--- loncom/lond 2009/10/08 19:54:26 1.428 +++ loncom/lond 2023/01/23 03:43:33 1.489.2.43.2.6 @@ -2,7 +2,7 @@ # The LearningOnline Network # lond "LON Daemon" Server (port "LOND" 5663) # -# $Id: lond,v 1.428 2009/10/08 19:54:26 raeburn Exp $ +# $Id: lond,v 1.489.2.43.2.6 2023/01/23 03:43:33 raeburn Exp $ # # Copyright Michigan State University Board of Trustees # @@ -33,6 +33,7 @@ use strict; use lib '/home/httpd/lib/perl/'; use LONCAPA; use LONCAPA::Configuration; +use LONCAPA::Lond; use IO::Socket; use IO::File; @@ -42,7 +43,6 @@ use Crypt::IDEA; use LWP::UserAgent(); use Digest::MD5 qw(md5_hex); use GDBM_File; -use Authen::Krb4; use Authen::Krb5; use localauth; use localenroll; @@ -53,13 +53,17 @@ use LONCAPA::lonlocal; use LONCAPA::lonssl; use Fcntl qw(:flock); use Apache::lonnet; +use Mail::Send; +use Crypt::Eksblowfish::Bcrypt; +use Digest::SHA; +use Encode; my $DEBUG = 0; # Non zero to enable debug log entries. my $status=''; my $lastlog=''; -my $VERSION='$Revision: 1.428 $'; #' stupid emacs +my $VERSION='$Revision: 1.489.2.43.2.6 $'; #' stupid emacs my $remoteVERSION; my $currenthostid="default"; my $currentdomainid; @@ -67,6 +71,9 @@ my $currentdomainid; my $client; my $clientip; # IP address of client. my $clientname; # LonCAPA name of client. +my $clientversion; # LonCAPA version running on client. +my $clienthomedom; # LonCAPA domain of homeID for client. + # primary library server. my $server; @@ -88,6 +95,8 @@ my %managers; # Ip -> manager names my %perlvar; # Will have the apache conf defined perl vars. +my $dist; + # # The hash below is used for command dispatching, and is therefore keyed on the request keyword. # Each element of the hash contains a reference to an array that contains: @@ -123,32 +132,13 @@ my @passwderrors = ("ok", "pwchange_failure - lcpasswd Error filename is invalid"); -# The array below are lcuseradd error strings.: - -my $lastadderror = 13; -my @adderrors = ("ok", - "User ID mismatch, lcuseradd must run as user www", - "lcuseradd Incorrect number of command line parameters must be 3", - "lcuseradd Incorrect number of stdinput lines, must be 3", - "lcuseradd Too many other simultaneous pwd changes in progress", - "lcuseradd User does not exist", - "lcuseradd Unable to make www member of users's group", - "lcuseradd Unable to su to root", - "lcuseradd Unable to set password", - "lcuseradd Username has invalid characters", - "lcuseradd Password has an invalid character", - "lcuseradd User already exists", - "lcuseradd Could not add user.", - "lcuseradd Password mismatch"); - - # This array are the errors from lcinstallfile: my @installerrors = ("ok", "Initial user id of client not that of www", "Usage error, not enough command line arguments", - "Source file name does not exist", - "Destination file name does not exist", + "Source filename does not exist", + "Destination filename does not exist", "Some file operation failed", "Invalid table filename." ); @@ -417,8 +407,11 @@ sub ReadManagerTable { my $tablename = $perlvar{'lonTabDir'}."/managers.tab"; if (!open (MANAGERS, $tablename)) { - logthis('No manager table. Nobody can manage!!'); - return; + my $hostname = &Apache::lonnet::hostname($perlvar{'lonHostID'}); + if (&Apache::lonnet::is_LC_dns($hostname)) { + &logthis('No manager table. Nobody can manage!!'); + } + return; } while(my $host = ) { chomp($host); @@ -443,7 +436,7 @@ sub ReadManagerTable { } } else { logthis(' existing host'." $host\n"); - $managers{&Apache::lonnet::get_host_ip($host)} = $host; # Use info from cluster tab if clumemeber + $managers{&Apache::lonnet::get_host_ip($host)} = $host; # Use info from cluster tab if cluster memeber } } } @@ -505,7 +498,8 @@ sub AdjustHostContents { my $me = $perlvar{'lonHostID'}; foreach my $line (split(/\n/,$contents)) { - if(!(($line eq "") || ($line =~ /^ *\#/) || ($line =~ /^ *$/))) { + if(!(($line eq "") || ($line =~ /^ *\#/) || ($line =~ /^ *$/) || + ($line =~ /^\s*\^/))) { chomp($line); my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon)=split(/:/,$line); if ($id eq $me) { @@ -593,11 +587,8 @@ sub InstallFile { # # ConfigFileFromSelector: converts a configuration file selector # into a configuration file pathname. -# It's probably no longer necessary to preserve -# special handling of hosts or domain as those -# files have been superceded by dns_hosts, dns_domain. -# The default action is just to prepend the directory -# and append .tab +# Supports the following file selectors: +# hosts, domain, dns_hosts, dns_domain # # # Parameters: @@ -610,15 +601,11 @@ sub ConfigFileFromSelector { my $tablefile; my $tabledir = $perlvar{'lonTabDir'}.'/'; - if ($selector eq "hosts") { - $tablefile = $tabledir."hosts.tab"; - } elsif ($selector eq "domain") { - $tablefile = $tabledir."domain.tab"; - } else { + if (($selector eq "hosts") || ($selector eq "domain") || + ($selector eq "dns_hosts") || ($selector eq "dns_domain")) { $tablefile = $tabledir.$selector.'.tab'; } return $tablefile; - } # # PushFile: Called to do an administrative push of a file. @@ -636,7 +623,7 @@ sub ConfigFileFromSelector { # String to send to client ("ok" or "refused" if bad file). # sub PushFile { - my $request = shift; + my $request = shift; my ($command, $filename, $contents) = split(":", $request, 3); &Debug("PushFile"); @@ -644,6 +631,8 @@ sub PushFile { # supported: # hosts.tab ($filename eq host). # domain.tab ($filename eq domain). + # dns_hosts.tab ($filename eq dns_host). + # dns_domain.tab ($filename eq dns_domain). # Construct the destination filename or reject the request. # # lonManage is supposed to ensure this, however this session could be @@ -664,6 +653,44 @@ sub PushFile { if($filename eq "host") { $contents = AdjustHostContents($contents); + } elsif (($filename eq 'dns_hosts') || ($filename eq 'dns_domain')) { + if ($contents eq '') { + &logthis(' Pushfile: unable to install ' + .$tablefile." - no data received from push. "); + return 'error: push had no data'; + } + if (&Apache::lonnet::get_host_ip($clientname)) { + my $clienthost = &Apache::lonnet::hostname($clientname); + if ($managers{$clientip} eq $clientname) { + my $clientprotocol = $Apache::lonnet::protocol{$clientname}; + $clientprotocol = 'http' if ($clientprotocol ne 'https'); + my $url = '/adm/'.$filename; + $url =~ s{_}{/}; + my $ua=new LWP::UserAgent; + $ua->timeout(60); + my $request=new HTTP::Request('GET',"$clientprotocol://$clienthost$url"); + my $response=$ua->request($request); + if ($response->is_error()) { + &logthis(' Pushfile: unable to install ' + .$tablefile." - error attempting to pull data. "); + return 'error: pull failed'; + } else { + my $result = $response->content; + chomp($result); + unless ($result eq $contents) { + &logthis(' Pushfile: unable to install ' + .$tablefile." - pushed data and pulled data differ. "); + my $pushleng = length($contents); + my $pullleng = length($result); + if ($pushleng != $pullleng) { + return "error: $pushleng vs $pullleng bytes"; + } else { + return "error: mismatch push and pull"; + } + } + } + } + } } # Install the new file: @@ -675,11 +702,31 @@ sub PushFile { return "error:$!"; } else { &logthis(' Installed new '.$tablefile - .""); - + ." - transaction by: $clientname ($clientip)"); + my $adminmail = $perlvar{'lonAdmEMail'}; + my $admindom = &Apache::lonnet::host_domain($perlvar{'lonHostID'}); + if ($admindom ne '') { + my %domconfig = + &Apache::lonnet::get_dom('configuration',['contacts'],$admindom); + if (ref($domconfig{'contacts'}) eq 'HASH') { + if ($domconfig{'contacts'}{'adminemail'} ne '') { + $adminmail = $domconfig{'contacts'}{'adminemail'}; + } + } + } + if ($adminmail =~ /^[^\@]+\@[^\@]+$/) { + my $msg = new Mail::Send; + $msg->to($adminmail); + $msg->subject('LON-CAPA DNS update on '.$perlvar{'lonHostID'}); + $msg->add('Content-type','text/plain; charset=UTF-8'); + if (my $fh = $msg->open()) { + print $fh 'Update to '.$tablefile.' from Cluster Manager '. + "$clientname ($clientip)\n"; + $fh->close; + } + } } - # Indicate success: return "ok"; @@ -975,6 +1022,9 @@ sub read_profile { &GDBM_READER()); if ($hashref) { my @queries=split(/\&/,$what); + if ($namespace eq 'roles') { + @queries = map { &unescape($_); } @queries; + } my $qresult=''; for (my $i=0;$i<=$#queries;$i++) { @@ -1068,7 +1118,7 @@ sub pong_handler { # Implicit Inputs: # $currenthostid - Global variable that carries the name of the host # known as. -# $clientname - Global variable that carries the name of the hsot we're connected to. +# $clientname - Global variable that carries the name of the host we're connected to. # Returns: # 1 - Ok to continue processing. # 0 - Program should exit. @@ -1107,7 +1157,7 @@ sub establish_key_handler { # Implicit Inputs: # $currenthostid - Global variable that carries the name of the host # known as. -# $clientname - Global variable that carries the name of the hsot we're connected to. +# $clientname - Global variable that carries the name of the host we're connected to. # Returns: # 1 - Ok to continue processing. # 0 - Program should exit. @@ -1116,6 +1166,8 @@ sub establish_key_handler { sub load_handler { my ($cmd, $tail, $replyfd) = @_; + + # Get the load average from /proc/loadavg and calculate it as a percentage of # the allowed load limit as set by the perl global variable lonLoadLim @@ -1144,7 +1196,7 @@ sub load_handler { # Implicit Inputs: # $currenthostid - Global variable that carries the name of the host # known as. -# $clientname - Global variable that carries the name of the hsot we're connected to. +# $clientname - Global variable that carries the name of the host we're connected to. # Returns: # 1 - Ok to continue processing. # 0 - Program should exit @@ -1372,6 +1424,22 @@ sub du2_handler { # selected directory the filename followed by the full output of # the stat function is returned. The returned info for each # file are separated by ':'. The stat fields are separated by &'s. +# +# If the requested path contains /../ or is: +# +# 1. for a directory, and the path does not begin with one of: +# (a) /home/httpd/html/res/ +# (b) /home/httpd/html/userfiles/ +# (c) /home/httpd/lonUsers//<1>/<2>/<3>//userfiles +# or is: +# +# 2. for a file, and the path (after prepending) does not begin with one of: +# (a) /home/httpd/lonUsers//<1>/<2>/<3>// +# (b) /home/httpd/html/res/// +# (c) /home/httpd/html/userfiles/// +# +# the response will be "refused". +# # Parameters: # $cmd - The command that dispatched us (ls). # $ulsdir - The directory path to list... I'm not sure what this @@ -1393,8 +1461,17 @@ sub ls_handler { my $rights; my $ulsout=''; my $ulsfn; + if ($ulsdir =~m{/\.