--- loncom/lond 2004/03/08 20:59:41 1.180 +++ loncom/lond 2006/02/09 23:41:22 1.318.2.4 @@ -2,7 +2,7 @@ # The LearningOnline Network # lond "LON Daemon" Server (port "LOND" 5663) # -# $Id: lond,v 1.180 2004/03/08 20:59:41 albertel Exp $ +# $Id: lond,v 1.318.2.4 2006/02/09 23:41:22 albertel Exp $ # # Copyright Michigan State University Board of Trustees # @@ -45,25 +45,38 @@ use Authen::Krb4; use Authen::Krb5; use lib '/home/httpd/lib/perl/'; use localauth; +use localenroll; +use localstudentphoto; use File::Copy; +use File::Find; use LONCAPA::ConfigFileEdit; +use LONCAPA::lonlocal; +use LONCAPA::lonssl; +use Fcntl qw(:flock); +use Symbol; my $DEBUG = 0; # Non zero to enable debug log entries. my $status=''; my $lastlog=''; +my $lond_max_wait_time = 13; -my $VERSION='$Revision: 1.180 $'; #' stupid emacs +my $VERSION='$Revision: 1.318.2.4 $'; #' stupid emacs my $remoteVERSION; -my $currenthostid; +my $currenthostid="default"; my $currentdomainid; my $client; -my $clientip; -my $clientname; +my $clientip; # IP address of client. +my $clientname; # LonCAPA name of client. my $server; -my $thisserver; +my $thisserver; # DNS of us. + +my $keymode; + +my $cipher; # Cipher key negotiated with client +my $tmpsnum = 0; # Id of tmpputs. # # Connection type is: @@ -74,31 +87,49 @@ my $thisserver; my $ConnectionType; -my %hostid; -my %hostdom; -my %hostip; +my %hostid; # ID's for hosts in cluster by ip. +my %hostdom; # LonCAPA domain for hosts in cluster. +my %hostname; # DNSname -> ID's mapping. +my %hostip; # IPs for hosts in cluster. +my %hostdns; # ID's of hosts looked up by DNS name. my %managers; # Ip -> manager names my %perlvar; # Will have the apache conf defined perl vars. # +# The hash below is used for command dispatching, and is therefore keyed on the request keyword. +# Each element of the hash contains a reference to an array that contains: +# A reference to a sub that executes the request corresponding to the keyword. +# A flag that is true if the request must be encoded to be acceptable. +# A mask with bits as follows: +# CLIENT_OK - Set when the function is allowed by ordinary clients +# MANAGER_OK - Set when the function is allowed to manager clients. +# +my $CLIENT_OK = 1; +my $MANAGER_OK = 2; +my %Dispatcher; + + +# # The array below are password error strings." # my $lastpwderror = 13; # Largest error number from lcpasswd. my @passwderrors = ("ok", - "lcpasswd must be run as user 'www'", - "lcpasswd got incorrect number of arguments", - "lcpasswd did not get the right nubmer of input text lines", - "lcpasswd too many simultaneous pwd changes in progress", - "lcpasswd User does not exist.", - "lcpasswd Incorrect current passwd", - "lcpasswd Unable to su to root.", - "lcpasswd Cannot set new passwd.", - "lcpasswd Username has invalid characters", - "lcpasswd Invalid characters in password", - "11", "12", - "lcpasswd Password mismatch"); + "pwchange_failure - lcpasswd must be run as user 'www'", + "pwchange_failure - lcpasswd got incorrect number of arguments", + "pwchange_failure - lcpasswd did not get the right nubmer of input text lines", + "pwchange_failure - lcpasswd too many simultaneous pwd changes in progress", + "pwchange_failure - lcpasswd User does not exist.", + "pwchange_failure - lcpasswd Incorrect current passwd", + "pwchange_failure - lcpasswd Unable to su to root.", + "pwchange_failure - lcpasswd Cannot set new passwd.", + "pwchange_failure - lcpasswd Username has invalid characters", + "pwchange_failure - lcpasswd Invalid characters in password", + "pwchange_failure - lcpasswd User already exists", + "pwchange_failure - lcpasswd Something went wrong with user addition.", + "pwchange_failure - lcpasswd Password mismatch", + "pwchange_failure - lcpasswd Error filename is invalid"); # The array below are lcuseradd error strings.: @@ -120,7 +151,226 @@ my @adderrors = ("ok", "lcuseradd Password mismatch"); + +# +# Statistics that are maintained and dislayed in the status line. +# +my $Transactions = 0; # Number of attempted transactions. +my $Failures = 0; # Number of transcations failed. + +# ResetStatistics: +# Resets the statistics counters: +# +sub ResetStatistics { + $Transactions = 0; + $Failures = 0; +} + +#------------------------------------------------------------------------ +# +# LocalConnection +# Completes the formation of a locally authenticated connection. +# This function will ensure that the 'remote' client is really the +# local host. If not, the connection is closed, and the function fails. +# If so, initcmd is parsed for the name of a file containing the +# IDEA session key. The fie is opened, read, deleted and the session +# key returned to the caller. +# +# Parameters: +# $Socket - Socket open on client. +# $initcmd - The full text of the init command. +# +# Implicit inputs: +# $thisserver - Our DNS name. +# +# Returns: +# IDEA session key on success. +# undef on failure. +# +sub LocalConnection { + my ($Socket, $initcmd) = @_; + Debug("Attempting local connection: $initcmd client: $clientip me: $thisserver"); + if($clientip ne "127.0.0.1") { + &logthis(' LocalConnection rejecting non local: ' + ."$clientip ne $thisserver "); + close $Socket; + return undef; + } else { + chomp($initcmd); # Get rid of \n in filename. + my ($init, $type, $name) = split(/:/, $initcmd); + Debug(" Init command: $init $type $name "); + + # Require that $init = init, and $type = local: Otherwise + # the caller is insane: + + if(($init ne "init") && ($type ne "local")) { + &logthis(' LocalConnection: caller is insane! ' + ."init = $init, and type = $type "); + close($Socket);; + return undef; + + } + # Now get the key filename: + + my $IDEAKey = lonlocal::ReadKeyFile($name); + return $IDEAKey; + } +} +#------------------------------------------------------------------------------ +# +# SSLConnection +# Completes the formation of an ssh authenticated connection. The +# socket is promoted to an ssl socket. If this promotion and the associated +# certificate exchange are successful, the IDEA key is generated and sent +# to the remote peer via the SSL tunnel. The IDEA key is also returned to +# the caller after the SSL tunnel is torn down. +# +# Parameters: +# Name Type Purpose +# $Socket IO::Socket::INET Plaintext socket. +# +# Returns: +# IDEA key on success. +# undef on failure. +# +sub SSLConnection { + my $Socket = shift; + + Debug("SSLConnection: "); + my $KeyFile = lonssl::KeyFile(); + if(!$KeyFile) { + my $err = lonssl::LastError(); + &logthis(" CRITICAL" + ."Can't get key file $err "); + return undef; + } + my ($CACertificate, + $Certificate) = lonssl::CertificateFile(); + + + # If any of the key, certificate or certificate authority + # certificate filenames are not defined, this can't work. + + if((!$Certificate) || (!$CACertificate)) { + my $err = lonssl::LastError(); + &logthis(" CRITICAL" + ."Can't get certificates: $err "); + + return undef; + } + Debug("Key: $KeyFile CA: $CACertificate Cert: $Certificate"); + + # Indicate to our peer that we can procede with + # a transition to ssl authentication: + + print $Socket "ok:ssl\n"; + + Debug("Approving promotion -> ssl"); + # And do so: + + my $SSLSocket = lonssl::PromoteServerSocket($Socket, + $CACertificate, + $Certificate, + $KeyFile); + if(! ($SSLSocket) ) { # SSL socket promotion failed. + my $err = lonssl::LastError(); + &logthis(" CRITICAL " + ."SSL Socket promotion failed: $err "); + return undef; + } + Debug("SSL Promotion successful"); + + # + # The only thing we'll use the socket for is to send the IDEA key + # to the peer: + + my $Key = lonlocal::CreateCipherKey(); + print $SSLSocket "$Key\n"; + + lonssl::Close($SSLSocket); + + Debug("Key exchange complete: $Key"); + + return $Key; +} +# +# InsecureConnection: +# If insecure connections are allowd, +# exchange a challenge with the client to 'validate' the +# client (not really, but that's the protocol): +# We produce a challenge string that's sent to the client. +# The client must then echo the challenge verbatim to us. +# +# Parameter: +# Socket - Socket open on the client. +# Returns: +# 1 - success. +# 0 - failure (e.g.mismatch or insecure not allowed). +# +sub InsecureConnection { + my $Socket = shift; + + # Don't even start if insecure connections are not allowed. + + if(! $perlvar{londAllowInsecure}) { # Insecure connections not allowed. + return 0; + } + + # Fabricate a challenge string and send it.. + + my $challenge = "$$".time; # pid + time. + print $Socket "$challenge\n"; + &status("Waiting for challenge reply"); + + my $answer = <$Socket>; + $answer =~s/\W//g; + if($challenge eq $answer) { + return 1; + } else { + logthis("WARNING client did not respond to challenge"); + &status("No challenge reqply"); + return 0; + } + + +} +# +# Safely execute a command (as long as it's not a shel command and doesn +# not require/rely on shell escapes. The function operates by doing a +# a pipe based fork and capturing stdout and stderr from the pipe. +# +# Formal Parameters: +# $line - A line of text to be executed as a command. +# Returns: +# The output from that command. If the output is multiline the caller +# must know how to split up the output. +# # +sub execute_command { + my ($line) = @_; + my @words = split(/\s/, $line); # Bust the command up into words. + my $output = ""; + + my $pid = open(CHILD, "-|"); + + if($pid) { # Parent process + Debug("In parent process for execute_command"); + my @data = ; # Read the child's outupt... + close CHILD; + foreach my $output_line (@data) { + Debug("Adding $output_line"); + $output .= $output_line; # Presumably has a \n on it. + } + + } else { # Child process + close (STDERR); + open (STDERR, ">&STDOUT");# Combine stderr, and stdout... + exec(@words); # won't return. + } + return $output; +} + + # GetCertificate: Given a transaction that requires a certificate, # this function will extract the certificate from the transaction # request. Note that at this point, the only concept of a certificate @@ -158,7 +408,6 @@ sub isClient { # - This allows dynamic changes to the manager table # without the need to signal to the lond. # - sub ReadManagerTable { # Clean out the old table first.. @@ -175,7 +424,6 @@ sub ReadManagerTable { while(my $host = ) { chomp($host); if ($host =~ "^#") { # Comment line. - logthis(' Skipping line: '. "$host\n"); next; } if (!defined $hostip{$host}) { # This is a non cluster member @@ -225,42 +473,14 @@ sub ValidManager { # 1 - Success. # sub CopyFile { - my $oldfile = shift; - my $newfile = shift; - - # The file must exist: - if(-e $oldfile) { + my ($oldfile, $newfile) = @_; - # Read the old file. - - my $oldfh = IO::File->new("< $oldfile"); - if(!$oldfh) { - return 0; - } - my @contents = <$oldfh>; # Suck in the entire file. - - # write the backup file: - - my $newfh = IO::File->new("> $newfile"); - if(!(defined $newfh)){ - return 0; - } - my $lines = scalar @contents; - for (my $i =0; $i < $lines; $i++) { - print $newfh ($contents[$i]); - } - - $oldfh->close; - $newfh->close; - - chmod(0660, $newfile); - - return 1; - - } else { - return 0; + if (! copy($oldfile,$newfile)) { + return 0; } + chmod(0660, $newfile); + return 1; } # # Host files are passed out with externally visible host IPs. @@ -326,8 +546,8 @@ sub AdjustHostContents { # 0 - failure and $! has an errno. # sub InstallFile { - my $Filename = shift; - my $Contents = shift; + + my ($Filename, $Contents) = @_; my $TempFile = $Filename.".tmp"; # Open the file for write: @@ -350,6 +570,8 @@ sub InstallFile { return 1; } + + # # ConfigFileFromSelector: converts a configuration file selector # (one of host or domain at this point) into a @@ -439,8 +661,7 @@ sub PushFile { &logthis(' Pushfile: unable to install ' .$tablefile." $! "); return "error:$!"; - } - else { + } else { &logthis(' Installed new '.$tablefile .""); @@ -564,8 +785,8 @@ sub isValidEditCommand { # file being edited. # sub ApplyEdit { - my $directive = shift; - my $editor = shift; + + my ($directive, $editor) = @_; # Break the directive down into its command and its parameters # (at most two at this point. The meaning of the parameters, if in fact @@ -649,8 +870,8 @@ sub AdjustOurHost { # editor - Editor containing the file. # sub ReplaceConfigFile { - my $filename = shift; - my $editor = shift; + + my ($filename, $editor) = @_; CopyFile ($filename, $filename.".old"); @@ -719,6 +940,3736 @@ sub EditFile { return "ok\n"; } + +#--------------------------------------------------------------- +# +# Manipulation of hash based databases (factoring out common code +# for later use as we refactor. +# +# Ties a domain level resource file to a hash. +# If requested a history entry is created in the associated hist file. +# +# Parameters: +# domain - Name of the domain in which the resource file lives. +# namespace - Name of the hash within that domain. +# how - How to tie the hash (e.g. GDBM_WRCREAT()). +# loghead - Optional parameter, if present a log entry is created +# in the associated history file and this is the first part +# of that entry. +# logtail - Goes along with loghead, The actual logentry is of the +# form $loghead::logtail. +# Returns: +# Reference to a hash bound to the db file or alternatively undef +# if the tie failed. +# +sub tie_domain_hash { + my ($domain,$namespace,$how,$loghead,$logtail) = @_; + + # Filter out any whitespace in the domain name: + + $domain =~ s/\W//g; + + # We have enough to go on to tie the hash: + + my $user_top_dir = $perlvar{'lonUsersDir'}; + my $domain_dir = $user_top_dir."/$domain"; + my $resource_file = $domain_dir."/$namespace"; + return &_locking_hash_tie($resource_file,$namespace,$how,$loghead,$logtail); +} + +sub untie_domain_hash { + return &_locking_hash_untie(@_); +} +# +# Ties a user's resource file to a hash. +# If necessary, an appropriate history +# log file entry is made as well. +# This sub factors out common code from the subs that manipulate +# the various gdbm files that keep keyword value pairs. +# Parameters: +# domain - Name of the domain the user is in. +# user - Name of the 'current user'. +# namespace - Namespace representing the file to tie. +# how - What the tie is done to (e.g. GDBM_WRCREAT(). +# loghead - Optional first part of log entry if there may be a +# history file. +# what - Optional tail of log entry if there may be a history +# file. +# Returns: +# hash to which the database is tied. It's up to the caller to untie. +# undef if the has could not be tied. +# +sub tie_user_hash { + my ($domain,$user,$namespace,$how,$loghead,$what) = @_; + + $namespace=~s/\//\_/g; # / -> _ + $namespace=~s/\W//g; # whitespace eliminated. + my $proname = propath($domain, $user); + + my $file_prefix="$proname/$namespace"; + return &_locking_hash_tie($file_prefix,$namespace,$how,$loghead,$what); +} + +sub untie_user_hash { + return &_locking_hash_untie(@_); +} + +# internal routines that handle the actual tieing and untieing process + +sub _do_hash_tie { + my ($file_prefix,$namespace,$how,$loghead,$what) = @_; + my %hash; + if(tie(%hash, 'GDBM_File', "$file_prefix.db", $how, 0640)) { + # If this is a namespace for which a history is kept, + # make the history log entry: + if (($namespace !~/^nohist\_/) && (defined($loghead))) { + my $args = scalar @_; + Debug(" Opening history: $file_prefix $args"); + my $hfh = IO::File->new(">>$file_prefix.hist"); + if($hfh) { + my $now = time; + print $hfh "$loghead:$now:$what\n"; + } + $hfh->close; + } + return \%hash; + } else { + return undef; + } +} + +sub _do_hash_untie { + my ($hashref) = @_; + my $result = untie(%$hashref); + return $result; +} + +{ + my $sym; + + sub _locking_hash_tie { + my ($file_prefix,$namespace,$how,$loghead,$what) = @_; + + my ($lock); + + if ($how eq &GDBM_READER()) { + $lock=LOCK_SH; + $how=$how|&GDBM_NOLOCK(); + #if the db doesn't exist we can't read from it + if (! -e "$file_prefix.db") { + $! = 2; + return undef; + } + } elsif ($how eq &GDBM_WRCREAT()) { + $lock=LOCK_EX; + $how=$how|&GDBM_NOLOCK(); + if (! -e "$file_prefix.db") { + # doesn't exist but we need it to in order to successfully + # lock it so bring it into existance + open(TOUCH,">>$file_prefix.db"); + close(TOUCH); + } + } else { + &logthis("Unknown method $how for $file_prefix"); + die(); + } + + $sym=&Symbol::gensym(); + open($sym,"$file_prefix.db"); + my $failed=0; + eval { + local $SIG{__DIE__}='DEFAULT'; + local $SIG{ALRM}=sub { + $failed=1; + die("failed lock"); + }; + alarm($lond_max_wait_time); + flock($sym,$lock); + alarm(0); + }; + if ($failed) { + $! = 100; # throwing error # 100 + return undef; + } + return &_do_hash_tie($file_prefix,$namespace,$how,$loghead,$what); + } + + sub _locking_hash_untie { + my ($hashref) = @_; + my $result = untie(%$hashref); + flock($sym,LOCK_UN); + close($sym); + undef($sym); + return $result; + } +} + +# read_profile +# +# Returns a set of specific entries from a user's profile file. +# this is a utility function that is used by both get_profile_entry and +# get_profile_entry_encrypted. +# +# Parameters: +# udom - Domain in which the user exists. +# uname - User's account name (loncapa account) +# namespace - The profile namespace to open. +# what - A set of & separated queries. +# Returns: +# If all ok: - The string that needs to be shipped back to the user. +# If failure - A string that starts with error: followed by the failure +# reason.. note that this probabyl gets shipped back to the +# user as well. +# +sub read_profile { + my ($udom, $uname, $namespace, $what) = @_; + + my $hashref = &tie_user_hash($udom, $uname, $namespace, + &GDBM_READER()); + if ($hashref) { + my @queries=split(/\&/,$what); + my $qresult=''; + + for (my $i=0;$i<=$#queries;$i++) { + $qresult.="$hashref->{$queries[$i]}&"; # Presumably failure gives empty string. + } + $qresult=~s/\&$//; # Remove trailing & from last lookup. + if (&untie_user_hash($hashref)) { + return $qresult; + } else { + return "error: ".($!+0)." untie (GDBM) Failed"; + } + } else { + if ($!+0 == 2) { + return "error:No such file or GDBM reported bad block error"; + } else { + return "error: ".($!+0)." tie (GDBM) Failed"; + } + } + +} +#--------------------- Request Handlers -------------------------------------------- +# +# By convention each request handler registers itself prior to the sub +# declaration: +# + +#++ +# +# Handles ping requests. +# Parameters: +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $replyfd- File descriptor connected to the client +# Implicit Inputs: +# $currenthostid - Global variable that carries the name of the host we are +# known as. +# Returns: +# 1 - Ok to continue processing. +# 0 - Program should exit. +# Side effects: +# Reply information is sent to the client. +sub ping_handler { + my ($cmd, $tail, $client) = @_; + Debug("$cmd $tail $client .. $currenthostid:"); + + Reply( $client,"$currenthostid\n","$cmd:$tail"); + + return 1; +} +®ister_handler("ping", \&ping_handler, 0, 1, 1); # Ping unencoded, client or manager. + +#++ +# +# Handles pong requests. Pong replies with our current host id, and +# the results of a ping sent to us via our lonc. +# +# Parameters: +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $replyfd- File descriptor connected to the client +# Implicit Inputs: +# $currenthostid - Global variable that carries the name of the host we are +# connected to. +# Returns: +# 1 - Ok to continue processing. +# 0 - Program should exit. +# Side effects: +# Reply information is sent to the client. +sub pong_handler { + my ($cmd, $tail, $replyfd) = @_; + + my $reply=&reply("ping",$clientname); + &Reply( $replyfd, "$currenthostid:$reply\n", "$cmd:$tail"); + return 1; +} +®ister_handler("pong", \&pong_handler, 0, 1, 1); # Pong unencoded, client or manager + +#++ +# Called to establish an encrypted session key with the remote client. +# Note that with secure lond, in most cases this function is never +# invoked. Instead, the secure session key is established either +# via a local file that's locked down tight and only lives for a short +# time, or via an ssl tunnel...and is generated from a bunch-o-random +# bits from /dev/urandom, rather than the predictable pattern used by +# by this sub. This sub is only used in the old-style insecure +# key negotiation. +# Parameters: +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $replyfd- File descriptor connected to the client +# Implicit Inputs: +# $currenthostid - Global variable that carries the name of the host +# known as. +# $clientname - Global variable that carries the name of the hsot we're connected to. +# Returns: +# 1 - Ok to continue processing. +# 0 - Program should exit. +# Implicit Outputs: +# Reply information is sent to the client. +# $cipher is set with a reference to a new IDEA encryption object. +# +sub establish_key_handler { + my ($cmd, $tail, $replyfd) = @_; + + my $buildkey=time.$$.int(rand 100000); + $buildkey=~tr/1-6/A-F/; + $buildkey=int(rand 100000).$buildkey.int(rand 100000); + my $key=$currenthostid.$clientname; + $key=~tr/a-z/A-Z/; + $key=~tr/G-P/0-9/; + $key=~tr/Q-Z/0-9/; + $key=$key.$buildkey.$key.$buildkey.$key.$buildkey; + $key=substr($key,0,32); + my $cipherkey=pack("H32",$key); + $cipher=new IDEA $cipherkey; + &Reply($replyfd, "$buildkey\n", "$cmd:$tail"); + + return 1; + +} +®ister_handler("ekey", \&establish_key_handler, 0, 1,1); + +# Handler for the load command. Returns the current system load average +# to the requestor. +# +# Parameters: +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $replyfd- File descriptor connected to the client +# Implicit Inputs: +# $currenthostid - Global variable that carries the name of the host +# known as. +# $clientname - Global variable that carries the name of the hsot we're connected to. +# Returns: +# 1 - Ok to continue processing. +# 0 - Program should exit. +# Side effects: +# Reply information is sent to the client. +sub load_handler { + my ($cmd, $tail, $replyfd) = @_; + + # Get the load average from /proc/loadavg and calculate it as a percentage of + # the allowed load limit as set by the perl global variable lonLoadLim + + my $loadavg; + my $loadfile=IO::File->new('/proc/loadavg'); + + $loadavg=<$loadfile>; + $loadavg =~ s/\s.*//g; # Extract the first field only. + + my $loadpercent=100*$loadavg/$perlvar{'lonLoadLim'}; + + &Reply( $replyfd, "$loadpercent\n", "$cmd:$tail"); + + return 1; +} +®ister_handler("load", \&load_handler, 0, 1, 0); + +# +# Process the userload request. This sub returns to the client the current +# user load average. It can be invoked either by clients or managers. +# +# Parameters: +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $replyfd- File descriptor connected to the client +# Implicit Inputs: +# $currenthostid - Global variable that carries the name of the host +# known as. +# $clientname - Global variable that carries the name of the hsot we're connected to. +# Returns: +# 1 - Ok to continue processing. +# 0 - Program should exit +# Implicit inputs: +# whatever the userload() function requires. +# Implicit outputs: +# the reply is written to the client. +# +sub user_load_handler { + my ($cmd, $tail, $replyfd) = @_; + + my $userloadpercent=&userload(); + &Reply($replyfd, "$userloadpercent\n", "$cmd:$tail"); + + return 1; +} +®ister_handler("userload", \&user_load_handler, 0, 1, 0); + +# Process a request for the authorization type of a user: +# (userauth). +# +# Parameters: +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $replyfd- File descriptor connected to the client +# Returns: +# 1 - Ok to continue processing. +# 0 - Program should exit +# Implicit outputs: +# The user authorization type is written to the client. +# +sub user_authorization_type { + my ($cmd, $tail, $replyfd) = @_; + + my $userinput = "$cmd:$tail"; + + # Pull the domain and username out of the command tail. + # and call get_auth_type to determine the authentication type. + + my ($udom,$uname)=split(/:/,$tail); + my $result = &get_auth_type($udom, $uname); + if($result eq "nouser") { + &Failure( $replyfd, "unknown_user\n", $userinput); + } else { + # + # We only want to pass the second field from get_auth_type + # for ^krb.. otherwise we'll be handing out the encrypted + # password for internals e.g. + # + my ($type,$otherinfo) = split(/:/,$result); + if($type =~ /^krb/) { + $type = $result; + } else { + $type .