--- loncom/lond 2016/09/27 16:30:24 1.489.2.25
+++ loncom/lond 2013/07/25 19:11:07 1.501
@@ -2,7 +2,7 @@
# The LearningOnline Network
# lond "LON Daemon" Server (port "LOND" 5663)
#
-# $Id: lond,v 1.489.2.25 2016/09/27 16:30:24 raeburn Exp $
+# $Id: lond,v 1.501 2013/07/25 19:11:07 raeburn Exp $
#
# Copyright Michigan State University Board of Trustees
#
@@ -55,16 +55,13 @@ use LONCAPA::lonssl;
use Fcntl qw(:flock);
use Apache::lonnet;
use Mail::Send;
-use Crypt::Eksblowfish::Bcrypt;
-use Digest::SHA;
-use Encode;
my $DEBUG = 0; # Non zero to enable debug log entries.
my $status='';
my $lastlog='';
-my $VERSION='$Revision: 1.489.2.25 $'; #' stupid emacs
+my $VERSION='$Revision: 1.501 $'; #' stupid emacs
my $remoteVERSION;
my $currenthostid="default";
my $currentdomainid;
@@ -133,6 +130,25 @@ my @passwderrors = ("ok",
"pwchange_failure - lcpasswd Error filename is invalid");
+# The array below are lcuseradd error strings.:
+
+my $lastadderror = 13;
+my @adderrors = ("ok",
+ "User ID mismatch, lcuseradd must run as user www",
+ "lcuseradd Incorrect number of command line parameters must be 3",
+ "lcuseradd Incorrect number of stdinput lines, must be 3",
+ "lcuseradd Too many other simultaneous pwd changes in progress",
+ "lcuseradd User does not exist",
+ "lcuseradd Unable to make www member of users's group",
+ "lcuseradd Unable to su to root",
+ "lcuseradd Unable to set password",
+ "lcuseradd Username has invalid characters",
+ "lcuseradd Password has an invalid character",
+ "lcuseradd User already exists",
+ "lcuseradd Could not add user.",
+ "lcuseradd Password mismatch");
+
+
# This array are the errors from lcinstallfile:
my @installerrors = ("ok",
@@ -624,7 +640,7 @@ sub ConfigFileFromSelector {
# String to send to client ("ok" or "refused" if bad file).
#
sub PushFile {
- my $request = shift;
+ my $request = shift;
my ($command, $filename, $contents) = split(":", $request, 3);
&Debug("PushFile");
@@ -654,44 +670,6 @@ sub PushFile {
if($filename eq "host") {
$contents = AdjustHostContents($contents);
- } elsif ($filename eq 'dns_host' || $filename eq 'dns_domain') {
- if ($contents eq '') {
- &logthis(' Pushfile: unable to install '
- .$tablefile." - no data received from push. ");
- return 'error: push had no data';
- }
- if (&Apache::lonnet::get_host_ip($clientname)) {
- my $clienthost = &Apache::lonnet::hostname($clientname);
- if ($managers{$clientip} eq $clientname) {
- my $clientprotocol = $Apache::lonnet::protocol{$clientname};
- $clientprotocol = 'http' if ($clientprotocol ne 'https');
- my $url = '/adm/'.$filename;
- $url =~ s{_}{/};
- my $ua=new LWP::UserAgent;
- $ua->timeout(60);
- my $request=new HTTP::Request('GET',"$clientprotocol://$clienthost$url");
- my $response=$ua->request($request);
- if ($response->is_error()) {
- &logthis(' Pushfile: unable to install '
- .$tablefile." - error attempting to pull data. ");
- return 'error: pull failed';
- } else {
- my $result = $response->content;
- chomp($result);
- unless ($result eq $contents) {
- &logthis(' Pushfile: unable to install '
- .$tablefile." - pushed data and pulled data differ. ");
- my $pushleng = length($contents);
- my $pullleng = length($result);
- if ($pushleng != $pullleng) {
- return "error: $pushleng vs $pullleng bytes";
- } else {
- return "error: mismatch push and pull";
- }
- }
- }
- }
- }
}
# Install the new file:
@@ -1425,20 +1403,6 @@ sub du2_handler {
# selected directory the filename followed by the full output of
# the stat function is returned. The returned info for each
# file are separated by ':'. The stat fields are separated by &'s.
-#
-# If the requested path contains /../ or is:
-#
-# 1. for a directory, and the path does not begin with one of:
-# (a) /home/httpd/html/res/
-# (b) /home/httpd/html/res/userfiles/
-# (c) /home/httpd/lonUsers//<1>/<2>/<3>//userfiles
-# or is:
-#
-# 2. for a file, and the path (after prepending) does not begin with:
-# /home/httpd/lonUsers//<1>/<2>/<3>//
-#
-# the response will be "refused".