\./}) { + &Failure($client,"refused\n",$userinput); + return 1; + } if (-e $ulsdir) { if(-d $ulsdir) { + unless (($ulsdir =~ m{^/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) || + ($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/userfiles})) { + &Failure($client,"refused\n",$userinput); + return 1; + } if (opendir(LSDIR,$ulsdir)) { while ($ulsfn=readdir(LSDIR)) { undef($obs); @@ -1418,6 +1495,11 @@ sub ls_handler { closedir(LSDIR); } } else { + unless (($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/}) || + ($ulsdir =~ m{^/home/httpd/html/(?:res|userfiles)/$LONCAPA::match_domain/$LONCAPA::match_name/})) { + &Failure($client,"refused\n",$userinput); + return 1; + } my @ulsstats=stat($ulsdir); $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':'; } @@ -1442,6 +1524,22 @@ sub ls_handler { # selected directory the filename followed by the full output of # the stat function is returned. The returned info for each # file are separated by ':'. The stat fields are separated by &'s. +# +# If the requested path contains /../ or is: +# +# 1. for a directory, and the path does not begin with one of: +# (a) /home/httpd/html/res/ +# (b) /home/httpd/html/userfiles/ +# (c) /home/httpd/lonUsers//<1>/<2>/<3>//userfiles +# or is: +# +# 2. for a file, and the path (after prepending) does not begin with one of: +# (a) /home/httpd/lonUsers//<1>/<2>/<3>// +# (b) /home/httpd/html/res/// +# (c) /home/httpd/html/userfiles/// +# +# the response will be "refused". +# # Parameters: # $cmd - The command that dispatched us (ls). # $ulsdir - The directory path to list... I'm not sure what this @@ -1462,8 +1560,17 @@ sub ls2_handler { my $rights; my $ulsout=''; my $ulsfn; + if ($ulsdir =~m{/\.\./}) { + &Failure($client,"refused\n",$userinput); + return 1; + } if (-e $ulsdir) { if(-d $ulsdir) { + unless (($ulsdir =~ m{^/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) || + ($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/userfiles})) { + &Failure($client,"refused\n","$userinput"); + return 1; + } if (opendir(LSDIR,$ulsdir)) { while ($ulsfn=readdir(LSDIR)) { undef($obs); @@ -1488,6 +1595,11 @@ sub ls2_handler { closedir(LSDIR); } } else { + unless (($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/}) || + ($ulsdir =~ m{^/home/httpd/html/(?:res|userfiles)/$LONCAPA::match_domain/$LONCAPA::match_name/})) { + &Failure($client,"refused\n",$userinput); + return 1; + } my @ulsstats=stat($ulsdir); $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':'; } @@ -1504,6 +1616,25 @@ sub ls2_handler { # selected directory the filename followed by the full output of # the stat function is returned. The returned info for each # file are separated by ':'. The stat fields are separated by &'s. +# +# If the requested path (after prepending) contains /../ or is: +# +# 1. for a directory, and the path does not begin with one of: +# (a) /home/httpd/html/res/ +# (b) /home/httpd/html/userfiles/ +# (c) /home/httpd/lonUsers//<1>/<2>/<3>//userfiles +# (d) /home/httpd/html/priv/ and client is the homeserver +# +# or is: +# +# 2. for a file, and the path (after prepending) does not begin with one of: +# (a) /home/httpd/lonUsers//<1>/<2>/<3>// +# (b) /home/httpd/html/res/// +# (c) /home/httpd/html/userfiles/// +# (d) /home/httpd/html/priv/// and client is the homeserver +# +# the response will be "refused". +# # Parameters: # $cmd - The command that dispatched us (ls). # $tail - The tail of the request that invoked us. @@ -1543,22 +1674,12 @@ sub ls3_handler { } my $dir_root = $perlvar{'lonDocRoot'}; - if ($getpropath) { + if (($getpropath) || ($getuserdir)) { if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) { $dir_root = &propath($udom,$uname); $dir_root =~ s/\/$//; } else { - &Failure($client,"refused\n","$cmd:$tail"); - return 1; - } - } elsif ($getuserdir) { - if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) { - my $subdir=$uname.'__'; - $subdir =~ s/(.)(.)(.).*/$1\/$2\/$3/; - $dir_root = $Apache::lonnet::perlvar{'lonUsersDir'} - ."/$udom/$subdir/$uname"; - } else { - &Failure($client,"refused\n","$cmd:$tail"); + &Failure($client,"refused\n",$userinput); return 1; } } elsif ($alternate_root ne '') { @@ -1571,12 +1692,28 @@ sub ls3_handler { $ulsdir = $dir_root.'/'.$ulsdir; } } + if ($ulsdir =~m{/\.\./}) { + &Failure($client,"refused\n",$userinput); + return 1; + } + my $islocal; + my @machine_ids = &Apache::lonnet::current_machine_ids(); + if (grep(/^\Q$clientname\E$/,@machine_ids)) { + $islocal = 1; + } my $obs; my $rights; my $ulsout=''; my $ulsfn; if (-e $ulsdir) { if(-d $ulsdir) { + unless (($getpropath) || ($getuserdir) || + ($ulsdir =~ m{^/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) || + ($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/userfiles}) || + (($ulsdir =~ m{^/home/httpd/html/priv/$LONCAPA::match_domain}) && ($islocal))) { + &Failure($client,"refused\n",$userinput); + return 1; + } if (opendir(LSDIR,$ulsdir)) { while ($ulsfn=readdir(LSDIR)) { undef($obs); @@ -1601,6 +1738,13 @@ sub ls3_handler { closedir(LSDIR); } } else { + unless (($getpropath) || ($getuserdir) || + ($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/}) || + ($ulsdir =~ m{^/home/httpd/html/(?:res|userfiles)/$LONCAPA::match_domain/$LONCAPA::match_name/}) || + (($ulsdir =~ m{^/home/httpd/html/priv/$LONCAPA::match_domain/$LONCAPA::match_name/}) && ($islocal))) { + &Failure($client,"refused\n",$userinput); + return 1; + } my @ulsstats=stat($ulsdir); $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':'; } @@ -1613,6 +1757,80 @@ sub ls3_handler { } ®ister_handler("ls3", \&ls3_handler, 0, 1, 0); +sub read_lonnet_global { + my ($cmd,$tail,$client) = @_; + my $userinput = "$cmd:$tail"; + my $requested = &Apache::lonnet::thaw_unescape($tail); + my $result; + my %packagevars = ( + spareid => \%Apache::lonnet::spareid, + perlvar => \%Apache::lonnet::perlvar, + ); + my %limit_to = ( + perlvar => { + lonOtherAuthen => 1, + lonBalancer => 1, + lonVersion => 1, + lonSysEMail => 1, + lonHostID => 1, + lonRole => 1, + lonDefDomain => 1, + lonLoadLim => 1, + lonUserLoadLim => 1, + } + ); + if (ref($requested) eq 'HASH') { + foreach my $what (keys(%{$requested})) { + my $response; + my $items = {}; + if (exists($packagevars{$what})) { + if (ref($limit_to{$what}) eq 'HASH') { + foreach my $varname (keys(%{$packagevars{$what}})) { + if ($limit_to{$what}{$varname}) { + $items->{$varname} = $packagevars{$what}{$varname}; + } + } + } else { + $items = $packagevars{$what}; + } + if ($what eq 'perlvar') { + if (!exists($packagevars{$what}{'lonBalancer'})) { + if ($dist =~ /^(centos|rhes|fedora|scientific|oracle|rocky|alma)/) { + my $othervarref=LONCAPA::Configuration::read_conf('httpd.conf'); + if (ref($othervarref) eq 'HASH') { + $items->{'lonBalancer'} = $othervarref->{'lonBalancer'}; + } + } + } + } + $response = &Apache::lonnet::freeze_escape($items); + } + $result .= &escape($what).'='.$response.'&'; + } + } + $result =~ s/\&$//; + &Reply($client,\$result,$userinput); + return 1; +} +®ister_handler("readlonnetglobal", \&read_lonnet_global, 0, 1, 0); + +sub server_devalidatecache_handler { + my ($cmd,$tail,$client) = @_; + my $userinput = "$cmd:$tail"; + my $items = &unescape($tail); + my @cached = split(/\&/,$items); + foreach my $key (@cached) { + if ($key =~ /:/) { + my ($name,$id) = map { &unescape($_); } split(/:/,$key); + &Apache::lonnet::devalidate_cache_new($name,$id); + } + } + my $result = 'ok'; + &Reply($client,\$result,$userinput); + return 1; +} +®ister_handler("devalidatecache", \&server_devalidatecache_handler, 0, 1, 0); + sub server_timezone_handler { my ($cmd,$tail,$client) = @_; my $userinput = "$cmd:$tail"; @@ -1653,6 +1871,23 @@ sub server_loncaparev_handler { } ®ister_handler("serverloncaparev", \&server_loncaparev_handler, 0, 1, 0); +sub server_homeID_handler { + my ($cmd,$tail,$client) = @_; + my $userinput = "$cmd:$tail"; + &Reply($client,\$perlvar{'lonHostID'},$userinput); + return 1; +} +®ister_handler("serverhomeID", \&server_homeID_handler, 0, 1, 0); + +sub server_distarch_handler { + my ($cmd,$tail,$client) = @_; + my $userinput = "$cmd:$tail"; + my $reply = &distro_and_arch(); + &Reply($client,\$reply,$userinput); + return 1; +} +®ister_handler("serverdistarch", \&server_distarch_handler, 0, 1, 0); + # Process a reinit request. Reinit requests that either # lonc or lond be reinitialized so that an updated # host.tab or domain.tab can be processed. @@ -1762,15 +1997,49 @@ sub authenticate_handler { # upass - User's password. # checkdefauth - Pass to validate_user() to try authentication # with default auth type(s) if no user account. + # clientcancheckhost - Passed by clients with functionality in lonauth.pm + # to check if session can be hosted. - my ($udom, $uname, $upass, $checkdefauth)=split(/:/,$tail); + my ($udom, $uname, $upass, $checkdefauth, $clientcancheckhost)=split(/:/,$tail); &Debug(" Authenticate domain = $udom, user = $uname, password = $upass, checkdefauth = $checkdefauth"); chomp($upass); $upass=&unescape($upass); my $pwdcorrect = &validate_user($udom,$uname,$upass,$checkdefauth); if($pwdcorrect) { - &Reply( $client, "authorized\n", $userinput); + my $canhost = 1; + unless ($clientcancheckhost) { + my $uprimary_id = &Apache::lonnet::domain($udom,'primary'); + my $uint_dom = &Apache::lonnet::internet_dom($uprimary_id); + my @intdoms; + my $internet_names = &Apache::lonnet::get_internet_names($clientname); + if (ref($internet_names) eq 'ARRAY') { + @intdoms = @{$internet_names}; + } + unless ($uint_dom ne '' && grep(/^\Q$uint_dom\E$/,@intdoms)) { + my ($remote,$hosted); + my $remotesession = &get_usersession_config($udom,'remotesession'); + if (ref($remotesession) eq 'HASH') { + $remote = $remotesession->{'remote'}; + } + my $hostedsession = &get_usersession_config($clienthomedom,'hostedsession'); + if (ref($hostedsession) eq 'HASH') { + $hosted = $hostedsession->{'hosted'}; + } + my $loncaparev = $clientversion; + if ($loncaparev eq '') { + $loncaparev = $Apache::lonnet::loncaparevs{$clientname}; + } + $canhost = &Apache::lonnet::can_host_session($udom,$clientname, + $loncaparev, + $remote,$hosted); + } + } + if ($canhost) { + &Reply( $client, "authorized\n", $userinput); + } else { + &Reply( $client, "not_allowed_to_host\n", $userinput); + } # # Bad credentials: Failed to authorize # @@ -1838,19 +2107,90 @@ sub change_password_handler { } if($validated) { my $realpasswd = &get_auth_type($udom, $uname); # Defined since authd. - my ($howpwd,$contentpwd)=split(/:/,$realpasswd); + my $notunique; if ($howpwd eq 'internal') { &Debug("internal auth"); - my $salt=time; - $salt=substr($salt,6,2); - my $ncpass=crypt($npass,$salt); - if(&rewrite_password_file($udom, $uname, "internal:$ncpass")) { + my $ncpass = &hash_passwd($udom,$npass); + my (undef,$method,@rest) = split(/!/,$contentpwd); + if ($method eq 'bcrypt') { + my %passwdconf = &Apache::lonnet::get_passwdconf($udom); + if (($passwdconf{'numsaved'}) && ($passwdconf{'numsaved'} =~ /^\d+$/)) { + my @oldpasswds; + my $userpath = &propath($udom,$uname); + my $fullpath = $userpath.'