Diff for /loncom/lond between versions 1.217 and 1.223

version 1.217, 2004/07/28 21:33:22 version 1.223, 2004/08/05 11:37:05
Line 50  use File::Copy; Line 50  use File::Copy;
 use LONCAPA::ConfigFileEdit;  use LONCAPA::ConfigFileEdit;
 use LONCAPA::lonlocal;  use LONCAPA::lonlocal;
 use LONCAPA::lonssl;  use LONCAPA::lonssl;
   use Fcntl qw(:flock);
   
 my $DEBUG = 0;       # Non zero to enable debug log entries.  my $DEBUG = 1;       # Non zero to enable debug log entries.
   
 my $status='';  my $status='';
 my $lastlog='';  my $lastlog='';
Line 121  my @passwderrors = ("ok", Line 122  my @passwderrors = ("ok",
    "lcpasswd Cannot set new passwd.",     "lcpasswd Cannot set new passwd.",
    "lcpasswd Username has invalid characters",     "lcpasswd Username has invalid characters",
    "lcpasswd Invalid characters in password",     "lcpasswd Invalid characters in password",
     "11", "12",     "lcpasswd User already exists", 
     "lcpasswd Password mismatch");                     "lcpasswd Something went wrong with user addition.",
       "lcpasswd Password mismatch",
       "lcpasswd Error filename is invalid");
   
   
 #  The array below are lcuseradd error strings.:  #  The array below are lcuseradd error strings.:
Line 1204  sub user_load_handler { Line 1207  sub user_load_handler {
 }  }
 register_handler("userload", \&user_load_handler, 0, 1, 0);  register_handler("userload", \&user_load_handler, 0, 1, 0);
   
   #   Process a request for the authorization type of a user:
   #   (userauth).
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $replyfd- File descriptor connected to the client
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit
   # Implicit outputs:
   #    The user authorization type is written to the client.
   #
   sub user_authorization_type {
       my ($cmd, $tail, $replyfd) = @_;
      
       my $userinput = "$cmd:$tail";
      
       #  Pull the domain and username out of the command tail.
       # and call get_auth_type to determine the authentication type.
      
       my ($udom,$uname)=split(/:/,$tail);
       my $result = &get_auth_type($udom, $uname);
       if($result eq "nouser") {
    &Failure( $replyfd, "unknown_user\n", $userinput);
       } else {
    #
    # We only want to pass the second field from get_auth_type
    # for ^krb.. otherwise we'll be handing out the encrypted
    # password for internals e.g.
    #
    my ($type,$otherinfo) = split(/:/,$result);
    if($type =~ /^krb/) {
       $type = $result;
    }
    &Reply( $replyfd, "$type:\n", $userinput);
       }
     
       return 1;
   }
   &register_handler("currentauth", \&user_authorization_type, 1, 1, 0);
   
   #   Process a request by a manager to push a hosts or domain table 
   #   to us.  We pick apart the command and pass it on to the subs
   #   that already exist to do this.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $client - File descriptor connected to the client
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit
   # Implicit Output:
   #    a reply is written to the client.
   
   sub push_file_handler {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = "$cmd:$tail";
   
       # At this time we only know that the IP of our partner is a valid manager
       # the code below is a hook to do further authentication (e.g. to resolve
       # spoofing).
   
       my $cert = &GetCertificate($userinput);
       if(&ValidManager($cert)) { 
   
    # Now presumably we have the bona fides of both the peer host and the
    # process making the request.
         
    my $reply = &PushFile($userinput);
    &Reply($client, "$reply\n", $userinput);
   
       } else {
    &Failure( $client, "refused\n", $userinput);
       } 
       return 1;
   }
   &register_handler("pushfile", \&push_file_handler, 1, 0, 1);
   
   
   