= ':'; + } + &Reply( $replyfd, "$type\n", $userinput); + } + + return 1; +} +®ister_handler("currentauth", \&user_authorization_type, 1, 1, 0); + +# Process a request by a manager to push a hosts or domain table +# to us. We pick apart the command and pass it on to the subs +# that already exist to do this. +# +# Parameters: +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $client - File descriptor connected to the client +# Returns: +# 1 - Ok to continue processing. +# 0 - Program should exit +# Implicit Output: +# a reply is written to the client. +sub push_file_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + # At this time we only know that the IP of our partner is a valid manager + # the code below is a hook to do further authentication (e.g. to resolve + # spoofing). + + my $cert = &GetCertificate($userinput); + if(&ValidManager($cert)) { + + # Now presumably we have the bona fides of both the peer host and the + # process making the request. + + my $reply = &PushFile($userinput); + &Reply($client, "$reply\n", $userinput); + + } else { + &Failure( $client, "refused\n", $userinput); + } + return 1; +} +®ister_handler("pushfile", \&push_file_handler, 1, 0, 1); + +# +# du - list the disk usuage of a directory recursively. +# +# note: stolen code from the ls file handler +# under construction by Rick Banghart +# . +# Parameters: +# $cmd - The command that dispatched us (du). +# $ududir - The directory path to list... I'm not sure what this +# is relative as things like ls:. return e.g. +# no_such_dir. +# $client - Socket open on the client. +# Returns: +# 1 - indicating that the daemon should not disconnect. +# Side Effects: +# The reply is written to $client. +# +sub du_handler { + my ($cmd, $ududir, $client) = @_; + my ($ududir) = split(/:/,$ududir); # Make 'telnet' testing easier. + my $userinput = "$cmd:$ududir"; + + if ($ududir=~/\.\./ || $ududir!~m|^/home/httpd/|) { + &Failure($client,"refused\n","$cmd:$ududir"); + return 1; + } + # Since $ududir could have some nasties in it, + # we will require that ududir is a valid + # directory. Just in case someone tries to + # slip us a line like .;(cd /home/httpd rm -rf*) + # etc. + # + if (-d $ududir) { + my $total_size=0; + my $code=sub { + if ($_=~/\.\d+\./) { return;} + if ($_=~/\.meta$/) { return;} + $total_size+=(stat($_))[7]; + }; + chdir($ududir); + find($code,$ududir); + $total_size=int($total_size/1024); + &Reply($client,"$total_size\n","$cmd:$ududir"); + } else { + &Failure($client, "bad_directory:$ududir\n","$cmd:$ududir"); + } + return 1; +} +®ister_handler("du", \&du_handler, 0, 1, 0); + +# +# The ls_handler routine should be considered obosolete and is retained +# for communication with legacy servers. Please see the ls2_handler. +# +# ls - list the contents of a directory. For each file in the +# selected directory the filename followed by the full output of +# the stat function is returned. The returned info for each +# file are separated by ':'. The stat fields are separated by &'s. +# Parameters: +# $cmd - The command that dispatched us (ls). +# $ulsdir - The directory path to list... I'm not sure what this +# is relative as things like ls:. return e.g. +# no_such_dir. +# $client - Socket open on the client. +# Returns: +# 1 - indicating that the daemon should not disconnect. +# Side Effects: +# The reply is written to $client. +# +sub ls_handler { + # obsoleted by ls2_handler + my ($cmd, $ulsdir, $client) = @_; + + my $userinput = "$cmd:$ulsdir"; + + my $obs; + my $rights; + my $ulsout=''; + my $ulsfn; + if (-e $ulsdir) { + if(-d $ulsdir) { + if (opendir(LSDIR,$ulsdir)) { + while ($ulsfn=readdir(LSDIR)) { + undef($obs); + undef($rights); + my @ulsstats=stat($ulsdir.'/'.$ulsfn); + #We do some obsolete checking here + if(-e $ulsdir.'/'.$ulsfn.".meta") { + open(FILE, $ulsdir.'/'.$ulsfn.".meta"); + my @obsolete=; + foreach my $obsolete (@obsolete) { + if($obsolete =~ m/()(on|1)/) { $obs = 1; } + if($obsolete =~ m|()(default)|) { $rights = 1; } + } + } + $ulsout.=$ulsfn.'&'.join('&',@ulsstats); + if($obs eq '1') { $ulsout.="&1"; } + else { $ulsout.="&0"; } + if($rights eq '1') { $ulsout.="&1:"; } + else { $ulsout.="&0:"; } + } + closedir(LSDIR); + } + } else { + my @ulsstats=stat($ulsdir); + $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':'; + } + } else { + $ulsout='no_such_dir'; + } + if ($ulsout eq '') { $ulsout='empty'; } + &Reply($client, "$ulsout\n", $userinput); # This supports debug logging. + + return 1; + +} +®ister_handler("ls", \&ls_handler, 0, 1, 0); + +# +# Please also see the ls_handler, which this routine obosolets. +# ls2_handler differs from ls_handler in that it escapes its return +# values before concatenating them together with ':'s. +# +# ls2 - list the contents of a directory. For each file in the +# selected directory the filename followed by the full output of +# the stat function is returned. The returned info for each +# file are separated by ':'. The stat fields are separated by &'s. +# Parameters: +# $cmd - The command that dispatched us (ls). +# $ulsdir - The directory path to list... I'm not sure what this +# is relative as things like ls:. return e.g. +# no_such_dir. +# $client - Socket open on the client. +# Returns: +# 1 - indicating that the daemon should not disconnect. +# Side Effects: +# The reply is written to $client. +# +sub ls2_handler { + my ($cmd, $ulsdir, $client) = @_; + + my $userinput = "$cmd:$ulsdir"; + + my $obs; + my $rights; + my $ulsout=''; + my $ulsfn; + if (-e $ulsdir) { + if(-d $ulsdir) { + if (opendir(LSDIR,$ulsdir)) { + while ($ulsfn=readdir(LSDIR)) { + undef($obs); + undef($rights); + my @ulsstats=stat($ulsdir.'/'.$ulsfn); + #We do some obsolete checking here + if(-e $ulsdir.'/'.$ulsfn.".meta") { + open(FILE, $ulsdir.'/'.$ulsfn.".meta"); + my @obsolete=; + foreach my $obsolete (@obsolete) { + if($obsolete =~ m/()(on|1)/) { $obs = 1; } + if($obsolete =~ m|()(default)|) { + $rights = 1; + } + } + } + my $tmp = $ulsfn.'&'.join('&',@ulsstats); + if ($obs eq '1') { $tmp.="&1"; } else { $tmp.="&0"; } + if ($rights eq '1') { $tmp.="&1"; } else { $tmp.="&0"; } + $ulsout.= &escape($tmp).':'; + } + closedir(LSDIR); + } + } else { + my @ulsstats=stat($ulsdir); + $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':'; + } + } else { + $ulsout='no_such_dir'; + } + if ($ulsout eq '') { $ulsout='empty'; } + &Reply($client, "$ulsout\n", $userinput); # This supports debug logging. + return 1; +} +®ister_handler("ls2", \&ls2_handler, 0, 1, 0); + +# Process a reinit request. Reinit requests that either +# lonc or lond be reinitialized so that an updated +# host.tab or domain.tab can be processed. +# +# Parameters: +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $client - File descriptor connected to the client +# Returns: +# 1 - Ok to continue processing. +# 0 - Program should exit +# Implicit output: +# a reply is sent to the client. +# +sub reinit_process_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + my $cert = &GetCertificate($userinput); + if(&ValidManager($cert)) { + chomp($userinput); + my $reply = &ReinitProcess($userinput); + &Reply( $client, "$reply\n", $userinput); + } else { + &Failure( $client, "refused\n", $userinput); + } + return 1; +} +®ister_handler("reinit", \&reinit_process_handler, 1, 0, 1); + +# Process the editing script for a table edit operation. +# the editing operation must be encrypted and requested by +# a manager host. +# +# Parameters: +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $client - File descriptor connected to the client +# Returns: +# 1 - Ok to continue processing. +# 0 - Program should exit +# Implicit output: +# a reply is sent to the client. +# +sub edit_table_handler { + my ($command, $tail, $client) = @_; + + my $userinput = "$command:$tail"; + + my $cert = &GetCertificate($userinput); + if(&ValidManager($cert)) { + my($filetype, $script) = split(/:/, $tail); + if (($filetype eq "hosts") || + ($filetype eq "domain")) { + if($script ne "") { + &Reply($client, # BUGBUG - EditFile + &EditFile($userinput), # could fail. + $userinput); + } else { + &Failure($client,"refused\n",$userinput); + } + } else { + &Failure($client,"refused\n",$userinput); + } + } else { + &Failure($client,"refused\n",$userinput); + } + return 1; +} +®ister_handler("edit", \&edit_table_handler, 1, 0, 1); + +# +# Authenticate a user against the LonCAPA authentication +# database. Note that there are several authentication +# possibilities: +# - unix - The user can be authenticated against the unix +# password file. +# - internal - The user can be authenticated against a purely +# internal per user password file. +# - kerberos - The user can be authenticated against either a kerb4 or kerb5 +# ticket granting authority. +# - user - The person tailoring LonCAPA can supply a user authentication +# mechanism that is per system. +# +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# Implicit inputs: +# The authentication systems describe above have their own forms of implicit +# input into the authentication process that are described above. +# +sub authenticate_handler { + my ($cmd, $tail, $client) = @_; + + + # Regenerate the full input line + + my $userinput = $cmd.":".$tail; + + # udom - User's domain. + # uname - Username. + # upass - User's password. + + my ($udom,$uname,$upass)=split(/:/,$tail); + &Debug(" Authenticate domain = $udom, user = $uname, password = $upass"); + chomp($upass); + $upass=&unescape($upass); + + my $pwdcorrect = &validate_user($udom, $uname, $upass); + if($pwdcorrect) { + &Reply( $client, "authorized\n", $userinput); + # + # Bad credentials: Failed to authorize + # + } else { + &Failure( $client, "non_authorized\n", $userinput); + } + + return 1; +} +®ister_handler("auth", \&authenticate_handler, 1, 1, 0); + +# +# Change a user's password. Note that this function is complicated by +# the fact that a user may be authenticated in more than one way: +# At present, we are not able to change the password for all types of +# authentication methods. Only for: +# unix - unix password or shadow passoword style authentication. +# local - Locally written authentication mechanism. +# For now, kerb4 and kerb5 password changes are not supported and result +# in an error. +# FUTURE WORK: +# Support kerberos passwd changes? +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# Implicit inputs: +# The authentication systems describe above have their own forms of implicit +# input into the authentication process that are described above. +sub change_password_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = $cmd.":".$tail; # Reconstruct client's string. + + # + # udom - user's domain. + # uname - Username. + # upass - Current password. + # npass - New password. + + my ($udom,$uname,$upass,$npass)=split(/:/,$tail); + + $upass=&unescape($upass); + $npass=&unescape($npass); + &Debug("Trying to change password for $uname"); + + # First require that the user can be authenticated with their + # old password: + + my $validated = &validate_user($udom, $uname, $upass); + if($validated) { + my $realpasswd = &get_auth_type($udom, $uname); # Defined since authd. + + my ($howpwd,$contentpwd)=split(/:/,$realpasswd); + if ($howpwd eq 'internal') { + &Debug("internal auth"); + my $salt=time; + $salt=substr($salt,6,2); + my $ncpass=crypt($npass,$salt); + if(&rewrite_password_file($udom, $uname, "internal:$ncpass")) { + &logthis("Result of password change for " + ."$uname: pwchange_success"); + &Reply($client, "ok\n", $userinput); + } else { + &logthis("Unable to open $uname passwd " + ."to change password"); + &Failure( $client, "non_authorized\n",$userinput); + } + } elsif ($howpwd eq 'unix') { + my $result = &change_unix_password($uname, $npass); + &logthis("Result of password change for $uname: ". + $result); + &Reply($client, "$result\n", $userinput); + } else { + # this just means that the current password mode is not + # one we know how to change (e.g the kerberos auth modes or + # locally written auth handler). + # + &Failure( $client, "auth_mode_error\n", $userinput); + } + + } else { + &Failure( $client, "non_authorized\n", $userinput); + } + + return 1; +} +®ister_handler("passwd", \&change_password_handler, 1, 1, 0); + +# +# Create a new user. User in this case means a lon-capa user. +# The user must either already exist in some authentication realm +# like kerberos or the /etc/passwd. If not, a user completely local to +# this loncapa system is created. +# +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# Implicit inputs: +# The authentication systems describe above have their own forms of implicit +# input into the authentication process that are described above. +sub add_user_handler { + + my ($cmd, $tail, $client) = @_; + + + my ($udom,$uname,$umode,$npass)=split(/:/,$tail); + my $userinput = $cmd.":".$tail; # Reconstruct the full request line. + + &Debug("cmd =".$cmd." $udom =".$udom." uname=".$uname); + + + if($udom eq $currentdomainid) { # Reject new users for other domains... + + my $oldumask=umask(0077); + chomp($npass); + $npass=&unescape($npass); + my $passfilename = &password_path($udom, $uname); + &Debug("Password file created will be:".$passfilename); + if (-e $passfilename) { + &Failure( $client, "already_exists\n", $userinput); + } else { + my $fperror=''; + if (!&mkpath($passfilename)) { + $fperror="error: ".($!+0)." mkdir failed while attempting " + ."makeuser"; + } + unless ($fperror) { + my $result=&make_passwd_file($uname, $umode,$npass, $passfilename); + &Reply($client, $result, $userinput); #BUGBUG - could be fail + } else { + &Failure($client, "$fperror\n", $userinput); + } + } + umask($oldumask); + } else { + &Failure($client, "not_right_domain\n", + $userinput); # Even if we are multihomed. + + } + return 1; + +} +®ister_handler("makeuser", \&add_user_handler, 1, 1, 0); + +# +# Change the authentication method of a user. Note that this may +# also implicitly change the user's password if, for example, the user is +# joining an existing authentication realm. Known authentication realms at +# this time are: +# internal - Purely internal password file (only loncapa knows this user) +# local - Institutionally written authentication module. +# unix - Unix user (/etc/passwd with or without /etc/shadow). +# kerb4 - kerberos version 4 +# kerb5 - kerberos version 5 +# +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# Implicit inputs: +# The authentication systems describe above have their own forms of implicit +# input into the authentication process that are described above. +# NOTE: +# This is also used to change the authentication credential values (e.g. passwd). +# +# +sub change_authentication_handler { + + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; # Reconstruct user input. + + my ($udom,$uname,$umode,$npass)=split(/:/,$tail); + &Debug("cmd = ".$cmd." domain= ".$udom."uname =".$uname." umode= ".$umode); + if ($udom ne $currentdomainid) { + &Failure( $client, "not_right_domain\n", $client); + } else { + + chomp($npass); + + $npass=&unescape($npass); + my $oldauth = &get_auth_type($udom, $uname); # Get old auth info. + my $passfilename = &password_path($udom, $uname); + if ($passfilename) { # Not allowed to create a new user!! + # If just changing the unix passwd. need to arrange to run + # passwd since otherwise make_passwd_file will run + # lcuseradd which fails if an account already exists + # (to prevent an unscrupulous LONCAPA admin from stealing + # an existing account by overwriting it as a LonCAPA account). + + if(($oldauth =~/^unix/) && ($umode eq "unix")) { + my $result = &change_unix_password($uname, $npass); + &logthis("Result of password change for $uname: ".$result); + if ($result eq "ok") { + &Reply($client, "$result\n") + } else { + &Failure($client, "$result\n"); + } + } else { + my $result=&make_passwd_file($uname, $umode,$npass,$passfilename); + # + # If the current auth mode is internal, and the old auth mode was + # unix, or krb*, and the user is an author for this domain, + # re-run manage_permissions for that role in order to be able + # to take ownership of the construction space back to www:www + # + + + if( (($oldauth =~ /^unix/) && ($umode eq "internal")) || + (($oldauth =~ /^internal/) && ($umode eq "unix")) ) { + if(&is_author($udom, $uname)) { + &Debug(" Need to manage author permissions..."); + &manage_permissions("/$udom/_au", $udom, $uname, "$umode:"); + } + } + &Reply($client, $result, $userinput); + } + + + } else { + &Failure($client, "non_authorized\n", $userinput); # Fail the user now. + } + } + return 1; +} +®ister_handler("changeuserauth", \&change_authentication_handler, 1,1, 0); + +# +# Determines if this is the home server for a user. The home server +# for a user will have his/her lon-capa passwd file. Therefore all we need +# to do is determine if this file exists. +# +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# Implicit inputs: +# The authentication systems describe above have their own forms of implicit +# input into the authentication process that are described above. +# +sub is_home_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + my ($udom,$uname)=split(/:/,$tail); + chomp($uname); + my $passfile = &password_filename($udom, $uname); + if($passfile) { + &Reply( $client, "found\n", $userinput); + } else { + &Failure($client, "not_found\n", $userinput); + } + return 1; +} +®ister_handler("home", \&is_home_handler, 0,1,0); + +# +# Process an update request for a resource?? I think what's going on here is +# that a resource has been modified that we hold a subscription to. +# If the resource is not local, then we must update, or at least invalidate our +# cached copy of the resource. +# FUTURE WORK: +# I need to look at this logic carefully. My druthers would be to follow +# typical caching logic, and simple invalidate the cache, drop any subscription +# an let the next fetch start the ball rolling again... however that may +# actually be more difficult than it looks given the complex web of +# proxy servers. +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# Implicit inputs: +# The authentication systems describe above have their own forms of implicit +# input into the authentication process that are described above. +# +sub update_resource_handler { + + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + my $fname= $tail; # This allows interactive testing + + + my $ownership=ishome($fname); + if ($ownership eq 'not_owner') { + if (-e $fname) { + my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size, + $atime,$mtime,$ctime,$blksize,$blocks)=stat($fname); + my $now=time; + my $since=$now-$atime; + if ($since>$perlvar{'lonExpire'}) { + my $reply=&reply("unsub:$fname","$clientname"); + &devalidate_meta_cache($fname); + unlink("$fname"); + } else { + my $transname="$fname.in.transfer"; + my $remoteurl=&reply("sub:$fname","$clientname"); + my $response; + alarm(120); + { + my $ua=new LWP::UserAgent; + my $request=new HTTP::Request('GET',"$remoteurl"); + $response=$ua->request($request,$transname); + } + alarm(0); + if ($response->is_error()) { + unlink($transname); + my $message=$response->status_line; + &logthis("LWP GET: $message for $fname ($remoteurl)"); + } else { + if ($remoteurl!~/\.meta$/) { + alarm(120); + { + my $ua=new LWP::UserAgent; + my $mrequest=new HTTP::Request('GET',$remoteurl.'.meta'); + my $mresponse=$ua->request($mrequest,$fname.'.meta'); + if ($mresponse->is_error()) { + unlink($fname.'.meta'); + } + } + alarm(0); + } + rename($transname,$fname); + &devalidate_meta_cache($fname); + } + } + &Reply( $client, "ok\n", $userinput); + } else { + &Failure($client, "not_found\n", $userinput); + } + } else { + &Failure($client, "rejected\n", $userinput); + } + return 1; +} +®ister_handler("update", \&update_resource_handler, 0 ,1, 0); + +sub devalidate_meta_cache { + my ($url) = @_; + use Cache::Memcached; + my $memcache = new Cache::Memcached({'servers'=>['127.0.0.1:11211']}); + $url = &declutter($url); + $url =~ s-\.meta$--; + my $id = &escape('meta:'.$url); + $memcache->delete($id); +} + +sub declutter { + my $thisfn=shift; + $thisfn=~s/^\Q$perlvar{'lonDocRoot'}\E//; + $thisfn=~s/^\///; + $thisfn=~s|^adm/wrapper/||; + $thisfn=~s|^adm/coursedocs/showdoc/||; + $thisfn=~s/^res\///; + $thisfn=~s/\?.+$//; + return $thisfn; +} +# +# Fetch a user file from a remote server to the user's home directory +# userfiles subdir. +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# +sub fetch_user_file_handler { + + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + my $fname = $tail; + my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|); + my $udir=&propath($udom,$uname).'/userfiles'; + unless (-e $udir) { + mkdir($udir,0770); + } + Debug("fetch user file for $fname"); + if (-e $udir) { + $ufile=~s/^[\.\~]+//; + + # IF necessary, create the path right down to the file. + # Note that any regular files in the way of this path are + # wiped out to deal with some earlier folly of mine. + + if (!&mkpath($udir.'/'.$ufile)) { + &Failure($client, "unable_to_create\n", $userinput); + } + + my $destname=$udir.'/'.$ufile; + my $transname=$udir.'/'.$ufile.'.in.transit'; + my $remoteurl='http://'.$clientip.'/userfiles/'.$fname; + my $response; + Debug("Remote URL : $remoteurl Transfername $transname Destname: $destname"); + alarm(120); + { + my $ua=new LWP::UserAgent; + my $request=new HTTP::Request('GET',"$remoteurl"); + $response=$ua->request($request,$transname); + } + alarm(0); + if ($response->is_error()) { + unlink($transname); + my $message=$response->status_line; + &logthis("LWP GET: $message for $fname ($remoteurl)"); + &Failure($client, "failed\n", $userinput); + } else { + Debug("Renaming $transname to $destname"); + if (!rename($transname,$destname)) { + &logthis("Unable to move $transname to $destname"); + unlink($transname); + &Failure($client, "failed\n", $userinput); + } else { + &Reply($client, "ok\n", $userinput); + } + } + } else { + &Failure($client, "not_home\n", $userinput); + } + return 1; +} +®ister_handler("fetchuserfile", \&fetch_user_file_handler, 0, 1, 0); + +# +# Remove a file from a user's home directory userfiles subdirectory. +# Parameters: +# cmd - the Lond request keyword that got us here. +# tail - the part of the command past the keyword. +# client- File descriptor connected with the client. +# +# Returns: +# 1 - Continue processing. +sub remove_user_file_handler { + my ($cmd, $tail, $client) = @_; + + my ($fname) = split(/:/, $tail); # Get rid of any tailing :'s lonc may have sent. + + my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|); + if ($ufile =~m|/\.