/oldpasswds'; + if (-d $userpath) { + my @oldfiles; + if (-e $fullpath) { + if (opendir(my $dir,$fullpath)) { + (@oldfiles) = grep(/^\d+$/,readdir($dir)); + closedir($dir); + } + if (@oldfiles) { + @oldfiles = sort { $b <=> $a } (@oldfiles); + my $numremoved = 0; + for (my $i=0; $i<@oldfiles; $i++) { + if ($i>=$passwdconf{'numsaved'}) { + if (-f "$fullpath/$oldfiles[$i]") { + if (unlink("$fullpath/$oldfiles[$i]")) { + $numremoved ++; + } + } + } elsif (open(my $fh,'<',"$fullpath/$oldfiles[$i]")) { + while (my $line = <$fh>) { + push(@oldpasswds,$line); + } + close($fh); + } + } + if ($numremoved) { + &logthis("unlinked $numremoved old password files for $uname:$udom"); + } + } + } + push(@oldpasswds,$contentpwd); + foreach my $item (@oldpasswds) { + my (undef,$method,@rest) = split(/!/,$item); + if ($method eq 'bcrypt') { + my $result = &hash_passwd($udom,$npass,@rest); + if ($result eq $item) { + $notunique = 1; + last; + } + } + } + unless ($notunique) { + unless (-e $fullpath) { + if (&mkpath("$fullpath/")) { + chmod(0700,$fullpath); + } + } + if (-d $fullpath) { + my $now = time; + if (open(my $fh,'>',"$fullpath/$now")) { + print $fh $contentpwd; + close($fh); + chmod(0400,"$fullpath/$now"); + } + } + } + } + } + } + if ($notunique) { + my $msg="Result of password change for $uname:$udom - password matches one used before"; + if ($lonhost) { + $msg .= " - request originated from: $lonhost"; + } + &logthis($msg); + &Reply($client, "prioruse\n", $userinput); + } elsif (&rewrite_password_file($udom, $uname, "internal:$ncpass")) { my $msg="Result of password change for $uname: pwchange_success"; if ($lonhost) { $msg .= " - request originated from: $lonhost"; } &logthis($msg); + &update_passwd_history($uname,$udom,$howpwd,$context); &Reply($client, "ok\n", $userinput); } else { &logthis("Unable to open $uname passwd " @@ -1859,6 +2199,9 @@ sub change_password_handler { } } elsif ($howpwd eq 'unix' && $context ne 'reset_by_email') { my $result = &change_unix_password($uname, $npass); + if ($result eq 'ok') { + &update_passwd_history($uname,$udom,$howpwd,$context); + } &logthis("Result of password change for $uname: ". $result); &Reply($client, \$result, $userinput); @@ -1869,7 +2212,6 @@ sub change_password_handler { # &Failure( $client, "auth_mode_error\n", $userinput); } - } else { if ($failure eq '') { $failure = 'non_authorized'; @@ -1881,6 +2223,38 @@ sub change_password_handler { } ®ister_handler("passwd", \&change_password_handler, 1, 1, 0); +sub hash_passwd { + my ($domain,$plainpass,@rest) = @_; + my ($salt,$cost); + if (@rest) { + $cost = $rest[0]; + # salt is first 22 characters, base-64 encoded by bcrypt + my $plainsalt = substr($rest[1],0,22); + $salt = Crypt::Eksblowfish::Bcrypt::de_base64($plainsalt); + } else { + my %domdefaults = &Apache::lonnet::get_domain_defaults($domain); + my $defaultcost = $domdefaults{'intauth_cost'}; + if (($defaultcost eq '') || ($defaultcost =~ /D/)) { + $cost = 10; + } else { + $cost = $defaultcost; + } + # Generate random 16-octet base64 salt + $salt = ""; + $salt .= pack("C", int rand(256)) for 1..16; + } + my $hash = &Crypt::Eksblowfish::Bcrypt::bcrypt_hash({ + key_nul => 1, + cost => $cost, + salt => $salt, + }, Digest::SHA::sha512(Encode::encode('UTF-8',$plainpass))); + + my $result = join("!", "", "bcrypt", sprintf("%02d",$cost), + &Crypt::Eksblowfish::Bcrypt::en_base64($salt). + &Crypt::Eksblowfish::Bcrypt::en_base64($hash)); + return $result; +} + # # Create a new user. User in this case means a lon-capa user. # The user must either already exist in some authentication realm @@ -1924,7 +2298,8 @@ sub add_user_handler { ."makeuser"; } unless ($fperror) { - my $result=&make_passwd_file($uname, $umode,$npass, $passfilename); + my $result=&make_passwd_file($uname,$udom,$umode,$npass, + $passfilename,'makeuser'); &Reply($client,\$result, $userinput); #BUGBUG - could be fail } else { &Failure($client, \$fperror, $userinput); @@ -1985,36 +2360,30 @@ sub change_authentication_handler { my $passfilename = &password_path($udom, $uname); if ($passfilename) { # Not allowed to create a new user!! # If just changing the unix passwd. need to arrange to run - # passwd since otherwise make_passwd_file will run - # lcuseradd which fails if an account already exists - # (to prevent an unscrupulous LONCAPA admin from stealing - # an existing account by overwriting it as a LonCAPA account). + # passwd since otherwise make_passwd_file will fail as + # creation of unix authenticated users is no longer supported + # except from the command line, when running make_domain_coordinator.pl if(($oldauth =~/^unix/) && ($umode eq "unix")) { my $result = &change_unix_password($uname, $npass); &logthis("Result of password change for $uname: ".$result); if ($result eq "ok") { + &update_passwd_history($uname,$udom,$umode,'changeuserauth'); &Reply($client, \$result); } else { &Failure($client, \$result); } } else { - my $result=&make_passwd_file($uname, $umode,$npass,$passfilename); + my $result=&make_passwd_file($uname,$udom,$umode,$npass, + $passfilename,'changeuserauth'); # # If the current auth mode is internal, and the old auth mode was # unix, or krb*, and the user is an author for this domain, # re-run manage_permissions for that role in order to be able # to take ownership of the construction space back to www:www # - - - if( (($oldauth =~ /^unix/) && ($umode eq "internal")) || - (($oldauth =~ /^internal/) && ($umode eq "unix")) ) { - if(&is_author($udom, $uname)) { - &Debug(" Need to manage author permissions..."); - &manage_permissions("/$udom/_au", $udom, $uname, "$umode:"); - } - } + + &Reply($client, \$result, $userinput); } @@ -2027,6 +2396,47 @@ sub change_authentication_handler { } ®ister_handler("changeuserauth", \&change_authentication_handler, 1,1, 0); +sub update_passwd_history { + my ($uname,$udom,$umode,$context) = @_; + my $proname=&propath($udom,$uname); + my $now = time; + if (open(my $fh,">>$proname/passwd.log")) { + print $fh "$now:$umode:$context\n"; + close($fh); + } + return; +} + +sub inst_unamemap_check { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my %rulecheck; + my $outcome; + my ($udom,$uname,@rules) = split(/:/,$tail); + $udom = &unescape($udom); + $uname = &unescape($uname); + @rules = map {&unescape($_);} (@rules); + eval { + local($SIG{__DIE__})='DEFAULT'; + $outcome = &localenroll::unamemap_check($udom,$uname,\@rules,\%rulecheck); + }; + if (!$@) { + if ($outcome eq 'ok') { + my $result=''; + foreach my $key (keys(%rulecheck)) { + $result.=&escape($key).'='.&Apache::lonnet::freeze_escape($rulecheck{$key}).'&'; + } + &Reply($client,\$result,$userinput); + } else { + &Reply($client,"error\n", $userinput); + } + } else { + &Failure($client,"unknown_cmd\n",$userinput); + } +} +®ister_handler("instunamemapcheck",\&inst_unamemap_check,0,1,0); + + # # Determines if this is the home server for a user. The home server # for a user will have his/her lon-capa passwd file. Therefore all we need @@ -2061,16 +2471,10 @@ sub is_home_handler { ®ister_handler("home", \&is_home_handler, 0,1,0); # -# Process an update request for a resource?? I think what's going on here is -# that a resource has been modified that we hold a subscription to. +# Process an update request for a resource. +# A resource has been modified that we hold a subscription to. # If the resource is not local, then we must update, or at least invalidate our # cached copy of the resource. -# FUTURE WORK: -# I need to look at this logic carefully. My druthers would be to follow -# typical caching logic, and simple invalidate the cache, drop any subscription -# an let the next fetch start the ball rolling again... however that may -# actually be more difficult than it looks given the complex web of -# proxy servers. # Parameters: # $cmd - The command that got us here. # $tail - Tail of the command (remaining parameters). @@ -2094,20 +2498,30 @@ sub update_resource_handler { my $ownership=ishome($fname); if ($ownership eq 'not_owner') { if (-e $fname) { + # Delete preview file, if exists + unlink("$fname.tmp"); + # Get usage stats my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size, $atime,$mtime,$ctime,$blksize,$blocks)=stat($fname); my $now=time; my $since=$now-$atime; + # If the file has not been used within lonExpire seconds, + # unsubscribe from it and delete local copy if ($since>$perlvar{'lonExpire'}) { my $reply=&Apache::lonnet::reply("unsub:$fname","$clientname"); &devalidate_meta_cache($fname); unlink("$fname"); unlink("$fname.meta"); } else { + # Yes, this is in active use. Get a fresh copy. Since it might be in + # very active use and huge (like a movie), copy it to "in.transfer" filename first. my $transname="$fname.in.transfer"; my $remoteurl=&Apache::lonnet::reply("sub:$fname","$clientname"); my $response; - alarm(120); +# FIXME: cannot replicate files that take more than two minutes to transfer? +# alarm(120); +# FIXME: this should use the LWP mechanism, not internal alarms. + alarm(1200); { my $ua=new LWP::UserAgent; my $request=new HTTP::Request('GET',"$remoteurl"); @@ -2115,11 +2529,17 @@ sub update_resource_handler { } alarm(0); if ($response->is_error()) { - unlink($transname); + my $reply=&Apache::lonnet::reply("unsub:$fname","$clientname"); + &devalidate_meta_cache($fname); + if (-e $transname) { + unlink($transname); + } + unlink($fname); my $message=$response->status_line; &logthis("LWP GET: $message for $fname ($remoteurl)"); } else { if ($remoteurl!~/\.meta$/) { +# FIXME: isn't there an internal LWP mechanism for this? alarm(120); { my $ua=new LWP::UserAgent; @@ -2131,6 +2551,7 @@ sub update_resource_handler { } alarm(0); } + # we successfully transfered, copy file over to real name rename($transname,$fname); &devalidate_meta_cache($fname); } @@ -2192,7 +2613,10 @@ sub fetch_user_file_handler { my $destname=$udir.'/'.$ufile; my $transname=$udir.'/'.$ufile.'.in.transit'; - my $remoteurl='http://'.$clientip.'/userfiles/'.$fname; + my $clientprotocol=$Apache::lonnet::protocol{$clientname}; + $clientprotocol = 'http' if ($clientprotocol ne 'https'); + my $clienthost = &Apache::lonnet::hostname($clientname); + my $remoteurl=$clientprotocol.'://'.$clienthost.'/userfiles/'.$fname; my $response; Debug("Remote URL : $remoteurl Transfername $transname Destname: $destname"); alarm(120); @@ -2214,6 +2638,24 @@ sub fetch_user_file_handler { unlink($transname); &Failure($client, "failed\n", $userinput); } else { + if ($fname =~ /^default.+\.(page|sequence)$/) { + my ($major,$minor) = split(/\./,$clientversion); + if (($major < 2) || ($major == 2 && $minor < 11)) { + my $now = time; + &Apache::lonnet::do_cache_new('crschange',$udom.'_'.$uname,$now,600); + my $key = &escape('internal.contentchange'); + my $what = "$key=$now"; + my $hashref = &tie_user_hash($udom,$uname,'environment', + &GDBM_WRCREAT(),"P",$what); + if ($hashref) { + $hashref->{$key}=$now; + if (!&untie_user_hash($hashref)) { + &logthis("error: ".($!+0)." untie (GDBM) failed ". + "when updating internal.contentchange"); + } + } + } + } &Reply($client, "ok\n", $userinput); } } @@ -2250,11 +2692,20 @@ sub remove_user_file_handler { if (-e $file) { # # If the file is a regular file unlink is fine... - # However it's possible the client wants a dir. - # removed, in which case rmdir is more approprate: + # However it's possible the client wants a dir + # removed, in which case rmdir is more appropriate + # Note: rmdir will only remove an empty directory. # if (-f $file){ unlink($file); + # for html files remove the associated .bak file + # which may have been created by the editor. + if ($ufile =~ m{^((docs|supplemental)/(?:\d+|default)/\d+(?:|/.