-#
# Parameters:
# $cmd - The command that dispatched us (ls).
# $ulsdir - The directory path to list... I'm not sure what this
@@ -1460,17 +1424,8 @@ sub ls_handler {
my $rights;
my $ulsout='';
my $ulsfn;
- if ($ulsdir =~m{/\.\./}) {
- &Failure($client,"refused\n",$userinput);
- return 1;
- }
if (-e $ulsdir) {
if(-d $ulsdir) {
- unless (($ulsdir =~ m{/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) ||
- ($ulsdir =~ m{/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_username/userfiles/})) {
- &Failure($client,"refused\n",$userinput);
- return 1;
- }
if (opendir(LSDIR,$ulsdir)) {
while ($ulsfn=readdir(LSDIR)) {
undef($obs);
@@ -1494,10 +1449,6 @@ sub ls_handler {
closedir(LSDIR);
}
} else {
- unless ($ulsdir =~ m{/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_username/}) {
- &Failure($client,"refused\n",$userinput);
- return 1;
- }
my @ulsstats=stat($ulsdir);
$ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
}
@@ -1522,20 +1473,6 @@ sub ls_handler {
# selected directory the filename followed by the full output of
# the stat function is returned. The returned info for each
# file are separated by ':'. The stat fields are separated by &'s.
-#
-# If the requested path contains /../ or is:
-#
-# 1. for a directory, and the path does not begin with one of:
-# (a) /home/httpd/html/res/
-# (b) /home/httpd/html/res/userfiles/
-# (c) /home/httpd/lonUsers//<1>/<2>/<3>//userfiles
-# or is:
-#
-# 2. for a file, and the path (after prepending) does not begin with:
-# /home/httpd/lonUsers//<1>/<2>/<3>//
-#
-# the response will be "refused".
-#
# Parameters:
# $cmd - The command that dispatched us (ls).
# $ulsdir - The directory path to list... I'm not sure what this
@@ -1556,17 +1493,8 @@ sub ls2_handler {
my $rights;
my $ulsout='';
my $ulsfn;
- if ($ulsdir =~m{/\.\./}) {
- &Failure($client,"refused\n",$userinput);
- return 1;
- }
if (-e $ulsdir) {
if(-d $ulsdir) {
- unless (($ulsdir =~ m{/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) ||
- ($ulsdir =~ m{/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_username/userfiles/})) {
- &Failure($client,"refused\n","$userinput");
- return 1;
- }
if (opendir(LSDIR,$ulsdir)) {
while ($ulsfn=readdir(LSDIR)) {
undef($obs);
@@ -1591,10 +1519,6 @@ sub ls2_handler {
closedir(LSDIR);
}
} else {
- unless ($ulsdir =~ m{/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_username/}) {
- &Failure($client,"refused\n",$userinput);
- return 1;
- }
my @ulsstats=stat($ulsdir);
$ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
}
@@ -1611,22 +1535,6 @@ sub ls2_handler {
# selected directory the filename followed by the full output of
# the stat function is returned. The returned info for each
# file are separated by ':'. The stat fields are separated by &'s.
-#
-# If the requested path (after prepending) contains /../ or is:
-#
-# 1. for a directory, and the path does not begin with one of:
-# (a) /home/httpd/html/res/
-# (b) /home/httpd/html/res/userfiles/
-# (c) /home/httpd/lonUsers//<1>/<2>/<3>//userfiles
-# (d) /home/httpd/html/priv// and client is the homeserver
-#
-# or is:
-#
-# 2. for a file, and the path (after prepending) does not begin with:
-# /home/httpd/lonUsers//<1>/<2>/<3>//
-#
-# the response will be "refused".
