--- loncom/lond 2004/10/18 10:13:46 1.261 +++ loncom/lond 2005/12/09 21:17:16 1.303 @@ -2,7 +2,7 @@ # The LearningOnline Network # lond "LON Daemon" Server (port "LOND" 5663) # -# $Id: lond,v 1.261 2004/10/18 10:13:46 foxr Exp $ +# $Id: lond,v 1.303 2005/12/09 21:17:16 albertel Exp $ # # Copyright Michigan State University Board of Trustees # @@ -46,7 +46,9 @@ use Authen::Krb5; use lib '/home/httpd/lib/perl/'; use localauth; use localenroll; +use localstudentphoto; use File::Copy; +use File::Find; use LONCAPA::ConfigFileEdit; use LONCAPA::lonlocal; use LONCAPA::lonssl; @@ -57,14 +59,13 @@ my $DEBUG = 0; # Non zero to ena my $status=''; my $lastlog=''; -my $VERSION='$Revision: 1.261 $'; #' stupid emacs +my $VERSION='$Revision: 1.303 $'; #' stupid emacs my $remoteVERSION; my $currenthostid="default"; my $currentdomainid; my $client; my $clientip; # IP address of client. -my $clientdns; # DNS name of client. my $clientname; # LonCAPA name of client. my $server; @@ -112,20 +113,20 @@ my %Dispatcher; # my $lastpwderror = 13; # Largest error number from lcpasswd. my @passwderrors = ("ok", - "lcpasswd must be run as user 'www'", - "lcpasswd got incorrect number of arguments", - "lcpasswd did not get the right nubmer of input text lines", - "lcpasswd too many simultaneous pwd changes in progress", - "lcpasswd User does not exist.", - "lcpasswd Incorrect current passwd", - "lcpasswd Unable to su to root.", - "lcpasswd Cannot set new passwd.", - "lcpasswd Username has invalid characters", - "lcpasswd Invalid characters in password", - "lcpasswd User already exists", - "lcpasswd Something went wrong with user addition.", - "lcpasswd Password mismatch", - "lcpasswd Error filename is invalid"); + "pwchange_failure - lcpasswd must be run as user 'www'", + "pwchange_failure - lcpasswd got incorrect number of arguments", + "pwchange_failure - lcpasswd did not get the right nubmer of input text lines", + "pwchange_failure - lcpasswd too many simultaneous pwd changes in progress", + "pwchange_failure - lcpasswd User does not exist.", + "pwchange_failure - lcpasswd Incorrect current passwd", + "pwchange_failure - lcpasswd Unable to su to root.", + "pwchange_failure - lcpasswd Cannot set new passwd.", + "pwchange_failure - lcpasswd Username has invalid characters", + "pwchange_failure - lcpasswd Invalid characters in password", + "pwchange_failure - lcpasswd User already exists", + "pwchange_failure - lcpasswd Something went wrong with user addition.", + "pwchange_failure - lcpasswd Password mismatch", + "pwchange_failure - lcpasswd Error filename is invalid"); # The array below are lcuseradd error strings.: @@ -177,7 +178,6 @@ sub ResetStatistics { # $initcmd - The full text of the init command. # # Implicit inputs: -# $clientdns - The DNS name of the remote client. # $thisserver - Our DNS name. # # Returns: @@ -186,10 +186,10 @@ sub ResetStatistics { # sub LocalConnection { my ($Socket, $initcmd) = @_; - Debug("Attempting local connection: $initcmd client: $clientdns me: $thisserver"); - if($clientdns ne $thisserver) { + Debug("Attempting local connection: $initcmd client: $clientip me: $thisserver"); + if($clientip ne "127.0.0.1") { &logthis(' LocalConnection rejecting non local: ' - ."$clientdns ne $thisserver "); + ."$clientip ne $thisserver "); close $Socket; return undef; } else { @@ -473,39 +473,11 @@ sub CopyFile { my ($oldfile, $newfile) = @_; - # The file must exist: - - if(-e $oldfile) { - - # Read the old file. - - my $oldfh = IO::File->new("< $oldfile"); - if(!$oldfh) { - return 0; - } - my @contents = <$oldfh>; # Suck in the entire file. - - # write the backup file: - - my $newfh = IO::File->new("> $newfile"); - if(!(defined $newfh)){ - return 0; - } - my $lines = scalar @contents; - for (my $i =0; $i < $lines; $i++) { - print $newfh ($contents[$i]); - } - - $oldfh->close; - $newfh->close; - - chmod(0660, $newfile); - - return 1; - - } else { - return 0; + if (! copy($oldfile,$newfile)) { + return 0; } + chmod(0660, $newfile); + return 1; } # # Host files are passed out with externally visible host IPs. @@ -1130,7 +1102,6 @@ sub read_profile { # 0 - Program should exit. # Side effects: # Reply information is sent to the client. - sub ping_handler { my ($cmd, $tail, $client) = @_; Debug("$cmd $tail $client .. $currenthostid:"); @@ -1158,7 +1129,6 @@ sub ping_handler { # 0 - Program should exit. # Side effects: # Reply information is sent to the client. - sub pong_handler { my ($cmd, $tail, $replyfd) = @_; @@ -1213,7 +1183,6 @@ sub establish_key_handler { } ®ister_handler("ekey", \&establish_key_handler, 0, 1,1); - # Handler for the load command. Returns the current system load average # to the requestor. # @@ -1248,7 +1217,7 @@ sub load_handler { return 1; } -register_handler("load", \&load_handler, 0, 1, 0); +®ister_handler("load", \&load_handler, 0, 1, 0); # # Process the userload request. This sub returns to the client the current @@ -1278,7 +1247,7 @@ sub user_load_handler { return 1; } -register_handler("userload", \&user_load_handler, 0, 1, 0); +®ister_handler("userload", \&user_load_handler, 0, 1, 0); # Process a request for the authorization type of a user: # (userauth). @@ -1314,8 +1283,10 @@ sub user_authorization_type { my ($type,$otherinfo) = split(/:/,$result); if($type =~ /^krb/) { $type = $result; - } - &Reply( $replyfd, "$type:\n", $userinput); + } else { + $type .= ':'; + } + &Reply( $replyfd, "$type\n", $userinput); } return 1; @@ -1335,7 +1306,6 @@ sub user_authorization_type { # 0 - Program should exit # Implicit Output: # a reply is written to the client. - sub push_file_handler { my ($cmd, $tail, $client) = @_; @@ -1378,7 +1348,6 @@ sub push_file_handler { # Side Effects: # The reply is written to $client. # - sub du_handler { my ($cmd, $ududir, $client) = @_; my ($ududir) = split(/:/,$ududir); # Make 'telnet' testing easier. @@ -1395,24 +1364,26 @@ sub du_handler { # etc. # if (-d $ududir) { - # And as Shakespeare would say to make - # assurance double sure, - # use execute_command to ensure that the command is not executed in - # a shell that can screw us up. - - my $duout = execute_command("du -ks $ududir"); - $duout=~s/[^\d]//g; #preserve only the numbers - &Reply($client,"$duout\n","$cmd:$ududir"); + my $total_size=0; + my $code=sub { + if ($_=~/\.