undef if the selector is invalid. +# +sub ConfigFileFromSelector { + my $selector = shift; + my $tablefile; + + my $tabledir = $perlvar{'lonTabDir'}.'/'; + if ($selector eq "hosts") { + $tablefile = $tabledir."hosts.tab"; + } elsif ($selector eq "domain") { + $tablefile = $tabledir."domain.tab"; + } else { + return undef; + } + return $tablefile; + +} +# +# PushFile: Called to do an administrative push of a file. +# - Ensure the file being pushed is one we support. +# - Backup the old file to +# - Separate the contents of the new file out from the +# rest of the request. +# - Write the new file. +# Parameter: +# Request - The entire user request. This consists of a : separated +# string pushfile:tablename:contents. +# NOTE: The contents may have :'s in it as well making things a bit +# more interesting... but not much. +# Returns: +# String to send to client ("ok" or "refused" if bad file). +# +sub PushFile { + my $request = shift; + my ($command, $filename, $contents) = split(":", $request, 3); + + # At this point in time, pushes for only the following tables are + # supported: + # hosts.tab ($filename eq host). + # domain.tab ($filename eq domain). + # Construct the destination filename or reject the request. + # + # lonManage is supposed to ensure this, however this session could be + # part of some elaborate spoof that managed somehow to authenticate. + # + + + my $tablefile = ConfigFileFromSelector($filename); + if(! (defined $tablefile)) { + return "refused"; + } + # + # >copy< the old table to the backup table + # don't rename in case system crashes/reboots etc. in the time + # window between a rename and write. + # + my $backupfile = $tablefile; + $backupfile =~ s/\.tab$/.old/; + if(!CopyFile($tablefile, $backupfile)) { + &logthis(' CopyFile from '.$tablefile." to ".$backupfile." failed "); + return "error:$!"; + } + &logthis(' Pushfile: backed up ' + .$tablefile." to $backupfile"); + + # If the file being pushed is the host file, we adjust the entry for ourself so that the + # IP will be our current IP as looked up in dns. Note this is only 99% good as it's possible + # to conceive of conditions where we don't have a DNS entry locally. This is possible in a + # network sense but it doesn't make much sense in a LonCAPA sense so we ignore (for now) + # that possibilty. + + if($filename eq "host") { + $contents = AdjustHostContents($contents); + } + + # Install the new file: + + if(!InstallFile($tablefile, $contents)) { + &logthis(' Pushfile: unable to install ' + .$tablefile." $! "); + return "error:$!"; + } else { + &logthis(' Installed new '.$tablefile + .""); + + } + + + # Indicate success: + + return "ok"; + +} + +# +# Called to re-init either lonc or lond. +# +# Parameters: +# request - The full request by the client. This is of the form +# reinit: +# where is allowed to be either of +# lonc or lond +# +# Returns: +# The string to be sent back to the client either: +# ok - Everything worked just fine. +# error:why - There was a failure and why describes the reason. +# +# +sub ReinitProcess { + my $request = shift; + + + # separate the request (reinit) from the process identifier and + # validate it producing the name of the .pid file for the process. + # + # + my ($junk, $process) = split(":", $request); + my $processpidfile = $perlvar{'lonDaemons'}.'/logs/'; + if($process eq 'lonc') { + $processpidfile = $processpidfile."lonc.pid"; + if (!open(PIDFILE, "< $processpidfile")) { + return "error:Open failed for $processpidfile"; + } + my $loncpid = ; + close(PIDFILE); + logthis(' Reinitializing lonc pid='.$loncpid + .""); + kill("USR2", $loncpid); + } elsif ($process eq 'lond') { + logthis(' Reinitializing self (lond) '); + &UpdateHosts; # Lond is us!! + } else { + &logthis('"); + return "error:Invalid process identifier $process"; + } + return 'ok'; +} +# Validate a line in a configuration file edit script: +# Validation includes: +# - Ensuring the command is valid. +# - Ensuring the command has sufficient parameters +# Parameters: +# scriptline - A line to validate (\n has been stripped for what it's worth). +# +# Return: +# 0 - Invalid scriptline. +# 1 - Valid scriptline +# NOTE: +# Only the command syntax is checked, not the executability of the +# command. +# +sub isValidEditCommand { + my $scriptline = shift; + + # Line elements are pipe separated: + + my ($command, $key, $newline) = split(/\|/, $scriptline); + &logthis(' isValideditCommand checking: '. + "Command = '$command', Key = '$key', Newline = '$newline' \n"); + + if ($command eq "delete") { + # + # key with no newline. + # + if( ($key eq "") || ($newline ne "")) { + return 0; # Must have key but no newline. + } else { + return 1; # Valid syntax. + } + } elsif ($command eq "replace") { + # + # key and newline: + # + if (($key eq "") || ($newline eq "")) { + return 0; + } else { + return 1; + } + } elsif ($command eq "append") { + if (($key ne "") && ($newline eq "")) { + return 1; + } else { + return 0; + } + } else { + return 0; # Invalid command. + } + return 0; # Should not get here!!! +} +# +# ApplyEdit - Applies an edit command to a line in a configuration +# file. It is the caller's responsiblity to validate the +# edit line. +# Parameters: +# $directive - A single edit directive to apply. +# Edit directives are of the form: +# append|newline - Appends a new line to the file. +# replace|key|newline - Replaces the line with key value 'key' +# delete|key - Deletes the line with key value 'key'. +# $editor - A config file editor object that contains the +# file being edited. +# +sub ApplyEdit { + + my ($directive, $editor) = @_; + + # Break the directive down into its command and its parameters + # (at most two at this point. The meaning of the parameters, if in fact + # they exist depends on the command). + + my ($command, $p1, $p2) = split(/\|/, $directive); + + if($command eq "append") { + $editor->Append($p1); # p1 - key p2 null. + } elsif ($command eq "replace") { + $editor->ReplaceLine($p1, $p2); # p1 - key p2 = newline. + } elsif ($command eq "delete") { + $editor->DeleteLine($p1); # p1 - key p2 null. + } else { # Should not get here!!! + die "Invalid command given to ApplyEdit $command" + } +} +# +# AdjustOurHost: +# Adjusts a host file stored in a configuration file editor object +# for the true IP address of this host. This is necessary for hosts +# that live behind a firewall. +# Those hosts have a publicly distributed IP of the firewall, but +# internally must use their actual IP. We assume that a given +# host only has a single IP interface for now. +# Formal Parameters: +# editor - The configuration file editor to adjust. This +# editor is assumed to contain a hosts.tab file. +# Strategy: +# - Figure out our hostname. +# - Lookup the entry for this host. +# - Modify the line to contain our IP +# - Do a replace for this host. +sub AdjustOurHost { + my $editor = shift; + + # figure out who I am. + + my $myHostName = $perlvar{'lonHostID'}; # LonCAPA hostname. + + # Get my host file entry. + + my $ConfigLine = $editor->Find($myHostName); + if(! (defined $ConfigLine)) { + die "AdjustOurHost - no entry for me in hosts file $myHostName"; + } + # figure out my IP: + # Use the config line to get my hostname. + # Use gethostbyname to translate that into an IP address. + # + my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon) = split(/:/,$ConfigLine); + my $BinaryIp = gethostbyname($name); + my $ip = inet_ntoa($ip); + # + # Reassemble the config line from the elements in the list. + # Note that if the loncnew items were not present before, they will + # be now even if they would be empty + # + my $newConfigLine = $id; + foreach my $item ($domain, $role, $name, $ip, $maxcon, $idleto, $mincon) { + $newConfigLine .= ":".$item; + } + # Replace the line: + + $editor->ReplaceLine($id, $newConfigLine); + +} +# +# ReplaceConfigFile: +# Replaces a configuration file with the contents of a +# configuration file editor object. +# This is done by: +# - Copying the target file to .old +# - Writing the new file to .tmp +# - Moving -> +# This laborious process ensures that the system is never without +# a configuration file that's at least valid (even if the contents +# may be dated). +# Parameters: +# filename - Name of the file to modify... this is a full path. +# editor - Editor containing the file. +# +sub ReplaceConfigFile { + + my ($filename, $editor) = @_; + + CopyFile ($filename, $filename.".old"); + + my $contents = $editor->Get(); # Get the contents of the file. + + InstallFile($filename, $contents); +} +# +# +# Called to edit a configuration table file +# Parameters: +# request - The entire command/request sent by lonc or lonManage +# Return: +# The reply to send to the client. +# +sub EditFile { + my $request = shift; + + # Split the command into it's pieces: edit:filetype:script + + my ($request, $filetype, $script) = split(/:/, $request,3); # : in script + + # Check the pre-coditions for success: + + if($request != "edit") { # Something is amiss afoot alack. + return "error:edit request detected, but request != 'edit'\n"; + } + if( ($filetype ne "hosts") && + ($filetype ne "domain")) { + return "error:edit requested with invalid file specifier: $filetype \n"; + } + + # Split the edit script and check it's validity. + + my @scriptlines = split(/\n/, $script); # one line per element. + my $linecount = scalar(@scriptlines); + for(my $i = 0; $i < $linecount; $i++) { + chomp($scriptlines[$i]); + if(!isValidEditCommand($scriptlines[$i])) { + return "error:edit with bad script line: '$scriptlines[$i]' \n"; + } + } + + # Execute the edit operation. + # - Create a config file editor for the appropriate file and + # - execute each command in the script: + # + my $configfile = ConfigFileFromSelector($filetype); + if (!(defined $configfile)) { + return "refused\n"; + } + my $editor = ConfigFileEdit->new($configfile); + + for (my $i = 0; $i < $linecount; $i++) { + ApplyEdit($scriptlines[$i], $editor); + } + # If the file is the host file, ensure that our host is + # adjusted to have our ip: + # + if($filetype eq "host") { + AdjustOurHost($editor); + } + # Finally replace the current file with our file. + # + ReplaceConfigFile($configfile, $editor); + + return "ok\n"; +} + +#--------------------------------------------------------------- +# +# Manipulation of hash based databases (factoring out common code +# for later use as we refactor. # # Ties a domain level resource file to a hash. # If requested a history entry is created in the associated hist file. @@ -178,10 +952,8 @@ sub isClient { # Reference to a hash bound to the db file or alternatively undef # if the tie failed. # -sub TieDomainHash { - my $domain = shift; - my $namespace = shift; - my $how = shift; +sub tie_domain_hash { + my ($domain,$namespace,$how,$loghead,$logtail) = @_; # Filter out any whitespace in the domain name: @@ -189,22 +961,21 @@ sub TieDomainHash { # We have enough to go on to tie the hash: - my $UserTopDir = $perlvar{'lonUsersDir'}; - my $DomainDir = $UserTopDir."/$domain"; - my $ResourceFile = $DomainDir."/$namespace.db"; + my $user_top_dir = $perlvar{'lonUsersDir'}; + my $domain_dir = $user_top_dir."/$domain"; + my $resource_file = $domain_dir."/$namespace.db"; my %hash; - if(tie(%hash, 'GDBM_File', $ResourceFile, $how, 0640)) { - if (scalar @_) { # Need to log the operation. - my $logFh = IO::File->new(">>$DomainDir/$namespace.hist"); + if(tie(%hash, 'GDBM_File', $resource_file, $how, 0640)) { + if (defined($loghead)) { # Need to log the operation. + my $logFh = IO::File->new(">>$domain_dir/$namespace.hist"); if($logFh) { - my $TimeStamp = time; - my ($loghead, $logtail) = @_; - print $logFh "$loghead:$TimeStamp:$logtail\n"; + my $timestamp = time; + print $logFh "$loghead:$timestamp:$logtail\n"; } + $logFh->close; } return \%hash; # Return the tied hash. - } - else { + } else { return undef; # Tie failed. } } @@ -228,147 +999,45 @@ sub TieDomainHash { # hash to which the database is tied. It's up to the caller to untie. # undef if the has could not be tied. # -sub TieUserHash { - my $domain = shift; - my $user = shift; - my $namespace = shift; - my $how = shift; - +sub tie_user_hash { + my ($domain,$user,$namespace,$how,$loghead,$what) = @_; + $namespace=~s/\//\_/g; # / -> _ $namespace=~s/\W//g; # whitespace eliminated. my $proname = propath($domain, $user); - # If this is a namespace for which a history is kept, - # make the history log entry: - - - unless ($namespace =~/^nohist\_/ && (scalar @_ > 0)) { - my $hfh = IO::File->new(">>$proname/$namespace.hist"); - if($hfh) { - my $now = time; - my $loghead = shift; - my $what = shift; - print $hfh "$loghead:$now:$what\n"; - } - } # Tie the database. my %hash; if(tie(%hash, 'GDBM_File', "$proname/$namespace.db", $how, 0640)) { - return \%hash; - } - else { - return undef; - } - -} - -# -# Get a Request: -# Gets a Request message from the client. The transaction -# is defined as a 'line' of text. We remove the new line -# from the text line. -# -sub GetRequest { - my $input = <$client>; - chomp($input); - - Debug("Request = $input\n"); - - &status('Processing '.$clientname.':'.$input); - - return $input; -} -# -# Decipher encoded traffic -# Parameters: -# input - Encoded data. -# Returns: -# Decoded data or undef if encryption key was not yet negotiated. -# Implicit input: -# cipher - This global holds the negotiated encryption key. -# -sub Decipher { - my $input = shift; - my $output = ''; - - - if($cipher) { - my($enc, $enclength, $encinput) = split(/:/, $input); - for(my $encidx = 0; $encidx < length($encinput); $encidx += 16) { - $output .= - $cipher->decrypt(pack("H16", substr($encinput, $encidx, 16))); + # If this is a namespace for which a history is kept, + # make the history log entry: + if (($namespace =~/^nohist\_/) && (defined($loghead))) { + my $args = scalar @_; + Debug(" Opening history: $namespace $args"); + my $hfh = IO::File->new(">>$proname/$namespace.hist"); + if($hfh) { + my $now = time; + print $hfh "$loghead:$now:$what\n"; + } + $hfh->close; } - return substr($output, 0, $enclength); + return \%hash; } else { return undef; } -} - -# -# Register a command processor. This function is invoked to register a sub -# to process a request. Once registered, the ProcessRequest sub can automatically -# dispatch requests to an appropriate sub, and do the top level validity checking -# as well: -# - Is the keyword recognized. -# - Is the proper client type attempting the request. -# - Is the request encrypted if it has to be. -# Parameters: -# $RequestName - Name of the request being registered. -# This is the command request that will match -# against the hash keywords to lookup the information -# associated with the dispatch information. -# $Procedure - Reference to a sub to call to process the request. -# All subs get called as follows: -# Procedure($cmd, $tail, $replyfd, $key) -# $cmd - the actual keyword that invoked us. -# $tail - the tail of the request that invoked us. -# $replyfd- File descriptor connected to the client -# $MustEncode - True if the request must be encoded to be good. -# $ClientOk - True if it's ok for a client to request this. -# $ManagerOk - True if it's ok for a manager to request this. -# Side effects: -# - On success, the Dispatcher hash has an entry added for the key $RequestName -# - On failure, the program will die as it's a bad internal bug to try to -# register a duplicate command handler. -# -sub RegisterHandler { - my $RequestName = shift; - my $Procedure = shift; - my $MustEncode = shift; - my $ClientOk = shift; - my $ManagerOk = shift; - - # Don't allow duplication# - - if (defined $Dispatcher{$RequestName}) { - die "Attempting to define a duplicate request handler for $RequestName\n"; - } - # Build the client type mask: - my $ClientTypeMask = 0; - if($ClientOk) { - $ClientTypeMask |= $CLIENT_OK; - } - if($ManagerOk) { - $ClientTypeMask |= $MANAGER_OK; - } - - # Enter the hash: - - my @entry = ($Procedure, $MustEncode, $ClientTypeMask); - - $Dispatcher{$RequestName} = \@entry; - - } #--------------------- Request Handlers -------------------------------------------- # -# By convention each request handler registers itself prior to the sub declaration: +# By convention each request handler registers itself prior to the sub +# declaration: # +#++ +# # Handles ping requests. # Parameters: # $cmd - the actual keyword that invoked us. @@ -383,18 +1052,21 @@ sub RegisterHandler { # Side effects: # Reply information is sent to the client. -sub PingHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; +sub ping_handler { + my ($cmd, $tail, $client) = @_; + Debug("$cmd $tail $client .. $currenthostid:"); Reply( $client,"$currenthostid\n","$cmd:$tail"); return 1; } -RegisterHandler("ping", \&PingHandler, 0, 1, 1); # Ping unencoded, client or manager. +®ister_handler("ping", \&ping_handler, 0, 1, 1); # Ping unencoded, client or manager. + +#++ +# +# Handles pong requests. Pong replies with our current host id, and +# the results of a ping sent to us via our lonc. # -# Handles pong reequests: # Parameters: # $cmd - the actual keyword that invoked us. # $tail - the tail of the request that invoked us. @@ -408,21 +1080,24 @@ RegisterHandler("ping", \&PingHandler, 0 # Side effects: # Reply information is sent to the client. -sub PongHandler { - my $cmd = shift; - my $tail = shift; - my $replyfd = shift; +sub pong_handler { + my ($cmd, $tail, $replyfd) = @_; my $reply=&reply("ping",$clientname); - Reply( $replyfd, "$currenthostid:$reply\n", "$cmd:$tail"); + &Reply( $replyfd, "$currenthostid:$reply\n", "$cmd:$tail"); return 1; } -RegisterHandler("pong", \&PongHandler, 0, 1, 1); # Pong unencoded, client or manager +®ister_handler("pong", \&pong_handler, 0, 1, 1); # Pong unencoded, client or manager -# -# EstablishKeyHandler: +#++ # Called to establish an encrypted session key with the remote client. -# +# Note that with secure lond, in most cases this function is never +# invoked. Instead, the secure session key is established either +# via a local file that's locked down tight and only lives for a short +# time, or via an ssl tunnel...and is generated from a bunch-o-random +# bits from /dev/urandom, rather than the predictable pattern used by +# by this sub. This sub is only used in the old-style insecure +# key negotiation. # Parameters: # $cmd - the actual keyword that invoked us. # $tail - the tail of the request that invoked us. @@ -438,10 +1113,8 @@ RegisterHandler("pong", \&PongHandler, 0 # Reply information is sent to the client. # $cipher is set with a reference to a new IDEA encryption object. # -sub EstablishKeyHandler { - my $cmd = shift; - my $tail = shift; - my $replyfd = shift; +sub establish_key_handler { + my ($cmd, $tail, $replyfd) = @_; my $buildkey=time.