\./|) { + # any files paths with /../ in them refuse + # to deal with + &Failure($client, "refused\n", "$cmd:$tail"); + } else { + my $udir = &propath($udom,$uname); + if (-e $udir) { + my $file=$udir.'/userfiles/'.$ufile; + if (-e $file) { + # + # If the file is a regular file unlink is fine... + # However it's possible the client wants a dir. + # removed, in which case rmdir is more approprate: + # + if (-f $file){ + unlink($file); + } elsif(-d $file) { + rmdir($file); + } + if (-e $file) { + # File is still there after we deleted it ?!? + + &Failure($client, "failed\n", "$cmd:$tail"); + } else { + &Reply($client, "ok\n", "$cmd:$tail"); + } + } else { + &Failure($client, "not_found\n", "$cmd:$tail"); + } + } else { + &Failure($client, "not_home\n", "$cmd:$tail"); + } + } + return 1; +} +®ister_handler("removeuserfile", \&remove_user_file_handler, 0,1,0); + +# +# make a directory in a user's home directory userfiles subdirectory. +# Parameters: +# cmd - the Lond request keyword that got us here. +# tail - the part of the command past the keyword. +# client- File descriptor connected with the client. +# +# Returns: +# 1 - Continue processing. +sub mkdir_user_file_handler { + my ($cmd, $tail, $client) = @_; + + my ($dir) = split(/:/, $tail); # Get rid of any tailing :'s lonc may have sent. + $dir=&unescape($dir); + my ($udom,$uname,$ufile) = ($dir =~ m|^([^/]+)/([^/]+)/(.+)$|); + if ($ufile =~m|/\.\./|) { + # any files paths with /../ in them refuse + # to deal with + &Failure($client, "refused\n", "$cmd:$tail"); + } else { + my $udir = &propath($udom,$uname); + if (-e $udir) { + my $newdir=$udir.'/userfiles/'.$ufile.'/'; + if (!&mkpath($newdir)) { + &Failure($client, "failed\n", "$cmd:$tail"); + } + &Reply($client, "ok\n", "$cmd:$tail"); + } else { + &Failure($client, "not_home\n", "$cmd:$tail"); + } + } + return 1; +} +®ister_handler("mkdiruserfile", \&mkdir_user_file_handler, 0,1,0); + +# +# rename a file in a user's home directory userfiles subdirectory. +# Parameters: +# cmd - the Lond request keyword that got us here. +# tail - the part of the command past the keyword. +# client- File descriptor connected with the client. +# +# Returns: +# 1 - Continue processing. +sub rename_user_file_handler { + my ($cmd, $tail, $client) = @_; + + my ($udom,$uname,$old,$new) = split(/:/, $tail); + $old=&unescape($old); + $new=&unescape($new); + if ($new =~m|/\.\./| || $old =~m|/\.\./|) { + # any files paths with /../ in them refuse to deal with + &Failure($client, "refused\n", "$cmd:$tail"); + } else { + my $udir = &propath($udom,$uname); + if (-e $udir) { + my $oldfile=$udir.'/userfiles/'.$old; + my $newfile=$udir.'/userfiles/'.$new; + if (-e $newfile) { + &Failure($client, "exists\n", "$cmd:$tail"); + } elsif (! -e $oldfile) { + &Failure($client, "not_found\n", "$cmd:$tail"); + } else { + if (!rename($oldfile,$newfile)) { + &Failure($client, "failed\n", "$cmd:$tail"); + } else { + &Reply($client, "ok\n", "$cmd:$tail"); + } + } + } else { + &Failure($client, "not_home\n", "$cmd:$tail"); + } + } + return 1; +} +®ister_handler("renameuserfile", \&rename_user_file_handler, 0,1,0); + +# +# Authenticate access to a user file by checking that the token the user's +# passed also exists in their session file +# +# Parameters: +# cmd - The request keyword that dispatched to tus. +# tail - The tail of the request (colon separated parameters). +# client - Filehandle open on the client. +# Return: +# 1. +sub token_auth_user_file_handler { + my ($cmd, $tail, $client) = @_; + + my ($fname, $session) = split(/:/, $tail); + + chomp($session); + my $reply="non_auth\n"; + if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'. + $session.'.id')) { + while (my $line=) { + if ($line=~ m|userfile\.\Q$fname\E\=|) { $reply="ok\n"; } + } + close(ENVIN); + &Reply($client, $reply, "$cmd:$tail"); + } else { + &Failure($client, "invalid_token\n", "$cmd:$tail"); + } + return 1; + +} +®ister_handler("tokenauthuserfile", \&token_auth_user_file_handler, 0,1,0); + +# +# Unsubscribe from a resource. +# +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# +sub unsubscribe_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput= "$cmd:$tail"; + + my ($fname) = split(/:/,$tail); # Split in case there's extrs. + + &Debug("Unsubscribing $fname"); + if (-e $fname) { + &Debug("Exists"); + &Reply($client, &unsub($fname,$clientip), $userinput); + } else { + &Failure($client, "not_found\n", $userinput); + } + return 1; +} +®ister_handler("unsub", \&unsubscribe_handler, 0, 1, 0); + +# Subscribe to a resource +# +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# +sub subscribe_handler { + my ($cmd, $tail, $client)= @_; + + my $userinput = "$cmd:$tail"; + + &Reply( $client, &subscribe($userinput,$clientip), $userinput); + + return 1; +} +®ister_handler("sub", \&subscribe_handler, 0, 1, 0); + +# +# Determine the version of a resource (?) Or is it return +# the top version of the resource? Not yet clear from the +# code in currentversion. +# +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# +sub current_version_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput= "$cmd:$tail"; + + my $fname = $tail; + &Reply( $client, ¤tversion($fname)."\n", $userinput); + return 1; + +} +®ister_handler("currentversion", \¤t_version_handler, 0, 1, 0); + +# Make an entry in a user's activity log. +# +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# +sub activity_log_handler { + my ($cmd, $tail, $client) = @_; + + + my $userinput= "$cmd:$tail"; + + my ($udom,$uname,$what)=split(/:/,$tail); + chomp($what); + my $proname=&propath($udom,$uname); + my $now=time; + my $hfh; + if ($hfh=IO::File->new(">>$proname/activity.log")) { + print $hfh "$now:$clientname:$what\n"; + &Reply( $client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." IO::File->new Failed " + ."while attempting log\n", + $userinput); + } + + return 1; +} +®ister_handler("log", \&activity_log_handler, 0, 1, 0); + +# +# Put a namespace entry in a user profile hash. +# My druthers would be for this to be an encrypted interaction too. +# anything that might be an inadvertent covert channel about either +# user authentication or user personal information.... +# +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# +sub put_user_profile_entry { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + my ($udom,$uname,$namespace,$what) =split(/:/,$tail,4); + if ($namespace ne 'roles') { + chomp($what); + my $hashref = &tie_user_hash($udom, $uname, $namespace, + &GDBM_WRCREAT(),"P",$what); + if($hashref) { + my @pairs=split(/\&/,$what); + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + $hashref->{$key}=$value; + } + if (&untie_user_hash($hashref)) { + &Reply( $client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) failed ". + "while attempting put\n", + $userinput); + } + } else { + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting put\n", $userinput); + } + } else { + &Failure( $client, "refused\n", $userinput); + } + + return 1; +} +®ister_handler("put", \&put_user_profile_entry, 0, 1, 0); + +# Put a piece of new data in hash, returns error if entry already exists +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# +sub newput_user_profile_entry { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + my ($udom,$uname,$namespace,$what) =split(/:/,$tail,4); + if ($namespace eq 'roles') { + &Failure( $client, "refused\n", $userinput); + return 1; + } + + chomp($what); + + my $hashref = &tie_user_hash($udom, $uname, $namespace, + &GDBM_WRCREAT(),"N",$what); + if(!$hashref) { + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting put\n", $userinput); + return 1; + } + + my @pairs=split(/\&/,$what); + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + if (exists($hashref->{$key})) { + &Failure($client, "key_exists: ".$key."\n",$userinput); + return 1; + } + } + + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + $hashref->{$key}=$value; + } + + if (&untie_user_hash($hashref)) { + &Reply( $client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) failed ". + "while attempting put\n", + $userinput); + } + return 1; +} +®ister_handler("newput", \&newput_user_profile_entry, 0, 1, 0); + +# +# Increment a profile entry in the user history file. +# The history contains keyword value pairs. In this case, +# The value itself is a pair of numbers. The first, the current value +# the second an increment that this function applies to the current +# value. +# +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# +sub increment_user_value_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + my ($udom,$uname,$namespace,$what) =split(/:/,$tail); + if ($namespace ne 'roles') { + chomp($what); + my $hashref = &tie_user_hash($udom, $uname, + $namespace, &GDBM_WRCREAT(), + "P",$what); + if ($hashref) { + my @pairs=split(/\&/,$what); + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + $value = &unescape($value); + # We could check that we have a number... + if (! defined($value) || $value eq '') { + $value = 1; + } + $hashref->{$key}+=$value; + if ($namespace eq 'nohist_resourcetracker') { + if ($hashref->{$key} < 0) { + $hashref->{$key} = 0; + } + } + } + if (&untie_user_hash($hashref)) { + &Reply( $client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) failed ". + "while attempting inc\n", $userinput); + } + } else { + &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting inc\n", $userinput); + } + } else { + &Failure($client, "refused\n", $userinput); + } + + return 1; +} +®ister_handler("inc", \&increment_user_value_handler, 0, 1, 0); + +# +# Put a new role for a user. Roles are LonCAPA's packaging of permissions. +# Each 'role' a user has implies a set of permissions. Adding a new role +# for a person grants the permissions packaged with that role +# to that user when the role is selected. +# +# Parameters: +# $cmd - The command string (rolesput). +# $tail - The remainder of the request line. For rolesput this +# consists of a colon separated list that contains: +# The domain and user that is granting the role (logged). +# The domain and user that is getting the role. +# The roles being granted as a set of & separated pairs. +# each pair a key value pair. +# $client - File descriptor connected to the client. +# Returns: +# 0 - If the daemon should exit +# 1 - To continue processing. +# +# +sub roles_put_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + my ( $exedom, $exeuser, $udom, $uname, $what) = split(/:/,$tail); + + + my $namespace='roles'; + chomp($what); + my $hashref = &tie_user_hash($udom, $uname, $namespace, + &GDBM_WRCREAT(), "P", + "$exedom:$exeuser:$what"); + # + # Log the attempt to set a role. The {}'s here ensure that the file + # handle is open for the minimal amount of time. Since the flush + # is done on close this improves the chances the log will be an un- + # corrupted ordered thing. + if ($hashref) { + my $pass_entry = &get_auth_type($udom, $uname); + my ($auth_type,$pwd) = split(/:/, $pass_entry); + $auth_type = $auth_type.":"; + my @pairs=split(/\&/,$what); + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + &manage_permissions($key, $udom, $uname, + $auth_type); + $hashref->{$key}=$value; + } + if (&untie_user_hash($hashref)) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting rolesput\n", $userinput); + } + } else { + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting rolesput\n", $userinput); + } + return 1; +} +®ister_handler("rolesput", \&roles_put_handler, 1,1,0); # Encoded client only. + +# +# Deletes (removes) a role for a user. This is equivalent to removing +# a permissions package associated with the role from the user's profile. +# +# Parameters: +# $cmd - The command (rolesdel) +# $tail - The remainder of the request line. This consists +# of: +# The domain and user requesting the change (logged) +# The domain and user being changed. +# The roles being revoked. These are shipped to us +# as a bunch of & separated role name keywords. +# $client - The file handle open on the client. +# Returns: +# 1 - Continue processing +# 0 - Exit. +# +sub roles_delete_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + my ($exedom,$exeuser,$udom,$uname,$what)=split(/:/,$tail); + &Debug("cmd = ".$cmd." exedom= ".$exedom."user = ".$exeuser." udom=".$udom. + "what = ".$what); + my $namespace='roles'; + chomp($what); + my $hashref = &tie_user_hash($udom, $uname, $namespace, + &GDBM_WRCREAT(), "D", + "$exedom:$exeuser:$what"); + + if ($hashref) { + my @rolekeys=split(/\&/,$what); + + foreach my $key (@rolekeys) { + delete $hashref->{$key}; + } + if (&untie_user_hash($hashref)) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting rolesdel\n", $userinput); + } + } else { + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting rolesdel\n", $userinput); + } + + return 1; +} +®ister_handler("rolesdel", \&roles_delete_handler, 1,1, 0); # Encoded client only + +# Unencrypted get from a user's profile database. See +# GetProfileEntryEncrypted for a version that does end-to-end encryption. +# This function retrieves a keyed item from a specific named database in the +# user's directory. +# +# Parameters: +# $cmd - Command request keyword (get). +# $tail - Tail of the command. This is a colon separated list +# consisting of the domain and username that uniquely +# identifies the profile, +# The 'namespace' which selects the gdbm file to +# do the lookup in, +# & separated list of keys to lookup. Note that +# the values are returned as an & separated list too. +# $client - File descriptor open on the client. +# Returns: +# 1 - Continue processing. +# 0 - Exit. +# +sub get_profile_entry { + my ($cmd, $tail, $client) = @_; + + my $userinput= "$cmd:$tail"; + + my ($udom,$uname,$namespace,$what) = split(/:/,$tail); + chomp($what); + + my $replystring = read_profile($udom, $uname, $namespace, $what); + my ($first) = split(/:/,$replystring); + if($first ne "error") { + &Reply($client, "$replystring\n", $userinput); + } else { + &Failure($client, $replystring." while attempting get\n", $userinput); + } + return 1; + + +} +®ister_handler("get", \&get_profile_entry, 0,1,0); + +# +# Process the encrypted get request. Note that the request is sent +# in clear, but the reply is encrypted. This is a small covert channel: +# information about the sensitive keys is given to the snooper. Just not +# information about the values of the sensitive key. Hmm if I wanted to +# know these I'd snoop for the egets. Get the profile item names from them +# and then issue a get for them since there's no enforcement of the +# requirement of an encrypted get for particular profile items. If I +# were re-doing this, I'd force the request to be encrypted as well as the +# reply. I'd also just enforce encrypted transactions for all gets since +# that would prevent any covert channel snooping. +# +# Parameters: +# $cmd - Command keyword of request (eget). +# $tail - Tail of the command. See GetProfileEntry # for more information about this. +# $client - File open on the client. +# Returns: +# 1 - Continue processing +# 0 - server should exit. +sub get_profile_entry_encrypted { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + my ($cmd,$udom,$uname,$namespace,$what) = split(/:/,$userinput); + chomp($what); + my $qresult = read_profile($udom, $uname, $namespace, $what); + my ($first) = split(/:/, $qresult); + if($first ne "error") { + + if ($cipher) { + my $cmdlength=length($qresult); + $qresult.=" "; + my $encqresult=''; + for(my $encidx=0;$encidx<=$cmdlength;$encidx+=8) { + $encqresult.= unpack("H16", + $cipher->encrypt(substr($qresult, + $encidx, + 8))); + } + &Reply( $client, "enc:$cmdlength:$encqresult\n", $userinput); + } else { + &Failure( $client, "error:no_key\n", $userinput); + } + } else { + &Failure($client, "$qresult while attempting eget\n", $userinput); + + } + + return 1; +} +®ister_handler("eget", \&get_profile_entry_encrypted, 0, 1, 0); + +# +# Deletes a key in a user profile database. +# +# Parameters: +# $cmd - Command keyword (del). +# $tail - Command tail. IN this case a colon +# separated list containing: +# The domain and user that identifies uniquely +# the identity of the user. +# The profile namespace (name of the profile +# database file). +# & separated list of keywords to delete. +# $client - File open on client socket. +# Returns: +# 1 - Continue processing +# 0 - Exit server. +# +# +sub delete_profile_entry { + my ($cmd, $tail, $client) = @_; + + my $userinput = "cmd:$tail"; + + my ($udom,$uname,$namespace,$what) = split(/:/,$tail); + chomp($what); + my $hashref = &tie_user_hash($udom, $uname, $namespace, + &GDBM_WRCREAT(), + "D",$what); + if ($hashref) { + my @keys=split(/\&/,$what); + foreach my $key (@keys) { + delete($hashref->{$key}); + } + if (&untie_user_hash($hashref)) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting del\n", $userinput); + } + } else { + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting del\n", $userinput); + } + return 1; +} +®ister_handler("del", \&delete_profile_entry, 0, 1, 0); + +# +# List the set of keys that are defined in a profile database file. +# A successful reply from this will contain an & separated list of +# the keys. +# Parameters: +# $cmd - Command request (keys). +# $tail - Remainder of the request, a colon separated +# list containing domain/user that identifies the +# user being queried, and the database namespace +# (database filename essentially). +# $client - File open on the client. +# Returns: +# 1 - Continue processing. +# 0 - Exit the server. +# +sub get_profile_keys { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + my ($udom,$uname,$namespace)=split(/:/,$tail); + my $qresult=''; + my $hashref = &tie_user_hash($udom, $uname, $namespace, + &GDBM_READER()); + if ($hashref) { + foreach my $key (keys %$hashref) { + $qresult.="$key&"; + } + if (&untie_user_hash($hashref)) { + $qresult=~s/\&$//; + &Reply($client, "$qresult\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting keys\n", $userinput); + } + } else { + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting keys\n", $userinput); + } + + return 1; +} +®ister_handler("keys", \&get_profile_keys, 0, 1, 0); + +# +# Dump the contents of a user profile database. +# Note that this constitutes a very large covert channel too since +# the dump will return sensitive information that is not encrypted. +# The naive security assumption is that the session negotiation ensures +# our client is trusted and I don't believe that's assured at present. +# Sure want badly to go to ssl or tls. Of course if my peer isn't really +# a LonCAPA node they could have negotiated an encryption key too so >sigh<. +# +# Parameters: +# $cmd - The command request keyword (currentdump). +# $tail - Remainder of the request, consisting of a colon +# separated list that has the domain/username and +# the namespace to dump (database file). +# $client - file open on the remote client. +# Returns: +# 1 - Continue processing. +# 0 - Exit the server. +# +sub dump_profile_database { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + my ($udom,$uname,$namespace) = split(/:/,$tail); + my $hashref = &tie_user_hash($udom, $uname, $namespace, + &GDBM_READER()); + if ($hashref) { + # Structure of %data: + # $data{$symb}->{$parameter}=$value; + # $data{$symb}->{'v.'.$parameter}=$version; + # since $parameter will be unescaped, we do not + # have to worry about silly parameter names... + + my $qresult=''; + my %data = (); # A hash of anonymous hashes.. + while (my ($key,$value) = each(%$hashref)) { + my ($v,$symb,$param) = split(/:/,$key); + next if ($v eq 'version' || $symb eq 'keys'); + # making old style store entries '$ver:$symb:$key = $value' + # look like new '$ver:$symb = "$key=$value"' + if (defined($param)) { $value = $param.'='.$value; } + foreach my $pair (split(/\&/,$value)) { + my ($param,$value)=split(/=/,$pair); + next if (exists($data{$symb}) && + exists($data{$symb}->{$param}) && + $data{$symb}->{'v.'.$param} > $v); + $data{$symb}->{$param}=$value; + $data{$symb}->{'v.'.$param}=$v; + } + } + if (&untie_user_hash($hashref)) { + while (my ($symb,$param_hash) = each(%data)) { + while(my ($param,$value) = each (%$param_hash)){ + next if ($param =~ /^v\./); # Ignore versions... + # + # Just dump the symb=value pairs separated by & + # + $qresult.=$symb.':'.$param.'='.$value.'&'; + } + } + chop($qresult); + &Reply($client , "$qresult\n", $userinput); + } else { + &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting currentdump\n", $userinput); + } + } else { + &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting currentdump\n", $userinput); + } + + return 1; +} +®ister_handler("currentdump", \&dump_profile_database, 0, 1, 0); + +# +# Dump a profile database with an optional regular expression +# to match against the keys. In this dump, no effort is made +# to separate symb from version information. Presumably the +# databases that are dumped by this command are of a different +# structure. Need to look at this and improve the documentation of +# both this and the currentdump handler. +# Parameters: +# $cmd - The command keyword. +# $tail - All of the characters after the $cmd: +# These are expected to be a colon +# separated list containing: +# domain/user - identifying the user. +# namespace - identifying the database. +# regexp - optional regular expression +# that is matched against +# database keywords to do +# selective dumps. +# $client - Channel open on the client. +# Returns: +# 1 - Continue processing. +# Side effects: +# response is written to $client. +# +sub dump_with_regexp { + my ($cmd, $tail, $client) = @_; + + + my $userinput = "$cmd:$tail"; + + my ($udom,$uname,$namespace,$regexp,$range)=split(/:/,$tail); + if (defined($regexp)) { + $regexp=&unescape($regexp); + } else { + $regexp='.'; + } + my ($start,$end); + if (defined($range)) { + if ($range =~/^(\d+)\-(\d+)$/) { + ($start,$end) = ($1,$2); + } elsif ($range =~/^(\d+)$/) { + ($start,$end) = (0,$1); + } else { + undef($range); + } + } + my $hashref = &tie_user_hash($udom, $uname, $namespace, + &GDBM_READER()); + if ($hashref) { + my $qresult=''; + my $count=0; + while (my ($key,$value) = each(%$hashref)) { + if ($regexp eq '.') { + $count++; + if (defined($range) && $count >= $end) { last; } + if (defined($range) && $count < $start) { next; } + $qresult.=$key.'='.$value.'&'; + } else { + my $unescapeKey = &unescape($key); + if (eval('$unescapeKey=~/$regexp/')) { + $count++; + if (defined($range) && $count >= $end) { last; } + if (defined($range) && $count < $start) { next; } + $qresult.="$key=$value&"; + } + } + } + if (&untie_user_hash($hashref)) { + chop($qresult); + &Reply($client, "$qresult\n", $userinput); + } else { + &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting dump\n", $userinput); + } + } else { + &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting dump\n", $userinput); + } + + return 1; +} +®ister_handler("dump", \&dump_with_regexp, 0, 1, 0); + +# Store a set of key=value pairs associated with a versioned name. +# +# Parameters: +# $cmd - Request command keyword. +# $tail - Tail of the request. This is a colon +# separated list containing: +# domain/user - User and authentication domain. +# namespace - Name of the database being modified +# rid - Resource keyword to modify. +# what - new value associated with rid. +# +# $client - Socket open on the client. +# +# +# Returns: +# 1 (keep on processing). +# Side-Effects: +# Writes to the client +sub store_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + my ($udom,$uname,$namespace,$rid,$what) =split(/:/,$tail); + if ($namespace ne 'roles') { + + chomp($what); + my @pairs=split(/\&/,$what); + my $hashref = &tie_user_hash($udom, $uname, $namespace, + &GDBM_WRCREAT(), "S", + "$rid:$what"); + if ($hashref) { + my $now = time; + my @previouskeys=split(/&/,$hashref->{"keys:$rid"}); + my $key; + $hashref->{"version:$rid"}++; + my $version=$hashref->{"version:$rid"}; + my $allkeys=''; + foreach my $pair (@pairs) { + my ($key)=split(/=/,$pair); + $allkeys.