\d+\./) { return;} + if ($_=~/\.meta$/) { return;} + $total_size+=(stat($_))[7]; + }; + chdir($ududir); + find($code,$ududir); + $total_size=int($total_size/1024); + &Reply($client,"$total_size\n","$cmd:$ududir"); } else { - &Failure($client, "bad_directory:$ududir\n","$cmd:$ududir"); - } return 1; } ®ister_handler("du", \&du_handler, 0, 1, 0); - +# +# The ls_handler routine should be considered obosolete and is retained +# for communication with legacy servers. Please see the ls2_handler. # # ls - list the contents of a directory. For each file in the # selected directory the filename followed by the full output of @@ -1430,6 +1401,7 @@ sub du_handler { # The reply is written to $client. # sub ls_handler { + # obsoleted by ls2_handler my ($cmd, $ulsdir, $client) = @_; my $userinput = "$cmd:$ulsdir"; @@ -1442,14 +1414,15 @@ sub ls_handler { if(-d $ulsdir) { if (opendir(LSDIR,$ulsdir)) { while ($ulsfn=readdir(LSDIR)) { - undef $obs, $rights; + undef($obs); + undef($rights); my @ulsstats=stat($ulsdir.'/'.$ulsfn); #We do some obsolete checking here if(-e $ulsdir.'/'.$ulsfn.".meta") { open(FILE, $ulsdir.'/'.$ulsfn.".meta"); my @obsolete=; foreach my $obsolete (@obsolete) { - if($obsolete =~ m|()(on)|) { $obs = 1; } + if($obsolete =~ m/()(on|1)/) { $obs = 1; } if($obsolete =~ m|()(default)|) { $rights = 1; } } } @@ -1476,8 +1449,72 @@ sub ls_handler { } ®ister_handler("ls", \&ls_handler, 0, 1, 0); +# +# Please also see the ls_handler, which this routine obosolets. +# ls2_handler differs from ls_handler in that it escapes its return +# values before concatenating them together with ':'s. +# +# ls2 - list the contents of a directory. For each file in the +# selected directory the filename followed by the full output of +# the stat function is returned. The returned info for each +# file are separated by ':'. The stat fields are separated by &'s. +# Parameters: +# $cmd - The command that dispatched us (ls). +# $ulsdir - The directory path to list... I'm not sure what this +# is relative as things like ls:. return e.g. +# no_such_dir. +# $client - Socket open on the client. +# Returns: +# 1 - indicating that the daemon should not disconnect. +# Side Effects: +# The reply is written to $client. +# +sub ls2_handler { + my ($cmd, $ulsdir, $client) = @_; + my $userinput = "$cmd:$ulsdir"; + my $obs; + my $rights; + my $ulsout=''; + my $ulsfn; + if (-e $ulsdir) { + if(-d $ulsdir) { + if (opendir(LSDIR,$ulsdir)) { + while ($ulsfn=readdir(LSDIR)) { + undef($obs); + undef($rights); + my @ulsstats=stat($ulsdir.'/'.$ulsfn); + #We do some obsolete checking here + if(-e $ulsdir.'/'.$ulsfn.".meta") { + open(FILE, $ulsdir.'/'.$ulsfn.".meta"); + my @obsolete=; + foreach my $obsolete (@obsolete) { + if($obsolete =~ m/()(on|1)/) { $obs = 1; } + if($obsolete =~ m|()(default)|) { + $rights = 1; + } + } + } + my $tmp = $ulsfn.'&'.join('&',@ulsstats); + if ($obs eq '1') { $tmp.="&1"; } else { $tmp.="&0"; } + if ($rights eq '1') { $tmp.="&1"; } else { $tmp.="&0"; } + $ulsout.= &escape($tmp).':'; + } + closedir(LSDIR); + } + } else { + my @ulsstats=stat($ulsdir); + $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':'; + } + } else { + $ulsout='no_such_dir'; + } + if ($ulsout eq '') { $ulsout='empty'; } + &Reply($client, "$ulsout\n", $userinput); # This supports debug logging. + return 1; +} +®ister_handler("ls2", \&ls2_handler, 0, 1, 0); # Process a reinit request. Reinit requests that either # lonc or lond be reinitialized so that an updated @@ -1508,7 +1545,6 @@ sub reinit_process_handler { } return 1; } - ®ister_handler("reinit", \&reinit_process_handler, 1, 0, 1); # Process the editing script for a table edit operation. @@ -1550,8 +1586,7 @@ sub edit_table_handler { } return 1; } -register_handler("edit", \&edit_table_handler, 1, 0, 1); - +®ister_handler("edit", \&edit_table_handler, 1, 0, 1); # # Authenticate a user against the LonCAPA authentication @@ -1606,8 +1641,7 @@ sub authenticate_handler { return 1; } - -register_handler("auth", \&authenticate_handler, 1, 1, 0); +®ister_handler("auth", \&authenticate_handler, 1, 1, 0); # # Change a user's password. Note that this function is complicated by @@ -1670,19 +1704,9 @@ sub change_password_handler { &Failure( $client, "non_authorized\n",$userinput); } } elsif ($howpwd eq 'unix') { - # Unix means we have to access /etc/password - &Debug("auth is unix"); - my $execdir=$perlvar{'lonDaemons'}; - &Debug("Opening lcpasswd pipeline"); - my $pf = IO::File->new("|$execdir/lcpasswd > " - ."$perlvar{'lonDaemons'}" - ."/logs/lcpasswd.log"); - print $pf "$uname\n$npass\n$npass\n"; - close $pf; - my $err = $?; - my $result = ($err>0 ? 'pwchange_failure' : 'ok'); + my $result = &change_unix_password($uname, $npass); &logthis("Result of password change for $uname: ". - &lcpasswdstrerror($?)); + $result); &Reply($client, "$result\n", $userinput); } else { # this just means that the current password mode is not @@ -1698,8 +1722,7 @@ sub change_password_handler { return 1; } -register_handler("passwd", \&change_password_handler, 1, 1, 0); - +®ister_handler("passwd", \&change_password_handler, 1, 1, 0); # # Create a new user. User in this case means a lon-capa user. @@ -1738,18 +1761,10 @@ sub add_user_handler { if (-e $passfilename) { &Failure( $client, "already_exists\n", $userinput); } else { - my @fpparts=split(/\//,$passfilename); - my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2]; my $fperror=''; - for (my $i=3;$i<= ($#fpparts-1);$i++) { - $fpnow.='/'.$fpparts[$i]; - unless (-e $fpnow) { - &logthis("mkdir $fpnow"); - unless (mkdir($fpnow,0777)) { - $fperror="error: ".($!+0)." mkdir failed while attempting " - ."makeuser"; - } - } + if (!&mkpath($passfilename)) { + $fperror="error: ".($!