   #   Process a reinit request.  Reinit requests that either
   #   lonc or lond be reinitialized so that an updated 
   #   host.tab or domain.tab can be processed.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $client - File descriptor connected to the client
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit
   #  Implicit output:
   #     a reply is sent to the client.
   #
   sub reinit_process_handler {
       my ($cmd, $tail, $client) = @_;
      
       my $userinput = "$cmd:$tail";
      
       my $cert = &GetCertificate($userinput);
       if(&ValidManager($cert)) {
    chomp($userinput);
    my $reply = &ReinitProcess($userinput);
    &Reply( $client,  "$reply\n", $userinput);
       } else {
    &Failure( $client, "refused\n", $userinput);
       }
       return 1;
   }
   
   &register_handler("reinit", \&reinit_process_handler, 1, 0, 1);
   
   #  Process the editing script for a table edit operation.
   #  the editing operation must be encrypted and requested by
   #  a manager host.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $client - File descriptor connected to the client
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit
   #  Implicit output:
   #     a reply is sent to the client.
   #
   sub edit_table_handler {
       my ($command, $tail, $client) = @_;
      
       my $userinput = "$command:$tail";
   
       my $cert = &GetCertificate($userinput);
       if(&ValidManager($cert)) {
    my($filetype, $script) = split(/:/, $tail);
    if (($filetype eq "hosts") || 
       ($filetype eq "domain")) {
       if($script ne "") {
    &Reply($client,              # BUGBUG - EditFile
         &EditFile($userinput), #   could fail.
         $userinput);
       } else {
    &Failure($client,"refused\n",$userinput);
       }
    } else {
       &Failure($client,"refused\n",$userinput);
    }
       } else {
    &Failure($client,"refused\n",$userinput);
       }
       return 1;
   }
   register_handler("edit", \&edit_table_handler, 1, 0, 1);
   
   
   #
   #   Authenticate a user against the LonCAPA authentication
   #   database.  Note that there are several authentication
   #   possibilities:
   #   - unix     - The user can be authenticated against the unix
   #                password file.
   #   - internal - The user can be authenticated against a purely 
   #                internal per user password file.
   #   - kerberos - The user can be authenticated against either a kerb4 or kerb5
   #                ticket granting authority.
   #   - user     - The person tailoring LonCAPA can supply a user authentication
   #                mechanism that is per system.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   #
   sub authenticate_handler {
       my ($cmd, $tail, $client) = @_;
   
       
       #  Regenerate the full input line 
       
       my $userinput  = $cmd.":".$tail;
       
       #  udom    - User's domain.
       #  uname   - Username.
       #  upass   - User's password.
       
       my ($udom,$uname,$upass)=split(/:/,$tail);
       &Debug(" Authenticate domain = $udom, user = $uname, password = $upass");
       chomp($upass);
       $upass=&unescape($upass);
   
       my $pwdcorrect = &validate_user($udom, $uname, $upass);
       if($pwdcorrect) {
    &Reply( $client, "authorized\n", $userinput);
    #
    #  Bad credentials: Failed to authorize
    #
       } else {
    &Failure( $client, "non_authorized\n", $userinput);
       }
   
       return 1;
   }
   
   register_handler("auth", \&authenticate_handler, 1, 1, 0);
   
   #
   #   Change a user's password.  Note that this function is complicated by
   #   the fact that a user may be authenticated in more than one way:
   #   At present, we are not able to change the password for all types of
   #   authentication methods.  Only for:
   #      unix    - unix password or shadow passoword style authentication.
   #      local   - Locally written authentication mechanism.
   #   For now, kerb4 and kerb5 password changes are not supported and result
   #   in an error.
   # FUTURE WORK:
   #    Support kerberos passwd changes?
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   sub change_password_handler {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = $cmd.":".$tail;           # Reconstruct client's string.
   
       #
       #  udom  - user's domain.
       #  uname - Username.
       #  upass - Current password.
       #  npass - New password.
      
       my ($udom,$uname,$upass,$npass)=split(/:/,$tail);
   
       $upass=&unescape($upass);
       $npass=&unescape($npass);
       &Debug("Trying to change password for $uname");
   
       # First require that the user can be authenticated with their
       # old password:
   
       my $validated = &validate_user($udom, $uname, $upass);
       if($validated) {
    my $realpasswd  = &get_auth_type($udom, $uname); # Defined since authd.
   