=$key.':'; + } + $hashref->{"$version:$rid"}=$what."\×tamp=$now"; + $allkeys.='timestamp'; + $hashref->{"$version:keys:$rid"}=$allkeys; + if (&untie_user_hash($hashref)) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting store\n", $userinput); + } + } else { + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting store\n", $userinput); + } + } else { + &Failure($client, "refused\n", $userinput); + } + + return 1; +} +®ister_handler("store", \&store_handler, 0, 1, 0); + +# +# Dump out all versions of a resource that has key=value pairs associated +# with it for each version. These resources are built up via the store +# command. +# +# Parameters: +# $cmd - Command keyword. +# $tail - Remainder of the request which consists of: +# domain/user - User and auth. domain. +# namespace - name of resource database. +# rid - Resource id. +# $client - socket open on the client. +# +# Returns: +# 1 indicating the caller should not yet exit. +# Side-effects: +# Writes a reply to the client. +# The reply is a string of the following shape: +# version=current&version:keys=k1:k2...&1:k1=v1&1:k2=v2... +# Where the 1 above represents version 1. +# this continues for all pairs of keys in all versions. +# +# +# +# +sub restore_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; # Only used for logging purposes. + + my ($cmd,$udom,$uname,$namespace,$rid) = split(/:/,$userinput); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + chomp($rid); + my $qresult=''; + my $hashref = &tie_user_hash($udom, $uname, $namespace, &GDBM_READER()); + if ($hashref) { + my $version=$hashref->{"version:$rid"}; + $qresult.="version=$version&"; + my $scope; + for ($scope=1;$scope<=$version;$scope++) { + my $vkeys=$hashref->{"$scope:keys:$rid"}; + my @keys=split(/:/,$vkeys); + my $key; + $qresult.="$scope:keys=$vkeys&"; + if (exists($hashref->{"$scope:$rid"})) { + my $what=$hashref->{"$scope:$rid"}; + foreach my $pair (split(/\&/,$hashref->{"$scope:$rid"})) { + my ($key,$value)=split(/=/,$pair); + $qresult.="$scope:".$pair."&"; + } + } else { + foreach $key (@keys) { + $qresult.="$scope:$key=".$hashref->{"$scope:$rid:$key"}."&"; + } + } + } + if (&untie_user_hash($hashref)) { + $qresult=~s/\&$//; + &Reply( $client, "$qresult\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting restore\n", $userinput); + } + } else { + &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting restore\n", $userinput); + } + + return 1; + + +} +®ister_handler("restore", \&restore_handler, 0,1,0); + +# +# Add a chat message to to a discussion board. +# +# Parameters: +# $cmd - Request keyword. +# $tail - Tail of the command. A colon separated list +# containing: +# cdom - Domain on which the chat board lives +# cnum - Identifier of the discussion group. +# post - Body of the posting. +# $client - Socket open on the client. +# Returns: +# 1 - Indicating caller should keep on processing. +# +# Side-effects: +# writes a reply to the client. +# +# +sub send_chat_handler { + my ($cmd, $tail, $client) = @_; + + + my $userinput = "$cmd:$tail"; + + my ($cdom,$cnum,$newpost)=split(/\:/,$tail); + &chat_add($cdom,$cnum,$newpost); + &Reply($client, "ok\n", $userinput); + + return 1; +} +®ister_handler("chatsend", \&send_chat_handler, 0, 1, 0); + +# +# Retrieve the set of chat messagss from a discussion board. +# +# Parameters: +# $cmd - Command keyword that initiated the request. +# $tail - Remainder of the request after the command +# keyword. In this case a colon separated list of +# chat domain - Which discussion board. +# chat id - Discussion thread(?) +# domain/user - Authentication domain and username +# of the requesting person. +# $client - Socket open on the client program. +# Returns: +# 1 - continue processing +# Side effects: +# Response is written to the client. +# +sub retrieve_chat_handler { + my ($cmd, $tail, $client) = @_; + + + my $userinput = "$cmd:$tail"; + + my ($cdom,$cnum,$udom,$uname)=split(/\:/,$tail); + my $reply=''; + foreach (&get_chat($cdom,$cnum,$udom,$uname)) { + $reply.=&escape($_).':'; + } + $reply=~s/\:$//; + &Reply($client, $reply."\n", $userinput); + + + return 1; +} +®ister_handler("chatretr", \&retrieve_chat_handler, 0, 1, 0); + +# +# Initiate a query of an sql database. SQL query repsonses get put in +# a file for later retrieval. This prevents sql query results from +# bottlenecking the system. Note that with loncnew, perhaps this is +# less of an issue since multiple outstanding requests can be concurrently +# serviced. +# +# Parameters: +# $cmd - COmmand keyword that initiated the request. +# $tail - Remainder of the command after the keyword. +# For this function, this consists of a query and +# 3 arguments that are self-documentingly labelled +# in the original arg1, arg2, arg3. +# $client - Socket open on the client. +# Return: +# 1 - Indicating processing should continue. +# Side-effects: +# a reply is written to $client. +# +sub send_query_handler { + my ($cmd, $tail, $client) = @_; + + + my $userinput = "$cmd:$tail"; + + my ($query,$arg1,$arg2,$arg3)=split(/\:/,$tail); + $query=~s/\n*$//g; + &Reply($client, "". &sql_reply("$clientname\&$query". + "\&$arg1"."\&$arg2"."\&$arg3")."\n", + $userinput); + + return 1; +} +®ister_handler("querysend", \&send_query_handler, 0, 1, 0); + +# +# Add a reply to an sql query. SQL queries are done asyncrhonously. +# The query is submitted via a "querysend" transaction. +# There it is passed on to the lonsql daemon, queued and issued to +# mysql. +# This transaction is invoked when the sql transaction is complete +# it stores the query results in flie and indicates query completion. +# presumably local software then fetches this response... I'm guessing +# the sequence is: lonc does a querysend, we ask lonsql to do it. +# lonsql on completion of the query interacts with the lond of our +# client to do a query reply storing two files: +# - id - The results of the query. +# - id.end - Indicating the transaction completed. +# NOTE: id is a unique id assigned to the query and querysend time. +# Parameters: +# $cmd - Command keyword that initiated this request. +# $tail - Remainder of the tail. In this case that's a colon +# separated list containing the query Id and the +# results of the query. +# $client - Socket open on the client. +# Return: +# 1 - Indicating that we should continue processing. +# Side effects: +# ok written to the client. +# +sub reply_query_handler { + my ($cmd, $tail, $client) = @_; + + + my $userinput = "$cmd:$tail"; + + my ($cmd,$id,$reply)=split(/:/,$userinput); + my $store; + my $execdir=$perlvar{'lonDaemons'}; + if ($store=IO::File->new(">$execdir/tmp/$id")) { + $reply=~s/\&/\n/g; + print $store $reply; + close $store; + my $store2=IO::File->new(">$execdir/tmp/$id.end"); + print $store2 "done\n"; + close $store2; + &Reply($client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0) + ." IO::File->new Failed ". + "while attempting queryreply\n", $userinput); + } + + + return 1; +} +®ister_handler("queryreply", \&reply_query_handler, 0, 1, 0); + +# +# Process the courseidput request. Not quite sure what this means +# at the system level sense. It appears a gdbm file in the +# /home/httpd/lonUsers/$domain/nohist_courseids is tied and +# a set of entries made in that database. +# +# Parameters: +# $cmd - The command keyword that initiated this request. +# $tail - Tail of the command. In this case consists of a colon +# separated list contaning the domain to apply this to and +# an ampersand separated list of keyword=value pairs. +# Each value is a colon separated list that includes: +# description, institutional code and course owner. +# For backward compatibility with versions included +# in LON-CAPA 1.1.X (and earlier) and 1.2.X, institutional +# code and/or course owner are preserved from the existing +# record when writing a new record in response to 1.1 or +# 1.2 implementations of lonnet::flushcourselogs(). +# +# $client - Socket open on the client. +# Returns: +# 1 - indicating that processing should continue +# +# Side effects: +# reply is written to the client. +# +sub put_course_id_handler { + my ($cmd, $tail, $client) = @_; + + + my $userinput = "$cmd:$tail"; + + my ($udom, $what) = split(/:/, $tail,2); + chomp($what); + my $now=time; + my @pairs=split(/\&/,$what); + + my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT()); + if ($hashref) { + foreach my $pair (@pairs) { + my ($key,$courseinfo) = split(/=/,$pair,2); + $courseinfo =~ s/=/:/g; + + my @current_items = split(/:/,$hashref->{$key}); + shift(@current_items); # remove description + pop(@current_items); # remove last access + my $numcurrent = scalar(@current_items); + + my @new_items = split(/:/,$courseinfo); + my $numnew = scalar(@new_items); + if ($numcurrent > 0) { + if ($numnew == 1) { # flushcourselogs() from 1.1 or earlier + $courseinfo .= ':'.join(':',@current_items); + } elsif ($numnew == 2) { # flushcourselogs() from 1.2.X + $courseinfo .= ':'.$current_items[$numcurrent-1]; + } + } + $hashref->{$key}=$courseinfo.':'.$now; + } + if (&untie_domain_hash($hashref)) { + &Reply( $client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting courseidput\n", $userinput); + } + } else { + &Failure($client, "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting courseidput\n", $userinput); + } + + + return 1; +} +®ister_handler("courseidput", \&put_course_id_handler, 0, 1, 0); + +# Retrieves the value of a course id resource keyword pattern +# defined since a starting date. Both the starting date and the +# keyword pattern are optional. If the starting date is not supplied it +# is treated as the beginning of time. If the pattern is not found, +# it is treatred as "." matching everything. +# +# Parameters: +# $cmd - Command keyword that resulted in us being dispatched. +# $tail - The remainder of the command that, in this case, consists +# of a colon separated list of: +# domain - The domain in which the course database is +# defined. +# since - Optional parameter describing the minimum +# time of definition(?) of the resources that +# will match the dump. +# description - regular expression that is used to filter +# the dump. Only keywords matching this regexp +# will be used. +# institutional code - optional supplied code to filter +# the dump. Only courses with an institutional code +# that match the supplied code will be returned. +# owner - optional supplied username of owner to filter +# the dump. Only courses for which the course +# owner matches the supplied username will be +# returned. Implicit assumption that owner +# is a user in the domain in which the +# course database is defined. +# $client - The socket open on the client. +# Returns: +# 1 - Continue processing. +# Side Effects: +# a reply is written to $client. +sub dump_course_id_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + my ($udom,$since,$description,$instcodefilter,$ownerfilter,$coursefilter) =split(/:/,$tail); + if (defined($description)) { + $description=&unescape($description); + } else { + $description='.'; + } + if (defined($instcodefilter)) { + $instcodefilter=&unescape($instcodefilter); + } else { + $instcodefilter='.'; + } + if (defined($ownerfilter)) { + $ownerfilter=&unescape($ownerfilter); + } else { + $ownerfilter='.'; + } + if (defined($coursefilter)) { + $coursefilter=&unescape($coursefilter); + } else { + $coursefilter='.'; + } + + unless (defined($since)) { $since=0; } + my $qresult=''; + my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT()); + if ($hashref) { + while (my ($key,$value) = each(%$hashref)) { + my ($descr,$lasttime,$inst_code,$owner); + my @courseitems = split(/:/,$value); + $lasttime = pop(@courseitems); + ($descr,$inst_code,$owner)=@courseitems; + if ($lasttime<$since) { next; } + my $match = 1; + unless ($description eq '.') { + my $unescapeDescr = &unescape($descr); + unless (eval('$unescapeDescr=~/\Q$description\E/i')) { + $match = 0; + } + } + unless ($instcodefilter eq '.' || !defined($instcodefilter)) { + my $unescapeInstcode = &unescape($inst_code); + unless (eval('$unescapeInstcode=~/\Q$instcodefilter\E/i')) { + $match = 0; + } + } + unless ($ownerfilter eq '.' || !defined($ownerfilter)) { + my $unescapeOwner = &unescape($owner); + unless (eval('$unescapeOwner=~/\Q$ownerfilter\E/i')) { + $match = 0; + } + } + unless ($coursefilter eq '.' || !defined($coursefilter)) { + my $unescapeCourse = &unescape($key); + unless (eval('$unescapeCourse=~/^$udom(_)\Q$coursefilter\E$/')) { + $match = 0; + } + } + if ($match == 1) { + $qresult.=$key.'='.$descr.':'.$inst_code.':'.$owner.'&'; + } + } + if (&untie_domain_hash($hashref)) { + chop($qresult); + &Reply($client, "$qresult\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting courseiddump\n", $userinput); + } + } else { + &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting courseiddump\n", $userinput); + } + + + return 1; +} +®ister_handler("courseiddump", \&dump_course_id_handler, 0, 1, 0); + +# +# Puts an id to a domains id database. +# +# Parameters: +# $cmd - The command that triggered us. +# $tail - Remainder of the request other than the command. This is a +# colon separated list containing: +# $domain - The domain for which we are writing the id. +# $pairs - The id info to write... this is and & separated list +# of keyword=value. +# $client - Socket open on the client. +# Returns: +# 1 - Continue processing. +# Side effects: +# reply is written to $client. +# +sub put_id_handler { + my ($cmd,$tail,$client) = @_; + + + my $userinput = "$cmd:$tail"; + + my ($udom,$what)=split(/:/,$tail); + chomp($what); + my @pairs=split(/\&/,$what); + my $hashref = &tie_domain_hash($udom, "ids", &GDBM_WRCREAT(), + "P", $what); + if ($hashref) { + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + $hashref->{$key}=$value; + } + if (&untie_domain_hash($hashref)) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting idput\n", $userinput); + } + } else { + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting idput\n", $userinput); + } + + return 1; +} +®ister_handler("idput", \&put_id_handler, 0, 1, 0); + +# +# Retrieves a set of id values from the id database. +# Returns an & separated list of results, one for each requested id to the +# client. +# +# Parameters: +# $cmd - Command keyword that caused us to be dispatched. +# $tail - Tail of the command. Consists of a colon separated: +# domain - the domain whose id table we dump +# ids Consists of an & separated list of +# id keywords whose values will be fetched. +# nonexisting keywords will have an empty value. +# $client - Socket open on the client. +# +# Returns: +# 1 - indicating processing should continue. +# Side effects: +# An & separated list of results is written to $client. +# +sub get_id_handler { + my ($cmd, $tail, $client) = @_; + + + my $userinput = "$client:$tail"; + + my ($udom,$what)=split(/:/,$tail); + chomp($what); + my @queries=split(/\&/,$what); + my $qresult=''; + my $hashref = &tie_domain_hash($udom, "ids", &GDBM_READER()); + if ($hashref) { + for (my $i=0;$i<=$#queries;$i++) { + $qresult.="$hashref->{$queries[$i]}&"; + } + if (&untie_domain_hash($hashref)) { + $qresult=~s/\&$//; + &Reply($client, "$qresult\n", $userinput); + } else { + &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting idget\n",$userinput); + } + } else { + &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting idget\n",$userinput); + } + + return 1; +} +®ister_handler("idget", \&get_id_handler, 0, 1, 0); + +# +# Puts broadcast e-mail sent by Domain Coordinator in nohist_dcmail database +# +# Parameters +# $cmd - Command keyword that caused us to be dispatched. +# $tail - Tail of the command. Consists of a colon separated: +# domain - the domain whose dcmail we are recording +# email Consists of key=value pair +# where key is unique msgid +# and value is message (in XML) +# $client - Socket open on the client. +# +# Returns: +# 1 - indicating processing should continue. +# Side effects +# reply is written to $client. +# +sub put_dcmail_handler { + my ($cmd,$tail,$client) = @_; + my $userinput = "$cmd:$tail"; + + my ($udom,$what)=split(/:/,$tail); + chomp($what); + my $hashref = &tie_domain_hash($udom, "nohist_dcmail", &GDBM_WRCREAT()); + if ($hashref) { + my ($key,$value)=split(/=/,$what); + $hashref->{$key}=$value; + } + if (&untie_domain_hash($hashref)) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting dcmailput\n", $userinput); + } + return 1; +} +®ister_handler("dcmailput", \&put_dcmail_handler, 0, 1, 0); + +# +# Retrieves broadcast e-mail from nohist_dcmail database +# Returns to client an & separated list of key=value pairs, +# where key is msgid and value is message information. +# +# Parameters +# $cmd - Command keyword that caused us to be dispatched. +# $tail - Tail of the command. Consists of a colon separated: +# domain - the domain whose dcmail table we dump +# startfilter - beginning of time window +# endfilter - end of time window +# sendersfilter - & separated list of username:domain +# for senders to search for. +# $client - Socket open on the client. +# +# Returns: +# 1 - indicating processing should continue. +# Side effects +# reply (& separated list of msgid=messageinfo pairs) is +# written to $client. +# +sub dump_dcmail_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + my ($udom,$startfilter,$endfilter,$sendersfilter) = split(/:/,$tail); + chomp($sendersfilter); + my @senders = (); + if (defined($startfilter)) { + $startfilter=&unescape($startfilter); + } else { + $startfilter='.'; + } + if (defined($endfilter)) { + $endfilter=&unescape($endfilter); + } else { + $endfilter='.'; + } + if (defined($sendersfilter)) { + $sendersfilter=&unescape($sendersfilter); + @senders = map { &unescape($_) } split(/\&/,$sendersfilter); + } + + my $qresult=''; + my $hashref = &tie_domain_hash($udom, "nohist_dcmail", &GDBM_WRCREAT()); + if ($hashref) { + while (my ($key,$value) = each(%$hashref)) { + my $match = 1; + my ($timestamp,$subj,$uname,$udom) = + split(/:/,&unescape(&unescape($key)),5); # yes, twice really + $subj = &unescape($subj); + unless ($startfilter eq '.' || !defined($startfilter)) { + if ($timestamp < $startfilter) { + $match = 0; + } + } + unless ($endfilter eq '.' || !defined($endfilter)) { + if ($timestamp > $endfilter) { + $match = 0; + } + } + unless (@senders < 1) { + unless (grep/^$uname:$udom$/,@senders) { + $match = 0; + } + } + if ($match == 1) { + $qresult.=$key.'='.$value.'&'; + } + } + if (&untie_domain_hash($hashref)) { + chop($qresult); + &Reply($client, "$qresult\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting dcmaildump\n", $userinput); + } + } else { + &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting dcmaildump\n", $userinput); + } + return 1; +} + +®ister_handler("dcmaildump", \&dump_dcmail_handler, 0, 1, 0); + +# +# Puts domain roles in nohist_domainroles database +# +# Parameters +# $cmd - Command keyword that caused us to be dispatched. +# $tail - Tail of the command. Consists of a colon separated: +# domain - the domain whose roles we are recording +# role - Consists of key=value pair +# where key is unique role +# and value is start/end date information +# $client - Socket open on the client. +# +# Returns: +# 1 - indicating processing should continue. +# Side effects +# reply is written to $client. +# + +sub put_domainroles_handler { + my ($cmd,$tail,$client) = @_; + + my $userinput = "$cmd:$tail"; + my ($udom,$what)=split(/:/,$tail); + chomp($what); + my @pairs=split(/\&/,$what); + my $hashref = &tie_domain_hash($udom, "nohist_domainroles", &GDBM_WRCREAT()); + if ($hashref) { + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + $hashref->{$key}=$value; + } + if (&untie_domain_hash($hashref)) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting domroleput\n", $userinput); + } + } else { + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting domroleput\n", $userinput); + } + + return 1; +} + +®ister_handler("domroleput", \&put_domainroles_handler, 0, 1, 0); + +# +# Retrieves domain roles from nohist_domainroles database +# Returns to client an & separated list of key=value pairs, +# where key is role and value is start and end date information. +# +# Parameters +# $cmd - Command keyword that caused us to be dispatched. +# $tail - Tail of the command. Consists of a colon separated: +# domain - the domain whose domain roles table we dump +# $client - Socket open on the client. +# +# Returns: +# 1 - indicating processing should continue. +# Side effects +# reply (& separated list of role=start/end info pairs) is +# written to $client. +# +sub dump_domainroles_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + my ($udom,$startfilter,$endfilter,$rolesfilter) = split(/:/,$tail); + chomp($rolesfilter); + my @roles = (); + if (defined($startfilter)) { + $startfilter=&unescape($startfilter); + } else { + $startfilter='.'; + } + if (defined($endfilter)) { + $endfilter=&unescape($endfilter); + } else { + $endfilter='.'; + } + if (defined($rolesfilter)) { + $rolesfilter=&unescape($rolesfilter); + @roles = split(/\&/,$rolesfilter); + } + + my $hashref = &tie_domain_hash($udom, "nohist_domainroles", &GDBM_WRCREAT()); + if ($hashref) { + my $qresult = ''; + while (my ($key,$value) = each(%$hashref)) { + my $match = 1; + my ($start,$end) = split(/:/,&unescape($value)); + my ($trole,$uname,$udom,$runame,$rudom,$rsec) = split(/:/,&unescape($key)); + unless ($startfilter eq '.' || !defined($startfilter)) { + if ($start >= $startfilter) { + $match = 0; + } + } + unless ($endfilter eq '.' || !defined($endfilter)) { + if ($end <= $endfilter) { + $match = 0; + } + } + unless (@roles < 1) { + unless (grep/^$trole$/,@roles) { + $match = 0; + } + } + if ($match == 1) { + $qresult.=$key.'='.$value.'&'; + } + } + if (&untie_domain_hash($hashref)) { + chop($qresult); + &Reply($client, "$qresult\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting domrolesdump\n", $userinput); + } + } else { + &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting domrolesdump\n", $userinput); + } + return 1; +} + +®ister_handler("domrolesdump", \&dump_domainroles_handler, 0, 1, 0); + + +# Process the tmpput command I'm not sure what this does.. Seems to +# create a file in the lonDaemons/tmp directory of the form $id.tmp +# where Id is the client's ip concatenated with a sequence number. +# The file will contain some value that is passed in. Is this e.g. +# a login token? +# +# Parameters: +# $cmd - The command that got us dispatched. +# $tail - The remainder of the request following $cmd: +# In this case this will be the contents of the file. +# $client - Socket connected to the client. +# Returns: +# 1 indicating processing can continue. +# Side effects: +# A file is created in the local filesystem. +# A reply is sent to the client. +sub tmp_put_handler { + my ($cmd, $what, $client) = @_; + + my $userinput = "$cmd:$what"; # Reconstruct for logging. + + + my $store; + $tmpsnum++; + my $id=$$.'