+0)." mkdir failed while attempting " + ."makeuser"; } unless ($fperror) { my $result=&make_passwd_file($uname, $umode,$npass, $passfilename); @@ -1790,6 +1805,9 @@ sub add_user_handler { # Implicit inputs: # The authentication systems describe above have their own forms of implicit # input into the authentication process that are described above. +# NOTE: +# This is also used to change the authentication credential values (e.g. passwd). +# # sub change_authentication_handler { @@ -1809,23 +1827,41 @@ sub change_authentication_handler { my $oldauth = &get_auth_type($udom, $uname); # Get old auth info. my $passfilename = &password_path($udom, $uname); if ($passfilename) { # Not allowed to create a new user!! - my $result=&make_passwd_file($uname, $umode,$npass,$passfilename); - # - # If the current auth mode is internal, and the old auth mode was - # unix, or krb*, and the user is an author for this domain, - # re-run manage_permissions for that role in order to be able - # to take ownership of the construction space back to www:www - # - - if( ($oldauth =~ /^unix/) && ($umode eq "internal")) { # unix -> internal - if(&is_author($udom, $uname)) { - &Debug(" Need to manage author permissions..."); - &manage_permissions("/$udom/_au", $udom, $uname, "internal:"); + # If just changing the unix passwd. need to arrange to run + # passwd since otherwise make_passwd_file will run + # lcuseradd which fails if an account already exists + # (to prevent an unscrupulous LONCAPA admin from stealing + # an existing account by overwriting it as a LonCAPA account). + + if(($oldauth =~/^unix/) && ($umode eq "unix")) { + my $result = &change_unix_password($uname, $npass); + &logthis("Result of password change for $uname: ".$result); + if ($result eq "ok") { + &Reply($client, "$result\n") + } else { + &Failure($client, "$result\n"); } + } else { + my $result=&make_passwd_file($uname, $umode,$npass,$passfilename); + # + # If the current auth mode is internal, and the old auth mode was + # unix, or krb*, and the user is an author for this domain, + # re-run manage_permissions for that role in order to be able + # to take ownership of the construction space back to www:www + # + + + if( (($oldauth =~ /^unix/) && ($umode eq "internal")) || + (($oldauth =~ /^internal/) && ($umode eq "unix")) ) { + if(&is_author($udom, $uname)) { + &Debug(" Need to manage author permissions..."); + &manage_permissions("/$udom/_au", $udom, $uname, "$umode:"); + } + } + &Reply($client, $result, $userinput); } - &Reply($client, $result, $userinput); } else { &Failure($client, "non_authorized\n", $userinput); # Fail the user now. } @@ -1937,6 +1973,13 @@ sub update_resource_handler { alarm(0); } rename($transname,$fname); + use Cache::Memcached; + my $memcache= + new Cache::Memcached({'servers'=>['127.0.0.1:11211']}); + my $url=$fname; + $url=~s-^/home/httpd/html--; + my $id=&escape('meta:'.$url); + $memcache->delete($id); } } &Reply( $client, "ok\n", $userinput); @@ -1980,21 +2023,10 @@ sub fetch_user_file_handler { # Note that any regular files in the way of this path are # wiped out to deal with some earlier folly of mine. - my $path = $udir; - if ($ufile =~m|(.+)/([^/]+)$|) { - my @parts=split('/',$1); - foreach my $part (@parts) { - $path .= '/'.$part; - if( -f $path) { - unlink($path); - } - if ((-e $path)!=1) { - mkdir($path,0770); - } - } + if (!&mkpath($udir.'/'.$ufile)) { + &Failure($client, "unable_to_create\n", $userinput); } - my $destname=$udir.'/'.$ufile; my $transname=$udir.'/'.$ufile.'.in.transit'; my $remoteurl='http://'.$clientip.'/userfiles/'.$fname; @@ -2038,7 +2070,6 @@ sub fetch_user_file_handler { # # Returns: # 1 - Continue processing. - sub remove_user_file_handler { my ($cmd, $tail, $client) = @_; @@ -2091,7 +2122,6 @@ sub remove_user_file_handler { # # Returns: # 1 - Continue processing. - sub mkdir_user_file_handler { my ($cmd, $tail, $client) = @_; @@ -2105,24 +2135,11 @@ sub mkdir_user_file_handler { } else { my $udir = &propath($udom,$uname); if (-e $udir) { - my $newdir=$udir.'/userfiles/'.$ufile; - if (!-e $newdir) { - my @parts=split('/',$newdir); - my $path; - foreach my $part (@parts) { - $path .= '/'.$part; - if (!-e $path) { - mkdir($path,0770); - } - } - if (!-e $newdir) { - &Failure($client, "failed\n", "$cmd:$tail"); - } else { - &Reply($client, "ok\n", "$cmd:$tail"); - } - } else { - &Failure($client, "not_found\n", "$cmd:$tail"); + my $newdir=$udir.'/userfiles/'.$ufile.'/'; + if (!&mkpath($newdir)) { + &Failure($client, "failed\n", "$cmd:$tail"); } + &Reply($client, "ok\n", "$cmd:$tail"); } else { &Failure($client, "not_home\n", "$cmd:$tail"); } @@ -2140,7 +2157,6 @@ sub mkdir_user_file_handler { # # Returns: # 1 - Continue processing. - sub rename_user_file_handler { my ($cmd, $tail, $client) = @_; @@ -2174,10 +2190,9 @@ sub rename_user_file_handler { } ®ister_handler("renameuserfile", \&rename_user_file_handler, 0,1,0); - # -# Authenticate access to a user file by checking the user's -# session token(?) +# Authenticate access to a user file by checking that the token the user's +# passed also exists in their session file # # Parameters: # cmd - The request keyword that dispatched to tus. @@ -2185,7 +2200,6 @@ sub rename_user_file_handler { # client - Filehandle open on the client. # Return: # 1. - sub token_auth_user_file_handler { my ($cmd, $tail, $client) = @_; @@ -2206,10 +2220,8 @@ sub token_auth_user_file_handler { return 1; } - ®ister_handler("tokenauthuserfile", \&token_auth_user_file_handler, 0,1,0); - # # Unsubscribe from a resource. # @@ -2238,6 +2250,7 @@ sub unsubscribe_handler { return 1; } ®ister_handler("unsub", \&unsubscribe_handler, 0, 1, 0); + # Subscribe to a resource # # Parameters: @@ -2316,7 +2329,7 @@ sub activity_log_handler { return 1; } -register_handler("log", \&activity_log_handler, 0, 1, 0); +®ister_handler("log", \&activity_log_handler, 0, 1, 0); # # Put a namespace entry in a user profile hash. @@ -2367,6 +2380,61 @@ sub put_user_profile_entry { } ®ister_handler("put", \&put_user_profile_entry, 0, 1, 0); +# Put a piece of new data in hash, returns error if entry already exists +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# +sub newput_user_profile_entry { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + my ($udom,$uname,$namespace,$what) =split(/:/,$tail,4); + if ($namespace eq 'roles') { + &Failure( $client, "refused\n", $userinput); + return 1; + } + + chomp($what); + + my $hashref = &tie_user_hash($udom, $uname, $namespace, + &GDBM_WRCREAT(),"N",$what); + if(!