    my ($howpwd,$contentpwd)=split(/:/,$realpasswd);
    if ($howpwd eq 'internal') {
       &Debug("internal auth");
       my $salt=time;
       $salt=substr($salt,6,2);
       my $ncpass=crypt($npass,$salt);
       if(&rewrite_password_file($udom, $uname, "internal:$ncpass")) {
    &logthis("Result of password change for "
    ."$uname: pwchange_success");
    &Reply($client, "ok\n", $userinput);
       } else {
    &logthis("Unable to open $uname passwd "               
    ."to change password");
    &Failure( $client, "non_authorized\n",$userinput);
       }
    } elsif ($howpwd eq 'unix') {
       # Unix means we have to access /etc/password
       &Debug("auth is unix");
       my $execdir=$perlvar{'lonDaemons'};
       &Debug("Opening lcpasswd pipeline");
       my $pf = IO::File->new("|$execdir/lcpasswd > "
      ."$perlvar{'lonDaemons'}"
      ."/logs/lcpasswd.log");
       print $pf "$uname\n$npass\n$npass\n";
       close $pf;
       my $err = $?;
       my $result = ($err>0 ? 'pwchange_failure' : 'ok');
       &logthis("Result of password change for $uname: ".
        &lcpasswdstrerror($?));
       &Reply($client, "$result\n", $userinput);
    } else {
       # this just means that the current password mode is not
       # one we know how to change (e.g the kerberos auth modes or
       # locally written auth handler).
       #
       &Failure( $client, "auth_mode_error\n", $userinput);
    }  
   
       }
       else {
    &Failure( $client, "non_authorized\n", $userinput);
       }
   
       return 1;
   }
   register_handler("passwd", \&change_password_handler, 1, 1, 0);
   
   
 #---------------------------------------------------------------  #---------------------------------------------------------------
 #  #
Line 1318  sub process_request { Line 1626  sub process_request {
   
 #------------------- Commands not yet in spearate handlers. --------------  #------------------- Commands not yet in spearate handlers. --------------
   
 # ----------------------------------------------------------------- currentauth  
     if ($userinput =~ /^currentauth/) {  
  if (($wasenc==1)  && isClient) { # Encoded & client only.  
     my ($cmd,$udom,$uname)=split(/:/,$userinput);  
     my $result = GetAuthType($udom, $uname);  
     if($result eq "nouser") {  
  print $client "unknown_user\n";  
     }  
     else {  
  print $client "$result\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 #--------------------------------------------------------------------- pushfile  
     } elsif($userinput =~ /^pushfile/) { # encoded & manager.  
  if(($wasenc == 1) && isManager) {  
     my $cert = GetCertificate($userinput);  
     if(ValidManager($cert)) {  
  my $reply = PushFile($userinput);  
  print $client "$reply\n";  
     } else {  
  print $client "refused\n";  
     }   
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 #--------------------------------------------------------------------- reinit  
     } elsif($userinput =~ /^reinit/) { # Encoded and manager  
  if (($wasenc == 1) && isManager) {  
     my $cert = GetCertificate($userinput);  
     if(ValidManager($cert)) {  
  chomp($userinput);  
  my $reply = ReinitProcess($userinput);  
  print $client  "$reply\n";  
     } else {  
  print $client "refused\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
  }  
 #------------------------------------------------------------------------- edit  
     } elsif ($userinput =~ /^edit/) {    # encoded and manager:  
  if(($wasenc ==1) && (isManager)) {  
     my $cert = GetCertificate($userinput);  
     if(ValidManager($cert)) {  
  my($command, $filetype, $script) = split(/:/, $userinput);  
  if (($filetype eq "hosts") || ($filetype eq "domain")) {  
     if($script ne "") {  
  Reply($client, EditFile($userinput));  
     } else {  
  Reply($client,"refused\n",$userinput);  
     }  
  } else {  
     Reply($client,"refused\n",$userinput);  
  }  
             } else {  
  Reply($client,"refused\n",$userinput);  
             }  
  } else {  
     Reply($client,"refused\n",$userinput);  
  }  
 # ------------------------------------------------------------------------ auth  
     } elsif ($userinput =~ /^auth/) { # Encoded and client only.  
  if (($wasenc==1) && isClient) {  
     my ($cmd,$udom,$uname,$upass)=split(/:/,$userinput);  
     chomp($upass);  
     $upass=unescape($upass);  
     my $proname=propath($udom,$uname);  
     my $passfilename="$proname/passwd";  
     if (-e $passfilename) {  
  my $pf = IO::File->new($passfilename);  
  my $realpasswd=<$pf>;  
  chomp($realpasswd);  
  my ($howpwd,$contentpwd)=split(/:/,$realpasswd);  
  my $pwdcorrect=0;  
  if ($howpwd eq 'internal') {  
     &Debug("Internal auth");  
     $pwdcorrect=  
  (crypt($upass,$contentpwd) eq $contentpwd);  
  } elsif ($howpwd eq 'unix') {  
     &Debug("Unix auth");  
     if((getpwnam($uname))[1] eq "") { #no such user!  
  $pwdcorrect = 0;  
     } else {  
  $contentpwd=(getpwnam($uname))[1];  
  my $pwauth_path="/usr/local/sbin/pwauth";  
  unless ($contentpwd eq 'x') {  
     $pwdcorrect=  
  (crypt($upass,$contentpwd) eq   
  $contentpwd);  
  }  
   