$$.int(rand 100000); $buildkey=~tr/1-6/A-F/; @@ -454,14 +1127,14 @@ sub EstablishKeyHandler { $key=substr($key,0,32); my $cipherkey=pack("H32",$key); $cipher=new IDEA $cipherkey; - Reply($replyfd, "$buildkey\n", "$cmd:$tail"); + &Reply($replyfd, "$buildkey\n", "$cmd:$tail"); return 1; } -RegisterHandler("ekey", \&EstablishKeyHandler, 0, 1,1); +®ister_handler("ekey", \&establish_key_handler, 0, 1,1); + -# LoadHandler: # Handler for the load command. Returns the current system load average # to the requestor. # @@ -478,10 +1151,8 @@ RegisterHandler("ekey", \&EstablishKeyHa # 0 - Program should exit. # Side effects: # Reply information is sent to the client. -sub LoadHandler { - my $cmd = shift; - my $tail = shift; - my $replyfd = shift; +sub load_handler { + my ($cmd, $tail, $replyfd) = @_; # Get the load average from /proc/loadavg and calculate it as a percentage of # the allowed load limit as set by the perl global variable lonLoadLim @@ -494,12 +1165,11 @@ sub LoadHandler { my $loadpercent=100*$loadavg/$perlvar{'lonLoadLim'}; - Reply( $replyfd, "$loadpercent\n", "$cmd:$tail"); + &Reply( $replyfd, "$loadpercent\n", "$cmd:$tail"); return 1; } -RegisterHandler("load", \&LoadHandler, 0, 1, 0); - +register_handler("load", \&load_handler, 0, 1, 0); # # Process the userload request. This sub returns to the client the current @@ -521,17 +1191,15 @@ RegisterHandler("load", \&LoadHandler, 0 # Implicit outputs: # the reply is written to the client. # -sub UserLoadHandler { - my $cmd = shift; - my $tail = shift; - my $replyfd = shift; +sub user_load_handler { + my ($cmd, $tail, $replyfd) = @_; my $userloadpercent=&userload(); - Reply($replyfd, "$userloadpercent\n", "$cmd:$tail"); + &Reply($replyfd, "$userloadpercent\n", "$cmd:$tail"); return 1; } -RegisterHandler("userload", \&UserLoadHandler, 0, 1, 0); +register_handler("userload", \&user_load_handler, 0, 1, 0); # Process a request for the authorization type of a user: # (userauth). @@ -546,23 +1214,21 @@ RegisterHandler("userload", \&UserLoadHa # Implicit outputs: # The user authorization type is written to the client. # -sub UserAuthorizationType { - my $cmd = shift; - my $tail = shift; - my $replyfd = shift; +sub user_authorization_type { + my ($cmd, $tail, $replyfd) = @_; my $userinput = "$cmd:$tail"; # Pull the domain and username out of the command tail. - # and call GetAuthType to determine the authentication type. + # and call get_auth_type to determine the authentication type. my ($udom,$uname)=split(/:/,$tail); - my $result = GetAuthType($udom, $uname); + my $result = &get_auth_type($udom, $uname); if($result eq "nouser") { - Failure( $replyfd, "unknown_user\n", $userinput); + &Failure( $replyfd, "unknown_user\n", $userinput); } else { # - # We only want to pass the second field from GetAuthType + # We only want to pass the second field from get_auth_type # for ^krb.. otherwise we'll be handing out the encrypted # password for internals e.g. # @@ -570,13 +1236,13 @@ sub UserAuthorizationType { if($type =~ /^krb/) { $type = $result; } - Reply( $replyfd, "$type\n", $userinput); + &Reply( $replyfd, "$type:\n", $userinput); } return 1; } -RegisterHandler("currentauth", \&UserAuthorizationType, 1, 1, 0); -# +®ister_handler("currentauth", \&user_authorization_type, 1, 1, 0); + # Process a request by a manager to push a hosts or domain table # to us. We pick apart the command and pass it on to the subs # that already exist to do this. @@ -591,10 +1257,8 @@ RegisterHandler("currentauth", \&UserAut # Implicit Output: # a reply is written to the client. -sub PushFileHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; +sub push_file_handler { + my ($cmd, $tail, $client) = @_; my $userinput = "$cmd:$tail"; @@ -602,20 +1266,21 @@ sub PushFileHandler { # the code below is a hook to do further authentication (e.g. to resolve # spoofing). - my $cert = GetCertificate($userinput); - if(ValidManager($cert)) { + my $cert = &GetCertificate($userinput); + if(&ValidManager($cert)) { # Now presumably we have the bona fides of both the peer host and the # process making the request. - my $reply = PushFile($userinput); - Reply($client, "$reply\n", $userinput); + my $reply = &PushFile($userinput); + &Reply($client, "$reply\n", $userinput); } else { - Failure( $client, "refused\n", $userinput); + &Failure( $client, "refused\n", $userinput); } + return 1; } -RegisterHandler("pushfile", \&PushFileHandler, 1, 0, 1); +®ister_handler("pushfile", \&push_file_handler, 1, 0, 1); @@ -633,25 +1298,23 @@ RegisterHandler("pushfile", \&PushFileHa # Implicit output: # a reply is sent to the client. # -sub ReinitProcessHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; +sub reinit_process_handler { + my ($cmd, $tail, $client) = @_; my $userinput = "$cmd:$tail"; - my $cert = GetCertificate($userinput); - if(ValidManager($cert)) { + my $cert = &GetCertificate($userinput); + if(&ValidManager($cert)) { chomp($userinput); - my $reply = ReinitProcess($userinput); - Reply( $client, "$reply\n", $userinput); + my $reply = &ReinitProcess($userinput); + &Reply( $client, "$reply\n", $userinput); } else { - Failure( $client, "refused\n", $userinput); + &Failure( $client, "refused\n", $userinput); } return 1; } -RegisterHandler("reinit", \&ReinitProcessHandler, 1, 0, 1); +®ister_handler("reinit", \&reinit_process_handler, 1, 0, 1); # Process the editing script for a table edit operation. # the editing operation must be encrypted and requested by @@ -667,34 +1330,32 @@ RegisterHandler("reinit", \&ReinitProces # Implicit output: # a reply is sent to the client. # -sub EditTableHandler { - my $command = shift; - my $tail = shift; - my $client = shift; +sub edit_table_handler { + my ($command, $tail, $client) = @_; my $userinput = "$command:$tail"; - my $cert = GetCertificate($userinput); - if(ValidManager($cert)) { + my $cert = &GetCertificate($userinput); + if(&ValidManager($cert)) { my($filetype, $script) = split(/:/, $tail); if (($filetype eq "hosts") || ($filetype eq "domain")) { if($script ne "") { - Reply($client, # BUGBUG - EditFile - EditFile($userinput), # could fail. + &Reply($client, # BUGBUG - EditFile + &EditFile($userinput), # could fail. $userinput); } else { - Failure($client,"refused\n",$userinput); + &Failure($client,"refused\n",$userinput); } } else { - Failure($client,"refused\n",$userinput); + &Failure($client,"refused\n",$userinput); } } else { - Failure($client,"refused\n",$userinput); + &Failure($client,"refused\n",$userinput); } return 1; } -RegisterHandler("edit", \&EditTableHandler, 1, 0, 1); +register_handler("edit", \&edit_table_handler, 1, 0, 1); # @@ -721,10 +1382,9 @@ RegisterHandler("edit", \&EditTableHandl # The authentication systems describe above have their own forms of implicit # input into the authentication process that are described above. # -sub AuthenticateHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; +sub authenticate_handler { + my ($cmd, $tail, $client) = @_; + # Regenerate the full input line @@ -735,23 +1395,24 @@ sub AuthenticateHandler { # upass - User's password. my ($udom,$uname,$upass)=split(/:/,$tail); - Debug(" Authenticate domain = $udom, user = $uname, password = $upass"); + &Debug(" Authenticate domain = $udom, user = $uname, password = $upass"); chomp($upass); - $upass=unescape($upass); + $upass=&unescape($upass); - my $pwdcorrect = ValidateUser($udom, $uname, $upass); + my $pwdcorrect = &validate_user($udom, $uname, $upass); if($pwdcorrect) { - Reply( $client, "authorized\n", $userinput); + &Reply( $client, "authorized\n", $userinput); # # Bad credentials: Failed to authorize # } else { - Failure( $client, "non_authorized\n", $userinput); + &Failure( $client, "non_authorized\n", $userinput); } return 1; } -RegisterHandler("auth", \&AuthenticateHandler, 1, 1, 0); + +register_handler("auth", \&authenticate_handler, 1, 1, 0); # # Change a user's password. Note that this function is complicated by @@ -774,11 +1435,9 @@ RegisterHandler("auth", \&AuthenticateHa # Implicit inputs: # The authentication systems describe above have their own forms of implicit # input into the authentication process that are described above. -sub ChangePasswordHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - +sub change_password_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = $cmd.":".$tail; # Reconstruct client's string. # @@ -788,7 +1447,7 @@ sub ChangePasswordHandler { # npass - New password. my ($udom,$uname,$upass,$npass)=split(/:/,$tail); - chomp($npass); + $upass=&unescape($upass); $npass=&unescape($npass); &Debug("Trying to change password for $uname"); @@ -796,9 +1455,9 @@ sub ChangePasswordHandler { # First require that the user can be authenticated with their # old password: - my $validated = ValidateUser($udom, $uname, $upass); + my $validated = &validate_user($udom, $uname, $upass); if($validated) { - my $realpasswd = GetAuthType($udom, $uname); # Defined since authd. + my $realpasswd = &get_auth_type($udom, $uname); # Defined since authd. my ($howpwd,$contentpwd)=split(/:/,$realpasswd); if ($howpwd eq 'internal') { @@ -806,14 +1465,14 @@ sub ChangePasswordHandler { my $salt=time; $salt=substr($salt,6,2); my $ncpass=crypt($npass,$salt); - if(RewritePwFile($udom, $uname, "internal:$ncpass")) { + if(&rewrite_password_file($udom, $uname, "internal:$ncpass")) { &logthis("Result of password change for " ."$uname: pwchange_success"); - Reply($client, "ok\n", $userinput); + &Reply($client, "ok\n", $userinput); } else { &logthis("Unable to open $uname passwd " ."to change password"); - Failure( $client, "non_authorized\n",$userinput); + &Failure( $client, "non_authorized\n",$userinput); } } elsif ($howpwd eq 'unix') { # Unix means we have to access /etc/password @@ -829,23 +1488,23 @@ sub ChangePasswordHandler { my $result = ($err>0 ? 'pwchange_failure' : 'ok'); &logthis("Result of password change for $uname: ". &lcpasswdstrerror($?)); - Reply($client, "$result\n", $userinput); + &Reply($client, "$result\n", $userinput); } else { # this just means that the current password mode is not # one we know how to change (e.g the kerberos auth modes or # locally written auth handler). # - Reply( $client, "auth_mode_error\n", $userinput); + &Failure( $client, "auth_mode_error\n", $userinput); } - } - else { - Reply( $client, "non_authorized\n", $userinput); + } else { + &Failure( $client, "non_authorized\n", $userinput); } return 1; } -RegisterHandler("passwd", \&ChangePasswordHandler, 1, 1, 0); +register_handler("passwd", \&change_password_handler, 1, 1, 0); + # # Create a new user. User in this case means a lon-capa user. @@ -863,10 +1522,10 @@ RegisterHandler("passwd", \&ChangePasswo # Implicit inputs: # The authentication systems describe above have their own forms of implicit # input into the authentication process that are described above. -sub AddUserHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; +sub add_user_handler { + + my ($cmd, $tail, $client) = @_; + my ($udom,$uname,$umode,$npass)=split(/:/,$tail); my $userinput = $cmd.":".$tail; # Reconstruct the full request line. @@ -879,10 +1538,10 @@ sub AddUserHandler { my $oldumask=umask(0077); chomp($npass); $npass=&unescape($npass); - my $passfilename = PasswordPath($udom, $uname); + my $passfilename = &password_path($udom, $uname); &Debug("Password file created will be:".$passfilename); if (-e $passfilename) { - Failure( $client, "already_exists\n", $userinput); + &Failure( $client, "already_exists\n", $userinput); } else { my @fpparts=split(/\//,$passfilename); my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2]; @@ -899,21 +1558,21 @@ sub AddUserHandler { } unless ($fperror) { my $result=&make_passwd_file($uname, $umode,$npass, $passfilename); - Reply($client, $result, $userinput); #BUGBUG - could be fail + &Reply($client, $result, $userinput); #BUGBUG - could be fail } else { - Failure($client, "$fperror\n", $userinput); + &Failure($client, "$fperror\n", $userinput); } } umask($oldumask); } else { - Failure($client, "not_right_domain\n", + &Failure($client, "not_right_domain\n", $userinput); # Even if we are multihomed. } return 1; } -RegisterHandler("makeuser", \&AddUserHandler, 1, 1, 0); +®ister_handler("makeuser", \&add_user_handler, 1, 1, 0); # # Change the authentication method of a user. Note that this may @@ -937,33 +1596,32 @@ RegisterHandler("makeuser", \&AddUserHan # The authentication systems describe above have their own forms of implicit # input into the authentication process that are described above. # -sub ChangeAuthenticationHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; +sub change_authentication_handler { + + my ($cmd, $tail, $client) = @_; my $userinput = "$cmd:$tail"; # Reconstruct user input. my ($udom,$uname,$umode,$npass)=split(/:/,$tail); &Debug("cmd = ".$cmd." domain= ".$udom."uname =".$uname." umode= ".$umode); if ($udom ne $currentdomainid) { - Failure( $client, "not_right_domain\n", $client); + &Failure( $client, "not_right_domain\n", $client); } else { chomp($npass); $npass=&unescape($npass); - my $passfilename = PasswordPath($udom, $uname); + my $passfilename = &password_path($udom, $uname); if ($passfilename) { # Not allowed to create a new user!! my $result=&make_passwd_file($uname, $umode,$npass,$passfilename); - Reply($client, $result, $userinput); + &Reply($client, $result, $userinput); } else { - Failure($client, "non_authorized", $userinput); # Fail the user now. + &Failure($client, "non_authorized", $userinput); # Fail the user now. } } return 1; } -RegisterHandler("changeuserauth", \&ChangeAuthenticationHandler, 1,1, 0); +®ister_handler("changeuserauth", \&change_authentication_handler, 1,1, 0); # # Determines if this is the home server for a user. The home server @@ -981,24 +1639,23 @@ RegisterHandler("changeuserauth", \&Chan # The authentication systems describe above have their own forms of implicit # input into the authentication process that are described above. # -sub IsHomeHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; +sub is_home_handler { + my ($cmd, $tail, $client) = @_; my $userinput = "$cmd:$tail"; my ($udom,$uname)=split(/:/,$tail); chomp($uname); - my $passfile = PasswordFilename($udom, $uname); + my $passfile = &password_filename($udom, $uname); if($passfile) { - Reply( $client, "found\n", $userinput); + &Reply( $client, "found\n", $userinput); } else { - Failure($client, "not_found\n", $userinput); + &Failure($client, "not_found\n", $userinput); } return 1; } -RegisterHandler("home", \&IsHomeHandler, 0,1,0); +®ister_handler("home", \&is_home_handler, 0,1,0); + # # Process an update request for a resource?? I think what's going on here is # that a resource has been modified that we hold a subscription to. @@ -1021,14 +1678,15 @@ RegisterHandler("home", \&IsHomeHandler, # The authentication systems describe above have their own forms of implicit # input into the authentication process that are described above. # -sub UpdateResourceHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; +sub update_resource_handler { + + my ($cmd, $tail, $client) = @_; my $userinput = "$cmd:$tail"; - my $fname=$tail; + my $fname= $tail; # This allows interactive testing + + my $ownership=ishome($fname); if ($ownership eq 'not_owner') { if (-e $fname) { @@ -1070,19 +1728,20 @@ sub UpdateResourceHandler { rename($transname,$fname); } } - Reply( $client, "ok\n", $userinput); + &Reply( $client, "ok\n", $userinput); } else { - Failure($client, "not_found\n", $userinput); + &Failure($client, "not_found\n", $userinput); } } else { - Failure($client, "rejected\n", $userinput); + &Failure($client, "rejected\n", $userinput); } return 1; } -RegisterHandler("update", \&UpdateResourceHandler, 0 ,1, 0); +®ister_handler("update", \&update_resource_handler, 0 ,1, 0); # -# Fetch a user file from a remote server: +# Fetch a user file from a remote server to the user's home directory +# userfiles subdir. # Parameters: # $cmd - The command that got us here. # $tail - Tail of the command (remaining parameters). @@ -1091,15 +1750,14 @@ RegisterHandler("update", \&UpdateResour # 0 - Requested to exit, caller should shut down. # 1 - Continue processing. # -sub FetchUserFileHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - +sub fetch_user_file_handler { + + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; my $fname = $tail; my ($udom,$uname,$ufile)=split(/\//,$fname); - my $udir=propath($udom,$uname).'/userfiles'; + my $udir=&propath($udom,$uname).'/userfiles'; unless (-e $udir) { mkdir($udir,0770); } @@ -1121,2211 +1779,1351 @@ sub FetchUserFileHandler { unlink($transname); my $message=$response->status_line; &logthis("LWP GET: $message for $fname ($remoteurl)"); - Failure($client, "failed\n", $userinput); + &Failure($client, "failed\n", $userinput); } else { if (!rename($transname,$destname)) { &logthis("Unable to move $transname to $destname"); unlink($transname); - Failure($client, "failed\n", $userinput); + &Failure($client, "failed\n", $userinput); } else { - Reply($client, "ok\n", $userinput); + &Reply($client, "ok\n", $userinput); } } } else { - Failure($client, "not_home\n", $userinput); + &Failure($client, "not_home\n", $userinput); } return 1; } -RegisterHandler("fetchuserfile", \&FetchUserFileHandler, 0, 1, 0); -# -# Authenticate access to a user file. +®ister_handler("fetchuserfile", \&fetch_user_file_handler, 0, 1, 0); + # +# Remove a file from a user's home directory userfiles subdirectory. # Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. -sub AuthenticateUserFileAccess { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput = "$cmd:$tail"; +# cmd - the Lond request keyword that got us here. +# tail - the part of the command past the keyword. +# client- File descriptor connected with the client. +# +# Returns: +# 1 - Continue processing. - my ($fname,$session)=split(/:/,$tail); - chomp($session); - my $reply='non_auth'; - if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'.$session.'.id')) { - while (my $line=) { - if ($line=~/userfile\.$fname\=/) { - $reply='ok'; +sub remove_user_file_handler { + my ($cmd, $tail, $client) = @_; + + my ($fname) = split(/:/, $tail); # Get rid of any tailing :'s lonc may have sent. + + my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|); + &logthis("$udom - $uname - $ufile"); + if ($ufile =~m|/\.\./|) { + # any files paths with /../ in them refuse + # to deal with + &Failure($client, "refused\n", "$cmd:$tail"); + } else { + my $udir = &propath($udom,$uname); + if (-e $udir) { + my $file=$udir.'/userfiles/'.$ufile; + if (-e $file) { + unlink($file); + if (-e $file) { + &Failure($client, "failed\n", "$cmd:$tail"); + } else { + &Reply($client, "ok\n", "$cmd:$tail"); + } + } else { + &Failure($client, "not_found\n", "$cmd:$tail"); } + } else { + &Failure($client, "not_home\n", "$cmd:$tail"); } - close(ENVIN); - Reply($client, $reply."\n", $userinput); - } else { - Failure($client, "invalid_token\n", $userinput); } return 1; - } -RegisterHandler("tokenauthuserfile", \&AuthenticateUserFileAccess, 0, 1, 0); +®ister_handler("removeuserfile", \&remove_user_file_handler, 0,1,0); + +#--------------------------------------------------------------- # -# Unsubscribe from a resource. +# Getting, decoding and dispatching requests: # -# Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. -# -sub UnsubscribeHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput= "$cmd:$tail"; - - my $fname = $tail; - if (-e $fname) { - Reply($client, &unsub($client,$fname,$clientip), $userinput); - } else { - Failure($client, "not_found\n", $userinput); - } - return 1; -} -RegisterHandler("unusb", \&UnsubscribeHandler, 0, 1, 0); -# Subscribe to a resource # -# Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. +# Get a Request: +# Gets a Request message from the client. The transaction +# is defined as a 'line' of text. We remove the new line +# from the text line. # -sub SubscribeHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput = "$cmd:$tail"; +sub get_request { + my $input = <$client>; + chomp($input); - Reply( $client, &subscribe($userinput,$clientip), $userinput); + Debug("get_request: Request = $input\n"); - return 1; -} -RegisterHandler("sub", \&SubscribeHandler, 0, 1, 0); + &status('Processing '.$clientname.':'.$input); + return $input; +} +#--------------------------------------------------------------- # -# Determine the version of a resource (?) Or is it return -# the top version of the resource? Not yet clear from the -# code in currentversion. +# Process a request. This sub should shrink as each action +# gets farmed out into a separat sub that is registered +# with the dispatch hash. # # Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. +# user_input - The request received from the client (lonc). +# Returns: +# true to keep processing, false if caller should exit. # -sub CurrentVersionHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput= "$cmd:$tail"; - - my $fname = $tail; - Reply( $client, ¤tversion($fname)."