$hashref) { + &Failure( $client, "error: ".($!)." tie(GDBM) Failed ". + "while attempting put\n", $userinput); + return 1; + } + + my @pairs=split(/\&/,$what); + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + if (exists($hashref->{$key})) { + &Failure($client, "key_exists: ".$key."\n",$userinput); + return 1; + } + } + + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + $hashref->{$key}=$value; + } + + if (untie(%$hashref)) { + &Reply( $client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) failed ". + "while attempting put\n", + $userinput); + } + return 1; +} +®ister_handler("newput", \&newput_user_profile_entry, 0, 1, 0); + # # Increment a profile entry in the user history file. # The history contains keyword value pairs. In this case, @@ -2397,11 +2465,17 @@ sub increment_user_value_handler { my @pairs=split(/\&/,$what); foreach my $pair (@pairs) { my ($key,$value)=split(/=/,$pair); + $value = &unescape($value); # We could check that we have a number... if (! defined($value) || $value eq '') { $value = 1; } $hashref->{$key}+=$value; + if ($namespace eq 'nohist_resourcetracker') { + if ($hashref->{$key} < 0) { + $hashref->{$key} = 0; + } + } } if (untie(%$hashref)) { &Reply( $client, "ok\n", $userinput); @@ -2421,7 +2495,6 @@ sub increment_user_value_handler { } ®ister_handler("inc", \&increment_user_value_handler, 0, 1, 0); - # # Put a new role for a user. Roles are LonCAPA's packaging of permissions. # Each 'role' a user has implies a set of permissions. Adding a new role @@ -2629,6 +2702,7 @@ sub get_profile_entry_encrypted { return 1; } ®ister_handler("eget", \&get_profile_entry_encrypted, 0, 1, 0); + # # Deletes a key in a user profile database. # @@ -2647,7 +2721,6 @@ sub get_profile_entry_encrypted { # 0 - Exit server. # # - sub delete_profile_entry { my ($cmd, $tail, $client) = @_; @@ -2676,6 +2749,7 @@ sub delete_profile_entry { return 1; } ®ister_handler("del", \&delete_profile_entry, 0, 1, 0); + # # List the set of keys that are defined in a profile database file. # A successful reply from this will contain an & separated list of @@ -2854,7 +2928,6 @@ sub dump_with_regexp { return 1; } - ®ister_handler("dump", \&dump_with_regexp, 0, 1, 0); # Store a set of key=value pairs associated with a versioned name. @@ -2886,7 +2959,7 @@ sub store_handler { chomp($what); my @pairs=split(/\&/,$what); my $hashref = &tie_user_hash($udom, $uname, $namespace, - &GDBM_WRCREAT(), "P", + &GDBM_WRCREAT(), "S", "$rid:$what"); if ($hashref) { my $now = time; @@ -2920,6 +2993,7 @@ sub store_handler { return 1; } ®ister_handler("store", \&store_handler, 0, 1, 0); + # # Dump out all versions of a resource that has key=value pairs associated # with it for each version. These resources are built up via the store @@ -3020,6 +3094,7 @@ sub send_chat_handler { return 1; } ®ister_handler("chatsend", \&send_chat_handler, 0, 1, 0); + # # Retrieve the set of chat messagss from a discussion board. # @@ -3155,6 +3230,14 @@ sub reply_query_handler { # $tail - Tail of the command. In this case consists of a colon # separated list contaning the domain to apply this to and # an ampersand separated list of keyword=value pairs. +# Each value is a colon separated list that includes: +# description, institutional code and course owner. +# For backward compatibility with versions included +# in LON-CAPA 1.1.X (and earlier) and 1.2.X, institutional +# code and/or course owner are preserved from the existing +# record when writing a new record in response to 1.1 or +# 1.2 implementations of lonnet::flushcourselogs(). +# # $client - Socket open on the client. # Returns: # 1 - indicating that processing should continue @@ -3168,7 +3251,7 @@ sub put_course_id_handler { my $userinput = "$cmd:$tail"; - my ($udom, $what) = split(/:/, $tail); + my ($udom, $what) = split(/:/, $tail,2); chomp($what); my $now=time; my @pairs=split(/\&/,$what); @@ -3176,8 +3259,24 @@ sub put_course_id_handler { my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT()); if ($hashref) { foreach my $pair (@pairs) { - my ($key,$descr,$inst_code)=split(/=/,$pair); - $hashref->{$key}=$descr.':'.$inst_code.':'.$now; + my ($key,$courseinfo) = split(/=/,$pair,2); + $courseinfo =~ s/=/:/g; + + my @current_items = split(/:/,$hashref->{$key}); + shift(@current_items); # remove description + pop(@current_items); # remove last access + my $numcurrent = scalar(@current_items); + + my @new_items = split(/:/,$courseinfo); + my $numnew = scalar(@new_items); + if ($numcurrent > 0) { + if ($numnew == 1) { # flushcourselogs() from 1.1 or earlier + $courseinfo .= ':'.join(':',@current_items); + } elsif ($numnew == 2) { # flushcourselogs() from 1.2.X + $courseinfo .= ':'.$current_items[$numcurrent-1]; + } + } + $hashref->{$key}=$courseinfo.':'.$now; } if (untie(%$hashref)) { &Reply( $client, "ok\n", $userinput); @@ -3215,6 +3314,15 @@ sub put_course_id_handler { # description - regular expression that is used to filter # the dump. Only keywords matching this regexp # will be used. +# institutional code - optional supplied code to filter +# the dump. Only courses with an institutional code +# that match the supplied code will be returned. +# owner - optional supplied username of owner to filter +# the dump. Only courses for which the course +# owner matches the supplied username will be +# returned. Implicit assumption that owner +# is a user in the domain in which the +# course database is defined. # $client - The socket open on the client. # Returns: # 1 - Continue processing. @@ -3225,32 +3333,66 @@ sub dump_course_id_handler { my $userinput = "$cmd:$tail"; - my ($udom,$since,$description) =split(/:/,$tail); + my ($udom,$since,$description,$instcodefilter,$ownerfilter,$coursefilter) =split(/:/,$tail); if (defined($description)) { $description=&unescape($description); } else { $description='.'; } + if (defined($instcodefilter)) { + $instcodefilter=&unescape($instcodefilter); + } else { + $instcodefilter='.'; + } + if (defined($ownerfilter)) { + $ownerfilter=&unescape($ownerfilter); + } else { + $ownerfilter='.'; + } + if (defined($coursefilter)) { + $coursefilter=&unescape($coursefilter); + } else { + $coursefilter='.'; + } + unless (defined($since)) { $since=0; } my $qresult=''; my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT()); if ($hashref) { while (my ($key,$value) = each(%$hashref)) { - my ($descr,$lasttime,$inst_code); - if ($value =~ m/^([^\:]*):([^\:]*):(\d+)$/) { - ($descr,$inst_code,$lasttime)=($1,$2,$3); - } else { - ($descr,$lasttime) = split(/\:/,$value); - } + my ($descr,$lasttime,$inst_code,$owner); + my @courseitems = split(/:/,$value); + $lasttime = pop(@courseitems); + ($descr,$inst_code,$owner)=@courseitems; if ($lasttime<$since) { next; } - if ($description eq '.') { - $qresult.=$key.'='.$descr.':'.$inst_code.'&'; - } else { - my $unescapeVal = &unescape($descr); - if (eval('$unescapeVal=~/\Q$description\E/i')) { - $qresult.=$key.'='.$descr.':'.$inst_code.'&'; + my $match = 1; + unless ($description eq '.') { + my $unescapeDescr = &unescape($descr); + unless (eval('$unescapeDescr=~/\Q$description\E/i')) { + $match = 0; } + } + unless ($instcodefilter eq '.' || !defined($instcodefilter)) { + my $unescapeInstcode = &unescape($inst_code); + unless (eval('$unescapeInstcode=~/\Q$instcodefilter\E/i')) { + $match = 0; + } } + unless ($ownerfilter eq '.' || !defined($ownerfilter)) { + my $unescapeOwner = &unescape($owner); + unless (eval('$unescapeOwner=~/\Q$ownerfilter\E/i')) { + $match = 0; + } + } + unless ($coursefilter eq '.' || !defined($coursefilter)) { + my $unescapeCourse = &unescape($key); + unless (eval('$unescapeCourse=~/^$udom(_)\Q$coursefilter\E$/')) { + $match = 0; + } + } + if ($match == 1) { + $qresult.=$key.'='.$descr.':'.$inst_code.':'.$owner.'&'; + } } if (untie(%$hashref)) { chop($qresult); @@ -3314,8 +3456,8 @@ sub put_id_handler { return 1; } - ®ister_handler("idput", \&put_id_handler, 0, 1, 0); + # # Retrieves a set of id values from the id database. # Returns an & separated list of results, one for each requested id to the @@ -3364,10 +3506,264 @@ sub get_id_handler { return 1; } +®ister_handler("idget", \&get_id_handler, 0, 1, 0); + +# +# Puts broadcast e-mail sent by Domain Coordinator in nohist_dcmail database +# +# Parameters +# $cmd - Command keyword that caused us to be dispatched. +# $tail - Tail of the command. Consists of a colon separated: +# domain - the domain whose dcmail we are recording +# email Consists of key=value pair +# where key is unique msgid +# and value is message (in XML) +# $client - Socket open on the client. +# +# Returns: +# 1 - indicating processing should continue. +# Side effects +# reply is written to $client. +# +sub put_dcmail_handler { + my ($cmd,$tail,$client) = @_; + my $userinput = "$cmd:$tail"; + + my ($udom,$what)=split(/:/,$tail); + chomp($what); + my $hashref = &tie_domain_hash($udom, "nohist_dcmail", &GDBM_WRCREAT()); + if ($hashref) { + my ($key,$value)=split(/=/,$what); + $hashref->{$key}=$value; + } + if (untie(%$hashref)) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting dcmailput\n", $userinput); + } + return 1; +} +®ister_handler("dcmailput", \&put_dcmail_handler, 0, 1, 0); + +# +# Retrieves broadcast e-mail from nohist_dcmail database +# Returns to client an & separated list of key=value pairs, +# where key is msgid and value is message information. +# +# Parameters +# $cmd - Command keyword that caused us to be dispatched. +# $tail - Tail of the command. Consists of a colon separated: +# domain - the domain whose dcmail table we dump +# startfilter - beginning of time window +# endfilter - end of time window +# sendersfilter - & separated list of username:domain +# for senders to search for. +# $client - Socket open on the client. +# +# Returns: +# 1 - indicating processing should continue. +# Side effects +# reply (& separated list of msgid=messageinfo pairs) is +# written to $client. +# +sub dump_dcmail_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + my ($udom,$startfilter,$endfilter,$sendersfilter) = split(/:/,$tail); + chomp($sendersfilter); + my @senders = (); + if (defined($startfilter)) { + $startfilter=&unescape($startfilter); + } else { + $startfilter='.'; + } + if (defined($endfilter)) { + $endfilter=&unescape($endfilter); + } else { + $endfilter='.'; + } + if (defined($sendersfilter)) { + $sendersfilter=&unescape($sendersfilter); + @senders = map { &unescape($_) } split(/\&/,$sendersfilter); + } + + my $qresult=''; + my $hashref = &tie_domain_hash($udom, "nohist_dcmail", &GDBM_WRCREAT()); + if ($hashref) { + while (my ($key,$value) = each(%$hashref)) { + my $match = 1; + my ($timestamp,$subj,$uname,$udom) = + split(/:/,&unescape(&unescape($key)),5); # yes, twice really + $timestamp = &unescape($timestamp); + $subj = &unescape($subj); + $uname = &unescape($uname); + $udom = &unescape($udom); + unless ($startfilter eq '.' || !defined($startfilter)) { + if ($timestamp < $startfilter) { + $match = 0; + } + } + unless ($endfilter eq '.' || !defined($endfilter)) { + if ($timestamp > $endfilter) { + $match = 0; + } + } + unless (@senders < 1) { + unless (grep/^$uname:$udom$/,@senders) { + $match = 0; + } + } + if ($match == 1) { + $qresult.=$key.'='.$value.'