  elsif (-e $pwauth_path) {  
     open PWAUTH, "|$pwauth_path" or  
  die "Cannot invoke authentication";  
     print PWAUTH "$uname\n$upass\n";  
     close PWAUTH;  
     $pwdcorrect=!$?;  
  }  
     }  
  } elsif ($howpwd eq 'krb4') {  
     my $null=pack("C",0);  
     unless ($upass=~/$null/) {  
  my $krb4_error = &Authen::Krb4::get_pw_in_tkt  
     ($uname,"",$contentpwd,'krbtgt',  
      $contentpwd,1,$upass);  
  if (!$krb4_error) {  
     $pwdcorrect = 1;  
  } else {   
     $pwdcorrect=0;   
     # log error if it is not a bad password  
     if ($krb4_error != 62) {  
  &logthis('krb4:'.$uname.','.  
  &Authen::Krb4::get_err_txt($Authen::Krb4::error));  
     }  
  }  
     }  
  } elsif ($howpwd eq 'krb5') {  
     my $null=pack("C",0);  
     unless ($upass=~/$null/) {  
  my $krbclient=&Authen::Krb5::parse_name($uname.'@'.$contentpwd);  
  my $krbservice="krbtgt/".$contentpwd."\@".$contentpwd;  
  my $krbserver=&Authen::Krb5::parse_name($krbservice);  
  my $credentials=&Authen::Krb5::cc_default();  
  $credentials->initialize($krbclient);  
  my $krbreturn =   
     &Authen::Krb5::get_in_tkt_with_password(  
     $krbclient,$krbserver,$upass,$credentials);  
 #  unless ($krbreturn) {  
 #      &logthis("Krb5 Error: ".  
 #       &Authen::Krb5::error());  
 #  }  
  $pwdcorrect = ($krbreturn == 1);  
     } else { $pwdcorrect=0; }  
  } elsif ($howpwd eq 'localauth') {  
     $pwdcorrect=&localauth::localauth($uname,$upass,  
       $contentpwd);  
  }  
  if ($pwdcorrect) {  
     print $client "authorized\n";  
  } else {  
     print $client "non_authorized\n";  
  }    
     } else {  
  print $client "unknown_user\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ---------------------------------------------------------------------- passwd  
     } elsif ($userinput =~ /^passwd/) { # encoded and client  
  if (($wasenc==1) && isClient) {  
     my   
  ($cmd,$udom,$uname,$upass,$npass)=split(/:/,$userinput);  
     chomp($npass);  
     $upass=&unescape($upass);  
     $npass=&unescape($npass);  
     &Debug("Trying to change password for $uname");  
     my $proname=propath($udom,$uname);  
     my $passfilename="$proname/passwd";  
     if (-e $passfilename) {  
  my $realpasswd;  
  { my $pf = IO::File->new($passfilename);  
   $realpasswd=<$pf>; }  
  chomp($realpasswd);  
  my ($howpwd,$contentpwd)=split(/:/,$realpasswd);  
  if ($howpwd eq 'internal') {  
     &Debug("internal auth");  
     if (crypt($upass,$contentpwd) eq $contentpwd) {  
  my $salt=time;  
  $salt=substr($salt,6,2);  
  my $ncpass=crypt($npass,$salt);  
  {  
     my $pf;  
     if ($pf = IO::File->new(">$passfilename")) {  
  print $pf "internal:$ncpass\n";  
  &logthis("Result of password change for $uname: pwchange_success");  
  print $client "ok\n";  
     } else {  
  &logthis("Unable to open $uname passwd to change password");  
  print $client "non_authorized\n";  
     }  
  }               
   