_'.$clientip.'_'.$tmpsnum; + $id=~s/\W/\_/g; + $what=~s/\n//g; + my $execdir=$perlvar{'lonDaemons'}; + if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) { + print $store $what; + close $store; + &Reply($client, "$id\n", $userinput); + } else { + &Failure( $client, "error: ".($!+0)."IO::File->new Failed ". + "while attempting tmpput\n", $userinput); + } + return 1; + +} +®ister_handler("tmpput", \&tmp_put_handler, 0, 1, 0); + +# Processes the tmpget command. This command returns the contents +# of a temporary resource file(?) created via tmpput. +# +# Paramters: +# $cmd - Command that got us dispatched. +# $id - Tail of the command, contain the id of the resource +# we want to fetch. +# $client - socket open on the client. +# Return: +# 1 - Inidcating processing can continue. +# Side effects: +# A reply is sent to the client. +# +sub tmp_get_handler { + my ($cmd, $id, $client) = @_; + + my $userinput = "$cmd:$id"; + + + $id=~s/\W/\_/g; + my $store; + my $execdir=$perlvar{'lonDaemons'}; + if ($store=IO::File->new("$execdir/tmp/$id.tmp")) { + my $reply=<$store>; + &Reply( $client, "$reply\n", $userinput); + close $store; + } else { + &Failure( $client, "error: ".($!+0)."IO::File->new Failed ". + "while attempting tmpget\n", $userinput); + } + + return 1; +} +®ister_handler("tmpget", \&tmp_get_handler, 0, 1, 0); + +# +# Process the tmpdel command. This command deletes a temp resource +# created by the tmpput command. +# +# Parameters: +# $cmd - Command that got us here. +# $id - Id of the temporary resource created. +# $client - socket open on the client process. +# +# Returns: +# 1 - Indicating processing should continue. +# Side Effects: +# A file is deleted +# A reply is sent to the client. +sub tmp_del_handler { + my ($cmd, $id, $client) = @_; + + my $userinput= "$cmd:$id"; + + chomp($id); + $id=~s/\W/\_/g; + my $execdir=$perlvar{'lonDaemons'}; + if (unlink("$execdir/tmp/$id.tmp")) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure( $client, "error: ".($!+0)."Unlink tmp Failed ". + "while attempting tmpdel\n", $userinput); + } + + return 1; + +} +®ister_handler("tmpdel", \&tmp_del_handler, 0, 1, 0); + +# +# Processes the setannounce command. This command +# creates a file named announce.txt in the top directory of +# the documentn root and sets its contents. The announce.txt file is +# printed in its entirety at the LonCAPA login page. Note: +# once the announcement.txt fileis created it cannot be deleted. +# However, setting the contents of the file to empty removes the +# announcement from the login page of loncapa so who cares. +# +# Parameters: +# $cmd - The command that got us dispatched. +# $announcement - The text of the announcement. +# $client - Socket open on the client process. +# Retunrns: +# 1 - Indicating request processing should continue +# Side Effects: +# The file {DocRoot}/announcement.txt is created. +# A reply is sent to $client. +# +sub set_announce_handler { + my ($cmd, $announcement, $client) = @_; + + my $userinput = "$cmd:$announcement"; + + chomp($announcement); + $announcement=&unescape($announcement); + if (my $store=IO::File->new('>'.$perlvar{'lonDocRoot'}. + '/announcement.txt')) { + print $store $announcement; + close $store; + &Reply($client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)."\n", $userinput); + } + + return 1; +} +®ister_handler("setannounce", \&set_announce_handler, 0, 1, 0); + +# +# Return the version of the daemon. This can be used to determine +# the compatibility of cross version installations or, alternatively to +# simply know who's out of date and who isn't. Note that the version +# is returned concatenated with the tail. +# Parameters: +# $cmd - the request that dispatched to us. +# $tail - Tail of the request (client's version?). +# $client - Socket open on the client. +#Returns: +# 1 - continue processing requests. +# Side Effects: +# Replies with version to $client. +sub get_version_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = $cmd.$tail; + + &Reply($client, &version($userinput)."\n", $userinput); + + + return 1; +} +®ister_handler("version", \&get_version_handler, 0, 1, 0); + +# Set the current host and domain. This is used to support +# multihomed systems. Each IP of the system, or even separate daemons +# on the same IP can be treated as handling a separate lonCAPA virtual +# machine. This command selects the virtual lonCAPA. The client always +# knows the right one since it is lonc and it is selecting the domain/system +# from the hosts.tab file. +# Parameters: +# $cmd - Command that dispatched us. +# $tail - Tail of the command (domain/host requested). +# $socket - Socket open on the client. +# +# Returns: +# 1 - Indicates the program should continue to process requests. +# Side-effects: +# The default domain/system context is modified for this daemon. +# a reply is sent to the client. +# +sub set_virtual_host_handler { + my ($cmd, $tail, $socket) = @_; + + my $userinput ="$cmd:$tail"; + + &Reply($client, &sethost($userinput)."\n", $userinput); + + + return 1; +} +®ister_handler("sethost", \&set_virtual_host_handler, 0, 1, 0); + +# Process a request to exit: +# - "bye" is sent to the client. +# - The client socket is shutdown and closed. +# - We indicate to the caller that we should exit. +# Formal Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (empty). +# $client - Socket open on the tail. +# Returns: +# 0 - Indicating the program should exit!! +# +sub exit_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + &logthis("Client $clientip ($clientname) hanging up: $userinput"); + &Reply($client, "bye\n", $userinput); + $client->shutdown(2); # shutdown the socket forcibly. + $client->close(); + + return 0; +} +®ister_handler("exit", \&exit_handler, 0,1,1); +®ister_handler("init", \&exit_handler, 0,1,1); +®ister_handler("quit", \&exit_handler, 0,1,1); + +# Determine if auto-enrollment is enabled. +# Note that the original had what I believe to be a defect. +# The original returned 0 if the requestor was not a registerd client. +# It should return "refused". +# Formal Parameters: +# $cmd - The command that invoked us. +# $tail - The tail of the command (Extra command parameters. +# $client - The socket open on the client that issued the request. +# Returns: +# 1 - Indicating processing should continue. +# +sub enrollment_enabled_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = $cmd.":".$tail; # For logging purposes. + + + my $cdom = split(/:/, $tail); # Domain we're asking about. + my $outcome = &localenroll::run($cdom); + &Reply($client, "$outcome\n", $userinput); + + return 1; +} +®ister_handler("autorun", \&enrollment_enabled_handler, 0, 1, 0); + +# Get the official sections for which auto-enrollment is possible. +# Since the admin people won't know about 'unofficial sections' +# we cannot auto-enroll on them. +# Formal Parameters: +# $cmd - The command request that got us dispatched here. +# $tail - The remainder of the request. In our case this +# will be split into: +# $coursecode - The course name from the admin point of view. +# $cdom - The course's domain(?). +# $client - Socket open on the client. +# Returns: +# 1 - Indiciting processing should continue. +# +sub get_sections_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + + my ($coursecode, $cdom) = split(/:/, $tail); + my @secs = &localenroll::get_sections($coursecode,$cdom); + my $seclist = &escape(join(':',@secs)); + + &Reply($client, "$seclist\n", $userinput); + + + return 1; +} +®ister_handler("autogetsections", \&get_sections_handler, 0, 1, 0); + +# Validate the owner of a new course section. +# +# Formal Parameters: +# $cmd - Command that got us dispatched. +# $tail - the remainder of the command. For us this consists of a +# colon separated string containing: +# $inst - Course Id from the institutions point of view. +# $owner - Proposed owner of the course. +# $cdom - Domain of the course (from the institutions +# point of view?).. +# $client - Socket open on the client. +# +# Returns: +# 1 - Processing should continue. +# +sub validate_course_owner_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($inst_course_id, $owner, $cdom) = split(/:/, $tail); + + my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom); + &Reply($client, "$outcome\n", $userinput); + + + + return 1; +} +®ister_handler("autonewcourse", \&validate_course_owner_handler, 0, 1, 0); + +# +# Validate a course section in the official schedule of classes +# from the institutions point of view (part of autoenrollment). +# +# Formal Parameters: +# $cmd - The command request that got us dispatched. +# $tail - The tail of the command. In this case, +# this is a colon separated set of words that will be split +# into: +# $inst_course_id - The course/section id from the +# institutions point of view. +# $cdom - The domain from the institutions +# point of view. +# $client - Socket open on the client. +# Returns: +# 1 - Indicating processing should continue. +# +sub validate_course_section_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($inst_course_id, $cdom) = split(/:/, $tail); + + my $outcome=&localenroll::validate_courseID($inst_course_id,$cdom); + &Reply($client, "$outcome\n", $userinput); + + + return 1; +} +®ister_handler("autovalidatecourse", \&validate_course_section_handler, 0, 1, 0); + +# +# Create a password for a new auto-enrollment user. +# I think/guess, this password allows access to the institutions +# AIS class list server/services. Stuart can correct this comment +# when he finds out how wrong I am. +# +# Formal Parameters: +# $cmd - The command request that got us dispatched. +# $tail - The tail of the command. In this case this is a colon separated +# set of words that will be split into: +# $authparam - An authentication parameter (username??). +# $cdom - The domain of the course from the institution's +# point of view. +# $client - The socket open on the client. +# Returns: +# 1 - continue processing. +# +sub create_auto_enroll_password_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + + my ($authparam, $cdom) = split(/:/, $userinput); + + my ($create_passwd,$authchk); + ($authparam, + $create_passwd, + $authchk) = &localenroll::create_password($authparam,$cdom); + + &Reply($client, &escape($authparam.':'.$create_passwd.':'.$authchk)."\n", + $userinput); + + + return 1; +} +®ister_handler("autocreatepassword", \&create_auto_enroll_password_handler, + 0, 1, 0); + +# Retrieve and remove temporary files created by/during autoenrollment. +# +# Formal Parameters: +# $cmd - The command that got us dispatched. +# $tail - The tail of the command. In our case this is a colon +# separated list that will be split into: +# $filename - The name of the file to remove. +# The filename is given as a path relative to +# the LonCAPA temp file directory. +# $client - Socket open on the client. +# +# Returns: +# 1 - Continue processing. +sub retrieve_auto_file_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "cmd:$tail"; + + my ($filename) = split(/:/, $tail); + + my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename; + if ( (-e $source) && ($filename ne '') ) { + my $reply = ''; + if (open(my $fh,$source)) { + while (<$fh>) { + chomp($_); + $_ =~ s/^\s+//g; + $_ =~ s/\s+$//g; + $reply .= $_; + } + close($fh); + &Reply($client, &escape($reply)."\n", $userinput); + +# Does this have to be uncommented??!? (RF). +# +# unlink($source); + } else { + &Failure($client, "error\n", $userinput); + } + } else { + &Failure($client, "error\n", $userinput); + } + + + return 1; +} +®ister_handler("autoretrieve", \&retrieve_auto_file_handler, 0,1,0); + +# +# Read and retrieve institutional code format (for support form). +# Formal Parameters: +# $cmd - Command that dispatched us. +# $tail - Tail of the command. In this case it conatins +# the course domain and the coursename. +# $client - Socket open on the client. +# Returns: +# 1 - Continue processing. +# +sub get_institutional_code_format_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + + my $reply; + my($cdom,$course) = split(/:/,$tail); + my @pairs = split/\&/,$course; + my %instcodes = (); + my %codes = (); + my @codetitles = (); + my %cat_titles = (); + my %cat_order = (); + foreach (@pairs) { + my ($key,$value) = split/=/,$_; + $instcodes{&unescape($key)} = &unescape($value); + } + my $formatreply = &localenroll::instcode_format($cdom, + \%instcodes, + \%codes, + \@codetitles, + \%cat_titles, + \%cat_order); + if ($formatreply eq 'ok') { + my $codes_str = &hash2str(%codes); + my $codetitles_str = &array2str(@codetitles); + my $cat_titles_str = &hash2str(%cat_titles); + my $cat_order_str = &hash2str(%cat_order); + &Reply($client, + $codes_str.':'.$codetitles_str.':'.$cat_titles_str.':' + .$cat_order_str."\n", + $userinput); + } else { + # this else branch added by RF since if not ok, lonc will + # hang waiting on reply until timeout. + # + &Reply($client, "format_error\n", $userinput); + } + + return 1; +} +®ister_handler("autoinstcodeformat", + \&get_institutional_code_format_handler,0,1,0); + +# Get domain specific conditions for import of student photographs to a course +# +# Retrieves information from photo_permission subroutine in localenroll. +# Returns outcome (ok) if no processing errors, and whether course owner is +# required to accept conditions of use (yes/no). +# +# +sub photo_permission_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my $cdom = $tail; + my ($perm_reqd,$conditions); + my $outcome = &localenroll::photo_permission($cdom,\$perm_reqd, + \$conditions); + &Reply($client, &escape($outcome.':'.$perm_reqd.':'. $conditions)."\n", + $userinput); +} +®ister_handler("autophotopermission",\&photo_permission_handler,0,1,0); + +# +# Checks if student photo is available for a user in the domain, in the user's +# directory (in /userfiles/internal/studentphoto.jpg). +# Uses localstudentphoto:fetch() to ensure there is an up to date copy of +# the student's photo. + +sub photo_check_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($udom,$uname,$pid) = split(/:/,$tail); + $udom = &unescape($udom); + $uname = &unescape($uname); + $pid = &unescape($pid); + my $path=&propath($udom,$uname).'/userfiles/internal/'; + if (!-e $path) { + &mkpath($path); + } + my $response; + my $result = &localstudentphoto::fetch($udom,$uname,$pid,\$response); + $result .= ':'.$response; + &Reply($client, &escape($result)."\n",$userinput); +} +®ister_handler("autophotocheck",\&photo_check_handler,0,1,0); + +# +# Retrieve information from localenroll about whether to provide a button +# for users who have enbled import of student photos to initiate an +# update of photo files for registered students. Also include +# comment to display alongside button. + +sub photo_choice_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my $cdom = &unescape($tail); + my ($update,$comment) = &localenroll::manager_photo_update($cdom); + &Reply($client,&escape($update).':'.&escape($comment)."\n",$userinput); +} +®ister_handler("autophotochoice",\&photo_choice_handler,0,1,0); + +# +# Gets a student's photo to exist (in the correct image type) in the user's +# directory. +# Formal Parameters: +# $cmd - The command request that got us dispatched. +# $tail - A colon separated set of words that will be split into: +# $domain - student's domain +# $uname - student username +# $type - image type desired +# $client - The socket open on the client. +# Returns: +# 1 - continue processing. + +sub student_photo_handler { + my ($cmd, $tail, $client) = @_; + my ($domain,$uname,$ext,$type) = split(/:/, $tail); + + my $path=&propath($domain,$uname). '/userfiles/internal/'; + my $filename = 'studentphoto.'.$ext; + if ($type eq 'thumbnail') { + $filename = 'studentphoto_tn.'.$ext; + } + if (-e $path.$filename) { + &Reply($client,"ok\n","$cmd:$tail"); + return 1; + } + &mkpath($path); + my $file; + if ($type eq 'thumbnail') { + $file=&localstudentphoto::fetch_thumbnail($domain,$uname); + } else { + $file=&localstudentphoto::fetch($domain,$uname); + } + if (!$file) { + &Failure($client,"unavailable\n","$cmd:$tail"); + return 1; + } + if (!-e $path.$filename) { &convert_photo($file,$path.$filename); } + if (-e $path.$filename) { + &Reply($client,"ok\n","$cmd:$tail"); + return 1; + } + &Failure($client,"unable_to_convert\n","$cmd:$tail"); + return 1; +} +®ister_handler("studentphoto", \&student_photo_handler, 0, 1, 0); + +# mkpath makes all directories for a file, expects an absolute path with a +# file or a trailing / if just a dir is passed +# returns 1 on success 0 on failure +sub mkpath { + my ($file)=@_; + my @parts=split(/\//,$file,-1); + my $now=$parts[0].'/'.$parts[1].'/'.$parts[2]; + for (my $i=3;$i<= ($#parts-1);$i++) { + $now.='/'.$parts[$i]; + if (!-e $now) { + if (!mkdir($now,0770)) { return 0; } + } + } + return 1; +} + +#--------------------------------------------------------------- +# +# Getting, decoding and dispatching requests: +# +# +# Get a Request: +# Gets a Request message from the client. The transaction +# is defined as a 'line' of text. We remove the new line +# from the text line. +# +sub get_request { + my $input = <$client>; + chomp($input); + + &Debug("get_request: Request = $input\n"); + + &status('Processing '.$clientname.':'.$input); + + return $input; +} +#--------------------------------------------------------------- +# +# Process a request. This sub should shrink as each action +# gets farmed out into a separat sub that is registered +# with the dispatch hash. +# +# Parameters: +# user_input - The request received from the client (lonc). +# Returns: +# true to keep processing, false if caller should exit. +# +sub process_request { + my ($userinput) = @_; # Easier for now to break style than to + # fix all the userinput -> user_input. + my $wasenc = 0; # True if request was encrypted. +# ------------------------------------------------------------ See if encrypted + if ($userinput =~ /^enc/) { + $userinput = decipher($userinput); + $wasenc=1; + if(!$userinput) { # Cipher not defined. + &Failure($client, "error: Encrypted data without negotated key\n"); + return 0; + } + } + Debug("process_request: $userinput\n"); + + # + # The 'correct way' to add a command to lond is now to + # write a sub to execute it and Add it to the command dispatch + # hash via a call to register_handler.. The comments to that + # sub should give you enough to go on to show how to do this + # along with the examples that are building up as this code + # is getting refactored. Until all branches of the + # if/elseif monster below have been factored out into + # separate procesor subs, if the dispatch hash is missing + # the command keyword, we will fall through to the remainder + # of the if/else chain below in order to keep this thing in + # working order throughout the transmogrification. + + my ($command, $tail) = split(/:/, $userinput, 2); + chomp($command); + chomp($tail); + $tail =~ s/(\r)//; # This helps people debugging with e.g. telnet. + $command =~ s/(\r)//; # And this too for parameterless commands. + if(!$tail) { + $tail =""; # defined but blank. + } + + &Debug("Command received: $command, encoded = $wasenc"); + + if(defined $Dispatcher{$command}) { + + my $dispatch_info = $Dispatcher{$command}; + my $handler = $$dispatch_info[0]; + my $need_encode = $$dispatch_info[1]; + my $client_types = $$dispatch_info[2]; + Debug("Matched dispatch hash: mustencode: $need_encode " + ."ClientType $client_types"); + + # Validate the request: + + my $ok = 1; + my $requesterprivs = 0; + if(&isClient()) { + $requesterprivs |= $CLIENT_OK; + } + if(&isManager()) { + $requesterprivs |= $MANAGER_OK; + } + if($need_encode && (!$wasenc)) { + Debug("Must encode but wasn't: $need_encode $wasenc"); + $ok = 0; + } + if(($client_types & $requesterprivs) == 0) { + Debug("Client not privileged to do this operation"); + $ok = 0; + } + + if($ok) { + Debug("Dispatching to handler $command $tail"); + my $keep_going = &$handler($command, $tail, $client); + return $keep_going; + } else { + Debug("Refusing to dispatch because client did not match requirements"); + Failure($client, "refused\n", $userinput); + return 1; + } + + } + + print $client "unknown_cmd\n"; +# -------------------------------------------------------------------- complete + Debug("process_request - returning 1"); + return 1; +} +# +# Decipher encoded traffic +# Parameters: +# input - Encoded data. +# Returns: +# Decoded data or undef if encryption key was not yet negotiated. +# Implicit input: +# cipher - This global holds the negotiated encryption key. +# +sub decipher { + my ($input) = @_; + my $output = ''; + + + if($cipher) { + my($enc, $enclength, $encinput) = split(/:/, $input); + for(my $encidx = 0; $encidx < length($encinput); $encidx += 16) { + $output .= + $cipher->decrypt(pack("H16", substr($encinput, $encidx, 16))); + } + return substr($output, 0, $enclength); + } else { + return undef; + } +} + +# +# Register a command processor. This function is invoked to register a sub +# to process a request. Once registered, the ProcessRequest sub can automatically +# dispatch requests to an appropriate sub, and do the top level validity checking +# as well: +# - Is the keyword recognized. +# - Is the proper client type attempting the request. +# - Is the request encrypted if it has to be. +# Parameters: +# $request_name - Name of the request being registered. +# This is the command request that will match +# against the hash keywords to lookup the information +# associated with the dispatch information. +# $procedure - Reference to a sub to call to process the request. +# All subs get called as follows: +# Procedure($cmd, $tail, $replyfd, $key) +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $replyfd- File descriptor connected to the client +# $must_encode - True if the request must be encoded to be good. +# $client_ok - True if it's ok for a client to request this. +# $manager_ok - True if it's ok for a manager to request this. +# Side effects: +# - On success, the Dispatcher hash has an entry added for the key $RequestName +# - On failure, the program will die as it's a bad internal bug to try to +# register a duplicate command handler. +# +sub register_handler { + my ($request_name,$procedure,$must_encode, $client_ok,$manager_ok) = @_; + + # Don't allow duplication# + + if (defined $Dispatcher{$request_name}) { + die "Attempting to define a duplicate request handler for $request_name\n"; + } + # Build the client type mask: + + my $client_type_mask = 0; + if($client_ok) { + $client_type_mask |= $CLIENT_OK; + } + if($manager_ok) { + $client_type_mask |= $MANAGER_OK; + } + + # Enter the hash: + + my @entry = ($procedure, $must_encode, $client_type_mask); + + $Dispatcher{$request_name} = \@entry; + +} + + +#------------------------------------------------------------------ + + + + # # Convert an error return code from lcpasswd to a string value. # @@ -749,7 +4700,7 @@ sub catchexception { $SIG{'QUIT'}='DEFAULT'; $SIG{__DIE__}='DEFAULT'; &status("Catching exception"); - &logthis("CRITICAL: " + &logthis("CRITICAL: " ."ABNORMAL EXIT. Child $$ for server $thisserver died through " ."a crash with this error msg->[$error]"); &logthis('Famous last words: '.$status.' - '.$lastlog); @@ -757,14 +4708,14 @@ sub catchexception { $server->close(); die($error); } - sub timeout { &status("Handling Timeout"); - &logthis("CRITICAL: TIME OUT ".