\n", $userinput); - return 1; +sub process_request { + my ($userinput) = @_; # Easier for now to break style than to + # fix all the userinput -> user_input. + my $wasenc = 0; # True if request was encrypted. +# ------------------------------------------------------------ See if encrypted + if ($userinput =~ /^enc/) { + $userinput = decipher($userinput); + $wasenc=1; + if(!$userinput) { # Cipher not defined. + &Failure($client, "error: Encrypted data without negotated key"); + return 0; + } + } + Debug("process_request: $userinput\n"); + + # + # The 'correct way' to add a command to lond is now to + # write a sub to execute it and Add it to the command dispatch + # hash via a call to register_handler.. The comments to that + # sub should give you enough to go on to show how to do this + # along with the examples that are building up as this code + # is getting refactored. Until all branches of the + # if/elseif monster below have been factored out into + # separate procesor subs, if the dispatch hash is missing + # the command keyword, we will fall through to the remainder + # of the if/else chain below in order to keep this thing in + # working order throughout the transmogrification. -} -RegisterHandler("currentversion", \&CurrentVersionHandler, 0, 1, 0); + my ($command, $tail) = split(/:/, $userinput, 2); + chomp($command); + chomp($tail); + $tail =~ s/(\r)//; # This helps people debugging with e.g. telnet. + $command =~ s/(\r)//; # And this too for parameterless commands. + if(!$tail) { + $tail =""; # defined but blank. + } + &Debug("Command received: $command, encoded = $wasenc"); -# Make an entry in a user's activity log. -# -# Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. -# -sub ActivityLogEntryHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput= "$cmd:$tail"; + if(defined $Dispatcher{$command}) { - my ($udom,$uname,$what)=split(/:/,$tail); - chomp($what); - my $proname=propath($udom,$uname); - my $now=time; - my $hfh; - if ($hfh=IO::File->new(">>$proname/activity.log")) { - print $hfh "$now:$clientname:$what\n"; - Reply( $client, "ok\n", $userinput); - } else { - Failure($client, "error: ".($!+0)." IO::File->new Failed " - ."while attempting log\n", - $userinput); - } + my $dispatch_info = $Dispatcher{$command}; + my $handler = $$dispatch_info[0]; + my $need_encode = $$dispatch_info[1]; + my $client_types = $$dispatch_info[2]; + Debug("Matched dispatch hash: mustencode: $need_encode " + ."ClientType $client_types"); + + # Validate the request: + + my $ok = 1; + my $requesterprivs = 0; + if(&isClient()) { + $requesterprivs |= $CLIENT_OK; + } + if(&isManager()) { + $requesterprivs |= $MANAGER_OK; + } + if($need_encode && (!$wasenc)) { + Debug("Must encode but wasn't: $need_encode $wasenc"); + $ok = 0; + } + if(($client_types & $requesterprivs) == 0) { + Debug("Client not privileged to do this operation"); + $ok = 0; + } - return 1; -} -RegisterHandler("log", \&ActivityLogEntryHandler, 0, 1, 0); -# -# Put a namespace entry in a user profile hash. -# My druthers would be for this to be an encrypted interaction too. -# anything that might be an inadvertent covert channel about either -# user authentication or user personal information.... -# -# Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. -# -sub PutUserProfileEntry { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput = "$cmd:$tail"; - - my ($udom,$uname,$namespace,$what) =split(/:/,$tail); - if ($namespace ne 'roles') { - chomp($what); - my $hashref = TieUserHash($udom, $uname, $namespace, - &GDBM_WRCREAT(),"P",$what); - if($hashref) { - my @pairs=split(/\&/,$what); - foreach my $pair (@pairs) { - my ($key,$value)=split(/=/,$pair); - $hashref->{$key}=$value; - } - if (untie(%$hashref)) { - Reply( $client, "ok\n", $userinput); - } else { - Failure($client, "error: ".($!+0)." untie(GDBM) failed ". - "while attempting put\n", - $userinput); - } + if($ok) { + Debug("Dispatching to handler $command $tail"); + my $keep_going = &$handler($command, $tail, $client); + return $keep_going; } else { - Failure( $client, "error: ".($!)." tie(GDBM) Failed ". - "while attempting put\n", $userinput); + Debug("Refusing to dispatch because client did not match requirements"); + Failure($client, "refused\n", $userinput); + return 1; } - } else { - Failure( $client, "refused\n", $userinput); - } - - return 1; -} -RegisterHandler("put", \&PutUserProfileEntry, 0, 1, 0); -# -# Increment a profile entry in the user history file. -# The history contains keyword value pairs. In this case, -# The value itself is a pair of numbers. The first, the current value -# the second an increment that this function applies to the current -# value. -# -# Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. -# -sub IncrementUserValueHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput = "$cmd:$tail"; - - my ($udom,$uname,$namespace,$what) =split(/:/,$tail); - if ($namespace ne 'roles') { - chomp($what); - my $hashref = TieUserHash($udom, $uname, - $namespace, &GDBM_WRCREAT(), - "P",$what); - if ($hashref) { - my @pairs=split(/\&/,$what); - foreach my $pair (@pairs) { - my ($key,$value)=split(/=/,$pair); - # We could check that we have a number... - if (! defined($value) || $value eq '') { - $value = 1; - } - $hashref->{$key}+=$value; + } + +#------------------- Commands not yet in spearate handlers. -------------- + + + +# ------------------------------------------ authenticate access to a user file + + if ($userinput =~ /^tokenauthuserfile/) { # Client only + if(isClient) { + my ($cmd,$fname,$session)=split(/:/,$userinput); + chomp($session); + my $reply='non_auth'; + if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'. + $session.'.id')) { + while (my $line=) { + if ($line=~ m|userfile\.\Q$fname\E\=|) { $reply='ok'; } + } + close(ENVIN); + print $client $reply."\n"; + } else { + print $client "invalid_token\n"; } - if (untie(%$hashref)) { - Reply( $client, "ok\n", $userinput); + } else { + Reply($client, "refused\n", $userinput); + + } +# ----------------------------------------------------------------- unsubscribe + } elsif ($userinput =~ /^unsub/) { + if(isClient) { + my ($cmd,$fname)=split(/:/,$userinput); + if (-e $fname) { + print $client &unsub($fname,$clientip); } else { - Failure($client, "error: ".($!+0)." untie(GDBM) failed ". - "while attempting inc\n", $userinput); + print $client "not_found\n"; } } else { - Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting inc\n", $userinput); + Reply($client, "refused\n", $userinput); + } - } else { - Failure($client, "refused\n", $userinput); - } - - return 1; -} -RegisterHandler("inc", \&IncrementUserValueHandler, 0, 1, 0); -# -# Put a new role for a user. Roles are LonCAPA's packaging of permissions. -# Each 'role' a user has implies a set of permissions. Adding a new role -# for a person grants the permissions packaged with that role -# to that user when the role is selected. -# -# Parameters: -# $cmd - The command string (rolesput). -# $tail - The remainder of the request line. For rolesput this -# consists of a colon separated list that contains: -# The domain and user that is granting the role (logged). -# The domain and user that is getting the role. -# The roles being granted as a set of & separated pairs. -# each pair a key value pair. -# $client - File descriptor connected to the client. -# Returns: -# 0 - If the daemon should exit -# 1 - To continue processing. -# -# -sub RolesPutHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput = "$cmd:$tail"; - - my ($exedom,$exeuser,$udom,$uname,$what) =split(/:/,$tail); - &Debug("cmd = ".$cmd." exedom= ".$exedom."user = ".$exeuser." udom=".$udom. - "what = ".$what); - my $namespace='roles'; - chomp($what); - my $hashref = TieUserHash($udom, $uname, $namespace, - &GDBM_WRCREAT(), "P", - "$exedom:$exeuser:$what"); - # - # Log the attempt to set a role. The {}'s here ensure that the file - # handle is open for the minimal amount of time. Since the flush - # is done on close this improves the chances the log will be an un- - # corrupted ordered thing. - if ($hashref) { - my @pairs=split(/\&/,$what); - foreach my $pair (@pairs) { - my ($key,$value)=split(/=/,$pair); - &ManagePermissions($key, $udom, $uname, - &GetAuthType( $udom, $uname)); - $hashref->{$key}=$value; +# ------------------------------------------------------------------- subscribe + } elsif ($userinput =~ /^sub/) { + if(isClient) { + print $client &subscribe($userinput,$clientip); + } else { + Reply($client, "refused\n", $userinput); + } - if (untie($hashref)) { - Reply($client, "ok\n", $userinput); +# ------------------------------------------------------------- current version + } elsif ($userinput =~ /^currentversion/) { + if(isClient) { + my ($cmd,$fname)=split(/:/,$userinput); + print $client ¤tversion($fname)."\n"; } else { - Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting rolesput\n", $userinput); + Reply($client, "refused\n", $userinput); + } - } else { - Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting rolesput\n", $userinput); - } - return 1; -} -RegisterHandler("rolesput", \&RolesPutHandler, 1,1,0); # Encoded client only. -# -# Deletes (removes) a role for a user. This is equivalent to removing -# a permissions package associated with the role from the user's profile. -# -# Parameters: -# $cmd - The command (rolesdel) -# $tail - The remainder of the request line. This consists -# of: -# The domain and user requesting the change (logged) -# The domain and user being changed. -# The roles being revoked. These are shipped to us -# as a bunch of & separated role name keywords. -# $client - The file handle open on the client. -# Returns: -# 1 - Continue processing -# 0 - Exit. -# -sub RolesDeleteHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput = "$cmd:$tail"; - - my ($exedom,$exeuser,$udom,$uname,$what)=split(/:/,$tail); - &Debug("cmd = ".$cmd." exedom= ".$exedom."user = ".$exeuser." udom=".$udom. - "what = ".$what); - my $namespace='roles'; - chomp($what); - my $hashref = TieUserHash($udom, $uname, $namespace, - &GDBM_WRCREAT(), "D", - "$exedom:$exeuser:$what"); - - if ($hashref) { - my @rolekeys=split(/\&/,$what); - - foreach my $key (@rolekeys) { - delete $hashref->{$key}; +# ------------------------------------------------------------------------- log + } elsif ($userinput =~ /^log/) { + if(isClient) { + my ($cmd,$udom,$uname,$what)=split(/:/,$userinput); + chomp($what); + my $proname=propath($udom,$uname); + my $now=time; + { + my $hfh; + if ($hfh=IO::File->new(">>$proname/activity.log")) { + print $hfh "$now:$clientname:$what\n"; + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." IO::File->new Failed " + ."while attempting log\n"; + } + } + } else { + Reply($client, "refused\n", $userinput); + } - if (untie(%$hashref)) { - Reply($client, "ok\n", $userinput); +# ------------------------------------------------------------------------- put + } elsif ($userinput =~ /^put/) { + if(isClient) { + my ($cmd,$udom,$uname,$namespace,$what) + =split(/:/,$userinput,5); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + if ($namespace ne 'roles') { + chomp($what); + my $proname=propath($udom,$uname); + my $now=time; + my @pairs=split(/\&/,$what); + my %hash; + if (tie(%hash,'GDBM_File', + "$proname/$namespace.db", + &GDBM_WRCREAT(),0640)) { + unless ($namespace=~/^nohist\_/) { + my $hfh; + if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { print $hfh "P:$now:$what\n"; } + } + + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + $hash{$key}=$value; + } + if (untie(%hash)) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) failed ". + "while attempting put\n"; + } + } else { + print $client "error: ".($!) + ." tie(GDBM) Failed ". + "while attempting put\n"; + } + } else { + print $client "refused\n"; + } } else { - Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting rolesdel\n", $userinput); + Reply($client, "refused\n", $userinput); + } - } else { - Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting rolesdel\n", $userinput); - } - - return 1; -} -RegisterHandler("rolesdel", \&RolesDeleteHandler, 1,1, 0); # Encoded client only - -# Unencrypted get from a user's profile database. See -# GetProfileEntryEncrypted for a version that does end-to-end encryption. -# This function retrieves a keyed item from a specific named database in the -# user's directory. -# -# Parameters: -# $cmd - Command request keyword (get). -# $tail - Tail of the command. This is a colon separated list -# consisting of the domain and username that uniquely -# identifies the profile, -# The 'namespace' which selects the gdbm file to -# do the lookup in, -# & separated list of keys to lookup. Note that -# the values are returned as an & separated list too. -# $client - File descriptor open on the client. -# Returns: -# 1 - Continue processing. -# 0 - Exit. -# -sub GetProfileEntry { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput= "$cmd:$tail"; - - my ($udom,$uname,$namespace,$what) = split(/:/,$tail); - chomp($what); - my $hashref = TieUserHash($udom, $uname, $namespace, - &GDBM_READER()); - if ($hashref) { - my @queries=split(/\&/,$what); - my $qresult=''; - - for (my $i=0;$i<=$#queries;$i++) { - $qresult.="$hashref->{$queries[$i]}&"; # Presumably failure gives empty string. +# ------------------------------------------------------------------- inc + } elsif ($userinput =~ /^inc:/) { + if(isClient) { + my ($cmd,$udom,$uname,$namespace,$what) + =split(/:/,$userinput); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + if ($namespace ne 'roles') { + chomp($what); + my $proname=propath($udom,$uname); + my $now=time; + my @pairs=split(/\&/,$what); + my %hash; + if (tie(%hash,'GDBM_File', + "$proname/$namespace.db", + &GDBM_WRCREAT(),0640)) { + unless ($namespace=~/^nohist\_/) { + my $hfh; + if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { print $hfh "P:$now:$what\n"; } + } + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + # We could check that we have a number... + if (! defined($value) || $value eq '') { + $value = 1; + } + $hash{$key}+=$value; + } + if (untie(%hash)) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) failed ". + "while attempting inc\n"; + } + } else { + print $client "error: ".($!) + ." tie(GDBM) Failed ". + "while attempting inc\n"; + } + } else { + print $client "refused\n"; + } + } else { + Reply($client, "refused\n", $userinput); + } - $qresult=~s/\&$//; # Remove trailing & from last lookup. - if (untie(%$hashref)) { - Reply($client, "$qresult\n", $userinput); +# -------------------------------------------------------------------- rolesput + } elsif ($userinput =~ /^rolesput/) { + if(isClient) { + &Debug("rolesput"); + if ($wasenc==1) { + my ($cmd,$exedom,$exeuser,$udom,$uname,$what) + =split(/:/,$userinput); + &Debug("cmd = ".$cmd." exedom= ".$exedom. + "user = ".$exeuser." udom=".$udom. + "what = ".$what); + my $namespace='roles'; + chomp($what); + my $proname=propath($udom,$uname); + my $now=time; + my @pairs=split(/\&/,$what); + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) { + { + my $hfh; + if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { + print $hfh "P:$now:$exedom:$exeuser:$what\n"; + } + } + + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + &ManagePermissions($key, $udom, $uname, + &get_auth_type( $udom, + $uname)); + $hash{$key}=$value; + } + if (untie(%hash)) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting rolesput\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting rolesput\n"; + } + } else { + print $client "refused\n"; + } } else { - Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting get\n", $userinput); + Reply($client, "refused\n", $userinput); + } - } else { - if ($!+0 == 2) { # +0 coerces errno -> number 2 is ENOENT - Failure($client, "error:No such file or ". - "GDBM reported bad block error\n", $userinput); - } else { # Some other undifferentiated err. - Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting get\n", $userinput); +# -------------------------------------------------------------------- rolesdel + } elsif ($userinput =~ /^rolesdel/) { + if(isClient) { + &Debug("rolesdel"); + if ($wasenc==1) { + my ($cmd,$exedom,$exeuser,$udom,$uname,$what) + =split(/:/,$userinput); + &Debug("cmd = ".$cmd." exedom= ".$exedom. + "user = ".$exeuser." udom=".$udom. + "what = ".$what); + my $namespace='roles'; + chomp($what); + my $proname=propath($udom,$uname); + my $now=time; + my @rolekeys=split(/\&/,$what); + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) { + { + my $hfh; + if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { + print $hfh "D:$now:$exedom:$exeuser:$what\n"; + } + } + foreach my $key (@rolekeys) { + delete $hash{$key}; + } + if (untie(%hash)) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting rolesdel\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting rolesdel\n"; + } + } else { + print $client "refused\n"; + } + } else { + Reply($client, "refused\n", $userinput); + } - } - return 1; -} -RegisterHandler("get", \&GetProfileEntry, 0,1,0); -# -# Process the encrypted get request. Note that the request is sent -# in clear, but the reply is encrypted. This is a small covert channel: -# information about the sensitive keys is given to the snooper. Just not -# information about the values of the sensitive key. Hmm if I wanted to -# know these I'd snoop for the egets. Get the profile item names from them -# and then issue a get for them since there's no enforcement of the -# requirement of an encrypted get for particular profile items. If I -# were re-doing this, I'd force the request to be encrypted as well as the -# reply. I'd also just enforce encrypted transactions for all gets since -# that would prevent any covert channel snooping. -# -# Parameters: -# $cmd - Command keyword of request (eget). -# $tail - Tail of the command. See GetProfileEntry # for more information about this. -# $client - File open on the client. -# Returns: -# 1 - Continue processing -# 0 - server should exit. -sub GetProfileEntryEncrypted { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput = "$cmd:$tail"; - - my ($cmd,$udom,$uname,$namespace,$what) = split(/:/,$userinput); - chomp($what); - my $hashref = TieUserHash($udom, $uname, $namespace, - &GDBM_READER()); - if ($hashref) { - my @queries=split(/\&/,$what); - my $qresult=''; - for (my $i=0;$i<=$#queries;$i++) { - $qresult.="$hashref->{$queries[$i]}&"; - } - if (untie(%$hashref)) { - $qresult=~s/\&$//; - if ($cipher) { - my $cmdlength=length($qresult); - $qresult.=" "; - my $encqresult=''; - for(my $encidx=0;$encidx<=$cmdlength;$encidx+=8) { - $encqresult.= unpack("H16", - $cipher->encrypt(substr($qresult, - $encidx, - 8))); +# ------------------------------------------------------------------------- get + } elsif ($userinput =~ /^get/) { + if(isClient) { + my ($cmd,$udom,$uname,$namespace,$what) + =split(/:/,$userinput); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + chomp($what); + my @queries=split(/\&/,$what); + my $proname=propath($udom,$uname); + my $qresult=''; + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { + for (my $i=0;$i<=$#queries;$i++) { + $qresult.="$hash{$queries[$i]}&"; + } + if (untie(%hash)) { + $qresult=~s/\&$//; + print $client "$qresult\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting get\n"; } - Reply( $client, "enc:$cmdlength:$encqresult\n", $userinput); } else { - Failure( $client, "error:no_key\n", $userinput); + if ($!