     } else {  
  print $client "non_authorized\n";  
     }  
  } elsif ($howpwd eq 'unix') {  
     # Unix means we have to access /etc/password  
     # one way or another.  
     # First: Make sure the current password is  
     #        correct  
     &Debug("auth is unix");  
     $contentpwd=(getpwnam($uname))[1];  
     my $pwdcorrect = "0";  
     my $pwauth_path="/usr/local/sbin/pwauth";  
     unless ($contentpwd eq 'x') {  
  $pwdcorrect=  
     (crypt($upass,$contentpwd) eq $contentpwd);  
     } elsif (-e $pwauth_path) {  
  open PWAUTH, "|$pwauth_path" or  
     die "Cannot invoke authentication";  
  print PWAUTH "$uname\n$upass\n";  
  close PWAUTH;  
  &Debug("exited pwauth with $? ($uname,$upass) ");  
  $pwdcorrect=($? == 0);  
     }  
     if ($pwdcorrect) {  
  my $execdir=$perlvar{'lonDaemons'};  
  &Debug("Opening lcpasswd pipeline");  
  my $pf = IO::File->new("|$execdir/lcpasswd > $perlvar{'lonDaemons'}/logs/lcpasswd.log");  
  print $pf "$uname\n$npass\n$npass\n";  
  close $pf;  
  my $err = $?;  
  my $result = ($err>0 ? 'pwchange_failure'   
       : 'ok');  
  &logthis("Result of password change for $uname: ".  
  &lcpasswdstrerror($?));  
  print $client "$result\n";  
     } else {  
  print $client "non_authorized\n";  
     }  
  } else {  
     print $client "auth_mode_error\n";  
  }    
     } else {  
  print $client "unknown_user\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # -------------------------------------------------------------------- makeuser  # -------------------------------------------------------------------- makeuser
     } elsif ($userinput =~ /^makeuser/) { # encoded and client.      if ($userinput =~ /^makeuser/) { # encoded and client.
  &Debug("Make user received");   &Debug("Make user received");
  my $oldumask=umask(0077);   my $oldumask=umask(0077);
  if (($wasenc==1) && isClient) {   if (($wasenc==1) && isClient) {
Line 1617  sub process_request { Line 1691  sub process_request {
     } else {      } else {
  my $result=&make_passwd_file($uname, $umode,$npass,   my $result=&make_passwd_file($uname, $umode,$npass,
      $passfilename);       $passfilename);
  print $client $result;   Reply($client, $result, $userinput);
     }      }
  } else {   } else {
     Reply($client, "refused\n", $userinput);      Reply($client, "refused\n", $userinput);
Line 1964  sub process_request { Line 2038  sub process_request {
     foreach my $pair (@pairs) {      foreach my $pair (@pairs) {
  my ($key,$value)=split(/=/,$pair);   my ($key,$value)=split(/=/,$pair);
  &ManagePermissions($key, $udom, $uname,   &ManagePermissions($key, $udom, $uname,
    &GetAuthType( $udom,      &get_auth_type( $udom, 
  $uname));   $uname));
  $hash{$key}=$value;   $hash{$key}=$value;
     }      }
Line 3191  sub checkchildren { Line 3265  sub checkchildren {
     &logthis('Going to check on the children');      &logthis('Going to check on the children');
     my $docdir=$perlvar{'lonDocRoot'};      my $docdir=$perlvar{'lonDocRoot'};
     foreach (sort keys %children) {      foreach (sort keys %children) {
  sleep 1;   #sleep 1;
         unless (kill 'USR1' => $_) {          unless (kill 'USR1' => $_) {
     &logthis ('Child '.$_.' is dead');      &logthis ('Child '.$_.' is dead');
             &logstatus($$.' is dead');              &logstatus($$.' is dead');
       delete($children{$_});
         }           } 
     }      }
     sleep 5;      sleep 5;
Line 3213  sub checkchildren { Line 3288  sub checkchildren {
     #my $result=`echo 'Killed lond process $_.' | mailto $emailto -s '$subj' > /dev/null`;      #my $result=`echo 'Killed lond process $_.' | mailto $emailto -s '$subj' > /dev/null`;
     #$execdir=$perlvar{'lonDaemons'};      #$execdir=$perlvar{'lonDaemons'};
     #$result=`/bin/cp $execdir/logs/lond.log $execdir/logs/lond.log.$_`;      #$result=`/bin/cp $execdir/logs/lond.log $execdir/logs/lond.log.$_`;
       delete($children{$_});
     alarm(0);      alarm(0);
   }    }
         }          }
Line 3220  sub checkchildren { Line 3296  sub checkchildren {
     $SIG{ALRM} = 'DEFAULT';      $SIG{ALRM} = 'DEFAULT';
     $SIG{__DIE__} = \&catchexception;      $SIG{__DIE__} = \&catchexception;
     &status("Finished checking children");      &status("Finished checking children");
       &logthis('Finished Checking children');
 }  }
   