+)/)[^/]+\.x?html?$}i) { + my $path = $1; + if (-e $file.'.bak') { + unlink($file.'.bak'); + } + } } elsif(-d $file) { rmdir($file); } @@ -2368,7 +2819,6 @@ sub user_has_session_handler { my ($udom, $uname) = map { &unescape($_) } (split(/:/, $tail)); - &logthis("Looking for $udom $uname"); opendir(DIR,$perlvar{'lonIDsDir'}); my $filename; while ($filename=readdir(DIR)) { @@ -2618,6 +3068,10 @@ sub newput_user_profile_entry { foreach my $pair (@pairs) { my ($key,$value)=split(/=/,$pair); if (exists($hashref->{$key})) { + if (!&untie_user_hash($hashref)) { + &logthis("error: ".($!+0)." untie (GDBM) failed ". + "while attempting newput - early out as key exists"); + } &Failure($client, "key_exists: ".$key."\n",$userinput); return 1; } @@ -2869,7 +3323,8 @@ sub get_profile_entry { # # Parameters: # $cmd - Command keyword of request (eget). -# $tail - Tail of the command. See GetProfileEntry # for more information about this. +# $tail - Tail of the command. See GetProfileEntry +# for more information about this. # $client - File open on the client. # Returns: # 1 - Continue processing @@ -3087,6 +3542,9 @@ sub dump_profile_database { # that is matched against # database keywords to do # selective dumps. +# range - optional range of entries +# e.g., 10-20 would return the +# 10th to 19th items, etc. # $client - Channel open on the client. # Returns: # 1 - Continue processing. @@ -3096,62 +3554,59 @@ sub dump_profile_database { sub dump_with_regexp { my ($cmd, $tail, $client) = @_; + my $res = LONCAPA::Lond::dump_with_regexp($tail, $clientversion); - my $userinput = "$cmd:$tail"; - - my ($udom,$uname,$namespace,$regexp,$range)=split(/:/,$tail); - if (defined($regexp)) { - $regexp=&unescape($regexp); - } else { - $regexp='.'; - } - my ($start,$end); - if (defined($range)) { - if ($range =~/^(\d+)\-(\d+)$/) { - ($start,$end) = ($1,$2); - } elsif ($range =~/^(\d+)$/) { - ($start,$end) = (0,$1); - } else { - undef($range); - } - } - my $hashref = &tie_user_hash($udom, $uname, $namespace, - &GDBM_READER()); - if ($hashref) { - my $qresult=''; - my $count=0; - while (my ($key,$value) = each(%$hashref)) { - if ($regexp eq '.') { - $count++; - if (defined($range) && $count >= $end) { last; } - if (defined($range) && $count < $start) { next; } - $qresult.=$key.'='.$value.'&'; - } else { - my $unescapeKey = &unescape($key); - if (eval('$unescapeKey=~/$regexp/')) { - $count++; - if (defined($range) && $count >= $end) { last; } - if (defined($range) && $count < $start) { next; } - $qresult.="$key=$value&"; - } - } - } - if (&untie_user_hash($hashref)) { - chop($qresult); - &Reply($client, \$qresult, $userinput); - } else { - &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting dump\n", $userinput); - } + if ($res =~ /^error:/) { + &Failure($client, \$res, "$cmd:$tail"); } else { - &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting dump\n", $userinput); + &Reply($client, \$res, "$cmd:$tail"); } return 1; } ®ister_handler("dump", \&dump_with_regexp, 0, 1, 0); +# +# Process the encrypted dump request. Original call should +# be from lonnet::dump() with seventh arg ($encrypt) set to +# 1, to ensure that both request and response are encrypted. +# +# Parameters: +# $cmd - Command keyword of request (edump). +# $tail - Tail of the command. +# See &dump_with_regexp for more +# information about this. +# $client - File open on the client. +# Returns: +# 1 - Continue processing +# 0 - server should exit. +# + +sub encrypted_dump_with_regexp { + my ($cmd, $tail, $client) = @_; + my $res = LONCAPA::Lond::dump_with_regexp($tail, $clientversion); + + if ($res =~ /^error:/) { + Failure($client, \$res, "$cmd:$tail"); + } else { + if ($cipher) { + my $cmdlength=length($res); + $res.=" "; + my $encres=''; + for (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) { + $encres.= unpack("H16", + $cipher->encrypt(substr($res, + $encidx, + 8))); + } + &Reply( $client,"enc:$cmdlength:$encres\n","$cmd:$tail"); + } else { + &Failure( $client, "error:no_key\n","$cmd:$tail"); + } + } +} +®ister_handler("edump", \&encrypted_dump_with_regexp, 0, 1, 0); + # Store a set of key=value pairs associated with a versioned name. # # Parameters: @@ -3162,6 +3617,9 @@ sub dump_with_regexp { # namespace - Name of the database being modified # rid - Resource keyword to modify. # what - new value associated with rid. +# laststore - (optional) version=timestamp +# for most recent transaction for rid +# in namespace, when cstore was called # # $client - Socket open on the client. # @@ -3170,23 +3628,47 @@ sub dump_with_regexp { # 1 (keep on processing). # Side-Effects: # Writes to the client +# Successful storage will cause either 'ok', or, if $laststore was included +# in the tail of the request, and the version number for the last transaction +# is larger than the version in $laststore, delay:$numtrans , where $numtrans +# is the number of store evevnts recorded for rid in namespace since +# lonnet::store() was called by the client. +# sub store_handler { my ($cmd, $tail, $client) = @_; my $userinput = "$cmd:$tail"; - my ($udom,$uname,$namespace,$rid,$what) =split(/:/,$tail); + chomp($tail); + my ($udom,$uname,$namespace,$rid,$what,$laststore) =split(/:/,$tail); if ($namespace ne 'roles') { - chomp($what); my @pairs=split(/\&/,$what); my $hashref = &tie_user_hash($udom, $uname, $namespace, &GDBM_WRCREAT(), "S", "$rid:$what"); if ($hashref) { my $now = time; - my @previouskeys=split(/&/,$hashref->{"keys:$rid"}); - my $key; + my $numtrans; + if ($laststore) { + my ($previousversion,$previoustime) = split(/\=/,$laststore); + my ($lastversion,$lasttime) = (0,0); + $lastversion = $hashref->{"version:$rid"}; + if ($lastversion) { + $lasttime = $hashref->{"$lastversion:$rid:timestamp"}; + } + if (($previousversion) && ($previousversion !~ /\D/)) { + if (($lastversion > $previousversion) && ($lasttime >= $previoustime)) { + $numtrans = $lastversion - $previousversion; + } + } elsif ($lastversion) { + $numtrans = $lastversion; + } + if ($numtrans) { + $numtrans =~ s/D//g; + } + } + $hashref->{"version:$rid"}++; my $version=$hashref->{"version:$rid"}; my $allkeys=''; @@ -3199,7 +3681,11 @@ sub store_handler { $allkeys.='timestamp'; $hashref->{"$version:keys:$rid"}=$allkeys; if (&untie_user_hash($hashref)) { - &Reply($client, "ok\n", $userinput); + my $msg = 'ok'; + if ($numtrans) { + $msg = 'delay:'.$numtrans; + } + &Reply($client, "$msg\n", $userinput); } else { &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". "while attempting store\n", $userinput); @@ -3461,6 +3947,37 @@ sub send_query_handler { my ($query,$arg1,$arg2,$arg3)=split(/\:/,$tail); $query=~s/\n*$//g; + if (($query eq 'usersearch') || ($query eq 'instdirsearch')) { + my $usersearchconf = &get_usersearch_config($currentdomainid,'directorysrch'); + my $earlyout; + if (ref($usersearchconf) eq 'HASH') { + if ($currentdomainid eq $clienthomedom) { + if ($query eq 'usersearch') { + if ($usersearchconf->{'lcavailable'} eq '0') { + $earlyout = 1; + } + } else { + if ($usersearchconf->{'available'} eq '0') { + $earlyout = 1; + } + } + } else { + if ($query eq 'usersearch') { + if ($usersearchconf->{'lclocalonly'}) { + $earlyout = 1; + } + } else { + if ($usersearchconf->{'localonly'}) { + $earlyout = 1; + } + } + } + } + if ($earlyout) { + &Reply($client, "query_not_authorized\n"); + return 1; + } + } &Reply($client, "". &sql_reply("$clientname\&$query". "\&$arg1"."\&$arg2"."\&$arg3")."\n", $userinput); @@ -3714,6 +4231,11 @@ sub put_course_id_hash_handler { # createdafter - include courses for which creation date followed this date. # creationcontext - include courses created in specified context # +# domcloner - flag to indicate if user can create CCs in course's domain. +# If so, ability to clone course is automatic. +# hasuniquecode - filter by courses for which a six character unique code has +# been set. +# # $client - The socket open on the client. # Returns: # 1 - Continue processing. @@ -3726,7 +4248,7 @@ sub dump_course_id_handler { my ($udom,$since,$description,$instcodefilter,$ownerfilter,$coursefilter, $typefilter,$regexp_ok,$rtn_as_hash,$selfenrollonly,$catfilter,$showhidden, $caller,$cloner,$cc_clone_list,$cloneonly,$createdbefore,$createdafter, - $creationcontext) =split(/:/,$tail); + $creationcontext,$domcloner,$hasuniquecode) =split(/:/,$tail); my $now = time; my ($cloneruname,$clonerudom,%cc_clone); if (defined($description)) { @@ -3784,24 +4306,26 @@ sub dump_course_id_handler { $cc_clone{$clonedom.'_'.$clonenum} = 1; } } - if (defined($createdbefore)) { + if ($createdbefore ne '') { $createdbefore = &unescape($createdbefore); } else { $createdbefore = 0; } - if (defined($createdafter)) { + if ($createdafter ne '') { $createdafter = &unescape($createdafter); } else { $createdafter = 0; } - if (defined($creationcontext)) { + if ($creationcontext ne '') { $creationcontext = &unescape($creationcontext); } else { $creationcontext = '.'; } - + unless ($hasuniquecode) { + $hasuniquecode = '.'; + } my $unpack = 1; - if ($description eq '.' && $instcodefilter eq '.' && $coursefilter eq '.' && + if ($description eq '.' && $instcodefilter eq '.' && $ownerfilter eq '.' && $typefilter eq '.') { $unpack = 0; } @@ -3826,8 +4350,13 @@ sub dump_course_id_handler { my ($canclone,$valchange); my $items = &Apache::lonnet::thaw_unescape($value); if (ref($items) eq 'HASH') { + if ($hashref->{$lasttime_key} eq '') { + next if ($since > 1); + } $is_hash = 1; - if (defined($clonerudom)) { + if ($domcloner) { + $canclone = 1; + } elsif (defined($clonerudom)) { if ($items->{'cloners'}) { my @cloneable = split(',',$items->{'cloners'}); if (@cloneable) { @@ -3855,6 +4384,19 @@ sub dump_course_id_handler { $items->{'cloners'} = $cloneruname.':'.$clonerudom; $valchange = 1; } + unless ($canclone) { + if ($items->{'owner'} =~ /:/) { + if ($items->{'owner'} eq $cloner) { + $canclone = 1; + } + } elsif ($cloner eq $items->{'owner'}.':'.$udom) { + $canclone = 1; + } + if ($canclone) { + $items->{'cloners'} = $cloneruname.':'.$clonerudom; + $valchange = 1; + } + } } } if ($unpack || !$rtn_as_hash) { @@ -3870,6 +4412,9 @@ sub dump_course_id_handler { $selfenroll_end = $items->{'selfenroll_end_date'}; $created = $items->{'created'}; $context = $items->{'context'}; + if ($hasuniquecode ne '.') { + next unless ($items->{'uniquecode'}); + } if ($selfenrollonly) { next if (!