+0 == 2) { + print $client "error:No such file or ". + "GDBM reported bad block error\n"; + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting get\n"; + } } } else { - Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting eget\n", $userinput); + Reply($client, "refused\n", $userinput); + } - } else { - Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting eget\n", $userinput); - } - - return 1; -} -RegisterHandler("eget", \&GetProfileEntryEncrypted, 0, 1, 0); - -# -# Deletes a key in a user profile database. -# -# Parameters: -# $cmd - Command keyword (del). -# $tail - Command tail. IN this case a colon -# separated list containing: -# The domain and user that identifies uniquely -# the identity of the user. -# The profile namespace (name of the profile -# database file). -# & separated list of keywords to delete. -# $client - File open on client socket. -# Returns: -# 1 - Continue processing -# 0 - Exit server. -# -# - -sub DeleteProfileEntry { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput = "cmd:$tail"; - - my ($udom,$uname,$namespace,$what) = split(/:/,$tail); - chomp($what); - my $hashref = TieUserHash($udom, $uname, $namespace, - &GDBM_WRCREAT(), - "D",$what); - if ($hashref) { - my @keys=split(/\&/,$what); - foreach my $key (@keys) { - delete($hashref->{$key}); +# ------------------------------------------------------------------------ eget + } elsif ($userinput =~ /^eget/) { + if (isClient) { + my ($cmd,$udom,$uname,$namespace,$what) + =split(/:/,$userinput); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + chomp($what); + my @queries=split(/\&/,$what); + my $proname=propath($udom,$uname); + my $qresult=''; + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { + for (my $i=0;$i<=$#queries;$i++) { + $qresult.="$hash{$queries[$i]}&"; + } + if (untie(%hash)) { + $qresult=~s/\&$//; + if ($cipher) { + my $cmdlength=length($qresult); + $qresult.=" "; + my $encqresult=''; + for + (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) { + $encqresult.= + unpack("H16", + $cipher->encrypt(substr($qresult,$encidx,8))); + } + print $client "enc:$cmdlength:$encqresult\n"; + } else { + print $client "error:no_key\n"; + } + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting eget\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting eget\n"; + } + } else { + Reply($client, "refused\n", $userinput); + } - if (untie(%$hashref)) { - Reply($client, "ok\n", $userinput); +# ------------------------------------------------------------------------- del + } elsif ($userinput =~ /^del/) { + if(isClient) { + my ($cmd,$udom,$uname,$namespace,$what) + =split(/:/,$userinput); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + chomp($what); + my $proname=propath($udom,$uname); + my $now=time; + my @keys=split(/\&/,$what); + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) { + unless ($namespace=~/^nohist\_/) { + my $hfh; + if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { print $hfh "D:$now:$what\n"; } + } + foreach my $key (@keys) { + delete($hash{$key}); + } + if (untie(%hash)) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting del\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting del\n"; + } } else { - Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting del\n", $userinput); + Reply($client, "refused\n", $userinput); + } - } else { - Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting del\n", $userinput); - } - return 1; -} -RegisterHandler("del", \&DeleteProfileEntry, 0, 1, 0); -# -# List the set of keys that are defined in a profile database file. -# A successful reply from this will contain an & separated list of -# the keys. -# Parameters: -# $cmd - Command request (keys). -# $tail - Remainder of the request, a colon separated -# list containing domain/user that identifies the -# user being queried, and the database namespace -# (database filename essentially). -# $client - File open on the client. -# Returns: -# 1 - Continue processing. -# 0 - Exit the server. -# -sub GetProfileKeys { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput = "$cmd:$tail"; - - my ($udom,$uname,$namespace)=split(/:/,$tail); - my $qresult=''; - my $hashref = TieUserHash($udom, $uname, $namespace, - &GDBM_READER()); - if ($hashref) { - foreach my $key (keys %$hashref) { - $qresult.="$key&"; - } - if (untie(%$hashref)) { - $qresult=~s/\&$//; - Reply($client, "$qresult\n", $userinput); +# ------------------------------------------------------------------------ keys + } elsif ($userinput =~ /^keys/) { + if(isClient) { + my ($cmd,$udom,$uname,$namespace) + =split(/:/,$userinput); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + my $proname=propath($udom,$uname); + my $qresult=''; + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { + foreach my $key (keys %hash) { + $qresult.="$key&"; + } + if (untie(%hash)) { + $qresult=~s/\&$//; + print $client "$qresult\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting keys\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting keys\n"; + } } else { - Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting keys\n", $userinput); + Reply($client, "refused\n", $userinput); + } - } else { - Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting keys\n", $userinput); - } - - return 1; -} -RegisterHandler("keys", \&GetProfileKeys, 0, 1, 0); -# -# Dump the contents of a user profile database. -# Note that this constitutes a very large covert channel too since -# the dump will return sensitive information that is not encrypted. -# The naive security assumption is that the session negotiation ensures -# our client is trusted and I don't believe that's assured at present. -# Sure want badly to go to ssl or tls. Of course if my peer isn't really -# a LonCAPA node they could have negotiated an encryption key too so >sigh<. -# -# Parameters: -# $cmd - The command request keyword (currentdump). -# $tail - Remainder of the request, consisting of a colon -# separated list that has the domain/username and -# the namespace to dump (database file). -# $client - file open on the remote client. -# Returns: -# 1 - Continue processing. -# 0 - Exit the server. -# -sub DumpProfileDatabase { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput = "$cmd:$tail"; - - my ($udom,$uname,$namespace) = split(/:/,$tail); - my $hashref = TieUserHash($udom, $uname, $namespace, - &GDBM_READER()); - if ($hashref) { - # Structure of %data: - # $data{$symb}->{$parameter}=$value; - # $data{$symb}->{'v.'.$parameter}=$version; - # since $parameter will be unescaped, we do not - # have to worry about silly parameter names... - - my $qresult=''; - my %data = (); # A hash of anonymous hashes.. - while (my ($key,$value) = each(%$hashref)) { - my ($v,$symb,$param) = split(/:/,$key); - next if ($v eq 'version' || $symb eq 'keys'); - next if (exists($data{$symb}) && - exists($data{$symb}->{$param}) && - $data{$symb}->{'v.'.$param} > $v); - $data{$symb}->{$param}=$value; - $data{$symb}->{'v.'.$param}=$v; - } - if (untie(%$hashref)) { - while (my ($symb,$param_hash) = each(%data)) { - while(my ($param,$value) = each (%$param_hash)){ - next if ($param =~ /^v\./); # Ignore versions... - # - # Just dump the symb=value pairs separated by & - # - $qresult.=$symb.':'.$param.'='.$value.'&'; +# ----------------------------------------------------------------- dumpcurrent + } elsif ($userinput =~ /^currentdump/) { + if (isClient) { + my ($cmd,$udom,$uname,$namespace) + =split(/:/,$userinput); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + my $qresult=''; + my $proname=propath($udom,$uname); + my %hash; + if (tie(%hash,'GDBM_File', + "$proname/$namespace.db", + &GDBM_READER(),0640)) { + # Structure of %data: + # $data{$symb}->{$parameter}=$value; + # $data{$symb}->{'v.'.$parameter}=$version; + # since $parameter will be unescaped, we do not + # have to worry about silly parameter names... + my %data = (); + while (my ($key,$value) = each(%hash)) { + my ($v,$symb,$param) = split(/:/,$key); + next if ($v eq 'version' || $symb eq 'keys'); + next if (exists($data{$symb}) && + exists($data{$symb}->{$param}) && + $data{$symb}->{'v.'.$param} > $v); + $data{$symb}->{$param}=$value; + $data{$symb}->{'v.'.$param}=$v; + } + if (untie(%hash)) { + while (my ($symb,$param_hash) = each(%data)) { + while(my ($param,$value) = each (%$param_hash)){ + next if ($param =~ /^v\./); + $qresult.=$symb.':'.$param.'='.$value.'&'; + } + } + chop($qresult); + print $client "$qresult\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting currentdump\n"; } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting currentdump\n"; } - chop($qresult); - Reply($client , "$qresult\n", $userinput); } else { - Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting currentdump\n", $userinput); + Reply($client, "refused\n", $userinput); } - } else { - Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting currentdump\n", $userinput); - } - - return 1; -} -RegisterHandler("currentdump", \&DumpProfileDatabase, 0, 1, 0); -# -# Dump a profile database with an optional regular expression -# to match against the keys. In this dump, no effort is made -# to separate symb from version information. Presumably the -# databases that are dumped by this command are of a different -# structure. Need to look at this and improve the documentation of -# both this and the currentdump handler. -# Parameters: -# $cmd - The command keyword. -# $tail - All of the characters after the $cmd: -# These are expected to be a colon -# separated list containing: -# domain/user - identifying the user. -# namespace - identifying the database. -# regexp - optional regular expression -# that is matched against -# database keywords to do -# selective dumps. -# $client - Channel open on the client. -# Returns: -# 1 - Continue processing. -# Side effects: -# response is written to $client. -# -sub DumpWithRegexp { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - my ($udom,$uname,$namespace,$regexp)=split(/:/,$tail); - if (defined($regexp)) { - $regexp=&unescape($regexp); - } else { - $regexp='.'; - } - my $hashref =TieUserHash($udom, $uname, $namespace, - &GDBM_READER()); - if ($hashref) { - my $qresult=''; - while (my ($key,$value) = each(%$hashref)) { - if ($regexp eq '.') { - $qresult.=$key.'='.$value.'&'; +# ------------------------------------------------------------------------ dump + } elsif ($userinput =~ /^dump/) { + if(isClient) { + my ($cmd,$udom,$uname,$namespace,$regexp) + =split(/:/,$userinput); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + if (defined($regexp)) { + $regexp=&unescape($regexp); } else { - my $unescapeKey = &unescape($key); - if (eval('$unescapeKey=~/$regexp/')) { - $qresult.="$key=$value&"; + $regexp='.'; + } + my $qresult=''; + my $proname=propath($udom,$uname); + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { + while (my ($key,$value) = each(%hash)) { + if ($regexp eq '.') { + $qresult.=$key.'='.$value.'&'; + } else { + my $unescapeKey = &unescape($key); + if (eval('$unescapeKey=~/$regexp/')) { + $qresult.="$key=$value&"; + } + } + } + if (untie(%hash)) { + chop($qresult); + print $client "$qresult\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting dump\n"; } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting dump\n"; } + } else { + Reply($client, "refused\n", $userinput); + } - if (untie(%$hashref)) { - chop($qresult); - Reply($client, "$qresult\n", $userinput); +# ----------------------------------------------------------------------- store + } elsif ($userinput =~ /^store/) { + if(isClient) { + my ($cmd,$udom,$uname,$namespace,$rid,$what) + =split(/:/,$userinput); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + if ($namespace ne 'roles') { + chomp($what); + my $proname=propath($udom,$uname); + my $now=time; + my @pairs=split(/\&/,$what); + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) { + unless ($namespace=~/^nohist\_/) { + my $hfh; + if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { + print $hfh "P:$now:$rid:$what\n"; + } + } + my @previouskeys=split(/&/,$hash{"keys:$rid"}); + my $key; + $hash{"version:$rid"}++; + my $version=$hash{"version:$rid"}; + my $allkeys=''; + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + $allkeys.=$key.':'; + $hash{"$version:$rid:$key"}=$value; + } + $hash{"$version:$rid:timestamp"}=$now; + $allkeys.='timestamp'; + $hash{"$version:keys:$rid"}=$allkeys; + if (untie(%hash)) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting store\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting store\n"; + } + } else { + print $client "refused\n"; + } } else { - Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting dump\n", $userinput); + Reply($client, "refused\n", $userinput); + } - } else { - Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting dump\n", $userinput); - } - - return 1; -} -RegisterHandler("dump", \&DumpWithRegexp, 0, 1, 0); - -# Store an aitem in any resource meta data(?) or database with -# versioning? -# -# Parameters: -# $cmd - Request command keyword. -# $tail - Tail of the request. This is a colon -# separated list containing: -# domain/user - User and authentication domain. -# namespace - Name of the database being modified -# rid - Resource keyword to modify. -# what - new value associated with rid. -# -# $client - Socket open on the client. -# -# -# Returns: -# 1 (keep on processing). -# Side-Effects: -# Writes to the client -sub StoreHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - my ($udom,$uname,$namespace,$rid,$what) =split(/:/,$tail); - if ($namespace ne 'roles') { - - chomp($what); - my @pairs=split(/\&/,$what); - my $hashref = TieUserHash($udom, $uname, $namespace, - &GDBM_WRCREAT(), "P", - "$rid:$what"); - if ($hashref) { - my $now = time; - my @previouskeys=split(/&/,$hashref->{"keys:$rid"}); - my $key; - $hashref->{"version:$rid"}++; - my $version=$hashref->{"version:$rid"}; - my $allkeys=''; - foreach my $pair (@pairs) { - my ($key,$value)=split(/=/,$pair); - $allkeys.=$key.':'; - $hashref->{"$version:$rid:$key"}=$value; - } - $hashref->{"$version:$rid:timestamp"}=$now; - $allkeys.='timestamp'; - $hashref->{"$version:keys:$rid"}=$allkeys; - if (untie($hashref)) { - Reply($client, "ok\n", $userinput); +# --------------------------------------------------------------------- restore + } elsif ($userinput =~ /^restore/) { + if(isClient) { + my ($cmd,$udom,$uname,$namespace,$rid) + =split(/:/,$userinput); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + chomp($rid); + my $proname=propath($udom,$uname); + my $qresult=''; + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { + my $version=$hash{"version:$rid"}; + $qresult.="version=$version&"; + my $scope; + for ($scope=1;$scope<=$version;$scope++) { + my $vkeys=$hash{"$scope:keys:$rid"}; + my @keys=split(/:/,$vkeys); + my $key; + $qresult.="$scope:keys=$vkeys&"; + foreach $key (@keys) { + $qresult.="$scope:$key=".$hash{"$scope:$rid:$key"}."&"; + } + } + if (untie(%hash)) { + $qresult=~s/\&$//; + print $client "$qresult\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting restore\n"; + } } else { - Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting store\n", $userinput); + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting restore\n"; } + } else { + Reply($client, "refused\n", $userinput); + + } +# -------------------------------------------------------------------- chatsend + } elsif ($userinput =~ /^chatsend/) { + if(isClient) { + my ($cmd,$cdom,$cnum,$newpost)=split(/\:/,$userinput); + &chatadd($cdom,$cnum,$newpost); + print $client "ok\n"; } else { - Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting store\n", $userinput); + Reply($client, "refused\n", $userinput); + } - } else { - Failure($client, "refused\n", $userinput); - } - - return 1; -} -RegisterHandler("store", \&StoreHandler, 0, 1, 0); -# -# Restore a prior version of a resource. -# -# Parameters: -# $cmd - Command keyword. -# $tail - Remainder of the request which consists of: -# domain/user - User and auth. domain. -# namespace - name of resource database. -# rid - Resource id. -# $client - socket open on the client. -# -# Returns: -# 1 indicating the caller should not yet exit. -# Side-effects: -# Writes a reply to the client. -# -sub RestoreHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; # Only used for logging purposes. - - my ($cmd,$udom,$uname,$namespace,$rid) = split(/:/,$userinput); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - chomp($rid); - my $proname=propath($udom,$uname); - my $qresult=''; - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db", - &GDBM_READER(),0640)) { - my $version=$hash{"version:$rid"}; - $qresult.="version=$version&"; - my $scope; - for ($scope=1;$scope<=$version;$scope++) { - my $vkeys=$hash{"$scope:keys:$rid"}; - my @keys=split(/:/,$vkeys); - my $key; - $qresult.="$scope:keys=$vkeys&"; - foreach $key (@keys) { - $qresult.="$scope:$key=".$hash{"$scope:$rid:$key"}."&"; - } - } - if (untie(%hash)) { - $qresult=~s/\&$//; - Reply( $client, "$qresult\n", $userinput); +# -------------------------------------------------------------------- chatretr + } elsif ($userinput =~ /^chatretr/) { + if(isClient) { + my + ($cmd,$cdom,$cnum,$udom,$uname)=split(/\:/,$userinput); + my $reply=''; + foreach (&getchat($cdom,$cnum,$udom,$uname)) { + $reply.=&escape($_).':'; + } + $reply=~s/\:$//; + print $client $reply."\n"; } else { - Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting restore\n", $userinput); + Reply($client, "refused\n", $userinput); + } - } else { - Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting restore\n", $userinput); - } - - return 1; - - -} -RegisterHandler("restore", \&RestoreHandler, 0,1,0); - -# -# Add a chat message to to a discussion board. -# -# Parameters: -# $cmd - Request keyword. -# $tail - Tail of the command. A colon separated list -# containing: -# cdom - Domain on which the chat board lives -# cnum - Identifier of the discussion group. -# post - Body of the posting. -# $client - Socket open on the client. -# Returns: -# 1 - Indicating caller should keep on processing. -# -# Side-effects: -# writes a reply to the client. -# -# -sub SendChatHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - my ($cdom,$cnum,$newpost)=split(/\:/,$tail); - &chatadd($cdom,$cnum,$newpost); - Reply($client, "ok\n", $userinput); - - return 1; -} -RegisterHandler("chatsend", \&SendChatHandler, 0, 1, 0); -# -# Retrieve the set of chat messagss from a discussion board. -# -# Parameters: -# $cmd - Command keyword that initiated the request. -# $tail - Remainder of the request after the command -# keyword. In this case a colon separated list of -# chat domain - Which discussion board. -# chat id - Discussion thread(?) -# domain/user - Authentication domain and username -# of the requesting person. -# $client - Socket open on the client program. -# Returns: -# 1 - continue processing -# Side effects: -# Response is written to the client. -# -sub RetrieveChatHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - my ($cdom,$cnum,$udom,$uname)=split(/\:/,$tail); - my $reply=''; - foreach (&getchat($cdom,$cnum,$udom,$uname)) { - $reply.=&escape($_).':'; - } - $reply=~s/\:$//; - Reply($client, $reply."\n", $userinput); - - - return 1; -} -RegisterHandler("chatretr", \&RetrieveChatHandler, 0, 1, 0); -# -# Initiate a query of an sql database. SQL query repsonses get put in -# a file for later retrieval. This prevents sql query results from -# bottlenecking the system. Note that with loncnew, perhaps this is -# less of an issue since multiple outstanding requests can be concurrently -# serviced. -# -# Parameters: -# $cmd - COmmand keyword that initiated the request. -# $tail - Remainder of the command after the keyword. -# For this function, this consists of a query and -# 3 arguments that are self-documentingly labelled -# in the original arg1, arg2, arg3. -# $client - Socket open on the client. -# Return: -# 1 - Indicating processing should continue. -# Side-effects: -# a reply is written to $client. -# -sub SendQueryHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - my ($query,$arg1,$arg2,$arg3)=split(/\:/,$tail); - $query=~s/\n*$//g; - Reply($client, "". sqlreply("$clientname\&$query". - "\&$arg1"."