 # --------------------------------------------------------------------- Logging  # --------------------------------------------------------------------- Logging
Line 3290  sub logstatus { Line 3367  sub logstatus {
     &status("Doing logging");      &status("Doing logging");
     my $docdir=$perlvar{'lonDocRoot'};      my $docdir=$perlvar{'lonDocRoot'};
     {      {
     my $fh=IO::File->new(">>$docdir/lon-status/londstatus.txt");  
     print $fh $$."\t".$clientname."\t".$currenthostid."\t"  
  .$status."\t".$lastlog."\t $keymode\n";  
     $fh->close();  
     }  
     &status("Finished londstatus.txt");  
     {  
  my $fh=IO::File->new(">$docdir/lon-status/londchld/$$.txt");   my $fh=IO::File->new(">$docdir/lon-status/londchld/$$.txt");
         print $fh $status."\n".$lastlog."\n".time."\n$keymode";          print $fh $status."\n".$lastlog."\n".time."\n$keymode";
         $fh->close();          $fh->close();
     }      }
       &status("Finished $$.txt");
       {
    open(LOG,">>$docdir/lon-status/londstatus.txt");
    flock(LOG,LOCK_EX);
    print LOG $$."\t".$clientname."\t".$currenthostid."\t"
       .$status."\t".$lastlog."\t $keymode\n";
    flock(DB,LOCK_UN);
    close(LOG);
       }
     &status("Finished logging");      &status("Finished logging");
 }  }
   
Line 3752  sub ManagePermissions Line 3831  sub ManagePermissions
  system("$execdir/lchtmldir $userhome $user $authtype");   system("$execdir/lchtmldir $userhome $user $authtype");
     }      }
 }  }
   
   
   #
   #  Return the full path of a user password file, whether it exists or not.
   # Parameters:
   #   domain     - Domain in which the password file lives.
   #   user       - name of the user.
   # Returns:
   #    Full passwd path:
   #
   sub password_path {
       my ($domain, $user) = @_;
   
   
       my $path   = &propath($domain, $user);
       $path  .= "/passwd";
   
       return $path;
   }
   
   #   Password Filename
   #   Returns the path to a passwd file given domain and user... only if
   #  it exists.
   # Parameters:
   #   domain    - Domain in which to search.
   #   user      - username.
   # Returns:
   #   - If the password file exists returns its path.
   #   - If the password file does not exist, returns undefined.
   #
   sub password_filename {
       my ($domain, $user) = @_;
   