$$.""); + &logthis("CRITICAL: TIME OUT ".$$.""); &catchexception('Timeout'); } # -------------------------------- Set signal handlers to record abnormal exits + $SIG{'QUIT'}=\&catchexception; $SIG{__DIE__}=\&catchexception; @@ -822,7 +4773,7 @@ sub REAPER { # ta if (defined($children{$pid})) { &logthis("Child $pid died"); delete($children{$pid}); - } else { + } elsif ($pid > 0) { &logthis("Unknown Child $pid died"); } } while ( $pid > 0 ); @@ -843,7 +4794,7 @@ sub HUNTSMAN { # si &logthis("Free socket: ".shutdown($server,2)); # free up socket my $execdir=$perlvar{'lonDaemons'}; unlink("$execdir/logs/lond.pid"); - &logthis("CRITICAL: Shutting down"); + &logthis("CRITICAL: Shutting down"); &status("Done killing children"); exit; # clean up with dignity } @@ -853,7 +4804,7 @@ sub HUPSMAN { # sig &status("Killing children for restart (HUP)"); kill 'INT' => keys %children; &logthis("Free socket: ".shutdown($server,2)); # free up socket - &logthis("CRITICAL: Restarting"); + &logthis("CRITICAL: Restarting"); my $execdir=$perlvar{'lonDaemons'}; unlink("$execdir/logs/lond.pid"); &status("Restarting self (HUP)"); @@ -863,7 +4814,7 @@ sub HUPSMAN { # sig # # Kill off hashes that describe the host table prior to re-reading it. # Hashes affected are: -# %hostid, %hostdom %hostip +# %hostid, %hostdom %hostip %hostdns. # sub KillHostHashes { foreach my $key (keys %hostid) { @@ -875,6 +4826,9 @@ sub KillHostHashes { foreach my $key (keys %hostip) { delete $hostip{$key}; } + foreach my $key (keys %hostdns) { + delete $hostdns{$key}; + } } # # Read in the host table from file and distribute it into the various hashes: @@ -885,15 +4839,35 @@ sub KillHostHashes { sub ReadHostTable { open (CONFIG,"$perlvar{'lonTabDir'}/hosts.tab") || die "Can't read host file"; - + my $myloncapaname = $perlvar{'lonHostID'}; + Debug("My loncapa name is : $myloncapaname"); + my %name_to_ip; while (my $configline=) { - if (!($configline =~ /^\s*\#/)) { - my ($id,$domain,$role,$name,$ip)=split(/:/,$configline); - chomp($ip); $ip=~s/\D+$//; - $hostid{$ip}=$id; - $hostdom{$id}=$domain; - $hostip{$id}=$ip; - if ($id eq $perlvar{'lonHostID'}) { $thisserver=$name; } + if ($configline !~ /^\s*\#/ && $configline !~ /^\s*$/ ) { + my ($id,$domain,$role,$name)=split(/:/,$configline); + $name=~s/\s//g; + my $ip; + if (!exists($name_to_ip{$name})) { + $ip = gethostbyname($name); + if (!$ip || length($ip) ne 4) { + &logthis("Skipping host $id name $name no IP found\n"); + next; + } + $ip=inet_ntoa($ip); + $name_to_ip{$name} = $ip; + } else { + $ip = $name_to_ip{$name}; + } + $hostid{$ip}=$id; # LonCAPA name of host by IP. + $hostdom{$id}=$domain; # LonCAPA domain name of host. + $hostname{$id}=$name; # LonCAPA name -> DNS name + $hostip{$id}=$ip; # IP address of host. + $hostdns{$name} = $id; # LonCAPA name of host by DNS. + + if ($id eq $perlvar{'lonHostID'}) { + Debug("Found me in the host table: $name"); + $thisserver=$name; + } } } close(CONFIG); @@ -956,14 +4930,16 @@ sub checkchildren { &logthis('Going to check on the children'); my $docdir=$perlvar{'lonDocRoot'}; foreach (sort keys %children) { - sleep 1; + #sleep 1; unless (kill 'USR1' => $_) { &logthis ('Child '.$_.' is dead'); &logstatus($$.' is dead'); + delete($children{$_}); } } sleep 5; - $SIG{ALRM} = sub { die "timeout" }; + $SIG{ALRM} = sub { Debug("timeout"); + die "timeout"; }; $SIG{__DIE__} = 'DEFAULT'; &status("Checking on the children (waiting for reports)"); foreach (sort keys %children) { @@ -977,6 +4953,7 @@ sub checkchildren { #my $result=`echo 'Killed lond process $_.' | mailto $emailto -s '$subj' > /dev/null`; #$execdir=$perlvar{'lonDaemons'}; #$result=`/bin/cp $execdir/logs/lond.log $execdir/logs/lond.log.$_`; + delete($children{$_}); alarm(0); } } @@ -984,6 +4961,7 @@ sub checkchildren { $SIG{ALRM} = 'DEFAULT'; $SIG{__DIE__} = \&catchexception; &status("Finished checking children"); + &logthis('Finished Checking children'); } # --------------------------------------------------------------------- Logging @@ -1015,13 +4993,36 @@ sub Debug { # request - Original request from client. # sub Reply { - my $fd = shift; - my $reply = shift; - my $request = shift; - + my ($fd, $reply, $request) = @_; print $fd $reply; Debug("Request was $request Reply was $reply"); + $Transactions++; +} + + +# +# Sub to report a failure. +# This function: +# - Increments the failure statistic counters. +# - Invokes Reply to send the error message to the client. +# Parameters: +# fd - File descriptor open on the client +# reply - Reply text to emit. +# request - The original request message (used by Reply +# to debug if that's enabled. +# Implicit outputs: +# $Failures- The number of failures is incremented. +# Reply (invoked here) sends a message to the +# client: +# +sub Failure { + my $fd = shift; + my $reply = shift; + my $request = shift; + + $Failures++; + Reply($fd, $reply, $request); # That's simple eh? } # ------------------------------------------------------------------ Log status @@ -1029,16 +5030,19 @@ sub logstatus { &status("Doing logging"); my $docdir=$perlvar{'lonDocRoot'}; { - my $fh=IO::File->new(">>$docdir/lon-status/londstatus.txt"); - print $fh $$."\t".$clientname."\t".$currenthostid."\t".$status."\t".$lastlog."\n"; - $fh->close(); - } - &status("Finished londstatus.txt"); - { my $fh=IO::File->new(">$docdir/lon-status/londchld/$$.txt"); - print $fh $status."\n".$lastlog."\n".time; + print $fh $status."\n".$lastlog."\n".time."\n$keymode"; $fh->close(); } + &status("Finished $$.txt"); + { + open(LOG,">>$docdir/lon-status/londstatus.txt"); + flock(LOG,LOCK_EX); + print LOG $$."\t".$clientname."\t".$currenthostid."\t" + .$status."\t".$lastlog."\t $keymode\n"; + flock(LOG,LOCK_UN); + close(LOG); + } &status("Finished logging"); } @@ -1095,11 +5099,11 @@ sub reconlonc { kill USR1 => $loncpid; } else { &logthis( - "CRITICAL: " + "CRITICAL: " ."lonc at pid $loncpid not responding, giving up"); } } else { - &logthis('CRITICAL: lonc not running, giving up'); + &logthis('CRITICAL: lonc not running, giving up'); } } @@ -1107,12 +5111,12 @@ sub reconlonc { sub subreply { my ($cmd,$server)=@_; - my $peerfile="$perlvar{'lonSockDir'}/$server"; + my $peerfile="$perlvar{'lonSockDir'}/".$hostname{$server}; my $sclient=IO::Socket::UNIX->new(Peer =>"$peerfile", Type => SOCK_STREAM, Timeout => 10) or return "con_lost"; - print $sclient "$cmd\n"; + print $sclient "sethost:$server:$cmd\n"; my $answer=<$sclient>; chomp($answer); if (!$answer) { $answer="con_lost"; } @@ -1128,7 +5132,7 @@ sub reply { $answer=subreply("ping",$server); if ($answer ne $server) { &logthis("sub reply: answer != server answer is $answer, server is $server"); - &reconlonc("$perlvar{'lonSockDir'}/$server"); + &reconlonc("$perlvar{'lonSockDir'}/".$hostname{$server}); } $answer=subreply($cmd,$server); } @@ -1140,14 +5144,14 @@ sub reply { # -------------------------------------------------------------- Talk to lonsql -sub sqlreply { +sub sql_reply { my ($cmd)=@_; - my $answer=subsqlreply($cmd); - if ($answer eq 'con_lost') { $answer=subsqlreply($cmd); } + my $answer=&sub_sql_reply($cmd); + if ($answer eq 'con_lost') { $answer=&sub_sql_reply($cmd); } return $answer; } -sub subsqlreply { +sub sub_sql_reply { my ($cmd)=@_; my $unixsock="mysqlsock"; my $peerfile="$perlvar{'lonSockDir'}/$unixsock"; @@ -1203,7 +5207,7 @@ my $execdir=$perlvar{'lonDaemons'}; open (PIDSAVE,">$execdir/logs/lond.pid"); print PIDSAVE "$$\n"; close(PIDSAVE); -&logthis("CRITICAL: ---------- Starting ----------"); +&logthis("CRITICAL: ---------- Starting ----------"); &status('Starting'); @@ -1221,6 +5225,8 @@ $SIG{USR2} = \&UpdateHosts; ReadHostTable; +my $dist=`$perlvar{'lonDaemons'}/distprobe`; + # -------------------------------------------------------------- # Accept connections. When a connection comes in, it is validated # and if good, a child process is created to process transactions @@ -1236,7 +5242,7 @@ while (1) { sub make_new_child { my $pid; - my $cipher; +# my $cipher; # Now global my $sigset; $client = shift; @@ -1265,9 +5271,10 @@ sub make_new_child { &logthis("Unable to determine who caller was, getpeername returned nothing"); } if (defined($iaddr)) { - $clientip=inet_ntoa($iaddr); + $clientip = inet_ntoa($iaddr); + Debug("Connected with $clientip"); } else { - &logthis("Unable to determine clinetip"); + &logthis("Unable to determine clientip"); $clientip='Unavailable'; } @@ -1292,33 +5299,41 @@ sub make_new_child { sigprocmask(SIG_UNBLOCK, $sigset) or die "Can't unblock SIGINT for fork: $!\n"; - my $tmpsnum=0; +# my $tmpsnum=0; # Now global #---------------------------------------------------- kerberos 5 initialization &Authen::Krb5::init_context(); - &Authen::Krb5::init_ets(); + unless (($dist eq 'fedora4') || ($dist eq 'suse9.3')) { + &Authen::Krb5::init_ets(); + } &status('Accepted connection'); # ============================================================================= # do something with the connection # ----------------------------------------------------------------------------- - # see if we know client and check for spoof IP by challenge + # see if we know client and 'check' for spoof IP by ineffective challenge ReadManagerTable; # May also be a manager!! - my $clientrec=($hostid{$clientip} ne undef); - my $ismanager=($managers{$clientip} ne undef); + my $outsideip=$clientip; + if ($clientip eq '127.0.0.1') { + $outsideip=$hostip{$perlvar{'lonHostID'}}; + } + + my $clientrec=($hostid{$outsideip} ne undef); + my $ismanager=($managers{$outsideip} ne undef); $clientname = "[unknonwn]"; if($clientrec) { # Establish client type. $ConnectionType = "client"; - $clientname = $hostid{$clientip}; + $clientname = $hostid{$outsideip}; if($ismanager) { $ConnectionType = "both"; } } else { $ConnectionType = "manager"; - $clientname = $managers{$clientip}; + $clientname = $managers{$outsideip}; } my $clientok; + if ($clientrec || $ismanager) { &status("Waiting for init from $clientip $clientname"); &logthis('INFO: Connection, '. @@ -1326,34 +5341,94 @@ sub make_new_child { " ($clientname) connection type = $ConnectionType " ); &status("Connecting $clientip ($clientname))"); my $remotereq=<$client>; - $remotereq=~s/[^\w:]//g; + chomp($remotereq); + Debug("Got init: $remotereq"); + my $inikeyword = split(/:/, $remotereq); if ($remotereq =~ /^init/) { &sethost("sethost:$perlvar{'lonHostID'}"); - my $challenge="$$".time; - print $client "$challenge\n"; - &status( - "Waiting for challenge reply from $clientip ($clientname)"); - $remotereq=<$client>; - $remotereq=~s/\W//g; - if ($challenge eq $remotereq) { - $clientok=1; - print $client "ok\n"; + # + # If the remote is attempting a local init... give that a try: + # + my ($i, $inittype) = split(/:/, $remotereq); + + # If the connection type is ssl, but I didn't get my + # certificate files yet, then I'll drop back to + # insecure (if allowed). + + if($inittype eq "ssl") { + my ($ca, $cert) = lonssl::CertificateFile; + my $kfile = lonssl::KeyFile; + if((!$ca) || + (!$cert) || + (!$kfile)) { + $inittype = ""; # This forces insecure attempt. + &logthis(" Certificates not " + ."installed -- trying insecure auth"); + } else { # SSL certificates are in place so + } # Leave the inittype alone. + } + + if($inittype eq "local") { + my $key = LocalConnection($client, $remotereq); + if($key) { + Debug("Got local key $key"); + $clientok = 1; + my $cipherkey = pack("H32", $key); + $cipher = new IDEA($cipherkey); + print $client "ok:local\n"; + &logthis('"); + $keymode = "local" + } else { + Debug("Failed to get local key"); + $clientok = 0; + shutdown($client, 3); + close $client; + } + } elsif ($inittype eq "ssl") { + my $key = SSLConnection($client); + if ($key) { + $clientok = 1; + my $cipherkey = pack("H32", $key); + $cipher = new IDEA($cipherkey); + &logthis('' + ."Successfull ssl authentication with $clientname "); + $keymode = "ssl"; + + } else { + $clientok = 0; + close $client; + } + } else { - &logthis( - "WARNING: $clientip did not reply challenge"); - &status('No challenge reply '.$clientip); + my $ok = InsecureConnection($client); + if($ok) { + $clientok = 1; + &logthis('' + ."Successful insecure authentication with $clientname "); + print $client "ok\n"; + $keymode = "insecure"; + } else { + &logthis('' + ."Attempted insecure connection disallowed "); + close $client; + $clientok = 0; + + } } } else { &logthis( - "WARNING: " + "WARNING: " ."$clientip failed to initialize: >$remotereq< "); &status('No init '.$clientip); } + } else { &logthis( - "WARNING: Unknown client $clientip"); + "WARNING: Unknown client $clientip"); &status('Hung up on '.$clientip); } + if ($clientok) { # ---------------- New known client connecting, could mean machine online again @@ -1363,1490 +5438,33 @@ sub make_new_child { # no need to try to do recon's to myself next; } - &reconlonc("$perlvar{'lonSockDir'}/$id"); + &reconlonc("$perlvar{'lonSockDir'}/".$hostname{$id}); } - &logthis("Established connection: $clientname"); + &logthis("Established connection: $clientname"); &status('Will listen to '.$clientname); # ------------------------------------------------------------ Process requests - while (my $userinput=<$client>) { - chomp($userinput); - Debug("Request = $userinput\n"); - &status('Processing '.$clientname.': '.$userinput); - my $wasenc=0; - alarm(120); -# ------------------------------------------------------------ See if encrypted - if ($userinput =~ /^enc/) { - if ($cipher) { - my ($cmd,$cmdlength,$encinput)=split(/:/,$userinput); - $userinput=''; - for (my $encidx=0;$encidxdecrypt( - pack("H16",substr($encinput,$encidx,16)) - ); - } - $userinput=substr($userinput,0,$cmdlength); - $wasenc=1; - } - } - -# ------------------------------------------------------------- Normal commands -# ------------------------------------------------------------------------ ping - if ($userinput =~ /^ping/) { # client only - if(isClient) { - print $client "$currenthostid\n"; - } else { - Reply($client, "refused\n", $userinput); - } -# ------------------------------------------------------------------------ pong - }elsif ($userinput =~ /^pong/) { # client only - if(isClient) { - my $reply=&reply("ping",$clientname); - print $client "$currenthostid:$reply\n"; - } else { - Reply($client, "refused\n", $userinput); - } -# ------------------------------------------------------------------------ ekey - } elsif ($userinput =~ /^ekey/) { # ok for both clients & mgrs - my $buildkey=time.$$.int(rand 100000); - $buildkey=~tr/1-6/A-F/; - $buildkey=int(rand 100000).$buildkey.int(rand 100000); - my $key=$currenthostid.$clientname; - $key=~tr/a-z/A-Z/; - $key=~tr/G-P/0-9/; - $key=~tr/Q-Z/0-9/; - $key=$key.$buildkey.$key.$buildkey.$key.$buildkey; - $key=substr($key,0,32); - my $cipherkey=pack("H32",$key); - $cipher=new IDEA $cipherkey; - print $client "$buildkey\n"; -# ------------------------------------------------------------------------ load - } elsif ($userinput =~ /^load/) { # client only - if (isClient) { - my $loadavg; - { - my $loadfile=IO::File->new('/proc/loadavg'); - $loadavg=<$loadfile>; - } - $loadavg =~ s/\s.*//g; - my $loadpercent=100*$loadavg/$perlvar{'lonLoadLim'}; - print $client "$loadpercent\n"; - } else { - Reply($client, "refused\n", $userinput); - - } -# -------------------------------------------------------------------- userload - } elsif ($userinput =~ /^userload/) { # client only - if(isClient) { - my $userloadpercent=&userload(); - print $client "$userloadpercent\n"; - } else { - Reply($client, "refused\n", $userinput); - - } -# -# Transactions requiring encryption: -# -# ----------------------------------------------------------------- currentauth - } elsif ($userinput =~ /^currentauth/) { - if (($wasenc==1) && isClient) { # Encoded & client only. - my ($cmd,$udom,$uname)=split(/:/,$userinput); - my $result = GetAuthType($udom, $uname); - if($result eq "nouser") { - print $client "unknown_user\n"; - } - else { - print $client "$result\n" - } - } else { - Reply($client, "refused\n", $userinput); - - } -#--------------------------------------------------------------------- pushfile - } elsif($userinput =~ /^pushfile/) { # encoded & manager. - if(($wasenc == 1) && isManager) { - my $cert = GetCertificate($userinput); - if(ValidManager($cert)) { - my $reply = PushFile($userinput); - print $client "$reply\n"; - } else { - print $client "refused\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -#--------------------------------------------------------------------- reinit - } elsif($userinput =~ /^reinit/) { # Encoded and manager - if (($wasenc == 1) && isManager) { - my $cert = GetCertificate($userinput); - if(ValidManager($cert)) { - chomp($userinput); - my $reply = ReinitProcess($userinput); - print $client "$reply\n"; - } else { - print $client "refused\n"; - } - } else { - Reply($client, "refused\n", $userinput); - } -#------------------------------------------------------------------------- edit - } elsif ($userinput =~ /^edit/) { # encoded and manager: - if(($wasenc ==1) && (isManager)) { - my $cert = GetCertificate($userinput); - if(ValidManager($cert)) { - my($command, $filetype, $script) = split(/:/, $userinput); - if (($filetype eq "hosts") || ($filetype eq "domain")) { - if($script ne "") { - Reply($client, EditFile($userinput)); - } else { - Reply($client,"refused\n",$userinput); - } - } else { - Reply($client,"refused\n",$userinput); - } - } else { - Reply($client,"refused\n",$userinput); - } - } else { - Reply($client,"refused\n",$userinput); - } -# ------------------------------------------------------------------------ auth - } elsif ($userinput =~ /^auth/) { # Encoded and client only. - if (($wasenc==1) && isClient) { - my ($cmd,$udom,$uname,$upass)=split(/:/,$userinput); - chomp($upass); - $upass=unescape($upass); - my $proname=propath($udom,$uname); - my $passfilename="$proname/passwd"; - if (-e $passfilename) { - my $pf = IO::File->new($passfilename); - my $realpasswd=<$pf>; - chomp($realpasswd); - my ($howpwd,$contentpwd)=split(/:/,$realpasswd); - my $pwdcorrect=0; - if ($howpwd eq 'internal') { - &Debug("Internal auth"); - $pwdcorrect= - (crypt($upass,$contentpwd) eq $contentpwd); - } elsif ($howpwd eq 'unix') { - &Debug("Unix auth"); - if((getpwnam($uname))[1] eq "") { #no such user! - $pwdcorrect = 0; - } else { - $contentpwd=(getpwnam($uname))[1]; - my $pwauth_path="/usr/local/sbin/pwauth"; - unless ($contentpwd eq 'x') { - $pwdcorrect= - (crypt($upass,$contentpwd) eq - $contentpwd); - } - - elsif (-e $pwauth_path) { - open PWAUTH, "|$pwauth_path" or - die "Cannot invoke authentication"; - print PWAUTH "$uname\n$upass\n"; - close PWAUTH; - $pwdcorrect=!$?; - } - } - } elsif ($howpwd eq 'krb4') { - my $null=pack("C",0); - unless ($upass=~/$null/) { - my $krb4_error = &Authen::Krb4::get_pw_in_tkt - ($uname,"",$contentpwd,'krbtgt', - $contentpwd,1,$upass); - if (!$krb4_error) { - $pwdcorrect = 1; - } else { - $pwdcorrect=0; - # log error if it is not a bad password - if ($krb4_error != 62) { - &logthis('krb4:'.$uname.','.$contentpwd.','. - &Authen::Krb4::get_err_txt($Authen::Krb4::error)); - } - } - } - } elsif ($howpwd eq 'krb5') { - my $null=pack("C",0); - unless ($upass=~/$null/) { - my $krbclient=&Authen::Krb5::parse_name($uname.'@'.$contentpwd); - my $krbservice="krbtgt/".$contentpwd."\@".$contentpwd; - my $krbserver=&Authen::Krb5::parse_name($krbservice); - my $credentials=&Authen::Krb5::cc_default(); - $credentials->initialize($krbclient); - my $krbreturn = - &Authen::Krb5::get_in_tkt_with_password( - $krbclient,$krbserver,$upass,$credentials); -# unless ($krbreturn) { -# &logthis("Krb5 Error: ". -# &Authen::Krb5::error()); -# } - $pwdcorrect = ($krbreturn == 1); - } else { $pwdcorrect=0; } - } elsif ($howpwd eq 'localauth') { - $pwdcorrect=&localauth::localauth($uname,$upass, - $contentpwd); - } - if ($pwdcorrect) { - print $client "authorized\n"; - } else { - print $client "non_authorized\n"; - } - } else { - print $client "unknown_user\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ---------------------------------------------------------------------- passwd - } elsif ($userinput =~ /^passwd/) { # encoded and client - if (($wasenc==1) && isClient) { - my - ($cmd,$udom,$uname,$upass,$npass)=split(/:/,$userinput); - chomp($npass); - $upass=&unescape($upass); - $npass=&unescape($npass); - &Debug("Trying to change password for $uname"); - my $proname=propath($udom,$uname); - my $passfilename="$proname/passwd"; - if (-e $passfilename) { - my $realpasswd; - { my $pf = IO::File->new($passfilename); - $realpasswd=<$pf>; } - chomp($realpasswd); - my ($howpwd,$contentpwd)=split(/:/,$realpasswd); - if ($howpwd eq 'internal') { - &Debug("internal auth"); - if (crypt($upass,$contentpwd) eq $contentpwd) { - my $salt=time; - $salt=substr($salt,6,2); - my $ncpass=crypt($npass,$salt); - { - my $pf; - if ($pf = IO::File->new(">$passfilename")) { - print $pf "internal:$ncpass\n"; - &logthis("Result of password change for $uname: pwchange_success"); - print $client "ok\n"; - } else { - &logthis("Unable to open $uname passwd to change password"); - print $client "non_authorized\n"; - } - } - - } else { - print $client "non_authorized\n"; - } - } elsif ($howpwd eq 'unix') { - # Unix means we have to access /etc/password - # one way or another. - # First: Make sure the current password is - # correct - &Debug("auth is unix"); - $contentpwd=(getpwnam($uname))[1]; - my $pwdcorrect = "0"; - my $pwauth_path="/usr/local/sbin/pwauth"; - unless ($contentpwd eq 'x') { - $pwdcorrect= - (crypt($upass,$contentpwd) eq $contentpwd); - } elsif (-e $pwauth_path) { - open PWAUTH, "|$pwauth_path" or - die "Cannot invoke authentication"; - print PWAUTH "$uname\n$upass\n"; - close PWAUTH; - &Debug("exited pwauth with $? ($uname,$upass) "); - $pwdcorrect=($? == 0); - } - if ($pwdcorrect) { - my $execdir=$perlvar{'lonDaemons'}; - &Debug("Opening lcpasswd pipeline"); - my $pf = IO::File->new("|$execdir/lcpasswd > $perlvar{'lonDaemons'}/logs/lcpasswd.log"); - print $pf "$uname\n$npass\n$npass\n"; - close $pf; - my $err = $?; - my $result = ($err>0 ? 'pwchange_failure' - : 'ok'); - &logthis("Result of password change for $uname: ". - &lcpasswdstrerror($?)); - print $client "$result\n"; - } else { - print $client "non_authorized\n"; - } - } else { - print $client "auth_mode_error\n"; - } - } else { - print $client "unknown_user\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# -------------------------------------------------------------------- makeuser - } elsif ($userinput =~ /^makeuser/) { # encoded and client. - &Debug("Make user received"); - my $oldumask=umask(0077); - if (($wasenc==1) && isClient) { - my - ($cmd,$udom,$uname,$umode,$npass)=split(/:/,$userinput); - &Debug("cmd =".$cmd." $udom =".$udom. - " uname=".$uname); - chomp($npass); - $npass=&unescape($npass); - my $proname=propath($udom,$uname); - my $passfilename="$proname/passwd"; - &Debug("Password file created will be:". - $passfilename); - if (-e $passfilename) { - print $client "already_exists\n"; - } elsif ($udom ne $currentdomainid) { - print $client "not_right_domain\n"; - } else { - my @fpparts=split(/\//,$proname); - my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2]; - my $fperror=''; - for (my $i=3;$i<=$#fpparts;$i++) { - $fpnow.='/'.$fpparts[$i]; - unless (-e $fpnow) { - unless (mkdir($fpnow,0777)) { - $fperror="error: ".($!