$selfenroll_types); if (($selfenroll_end > 0) && ($selfenroll_end <= $now)) { @@ -4055,6 +4600,91 @@ sub dump_course_id_handler { } ®ister_handler("courseiddump", \&dump_course_id_handler, 0, 1, 0); +sub course_lastaccess_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($cdom,$cnum) = split(':',$tail); + my (%lastaccess,$qresult); + my $hashref = &tie_domain_hash($cdom, "nohist_courseids", &GDBM_WRCREAT()); + if ($hashref) { + while (my ($key,$value) = each(%$hashref)) { + my ($unesc_key,$lasttime); + $unesc_key = &unescape($key); + if ($cnum) { + next unless ($unesc_key =~ /\Q$cdom\E_\Q$cnum\E$/); + } + if ($unesc_key =~ /^lasttime:($LONCAPA::match_domain\_$LONCAPA::match_courseid)/) { + $lastaccess{$1} = $value; + } else { + my $items = &Apache::lonnet::thaw_unescape($value); + if (ref($items) eq 'HASH') { + unless ($lastaccess{$unesc_key}) { + $lastaccess{$unesc_key} = ''; + } + } else { + my @courseitems = split(':',$value); + $lastaccess{$unesc_key} = pop(@courseitems); + } + } + } + foreach my $cid (sort(keys(%lastaccess))) { + $qresult.=&escape($cid).'='.$lastaccess{$cid}.'&'; + } + if (&untie_domain_hash($hashref)) { + if ($qresult) { + chop($qresult); + } + &Reply($client, \$qresult, $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting lastacourseaccess\n", $userinput); + } + } else { + &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting lastcourseaccess\n", $userinput); + } + return 1; +} +®ister_handler("courselastaccess",\&course_lastaccess_handler, 0, 1, 0); + +sub course_sessions_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($cdom,$cnum,$lastactivity) = split(':',$tail); + my $dbsuffix = '_'.$cdom.'_'.$cnum.'.db'; + my (%sessions,$qresult); + my $now=time; + if (opendir(DIR,$perlvar{'lonIDsDir'})) { + my $filename; + while ($filename=readdir(DIR)) { + next if ($filename=~/^\./); + next if ($filename=~/^publicuser_/); + next if ($filename=~/^[a-f0-9]+_(linked|lti_\d+)\.id$/); + if ($filename =~ /^($LONCAPA::match_username)_\d+_($LONCAPA::match_domain)_/) { + my ($uname,$udom) = ($1,$2); + next unless (-e "$perlvar{'lonDaemons'}/tmp/$uname$dbsuffix"); + my $mtime = (stat("$perlvar{'lonIDsDir'}/$filename"))[9]; + if ($lastactivity < 0) { + next if ($mtime-$now > $lastactivity); + } else { + next if ($now-$mtime > $lastactivity); + } + $sessions{$uname.':'.$udom} = $mtime; + } + } + closedir(DIR); + } + foreach my $user (keys(%sessions)) { + $qresult.=&escape($user).'='.$sessions{$user}.'&'; + } + if ($qresult) { + chop($qresult); + } + &Reply($client, \$qresult, $userinput); + return 1; +} +®ister_handler("coursesessions",\&course_sessions_handler, 0, 1, 0); + # # Puts an unencrypted entry in a namespace db file at the domain level # @@ -4103,7 +4733,7 @@ sub put_domain_handler { # domain directory. # # Parameters: -# $cmd - Command request keyword (get). +# $cmd - Command request keyword (getdom). # $tail - Tail of the command. This is a colon separated list # consisting of the domain and the 'namespace' # which selects the gdbm file to do the lookup in, @@ -4120,33 +4750,122 @@ sub put_domain_handler { sub get_domain_handler { my ($cmd, $tail, $client) = @_; - my $userinput = "$client:$tail"; + my $userinput = "$cmd:$tail"; my ($udom,$namespace,$what)=split(/:/,$tail,3); - chomp($what); - my @queries=split(/\&/,$what); - my $qresult=''; - my $hashref = &tie_domain_hash($udom, "$namespace", &GDBM_READER()); - if ($hashref) { - for (my $i=0;$i<=$#queries;$i++) { - $qresult.="$hashref->{$queries[$i]}&"; - } - if (&untie_domain_hash($hashref)) { - $qresult=~s/\&$//; - &Reply($client, \$qresult, $userinput); + if (($namespace =~ /^enc/) || ($namespace eq 'private')) { + &Failure( $client, "refused\n", $userinput); + } else { + my $res = LONCAPA::Lond::get_dom($userinput); + if ($res =~ /^error:/) { + &Failure($client, \$res, $userinput); } else { - &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting getdom\n",$userinput); + &Reply($client, \$res, $userinput); } - } else { - &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting getdom\n",$userinput); } return 1; } ®ister_handler("getdom", \&get_domain_handler, 0, 1, 0); +sub encrypted_get_domain_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + my ($udom,$namespace,$what) = split(/:/,$tail,3); + if ($namespace eq 'private') { + &Failure( $client, "refused\n", $userinput); + } else { + my $res = LONCAPA::Lond::get_dom($userinput); + if ($res =~ /^error:/) { + &Failure($client, \$res, $userinput); + } else { + if ($cipher) { + my $cmdlength=length($res); + $res.=" "; + my $encres=''; + for (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) { + $encres.= unpack("H16", + $cipher->encrypt(substr($res, + $encidx, + 8))); + } + &Reply( $client,"enc:$cmdlength:$encres\n",$userinput); + } else { + &Failure( $client, "error:no_key\n",$userinput); + } + } + } + return 1; +} +®ister_handler("egetdom", \&encrypted_get_domain_handler, 1, 1, 0); + +# +# Encrypted get from the namespace database file at the domain level. +# This function retrieves a keyed item from a specific named database in the +# domain directory. +# +# Parameters: +# $cmd - Command request keyword (lti). +# $tail - Tail of the command. This is a colon-separated list +# consisting of the domain, coursenum, if for LTI- +# enabled deep-linking to course content using +# link protection configured within a course, +# context (=deeplink) if for LTI-enabled deep-linking +# to course content using LTI Provider settings +# configured within a course's domain, the (escaped) +# launch URL, the (escaped) method (typically POST), +# and a frozen hash of the LTI launch parameters +# from the LTI payload. +# $client - File descriptor open on the client. +# Returns: +# 1 - Continue processing. +# 0 - Exit. +# Side effects: +# The reply will contain an LTI itemID, if the signed LTI payload +# could be verified using the consumer key and the shared secret +# available for that key (for the itemID) for either the course or domain, +# depending on values for cnum and context. The reply is encrypted before +# being written to $client. +# +sub lti_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + my ($cdom,$cnum,$context,$escurl,$escmethod,$items) = split(/:/,$tail); + my $url = &unescape($escurl); + my $method = &unescape($escmethod); + my $params = &Apache::lonnet::thaw_unescape($items); + my $res; + if ($cnum ne '') { + $res = &LONCAPA::Lond::crslti_itemid($cdom,$cnum,$url,$method,$params,$perlvar{'lonVersion'}); + } else { + $res = &LONCAPA::Lond::domlti_itemid($cdom,$context,$url,$method,$params,$perlvar{'lonVersion'}); + } + if ($res =~ /^error:/) { + &Failure($client, \$res, $userinput); + } else { + if ($cipher) { + my $cmdlength=length($res); + $res.=" "; + my $encres=''; + for (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) { + $encres.= unpack("H16", + $cipher->encrypt(substr($res, + $encidx, + 8))); + } + &Reply( $client,"enc:$cmdlength:$encres\n",$userinput); + } else { + &Failure( $client, "error:no_key\n",$userinput); + } + } + return 1; +} +®ister_handler("lti", \<i_handler, 1, 1, 0); + # # Puts an id to a domains id database. # @@ -4244,6 +4963,49 @@ sub get_id_handler { } ®ister_handler("idget", \&get_id_handler, 0, 1, 0); +# Deletes one or more ids in a domain's id database. +# +# Parameters: +# $cmd - Command keyword (iddel). +# $tail - Command tail. In this case a colon +# separated list containing: +# The domain for which we are deleting the id(s). +# &-separated list of id(s) to delete. +# $client - File open on client socket. +# Returns: +# 1 - Continue processing +# 0 - Exit server. +# +# + +sub del_id_handler { + my ($cmd,$tail,$client) = @_; + + my $userinput = "$cmd:$tail"; + + my ($udom,$what)=split(/:/,$tail); + chomp($what); + my $hashref = &tie_domain_hash($udom, "ids", &GDBM_WRCREAT(), + "D", $what); + if ($hashref) { + my @keys=split(/\&/,$what); + foreach my $key (@keys) { + delete($hashref->{$key}); + } + if (&untie_user_hash($hashref)) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting iddel\n", $userinput); + } + } else { + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting iddel\n", $userinput); + } + return 1; +} +®ister_handler("iddel", \&del_id_handler, 0, 1, 0); + # # Puts broadcast e-mail sent by Domain Coordinator in nohist_dcmail database # @@ -4264,7 +5026,8 @@ sub get_id_handler { sub put_dcmail_handler { my ($cmd,$tail,$client) = @_; my $userinput = "$cmd:$tail"; - + + my ($udom,$what)=split(/:/,$tail); chomp($what); my $hashref = &tie_domain_hash($udom, "nohist_dcmail", &GDBM_WRCREAT()); @@ -4528,15 +5291,23 @@ sub tmp_put_handler { } my ($id,$store); $tmpsnum++; - if ($context eq 'resetpw') { - $id = &md5_hex(&md5_hex(time.{}.rand().$$)); + my $numtries = 0; + my $execdir=$perlvar{'lonDaemons'}; + if (($context eq 'resetpw') || ($context eq 'createaccount') || + ($context eq 'sso') || ($context eq 'link') || ($context eq 'retry')) { + $id = &md5_hex(&md5_hex(time.{}.rand().$$.$tmpsnum)); + while ((-e "$execdir/tmp/$id.tmp") && ($numtries <10)) { + undef($id); + $id = &md5_hex(&md5_hex(time.{}.rand().$$.$tmpsnum)); + $numtries ++; + } } else { $id = $$.'_'.$clientip.'_'.$tmpsnum; } $id=~s/\W/\_/g; $record=~s/\n//g; - my $execdir=$perlvar{'lonDaemons'}; - if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) { + if (($id ne '') && + ($store=IO::File->new(">$execdir/tmp/$id.tmp"))) { print $store $record; close $store; &Reply($client, \$id, $userinput); @@ -4619,6 +5390,116 @@ sub tmp_del_handler { ®ister_handler("tmpdel", \&tmp_del_handler, 0, 1, 0); # +# Process the updatebalcookie command. This command updates a +# cookie in the lonBalancedir directory on a load balancer node. +# +# Parameters: +# $cmd - Command that got us here. +# $tail - Tail of the request (escaped cookie: escaped current entry) +# +# $client - socket open on the client process. +# +# Returns: +# 1 - Indicating processing should continue. +# Side Effects: +# A cookie file is updated from the lonBalancedir directory +# A reply is sent to the client. +# +sub update_balcookie_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput= "$cmd:$tail"; + chomp($tail); + my ($cookie,$lastentry) = map { &unescape($_) } (split(/:/,$tail)); + + my $updatedone; + if ($cookie =~ /^$LONCAPA::match_domain\_$LONCAPA::match_username\_[a-f0-9]{32}$/) { + my $execdir=$perlvar{'lonBalanceDir'}; + if (-e "$execdir/$cookie.id") { + my $doupdate; + if (open(my $fh,'<',"$execdir/$cookie.id")) { + while (my $line = <$fh>) { + chomp($line); + if ($line eq $lastentry) { + $doupdate = 1; + last; + } + } + close($fh); + } + if ($doupdate) { + if (open(my $fh,'>',"$execdir/$cookie.id")) { + print $fh $clientname; + close($fh); + $updatedone = 1; + } + } + } + } + if ($updatedone) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure( $client, "error: ".($!