\&$arg2"."\&$arg3")."\n", - $userinput); - - return 1; -} -RegisterHandler("querysend", \&SendQueryHandler, 0, 1, 0); - -# -# Add a reply to an sql query. SQL queries are done asyncrhonously. -# The query is submitted via a "querysend" transaction. -# There it is passed on to the lonsql daemon, queued and issued to -# mysql. -# This transaction is invoked when the sql transaction is complete -# it stores the query results in flie and indicates query completion. -# presumably local software then fetches this response... I'm guessing -# the sequence is: lonc does a querysend, we ask lonsql to do it. -# lonsql on completion of the query interacts with the lond of our -# client to do a query reply storing two files: -# - id - The results of the query. -# - id.end - Indicating the transaction completed. -# NOTE: id is a unique id assigned to the query and querysend time. -# Parameters: -# $cmd - Command keyword that initiated this request. -# $tail - Remainder of the tail. In this case that's a colon -# separated list containing the query Id and the -# results of the query. -# $client - Socket open on the client. -# Return: -# 1 - Indicating that we should continue processing. -# Side effects: -# ok written to the client. -# -sub ReplyQueryHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - my ($cmd,$id,$reply)=split(/:/,$userinput); - my $store; - my $execdir=$perlvar{'lonDaemons'}; - if ($store=IO::File->new(">$execdir/tmp/$id")) { - $reply=~s/\&/\n/g; - print $store $reply; - close $store; - my $store2=IO::File->new(">$execdir/tmp/$id.end"); - print $store2 "done\n"; - close $store2; - Reply($client, "ok\n", $userinput); - } else { - Failure($client, "error: ".($!+0) - ." IO::File->new Failed ". - "while attempting queryreply\n", $userinput); - } - - - return 1; -} -RegisterHandler("queryreply", \&ReplyQueryHandler, 0, 1, 0); -# -# Process the courseidput query. Not quite sure what this means -# at the system level sense. It appears a gdbm file in the -# /home/httpd/lonUsers/$domain/nohist_courseids is tied and -# a set of entries made in that database. -# -# Parameters: -# $cmd - The command keyword that initiated this request. -# $tail - Tail of the command. In this case consists of a colon -# separated list contaning the domain to apply this to and -# an ampersand separated list of keyword=value pairs. -# $client - Socket open on the client. -# Returns: -# 1 - indicating that processing should continue -# -# Side effects: -# reply is written to the client. -# -sub PutCourseIdHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - my ($udom, $what) = split(/:/, $tail); - chomp($what); - my $now=time; - my @pairs=split(/\&/,$what); - - my $hashref = TieDomainHash($udom, "nohist_courseids", &GDBM_WRCREAT()); - if ($hashref) { - foreach my $pair (@pairs) { - my ($key,$value)=split(/=/,$pair); - $hashref->{$key}=$value.':'.$now; - } - if (untie(%$hashref)) { - Reply($client, "ok\n", $userinput); - } else { - Failure( $client, "error: ".($!+0) - ." untie(GDBM) Failed ". - "while attempting courseidput\n", $userinput); +# ------------------------------------------------------------------- querysend + } elsif ($userinput =~ /^querysend/) { + if (isClient) { + my ($cmd,$query, + $arg1,$arg2,$arg3)=split(/\:/,$userinput); + $query=~s/\n*$//g; + print $client "". + sqlreply("$clientname\&$query". + "\&$arg1"."\&$arg2"."\&$arg3")."\n"; + } else { + Reply($client, "refused\n", $userinput); + } - } else { - Failure( $client, "error: ".($!+0) - ." tie(GDBM) Failed ". - "while attempting courseidput\n", $userinput); - } - - return 1; -} -RegisterHandler("courseidput", \&PutCourseIdHandler, 0, 1, 0); - -# Retrieves the value of a course id resource keyword pattern -# defined since a starting date. Both the starting date and the -# keyword pattern are optional. If the starting date is not supplied it -# is treated as the beginning of time. If the pattern is not found, -# it is treatred as "." matching everything. -# -# Parameters: -# $cmd - Command keyword that resulted in us being dispatched. -# $tail - The remainder of the command that, in this case, consists -# of a colon separated list of: -# domain - The domain in which the course database is -# defined. -# since - Optional parameter describing the minimum -# time of definition(?) of the resources that -# will match the dump. -# description - regular expression that is used to filter -# the dump. Only keywords matching this regexp -# will be used. -# $client - The socket open on the client. -# Returns: -# 1 - Continue processing. -# Side Effects: -# a reply is written to $client. -sub DumpCourseIdHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - my ($udom,$since,$description) =split(/:/,$tail); - if (defined($description)) { - $description=&unescape($description); - } else { - $description='.'; - } - unless (defined($since)) { $since=0; } - my $qresult=''; - logthis(" Looking for $description since $since"); - my $hashref = TieDomainHash($udom, "nohist_courseids", &GDBM_WRCREAT()); - if ($hashref) { - while (my ($key,$value) = each(%$hashref)) { - my ($descr,$lasttime)=split(/\:/,$value); - logthis("Got: key = $key descr = $descr time: $lasttime"); - if ($lasttime<$since) { - logthis("Skipping .. too early"); - next; - } - if ($description eq '.') { - logthis("Adding wildcard match"); - $qresult.=$key.'='.$descr.'&'; +# ------------------------------------------------------------------ queryreply + } elsif ($userinput =~ /^queryreply/) { + if(isClient) { + my ($cmd,$id,$reply)=split(/:/,$userinput); + my $store; + my $execdir=$perlvar{'lonDaemons'}; + if ($store=IO::File->new(">$execdir/tmp/$id")) { + $reply=~s/\&/\n/g; + print $store $reply; + close $store; + my $store2=IO::File->new(">$execdir/tmp/$id.end"); + print $store2 "done\n"; + close $store2; + print $client "ok\n"; } else { - my $unescapeVal = &unescape($descr); - logthis("Matching with $unescapeVal"); - if (eval('$unescapeVal=~/$description/i')) { - logthis("Adding on match"); - $qresult.="$key=$descr&"; + print $client "error: ".($!+0) + ." IO::File->new Failed ". + "while attempting queryreply\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } +# ----------------------------------------------------------------- courseidput + } elsif ($userinput =~ /^courseidput/) { + if(isClient) { + my ($cmd,$udom,$what)=split(/:/,$userinput); + chomp($what); + $udom=~s/\W//g; + my $proname= + "$perlvar{'lonUsersDir'}/$udom/nohist_courseids"; + my $now=time; + my @pairs=split(/\&/,$what); + my %hash; + if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) { + foreach my $pair (@pairs) { + my ($key,$descr,$inst_code)=split(/=/,$pair); + $hash{$key}=$descr.':'.$inst_code.':'.$now; } + if (untie(%hash)) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting courseidput\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting courseidput\n"; } + } else { + Reply($client, "refused\n", $userinput); + } - if (untie(%$hashref)) { - chop($qresult); - Reply($client, "$qresult\n", $userinput); +# ---------------------------------------------------------------- courseiddump + } elsif ($userinput =~ /^courseiddump/) { + if(isClient) { + my ($cmd,$udom,$since,$description) + =split(/:/,$userinput); + if (defined($description)) { + $description=&unescape($description); + } else { + $description='.'; + } + unless (defined($since)) { $since=0; } + my $qresult=''; + my $proname= + "$perlvar{'lonUsersDir'}/$udom/nohist_courseids"; + my %hash; + if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) { + while (my ($key,$value) = each(%hash)) { + my ($descr,$lasttime,$inst_code); + if ($value =~ m/^([^\:]*):([^\:]*):(\d+)$/) { + ($descr,$inst_code,$lasttime)=($1,$2,$3); + } else { + ($descr,$lasttime) = split(/\:/,$value); + } + if ($lasttime<$since) { next; } + if ($description eq '.') { + $qresult.=$key.'='.$descr.':'.$inst_code.'&'; + } else { + my $unescapeVal = &unescape($descr); + if (eval('$unescapeVal=~/\Q$description\E/i')) { + $qresult.=$key.'='.$descr.':'.$inst_code.'&'; + } + } + } + if (untie(%hash)) { + chop($qresult); + print $client "$qresult\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting courseiddump\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting courseiddump\n"; + } } else { - Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting courseiddump\n", $userinput); + Reply($client, "refused\n", $userinput); + } - } else { - Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting courseiddump\n", $userinput); - } - - - return 1; -} -RegisterHandler("courseiddump", \&DumpCourseIdHandler, 0, 1, 0); -# -# Puts an id to a domains id database. -# -# Parameters: -# $cmd - The command that triggered us. -# $tail - Remainder of the request other than the command. This is a -# colon separated list containing: -# $domain - The domain for which we are writing the id. -# $pairs - The id info to write... this is and & separated list -# of keyword=value. -# $client - Socket open on the client. -# Returns: -# 1 - Continue processing. -# Side effects: -# reply is written to $client. -# -sub PutIdHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - my ($udom,$what)=split(/:/,$tail); - chomp($what); - my @pairs=split(/\&/,$what); - my $hashref = TieDomainHash($udom, "ids", &GDBM_WRCREAT(), - "P", $what); - if ($hashref) { - foreach my $pair (@pairs) { - my ($key,$value)=split(/=/,$pair); - $hashref->{$key}=$value; +# ----------------------------------------------------------------------- idput + } elsif ($userinput =~ /^idput/) { + if(isClient) { + my ($cmd,$udom,$what)=split(/:/,$userinput); + chomp($what); + $udom=~s/\W//g; + my $proname="$perlvar{'lonUsersDir'}/$udom/ids"; + my $now=time; + my @pairs=split(/\&/,$what); + my %hash; + if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) { + { + my $hfh; + if ($hfh=IO::File->new(">>$proname.hist")) { + print $hfh "P:$now:$what\n"; + } + } + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + $hash{$key}=$value; + } + if (untie(%hash)) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting idput\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting idput\n"; + } + } else { + Reply($client, "refused\n", $userinput); + } - if (untie(%$hashref)) { - Reply($client, "ok\n", $userinput); +# ----------------------------------------------------------------------- idget + } elsif ($userinput =~ /^idget/) { + if(isClient) { + my ($cmd,$udom,$what)=split(/:/,$userinput); + chomp($what); + $udom=~s/\W//g; + my $proname="$perlvar{'lonUsersDir'}/$udom/ids"; + my @queries=split(/\&/,$what); + my $qresult=''; + my %hash; + if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) { + for (my $i=0;$i<=$#queries;$i++) { + $qresult.="$hash{$queries[$i]}&"; + } + if (untie(%hash)) { + $qresult=~s/\&$//; + print $client "$qresult\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting idget\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting idget\n"; + } } else { - Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting idput\n", $userinput); + Reply($client, "refused\n", $userinput); + } - } else { - Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting idput\n", $userinput); - } - - return 1; -} - -RegisterHandler("idput", \&PutIdHandler, 0, 1, 0); -# -# Retrieves a set of id values from the id database. -# Returns an & separated list of results, one for each requested id to the -# client. -# -# Parameters: -# $cmd - Command keyword that caused us to be dispatched. -# $tail - Tail of the command. Consists of a colon separated: -# domain - the domain whose id table we dump -# ids Consists of an & separated list of -# id keywords whose values will be fetched. -# nonexisting keywords will have an empty value. -# $client - Socket open on the client. -# -# Returns: -# 1 - indicating processing should continue. -# Side effects: -# An & separated list of results is written to $client. -# -sub GetIdHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$client:$tail"; - - my ($udom,$what)=split(/:/,$tail); - chomp($what); - my @queries=split(/\&/,$what); - my $qresult=''; - my $hashref = TieDomainHash($udom, "ids", &GDBM_READER()); - if ($hashref) { - for (my $i=0;$i<=$#queries;$i++) { - $qresult.="$hashref->{$queries[$i]}&"; - } - if (untie(%$hashref)) { - $qresult=~s/\&$//; - Reply($client, "$qresult\n", $userinput); +# ---------------------------------------------------------------------- tmpput + } elsif ($userinput =~ /^tmpput/) { + if(isClient) { + my ($cmd,$what)=split(/:/,$userinput); + my $store; + $tmpsnum++; + my $id=$$.'_'.$clientip.'_'.$tmpsnum; + $id=~s/\W/\_/g; + $what=~s/\n//g; + my $execdir=$perlvar{'lonDaemons'}; + if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) { + print $store $what; + close $store; + print $client "$id\n"; + } + else { + print $client "error: ".($!+0) + ."IO::File->new Failed ". + "while attempting tmpput\n"; + } } else { - Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting idget\n",$userinput); + Reply($client, "refused\n", $userinput); + } - } else { - Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting idget\n",$userinput); - } - - return 1; -} - -RegisterHandler("idget", \&GetIdHandler, 0, 1, 0); -# -# Process the tmpput command I'm not sure what this does.. Seems to -# create a file in the lonDaemons/tmp directory of the form $id.tmp -# where Id is the client's ip concatenated with a sequence number. -# The file will contain some value that is passed in. Is this e.g. -# a login token? -# -# Parameters: -# $cmd - The command that got us dispatched. -# $tail - The remainder of the request following $cmd: -# In this case this will be the contents of the file. -# $client - Socket connected to the client. -# Returns: -# 1 indicating processing can continue. -# Side effects: -# A file is created in the local filesystem. -# A reply is sent to the client. -sub TmpPutHandler { - my $cmd = shift; - my $what = shift; - my $client = shift; - - my $userinput = "$cmd:$what"; # Reconstruct for logging. - - - my $store; - $tmpsnum++; - my $pid = $$; - my $id=$$.'_'.$clientip.'_'.$tmpsnum.'_'.$pid; - $id=~s/\W/\_/g; - $what=~s/\n//g; - my $execdir=$perlvar{'lonDaemons'}; - if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) { - print $store $what; - close $store; - Reply($client, "$id\n", $userinput); - } else { - Failure( $client, "error: ".($!+0)."IO::File->new Failed ". - "while attempting tmpput\n", $userinput); - } - return 1; - -} -RegisterHandler("tmpput", \&TmpPutHandler, 0, 1, 0); - -# Processes the tmpget command. This command returns the contents -# of a temporary resource file(?) created via tmpput. -# -# Paramters: -# $cmd - Command that got us dispatched. -# $id - Tail of the command, contain the id of the resource -# we want to fetch. -# $client - socket open on the client. -# Return: -# 1 - Inidcating processing can continue. -# Side effects: -# A reply is sent to the client. - -# -sub TmpGetHandler { - my $cmd = shift; - my $id = shift; - my $client = shift; - my $userinput = "$cmd:$id"; - - chomp($id); - $id=~s/\W/\_/g; - my $store; - my $execdir=$perlvar{'lonDaemons'}; - if ($store=IO::File->new("$execdir/tmp/$id.tmp")) { - my $reply=<$store>; - Reply( $client, "$reply\n", $userinput); - close $store; - } else { - Failure( $client, "error: ".($!+0)."IO::File->new Failed ". - "while attempting tmpget\n", $userinput); - } - - return 1; -} -RegisterHandler("tmpget", \&TmpGetHandler, 0, 1, 0); -# -# Process the tmpdel command. This command deletes a temp resource -# created by the tmpput command. -# -# Parameters: -# $cmd - Command that got us here. -# $id - Id of the temporary resource created. -# $client - socket open on the client process. -# -# Returns: -# 1 - Indicating processing should continue. -# Side Effects: -# A file is deleted -# A reply is sent to the client. -sub TmpDelHandler { - my $cmd = shift; - my $id = shift; - my $client = shift; - - my $userinput= "$cmd:$id"; - - chomp($id); - $id=~s/\W/\_/g; - my $execdir=$perlvar{'lonDaemons'}; - if (unlink("$execdir/tmp/$id.tmp")) { - Reply($client, "ok\n", $userinput); - } else { - Failure( $client, "error: ".($!+0)."Unlink tmp Failed ". - "while attempting tmpdel\n", $userinput); - } - - return 1; - -} -RegisterHandler("tmpdel", \&TmpDelHandler, 0, 1, 0); -# -# ls - list the contents of a directory. For each file in the -# selected directory the filename followed by the full output of -# the stat function is returned. The returned info for each -# file are separated by ':'. The stat fields are separated by &'s. -# Parameters: -# $cmd - The command that dispatched us (ls). -# $ulsdir - The directory path to list... I'm not sure what this -# is relative as things like ls:. return e.g. -# no_such_dir. -# $client - Socket open on the client. -# Returns: -# 1 - indicating that the daemon should not disconnect. -# Side Effects: -# The reply is written to $client. -# -sub LsHandler { - my $cmd = shift; - my $ulsdir = shift; - my $client = shift; - - my $userinput = "$cmd:$ulsdir"; - - my $ulsout=''; - my $ulsfn; - if (-e $ulsdir) { - if(-d $ulsdir) { - if (opendir(LSDIR,$ulsdir)) { - while ($ulsfn=readdir(LSDIR)) { - my @ulsstats=stat($ulsdir.'/'.$ulsfn); - $ulsout.=$ulsfn.'&'. - join('&',@ulsstats).':'; - } - closedir(LSDIR); + +# ---------------------------------------------------------------------- tmpget + } elsif ($userinput =~ /^tmpget/) { + if(isClient) { + my ($cmd,$id)=split(/:/,$userinput); + chomp($id); + $id=~s/\W/\_/g; + my $store; + my $execdir=$perlvar{'lonDaemons'}; + if ($store=IO::File->new("$execdir/tmp/$id.tmp")) { + my $reply=<$store>; + print $client "$reply\n"; + close $store; + } + else { + print $client "error: ".($!+0) + ."IO::File->new Failed ". + "while attempting tmpget\n"; } } else { - my @ulsstats=stat($ulsdir); - $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':'; + Reply($client, "refused\n", $userinput); + } - } else { - $ulsout='no_such_dir'; - } - if ($ulsout eq '') { $ulsout='empty'; } - Reply($client, "$ulsout\n", $userinput); - - - return 1; -} -RegisterHandler("ls", \&LsHandler, 0, 1, 0); - - -# -# Processes the setannounce command. This command -# creates a file named announce.txt in the top directory of -# the documentn root and sets its contents. The announce.txt file is -# printed in its entirety at the LonCAPA login page. Note: -# once the announcement.txt fileis created it cannot be deleted. -# However, setting the contents of the file to empty removes the -# announcement from the login page of loncapa so who cares. -# -# Parameters: -# $cmd - The command that got us dispatched. -# $announcement - The text of the announcement. -# $client - Socket open on the client process. -# Retunrns: -# 1 - Indicating request processing should continue -# Side Effects: -# The file {DocRoot}/announcement.txt is created. -# A reply is sent to $client. -# -sub SetAnnounceHandler { - my $cmd = shift; - my $announcement = shift; - my $client = shift; - - my $userinput = "$cmd:$announcement"; - - chomp($announcement); - $announcement=&unescape($announcement); - if (my $store=IO::File->new('>'.$perlvar{'lonDocRoot'}. - '/announcement.txt')) { - print $store $announcement; - close $store; - Reply($client, "ok\n", $userinput); - } else { - Failure($client, "error: ".($!+0)."