-#
# Parameters:
# $cmd - The command that dispatched us (ls).
# $tail - The tail of the request that invoked us.
@@ -1666,12 +1574,22 @@ sub ls3_handler {
}
my $dir_root = $perlvar{'lonDocRoot'};
- if (($getpropath) || ($getuserdir)) {
+ if ($getpropath) {
if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) {
$dir_root = &propath($udom,$uname);
$dir_root =~ s/\/$//;
} else {
- &Failure($client,"refused\n",$userinput);
+ &Failure($client,"refused\n","$cmd:$tail");
+ return 1;
+ }
+ } elsif ($getuserdir) {
+ if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) {
+ my $subdir=$uname.'__';
+ $subdir =~ s/(.)(.)(.).*/$1\/$2\/$3/;
+ $dir_root = $Apache::lonnet::perlvar{'lonUsersDir'}
+ ."/$udom/$subdir/$uname";
+ } else {
+ &Failure($client,"refused\n","$cmd:$tail");
return 1;
}
} elsif ($alternate_root ne '') {
@@ -1684,28 +1602,12 @@ sub ls3_handler {
$ulsdir = $dir_root.'/'.$ulsdir;
}
}
- if ($ulsdir =~m{/\.\./}) {
- &Failure($client,"refused\n",$userinput);
- return 1;
- }
- my $islocal;
- my @machine_ids = &Apache::lonnet::current_machine_ids();
- if (grep(/^\Q$clientname\E$/,@machine_ids)) {
- $islocal = 1;
- }
my $obs;
my $rights;
my $ulsout='';
my $ulsfn;
if (-e $ulsdir) {
if(-d $ulsdir) {
- unless (($getpropath) || ($getuserdir) ||
- ($ulsdir =~ m{/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) ||
- ($ulsdir =~ m{/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_username/userfiles/}) ||
- (($ulsdir =~ m{/home/httpd/html/priv/$LONCAPA::match_domain/}) && ($islocal))) {
- &Failure($client,"refused\n",$userinput);
- return 1;
- }
if (opendir(LSDIR,$ulsdir)) {
while ($ulsfn=readdir(LSDIR)) {
undef($obs);
@@ -1730,11 +1632,6 @@ sub ls3_handler {
closedir(LSDIR);
}
} else {
- unless (($getpropath) || ($getuserdir) ||
- ($ulsdir =~ m{/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_username/})) {
- &Failure($client,"refused\n",$userinput);
- return 1;
- }
my @ulsstats=stat($ulsdir);
$ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
}
@@ -1807,14 +1704,8 @@ sub read_lonnet_global {
sub server_devalidatecache_handler {
my ($cmd,$tail,$client) = @_;
my $userinput = "$cmd:$tail";
- my $items = &unescape($tail);
- my @cached = split(/\&/,$items);
- foreach my $key (@cached) {
- if ($key =~ /:/) {
- my ($name,$id) = map { &unescape($_); } split(/:/,$key);
- &Apache::lonnet::devalidate_cache_new($name,$id);
- }
- }
+ my ($name,$id) = map { &unescape($_); } split(/:/,$tail);
+ &Apache::lonnet::devalidate_cache_new($name,$id);
my $result = 'ok';
&Reply($client,\$result,$userinput);
return 1;
@@ -2016,12 +1907,8 @@ sub authenticate_handler {
if (ref($hostedsession) eq 'HASH') {
$hosted = $hostedsession->{'hosted'};
}
- my $loncaparev = $clientversion;
- if ($loncaparev eq '') {
- $loncaparev = $Apache::lonnet::loncaparevs{$clientname};
- }
$canhost = &Apache::lonnet::can_host_session($udom,$clientname,
- $loncaparev,
+ $clientversion,
$remote,$hosted);
}
}
@@ -2101,14 +1988,15 @@ sub change_password_handler {
my ($howpwd,$contentpwd)=split(/:/,$realpasswd);
if ($howpwd eq 'internal') {
&Debug("internal auth");
- my $ncpass = &hash_passwd($udom,$npass);
+ my $salt=time;
+ $salt=substr($salt,6,2);
+ my $ncpass=crypt($npass,$salt);
if(&rewrite_password_file($udom, $uname, "internal:$ncpass")) {
my $msg="Result of password change for $uname: pwchange_success";
if ($lonhost) {
$msg .= " - request originated from: $lonhost";
}
&logthis($msg);
- &update_passwd_history($uname,$udom,$howpwd,$context);
&Reply($client, "ok\n", $userinput);
} else {
&logthis("Unable to open $uname passwd "
@@ -2117,9 +2005,6 @@ sub change_password_handler {
}
} elsif ($howpwd eq 'unix' && $context ne 'reset_by_email') {
my $result = &change_unix_password($uname, $npass);
- if ($result eq 'ok') {
- &update_passwd_history($uname,$udom,$howpwd,$context);
- }
&logthis("Result of password change for $uname: ".
$result);
&Reply($client, \$result, $userinput);
@@ -2142,42 +2027,6 @@ sub change_password_handler {
}
®ister_handler("passwd", \&change_password_handler, 1, 1, 0);
-sub hash_passwd {
- my ($domain,$plainpass,@rest) = @_;
- my ($salt,$cost);
- if (@rest) {
- $cost = $rest[0];
- # salt is first 22 characters, base-64 encoded by bcrypt
- my $plainsalt = substr($rest[1],0,22);
- $salt = Crypt::Eksblowfish::Bcrypt::de_base64($plainsalt);
- } else {
- my $defaultcost;
- my %domconfig =
- &Apache::lonnet::get_dom('configuration',['password'],$domain);
- if (ref($domconfig{'password'}) eq 'HASH') {
- $defaultcost = $domconfig{'password'}{'cost'};
- }
- if (($defaultcost eq '') || ($defaultcost =~ /D/)) {
- $cost = 10;
- } else {
- $cost = $defaultcost;
- }
- # Generate random 16-octet base64 salt
- $salt = "";
- $salt .= pack("C", int rand(256)) for 1..16;
- }
- my $hash = &Crypt::Eksblowfish::Bcrypt::bcrypt_hash({
- key_nul => 1,
- cost => $cost,
- salt => $salt,
- }, Digest::SHA::sha512(Encode::encode('UTF-8',$plainpass)));
-
- my $result = join("!", "", "bcrypt", sprintf("%02d",$cost),
- &Crypt::Eksblowfish::Bcrypt::en_base64($salt).