+0)."file update failed ". + "while attempting updatebalcookie\n", $userinput); + } + return 1; +} +®ister_handler("updatebalcookie", \&update_balcookie_handler, 0, 1, 0); + +# +# Process the delbalcookie command. This command deletes a balancer +# cookie in the lonBalancedir directory on a load balancer node. +# +# Parameters: +# $cmd - Command that got us here. +# $cookie - Cookie to be deleted. +# $client - socket open on the client process. +# +# Returns: +# 1 - Indicating processing should continue. +# Side Effects: +# A cookie file is deleted from the lonBalancedir directory +# A reply is sent to the client. +sub del_balcookie_handler { + my ($cmd, $cookie, $client) = @_; + + my $userinput= "$cmd:$cookie"; + + chomp($cookie); + $cookie = &unescape($cookie); + my $deleted = ''; + if ($cookie =~ /^$LONCAPA::match_domain\_$LONCAPA::match_username\_[a-f0-9]{32}$/) { + my $execdir=$perlvar{'lonBalanceDir'}; + if (-e "$execdir/$cookie.id") { + if (open(my $fh,'<',"$execdir/$cookie.id")) { + my $dodelete; + while (my $line = <$fh>) { + chomp($line); + if ($line eq $clientname) { + $dodelete = 1; + last; + } + } + close($fh); + if ($dodelete) { + if (unlink("$execdir/$cookie.id")) { + $deleted = 1; + } + } + } + } + } + if ($deleted) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure( $client, "error: ".($!+0)."Unlinking cookie file Failed ". + "while attempting delbalcookie\n", $userinput); + } + return 1; +} +®ister_handler("delbalcookie", \&del_balcookie_handler, 0, 1, 0); + +# # Processes the setannounce command. This command # creates a file named announce.txt in the top directory of # the documentn root and sets its contents. The announce.txt file is @@ -4791,15 +5672,49 @@ sub validate_instcode_handler { my ($dom,$instcode,$owner) = split(/:/, $tail); $instcode = &unescape($instcode); $owner = &unescape($owner); - my ($outcome,$description) = + my ($outcome,$description,$credits) = &localenroll::validate_instcode($dom,$instcode,$owner); - my $result = &escape($outcome).'&'.&escape($description); + my $result = &escape($outcome).'&'.&escape($description).'&'. + &escape($credits); &Reply($client, \$result, $userinput); return 1; } ®ister_handler("autovalidateinstcode", \&validate_instcode_handler, 0, 1, 0); +# +# Validate co-owner for cross-listed institutional code and +# institutional course code itself used for a LON-CAPA course. +# +# Formal Parameters: +# $cmd - The command request that got us dispatched. +# $tail - The tail of the command. In this case, +# this is a colon separated string containing: +# $dom - Course's LON-CAPA domain +# $instcode - Institutional course code for the course +# $inst_xlist - Institutional course Id for the crosslisting +# $coowner - Username of co-owner +# (values for all but $dom have been escaped). +# +# $client - Socket open on the client. +# Returns: +# 1 - Indicating processing should continue. +# +sub validate_instcrosslist_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($dom,$instcode,$inst_xlist,$coowner) = split(/:/,$tail); + $instcode = &unescape($instcode); + $inst_xlist = &unescape($inst_xlist); + $coowner = &unescape($coowner); + my $outcome = &localenroll::validate_crosslist_access($dom,$instcode, + $inst_xlist,$coowner); + &Reply($client, \$outcome, $userinput); + + return 1; +} +®ister_handler("autovalidateinstcrosslist", \&validate_instcrosslist_handler, 0, 1, 0); + # Get the official sections for which auto-enrollment is possible. # Since the admin people won't know about 'unofficial sections' # we cannot auto-enroll on them. @@ -4846,10 +5761,11 @@ sub get_sections_handler { sub validate_course_owner_handler { my ($cmd, $tail, $client) = @_; my $userinput = "$cmd:$tail"; - my ($inst_course_id, $owner, $cdom) = split(/:/, $tail); - + my ($inst_course_id, $owner, $cdom, $coowners) = split(/:/, $tail); + $owner = &unescape($owner); - my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom); + $coowners = &unescape($coowners); + my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom,$coowners); &Reply($client, \$outcome, $userinput); @@ -4895,9 +5811,10 @@ sub validate_course_section_handler { # Formal Parameters: # $cmd - The command request that got us dispatched. # $tail - The tail of the command. In this case this is a colon separated -# set of words that will be split into: +# set of values that will be split into: # $inst_class - Institutional code for the specific class section -# $courseowner - The escaped username:domain of the course owner +# $ownerlist - An escaped comma-separated list of username:domain +# of the course owner, and co-owner(s). # $cdom - The domain of the course from the institution's # point of view. # $client - The socket open on the client. @@ -4922,6 +5839,112 @@ sub validate_class_access_handler { ®ister_handler("autovalidateclass_sec", \&validate_class_access_handler, 0, 1, 0); # +# Modify institutional sections (using customized &instsec_reformat() +# routine in localenroll.pm), to either clutter or declutter, for +# purposes of ensuring an institutional course section (string) can +# be unambiguously separated into institutional course and section. +# +# Formal Parameters: +# $cmd - The command request that got us dispatched. +# $tail - The tail of the command. In this case this is a colon separated +# set of values that will be split into: +# $cdom - The LON-CAPA domain of the course. +# $action - Either: clutter or declutter +# clutter adds character(s) to eliminate ambiguity +# declutter removes the added characters (e.g., for +# display of the institutional course section string. +# $info - A frozen hash in which keys are: +# LON-CAPA course number:Institutional course code +# and values are a reference to an array of the +# items to modify -- either institutional sections, +# or institutional course sections (for crosslistings). +# $client - The socket open on the client. +# Returns: +# 1 - continue processing. +# + +sub instsec_reformat_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($cdom,$action,$info) = split(/:/,$tail); + my $instsecref = &Apache::lonnet::thaw_unescape($info); + my ($outcome,$result); + eval { + local($SIG{__DIE__})='DEFAULT'; + $outcome=&localenroll::instsec_reformat($cdom,$action,$instsecref); + if ($outcome eq 'ok') { + if (ref($instsecref) eq 'HASH') { + foreach my $key (keys(%{$instsecref})) { + $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($instsecref->{$key}).'&'; + } + $result =~ s/\&$//; + } + } + }; + if (!$@) { + if ($outcome eq 'ok') { + &Reply( $client, \$result, $userinput); + } else { + &Reply($client,\$outcome, $userinput); + } + } else { + &Failure($client,"unknown_cmd\n",$userinput); + } + return 1; +} +®ister_handler("autoinstsecreformat",\&instsec_reformat_handler, 0, 1, 0); + +# +# Validate course owner or co-owners(s) access to enrollment data for all sections +# and crosslistings for a particular course. +# +# +# Formal Parameters: +# $cmd - The command request that got us dispatched. +# $tail - The tail of the command. In this case this is a colon separated +# set of values that will be split into: +# $ownerlist - An escaped comma-separated list of username:domain +# of the course owner, and co-owner(s). +# $cdom - The domain of the course from the institution's +# point of view. +# $classes - Frozen hash of institutional course sections and +# crosslistings. +# $client - The socket open on the client. +# Returns: +# 1 - continue processing. +# + +sub validate_classes_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($ownerlist,$cdom,$classes) = split(/:/, $tail); + my $classesref = &Apache::lonnet::thaw_unescape($classes); + my $owners = &unescape($ownerlist); + my $result; + eval { + local($SIG{__DIE__})='DEFAULT'; + my %validations; + my $response = &localenroll::check_instclasses($owners,$cdom,$classesref, + \%validations); + if ($response eq 'ok') { + foreach my $key (keys(%validations)) { + $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($validations{$key}).'&'; + } + $result =~ s/\&$//; + } else { + $result = 'error'; + } + }; + if (!$@) { + &Reply($client, \$result, $userinput); + } else { + &Failure($client,"unknown_cmd\n",$userinput); + } + return 1; +} +®ister_handler("autovalidateinstclasses", \&validate_classes_handler, 0, 1, 0); + +# # Create a password for a new LON-CAPA user added by auto-enrollment. # Only used for case where authentication method for new user is localauth # @@ -4956,13 +5979,59 @@ sub create_auto_enroll_password_handler ®ister_handler("autocreatepassword", \&create_auto_enroll_password_handler, 0, 1, 0); +sub auto_export_grades_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($cdom,$cnum,$info,$data) = split(/:/,$tail); + my $inforef = &Apache::lonnet::thaw_unescape($info); + my $dataref = &Apache::lonnet::thaw_unescape($data); + my ($outcome,$result);; + eval { + local($SIG{__DIE__})='DEFAULT'; + my %rtnhash; + $outcome=&localenroll::export_grades($cdom,$cnum,$inforef,$dataref,\%rtnhash); + if ($outcome eq 'ok') { + foreach my $key (keys(%rtnhash)) { + $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rtnhash{$key}).'&'; + } + $result =~ s/\&$//; + } + }; + if (!$@) { + if ($outcome eq 'ok') { + if ($cipher) { + my $cmdlength=length($result); + $result.=" "; + my $encresult=''; + for (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) { + $encresult.= unpack("H16", + $cipher->encrypt(substr($result, + $encidx, + 8))); + } + &Reply( $client, "enc:$cmdlength:$encresult\n", $userinput); + } else { + &Failure( $client, "error:no_key\n", $userinput); + } + } else { + &Reply($client, "$outcome\n", $userinput); + } + } else { + &Failure($client,"export_error\n",$userinput); + } + return 1; +} +®ister_handler("autoexportgrades", \&auto_export_grades_handler, + 1, 1, 0); + + # Retrieve and remove temporary files created by/during autoenrollment. # # Formal Parameters: # $cmd - The command that got us dispatched. # $tail - The tail of the command. In our case this is a colon # separated list that will be split into: -# $filename - The name of the file to remove. +# $filename - The name of the file to retrieve. # The filename is given as a path relative to # the LonCAPA temp file directory. # $client - Socket open on the client. @@ -4976,7 +6045,11 @@ sub retrieve_auto_file_handler { my ($filename) = split(/:/, $tail); my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename; - if ( (-e $source) && ($filename ne '') ) { + if ($filename =~m{/\.\./}) { + &Failure($client, "refused\n", $userinput); + } elsif ($filename !~ /^$LONCAPA::match_domain\_$LONCAPA::match_courseid\_.+_classlist\.xml$/) { + &Failure($client, "refused\n", $userinput); + } elsif ( (-e $source) && ($filename ne '') ) { my $reply = ''; if (open(my $fh,$source)) { while (<$fh>) { @@ -5008,7 +6081,7 @@ sub crsreq_checks_handler { my $userinput = "$cmd:$tail"; my $dom = $tail; my $result; - my @reqtypes = ('official','unofficial','community'); + my @reqtypes = ('official','unofficial','community','textbook'); eval { local($SIG{__DIE__})='DEFAULT'; my %validations; @@ -5035,19 +6108,20 @@ sub crsreq_checks_handler { sub validate_crsreq_handler { my ($cmd, $tail, $client) = @_; my $userinput = "$cmd:$tail"; - my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist) = split(/:/, $tail); + my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist,$customdata) = split(/:/, $tail); $instcode = &unescape($instcode); $owner = &unescape($owner); $crstype = &unescape($crstype); $inststatuslist = &unescape($inststatuslist); $instcode = &unescape($instcode); $instseclist = &unescape($instseclist); + my $custominfo = &Apache::lonnet::thaw_unescape($customdata); my $outcome; eval { local($SIG{__DIE__})='DEFAULT'; $outcome = &localenroll::validate_crsreq($dom,$owner,$crstype, $inststatuslist,$instcode, - $instseclist); + $instseclist,$custominfo); }; if (!