&'; + } + } + if (untie(%$hashref)) { + chop($qresult); + &Reply($client, "$qresult\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting dcmaildump\n", $userinput); + } + } else { + &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting dcmaildump\n", $userinput); + } + return 1; +} + +®ister_handler("dcmaildump", \&dump_dcmail_handler, 0, 1, 0); + +# +# Puts domain roles in nohist_domainroles database +# +# Parameters +# $cmd - Command keyword that caused us to be dispatched. +# $tail - Tail of the command. Consists of a colon separated: +# domain - the domain whose roles we are recording +# role - Consists of key=value pair +# where key is unique role +# and value is start/end date information +# $client - Socket open on the client. +# +# Returns: +# 1 - indicating processing should continue. +# Side effects +# reply is written to $client. +# + +sub put_domainroles_handler { + my ($cmd,$tail,$client) = @_; + + my $userinput = "$cmd:$tail"; + my ($udom,$what)=split(/:/,$tail); + chomp($what); + my @pairs=split(/\&/,$what); + my $hashref = &tie_domain_hash($udom, "nohist_domainroles", &GDBM_WRCREAT()); + if ($hashref) { + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + $hashref->{$key}=$value; + } + if (untie(%$hashref)) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting domroleput\n", $userinput); + } + } else { + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting domroleput\n", $userinput); + } + + return 1; +} -register_handler("idget", \&get_id_handler, 0, 1, 0); +®ister_handler("domroleput", \&put_domainroles_handler, 0, 1, 0); # +# Retrieves domain roles from nohist_domainroles database +# Returns to client an & separated list of key=value pairs, +# where key is role and value is start and end date information. +# +# Parameters +# $cmd - Command keyword that caused us to be dispatched. +# $tail - Tail of the command. Consists of a colon separated: +# domain - the domain whose domain roles table we dump +# $client - Socket open on the client. +# +# Returns: +# 1 - indicating processing should continue. +# Side effects +# reply (& separated list of role=start/end info pairs) is +# written to $client. +# +sub dump_domainroles_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + my ($udom,$startfilter,$endfilter,$rolesfilter) = split(/:/,$tail); + chomp($rolesfilter); + my @roles = (); + if (defined($startfilter)) { + $startfilter=&unescape($startfilter); + } else { + $startfilter='.'; + } + if (defined($endfilter)) { + $endfilter=&unescape($endfilter); + } else { + $endfilter='.'; + } + if (defined($rolesfilter)) { + $rolesfilter=&unescape($rolesfilter); + @roles = split(/\&/,$rolesfilter); + } + + my $hashref = &tie_domain_hash($udom, "nohist_domainroles", &GDBM_WRCREAT()); + if ($hashref) { + my $qresult = ''; + while (my ($key,$value) = each(%$hashref)) { + my $match = 1; + my ($start,$end) = split(/:/,&unescape($value)); + my ($trole,$uname,$udom,$runame,$rudom,$rsec) = split(/:/,&unescape($key)); + unless ($startfilter eq '.' || !defined($startfilter)) { + if ($start >= $startfilter) { + $match = 0; + } + } + unless ($endfilter eq '.' || !defined($endfilter)) { + if ($end <= $endfilter) { + $match = 0; + } + } + unless (@roles < 1) { + unless (grep/^$trole$/,@roles) { + $match = 0; + } + } + if ($match == 1) { + $qresult.=$key.'='.$value.'&'; + } + } + if (untie(%$hashref)) { + chop($qresult); + &Reply($client, "$qresult\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting domrolesdump\n", $userinput); + } + } else { + &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting domrolesdump\n", $userinput); + } + return 1; +} + +®ister_handler("domrolesdump", \&dump_domainroles_handler, 0, 1, 0); + + # Process the tmpput command I'm not sure what this does.. Seems to # create a file in the lonDaemons/tmp directory of the form $id.tmp # where Id is the client's ip concatenated with a sequence number. @@ -3408,6 +3804,7 @@ sub tmp_put_handler { } ®ister_handler("tmpput", \&tmp_put_handler, 0, 1, 0); + # Processes the tmpget command. This command returns the contents # of a temporary resource file(?) created via tmpput. # @@ -3420,7 +3817,6 @@ sub tmp_put_handler { # 1 - Inidcating processing can continue. # Side effects: # A reply is sent to the client. - # sub tmp_get_handler { my ($cmd, $id, $client) = @_; @@ -3443,6 +3839,7 @@ sub tmp_get_handler { return 1; } ®ister_handler("tmpget", \&tmp_get_handler, 0, 1, 0); + # # Process the tmpdel command. This command deletes a temp resource # created by the tmpput command. @@ -3476,6 +3873,7 @@ sub tmp_del_handler { } ®ister_handler("tmpdel", \&tmp_del_handler, 0, 1, 0); + # # Processes the setannounce command. This command # creates a file named announce.txt in the top directory of @@ -3514,6 +3912,7 @@ sub set_announce_handler { return 1; } ®ister_handler("setannounce", \&set_announce_handler, 0, 1, 0); + # # Return the version of the daemon. This can be used to determine # the compatibility of cross version installations or, alternatively to @@ -3538,6 +3937,7 @@ sub get_version_handler { return 1; } ®ister_handler("version", \&get_version_handler, 0, 1, 0); + # Set the current host and domain. This is used to support # multihomed systems. Each IP of the system, or even separate daemons # on the same IP can be treated as handling a separate lonCAPA virtual @@ -3674,6 +4074,7 @@ sub validate_course_owner_handler { return 1; } ®ister_handler("autonewcourse", \&validate_course_owner_handler, 0, 1, 0); + # # Validate a course section in the official schedule of classes # from the institutions point of view (part of autoenrollment). @@ -3754,7 +4155,6 @@ sub create_auto_enroll_password_handler # # Returns: # 1 - Continue processing. - sub retrieve_auto_file_handler { my ($cmd, $tail, $client) = @_; my $userinput = "cmd:$tail"; @@ -3839,20 +4239,67 @@ sub get_institutional_code_format_handle return 1; } +®ister_handler("autoinstcodeformat", + \&get_institutional_code_format_handler,0,1,0); -®ister_handler("autoinstcodeformat", \&get_institutional_code_format_handler, - 0,1,0); - -# -# -# -# # +# Gets a student's photo to exist (in the correct image type) in the user's +# directory. +# Formal Parameters: +# $cmd - The command request that got us dispatched. +# $tail - A colon separated set of words that will be split into: +# $domain - student's domain +# $uname - student username +# $type - image type desired +# $client - The socket open on the client. +# Returns: +# 1 - continue processing. +sub student_photo_handler { + my ($cmd, $tail, $client) = @_; + my ($domain,$uname,$type) = split(/:/, $tail); + + my $path=&propath($domain,$uname). + '/userfiles/internal/studentphoto.'