- &Crypt::Eksblowfish::Bcrypt::en_base64($hash));
- return $result;
-}
-
#
# Create a new user. User in this case means a lon-capa user.
# The user must either already exist in some authentication realm
@@ -2221,8 +2070,7 @@ sub add_user_handler {
."makeuser";
}
unless ($fperror) {
- my $result=&make_passwd_file($uname,$udom,$umode,$npass,
- $passfilename,'makeuser');
+ my $result=&make_passwd_file($uname,$udom,$umode,$npass, $passfilename);
&Reply($client,\$result, $userinput); #BUGBUG - could be fail
} else {
&Failure($client, \$fperror, $userinput);
@@ -2283,30 +2131,36 @@ sub change_authentication_handler {
my $passfilename = &password_path($udom, $uname);
if ($passfilename) { # Not allowed to create a new user!!
# If just changing the unix passwd. need to arrange to run
- # passwd since otherwise make_passwd_file will fail as
- # creation of unix authenticated users is no longer supported
- # except from the command line, when running make_domain_coordinator.pl
+ # passwd since otherwise make_passwd_file will run
+ # lcuseradd which fails if an account already exists
+ # (to prevent an unscrupulous LONCAPA admin from stealing
+ # an existing account by overwriting it as a LonCAPA account).
if(($oldauth =~/^unix/) && ($umode eq "unix")) {
my $result = &change_unix_password($uname, $npass);
&logthis("Result of password change for $uname: ".$result);
if ($result eq "ok") {
- &update_passwd_history($uname,$udom,$umode,'changeuserauth');
&Reply($client, \$result);
} else {
&Failure($client, \$result);
}
} else {
- my $result=&make_passwd_file($uname,$udom,$umode,$npass,
- $passfilename,'changeuserauth');
+ my $result=&make_passwd_file($uname,$udom,$umode,$npass,$passfilename);
#
# If the current auth mode is internal, and the old auth mode was
# unix, or krb*, and the user is an author for this domain,
# re-run manage_permissions for that role in order to be able
# to take ownership of the construction space back to www:www
#
-
-
+
+
+ if( (($oldauth =~ /^unix/) && ($umode eq "internal")) ||
+ (($oldauth =~ /^internal/) && ($umode eq "unix")) ) {
+ if(&is_author($udom, $uname)) {
+ &Debug(" Need to manage author permissions...");
+ &manage_permissions("/$udom/_au", $udom, $uname, "$umode:");
+ }
+ }
&Reply($client, \$result, $userinput);
}
@@ -2319,17 +2173,6 @@ sub change_authentication_handler {
}
®ister_handler("changeuserauth", \&change_authentication_handler, 1,1, 0);
-sub update_passwd_history {
- my ($uname,$udom,$umode,$context) = @_;
- my $proname=&propath($udom,$uname);
- my $now = time;
- if (open(my $fh,">>$proname/passwd.log")) {
- print $fh "$now:$umode:$context\n";
- close($fh);
- }
- return;
-}
-
#
# Determines if this is the home server for a user. The home server
# for a user will have his/her lon-capa passwd file. Therefore all we need
@@ -2581,20 +2424,11 @@ sub remove_user_file_handler {
if (-e $file) {
#
# If the file is a regular file unlink is fine...
- # However it's possible the client wants a dir
- # removed, in which case rmdir is more appropriate
- # Note: rmdir will only remove an empty directory.
+ # However it's possible the client wants a dir.
+ # removed, in which case rmdir is more approprate:
#
if (-f $file){
unlink($file);
- # for html files remove the associated .bak file
- # which may have been created by the editor.
- if ($ufile =~ m{^((docs|supplemental)/(?:\d+|default)/\d+(?:|/.+)/)[^/]+\.x?html?$}i) {
- my $path = $1;
- if (-e $file.'.bak') {
- unlink($file.'.bak');
- }
- }
} elsif(-d $file) {
rmdir($file);
}
@@ -2957,10 +2791,6 @@ sub newput_user_profile_entry {
foreach my $pair (@pairs) {
my ($key,$value)=split(/=/,$pair);
if (exists($hashref->{$key})) {
- if (!&untie_user_hash($hashref)) {
- &logthis("error: ".($!+0)." untie (GDBM) failed ".