$@) { &Reply($client, \$outcome, $userinput); @@ -5058,6 +6132,53 @@ sub validate_crsreq_handler { } ®ister_handler("autocrsreqvalidation", \&validate_crsreq_handler, 0, 1, 0); +sub crsreq_update_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($cdom,$cnum,$crstype,$action,$ownername,$ownerdomain,$fullname,$title,$code, + $accessstart,$accessend,$infohashref) = + split(/:/, $tail); + $crstype = &unescape($crstype); + $action = &unescape($action); + $ownername = &unescape($ownername); + $ownerdomain = &unescape($ownerdomain); + $fullname = &unescape($fullname); + $title = &unescape($title); + $code = &unescape($code); + $accessstart = &unescape($accessstart); + $accessend = &unescape($accessend); + my $incoming = &Apache::lonnet::thaw_unescape($infohashref); + my ($result,$outcome); + eval { + local($SIG{__DIE__})='DEFAULT'; + my %rtnhash; + $outcome = &localenroll::crsreq_updates($cdom,$cnum,$crstype,$action, + $ownername,$ownerdomain,$fullname, + $title,$code,$accessstart,$accessend, + $incoming,\%rtnhash); + if ($outcome eq 'ok') { + my @posskeys = qw(createdweb createdmsg createdcustomized createdactions queuedweb queuedmsg formitems reviewweb validationjs onload javascript); + foreach my $key (keys(%rtnhash)) { + if (grep(/^\Q$key\E/,@posskeys)) { + $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rtnhash{$key}).'&'; + } + } + $result =~ s/\&$//; + } + }; + if (!$@) { + if ($outcome eq 'ok') { + &Reply($client, \$result, $userinput); + } else { + &Reply($client, "format_error\n", $userinput); + } + } else { + &Failure($client,"unknown_cmd\n",$userinput); + } + return 1; +} +®ister_handler("autocrsrequpdate", \&crsreq_update_handler, 0, 1, 0); + # # Read and retrieve institutional code format (for support form). # Formal Parameters: @@ -5277,6 +6398,39 @@ sub get_institutional_selfcreate_rules { } ®ister_handler("instemailrules",\&get_institutional_selfcreate_rules,0,1,0); +sub get_unamemap_rules { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my $dom = &unescape($tail); + my (%rules_hash,@rules_order); + my $outcome; + eval { + local($SIG{__DIE__})='DEFAULT'; + $outcome = &localenroll::unamemap_rules($dom,\%rules_hash,\@rules_order); + }; + if (!$@) { + if ($outcome eq 'ok') { + my $result; + foreach my $key (keys(%rules_hash)) { + $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rules_hash{$key}).'&'; + } + $result =~ s/\&$//; + $result .= ':'; + if (@rules_order > 0) { + foreach my $item (@rules_order) { + $result .= &escape($item).'&'; + } + } + $result =~ s/\&$//; + &Reply($client,\$result,$userinput); + } else { + &Reply($client,"error\n", $userinput); + } + } else { + &Failure($client,"unknown_cmd\n",$userinput); + } +} +®ister_handler("unamemaprules",\&get_unamemap_rules,0,1,0); sub institutional_username_check { my ($cmd, $tail, $client) = @_; @@ -5765,18 +6919,6 @@ sub lcpasswdstrerror { } } -# -# Convert an error return code from lcuseradd to a string value: -# -sub lcuseraddstrerror { - my $ErrorCode = shift; - if(($ErrorCode < 0) || ($ErrorCode > $lastadderror)) { - return "lcuseradd - Unrecognized error code: ".$ErrorCode; - } else { - return $adderrors[$ErrorCode]; - } -} - # grabs exception and records it to log before exiting sub catchexception { my ($error)=@_; @@ -5813,8 +6955,8 @@ my $wwwid=getpwnam('www'); if ($wwwid!=$<) { my $emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}"; my $subj="LON: $currenthostid User ID mismatch"; - system("echo 'User ID mismatch. lond must be run as user www.' |\ - mailto $emailto -s '$subj' > /dev/null"); + system("echo 'User ID mismatch. lond must be run as user www.' |". + " mail -s '$subj' $emailto > /dev/null"); exit 1; } @@ -5837,7 +6979,7 @@ if (-e $pidfile) { $server = IO::Socket::INET->new(LocalPort => $perlvar{'londPort'}, Type => SOCK_STREAM, Proto => 'tcp', - Reuse => 1, + ReuseAddr => 1, Listen => 10 ) or die "making socket: $@\n"; @@ -5900,9 +7042,13 @@ sub HUPSMAN { # sig # a setuid perl script that can be root for us to do this job. # sub ReloadApache { - my $execdir = $perlvar{'lonDaemons'}; - my $script = $execdir."/apachereload"; - system($script); +# --------------------------- Handle case of another apachereload process (locking) + if (&LONCAPA::try_to_lock('/tmp/lock_apachereload')) { + my $execdir = $perlvar{'lonDaemons'}; + my $script = $execdir."/apachereload"; + system($script); + unlink('/tmp/lock_apachereload'); # Remove the lock file. + } } # @@ -6075,7 +7221,7 @@ sub logstatus { sub initnewstatus { my $docdir=$perlvar{'lonDocRoot'}; my $fh=IO::File->new(">$docdir/lon-status/londstatus.txt"); - my $now=time; + my $now=time(); my $local=localtime($now); print $fh "LOND status $local - parent $$\n\n"; opendir(DIR,"$docdir/lon-status/londchld"); @@ -6164,8 +7310,16 @@ $SIG{USR2} = \&UpdateHosts; # Read the host hashes: &Apache::lonnet::load_hosts_tab(); +my %iphost = &Apache::lonnet::get_iphost(1); -my $dist=`$perlvar{'lonDaemons'}/distprobe`; +$dist=`$perlvar{'lonDaemons'}/distprobe`; + +my $arch = `uname -i`; +chomp($arch); +if ($arch eq 'unknown') { + $arch = `uname -m`; + chomp($arch); +} # -------------------------------------------------------------- # Accept connections. When a connection comes in, it is validated @@ -6224,6 +7378,7 @@ sub make_new_child { or die "Can't unblock SIGINT for fork: $!\n"; $children{$pid} = $clientip; &status('Started child '.$pid); + close($client); return; } else { # Child can *not* return from this subroutine. @@ -6232,6 +7387,13 @@ sub make_new_child { #don't get intercepted $SIG{USR1}= \&logstatus; $SIG{ALRM}= \&timeout; + # + # Block sigpipe as it gets thrownon socket disconnect and we want to + # deal with that as a read faiure instead. + # + my $blockset = POSIX::SigSet->new(SIGPIPE); + sigprocmask(SIG_BLOCK, $blockset); + $lastlog='Forked '; $status='Forked'; @@ -6242,10 +7404,28 @@ sub make_new_child { # my $tmpsnum=0; # Now global #---------------------------------------------------- kerberos 5 initialization &Authen::Krb5::init_context(); - unless (($dist eq 'fedora5') || ($dist eq 'fedora4') || - ($dist eq 'fedora6') || ($dist eq 'suse9.3')) { - &Authen::Krb5::init_ets(); - } + + my $no_ets; + if ($dist =~ /^(?:centos|rhes|scientific|oracle|rocky|alma)(\d+)/) { + if ($1 >= 7) { + $no_ets = 1; + } + } elsif ($dist =~ /^suse(\d+\.\d+)$/) { + if (($1 eq '9.3') || ($1 >= 12.2)) { + $no_ets = 1; + } + } elsif ($dist =~ /^sles(\d+)$/) { + if ($1 > 11) { + $no_ets = 1; + } + } elsif ($dist =~ /^fedora(\d+)$/) { + if ($1 < 7) { + $no_ets = 1; + } + } + unless ($no_ets) { + &Authen::Krb5::init_ets(); + } &status('Accepted connection'); # ============================================================================= @@ -6260,7 +7440,7 @@ sub make_new_child { &ReadManagerTable(); my $clientrec=defined(&Apache::lonnet::get_hosts_from_ip($outsideip)); my $ismanager=($managers{$outsideip} ne undef); - $clientname = "[unknonwn]"; + $clientname = "[unknown]"; if($clientrec) { # Establish client type. $ConnectionType = "client"; $clientname = (&Apache::lonnet::get_hosts_from_ip($outsideip))[-1]; @@ -6288,7 +7468,13 @@ sub make_new_child { # # If the remote is attempting a local init... give that a try: # - my ($i, $inittype) = split(/:/, $remotereq); + (my $i, my $inittype, $clientversion) = split(/:/, $remotereq); + # For LON-CAPA 2.9, the client session will have sent its LON-CAPA + # version when initiating the connection. For LON-CAPA 2.8 and older, + # the version is retrieved from the global %loncaparevs in lonnet.pm. + # $clientversion contains path to keyfile if $inittype eq 'local' + # it's overridden below in this case + $clientversion ||= $Apache::lonnet::loncaparevs{$clientname}; # If the connection type is ssl, but I didn't get my # certificate files yet, then I'll drop back to @@ -6308,6 +7494,7 @@ sub make_new_child { } if($inittype eq "local") { + $clientversion = $perlvar{'lonVersion'}; my $key = LocalConnection($client, $remotereq); if($key) { Debug("Got local key $key"); @@ -6315,7 +7502,7 @@ sub make_new_child { my $cipherkey = pack("H32", $key); $cipher = new IDEA($cipherkey); print $client "ok:local\n"; - &logthis('' . "Successful local authentication "); $keymode = "local" } else { @@ -6352,7 +7539,6 @@ sub make_new_child { ."Attempted insecure connection disallowed "); close $client; $clientok = 0; - } } } else { @@ -6361,7 +7547,6 @@ sub make_new_child { ."$clientip failed to initialize: >$remotereq< "); &status('No init '.$clientip); } - } else { &logthis( "WARNING: Unknown client $clientip"); @@ -6379,12 +7564,15 @@ sub make_new_child { # ------------------------------------------------------------ Process requests my $keep_going = 1; my $user_input; + my $clienthost = &Apache::lonnet::hostname($clientname); + my $clientserverhomeID = &Apache::lonnet::get_server_homeID($clienthost); + $clienthomedom = &Apache::lonnet::host_domain($clientserverhomeID); while(($user_input = get_request) && $keep_going) { alarm(120); Debug("Main: Got $user_input\n"); $keep_going = &process_request($user_input); alarm(0); - &status('Listening to '.$clientname." ($keymode)"); + &status('Listening to '.$clientname." ($keymode)"); } # --------------------------------------------- client unknown or fishy, refuse @@ -6400,8 +7588,8 @@ sub make_new_child { &logthis("CRITICAL: " ."Disconnect from $clientip ($clientname)"); - - + + # this exit is VERY important, otherwise the child will become # a producer of more and more children, forking yourself into # process death. @@ -6428,22 +7616,29 @@ sub is_author { # Author role should show up as a key /domain/_au - my $key = "/$domain/_au"; my $value; - if (defined($hashref)) { - $value = $hashref->{$key}; - } + if ($hashref) { - if(defined($value)) { - &Debug("$user @ $domain is an author"); + my $key = "/$domain/_au"; + if (defined($hashref)) { + $value = $hashref->{$key}; + if(!untie_user_hash($hashref)) { + return 'error: ' . ($!+0)." untie (GDBM) Failed"; + } + } + + if(defined($value)) { + &Debug("$user @ $domain is an author"); + } + } else { + return 'error: '.($!+0)." tie (GDBM) Failed"; } return defined($value); } # # Checks to see if the input roleput request was to set -# an author role. If so, invokes the lchtmldir script to set -# up a correct public_html +# an author role. If so, creates construction space # Parameters: # request - The request sent to the rolesput subchunk. # We're looking for /domain/_au @@ -6453,16 +7648,15 @@ sub is_author { # sub manage_permissions { my ($request, $domain, $user, $authtype) = @_; - - &Debug("manage_permissions: $request $domain $user $authtype"); - # See if the request is of the form /$domain/_au if($request =~ /^(\/\Q$domain\E\/_au)$/) { # It's an author rolesput... - my $execdir = $perlvar{'lonDaemons'}; - my $userhome= "/home/$user" ; - &logthis("system $execdir/lchtmldir $userhome $user $authtype"); - &Debug("Setting homedir permissions for $userhome"); - system("$execdir/lchtmldir $userhome $user $authtype"); + my $path=$perlvar{'lonDocRoot'}."