+0) - ." mkdir failed while attempting " - ."makeuser"; - } - } - } - unless ($fperror) { - my $result=&make_passwd_file($uname, $umode,$npass, - $passfilename); - print $client $result; - } else { - print $client "$fperror\n"; - } - } - } else { - Reply($client, "refused\n", $userinput); - - } - umask($oldumask); -# -------------------------------------------------------------- changeuserauth - } elsif ($userinput =~ /^changeuserauth/) { # encoded & client - &Debug("Changing authorization"); - if (($wasenc==1) && isClient) { - my - ($cmd,$udom,$uname,$umode,$npass)=split(/:/,$userinput); - chomp($npass); - &Debug("cmd = ".$cmd." domain= ".$udom. - "uname =".$uname." umode= ".$umode); - $npass=&unescape($npass); - my $proname=&propath($udom,$uname); - my $passfilename="$proname/passwd"; - if ($udom ne $currentdomainid) { - print $client "not_right_domain\n"; - } else { - my $result=&make_passwd_file($uname, $umode,$npass, - $passfilename); - print $client $result; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ------------------------------------------------------------------------ home - } elsif ($userinput =~ /^home/) { # client clear or encoded - if(isClient) { - my ($cmd,$udom,$uname)=split(/:/,$userinput); - chomp($uname); - my $proname=propath($udom,$uname); - if (-e $proname) { - print $client "found\n"; - } else { - print $client "not_found\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ---------------------------------------------------------------------- update - } elsif ($userinput =~ /^update/) { # client clear or encoded. - if(isClient) { - my ($cmd,$fname)=split(/:/,$userinput); - my $ownership=ishome($fname); - if ($ownership eq 'not_owner') { - if (-e $fname) { - my ($dev,$ino,$mode,$nlink, - $uid,$gid,$rdev,$size, - $atime,$mtime,$ctime, - $blksize,$blocks)=stat($fname); - my $now=time; - my $since=$now-$atime; - if ($since>$perlvar{'lonExpire'}) { - my $reply= - &reply("unsub:$fname","$clientname"); - unlink("$fname"); - } else { - my $transname="$fname.in.transfer"; - my $remoteurl= - &reply("sub:$fname","$clientname"); - my $response; - { - my $ua=new LWP::UserAgent; - my $request=new HTTP::Request('GET',"$remoteurl"); - $response=$ua->request($request,$transname); - } - if ($response->is_error()) { - unlink($transname); - my $message=$response->status_line; - &logthis( - "LWP GET: $message for $fname ($remoteurl)"); - } else { - if ($remoteurl!~/\.meta$/) { - my $ua=new LWP::UserAgent; - my $mrequest= - new HTTP::Request('GET',$remoteurl.'.meta'); - my $mresponse= - $ua->request($mrequest,$fname.'.meta'); - if ($mresponse->is_error()) { - unlink($fname.'.meta'); - } - } - rename($transname,$fname); - } - } - print $client "ok\n"; - } else { - print $client "not_found\n"; - } - } else { - print $client "rejected\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# -------------------------------------- fetch a user file from a remote server - } elsif ($userinput =~ /^fetchuserfile/) { # Client clear or enc. - if(isClient) { - my ($cmd,$fname)=split(/:/,$userinput); - my ($udom,$uname,$ufile)=split(/\//,$fname); - my $udir=propath($udom,$uname).'/userfiles'; - unless (-e $udir) { mkdir($udir,0770); } - if (-e $udir) { - $ufile=~s/^[\.\~]+//; - $ufile=~s/\///g; - my $destname=$udir.'/'.$ufile; - my $transname=$udir.'/'.$ufile.'.in.transit'; - my $remoteurl='http://'.$clientip.'/userfiles/'.$fname; - my $response; - { - my $ua=new LWP::UserAgent; - my $request=new HTTP::Request('GET',"$remoteurl"); - $response=$ua->request($request,$transname); - } - if ($response->is_error()) { - unlink($transname); - my $message=$response->status_line; - &logthis("LWP GET: $message for $fname ($remoteurl)"); - print $client "failed\n"; - } else { - if (!rename($transname,$destname)) { - &logthis("Unable to move $transname to $destname"); - unlink($transname); - print $client "failed\n"; - } else { - print $client "ok\n"; - } - } - } else { - print $client "not_home\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ------------------------------------------ authenticate access to a user file - } elsif ($userinput =~ /^tokenauthuserfile/) { # Client only - if(isClient) { - my ($cmd,$fname,$session)=split(/:/,$userinput); - chomp($session); - my $reply='non_auth'; - if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'. - $session.'.id')) { - while (my $line=) { - if ($line=~/userfile\.$fname\=/) { $reply='ok'; } - } - close(ENVIN); - print $client $reply."\n"; - } else { - print $client "invalid_token\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ----------------------------------------------------------------- unsubscribe - } elsif ($userinput =~ /^unsub/) { - if(isClient) { - my ($cmd,$fname)=split(/:/,$userinput); - if (-e $fname) { - print $client &unsub($client,$fname,$clientip); - } else { - print $client "not_found\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ------------------------------------------------------------------- subscribe - } elsif ($userinput =~ /^sub/) { - if(isClient) { - print $client &subscribe($userinput,$clientip); - } else { - Reply($client, "refused\n", $userinput); - - } -# ------------------------------------------------------------- current version - } elsif ($userinput =~ /^currentversion/) { - if(isClient) { - my ($cmd,$fname)=split(/:/,$userinput); - print $client ¤tversion($fname)."\n"; - } else { - Reply($client, "refused\n", $userinput); - - } -# ------------------------------------------------------------------------- log - } elsif ($userinput =~ /^log/) { - if(isClient) { - my ($cmd,$udom,$uname,$what)=split(/:/,$userinput); - chomp($what); - my $proname=propath($udom,$uname); - my $now=time; - { - my $hfh; - if ($hfh=IO::File->new(">>$proname/activity.log")) { - print $hfh "$now:$clientname:$what\n"; - print $client "ok\n"; - } else { - print $client "error: ".($!+0) - ." IO::File->new Failed " - ."while attempting log\n"; - } - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ------------------------------------------------------------------------- put - } elsif ($userinput =~ /^put/) { - if(isClient) { - my ($cmd,$udom,$uname,$namespace,$what) - =split(/:/,$userinput); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - if ($namespace ne 'roles') { - chomp($what); - my $proname=propath($udom,$uname); - my $now=time; - unless ($namespace=~/^nohist\_/) { - my $hfh; - if ( - $hfh=IO::File->new(">>$proname/$namespace.hist") - ) { print $hfh "P:$now:$what\n"; } - } - my @pairs=split(/\&/,$what); - my %hash; - if (tie(%hash,'GDBM_File', - "$proname/$namespace.db", - &GDBM_WRCREAT(),0640)) { - foreach my $pair (@pairs) { - my ($key,$value)=split(/=/,$pair); - $hash{$key}=$value; - } - if (untie(%hash)) { - print $client "ok\n"; - } else { - print $client "error: ".($!+0) - ." untie(GDBM) failed ". - "while attempting put\n"; - } - } else { - print $client "error: ".($!) - ." tie(GDBM) Failed ". - "while attempting put\n"; - } - } else { - print $client "refused\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ------------------------------------------------------------------- inc - } elsif ($userinput =~ /^inc:/) { - if(isClient) { - my ($cmd,$udom,$uname,$namespace,$what) - =split(/:/,$userinput); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - if ($namespace ne 'roles') { - chomp($what); - my $proname=propath($udom,$uname); - my $now=time; - unless ($namespace=~/^nohist\_/) { - my $hfh; - if ( - $hfh=IO::File->new(">>$proname/$namespace.hist") - ) { print $hfh "P:$now:$what\n"; } - } - my @pairs=split(/\&/,$what); - my %hash; - if (tie(%hash,'GDBM_File', - "$proname/$namespace.db", - &GDBM_WRCREAT(),0640)) { - foreach my $pair (@pairs) { - my ($key,$value)=split(/=/,$pair); - # We could check that we have a number... - if (! defined($value) || $value eq '') { - $value = 1; - } - $hash{$key}+=$value; - } - if (untie(%hash)) { - print $client "ok\n"; - } else { - print $client "error: ".($!+0) - ." untie(GDBM) failed ". - "while attempting put\n"; - } - } else { - print $client "error: ".($!) - ." tie(GDBM) Failed ". - "while attempting put\n"; - } - } else { - print $client "refused\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# -------------------------------------------------------------------- rolesput - } elsif ($userinput =~ /^rolesput/) { - if(isClient) { - &Debug("rolesput"); - if ($wasenc==1) { - my ($cmd,$exedom,$exeuser,$udom,$uname,$what) - =split(/:/,$userinput); - &Debug("cmd = ".$cmd." exedom= ".$exedom. - "user = ".$exeuser." udom=".$udom. - "what = ".$what); - my $namespace='roles'; - chomp($what); - my $proname=propath($udom,$uname); - my $now=time; - { - my $hfh; - if ( - $hfh=IO::File->new(">>$proname/$namespace.hist") - ) { - print $hfh "P:$now:$exedom:$exeuser:$what\n"; - } - } - my @pairs=split(/\&/,$what); - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) { - foreach my $pair (@pairs) { - my ($key,$value)=split(/=/,$pair); - &ManagePermissions($key, $udom, $uname, - &GetAuthType( $udom, - $uname)); - $hash{$key}=$value; - } - if (untie(%hash)) { - print $client "ok\n"; - } else { - print $client "error: ".($!+0) - ." untie(GDBM) Failed ". - "while attempting rolesput\n"; - } - } else { - print $client "error: ".($!+0) - ." tie(GDBM) Failed ". - "while attempting rolesput\n"; - } - } else { - print $client "refused\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# -------------------------------------------------------------------- rolesdel - } elsif ($userinput =~ /^rolesdel/) { - if(isClient) { - &Debug("rolesdel"); - if ($wasenc==1) { - my ($cmd,$exedom,$exeuser,$udom,$uname,$what) - =split(/:/,$userinput); - &Debug("cmd = ".$cmd." exedom= ".$exedom. - "user = ".$exeuser." udom=".$udom. - "what = ".$what); - my $namespace='roles'; - chomp($what); - my $proname=propath($udom,$uname); - my $now=time; - { - my $hfh; - if ( - $hfh=IO::File->new(">>$proname/$namespace.hist") - ) { - print $hfh "D:$now:$exedom:$exeuser:$what\n"; - } - } - my @rolekeys=split(/\&/,$what); - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) { - foreach my $key (@rolekeys) { - delete $hash{$key}; - } - if (untie(%hash)) { - print $client "ok\n"; - } else { - print $client "error: ".($!+0) - ." untie(GDBM) Failed ". - "while attempting rolesdel\n"; - } - } else { - print $client "error: ".($!+0) - ." tie(GDBM) Failed ". - "while attempting rolesdel\n"; - } - } else { - print $client "refused\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ------------------------------------------------------------------------- get - } elsif ($userinput =~ /^get/) { - if(isClient) { - my ($cmd,$udom,$uname,$namespace,$what) - =split(/:/,$userinput); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - chomp($what); - my @queries=split(/\&/,$what); - my $proname=propath($udom,$uname); - my $qresult=''; - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { - for (my $i=0;$i<=$#queries;$i++) { - $qresult.="$hash{$queries[$i]}&"; - } - if (untie(%hash)) { - $qresult=~s/\&$//; - print $client "$qresult\n"; - } else { - print $client "error: ".($!+0) - ." untie(GDBM) Failed ". - "while attempting get\n"; - } - } else { - if ($!+0 == 2) { - print $client "error:No such file or ". - "GDBM reported bad block error\n"; - } else { - print $client "error: ".($!+0) - ." tie(GDBM) Failed ". - "while attempting get\n"; - } - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ------------------------------------------------------------------------ eget - } elsif ($userinput =~ /^eget/) { - if (isClient) { - my ($cmd,$udom,$uname,$namespace,$what) - =split(/:/,$userinput); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - chomp($what); - my @queries=split(/\&/,$what); - my $proname=propath($udom,$uname); - my $qresult=''; - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { - for (my $i=0;$i<=$#queries;$i++) { - $qresult.="$hash{$queries[$i]}&"; - } - if (untie(%hash)) { - $qresult=~s/\&$//; - if ($cipher) { - my $cmdlength=length($qresult); - $qresult.=" "; - my $encqresult=''; - for - (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) { - $encqresult.= - unpack("H16", - $cipher->encrypt(substr($qresult,$encidx,8))); - } - print $client "enc:$cmdlength:$encqresult\n"; - } else { - print $client "error:no_key\n"; - } - } else { - print $client "error: ".($!+0) - ." untie(GDBM) Failed ". - "while attempting eget\n"; - } - } else { - print $client "error: ".($!+0) - ." tie(GDBM) Failed ". - "while attempting eget\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ------------------------------------------------------------------------- del - } elsif ($userinput =~ /^del/) { - if(isClient) { - my ($cmd,$udom,$uname,$namespace,$what) - =split(/:/,$userinput); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - chomp($what); - my $proname=propath($udom,$uname); - my $now=time; - unless ($namespace=~/^nohist\_/) { - my $hfh; - if ( - $hfh=IO::File->new(">>$proname/$namespace.hist") - ) { print $hfh "D:$now:$what\n"; } - } - my @keys=split(/\&/,$what); - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) { - foreach my $key (@keys) { - delete($hash{$key}); - } - if (untie(%hash)) { - print $client "ok\n"; - } else { - print $client "error: ".($!+0) - ." untie(GDBM) Failed ". - "while attempting del\n"; - } - } else { - print $client "error: ".($!+0) - ." tie(GDBM) Failed ". - "while attempting del\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ------------------------------------------------------------------------ keys - } elsif ($userinput =~ /^keys/) { - if(isClient) { - my ($cmd,$udom,$uname,$namespace) - =split(/:/,$userinput); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - my $proname=propath($udom,$uname); - my $qresult=''; - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { - foreach my $key (keys %hash) { - $qresult.="$key&"; - } - if (untie(%hash)) { - $qresult=~s/\&$//; - print $client "$qresult\n"; - } else { - print $client "error: ".($!+0) - ." untie(GDBM) Failed ". - "while attempting keys\n"; - } - } else { - print $client "error: ".($!+0) - ." tie(GDBM) Failed ". - "while attempting keys\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ----------------------------------------------------------------- dumpcurrent - } elsif ($userinput =~ /^currentdump/) { - if (isClient) { - my ($cmd,$udom,$uname,$namespace) - =split(/:/,$userinput); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - my $qresult=''; - my $proname=propath($udom,$uname); - my %hash; - if (tie(%hash,'GDBM_File', - "$proname/$namespace.db", - &GDBM_READER(),0640)) { - # Structure of %data: - # $data{$symb}->{$parameter}=$value; - # $data{$symb}->{'v.'.$parameter}=$version; - # since $parameter will be unescaped, we do not - # have to worry about silly parameter names... - my %data = (); - while (my ($key,$value) = each(%hash)) { - my ($v,$symb,$param) = split(/:/,$key); - next if ($v eq 'version' || $symb eq 'keys'); - next if (exists($data{$symb}) && - exists($data{$symb}->{$param}) && - $data{$symb}->{'v.'.$param} > $v); - $data{$symb}->{$param}=$value; - $data{$symb}->{'v.'.$param}=$v; - } - if (untie(%hash)) { - while (my ($symb,$param_hash) = each(%data)) { - while(my ($param,$value) = each (%$param_hash)){ - next if ($param =~ /^v\./); - $qresult.=$symb.':'.$param.'='.$value.'&'; - } - } - chop($qresult); - print $client "$qresult\n"; - } else { - print $client "error: ".($!+0) - ." untie(GDBM) Failed ". - "while attempting currentdump\n"; - } - } else { - print $client "error: ".($!+0) - ." tie(GDBM) Failed ". - "while attempting currentdump\n"; - } - } else { - Reply($client, "refused\n", $userinput); - } -# ------------------------------------------------------------------------ dump - } elsif ($userinput =~ /^dump/) { - if(isClient) { - my ($cmd,$udom,$uname,$namespace,$regexp) - =split(/:/,$userinput); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - if (defined($regexp)) { - $regexp=&unescape($regexp); - } else { - $regexp='.'; - } - my $qresult=''; - my $proname=propath($udom,$uname); - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { - while (my ($key,$value) = each(%hash)) { - if ($regexp eq '.') { - $qresult.=$key.'='.$value.'&'; - } else { - my $unescapeKey = &unescape($key); - if (eval('$unescapeKey=~/$regexp/')) { - $qresult.="$key=$value&"; - } - } - } - if (untie(%hash)) { - chop($qresult); - print $client "$qresult\n"; - } else { - print $client "error: ".($!+0) - ." untie(GDBM) Failed ". - "while attempting dump\n"; - } - } else { - print $client "error: ".($!+0) - ." tie(GDBM) Failed ". - "while attempting dump\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ----------------------------------------------------------------------- store - } elsif ($userinput =~ /^store/) { - if(isClient) { - my ($cmd,$udom,$uname,$namespace,$rid,$what) - =split(/:/,$userinput); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - if ($namespace ne 'roles') { - chomp($what); - my $proname=propath($udom,$uname); - my $now=time; - unless ($namespace=~/^nohist\_/) { - my $hfh; - if ( - $hfh=IO::File->new(">>$proname/$namespace.hist") - ) { print $hfh "P:$now:$rid:$what\n"; } - } - my @pairs=split(/\&/,$what); - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) { - my @previouskeys=split(/&/,$hash{"keys:$rid"}); - my $key; - $hash{"version:$rid"}++; - my $version=$hash{"version:$rid"}; - my $allkeys=''; - foreach my $pair (@pairs) { - my ($key,$value)=split(/=/,$pair); - $allkeys.=$key.':'; - $hash{"$version:$rid:$key"}=$value; - } - $hash{"$version:$rid:timestamp"}=$now; - $allkeys.='timestamp'; - $hash{"$version:keys:$rid"}=$allkeys; - if (untie(%hash)) { - print $client "ok\n"; - } else { - print $client "error: ".($!+0) - ." untie(GDBM) Failed ". - "while attempting store\n"; - } - } else { - print $client "error: ".($!+0) - ." tie(GDBM) Failed ". - "while attempting store\n"; - } - } else { - print $client "refused\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# --------------------------------------------------------------------- restore - } elsif ($userinput =~ /^restore/) { - if(isClient) { - my ($cmd,$udom,$uname,$namespace,$rid) - =split(/:/,$userinput); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - chomp($rid); - my $proname=propath($udom,$uname); - my $qresult=''; - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { - my $version=$hash{"version:$rid"}; - $qresult.="version=$version&"; - my $scope; - for ($scope=1;$scope<=$version;$scope++) { - my $vkeys=$hash{"$scope:keys:$rid"}; - my @keys=split(/:/,$vkeys); - my $key; - $qresult.="$scope:keys=$vkeys&"; - foreach $key (@keys) { - $qresult.="$scope:$key=".$hash{"$scope:$rid:$key"}."&"; - } - } - if (untie(%hash)) { - $qresult=~s/\&$//; - print $client "$qresult\n"; - } else { - print $client "error: ".($!+0) - ." untie(GDBM) Failed ". - "while attempting restore\n"; - } - } else { - print $client "error: ".($!+0) - ." tie(GDBM) Failed ". - "while attempting restore\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# -------------------------------------------------------------------- chatsend - } elsif ($userinput =~ /^chatsend/) { - if(isClient) { - my ($cmd,$cdom,$cnum,$newpost)=split(/\:/,$userinput); - &chatadd($cdom,$cnum,$newpost); - print $client "ok\n"; - } else { - Reply($client, "refused\n", $userinput); - - } -# -------------------------------------------------------------------- chatretr - } elsif ($userinput =~ /^chatretr/) { - if(isClient) { - my - ($cmd,$cdom,$cnum,$udom,$uname)=split(/\:/,$userinput); - my $reply=''; - foreach (&getchat($cdom,$cnum,$udom,$uname)) { - $reply.=&escape($_).':'; - } - $reply=~s/\:$//; - print $client $reply."\n"; - } else { - Reply($client, "refused\n", $userinput); - - } -# ------------------------------------------------------------------- querysend - } elsif ($userinput =~ /^querysend/) { - if(isClient) { - my ($cmd,$query, - $arg1,$arg2,$arg3)=split(/\:/,$userinput); - $query=~s/\n*$//g; - print $client "". - sqlreply("$clientname\&$query". - "\&$arg1"."\&$arg2"."\&$arg3")."\n"; - } else { - Reply($client, "refused\n", $userinput); - - } -# ------------------------------------------------------------------ queryreply - } elsif ($userinput =~ /^queryreply/) { - if(isClient) { - my ($cmd,$id,$reply)=split(/:/,$userinput); - my $store; - my $execdir=$perlvar{'lonDaemons'}; - if ($store=IO::File->new(">$execdir/tmp/$id")) { - $reply=~s/\&/\n/g; - print $store $reply; - close $store; - my $store2=IO::File->new(">$execdir/tmp/$id.end"); - print $store2 "done\n"; - close $store2; - print $client "ok\n"; - } - else { - print $client "error: ".($!+0) - ." IO::File->new Failed ". - "while attempting queryreply\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ----------------------------------------------------------------- courseidput - } elsif ($userinput =~ /^courseidput/) { - if(isClient) { - my ($cmd,$udom,$what)=split(/:/,$userinput); - chomp($what); - $udom=~s/\W//g; - my $proname= - "$perlvar{'lonUsersDir'}/$udom/nohist_courseids"; - my $now=time; - my @pairs=split(/\&/,$what); - my %hash; - if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) { - foreach my $pair (@pairs) { - my ($key,$value)=split(/=/,$pair); - $hash{$key}=$value.':'.$now; - } - if (untie(%hash)) { - print $client "ok\n"; - } else { - print $client "error: ".($!+0) - ." untie(GDBM) Failed ". - "while attempting courseidput\n"; - } - } else { - print $client "error: ".($!+0) - ." tie(GDBM) Failed ". - "while attempting courseidput\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ---------------------------------------------------------------- courseiddump - } elsif ($userinput =~ /^courseiddump/) { - if(isClient) { - my ($cmd,$udom,$since,$description) - =split(/:/,$userinput); - if (defined($description)) { - $description=&unescape($description); - } else { - $description='.'; - } - unless (defined($since)) { $since=0; } - my $qresult=''; - my $proname= - "$perlvar{'lonUsersDir'}/$udom/nohist_courseids"; - my %hash; - if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) { - while (my ($key,$value) = each(%hash)) { - my ($descr,$lasttime)=split(/\:/,$value); - if ($lasttime<$since) { next; } - if ($description eq '.') { - $qresult.=$key.'='.$descr.'&'; - } else { - my $unescapeVal = &unescape($descr); - if (eval('$unescapeVal=~/$description/i')) { - $qresult.="$key=$descr&"; - } - } - } - if (untie(%hash)) { - chop($qresult); - print $client "$qresult\n"; - } else { - print $client "error: ".($!+0) - ." untie(GDBM) Failed ". - "while attempting courseiddump\n"; - } - } else { - print $client "error: ".($!+0) - ." tie(GDBM) Failed ". - "while attempting courseiddump\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ----------------------------------------------------------------------- idput - } elsif ($userinput =~ /^idput/) { - if(isClient) { - my ($cmd,$udom,$what)=split(/:/,$userinput); - chomp($what); - $udom=~s/\W//g; - my $proname="$perlvar{'lonUsersDir'}/$udom/ids"; - my $now=time; - { - my $hfh; - if ( - $hfh=IO::File->new(">>$proname.hist") - ) { print $hfh "P:$now:$what\n"; } - } - my @pairs=split(/\&/,$what); - my %hash; - if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) { - foreach my $pair (@pairs) { - my ($key,$value)=split(/=/,$pair); - $hash{$key}=$value; - } - if (untie(%hash)) { - print $client "ok\n"; - } else { - print $client "error: ".($!+0) - ." untie(GDBM) Failed ". - "while attempting idput\n"; - } - } else { - print $client "error: ".($!