- "while attempting newput - early out as key exists");
- }
&Failure($client, "key_exists: ".$key."\n",$userinput);
return 1;
}
@@ -3364,6 +3194,17 @@ sub get_profile_keys {
sub dump_profile_database {
my ($cmd, $tail, $client) = @_;
+ my $res = LONCAPA::Lond::dump_profile_database($tail);
+
+ if ($res =~ /^error:/) {
+ Failure($client, \$res, "$cmd:$tail");
+ } else {
+ Reply($client, \$res, "$cmd:$tail");
+ }
+
+ return 1;
+
+ #TODO remove
my $userinput = "$cmd:$tail";
my ($udom,$uname,$namespace) = split(/:/,$tail);
@@ -3443,11 +3284,11 @@ sub dump_with_regexp {
my ($cmd, $tail, $client) = @_;
my $res = LONCAPA::Lond::dump_with_regexp($tail, $clientversion);
-
+
if ($res =~ /^error:/) {
- &Failure($client, \$res, "$cmd:$tail");
+ Failure($client, \$res, "$cmd:$tail");
} else {
- &Reply($client, \$res, "$cmd:$tail");
+ Reply($client, \$res, "$cmd:$tail");
}
return 1;
@@ -3464,9 +3305,6 @@ sub dump_with_regexp {
# namespace - Name of the database being modified
# rid - Resource keyword to modify.
# what - new value associated with rid.
-# laststore - (optional) version=timestamp
-# for most recent transaction for rid
-# in namespace, when cstore was called
#
# $client - Socket open on the client.
#
@@ -3475,47 +3313,23 @@ sub dump_with_regexp {
# 1 (keep on processing).
# Side-Effects:
# Writes to the client
-# Successful storage will cause either 'ok', or, if $laststore was included
-# in the tail of the request, and the version number for the last transaction
-# is larger than the version in $laststore, delay:$numtrans , where $numtrans
-# is the number of store evevnts recorded for rid in namespace since
-# lonnet::store() was called by the client.
-#
sub store_handler {
my ($cmd, $tail, $client) = @_;
my $userinput = "$cmd:$tail";
- chomp($tail);
- my ($udom,$uname,$namespace,$rid,$what,$laststore) =split(/:/,$tail);
+ my ($udom,$uname,$namespace,$rid,$what) =split(/:/,$tail);
if ($namespace ne 'roles') {
+ chomp($what);
my @pairs=split(/\&/,$what);
my $hashref = &tie_user_hash($udom, $uname, $namespace,
&GDBM_WRCREAT(), "S",
"$rid:$what");
if ($hashref) {
my $now = time;
- my $numtrans;
- if ($laststore) {
- my ($previousversion,$previoustime) = split(/\=/,$laststore);
- my ($lastversion,$lasttime) = (0,0);
- $lastversion = $hashref->{"version:$rid"};
- if ($lastversion) {
- $lasttime = $hashref->{"$lastversion:$rid:timestamp"};
- }
- if (($previousversion) && ($previousversion !~ /\D/)) {
- if (($lastversion > $previousversion) && ($lasttime >= $previoustime)) {
- $numtrans = $lastversion - $previousversion;
- }
- } elsif ($lastversion) {
- $numtrans = $lastversion;
- }
- if ($numtrans) {
- $numtrans =~ s/D//g;
- }
- }
-
+ my @previouskeys=split(/&/,$hashref->{"keys:$rid"});
+ my $key;
$hashref->{"version:$rid"}++;
my $version=$hashref->{"version:$rid"};
my $allkeys='';
@@ -3528,11 +3342,7 @@ sub store_handler {
$allkeys.='timestamp';
$hashref->{"$version:keys:$rid"}=$allkeys;
if (&untie_user_hash($hashref)) {
- my $msg = 'ok';
- if ($numtrans) {
- $msg = 'delay:'.$numtrans;
- }
- &Reply($client, "$msg\n", $userinput);
+ &Reply($client, "ok\n", $userinput);
} else {
&Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
"while attempting store\n", $userinput);
@@ -4048,9 +3858,7 @@ sub put_course_id_hash_handler {
# creationcontext - include courses created in specified context
#
# domcloner - flag to indicate if user can create CCs in course's domain.
-# If so, ability to clone course is automatic.
-# hasuniquecode - filter by courses for which a six character unique code has
-# been set.
+# If so, ability to clone course is automatic.