/priv/$domain"; + unless (-e $path) { + mkdir($path); + } + unless (-e $path.'/'.$user) { + mkdir($path.'/'.$user); + } } } @@ -6510,15 +7704,25 @@ sub password_filename { # domain - domain of the user. # name - User's name. # contents - New contents of the file. +# saveold - (optional). If true save old file in a passwd.bak file. # Returns: # 0 - Failed. # 1 - Success. # sub rewrite_password_file { - my ($domain, $user, $contents) = @_; + my ($domain, $user, $contents, $saveold) = @_; my $file = &password_filename($domain, $user); if (defined $file) { + if ($saveold) { + my $bakfile = $file.'.bak'; + if (CopyFile($file,$bakfile)) { + chmod(0400,$bakfile); + &logthis("Old password saved in passwd.bak for internally authenticated user: $user:$domain"); + } else { + &logthis("Failed to save old password in passwd.bak for internally authenticated user: $user:$domain"); + } + } my $pf = IO::File->new(">$file"); if($pf) { print $pf "$contents\n"; @@ -6537,9 +7741,7 @@ sub rewrite_password_file { # Returns the authorization type or nouser if there is no such user. # -sub get_auth_type -{ - +sub get_auth_type { my ($domain, $user) = @_; Debug("get_auth_type( $domain, $user ) \n"); @@ -6607,14 +7809,39 @@ sub validate_user { } elsif ((($domdefaults{'auth_def'} eq 'krb4') || ($domdefaults{'auth_def'} eq 'krb5')) && ($domdefaults{'auth_arg_def'} ne '')) { - $howpwd = $domdefaults{'auth_def'}; - $contentpwd = $domdefaults{'auth_arg_def'}; + # + # Don't attempt authentication for username and password supplied + # for user without an account if username contains @ to avoid + # call to &Authen::Krb5::parse_name() which will result in con_lost + # + unless ($user =~ /\@/) { + $howpwd = $domdefaults{'auth_def'}; + $contentpwd = $domdefaults{'auth_arg_def'}; + } } } - } + } if ($howpwd ne 'nouser') { if($howpwd eq "internal") { # Encrypted is in local password file. - $validated = (crypt($password, $contentpwd) eq $contentpwd); + if (length($contentpwd) == 13) { + $validated = (crypt($password,$contentpwd) eq $contentpwd); + if ($validated) { + my %domdefaults = &Apache::lonnet::get_domain_defaults($domain); + if ($domdefaults{'intauth_switch'}) { + my $ncpass = &hash_passwd($domain,$password); + my $saveold; + if ($domdefaults{'intauth_switch'} == 2) { + $saveold = 1; + } + if (&rewrite_password_file($domain,$user,"$howpwd:$ncpass",$saveold)) { + &update_passwd_history($user,$domain,$howpwd,'conversion'); + &logthis("Validated password hashed with bcrypt for $user:$domain"); + } + } + } + } else { + $validated = &check_internal_passwd($password,$contentpwd,$domain,$user); + } } elsif ($howpwd eq "unix") { # User is a normal unix user. $contentpwd = (getpwnam($user))[1]; @@ -6634,54 +7861,24 @@ sub validate_user { } else { $validated = 0; } - } - elsif ($howpwd eq "krb4") { # user is in kerberos 4 auth. domain. - if(! ($password =~ /$null/) ) { - my $k4error = &Authen::Krb4::get_pw_in_tkt($user, - "", - $contentpwd,, - 'krbtgt', - $contentpwd, - 1, - $password); - if(!$k4error) { - $validated = 1; - } else { - $validated = 0; - &logthis('krb4: '.$user.', '.$contentpwd.', '. - &Authen::Krb4::get_err_txt($Authen::Krb4::error)); - } - } else { - $validated = 0; # Password has a match with null. - } + } elsif ($howpwd eq "krb4") { # user is in kerberos 4 auth. domain. + my $checkwithkrb5 = 0; + if ($dist =~/^fedora(\d+)$/) { + if ($1 > 11) { + $checkwithkrb5 = 1; + } + } elsif ($dist =~ /^suse([\d.]+)$/) { + if ($1 > 11.1) { + $checkwithkrb5 = 1; + } + } + if ($checkwithkrb5) { + $validated = &krb5_authen($password,$null,$user,$contentpwd); + } else { + $validated = &krb4_authen($password,$null,$user,$contentpwd); + } } elsif ($howpwd eq "krb5") { # User is in kerberos 5 auth. domain. - if(!($password =~ /$null/)) { # Null password not allowed. - my $krbclient = &Authen::Krb5::parse_name($user.'@' - .$contentpwd); - my $krbservice = "krbtgt/".$contentpwd."\@".$contentpwd; - my $krbserver = &Authen::Krb5::parse_name($krbservice); - my $credentials= &Authen::Krb5::cc_default(); - $credentials->initialize(&Authen::Krb5::parse_name($user.'@' - .$contentpwd)); - my $krbreturn; - if (exists(&Authen::Krb5::get_init_creds_password)) { - $krbreturn = - &Authen::Krb5::get_init_creds_password($krbclient,$password, - $krbservice); - $validated = (ref($krbreturn) eq 'Authen::Krb5::Creds'); - } else { - $krbreturn = - &Authen::Krb5::get_in_tkt_with_password($krbclient,$krbserver, - $password,$credentials); - $validated = ($krbreturn == 1); - } - if (!$validated) { - &logthis('krb5: '.$user.', '.$contentpwd.', '. - &Authen::Krb5::error()); - } - } else { - $validated = 0; - } + $validated = &krb5_authen($password,$null,$user,$contentpwd); } elsif ($howpwd eq "localauth") { # Authenticate via installation specific authentcation method: $validated = &localauth::localauth($user, @@ -6712,6 +7909,109 @@ sub validate_user { return $validated; } +sub check_internal_passwd { + my ($plainpass,$stored,$domain,$user) = @_; + my (undef,$method,@rest) = split(/!/,$stored); + if ($method eq 'bcrypt') { + my $result = &hash_passwd($domain,$plainpass,@rest); + if ($result ne $stored) { + return 0; + } + my %domdefaults = &Apache::lonnet::get_domain_defaults($domain); + if ($domdefaults{'intauth_check'}) { + # Upgrade to a larger number of rounds if necessary + my $defaultcost = $domdefaults{'intauth_cost'}; + if (($defaultcost eq '') || ($defaultcost =~ /D/)) { + $defaultcost = 10; + } + if (int($rest[0])initialize(&Authen::Krb5::parse_name($user.'@' + .$contentpwd)); + my $krbreturn; + if (exists(&Authen::Krb5::get_init_creds_password)) { + $krbreturn = + &Authen::Krb5::get_init_creds_password($krbclient,$password, + $krbservice); + $validated = (ref($krbreturn) eq 'Authen::Krb5::Creds'); + } else { + $krbreturn = + &Authen::Krb5::get_in_tkt_with_password($krbclient,$krbserver, + $password,$credentials); + $validated = ($krbreturn == 1); + } + if (!$validated) { + &logthis('krb5: '.$user.', '.$contentpwd.', '. + &Authen::Krb5::error()); + } + } + return $validated; +} sub addline { my ($fname,$hostid,$ip,$newline)=@_; @@ -6924,7 +8224,9 @@ sub subscribe { # the metadata unless ($fname=~/\.meta$/) { &unsub("$fname.meta",$clientip); } $fname=~s/\/home\/httpd\/html\/res/raw/; - $fname="http://".&Apache::lonnet::hostname($perlvar{'lonHostID'})."/".$fname; + my $protocol = $Apache::lonnet::protocol{$perlvar{'lonHostID'}}; + $protocol = 'http' if ($protocol ne 'https'); + $fname=$protocol.'://'.&Apache::lonnet::hostname($perlvar{'lonHostID'})."/".$fname; $result="$fname\n"; } } else { @@ -6966,26 +8268,26 @@ sub change_unix_password { sub make_passwd_file { - my ($uname, $umode,$npass,$passfilename)=@_; + my ($uname,$udom,$umode,$npass,$passfilename,$action)=@_; my $result="ok"; if ($umode eq 'krb4' or $umode eq 'krb5') { { my $pf = IO::File->new(">$passfilename"); if ($pf) { print $pf "$umode:$npass\n"; + &update_passwd_history($uname,$udom,$umode,$action); } else { $result = "pass_file_failed_error"; } } } elsif ($umode eq 'internal') { - my $salt=time; - $salt=substr($salt,6,2); - my $ncpass=crypt($npass,$salt); + my $ncpass = &hash_passwd($udom,$npass); { &Debug("Creating internal auth"); my $pf = IO::File->new(">$passfilename"); if($pf) { print $pf "internal:$ncpass\n"; + &update_passwd_history($uname,$udom,$umode,$action); } else { $result = "pass_file_failed_error"; } @@ -6995,60 +8297,14 @@ sub make_passwd_file { my $pf = IO::File->new(">$passfilename"); if($pf) { print $pf "localauth:$npass\n"; + &update_passwd_history($uname,$udom,$umode,$action); } else { $result = "pass_file_failed_error"; } } } elsif ($umode eq 'unix') { - { - # - # Don't allow the creation of privileged accounts!!! that would - # be real bad!!! - # - my $uid = getpwnam($uname); - if((defined $uid) && ($uid == 0)) { - &logthis(">>>Attempted to create privilged account blocked"); - return "no_priv_account_error\n"; - } - - my $execpath ="$perlvar{'lonDaemons'}/"."lcuseradd"; - - my $lc_error_file = $execdir."/tmp/lcuseradd".$$.".status"; - { - &Debug("Executing external: ".$execpath); - &Debug("user = ".$uname.", Password =". $npass); - my $se = IO::File->new("|$execpath > $perlvar{'lonDaemons'}/logs/lcuseradd.log"); - print $se "$uname\n"; - print $se "$npass\n"; - print $se "$npass\n"; - print $se "$lc_error_file\n"; # Status -> unique file. - } - if (-r $lc_error_file) { - &Debug("Opening error file: $lc_error_file"); - my $error = IO::File->new("< $lc_error_file"); - my $useraddok = <$error>; - $error->close; - unlink($lc_error_file); - - chomp $useraddok; - - if($useraddok > 0) { - my $error_text = &lcuseraddstrerror($useraddok); - &logthis("Failed lcuseradd: $error_text"); - $result = "lcuseradd_failed:$error_text"; - } else { - my $pf = IO::File->new(">$passfilename"); - if($pf) { - print $pf "unix:\n"; - } else { - $result = "pass_file_failed_error"; - } - } - } else { - &Debug("Could not locate lcuseradd error: $lc_error_file"); - $result="bug_lcuseradd_no_output_file"; - } - } + &logthis(">>>Attempt to create unix account blocked -- unix auth not available for new users."); + $result="no_new_unix_accounts"; } elsif ($umode eq 'none') { { my $pf = IO::File->new("> $passfilename"); @@ -7082,7 +8338,7 @@ sub sethost { eq &Apache::lonnet::get_host_ip($hostid)) { $currenthostid =$hostid; $currentdomainid=&Apache::lonnet::host_domain($hostid); - &logthis("Setting hostid to $hostid, and domain to $currentdomainid"); +# &logthis("Setting hostid to $hostid, and domain to $currentdomainid"); } else { &logthis("Requested host id $hostid not an alias of ". $perlvar{'lonHostID'}." refusing connection"); @@ -7097,6 +8353,37 @@ sub version { return "version:$VERSION"; } +sub get_usersession_config { + my ($dom,$name) = @_; + my ($usersessionconf,$cached)=&Apache::lonnet::is_cached_new($name,$dom); + if (defined($cached)) { + return $usersessionconf; + } else { + my %domconfig = &Apache::lonnet::get_dom('configuration',['usersessions'],$dom); + if (ref($domconfig{'usersessions'}) eq 'HASH') { + &Apache::lonnet::do_cache_new($name,$dom,$domconfig{'usersessions'},3600); + return $domconfig{'usersessions'}; + } + } + return; +} + +sub get_usersearch_config { + my ($dom,$name) = @_; + my ($usersearchconf,$cached)=&Apache::lonnet::is_cached_new($name,$dom); + if (defined($cached)) { + return $usersearchconf; + } else { + my %domconfig = &Apache::lonnet::get_dom('configuration',['directorysrch'],$dom); + &Apache::lonnet::do_cache_new($name,$dom,$domconfig{'directorysrch'},3600); + return $domconfig{'directorysrch'}; + } + return; +} + +sub distro_and_arch { + return $dist.':'.$arch; +} # ----------------------------------- POD (plain old documentation, CPAN style) @@ -7305,7 +8592,7 @@ Place in B stores hash in namespace -=item rolesputy +=item rolesput put a role into a user's environment @@ -7832,5 +9119,7 @@ string. =back +=back + =cut