.$type; + if (-e $path) { + &Reply($client,"ok\n","$cmd:$tail"); + return 1; + } + &mkpath($path); + my $file=&localstudentphoto::fetch($domain,$uname); + if (!$file) { + &Failure($client,"unavailable\n","$cmd:$tail"); + return 1; + } + if (!-e $path) { &convert_photo($file,$path); } + if (-e $path) { + &Reply($client,"ok\n","$cmd:$tail"); + return 1; + } + &Failure($client,"unable_to_convert\n","$cmd:$tail"); + return 1; +} +®ister_handler("studentphoto", \&student_photo_handler, 0, 1, 0); + +# mkpath makes all directories for a file, expects an absolute path with a +# file or a trailing / if just a dir is passed +# returns 1 on success 0 on failure +sub mkpath { + my ($file)=@_; + my @parts=split(/\//,$file,-1); + my $now=$parts[0].'/'.$parts[1].'/'.$parts[2]; + for (my $i=3;$i<= ($#parts-1);$i++) { + $now.='/'.$parts[$i]; + if (!-e $now) { + if (!mkdir($now,0770)) { return 0; } + } + } + return 1; +} + #--------------------------------------------------------------- # # Getting, decoding and dispatching requests: # - # # Get a Request: # Gets a Request message from the client. The transaction @@ -3959,114 +4406,7 @@ sub process_request { } -#------------------- Commands not yet in spearate handlers. -------------- - -#------------------------------- is auto-enrollment enabled? - if ($userinput =~/^autorun/) { - if (isClient) { - my ($cmd,$cdom) = split(/:/,$userinput); - my $outcome = &localenroll::run($cdom); - print $client "$outcome\n"; - } else { - print $client "0\n"; - } -#------------------------------- get official sections (for auto-enrollment). - } elsif ($userinput =~/^autogetsections/) { - if (isClient) { - my ($cmd,$coursecode,$cdom)=split(/:/,$userinput); - my @secs = &localenroll::get_sections($coursecode,$cdom); - my $seclist = &escape(join(':',@secs)); - print $client "$seclist\n"; - } else { - print $client "refused\n"; - } -#----------------------- validate owner of new course section (for auto-enrollment). - } elsif ($userinput =~/^autonewcourse/) { - if (isClient) { - my ($cmd,$inst_course_id,$owner,$cdom)=split(/:/,$userinput); - my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom); - print $client "$outcome\n"; - } else { - print $client "refused\n"; - } -#-------------- validate course section in schedule of classes (for auto-enrollment). - } elsif ($userinput =~/^autovalidatecourse/) { - if (isClient) { - my ($cmd,$inst_course_id,$cdom)=split(/:/,$userinput); - my $outcome=&localenroll::validate_courseID($inst_course_id,$cdom); - print $client "$outcome\n"; - } else { - print $client "refused\n"; - } -#--------------------------- create password for new user (for auto-enrollment). - } elsif ($userinput =~/^autocreatepassword/) { - if (isClient) { - my ($cmd,$authparam,$cdom)=split(/:/,$userinput); - my ($create_passwd,$authchk); - ($authparam,$create_passwd,$authchk) = &localenroll::create_password($authparam,$cdom); - print $client &escape($authparam.':'.$create_passwd.':'.$authchk)."\n"; - } else { - print $client "refused\n"; - } -#--------------------------- read and remove temporary files (for auto-enrollment). - } elsif ($userinput =~/^autoretrieve/) { - if (isClient) { - my ($cmd,$filename) = split(/:/,$userinput); - my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename; - if ( (-e $source) && ($filename ne '') ) { - my $reply = ''; - if (open(my $fh,$source)) { - while (<$fh>) { - chomp($_); - $_ =~ s/^\s+//g; - $_ =~ s/\s+$//g; - $reply .= $_; - } - close($fh); - print $client &escape($reply)."\n"; -# unlink($source); - } else { - print $client "error\n"; - } - } else { - print $client "error\n"; - } - } else { - print $client "refused\n"; - } -#--------------------- read and retrieve institutional code format -# (for support form). - } elsif ($userinput =~/^autoinstcodeformat/) { - if (isClient) { - my $reply; - my($cmd,$cdom,$course) = split(/:/,$userinput); - my @pairs = split/\&/,$course; - my %instcodes = (); - my %codes = (); - my @codetitles = (); - my %cat_titles = (); - my %cat_order = (); - foreach (@pairs) { - my ($key,$value) = split/=/,$_; - $instcodes{&unescape($key)} = &unescape($value); - } - my $formatreply = &localenroll::instcode_format($cdom,\%instcodes,\%codes,\@codetitles,\%cat_titles,\%cat_order); - if ($formatreply eq 'ok') { - my $codes_str = &hash2str(%codes); - my $codetitles_str = &array2str(@codetitles); - my $cat_titles_str = &hash2str(%cat_titles); - my $cat_order_str = &hash2str(%cat_order); - print $client $codes_str.':'.$codetitles_str.':'.$cat_titles_str.':'.$cat_order_str."\n"; - } - } else { - print $client "refused\n"; - } -# ------------------------------------------------------------- unknown command - - } else { - # unknown command - print $client "unknown_cmd\n"; - } + print $client "unknown_cmd\n"; # -------------------------------------------------------------------- complete Debug("process_request - returning 1"); return 1; @@ -4327,13 +4667,26 @@ sub ReadHostTable { open (CONFIG,"$perlvar{'lonTabDir'}/hosts.tab") || die "Can't read host file"; my $myloncapaname = $perlvar{'lonHostID'}; Debug("My loncapa name is : $myloncapaname"); + my %name_to_ip; while (my $configline=) { - if (!($configline =~ /^\s*\#/)) { - my ($id,$domain,$role,$name,$ip)=split(/:/,$configline); - chomp($ip); $ip=~s/\D+$//; + if ($configline !~ /^\s*\#/ && $configline !~ /^\s*$/ ) { + my ($id,$domain,$role,$name)=split(/:/,$configline); + $name=~s/\s//g; + my $ip; + if (!exists($name_to_ip{$name})) { + $ip = gethostbyname($name); + if (!$ip || length($ip) ne 4) { + &logthis("Skipping host $id name $name no IP found\n"); + next; + } + $ip=inet_ntoa($ip); + $name_to_ip{$name} = $ip; + } else { + $ip = $name_to_ip{$name}; + } $hostid{$ip}=$id; # LonCAPA name of host by IP. $hostdom{$id}=$domain; # LonCAPA domain name of host. - $hostip{$id}=$ip; # IP address of host. + $hostip{$id}=$ip; # IP address of host. $hostdns{$name} = $id; # LonCAPA name of host by DNS. if ($id eq $perlvar{'lonHostID'}) { @@ -4470,8 +4823,6 @@ sub Reply { Debug("Request was $request Reply was $reply"); $Transactions++; - - } @@ -4514,7 +4865,7 @@ sub logstatus { flock(LOG,LOCK_EX); print LOG $$."