#
# $client - The socket open on the client.
# Returns:
@@ -4059,12 +3867,23 @@ sub put_course_id_hash_handler {
# a reply is written to $client.
sub dump_course_id_handler {
my ($cmd, $tail, $client) = @_;
+
+ my $res = LONCAPA::Lond::dump_course_id_handler($tail);
+ if ($res =~ /^error:/) {
+ Failure($client, \$res, "$cmd:$tail");
+ } else {
+ Reply($client, \$res, "$cmd:$tail");
+ }
+
+ return 1;
+
+ #TODO remove
my $userinput = "$cmd:$tail";
my ($udom,$since,$description,$instcodefilter,$ownerfilter,$coursefilter,
$typefilter,$regexp_ok,$rtn_as_hash,$selfenrollonly,$catfilter,$showhidden,
$caller,$cloner,$cc_clone_list,$cloneonly,$createdbefore,$createdafter,
- $creationcontext,$domcloner,$hasuniquecode) =split(/:/,$tail);
+ $creationcontext,$domcloner) =split(/:/,$tail);
my $now = time;
my ($cloneruname,$clonerudom,%cc_clone);
if (defined($description)) {
@@ -4137,9 +3956,6 @@ sub dump_course_id_handler {
} else {
$creationcontext = '.';
}
- unless ($hasuniquecode) {
- $hasuniquecode = '.';
- }
my $unpack = 1;
if ($description eq '.' && $instcodefilter eq '.' && $ownerfilter eq '.' &&
$typefilter eq '.') {
@@ -4228,9 +4044,6 @@ sub dump_course_id_handler {
$selfenroll_end = $items->{'selfenroll_end_date'};
$created = $items->{'created'};
$context = $items->{'context'};
- if ($hasuniquecode ne '.') {
- next unless ($items->{'uniquecode'});
- }
if ($selfenrollonly) {
next if (!$selfenroll_types);
if (($selfenroll_end > 0) && ($selfenroll_end <= $now)) {
@@ -4665,7 +4478,7 @@ sub get_id_handler {
# Returns:
# 1 - Continue processing
# 0 - Exit server.
-#
+#
#
sub del_id_handler {
@@ -5411,59 +5224,13 @@ sub create_auto_enroll_password_handler
®ister_handler("autocreatepassword", \&create_auto_enroll_password_handler,
0, 1, 0);
-sub auto_export_grades_handler {
- my ($cmd, $tail, $client) = @_;
- my $userinput = "$cmd:$tail";
- my ($cdom,$cnum,$info,$data) = split(/:/,$tail);
- my $inforef = &Apache::lonnet::thaw_unescape($info);
- my $dataref = &Apache::lonnet::thaw_unescape($data);
- my ($outcome,$result);;
- eval {
- local($SIG{__DIE__})='DEFAULT';
- my %rtnhash;
- $outcome=&localenroll::export_grades($cdom,$cnum,$inforef,$dataref,\%rtnhash);
- if ($outcome eq 'ok') {
- foreach my $key (keys(%rtnhash)) {
- $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rtnhash{$key}).'&';
- }
- $result =~ s/\&$//;
- }
- };
- if (!$@) {
- if ($outcome eq 'ok') {
- if ($cipher) {
- my $cmdlength=length($result);
- $result.=" ";
- my $encresult='';
- for (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {
- $encresult.= unpack("H16",
- $cipher->encrypt(substr($result,
- $encidx,
- 8)));
- }
- &Reply( $client, "enc:$cmdlength:$encresult\n", $userinput);
- } else {
- &Failure( $client, "error:no_key\n", $userinput);
- }
- } else {
- &Reply($client, "$outcome\n", $userinput);
- }
- } else {
- &Failure($client,"export_error\n",$userinput);
- }
- return 1;
-}
-®ister_handler("autoexportgrades", \&auto_export_grades_handler,
- 0, 1, 0);
-
-
# Retrieve and remove temporary files created by/during autoenrollment.
#
# Formal Parameters:
# $cmd - The command that got us dispatched.
# $tail - The tail of the command. In our case this is a colon
# separated list that will be split into:
-# $filename - The name of the file to retrieve.
+# $filename - The name of the file to remove.