\n", $userinput); - } - - return 1; -} -RegisterHandler("setannounce", \&SetAnnounceHandler, 0, 1, 0); - -# -# Return the version of the daemon. This can be used to determine -# the compatibility of cross version installations or, alternatively to -# simply know who's out of date and who isn't. Note that the version -# is returned concatenated with the tail. -# Parameters: -# $cmd - the request that dispatched to us. -# $tail - Tail of the request (client's version?). -# $client - Socket open on the client. -#Returns: -# 1 - continue processing requests. -# Side Effects: -# Replies with version to $client. -sub GetVersionHandler { - my $client = shift; - my $tail = shift; - my $client = shift; - my $userinput = $client; - - Reply($client, &version($userinput)."\n", $userinput); - - - return 1; -} -RegisterHandler("version", \&GetVersionHandler, 0, 1, 0); - -# Set the current host and domain. This is used to support -# multihomed systems. Each IP of the system, or even separate daemons -# on the same IP can be treated as handling a separate lonCAPA virtual -# machine. This command selects the virtual lonCAPA. The client always -# knows the right one since it is lonc and it is selecting the domain/system -# from the hosts.tab file. -# Parameters: -# $cmd - Command that dispatched us. -# $tail - Tail of the command (domain/host requested). -# $socket - Socket open on the client. -# -# Returns: -# 1 - Indicates the program should continue to process requests. -# Side-effects: -# The default domain/system context is modified for this daemon. -# a reply is sent to the client. -# -sub SelectHostHandler { - my $cmd = shift; - my $tail = shift; - my $socket = shift; - - my $userinput ="$cmd:$tail"; - - Reply($client, &sethost($userinput)."\n", $userinput); - - - return 1; -} -RegisterHandler("sethost", \&SelectHostHandler, 0, 1, 0); - -# Process a request to exit: -# - "bye" is sent to the client. -# - The client socket is shutdown and closed. -# - We indicate to the caller that we should exit. -# Formal Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (empty). -# $client - Socket open on the tail. -# Returns: -# 0 - Indicating the program should exit!! -# -sub ExitHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - &logthis("Client $clientip ($clientname) hanging up: $userinput"); - Reply($client, "bye\n", $userinput); - $client->shutdown(2); # shutdown the socket forcibly. - $client->close(); - - return 0; -} -RegisterHandler("exit", \&ExitHandler, 0, 1,1); -RegisterHandler("init", \&ExitHandler, 0, 1,1); # RE-init is like exit. -RegisterHandler("quit", \&ExitHandler, 0, 1,1); # I like this too! -#------------------------------------------------------------------------------------ -# -# Process a Request. Takes a request from the client validates -# it and performs the operation requested by it. Returns -# a response to the client. -# -# Parameters: -# request - A string containing the user's request. -# Returns: -# 0 - Requested to exit, caller should shut down. -# 1 - Accept additional requests from the client. -# -sub ProcessRequest { - my $Request = shift; - my $KeepGoing = 1; # Assume we're not asked to stop. - - my $wasenc=0; - my $userinput = $Request; # for compatibility with oldcode - - -# ------------------------------------------------------------ See if encrypted - - if($userinput =~ /^enc/) { - $wasenc = 1; - $userinput = Decipher($userinput); - if(! $userinput) { - Failure($client,"error:Encrypted data without negotiating key"); - return 0; # Break off with this imposter. +# ---------------------------------------------------------------------- tmpdel + } elsif ($userinput =~ /^tmpdel/) { + if(isClient) { + my ($cmd,$id)=split(/:/,$userinput); + chomp($id); + $id=~s/\W/\_/g; + my $execdir=$perlvar{'lonDaemons'}; + if (unlink("$execdir/tmp/$id.tmp")) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ."Unlink tmp Failed ". + "while attempting tmpdel\n"; + } + } else { + Reply($client, "refused\n", $userinput); + } - } - # Split off the request keyword from the rest of the stuff. - - my ($command, $tail) = split(/:/, $userinput, 2); - - Debug("Command received: $command, encoded = $wasenc"); - - -# ------------------------------------------------------------- Normal commands - - # - # If the command is in the hash, then execute it via the hash dispatch: - # - if(defined $Dispatcher{$command}) { - - my $DispatchInfo = $Dispatcher{$command}; - my $Handler = $$DispatchInfo[0]; - my $NeedEncode = $$DispatchInfo[1]; - my $ClientTypes = $$DispatchInfo[2]; - Debug("Matched dispatch hash: mustencode: $NeedEncode ClientType $ClientTypes"); - - # Validate the request: - - my $ok = 1; - my $requesterprivs = 0; - if(isClient()) { - $requesterprivs |= $CLIENT_OK; +# ----------------------------------------- portfolio directory list (portls) + } elsif ($userinput =~ /^portls/) { + if(isClient) { + my ($cmd,$uname,$udom)=split(/:/,$userinput); + my $udir=propath($udom,$uname).'/userfiles/portfolio'; + my $dirLine=''; + my $dirContents=''; + if (opendir(LSDIR,$udir.'/')){ + while ($dirLine = readdir(LSDIR)){ + $dirContents = $dirContents.$dirLine.'
'; + } + } else { + $dirContents = "No directory found\n"; + } + print $client $dirContents."\n"; + } else { + Reply($client, "refused\n", $userinput); } - if(isManager()) { - $requesterprivs |= $MANAGER_OK; +# -------------------------------------------------------------------------- ls + } elsif ($userinput =~ /^ls/) { + if(isClient) { + my $obs; + my $rights; + my ($cmd,$ulsdir)=split(/:/,$userinput); + my $ulsout=''; + my $ulsfn; + if (-e $ulsdir) { + if(-d $ulsdir) { + if (opendir(LSDIR,$ulsdir)) { + while ($ulsfn=readdir(LSDIR)) { + undef $obs, $rights; + my @ulsstats=stat($ulsdir.'/'.$ulsfn); + #We do some obsolete checking here + if(-e $ulsdir.'/'.$ulsfn.".meta") { + open(FILE, $ulsdir.'/'.$ulsfn.".meta"); + my @obsolete=; + foreach my $obsolete (@obsolete) { + if($obsolete =~ m|()(on)|) { $obs = 1; } + if($obsolete =~ m|()(default)|) { $rights = 1; } + } + } + $ulsout.=$ulsfn.'&'.join('&',@ulsstats); + if($obs eq '1') { $ulsout.="&1"; } + else { $ulsout.="&0"; } + if($rights eq '1') { $ulsout.="&1:"; } + else { $ulsout.="&0:"; } + } + closedir(LSDIR); + } + } else { + my @ulsstats=stat($ulsdir); + $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':'; + } + } else { + $ulsout='no_such_dir'; + } + if ($ulsout eq '') { $ulsout='empty'; } + print $client "$ulsout\n"; + } else { + Reply($client, "refused\n", $userinput); + } - if($NeedEncode && (!$wasenc)) { - Debug("Must encode but wasn't: $NeedEncode $wasenc"); - $ok = 0; +# ----------------------------------------------------------------- setannounce + } elsif ($userinput =~ /^setannounce/) { + if (isClient) { + my ($cmd,$announcement)=split(/:/,$userinput); + chomp($announcement); + $announcement=&unescape($announcement); + if (my $store=IO::File->new('>'.$perlvar{'lonDocRoot'}. + '/announcement.txt')) { + print $store $announcement; + close $store; + print $client "ok\n"; + } else { + print $client "error: ".($!+0)."\n"; + } + } else { + Reply($client, "refused\n", $userinput); + } - if(($ClientTypes & $requesterprivs) == 0) { - Debug("Client not privileged to do this operation"); - $ok = 0; +# ------------------------------------------------------------------ Hanging up + } elsif (($userinput =~ /^exit/) || + ($userinput =~ /^init/)) { # no restrictions. + &logthis( + "Client $clientip ($clientname) hanging up: $userinput"); + print $client "bye\n"; + $client->shutdown(2); # shutdown the socket forcibly. + $client->close(); + return 0; + +# ---------------------------------- set current host/domain + } elsif ($userinput =~ /^sethost:/) { + if (isClient) { + print $client &sethost($userinput)."\n"; + } else { + print $client "refused\n"; } - - if($ok) { - Debug("Dispatching to handler $command $tail"); - $KeepGoing = &$Handler($command, $tail, $client); +#---------------------------------- request file (?) version. + } elsif ($userinput =~/^version:/) { + if (isClient) { + print $client &version($userinput)."\n"; } else { - Debug("Refusing to dispatch because ok is false"); - Failure($client, "refused", $userinput); + print $client "refused\n"; } - - -# ------------------------------------------------------------- unknown command - - } else { - # unknown command - Failure($client, "unknown_cmd\n", $userinput); - } - - return $KeepGoing; -} - - -# -# GetCertificate: Given a transaction that requires a certificate, -# this function will extract the certificate from the transaction -# request. Note that at this point, the only concept of a certificate -# is the hostname to which we are connected. -# -# Parameter: -# request - The request sent by our client (this parameterization may -# need to change when we really use a certificate granting -# authority. -# -sub GetCertificate { - my $request = shift; - - return $clientip; -} - - - -# -# ReadManagerTable: Reads in the current manager table. For now this is -# done on each manager authentication because: -# - These authentications are not frequent -# - This allows dynamic changes to the manager table -# without the need to signal to the lond. -# - -sub ReadManagerTable { - - # Clean out the old table first.. - - foreach my $key (keys %managers) { - delete $managers{$key}; - } - - my $tablename = $perlvar{'lonTabDir'}."/managers.tab"; - if (!open (MANAGERS, $tablename)) { - logthis('No manager table. Nobody can manage!!'); - return; - } - while(my $host = ) { - chomp($host); - if ($host =~ "^#") { # Comment line. - logthis(' Skipping line: '. "$host\n"); - next; +#------------------------------- is auto-enrollment enabled? + } elsif ($userinput =~/^autorun:/) { + if (isClient) { + my ($cmd,$cdom) = split(/:/,$userinput); + my $outcome = &localenroll::run($cdom); + print $client "$outcome\n"; + } else { + print $client "0\n"; } - if (!defined $hostip{$host}) { # This is a non cluster member - # The entry is of the form: - # cluname:hostname - # cluname - A 'cluster hostname' is needed in order to negotiate - # the host key. - # hostname- The dns name of the host. - # - my($cluname, $dnsname) = split(/:/, $host); - - my $ip = gethostbyname($dnsname); - if(defined($ip)) { # bad names don't deserve entry. - my $hostip = inet_ntoa($ip); - $managers{$hostip} = $cluname; - logthis(' registering manager '. - "$dnsname as $cluname with $hostip \n"); - } +#------------------------------- get official sections (for auto-enrollment). + } elsif ($userinput =~/^autogetsections:/) { + if (isClient) { + my ($cmd,$coursecode,$cdom)=split(/:/,$userinput); + my @secs = &localenroll::get_sections($coursecode,$cdom); + my $seclist = &escape(join(':',@secs)); + print $client "$seclist\n"; } else { - logthis(' existing host'." $host\n"); - $managers{$hostip{$host}} = $host; # Use info from cluster tab if clumemeber + print $client "refused\n"; } - } -} - -# -# ValidManager: Determines if a given certificate represents a valid manager. -# in this primitive implementation, the 'certificate' is -# just the connecting loncapa client name. This is checked -# against a valid client list in the configuration. -# -# -sub ValidManager { - my $certificate = shift; - - return isManager; -} -# -# CopyFile: Called as part of the process of installing a -# new configuration file. This function copies an existing -# file to a backup file. -# Parameters: -# oldfile - Name of the file to backup. -# newfile - Name of the backup file. -# Return: -# 0 - Failure (errno has failure reason). -# 1 - Success. -# -sub CopyFile { - my $oldfile = shift; - my $newfile = shift; - - # The file must exist: - - if(-e $oldfile) { - - # Read the old file. - - my $oldfh = IO::File->new("< $oldfile"); - if(!$oldfh) { - return 0; +#----------------------- validate owner of new course section (for auto-enrollment). + } elsif ($userinput =~/^autonewcourse:/) { + if (isClient) { + my ($cmd,$inst_course_id,$owner,$cdom)=split(/:/,$userinput); + my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom); + print $client "$outcome\n"; + } else { + print $client "refused\n"; } - my @contents = <$oldfh>; # Suck in the entire file. - - # write the backup file: - - my $newfh = IO::File->new("> $newfile"); - if(!(defined $newfh)){ - return 0; +#-------------- validate course section in schedule of classes (for auto-enrollment). + } elsif ($userinput =~/^autovalidatecourse:/) { + if (isClient) { + my ($cmd,$inst_course_id,$cdom)=split(/:/,$userinput); + my $outcome=&localenroll::validate_courseID($inst_course_id,$cdom); + print $client "$outcome\n"; + } else { + print $client "refused\n"; } - my $lines = scalar @contents; - for (my $i =0; $i < $lines; $i++) { - print $newfh ($contents[$i]); +#--------------------------- create password for new user (for auto-enrollment). + } elsif ($userinput =~/^autocreatepassword:/) { + if (isClient) { + my ($cmd,$authparam,$cdom)=split(/:/,$userinput); + my ($create_passwd,$authchk); + ($authparam,$create_passwd,$authchk) = &localenroll::create_password($authparam,$cdom); + print $client &escape($authparam.':'.$create_passwd.':'.$authchk)."\n"; + } else { + print $client "refused\n"; } - - $oldfh->close; - $newfh->close; - - chmod(0660, $newfile); - - return 1; - - } else { - return 0; - } -} -# -# Host files are passed out with externally visible host IPs. -# If, for example, we are behind a fire-wall or NAT host, our -# internally visible IP may be different than the externally -# visible IP. Therefore, we always adjust the contents of the -# host file so that the entry for ME is the IP that we believe -# we have. At present, this is defined as the entry that -# DNS has for us. If by some chance we are not able to get a -# DNS translation for us, then we assume that the host.tab file -# is correct. -# BUGBUGBUG - in the future, we really should see if we can -# easily query the interface(s) instead. -# Parameter(s): -# contents - The contents of the host.tab to check. -# Returns: -# newcontents - The adjusted contents. -# -# -sub AdjustHostContents { - my $contents = shift; - my $adjusted; - my $me = $perlvar{'lonHostID'}; - - foreach my $line (split(/\n/,$contents)) { - if(!(($line eq "") || ($line =~ /^ *\#/) || ($line =~ /^ *$/))) { - chomp($line); - my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon)=split(/:/,$line); - if ($id eq $me) { - my $ip = gethostbyname($name); - my $ipnew = inet_ntoa($ip); - $ip = $ipnew; - # Reconstruct the host line and append to adjusted: - - my $newline = "$id:$domain:$role:$name:$ip"; - if($maxcon ne "") { # Not all hosts have loncnew tuning params - $newline .= ":$maxcon:$idleto:$mincon"; +#--------------------------- read and remove temporary files (for auto-enrollment). + } elsif ($userinput =~/^autoretrieve:/) { + if (isClient) { + my ($cmd,$filename) = split(/:/,$userinput); + my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename; + if ( (-e $source) && ($filename ne '') ) { + my $reply = ''; + if (open(my $fh,$source)) { + while (<$fh>) { + chomp($_); + $_ =~ s/^\s+//g; + $_ =~ s/\s+$//g; + $reply .= $_; + } + close($fh); + print $client &escape($reply)."\n"; +# unlink($source); + } else { + print $client "error\n"; } - $adjusted .= $newline."\n"; - - } else { # Not me, pass unmodified. - $adjusted .= $line."\n"; + } else { + print $client "error\n"; } - } else { # Blank or comment never re-written. - $adjusted .= $line."\n"; # Pass blanks and comments as is. + } else { + print $client "refused\n"; } +#--------------------- read and retrieve institutional code format (for support form). + } elsif ($userinput =~/^autoinstcodeformat:/) { + if (isClient) { + my $reply; + my($cmd,$cdom,$course) = split(/:/,$userinput); + my @pairs = split/\&/,$course; + my %instcodes = (); + my %codes = (); + my @codetitles = (); + my %cat_titles = (); + my %cat_order = (); + foreach (@pairs) { + my ($key,$value) = split/=/,$_; + $instcodes{&unescape($key)} = &unescape($value); + } + my $formatreply = &localenroll::instcode_format($cdom,\%instcodes,\%codes,\@codetitles,\%cat_titles,\%cat_order); + if ($formatreply eq 'ok') { + my $codes_str = &hash2str(%codes); + my $codetitles_str = &array2str(@codetitles); + my $cat_titles_str = &hash2str(%cat_titles); + my $cat_order_str = &hash2str(%cat_order); + print $client $codes_str.':'.$codetitles_str.':'.$cat_titles_str.':'.$cat_order_str."\n"; + } + } else { + print $client "refused\n"; + } +# ------------------------------------------------------------- unknown command + + } else { + # unknown command + print $client "unknown_cmd\n"; } - return $adjusted; -} -# -# InstallFile: Called to install an administrative file: -# - The file is created with .tmp -# - The .tmp file is then mv'd to -# This lugubrious procedure is done to ensure that we are never without -# a valid, even if dated, version of the file regardless of who crashes -# and when the crash occurs. -# -# Parameters: -# Name of the file -# File Contents. -# Return: -# nonzero - success. -# 0 - failure and $! has an errno. -# -sub InstallFile { - my $Filename = shift; - my $Contents = shift; - my $TempFile = $Filename.".tmp"; - - # Open the file for write: - - my $fh = IO::File->new("> $TempFile"); # Write to temp. - if(!(defined $fh)) { - &logthis(' Unable to create '.$TempFile.""); - return 0; - } - # write the contents of the file: - - print $fh ($Contents); - $fh->close; # In case we ever have a filesystem w. locking - - chmod(0660, $TempFile); - - # Now we can move install the file in position. - - move($TempFile, $Filename); - +# -------------------------------------------------------------------- complete + Debug("process_request - returning 1"); return 1; } # -# ConfigFileFromSelector: converts a configuration file selector -# (one of host or domain at this point) into a -# configuration file pathname. -# +# Decipher encoded traffic # Parameters: -# selector - Configuration file selector. -# Returns: -# Full path to the file or undef if the selector is invalid. -# -sub ConfigFileFromSelector { - my $selector = shift; - my $tablefile; - - my $tabledir = $perlvar{'lonTabDir'}.'/'; - if ($selector eq "hosts") { - $tablefile = $tabledir."hosts.tab"; - } elsif ($selector eq "domain") { - $tablefile = $tabledir."domain.tab"; - } else { - return undef; - } - return $tablefile; - -} -# -# PushFile: Called to do an administrative push of a file. -# - Ensure the file being pushed is one we support. -# - Backup the old file to -# - Separate the contents of the new file out from the -# rest of the request. -# - Write the new file. -# Parameter: -# Request - The entire user request. This consists of a : separated -# string pushfile:tablename:contents. -# NOTE: The contents may have :'s in it as well making things a bit -# more interesting... but not much. +# input - Encoded data. # Returns: -# String to send to client ("ok" or "refused" if bad file). +# Decoded data or undef if encryption key was not yet negotiated. +# Implicit input: +# cipher - This global holds the negotiated encryption key. # -sub PushFile { - my $request = shift; - my ($command, $filename, $contents) = split(":", $request, 3); +sub decipher { + my ($input) = @_; + my $output = ''; - # At this point in time, pushes for only the following tables are - # supported: - # hosts.tab ($filename eq host). - # domain.tab ($filename eq domain). - # Construct the destination filename or reject the request. - # - # lonManage is supposed to ensure this, however this session could be - # part of some elaborate spoof that managed somehow to authenticate. - # - - - my $tablefile = ConfigFileFromSelector($filename); - if(! (defined $tablefile)) { - return "refused"; - } - # - # >copy< the old table to the backup table - # don't rename in case system crashes/reboots etc. in the time - # window between a rename and write. - # - my $backupfile = $tablefile; - $backupfile =~ s/\.tab$/.old/; - if(!CopyFile($tablefile, $backupfile)) { - &logthis(' CopyFile from '.$tablefile." to ".