+0) - ." tie(GDBM) Failed ". - "while attempting idput\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ----------------------------------------------------------------------- idget - } elsif ($userinput =~ /^idget/) { - if(isClient) { - my ($cmd,$udom,$what)=split(/:/,$userinput); - chomp($what); - $udom=~s/\W//g; - my $proname="$perlvar{'lonUsersDir'}/$udom/ids"; - my @queries=split(/\&/,$what); - my $qresult=''; - my %hash; - if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) { - for (my $i=0;$i<=$#queries;$i++) { - $qresult.="$hash{$queries[$i]}&"; - } - if (untie(%hash)) { - $qresult=~s/\&$//; - print $client "$qresult\n"; - } else { - print $client "error: ".($!+0) - ." untie(GDBM) Failed ". - "while attempting idget\n"; - } - } else { - print $client "error: ".($!+0) - ." tie(GDBM) Failed ". - "while attempting idget\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ---------------------------------------------------------------------- tmpput - } elsif ($userinput =~ /^tmpput/) { - if(isClient) { - my ($cmd,$what)=split(/:/,$userinput); - my $store; - $tmpsnum++; - my $id=$$.'_'.$clientip.'_'.$tmpsnum; - $id=~s/\W/\_/g; - $what=~s/\n//g; - my $execdir=$perlvar{'lonDaemons'}; - if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) { - print $store $what; - close $store; - print $client "$id\n"; - } - else { - print $client "error: ".($!+0) - ."IO::File->new Failed ". - "while attempting tmpput\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } - -# ---------------------------------------------------------------------- tmpget - } elsif ($userinput =~ /^tmpget/) { - if(isClient) { - my ($cmd,$id)=split(/:/,$userinput); - chomp($id); - $id=~s/\W/\_/g; - my $store; - my $execdir=$perlvar{'lonDaemons'}; - if ($store=IO::File->new("$execdir/tmp/$id.tmp")) { - my $reply=<$store>; - print $client "$reply\n"; - close $store; - } - else { - print $client "error: ".($!+0) - ."IO::File->new Failed ". - "while attempting tmpget\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ---------------------------------------------------------------------- tmpdel - } elsif ($userinput =~ /^tmpdel/) { - if(isClient) { - my ($cmd,$id)=split(/:/,$userinput); - chomp($id); - $id=~s/\W/\_/g; - my $execdir=$perlvar{'lonDaemons'}; - if (unlink("$execdir/tmp/$id.tmp")) { - print $client "ok\n"; - } else { - print $client "error: ".($!+0) - ."Unlink tmp Failed ". - "while attempting tmpdel\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# -------------------------------------------------------------------------- ls - } elsif ($userinput =~ /^ls/) { - if(isClient) { - my $obs; - my $rights; - my ($cmd,$ulsdir)=split(/:/,$userinput); - my $ulsout=''; - my $ulsfn; - if (-e $ulsdir) { - if(-d $ulsdir) { - if (opendir(LSDIR,$ulsdir)) { - while ($ulsfn=readdir(LSDIR)) { - undef $obs, $rights; - my @ulsstats=stat($ulsdir.'/'.$ulsfn); - #We do some obsolete checking here - if(-e $ulsdir.'/'.$ulsfn.".meta") { - open(FILE, $ulsdir.'/'.$ulsfn.".meta"); - my @obsolete=; - foreach my $obsolete (@obsolete) { - if($obsolete =~ m|()(on)|) { $obs = 1; } - if($obsolete =~ m|()(default)|) { $rights = 1; } - } - } - $ulsout.=$ulsfn.'&'.join('&',@ulsstats); - if($obs eq '1') { $ulsout.="&1"; } - else { $ulsout.="&0"; } - if($rights eq '1') { $ulsout.="&1:"; } - else { $ulsout.="&0:"; } - } - closedir(LSDIR); - } - } else { - my @ulsstats=stat($ulsdir); - $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':'; - } - } else { - $ulsout='no_such_dir'; - } - if ($ulsout eq '') { $ulsout='empty'; } - print $client "$ulsout\n"; - } else { - Reply($client, "refused\n", $userinput); - - } -# ----------------------------------------------------------------- setannounce - } elsif ($userinput =~ /^setannounce/) { - if (isClient) { - my ($cmd,$announcement)=split(/:/,$userinput); - chomp($announcement); - $announcement=&unescape($announcement); - if (my $store=IO::File->new('>'.$perlvar{'lonDocRoot'}. - '/announcement.txt')) { - print $store $announcement; - close $store; - print $client "ok\n"; - } else { - print $client "error: ".($!+0)."\n"; - } - } else { - Reply($client, "refused\n", $userinput); - - } -# ------------------------------------------------------------------ Hanging up - } elsif (($userinput =~ /^exit/) || - ($userinput =~ /^init/)) { # no restrictions. - &logthis( - "Client $clientip ($clientname) hanging up: $userinput"); - print $client "bye\n"; - $client->shutdown(2); # shutdown the socket forcibly. - $client->close(); - last; - -# ---------------------------------- set current host/domain - } elsif ($userinput =~ /^sethost:/) { - if (isClient) { - print $client &sethost($userinput)."\n"; - } else { - print $client "refused\n"; - } -#---------------------------------- request file (?) version. - } elsif ($userinput =~/^version:/) { - if (isClient) { - print $client &version($userinput)."\n"; - } else { - print $client "refused\n"; - } -# ------------------------------------------------------------- unknown command - - } else { - # unknown command - print $client "unknown_cmd\n"; - } -# -------------------------------------------------------------------- complete + my $keep_going = 1; + my $user_input; + while(($user_input = get_request) && $keep_going) { + alarm(120); + Debug("Main: Got $user_input\n"); + $keep_going = &process_request($user_input); alarm(0); - &status('Listening to '.$clientname); + &status('Listening to '.$clientname." ($keymode)"); } + # --------------------------------------------- client unknown or fishy, refuse - } else { + } else { print $client "refused\n"; $client->close(); - &logthis("WARNING: " + &logthis("WARNING: " ."Rejected client $clientip, closing connection"); } - } + } # ============================================================================= - &logthis("CRITICAL: " + &logthis("CRITICAL: " ."Disconnect from $clientip ($clientname)"); @@ -2856,8 +5474,35 @@ sub make_new_child { exit; } +# +# Determine if a user is an author for the indicated domain. +# +# Parameters: +# domain - domain to check in . +# user - Name of user to check. +# +# Return: +# 1 - User is an author for domain. +# 0 - User is not an author for domain. +sub is_author { + my ($domain, $user) = @_; + + &Debug("is_author: $user @ $domain"); + + my $hashref = &tie_user_hash($domain, $user, "roles", + &GDBM_READER()); + # Author role should show up as a key /domain/_au + + my $key = "/$domain/_au"; + my $value = $hashref->{$key}; + + if(defined($value)) { + &Debug("$user @ $domain is an author"); + } + return defined($value); +} # # Checks to see if the input roleput request was to set # an author role. If so, invokes the lchtmldir script to set @@ -2869,32 +5514,98 @@ sub make_new_child { # user - Name of the user for which the role is being put. # authtype - The authentication type associated with the user. # -sub ManagePermissions -{ - my $request = shift; - my $domain = shift; - my $user = shift; - my $authtype= shift; +sub manage_permissions { + my ($request, $domain, $user, $authtype) = @_; + + &Debug("manage_permissions: $request $domain $user $authtype"); # See if the request is of the form /$domain/_au - if($request =~ /^(\/$domain\/_au)$/) { # It's an author rolesput... + if($request =~ /^(\/\Q$domain\E\/_au)$/) { # It's an author rolesput... my $execdir = $perlvar{'lonDaemons'}; my $userhome= "/home/$user" ; &logthis("system $execdir/lchtmldir $userhome $user $authtype"); + &Debug("Setting homedir permissions for $userhome"); system("$execdir/lchtmldir $userhome $user $authtype"); } } + + +# +# Return the full path of a user password file, whether it exists or not. +# Parameters: +# domain - Domain in which the password file lives. +# user - name of the user. +# Returns: +# Full passwd path: +# +sub password_path { + my ($domain, $user) = @_; + return &propath($domain, $user).'/passwd'; +} + +# Password Filename +# Returns the path to a passwd file given domain and user... only if +# it exists. +# Parameters: +# domain - Domain in which to search. +# user - username. +# Returns: +# - If the password file exists returns its path. +# - If the password file does not exist, returns undefined. +# +sub password_filename { + my ($domain, $user) = @_; + + Debug ("PasswordFilename called: dom = $domain user = $user"); + + my $path = &password_path($domain, $user); + Debug("PasswordFilename got path: $path"); + if(-e $path) { + return $path; + } else { + return undef; + } +} + +# +# Rewrite the contents of the user's passwd file. +# Parameters: +# domain - domain of the user. +# name - User's name. +# contents - New contents of the file. +# Returns: +# 0 - Failed. +# 1 - Success. +# +sub rewrite_password_file { + my ($domain, $user, $contents) = @_; + + my $file = &password_filename($domain, $user); + if (defined $file) { + my $pf = IO::File->new(">$file"); + if($pf) { + print $pf "$contents\n"; + return 1; + } else { + return 0; + } + } else { + return 0; + } + +} + # -# GetAuthType - Determines the authorization type of a user in a domain. +# get_auth_type - Determines the authorization type of a user in a domain. # Returns the authorization type or nouser if there is no such user. # -sub GetAuthType +sub get_auth_type { - my $domain = shift; - my $user = shift; - Debug("GetAuthType( $domain, $user ) \n"); + my ($domain, $user) = @_; + + Debug("get_auth_type( $domain, $user ) \n"); my $proname = &propath($domain, $user); my $passwdfile = "$proname/passwd"; if( -e $passwdfile ) { @@ -2904,19 +5615,138 @@ sub GetAuthType Debug("Password info = $realpassword\n"); my ($authtype, $contentpwd) = split(/:/, $realpassword); Debug("Authtype = $authtype, content = $contentpwd\n"); - my $availinfo = ''; - if($authtype eq 'krb4' or $authtype eq 'krb5') { - $availinfo = $contentpwd; - } - - return "$authtype:$availinfo"; - } - else { + return "$authtype:$contentpwd"; + } else { Debug("Returning nouser"); return "nouser"; } } +# +# Validate a user given their domain, name and password. This utility +# function is used by both AuthenticateHandler and ChangePasswordHandler +# to validate the login credentials of a user. +# Parameters: +# $domain - The domain being logged into (this is required due to +# the capability for multihomed systems. +# $user - The name of the user being validated. +# $password - The user's propoposed password. +# +# Returns: +# 1 - The domain,user,pasword triplet corresponds to a valid +# user. +# 0 - The domain,user,password triplet is not a valid user. +# +sub validate_user { + my ($domain, $user, $password) = @_; + + + # Why negative ~pi you may well ask? Well this function is about + # authentication, and therefore very important to get right. + # I've initialized the flag that determines whether or not I've + # validated correctly to a value it's not supposed to get. + # At the end of this function. I'll ensure that it's not still that + # value so we don't just wind up returning some accidental value + # as a result of executing an unforseen code path that + # did not set $validated. At the end of valid execution paths, + # validated shoule be 1 for success or 0 for failuer. + + my $validated = -3.14159; + + # How we authenticate is determined by the type of authentication + # the user has been assigned. If the authentication type is + # "nouser", the user does not exist so we will return 0. + + my $contents = &get_auth_type($domain, $user); + my ($howpwd, $contentpwd) = split(/:/, $contents); + + my $null = pack("C",0); # Used by kerberos auth types. + + if ($howpwd ne 'nouser') { + + if($howpwd eq "internal") { # Encrypted is in local password file. + $validated = (crypt($password, $contentpwd) eq $contentpwd); + } + elsif ($howpwd eq "unix") { # User is a normal unix user. + $contentpwd = (getpwnam($user))[1]; + if($contentpwd) { + if($contentpwd eq 'x') { # Shadow password file... + my $pwauth_path = "/usr/local/sbin/pwauth"; + open PWAUTH, "|$pwauth_path" or + die "Cannot invoke authentication"; + print PWAUTH "$user\n$password\n"; + close PWAUTH; + $validated = ! $?; + + } else { # Passwords in /etc/passwd. + $validated = (crypt($password, + $contentpwd) eq $contentpwd); + } + } else { + $validated = 0; + } + } + elsif ($howpwd eq "krb4") { # user is in kerberos 4 auth. domain. + if(! ($password =~ /$null/) ) { + my $k4error = &Authen::Krb4::get_pw_in_tkt($user, + "", + $contentpwd,, + 'krbtgt', + $contentpwd, + 1, + $password); + if(!$k4error) { + $validated = 1; + } else { + $validated = 0; + &logthis('krb4: '.$user.', '.$contentpwd.', '. + &Authen::Krb4::get_err_txt($Authen::Krb4::error)); + } + } else { + $validated = 0; # Password has a match with null. + } + } elsif ($howpwd eq "krb5") { # User is in kerberos 5 auth. domain. + if(!($password =~ /$null/)) { # Null password not allowed. + my $krbclient = &Authen::Krb5::parse_name($user.'@' + .$contentpwd); + my $krbservice = "krbtgt/".$contentpwd."\@".$contentpwd; + my $krbserver = &Authen::Krb5::parse_name($krbservice); + my $credentials= &Authen::Krb5::cc_default(); + $credentials->initialize($krbclient); + my $krbreturn = &Authen::Krb5::get_in_tkt_with_password($krbclient, + $krbserver, + $password, + $credentials); + $validated = ($krbreturn == 1); + } else { + $validated = 0; + } + } elsif ($howpwd eq "localauth") { + # Authenticate via installation specific authentcation method: + $validated = &localauth::localauth($user, + $password, + $contentpwd); + } else { # Unrecognized auth is also bad. + $validated = 0; + } + } else { + $validated = 0; + } + # + # $validated has the correct stat of the authentication: + # + + unless ($validated != -3.14159) { + # I >really really< want to know if this happens. + # since it indicates that user authentication is badly + # broken in some code path. + # + die "ValidateUser - failed to set the value of validated $domain, $user $password"; + } + return $validated; +} + + sub addline { my ($fname,$hostid,$ip,$newline)=@_; my $contents; @@ -2937,40 +5767,40 @@ sub addline { return $found; } -sub getchat { +sub get_chat { my ($cdom,$cname,$udom,$uname)=@_; - my %hash; - my $proname=&propath($cdom,$cname); + my @entries=(); - if (tie(%hash,'GDBM_File',"$proname/nohist_chatroom.db", - &GDBM_READER(),0640)) { - @entries=map { $_.':'.$hash{$_} } sort keys %hash; - untie %hash; + my $hashref = &tie_user_hash($cdom, $cname, 'nohist_chatroom', + &GDBM_READER()); + if ($hashref) { + @entries=map { $_.':'.$hashref->{$_} } sort(keys(%$hashref)); + &untie_user_hash($hashref); } my @participants=(); my $cutoff=time-60; - if (tie(%hash,'GDBM_File',"$proname/nohist_inchatroom.db", - &GDBM_WRCREAT(),0640)) { - $hash{$uname.':'.$udom}=time; - foreach (sort keys %hash) { - if ($hash{$_}>$cutoff) { - $participants[$#participants+1]='active_participant:'.$_; + $hashref = &tie_user_hash($cdom, $cname, 'nohist_inchatroom', + &GDBM_WRCREAT()); + if ($hashref) { + $hashref->{$uname.':'.$udom}=time; + foreach my $user (sort(keys(%$hashref))) { + if ($hashref->{$user}>$cutoff) { + push(@participants, 'active_participant:'.$user); } } - untie %hash; + &untie_user_hash($hashref); } return (@participants,@entries); } -sub chatadd { +sub chat_add { my ($cdom,$cname,$newchat)=@_; - my %hash; - my $proname=&propath($cdom,$cname); my @entries=(); my $time=time; - if (tie(%hash,'GDBM_File',"$proname/nohist_chatroom.db", - &GDBM_WRCREAT(),0640)) { - @entries=map { $_.':'.$hash{$_} } sort keys %hash; + my $hashref = &tie_user_hash($cdom, $cname, 'nohist_chatroom', + &GDBM_WRCREAT()); + if ($hashref) { + @entries=map { $_.':'.$hashref->{$_} } sort(keys(%$hashref)); my ($lastid)=($entries[$#entries]=~/^(\w+)\:/); my ($thentime,$idnum)=split(/\_/,$lastid); my $newid=$time.'_000000'; @@ -2980,38 +5810,58 @@ sub chatadd { $idnum=substr('000000'.$idnum,-6,6); $newid=$time.'_'.$idnum; } - $hash{$newid}=$newchat; + $hashref->{$newid}=$newchat; my $expired=$time-3600; - foreach (keys %hash) { - my ($thistime)=($_=~/(\d+)\_/); + foreach my $comment (keys(%$hashref)) { + my ($thistime) = ($comment=~/(\d+)\_/); if ($thistime<$expired) { - delete $hash{$_}; + delete $hashref->{$comment}; } } - untie %hash; - } - { - my $hfh; - if ($hfh=IO::File->new(">>$proname/chatroom.log")) { - print $hfh "$time:".&unescape($newchat)."\n"; + { + my $proname=&propath($cdom,$cname); + if (open(CHATLOG,">>$proname/chatroom.log")) { + print CHATLOG ("$time:".&unescape($newchat)."\n"); + } + close(CHATLOG); } + &untie_user_hash($hashref); } } sub unsub { my ($fname,$clientip)=@_; my $result; + my $unsubs = 0; # Number of successful unsubscribes: + + + # An old way subscriptions were handled was to have a + # subscription marker file: + + Debug("Attempting unlink of $fname.$clientname"); if (unlink("$fname.$clientname")) { - $result="ok\n"; - } else { - $result="not_subscribed\n"; - } + $unsubs++; # Successful unsub via marker file. + } + + # The more modern way to do it is to have a subscription list + # file: + if (-e "$fname.subscription") { my $found=&addline($fname,$clientname,$clientip,''); - if ($found) { $result="ok\n"; } + if ($found) { + $unsubs++; + } + } + + # If either or both of these mechanisms succeeded in unsubscribing a + # resource we can return ok: + + if($unsubs) { + $result = "ok\n"; } else { - if ($result != "ok\n") { $result="not_subscribed\n"; } + $result = "not_subscribed\n"; } + return $result; } @@ -3064,7 +5914,7 @@ sub thisversion { sub subscribe { my ($userinput,$clientip)=@_; my $result; - my ($cmd,$fname)=split(/:/,$userinput); + my ($cmd,$fname)=split(/:/,$userinput,2); my $ownership=&ishome($fname); if ($ownership eq 'owner') { # explitly asking for the current version? @@ -3108,6 +5958,35 @@ sub subscribe { } return $result; } +# Change the passwd of a unix user. The caller must have +# first verified that the user is a loncapa user. +# +# Parameters: +# user - Unix user name to change. +# pass - New password for the user. +# Returns: +# ok - if success +# other - Some meaningfule error message string. +# NOTE: +# invokes a setuid script to change the passwd. +sub change_unix_password { + my ($user, $pass) = @_; + + &Debug("change_unix_password"); + my $execdir=$perlvar{'lonDaemons'}; + &Debug("Opening lcpasswd pipeline"); + my $pf = IO::File->new("|$execdir/lcpasswd > " + ."$perlvar{'lonDaemons'}" + ."/logs/lcpasswd.log"); + print $pf "$user\n$pass\n$pass\n"; + close $pf; + my $err = $?; + return ($err < @passwderrors) ? $passwderrors[$err] : + "pwchange_falure - unknown error"; + + +} + sub make_passwd_file { my ($uname, $umode,$npass,$passfilename)=@_; @@ -3115,7 +5994,11 @@ sub make_passwd_file { if ($umode eq 'krb4' or $umode eq 'krb5') { { my $pf = IO::File->new(">$passfilename"); - print $pf "$umode:$npass\n"; + if ($pf) { + print $pf "$umode:$npass\n"; + } else { + $result = "pass_file_failed_error"; + } } } elsif ($umode eq 'internal') { my $salt=time; @@ -3124,16 +6007,36 @@ sub make_passwd_file { { &Debug("Creating internal auth"); my $pf = IO::File->new(">$passfilename"); - print $pf "internal:$ncpass\n"; + if($pf) { + print $pf "internal:$ncpass\n"; + } else { + $result = "pass_file_failed_error"; + } } } elsif ($umode eq 'localauth') { { my $pf = IO::File->new(">$passfilename"); - print $pf "localauth:$npass\n"; + if($pf) { + print $pf "localauth:$npass\n"; + } else { + $result = "pass_file_failed_error"; + } } } elsif ($umode eq 'unix') { { - my $execpath="$perlvar{'lonDaemons'}/"."lcuseradd"; + # + # Don't allow the creation of privileged accounts!!! that would + # be real bad!!! + # + my $uid = getpwnam($uname); + if((defined $uid) && ($uid == 0)) { + &logthis(">>>Attempted to create privilged account blocked"); + return "no_priv_account_error\n"; + } + + my $execpath ="$perlvar{'lonDaemons'}/"."lcuseradd"; + + my $lc_error_file = $execdir."/tmp/lcuseradd".$$.".status"; { &Debug("Executing external: ".$execpath); &Debug("user = ".$uname.", Password =". $npass); @@ -3141,18 +6044,42 @@ sub make_passwd_file { print $se "$uname\n"; print $se "$npass\n"; print $se "$npass\n"; + print $se "$lc_error_file\n"; # Status -> unique file. } - my $useraddok = $?; - if($useraddok > 0) { - &logthis("Failed lcuseradd: ".&lcuseraddstrerror($useraddok)); + if (-r $lc_error_file) { + &Debug("Opening error file: $lc_error_file"); + my $error = IO::File->new("< $lc_error_file"); + my $useraddok = <$error>; + $error->close; + unlink($lc_error_file); + + chomp $useraddok; + + if($useraddok > 0) { + my $error_text = &lcuseraddstrerror($useraddok); + &logthis("Failed lcuseradd: $error_text"); + $result = "lcuseradd_failed:$error_text\n"; + } else { + my $pf = IO::File->new(">$passfilename"); + if($pf) { + print $pf "unix:\n"; + } else { + $result = "pass_file_failed_error"; + } + } + } else { + &Debug("Could not locate lcuseradd error: $lc_error_file"); + $result="bug_lcuseradd_no_output_file"; } - my $pf = IO::File->new(">$passfilename"); - print $pf "unix:\n"; } } elsif ($umode eq 'none') { { - my $pf = IO::File->new(">$passfilename"); - print $pf "none:\n"; + my $pf = IO::File->new("> $passfilename"); + if($pf) { + print $pf "none:\n"; + } else { + $result = "pass_file_failed_error"; + } } } else { $result="auth_mode_error\n"; @@ -3160,12 +6087,17 @@ sub make_passwd_file { return $result; } +sub convert_photo { + my ($start,$dest)=@_; + system("convert $start $dest"); +} + sub sethost { my ($remotereq) = @_; my (undef,$hostid)=split(/:/,$remotereq); if (!defined($hostid)) { $hostid=$perlvar{'lonHostID'}; } if ($hostip{$perlvar{'lonHostID'}} eq $hostip{$hostid}) { - $currenthostid=$hostid; + $currenthostid =$hostid; $currentdomainid=$hostdom{$hostid}; &logthis("Setting hostid to $hostid, and domain to $currentdomainid"); } else { @@ -3205,6 +6137,74 @@ sub userload { return $userloadpercent; } +# Routines for serializing arrays and hashes (copies from lonnet) + +sub array2str { + my (@array) = @_; + my $result=&arrayref2str(\@array); + $result=~s/^__ARRAY_REF__//; + $result=~s/__END_ARRAY_REF__$//; + return $result; +} + +sub arrayref2str { + my ($arrayref) = @_; + my $result='__ARRAY_REF__'; + foreach my $elem (@$arrayref) { + if(ref($elem) eq 'ARRAY') { + $result.=&arrayref2str($elem).'&'; + } elsif(ref($elem) eq 'HASH') { + $result.=&hashref2str($elem).'&'; + } elsif(ref($elem)) { + #print("Got a ref of ".(ref($elem))." skipping."); + } else { + $result.=&escape($elem).'&'; + } + } + $result=~s/\&$//; + $result .= '__END_ARRAY_REF__'; + return $result; +} + +sub hash2str { + my (%hash) = @_; + my $result=&hashref2str(\%hash); + $result=~s/^__HASH_REF__//; + $result=~s/__END_HASH_REF__$//; + return $result; +} + +sub hashref2str { + my ($hashref)=@_; + my $result='__HASH_REF__'; + foreach (sort(keys(%$hashref))) { + if (ref($_) eq 'ARRAY') { + $result.=&arrayref2str($_).'='; + } elsif (ref($_) eq 'HASH') { + $result.=&hashref2str($_).'='; + } elsif (ref($_)) { + $result.='='; + #print("Got a ref of ".(ref($_))." skipping."); + } else { + if ($_) {$result.=&escape($_).'=';} else { last; } + } + + if(ref($hashref->{$_}) eq 'ARRAY') { + $result.=&arrayref2str($hashref->{$_}).'&'; + } elsif(ref($hashref->{$_}) eq 'HASH') { + $result.=&hashref2str($hashref->{$_}).'&'; + } elsif(ref($hashref->{$_})) { + $result.='&'; + #print("Got a ref of ".(ref($hashref->{$_}))." skipping."); + } else { + $result.=&escape($hashref->{$_}).'&'; + } + } + $result=~s/\&$//; + $result .= '__END_HASH_REF__'; + return $result; +} + # ----------------------------------- POD (plain old documentation, CPAN style) =head1 NAME @@ -3412,7 +6412,7 @@ Place in B stores hash in namespace -=item rolesput +=item rolesputy put a role into a user's environment