# The filename is given as a path relative to
# the LonCAPA temp file directory.
# $client - Socket open on the client.
@@ -5477,11 +5244,7 @@ sub retrieve_auto_file_handler {
my ($filename) = split(/:/, $tail);
my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename;
- if ($filename =~m{/\.\./}) {
- &Failure($client, "refused\n", $userinput);
- } elsif ($filename !~ /^$LONCAPA::match_domain\_$LONCAPA::match_courseid\_.+_classlist\.xml$/) {
- &Failure($client, "refused\n", $userinput);
- } elsif ( (-e $source) && ($filename ne '') ) {
+ if ( (-e $source) && ($filename ne '') ) {
my $reply = '';
if (open(my $fh,$source)) {
while (<$fh>) {
@@ -5513,7 +5276,7 @@ sub crsreq_checks_handler {
my $userinput = "$cmd:$tail";
my $dom = $tail;
my $result;
- my @reqtypes = ('official','unofficial','community','textbook');
+ my @reqtypes = ('official','unofficial','community');
eval {
local($SIG{__DIE__})='DEFAULT';
my %validations;
@@ -5540,20 +5303,19 @@ sub crsreq_checks_handler {
sub validate_crsreq_handler {
my ($cmd, $tail, $client) = @_;
my $userinput = "$cmd:$tail";
- my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist,$customdata) = split(/:/, $tail);
+ my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist) = split(/:/, $tail);
$instcode = &unescape($instcode);
$owner = &unescape($owner);
$crstype = &unescape($crstype);
$inststatuslist = &unescape($inststatuslist);
$instcode = &unescape($instcode);
$instseclist = &unescape($instseclist);
- my $custominfo = &Apache::lonnet::thaw_unescape($customdata);
my $outcome;
eval {
local($SIG{__DIE__})='DEFAULT';
$outcome = &localenroll::validate_crsreq($dom,$owner,$crstype,
$inststatuslist,$instcode,
- $instseclist,$custominfo);
+ $instseclist);
};
if (!$@) {
&Reply($client, \$outcome, $userinput);
@@ -5564,53 +5326,6 @@ sub validate_crsreq_handler {
}
®ister_handler("autocrsreqvalidation", \&validate_crsreq_handler, 0, 1, 0);
-sub crsreq_update_handler {
- my ($cmd, $tail, $client) = @_;
- my $userinput = "$cmd:$tail";
- my ($cdom,$cnum,$crstype,$action,$ownername,$ownerdomain,$fullname,$title,$code,
- $accessstart,$accessend,$infohashref) =
- split(/:/, $tail);
- $crstype = &unescape($crstype);
- $action = &unescape($action);
- $ownername = &unescape($ownername);
- $ownerdomain = &unescape($ownerdomain);
- $fullname = &unescape($fullname);
- $title = &unescape($title);
- $code = &unescape($code);
- $accessstart = &unescape($accessstart);
- $accessend = &unescape($accessend);
- my $incoming = &Apache::lonnet::thaw_unescape($infohashref);
- my ($result,$outcome);
- eval {
- local($SIG{__DIE__})='DEFAULT';
- my %rtnhash;
- $outcome = &localenroll::crsreq_updates($cdom,$cnum,$crstype,$action,
- $ownername,$ownerdomain,$fullname,
- $title,$code,$accessstart,$accessend,
- $incoming,\%rtnhash);
- if ($outcome eq 'ok') {
- my @posskeys = qw(createdweb createdmsg createdcustomized createdactions queuedweb queuedmsg formitems reviewweb validationjs onload javascript);
- foreach my $key (keys(%rtnhash)) {
- if (grep(/^\Q$key\E/,@posskeys)) {
- $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rtnhash{$key}).'&';
- }
- }
- $result =~ s/\&$//;
- }
- };
- if (!$@) {
- if ($outcome eq 'ok') {
- &Reply($client, \$result, $userinput);
- } else {
- &Reply($client, "format_error\n", $userinput);
- }
- } else {
- &Failure($client,"unknown_cmd\n",$userinput);
- }
- return 1;
-}
-®ister_handler("autocrsrequpdate", \&crsreq_update_handler, 0, 1, 0);
-
#
# Read and retrieve institutional code format (for support form).
# Formal Parameters:
@@ -6318,6 +6033,18 @@ sub lcpasswdstrerror {
}
}
+#
+# Convert an error return code from lcuseradd to a string value:
+#
+sub lcuseraddstrerror {
+ my $ErrorCode = shift;
+ if(($ErrorCode < 0) || ($ErrorCode > $lastadderror)) {
+ return "lcuseradd - Unrecognized error code: ".$ErrorCode;
+ } else {
+ return $adderrors[$ErrorCode];
+ }
+}
+
# grabs exception and records it to log before exiting
sub catchexception {
my ($error)=@_;
@@ -6558,6 +6285,9 @@ sub Debug {
# reply - Text to send to client.
# request - Original request from client.
#
+#NOTE $reply must be terminated by exactly *one* \n. If $reply is a reference
+#this is done automatically ($$reply must not contain any \n in this case).