       Debug ("PasswordFilename called: dom = $domain user = $user");
   
       my $path  = &password_path($domain, $user);
       Debug("PasswordFilename got path: $path");
       if(-e $path) {
    return $path;
       } else {
    return undef;
       }
   }
   
 #  #
 #   GetAuthType - Determines the authorization type of a user in a domain.  #   Rewrite the contents of the user's passwd file.
   #  Parameters:
   #    domain    - domain of the user.
   #    name      - User's name.
   #    contents  - New contents of the file.
   # Returns:
   #   0    - Failed.
   #   1    - Success.
   #
   sub rewrite_password_file {
       my ($domain, $user, $contents) = @_;
   
       my $file = &password_filename($domain, $user);
       if (defined $file) {
    my $pf = IO::File->new(">$file");
    if($pf) {
       print $pf "$contents\n";
       return 1;
    } else {
       return 0;
    }
       } else {
    return 0;
       }
   
   }
   
   #
   #   get_auth_type - Determines the authorization type of a user in a domain.
   
 #     Returns the authorization type or nouser if there is no such user.  #     Returns the authorization type or nouser if there is no such user.
 #  #
 sub GetAuthType   sub get_auth_type 
 {  {
   
     my ($domain, $user)  = @_;      my ($domain, $user)  = @_;
   
     Debug("GetAuthType( $domain, $user ) \n");      Debug("get_auth_type( $domain, $user ) \n");
     my $proname    = &propath($domain, $user);       my $proname    = &propath($domain, $user); 
     my $passwdfile = "$proname/passwd";      my $passwdfile = "$proname/passwd";
     if( -e $passwdfile ) {      if( -e $passwdfile ) {
Line 3785  sub GetAuthType Line 3936  sub GetAuthType
     }      }
 }  }
   
   #
   #  Validate a user given their domain, name and password.  This utility
   #  function is used by both  AuthenticateHandler and ChangePasswordHandler
   #  to validate the login credentials of a user.
   # Parameters:
   #    $domain    - The domain being logged into (this is required due to
   #                 the capability for multihomed systems.
   #    $user      - The name of the user being validated.
   #    $password  - The user's propoposed password.
   #
   # Returns:
   #     1        - The domain,user,pasword triplet corresponds to a valid
   #                user.
   #     0        - The domain,user,password triplet is not a valid user.
   #
   sub validate_user {
       my ($domain, $user, $password) = @_;
   
   
       # Why negative ~pi you may well ask?  Well this function is about
       # authentication, and therefore very important to get right.
       # I've initialized the flag that determines whether or not I've 
       # validated correctly to a value it's not supposed to get.
       # At the end of this function. I'll ensure that it's not still that
       # value so we don't just wind up returning some accidental value
       # as a result of executing an unforseen code path that
       # did not set $validated.
   
       my $validated = -3.14159;
   
       #  How we authenticate is determined by the type of authentication
       #  the user has been assigned.  If the authentication type is
       #  "nouser", the user does not exist so we will return 0.
   
       my $contents = &get_auth_type($domain, $user);
       my ($howpwd, $contentpwd) = split(/:/, $contents);
   
       my $null = pack("C",0); # Used by kerberos auth types.
   
       if ($howpwd ne 'nouser') {
   
    if($howpwd eq "internal") { # Encrypted is in local password file.
       $validated = (crypt($password, $contentpwd) eq $contentpwd);
    }
    elsif ($howpwd eq "unix") { # User is a normal unix user.
       $contentpwd = (getpwnam($user))[1];
       if($contentpwd) {
    if($contentpwd eq 'x') { # Shadow password file...
       my $pwauth_path = "/usr/local/sbin/pwauth";
       open PWAUTH,  "|$pwauth_path" or
    die "Cannot invoke authentication";
       print PWAUTH "$user\n$password\n";
       close PWAUTH;
       $validated = ! $?;
   