\t".$clientname."\t".$currenthostid."\t" .$status."\t".$lastlog."\t $keymode\n"; - flock(DB,LOCK_UN); + flock(LOG,LOCK_UN); close(LOG); } &status("Finished logging"); @@ -4699,6 +5050,8 @@ $SIG{USR2} = \&UpdateHosts; ReadHostTable; +my $dist=`$perlvar{'lonDaemons'}/distprobe`; + # -------------------------------------------------------------- # Accept connections. When a connection comes in, it is validated # and if good, a child process is created to process transactions @@ -4745,8 +5098,6 @@ sub make_new_child { if (defined($iaddr)) { $clientip = inet_ntoa($iaddr); Debug("Connected with $clientip"); - $clientdns = gethostbyaddr($iaddr, AF_INET); - Debug("Connected with $clientdns by name"); } else { &logthis("Unable to determine clientip"); $clientip='Unavailable'; @@ -4776,7 +5127,9 @@ sub make_new_child { # my $tmpsnum=0; # Now global #---------------------------------------------------- kerberos 5 initialization &Authen::Krb5::init_context(); - &Authen::Krb5::init_ets(); + unless (($dist eq 'fedora4') || ($dist eq 'suse9.3')) { + &Authen::Krb5::init_ets(); + } &status('Accepted connection'); # ============================================================================= @@ -4786,18 +5139,23 @@ sub make_new_child { ReadManagerTable; # May also be a manager!! - my $clientrec=($hostid{$clientip} ne undef); - my $ismanager=($managers{$clientip} ne undef); + my $outsideip=$clientip; + if ($clientip eq '127.0.0.1') { + $outsideip=$hostip{$perlvar{'lonHostID'}}; + } + + my $clientrec=($hostid{$outsideip} ne undef); + my $ismanager=($managers{$outsideip} ne undef); $clientname = "[unknonwn]"; if($clientrec) { # Establish client type. $ConnectionType = "client"; - $clientname = $hostid{$clientip}; + $clientname = $hostid{$outsideip}; if($ismanager) { $ConnectionType = "both"; } } else { $ConnectionType = "manager"; - $clientname = $managers{$clientip}; + $clientname = $managers{$outsideip}; } my $clientok; @@ -4981,16 +5339,13 @@ sub is_author { # user - Name of the user for which the role is being put. # authtype - The authentication type associated with the user. # -sub manage_permissions -{ - - +sub manage_permissions { my ($request, $domain, $user, $authtype) = @_; &Debug("manage_permissions: $request $domain $user $authtype"); # See if the request is of the form /$domain/_au - if($request =~ /^(\/$domain\/_au)$/) { # It's an author rolesput... + if($request =~ /^(\/\Q$domain\E\/_au)$/) { # It's an author rolesput... my $execdir = $perlvar{'lonDaemons'}; my $userhome= "/home/$user" ; &logthis("system $execdir/lchtmldir $userhome $user $authtype"); @@ -5010,12 +5365,7 @@ sub manage_permissions # sub password_path { my ($domain, $user) = @_; - - - my $path = &propath($domain, $user); - $path .= "/passwd"; - - return $path; + return &propath($domain, $user).'/passwd'; } # Password Filename @@ -5188,7 +5538,7 @@ sub validate_user { my $krbserver = &Authen::Krb5::parse_name($krbservice); my $credentials= &Authen::Krb5::cc_default(); $credentials->initialize($krbclient); - my $krbreturn = &Authen::KRb5::get_in_tkt_with_password($krbclient, + my $krbreturn = &Authen::Krb5::get_in_tkt_with_password($krbclient, $krbserver, $password, $credentials); @@ -5388,7 +5738,7 @@ sub thisversion { sub subscribe { my ($userinput,$clientip)=@_; my $result; - my ($cmd,$fname)=split(/:/,$userinput); + my ($cmd,$fname)=split(/:/,$userinput,2); my $ownership=&ishome($fname); if ($ownership eq 'owner') { # explitly asking for the current version? @@ -5432,6 +5782,35 @@ sub subscribe { } return $result; } +# Change the passwd of a unix user. The caller must have +# first verified that the user is a loncapa user. +# +# Parameters: +# user - Unix user name to change. +# pass - New password for the user. +# Returns: +# ok - if success +# other - Some meaningfule error message string. +# NOTE: +# invokes a setuid script to change the passwd. +sub change_unix_password { + my ($user, $pass) = @_; + + &Debug("change_unix_password"); + my $execdir=$perlvar{'lonDaemons'}; + &Debug("Opening lcpasswd pipeline"); + my $pf = IO::File->new("|$execdir/lcpasswd > " + ."$perlvar{'lonDaemons'}" + ."/logs/lcpasswd.log"); + print $pf "$user\n$pass\n$pass\n"; + close $pf; + my $err = $?; + return ($err < @passwderrors) ? $passwderrors[$err] : + "pwchange_falure - unknown error"; + + +} + sub make_passwd_file { my ($uname, $umode,$npass,$passfilename)=@_; @@ -5491,24 +5870,30 @@ sub make_passwd_file { print $se "$npass\n"; print $se "$lc_error_file\n"; # Status -> unique file. } - my $error = IO::File->new("< $lc_error_file"); - my $useraddok = <$error>; - $error->close; - unlink($lc_error_file); - - chomp $useraddok; - - if($useraddok > 0) { - my $error_text = &lcuseraddstrerror($useraddok); - &logthis("Failed lcuseradd: $error_text"); - $result = "lcuseradd_failed:$error_text\n"; - } else { - my $pf = IO::File->new(">$passfilename"); - if($pf) { - print $pf "unix:\n"; - } else { - $result = "pass_file_failed_error"; + if (-r $lc_error_file) { + &Debug("Opening error file: $lc_error_file"); + my $error = IO::File->new("< $lc_error_file"); + my $useraddok = <$error>; + $error->close; + unlink($lc_error_file); + + chomp $useraddok; + + if($useraddok > 0) { + my $error_text = &lcuseraddstrerror($useraddok); + &logthis("Failed lcuseradd: $error_text"); + $result = "lcuseradd_failed:$error_text\n"; + } else { + my $pf = IO::File->new(">$passfilename"); + if($pf) { + print $pf "unix:\n"; + } else { + $result = "pass_file_failed_error"; + } } + } else { + &Debug("Could not locate lcuseradd error: $lc_error_file"); + $result="bug_lcuseradd_no_output_file"; } } } elsif ($umode eq 'none') { @@ -5526,6 +5911,11 @@ sub make_passwd_file { return $result; } +sub convert_photo { + my ($start,$dest)=@_; + system("convert $start $dest"); +} + sub sethost { my ($remotereq) = @_; my (undef,$hostid)=split(/:/,$remotereq);