$backupfile." failed "); - return "error:$!"; - } - &logthis(' Pushfile: backed up ' - .$tablefile." to $backupfile"); - # If the file being pushed is the host file, we adjust the entry for ourself so that the - # IP will be our current IP as looked up in dns. Note this is only 99% good as it's possible - # to conceive of conditions where we don't have a DNS entry locally. This is possible in a - # network sense but it doesn't make much sense in a LonCAPA sense so we ignore (for now) - # that possibilty. - - if($filename eq "host") { - $contents = AdjustHostContents($contents); - } - - # Install the new file: - - if(!InstallFile($tablefile, $contents)) { - &logthis(' Pushfile: unable to install ' - .$tablefile." $! "); - return "error:$!"; - } else { - &logthis(' Installed new '.$tablefile - .""); - - } - - - # Indicate success: - - return "ok"; - -} - -# -# Called to re-init either lonc or lond. -# -# Parameters: -# request - The full request by the client. This is of the form -# reinit: -# where is allowed to be either of -# lonc or lond -# -# Returns: -# The string to be sent back to the client either: -# ok - Everything worked just fine. -# error:why - There was a failure and why describes the reason. -# -# -sub ReinitProcess { - my $request = shift; - - - # separate the request (reinit) from the process identifier and - # validate it producing the name of the .pid file for the process. - # - # - my ($junk, $process) = split(":", $request); - my $processpidfile = $perlvar{'lonDaemons'}.'/logs/'; - if($process eq 'lonc') { - $processpidfile = $processpidfile."lonc.pid"; - if (!open(PIDFILE, "< $processpidfile")) { - return "error:Open failed for $processpidfile"; + if($cipher) { + my($enc, $enclength, $encinput) = split(/:/, $input); + for(my $encidx = 0; $encidx < length($encinput); $encidx += 16) { + $output .= + $cipher->decrypt(pack("H16", substr($encinput, $encidx, 16))); } - my $loncpid = ; - close(PIDFILE); - logthis(' Reinitializing lonc pid='.$loncpid - .""); - kill("USR2", $loncpid); - } elsif ($process eq 'lond') { - logthis(' Reinitializing self (lond) '); - &UpdateHosts; # Lond is us!! + return substr($output, 0, $enclength); } else { - &logthis('"); - return "error:Invalid process identifier $process"; + return undef; } - return 'ok'; } -# Validate a line in a configuration file edit script: -# Validation includes: -# - Ensuring the command is valid. -# - Ensuring the command has sufficient parameters -# Parameters: -# scriptline - A line to validate (\n has been stripped for what it's worth). -# -# Return: -# 0 - Invalid scriptline. -# 1 - Valid scriptline -# NOTE: -# Only the command syntax is checked, not the executability of the -# command. -# -sub isValidEditCommand { - my $scriptline = shift; - # Line elements are pipe separated: - - my ($command, $key, $newline) = split(/\|/, $scriptline); - &logthis(' isValideditCommand checking: '. - "Command = '$command', Key = '$key', Newline = '$newline' \n"); - - if ($command eq "delete") { - # - # key with no newline. - # - if( ($key eq "") || ($newline ne "")) { - return 0; # Must have key but no newline. - } else { - return 1; # Valid syntax. - } - } elsif ($command eq "replace") { - # - # key and newline: - # - if (($key eq "") || ($newline eq "")) { - return 0; - } else { - return 1; - } - } elsif ($command eq "append") { - if (($key ne "") && ($newline eq "")) { - return 1; - } else { - return 0; - } - } else { - return 0; # Invalid command. - } - return 0; # Should not get here!!! -} # -# ApplyEdit - Applies an edit command to a line in a configuration -# file. It is the caller's responsiblity to validate the -# edit line. +# Register a command processor. This function is invoked to register a sub +# to process a request. Once registered, the ProcessRequest sub can automatically +# dispatch requests to an appropriate sub, and do the top level validity checking +# as well: +# - Is the keyword recognized. +# - Is the proper client type attempting the request. +# - Is the request encrypted if it has to be. # Parameters: -# $directive - A single edit directive to apply. -# Edit directives are of the form: -# append|newline - Appends a new line to the file. -# replace|key|newline - Replaces the line with key value 'key' -# delete|key - Deletes the line with key value 'key'. -# $editor - A config file editor object that contains the -# file being edited. +# $request_name - Name of the request being registered. +# This is the command request that will match +# against the hash keywords to lookup the information +# associated with the dispatch information. +# $procedure - Reference to a sub to call to process the request. +# All subs get called as follows: +# Procedure($cmd, $tail, $replyfd, $key) +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $replyfd- File descriptor connected to the client +# $must_encode - True if the request must be encoded to be good. +# $client_ok - True if it's ok for a client to request this. +# $manager_ok - True if it's ok for a manager to request this. +# Side effects: +# - On success, the Dispatcher hash has an entry added for the key $RequestName +# - On failure, the program will die as it's a bad internal bug to try to +# register a duplicate command handler. # -sub ApplyEdit { - my $directive = shift; - my $editor = shift; - - # Break the directive down into its command and its parameters - # (at most two at this point. The meaning of the parameters, if in fact - # they exist depends on the command). - - my ($command, $p1, $p2) = split(/\|/, $directive); +sub register_handler { + my ($request_name,$procedure,$must_encode, $client_ok,$manager_ok) = @_; - if($command eq "append") { - $editor->Append($p1); # p1 - key p2 null. - } elsif ($command eq "replace") { - $editor->ReplaceLine($p1, $p2); # p1 - key p2 = newline. - } elsif ($command eq "delete") { - $editor->DeleteLine($p1); # p1 - key p2 null. - } else { # Should not get here!!! - die "Invalid command given to ApplyEdit $command"; + # Don't allow duplication# + + if (defined $Dispatcher{$request_name}) { + die "Attempting to define a duplicate request handler for $request_name\n"; } -} -# -# AdjustOurHost: -# Adjusts a host file stored in a configuration file editor object -# for the true IP address of this host. This is necessary for hosts -# that live behind a firewall. -# Those hosts have a publicly distributed IP of the firewall, but -# internally must use their actual IP. We assume that a given -# host only has a single IP interface for now. -# Formal Parameters: -# editor - The configuration file editor to adjust. This -# editor is assumed to contain a hosts.tab file. -# Strategy: -# - Figure out our hostname. -# - Lookup the entry for this host. -# - Modify the line to contain our IP -# - Do a replace for this host. -sub AdjustOurHost { - my $editor = shift; - - # figure out who I am. - - my $myHostName = $perlvar{'lonHostID'}; # LonCAPA hostname. - - # Get my host file entry. - - my $ConfigLine = $editor->Find($myHostName); - if(! (defined $ConfigLine)) { - die "AdjustOurHost - no entry for me in hosts file $myHostName"; + # Build the client type mask: + + my $client_type_mask = 0; + if($client_ok) { + $client_type_mask |= $CLIENT_OK; } - # figure out my IP: - # Use the config line to get my hostname. - # Use gethostbyname to translate that into an IP address. - # - my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon) = split(/:/,$ConfigLine); - my $BinaryIp = gethostbyname($name); - my $ip = inet_ntoa($ip); - # - # Reassemble the config line from the elements in the list. - # Note that if the loncnew items were not present before, they will - # be now even if they would be empty - # - my $newConfigLine = $id; - foreach my $item ($domain, $role, $name, $ip, $maxcon, $idleto, $mincon) { - $newConfigLine .= ":".$item; + if($manager_ok) { + $client_type_mask |= $MANAGER_OK; } - # Replace the line: - - $editor->ReplaceLine($id, $newConfigLine); - -} -# -# ReplaceConfigFile: -# Replaces a configuration file with the contents of a -# configuration file editor object. -# This is done by: -# - Copying the target file to .old -# - Writing the new file to .tmp -# - Moving -> -# This laborious process ensures that the system is never without -# a configuration file that's at least valid (even if the contents -# may be dated). -# Parameters: -# filename - Name of the file to modify... this is a full path. -# editor - Editor containing the file. -# -sub ReplaceConfigFile { - my $filename = shift; - my $editor = shift; - - CopyFile ($filename, $filename.".old"); - - my $contents = $editor->Get(); # Get the contents of the file. - - InstallFile($filename, $contents); + + # Enter the hash: + + my @entry = ($procedure, $must_encode, $client_type_mask); + + $Dispatcher{$request_name} = \@entry; + } -# -# -# Called to edit a configuration table file -# Parameters: -# request - The entire command/request sent by lonc or lonManage -# Return: -# The reply to send to the client. -# -sub EditFile { - my $request = shift; - # Split the command into it's pieces: edit:filetype:script - my ($request, $filetype, $script) = split(/:/, $request,3); # : in script +#------------------------------------------------------------------ - # Check the pre-coditions for success: - if($request != "edit") { # Something is amiss afoot alack. - return "error:edit request detected, but request != 'edit'\n"; - } - if( ($filetype ne "hosts") && - ($filetype ne "domain")) { - return "error:edit requested with invalid file specifier: $filetype \n"; - } - # Split the edit script and check it's validity. - my @scriptlines = split(/\n/, $script); # one line per element. - my $linecount = scalar(@scriptlines); - for(my $i = 0; $i < $linecount; $i++) { - chomp($scriptlines[$i]); - if(!isValidEditCommand($scriptlines[$i])) { - return "error:edit with bad script line: '$scriptlines[$i]' \n"; - } - } - - # Execute the edit operation. - # - Create a config file editor for the appropriate file and - # - execute each command in the script: - # - my $configfile = ConfigFileFromSelector($filetype); - if (!(defined $configfile)) { - return "refused\n"; - } - my $editor = ConfigFileEdit->new($configfile); - - for (my $i = 0; $i < $linecount; $i++) { - ApplyEdit($scriptlines[$i], $editor); - } - # If the file is the host file, ensure that our host is - # adjusted to have our ip: - # - if($filetype eq "host") { - AdjustOurHost($editor); - } - # Finally replace the current file with our file. - # - ReplaceConfigFile($configfile, $editor); - - return "ok\n"; -} # # Convert an error return code from lcpasswd to a string value. # @@ -3356,22 +3154,22 @@ sub catchexception { $SIG{'QUIT'}='DEFAULT'; $SIG{__DIE__}='DEFAULT'; &status("Catching exception"); - &logthis("CRITICAL: " - ."ABNORMAL EXIT. Child $$ for server $thisserver died through " - ."a crash with this error msg->[$error]"); + &logthis("CRITICAL: " + ."ABNORMAL EXIT. Child $$ for server $thisserver died through " + ."a crash with this error msg->[$error]"); &logthis('Famous last words: '.$status.' - '.$lastlog); if ($client) { print $client "error: $error\n"; } $server->close(); die($error); } - sub timeout { &status("Handling Timeout"); - &logthis("CRITICAL: TIME OUT ".$$.""); + &logthis("CRITICAL: TIME OUT ".$$.""); &catchexception('Timeout'); } # -------------------------------- Set signal handlers to record abnormal exits + $SIG{'QUIT'}=\&catchexception; $SIG{__DIE__}=\&catchexception; @@ -3384,11 +3182,11 @@ undef $perlvarref; # ----------------------------- Make sure this process is running from user=www my $wwwid=getpwnam('www'); if ($wwwid!=$<) { - my $emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}"; - my $subj="LON: $currenthostid User ID mismatch"; - system("echo 'User ID mismatch. lond must be run as user www.' |\ + my $emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}"; + my $subj="LON: $currenthostid User ID mismatch"; + system("echo 'User ID mismatch. lond must be run as user www.' |\ mailto $emailto -s '$subj' > /dev/null"); - exit 1; + exit 1; } # --------------------------------------------- Check if other instance running @@ -3396,10 +3194,10 @@ if ($wwwid!=$<) { my $pidfile="$perlvar{'lonDaemons'}/logs/lond.pid"; if (-e $pidfile) { - my $lfh=IO::File->new("$pidfile"); - my $pide=<$lfh>; - chomp($pide); - if (kill 0 => $pide) { die "already running"; } + my $lfh=IO::File->new("$pidfile"); + my $pide=<$lfh>; + chomp($pide); + if (kill 0 => $pide) { die "already running"; } } # ------------------------------------------------------------- Read hosts file @@ -3412,25 +3210,33 @@ $server = IO::Socket::INET->new(LocalPor Proto => 'tcp', Reuse => 1, Listen => 10 ) - or die "making socket: $@\n"; + or die "making socket: $@\n"; # --------------------------------------------------------- Do global variables # global variables my %children = (); # keys are current child process IDs -my $children = 0; # current number of children sub REAPER { # takes care of dead children $SIG{CHLD} = \&REAPER; &status("Handling child death"); - my $pid = wait; - if (defined($children{$pid})) { - &logthis("Child $pid died"); - $children --; - delete $children{$pid}; - } else { - &logthis("Unknown Child $pid died"); + my $pid; + do { + $pid = waitpid(-1,&WNOHANG()); + if (defined($children{$pid})) { + &logthis("Child $pid died"); + delete($children{$pid}); + } elsif ($pid > 0) { + &logthis("Unknown Child $pid died"); + } + } while ( $pid > 0 ); + foreach my $child (keys(%children)) { + $pid = waitpid($child,&WNOHANG()); + if ($pid > 0) { + &logthis("Child $child - $pid looks like we missed it's death"); + delete($children{$pid}); + } } &status("Finished Handling child death"); } @@ -3442,7 +3248,7 @@ sub HUNTSMAN { # si &logthis("Free socket: ".shutdown($server,2)); # free up socket my $execdir=$perlvar{'lonDaemons'}; unlink("$execdir/logs/lond.pid"); - &logthis("CRITICAL: Shutting down"); + &logthis("CRITICAL: Shutting down"); &status("Done killing children"); exit; # clean up with dignity } @@ -3452,7 +3258,7 @@ sub HUPSMAN { # sig &status("Killing children for restart (HUP)"); kill 'INT' => keys %children; &logthis("Free socket: ".shutdown($server,2)); # free up socket - &logthis("CRITICAL: Restarting"); + &logthis("CRITICAL: Restarting"); my $execdir=$perlvar{'lonDaemons'}; unlink("$execdir/logs/lond.pid"); &status("Restarting self (HUP)"); @@ -3462,7 +3268,7 @@ sub HUPSMAN { # sig # # Kill off hashes that describe the host table prior to re-reading it. # Hashes affected are: -# %hostid, %hostdom %hostip +# %hostid, %hostdom %hostip %hostdns. # sub KillHostHashes { foreach my $key (keys %hostid) { @@ -3474,6 +3280,9 @@ sub KillHostHashes { foreach my $key (keys %hostip) { delete $hostip{$key}; } + foreach my $key (keys %hostdns) { + delete $hostdns{$key}; + } } # # Read in the host table from file and distribute it into the various hashes: @@ -3484,14 +3293,22 @@ sub KillHostHashes { sub ReadHostTable { open (CONFIG,"$perlvar{'lonTabDir'}/hosts.tab") || die "Can't read host file"; - + my $myloncapaname = $perlvar{'lonHostID'}; + Debug("My loncapa name is : $myloncapaname"); while (my $configline=) { - my ($id,$domain,$role,$name,$ip)=split(/:/,$configline); - chomp($ip); $ip=~s/\D+$//; - $hostid{$ip}=$id; - $hostdom{$id}=$domain; - $hostip{$id}=$ip; - if ($id eq $perlvar{'lonHostID'}) { $thisserver=$name; } + if (!($configline =~ /^\s*\#/)) { + my ($id,$domain,$role,$name,$ip)=split(/:/,$configline); + chomp($ip); $ip=~s/\D+$//; + $hostid{$ip}=$id; # LonCAPA name of host by IP. + $hostdom{$id}=$domain; # LonCAPA domain name of host. + $hostip{$id}=$ip; # IP address of host. + $hostdns{$name} = $id; # LonCAPA name of host by DNS. + + if ($id eq $perlvar{'lonHostID'}) { + Debug("Found me in the host table: $name"); + $thisserver=$name; + } + } } close(CONFIG); } @@ -3553,34 +3370,38 @@ sub checkchildren { &logthis('Going to check on the children'); my $docdir=$perlvar{'lonDocRoot'}; foreach (sort keys %children) { - sleep 1; + #sleep 1; unless (kill 'USR1' => $_) { &logthis ('Child '.$_.' is dead'); &logstatus($$.' is dead'); + delete($children{$_}); } } sleep 5; - $SIG{ALRM} = sub { die "timeout" }; + $SIG{ALRM} = sub { Debug("timeout"); + die "timeout"; }; $SIG{__DIE__} = 'DEFAULT'; &status("Checking on the children (waiting for reports)"); foreach (sort keys %children) { unless (-e "$docdir/lon-status/londchld/$_.txt") { - eval { - alarm(300); - &logthis('Child '.$_.' did not respond'); - kill 9 => $_; - #$emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}"; - #$subj="LON: $currenthostid killed lond process $_"; - #my $result=`echo 'Killed lond process $_.' | mailto $emailto -s '$subj' > /dev/null`; - #$execdir=$perlvar{'lonDaemons'}; - #$result=`/bin/cp $execdir/logs/lond.log $execdir/logs/lond.log.$_`; - alarm(0); - } + eval { + alarm(300); + &logthis('Child '.$_.' did not respond'); + kill 9 => $_; + #$emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}"; + #$subj="LON: $currenthostid killed lond process $_"; + #my $result=`echo 'Killed lond process $_.' | mailto $emailto -s '$subj' > /dev/null`; + #$execdir=$perlvar{'lonDaemons'}; + #$result=`/bin/cp $execdir/logs/lond.log $execdir/logs/lond.log.$_`; + delete($children{$_}); + alarm(0); + } } } $SIG{ALRM} = 'DEFAULT'; $SIG{__DIE__} = \&catchexception; &status("Finished checking children"); + &logthis('Finished Checking children'); } # --------------------------------------------------------------------- Logging @@ -3611,22 +3432,17 @@ sub Debug { # reply - Text to send to client. # request - Original request from client. # -# Note: This increments Transactions -# sub Reply { - alarm(120); - my $fd = shift; - my $reply = shift; - my $request = shift; - + my ($fd, $reply, $request) = @_; print $fd $reply; Debug("Request was $request Reply was $reply"); $Transactions++; - alarm(0); } + + # # Sub to report a failure. # This function: @@ -3656,19 +3472,20 @@ sub logstatus { &status("Doing logging"); my $docdir=$perlvar{'lonDocRoot'}; { - my $fh=IO::File->new(">>$docdir/lon-status/londstatus.txt"); - print $fh $$."\t".$currenthostid."\t".$status."\t".$lastlog."\n"; - $fh->close(); + my $fh=IO::File->new(">$docdir/lon-status/londchld/$$.txt"); + print $fh $status."\n".$lastlog."\n".time."\n$keymode"; + $fh->close(); } - &status("Finished londstatus.txt"); + &status("Finished $$.txt"); { - my $fh=IO::File->new(">$docdir/lon-status/londchld/$$.txt"); - print $fh $status."\n".$lastlog."\n".time; - $fh->close(); + open(LOG,">>$docdir/lon-status/londstatus.txt"); + flock(LOG,LOCK_EX); + print LOG $$."\t".$clientname."\t".$currenthostid."\t" + .$status."\t".$lastlog."\t $keymode\n"; + flock(DB,LOCK_UN); + close(LOG); } - ResetStatistics; &status("Finished logging"); - } sub initnewstatus { @@ -3690,11 +3507,8 @@ sub status { my $what=shift; my $now=time; my $local=localtime($now); - my $status = "lond: $what $local "; - if($Transactions) { - $status .= " Transactions: $Transactions Failed; $Failures"; - } - $0=$status; + $status=$local.': '.$what; + $0='lond: '.$what.' '.