    } else {         # Passwords in /etc/passwd. 
       $validated = (crypt($password,
    $contentpwd) eq $contentpwd);
    }
       } else {
    $validated = 0;
       }
    }
    elsif ($howpwd eq "krb4") { # user is in kerberos 4 auth. domain.
       if(! ($password =~ /$null/) ) {
    my $k4error = &Authen::Krb4::get_pw_in_tkt($user,
      "",
      $contentpwd,,
      'krbtgt',
      $contentpwd,
      1,
      $password);
    if(!$k4error) {
       $validated = 1;
    }
    else {
       $validated = 0;
       &logthis('krb4: '.$user.', '.$contentpwd.', '.
        &Authen::Krb4::get_err_txt($Authen::Krb4::error));
    }
       }
       else {
    $validated = 0; # Password has a match with null.
       }
    }
    elsif ($howpwd eq "krb5") { # User is in kerberos 5 auth. domain.
       if(!($password =~ /$null/)) { # Null password not allowed.
    my $krbclient = &Authen::Krb5::parse_name($user.'@'
     .$contentpwd);
    my $krbservice = "krbtgt/".$contentpwd."\@".$contentpwd;
    my $krbserver  = &Authen::Krb5::parse_name($krbservice);
    my $credentials= &Authen::Krb5::cc_default();
    $credentials->initialize($krbclient);
    my $krbreturn  = &Authen::KRb5::get_in_tkt_with_password($krbclient,
    $krbserver,
    $password,
    $credentials);
    $validated = ($krbreturn == 1);
       }
       else {
    $validated = 0;
       }
    }
    elsif ($howpwd eq "localauth") { 
       #  Authenticate via installation specific authentcation method:
       $validated = &localauth::localauth($user, 
          $password, 
          $contentpwd);
    }
    else { # Unrecognized auth is also bad.
       $validated = 0;
    }
       } else {
    $validated = 0;
       }
       #
       #  $validated has the correct stat of the authentication:
       #
   
       unless ($validated != -3.14159) {
    die "ValidateUser - failed to set the value of validated";
       }
       return $validated;
   }
   
   
 sub addline {  sub addline {
     my ($fname,$hostid,$ip,$newline)=@_;      my ($fname,$hostid,$ip,$newline)=@_;
     my $contents;      my $contents;
Line 4030  sub make_passwd_file { Line 4307  sub make_passwd_file {
  return "no_priv_account_error\n";   return "no_priv_account_error\n";
     }      }
   
     my $execpath="$perlvar{'lonDaemons'}/"."lcuseradd";      my $execpath       ="$perlvar{'lonDaemons'}/"."lcuseradd";
       my $lc_error_file  = "/tmp/lcuseradd".$$.".status";
     {      {
  &Debug("Executing external: ".$execpath);   &Debug("Executing external: ".$execpath);
  &Debug("user  = ".$uname.", Password =". $npass);   &Debug("user  = ".$uname.", Password =". $npass);
Line 4038  sub make_passwd_file { Line 4316  sub make_passwd_file {
  print $se "$uname\n";   print $se "$uname\n";
  print $se "$npass\n";   print $se "$npass\n";
  print $se "$npass\n";   print $se "$npass\n";
    print $se "$lc_error_file\n"; # Status -> unique file.
     }      }
     my $useraddok = $?;      my $error = IO::File->new("< $lc_error_file");
       my $useraddok = <$error>;
       $error->close;
       unlink($lc_error_file);
   
       chomp $useraddok;
   
     if($useraddok > 0) {      if($useraddok > 0) {
  &logthis("Failed lcuseradd: ".&lcuseraddstrerror($useraddok));   my $error_text = &lcuseraddstrerror($useraddok);
    &logthis("Failed lcuseradd: $error_text");
    $result = "lcuseradd_failed:$error_text\n";
       }
       else {
    my $pf = IO::File->new(">$passfilename");
    print $pf "unix:\n";
     }      }
     my $pf = IO::File->new(">$passfilename");  
     print $pf "unix:\n";  
  }   }
     } elsif ($umode eq 'none') {      } elsif ($umode eq 'none') {
  {   {
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new("> $passfilename");
     print $pf "none:\n";      print $pf "none:\n";
  }   }
     } else {      } else {

Removed from v.1.217  
changed lines
  Added in v.1.223


FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>