$local; } # -------------------------------------------------------- Escape Special Chars @@ -3726,11 +3540,12 @@ sub reconlonc { &logthis("lonc at pid $loncpid responding, sending USR1"); kill USR1 => $loncpid; } else { - &logthis("CRITICAL: " - ."lonc at pid $loncpid not responding, giving up"); + &logthis( + "CRITICAL: " + ."lonc at pid $loncpid not responding, giving up"); } } else { - &logthis('CRITICAL: lonc not running, giving up'); + &logthis('CRITICAL: lonc not running, giving up'); } } @@ -3742,7 +3557,7 @@ sub subreply { my $sclient=IO::Socket::UNIX->new(Peer =>"$peerfile", Type => SOCK_STREAM, Timeout => 10) - or return "con_lost"; + or return "con_lost"; print $sclient "$cmd\n"; my $answer=<$sclient>; chomp($answer); @@ -3751,22 +3566,22 @@ sub subreply { } sub reply { - my ($cmd,$server)=@_; - my $answer; - if ($server ne $currenthostid) { - $answer=subreply($cmd,$server); - if ($answer eq 'con_lost') { - $answer=subreply("ping",$server); - if ($answer ne $server) { - &logthis("sub reply: answer != server answer is $answer, server is $server"); - &reconlonc("$perlvar{'lonSockDir'}/$server"); - } - $answer=subreply($cmd,$server); - } - } else { - $answer='self_reply'; - } - return $answer; + my ($cmd,$server)=@_; + my $answer; + if ($server ne $currenthostid) { + $answer=subreply($cmd,$server); + if ($answer eq 'con_lost') { + $answer=subreply("ping",$server); + if ($answer ne $server) { + &logthis("sub reply: answer != server answer is $answer, server is $server"); + &reconlonc("$perlvar{'lonSockDir'}/$server"); + } + $answer=subreply($cmd,$server); + } + } else { + $answer='self_reply'; + } + return $answer; } # -------------------------------------------------------------- Talk to lonsql @@ -3785,7 +3600,7 @@ sub subsqlreply { my $sclient=IO::Socket::UNIX->new(Peer =>"$peerfile", Type => SOCK_STREAM, Timeout => 10) - or return "con_lost"; + or return "con_lost"; print $sclient "$cmd\n"; my $answer=<$sclient>; chomp($answer); @@ -3797,14 +3612,11 @@ sub subsqlreply { sub propath { my ($udom,$uname)=@_; - Debug("Propath:$udom:$uname"); $udom=~s/\W//g; $uname=~s/\W//g; - Debug("Propath2:$udom:$uname"); my $subdir=$uname.'__'; $subdir =~ s/(.)(.)(.).*/$1\/$2\/$3/; my $proname="$perlvar{'lonUsersDir'}/$udom/$subdir/$uname"; - Debug("Propath returning $proname"); return $proname; } @@ -3837,7 +3649,7 @@ my $execdir=$perlvar{'lonDaemons'}; open (PIDSAVE,">$execdir/logs/lond.pid"); print PIDSAVE "$$\n"; close(PIDSAVE); -&logthis("CRITICAL: ---------- Starting ----------"); +&logthis("CRITICAL: ---------- Starting ----------"); &status('Starting'); @@ -3855,7 +3667,6 @@ $SIG{USR2} = \&UpdateHosts; ReadHostTable; - # -------------------------------------------------------------- # Accept connections. When a connection comes in, it is validated # and if good, a child process is created to process transactions @@ -3871,6 +3682,7 @@ while (1) { sub make_new_child { my $pid; +# my $cipher; # Now global my $sigset; $client = shift; @@ -3881,7 +3693,7 @@ sub make_new_child { $sigset = POSIX::SigSet->new(SIGINT); sigprocmask(SIG_BLOCK, $sigset) or die "Can't block SIGINT for fork: $!\n"; - + die "fork: $!" unless defined ($pid = fork); $client->sockopt(SO_KEEPALIVE, 1); # Enable monitoring of @@ -3892,15 +3704,27 @@ sub make_new_child { # the pid hash. # my $caller = getpeername($client); - my ($port,$iaddr)=unpack_sockaddr_in($caller); - $clientip=inet_ntoa($iaddr); + my ($port,$iaddr); + if (defined($caller) && length($caller) > 0) { + ($port,$iaddr)=unpack_sockaddr_in($caller); + } else { + &logthis("Unable to determine who caller was, getpeername returned nothing"); + } + if (defined($iaddr)) { + $clientip = inet_ntoa($iaddr); + Debug("Connected with $clientip"); + $clientdns = gethostbyaddr($iaddr, AF_INET); + Debug("Connected with $clientdns by name"); + } else { + &logthis("Unable to determine clientip"); + $clientip='Unavailable'; + } if ($pid) { # Parent records the child's birth and returns. sigprocmask(SIG_UNBLOCK, $sigset) or die "Can't unblock SIGINT for fork: $!\n"; $children{$pid} = $clientip; - $children++; &status('Started child '.$pid); return; } else { @@ -3917,16 +3741,16 @@ sub make_new_child { sigprocmask(SIG_UNBLOCK, $sigset) or die "Can't unblock SIGINT for fork: $!\n"; - - +# my $tmpsnum=0; # Now global +#---------------------------------------------------- kerberos 5 initialization &Authen::Krb5::init_context(); &Authen::Krb5::init_ets(); - + &status('Accepted connection'); # ============================================================================= # do something with the connection # ----------------------------------------------------------------------------- - # see if we know client and check for spoof IP by challenge + # see if we know client and 'check' for spoof IP by ineffective challenge ReadManagerTable; # May also be a manager!! @@ -3944,37 +3768,102 @@ sub make_new_child { $clientname = $managers{$clientip}; } my $clientok; + if ($clientrec || $ismanager) { &status("Waiting for init from $clientip $clientname"); &logthis('INFO: Connection, '. $clientip. - " ($clientname) connection type = $ConnectionType " ); + " ($clientname) connection type = $ConnectionType " ); &status("Connecting $clientip ($clientname))"); my $remotereq=<$client>; - $remotereq=~s/[^\w:]//g; + chomp($remotereq); + Debug("Got init: $remotereq"); + my $inikeyword = split(/:/, $remotereq); if ($remotereq =~ /^init/) { &sethost("sethost:$perlvar{'lonHostID'}"); - my $challenge="$$".time; - print $client "$challenge\n"; - &status("Waiting for challenge reply from $clientip ($clientname)"); - $remotereq=<$client>; - $remotereq=~s/\W//g; - if ($challenge eq $remotereq) { - $clientok=1; - print $client "ok\n"; + # + # If the remote is attempting a local init... give that a try: + # + my ($i, $inittype) = split(/:/, $remotereq); + + # If the connection type is ssl, but I didn't get my + # certificate files yet, then I'll drop back to + # insecure (if allowed). + + if($inittype eq "ssl") { + my ($ca, $cert) = lonssl::CertificateFile; + my $kfile = lonssl::KeyFile; + if((!$ca) || + (!$cert) || + (!$kfile)) { + $inittype = ""; # This forces insecure attempt. + &logthis(" Certificates not " + ."installed -- trying insecure auth"); + } else { # SSL certificates are in place so + } # Leave the inittype alone. + } + + if($inittype eq "local") { + my $key = LocalConnection($client, $remotereq); + if($key) { + Debug("Got local key $key"); + $clientok = 1; + my $cipherkey = pack("H32", $key); + $cipher = new IDEA($cipherkey); + print $client "ok:local\n"; + &logthis('"); + $keymode = "local" + } else { + Debug("Failed to get local key"); + $clientok = 0; + shutdown($client, 3); + close $client; + } + } elsif ($inittype eq "ssl") { + my $key = SSLConnection($client); + if ($key) { + $clientok = 1; + my $cipherkey = pack("H32", $key); + $cipher = new IDEA($cipherkey); + &logthis('' + ."Successfull ssl authentication with $clientname "); + $keymode = "ssl"; + + } else { + $clientok = 0; + close $client; + } + } else { - &logthis("WARNING: $clientip did not reply challenge"); - &status('No challenge reply '.$clientip); + my $ok = InsecureConnection($client); + if($ok) { + $clientok = 1; + &logthis('' + ."Successful insecure authentication with $clientname "); + print $client "ok\n"; + $keymode = "insecure"; + } else { + &logthis('' + ."Attempted insecure connection disallowed "); + close $client; + $clientok = 0; + + } } } else { - &logthis("WARNING: " + &logthis( + "WARNING: " ."$clientip failed to initialize: >$remotereq< "); &status('No init '.$clientip); } + } else { - &logthis("WARNING: Unknown client $clientip"); + &logthis( + "WARNING: Unknown client $clientip"); &status('Hung up on '.$clientip); } + if ($clientok) { # ---------------- New known client connecting, could mean machine online again @@ -3986,31 +3875,31 @@ sub make_new_child { } &reconlonc("$perlvar{'lonSockDir'}/$id"); } - &logthis("Established connection: $clientname"); + &logthis("Established connection: $clientname"); &status('Will listen to '.$clientname); - - ResetStatistics(); - # ------------------------------------------------------------ Process requests - my $KeepGoing = 1; - while ((my $userinput=GetRequest) && $KeepGoing) { - $KeepGoing = ProcessRequest($userinput); -# -------------------------------------------------------------------- complete - - &status('Listening to '.$clientname); + my $keep_going = 1; + my $user_input; + while(($user_input = get_request) && $keep_going) { + alarm(120); + Debug("Main: Got $user_input\n"); + $keep_going = &process_request($user_input); + alarm(0); + &status('Listening to '.$clientname." ($keymode)"); } + # --------------------------------------------- client unknown or fishy, refuse - } else { + } else { print $client "refused\n"; $client->close(); - &logthis("WARNING: " + &logthis("WARNING: " ."Rejected client $clientip, closing connection"); } - } + } # ============================================================================= - &logthis("CRITICAL: " + &logthis("CRITICAL: " ."Disconnect from $clientip ($clientname)"); @@ -4033,14 +3922,12 @@ sub make_new_child { # user - Name of the user for which the role is being put. # authtype - The authentication type associated with the user. # -sub ManagePermissions { - my $request = shift; - my $domain = shift; - my $user = shift; - my $authtype= shift; +sub ManagePermissions +{ + + my ($request, $domain, $user, $authtype) = @_; # See if the request is of the form /$domain/_au - &logthis("ruequest is $request"); if($request =~ /^(\/$domain\/_au)$/) { # It's an author rolesput... my $execdir = $perlvar{'lonDaemons'}; my $userhome= "/home/$user" ; @@ -4049,6 +3936,7 @@ sub ManagePermissions { } } + # # Return the full path of a user password file, whether it exists or not. # Parameters: @@ -4057,9 +3945,9 @@ sub ManagePermissions { # Returns: # Full passwd path: # -sub PasswordPath { - my $domain = shift; - my $user = shift; +sub password_path { + my ($domain, $user) = @_; + my $path = &propath($domain, $user); $path .= "/passwd"; @@ -4077,13 +3965,12 @@ sub PasswordPath { # - If the password file exists returns its path. # - If the password file does not exist, returns undefined. # -sub PasswordFilename { - my $domain = shift; - my $user = shift; +sub password_filename { + my ($domain, $user) = @_; Debug ("PasswordFilename called: dom = $domain user = $user"); - my $path = PasswordPath($domain, $user); + my $path = &password_path($domain, $user); Debug("PasswordFilename got path: $path"); if(-e $path) { return $path; @@ -4102,12 +3989,10 @@ sub PasswordFilename { # 0 - Failed. # 1 - Success. # -sub RewritePwFile { - my $domain = shift; - my $user = shift; - my $contents = shift; +sub rewrite_password_file { + my ($domain, $user, $contents) = @_; - my $file = PasswordFilename($domain, $user); + my $file = &password_filename($domain, $user); if (defined $file) { my $pf = IO::File->new(">$file"); if($pf) { @@ -4121,23 +4006,33 @@ sub RewritePwFile { } } + # -# GetAuthType - Determines the authorization type of a user in a domain. +# get_auth_type - Determines the authorization type of a user in a domain. # Returns the authorization type or nouser if there is no such user. # -sub GetAuthType { - my $domain = shift; - my $user = shift; - - Debug("GetAuthType( $domain, $user ) \n"); - my $passwdfile = PasswordFilename($domain, $user); - if( defined $passwdfile ) { +sub get_auth_type +{ + + my ($domain, $user) = @_; + + Debug("get_auth_type( $domain, $user ) \n"); + my $proname = &propath($domain, $user); + my $passwdfile = "$proname/passwd"; + if( -e $passwdfile ) { my $pf = IO::File->new($passwdfile); my $realpassword = <$pf>; chomp($realpassword); Debug("Password info = $realpassword\n"); - return $realpassword; + my ($authtype, $contentpwd) = split(/:/, $realpassword); + Debug("Authtype = $authtype, content = $contentpwd\n"); + my $availinfo = ''; + if($authtype eq 'krb4' or $authtype eq 'krb5') { + $availinfo = $contentpwd; + } + + return "$authtype:$availinfo"; } else { Debug("Returning nouser"); return "nouser"; @@ -4159,10 +4054,9 @@ sub GetAuthType { # user. # 0 - The domain,user,password triplet is not a valid user. # -sub ValidateUser { - my $domain = shift; - my $user = shift; - my $password= shift; +sub validate_user { + my ($domain, $user, $password) = @_; + # Why negative ~pi you may well ask? Well this function is about # authentication, and therefore very important to get right. @@ -4179,7 +4073,7 @@ sub ValidateUser { # the user has been assigned. If the authentication type is # "nouser", the user does not exist so we will return 0. - my $contents = GetAuthType($domain, $user); + my $contents = &get_auth_type($domain, $user); my ($howpwd, $contentpwd) = split(/:/, $contents); my $null = pack("C",0); # Used by kerberos auth types. @@ -4219,18 +4113,15 @@ sub ValidateUser { $password); if(!$k4error) { $validated = 1; - } - else { + } else { $validated = 0; &logthis('krb4: '.$user.', '.$contentpwd.', '. &Authen::Krb4::get_err_txt($Authen::Krb4::error)); } - } - else { + } else { $validated = 0; # Password has a match with null. } - } - elsif ($howpwd eq "krb5") { # User is in kerberos 5 auth. domain. + } elsif ($howpwd eq "krb5") { # User is in kerberos 5 auth. domain. if(!($password =~ /$null/)) { # Null password not allowed. my $krbclient = &Authen::Krb5::parse_name($user.'@' .$contentpwd); @@ -4243,18 +4134,15 @@ sub ValidateUser { $password, $credentials); $validated = ($krbreturn == 1); - } - else { + } else { $validated = 0; } - } - elsif ($howpwd eq "localauth") { + } elsif ($howpwd eq "localauth") { # Authenticate via installation specific authentcation method: $validated = &localauth::localauth($user, $password, $contentpwd); - } - else { # Unrecognized auth is also bad. + } else { # Unrecognized auth is also bad. $validated = 0; } } else { @@ -4270,9 +4158,7 @@ sub ValidateUser { return $validated; } -# -# Add a line to the subscription list? -# + sub addline { my ($fname,$hostid,$ip,$newline)=@_; my $contents; @@ -4292,9 +4178,7 @@ sub addline { $sh->close(); return $found; } -# -# Get chat messages. -# + sub getchat { my ($cdom,$cname,$udom,$uname)=@_; my %hash; @@ -4319,9 +4203,7 @@ sub getchat { } return (@participants,@entries); } -# -# Add a chat message -# + sub chatadd { my ($cdom,$cname,$newchat)=@_; my %hash; @@ -4361,17 +4243,36 @@ sub chatadd { sub unsub { my ($fname,$clientip)=@_; my $result; + my $unsubs = 0; # Number of successful unsubscribes: + + + # An old way subscriptions were handled was to have a + # subscription marker file: + + Debug("Attempting unlink of $fname.$clientname"); if (unlink("$fname.$clientname")) { - $result="ok\n"; - } else { - $result="not_subscribed\n"; - } + $unsubs++; # Successful unsub via marker file. + } + + # The more modern way to do it is to have a subscription list + # file: + if (-e "$fname.subscription") { my $found=&addline($fname,$clientname,$clientip,''); - if ($found) { $result="ok\n"; } + if ($found) { + $unsubs++; + } + } + + # If either or both of these mechanisms succeeded in unsubscribing a + # resource we can return ok: + + if($unsubs) { + $result = "ok\n"; } else { - if ($result != "ok\n") { $result="not_subscribed\n"; } + $result = "not_subscribed\n"; } + return $result; } @@ -4380,7 +4281,7 @@ sub currentversion { my $version=-1; my $ulsdir=''; if ($fname=~/^(.+)\/[^\/]+$/) { - $ulsdir=$1; + $ulsdir=$1; } my ($fnamere1,$fnamere2); # remove version if already specified @@ -4437,8 +4338,8 @@ sub subscribe { symlink($root.'.'.$extension, $root.'.'.$currentversion.'.'.$extension); unless ($extension=~/\.meta$/) { - symlink($root.'.'.$extension.'.meta', - $root.'.'.$currentversion.'.'.$extension.'.meta'); + symlink($root.'.'.$extension.'.meta', + $root.'.'.$currentversion.'.'.$extension.'.meta'); } } } @@ -4492,38 +4393,48 @@ sub make_passwd_file { print $pf "localauth:$npass\n"; } } elsif ($umode eq 'unix') { - # - # Don't allow the creation of privileged accounts!!! that would - # be real bad!!! - # - my $uid = getpwnam($uname); - if((defined $uid) && ($uid == 0)) { - &logthis(">>>Attempted add of privileged account blocked<<<"); - return "no_priv_account_error\n"; - } + { + # + # Don't allow the creation of privileged accounts!!! that would + # be real bad!!! + # + my $uid = getpwnam($uname); + if((defined $uid) && ($uid == 0)) { + &logthis(">>>Attempted to create privilged account blocked"); + return "no_priv_account_error\n"; + } - # - my $execpath="$perlvar{'lonDaemons'}/"."lcuseradd"; - - &Debug("Executing external: ".$execpath); - &Debug("user = ".$uname.", Password =". $npass); - my $se = IO::File->new("|$execpath > $perlvar{'lonDaemons'}/logs/lcuseradd.log"); - print $se "$uname\n"; - print $se "$npass\n"; - print $se "$npass\n"; - - my $useraddok = $?; - if($useraddok > 0) { - my $lcstring = lcuseraddstrerror($useraddok); - &logthis("Failed lcuseradd: $lcstring"); - return "error: lcuseradd failed: $lcstring\n"; + my $execpath ="$perlvar{'lonDaemons'}/"."lcuseradd"; + + my $lc_error_file = $execdir."/tmp/lcuseradd".$$.".status"; + { + &Debug("Executing external: ".$execpath); + &Debug("user = ".$uname.", Password =". $npass); + my $se = IO::File->new("|$execpath > $perlvar{'lonDaemons'}/logs/lcuseradd.log"); + print $se "$uname\n"; + print $se "$npass\n"; + print $se "$npass\n"; + print $se "$lc_error_file\n"; # Status -> unique file. + } + my $error = IO::File->new("< $lc_error_file"); + my $useraddok = <$error>; + $error->close; + unlink($lc_error_file); + + chomp $useraddok; + + if($useraddok > 0) { + my $error_text = &lcuseraddstrerror($useraddok); + &logthis("Failed lcuseradd: $error_text"); + $result = "lcuseradd_failed:$error_text\n"; + } else { + my $pf = IO::File->new(">$passfilename"); + print $pf "unix:\n"; + } } - my $pf = IO::File->new(">$passfilename"); - print $pf "unix:\n"; - } elsif ($umode eq 'none') { { - my $pf = IO::File->new(">$passfilename"); + my $pf = IO::File->new("> $passfilename"); print $pf "none:\n"; } } else { @@ -4537,7 +4448,7 @@ sub sethost { my (undef,$hostid)=split(/:/,$remotereq); if (!defined($hostid)) { $hostid=$perlvar{'lonHostID'}; } if ($hostip{$perlvar{'lonHostID'}} eq $hostip{$hostid}) { - $currenthostid=$hostid; + $currenthostid =$hostid; $currentdomainid=$hostdom{$hostid}; &logthis("Setting hostid to $hostid, and domain to $currentdomainid"); } else { @@ -4553,10 +4464,8 @@ sub version { $remoteVERSION=(split(/:/,$userinput))[1]; return "version:$VERSION"; } -############## >>>>>>>>>>>>>>>>>>>>>>>>>> FUTUREWORK <<<<<<<<<<<<<<<<<<<<<<<<<<<< + #There is a copy of this in lonnet.pm -# Can we hoist these lil' things out into common places? -# sub userload { my $numusers=0; { @@ -4579,6 +4488,74 @@ sub userload { return $userloadpercent; } +# Routines for serializing arrays and hashes (copies from lonnet) + +sub array2str { + my (@array) = @_; + my $result=&arrayref2str(\@array); + $result=~s/^__ARRAY_REF__//; + $result=~s/__END_ARRAY_REF__$//; + return $result; +} + +sub arrayref2str { + my ($arrayref) = @_; + my $result='__ARRAY_REF__'; + foreach my $elem (@$arrayref) { + if(ref($elem) eq 'ARRAY') { + $result.=&arrayref2str($elem).'&'; + } elsif(ref($elem) eq 'HASH') { + $result.=&hashref2str($elem).'&'; + } elsif(ref($elem)) { + #print("Got a ref of ".(ref($elem))." skipping."); + } else { + $result.=&escape($elem).'&'; + } + } + $result=~s/\&$//; + $result .= '__END_ARRAY_REF__'; + return $result; +} + +sub hash2str { + my (%hash) = @_; + my $result=&hashref2str(\%hash); + $result=~s/^__HASH_REF__//; + $result=~s/__END_HASH_REF__$//; + return $result; +} + +sub hashref2str { + my ($hashref)=@_; + my $result='__HASH_REF__'; + foreach (sort(keys(%$hashref))) { + if (ref($_) eq 'ARRAY') { + $result.=&arrayref2str($_).'='; + } elsif (ref($_) eq 'HASH') { + $result.=&hashref2str($_).'='; + } elsif (ref($_)) { + $result.='='; + #print("Got a ref of ".(ref($_))." skipping."); + } else { + if ($_) {$result.=&escape($_).'=';} else { last; } + } + + if(ref($hashref->{$_}) eq 'ARRAY') { + $result.=&arrayref2str($hashref->{$_}).'&'; + } elsif(ref($hashref->{$_}) eq 'HASH') { + $result.=&hashref2str($hashref->{$_}).'&'; + } elsif(ref($hashref->{$_})) { + $result.='&'; + #print("Got a ref of ".(ref($hashref->{$_}))." skipping."); + } else { + $result.=&escape($hashref->{$_}).'&'; + } + } + $result=~s/\&$//; + $result .= '__END_HASH_REF__'; + return $result; +} + # ----------------------------------- POD (plain old documentation, CPAN style) =head1 NAME