+#If $reply is a string the caller has to ensure this.
sub Reply {
my ($fd, $reply, $request) = @_;
if (ref($reply)) {
@@ -6803,28 +6533,11 @@ sub make_new_child {
# my $tmpsnum=0; # Now global
#---------------------------------------------------- kerberos 5 initialization
&Authen::Krb5::init_context();
-
- my $no_ets;
- if ($dist =~ /^(?:centos|rhes|scientific)(\d+)$/) {
- if ($1 >= 7) {
- $no_ets = 1;
- }
- } elsif ($dist =~ /^suse(\d+\.\d+)$/) {
- if (($1 eq '9.3') || ($1 >= 12.2)) {
- $no_ets = 1;
- }
- } elsif ($dist =~ /^sles(\d+)$/) {
- if ($1 > 11) {
- $no_ets = 1;
- }
- } elsif ($dist =~ /^fedora(\d+)$/) {
- if ($1 < 7) {
- $no_ets = 1;
- }
- }
- unless ($no_ets) {
- &Authen::Krb5::init_ets();
- }
+ unless (($dist eq 'fedora5') || ($dist eq 'fedora4') ||
+ ($dist eq 'fedora6') || ($dist eq 'suse9.3') ||
+ ($dist eq 'suse12.2') || ($dist eq 'suse12.3')) {
+ &Authen::Krb5::init_ets();
+ }
&status('Accepted connection');
# =============================================================================
@@ -6867,13 +6580,14 @@ sub make_new_child {
#
# If the remote is attempting a local init... give that a try:
#
+ logthis("remotereq: $remotereq");
(my $i, my $inittype, $clientversion) = split(/:/, $remotereq);
- # For LON-CAPA 2.9, the client session will have sent its LON-CAPA
- # version when initiating the connection. For LON-CAPA 2.8 and older,
- # the version is retrieved from the global %loncaparevs in lonnet.pm.
- # $clientversion contains path to keyfile if $inittype eq 'local'
- # it's overridden below in this case
- $clientversion ||= $Apache::lonnet::loncaparevs{$clientname};
+ # For LON-CAPA 2.9, the client session will have sent its LON-CAPA
+ # version when initiating the connection. For LON-CAPA 2.8 and older,
+ # the version is retrieved from the global %loncaparevs in lonnet.pm.
+ # $clientversion contains path to keyfile if $inittype eq 'local'
+ # it's overridden below in this case
+ $clientversion ||= $Apache::lonnet::loncaparevs{$clientname};
# If the connection type is ssl, but I didn't get my
# certificate files yet, then I'll drop back to
@@ -7207,18 +6921,7 @@ sub validate_user {
}
if ($howpwd ne 'nouser') {
if($howpwd eq "internal") { # Encrypted is in local password file.
- if (length($contentpwd) == 13) {
- $validated = (crypt($password,$contentpwd) eq $contentpwd);
- if ($validated) {
- my $ncpass = &hash_passwd($domain,$password);
- if (&rewrite_password_file($domain,$user,"$howpwd:$ncpass")) {
- &update_passwd_history($user,$domain,$howpwd,'conversion');
- &logthis("Validated password hashed with bcrypt for $user:$domain");
- }
- }
- } else {
- $validated = &check_internal_passwd($password,$contentpwd,$domain);
- }
+ $validated = (crypt($password, $contentpwd) eq $contentpwd);
}
elsif ($howpwd eq "unix") { # User is a normal unix user.
$contentpwd = (getpwnam($user))[1];
@@ -7286,39 +6989,6 @@ sub validate_user {
return $validated;
}
-sub check_internal_passwd {
- my ($plainpass,$stored,$domain) = @_;
- my (undef,$method,@rest) = split(/!/,$stored);
- if ($method eq "bcrypt") {
- my $result = &hash_passwd($domain,$plainpass,@rest);
- if ($result ne $stored) {
- return 0;
- }
- # Upgrade to a larger number of rounds if necessary
- my $defaultcost;
- my %domconfig =
- &Apache::lonnet::get_dom('configuration',['password'],$domain);
- if (ref($domconfig{'password'}) eq 'HASH') {
- $defaultcost = $domconfig{'password'}{'cost'};
- }
- if (($defaultcost eq '') || ($defaultcost =~ /D/)) {
- $defaultcost = 10;
- }
- return 1 unless($rest[0]<$defaultcost);
- }
- return 0;
-}
-
-sub get_last_authchg {
- my ($domain,$user) = @_;
- my $lastmod;
- my $logname = &propath($domain,$user).'/passwd.log';
- if (-e "$logname") {
- $lastmod = (stat("$logname"))[9];
- }
- return $lastmod;
-}
-
sub krb4_authen {
my ($password,$null,$user,$contentpwd) = @_;
my $validated = 0;
@@ -7634,26 +7304,26 @@ sub change_unix_password {
sub make_passwd_file {
- my ($uname,$udom,$umode,$npass,$passfilename,$action)=@_;
+ my ($uname,$udom,$umode,$npass,$passfilename)=@_;
my $result="ok";
if ($umode eq 'krb4' or $umode eq 'krb5') {
{
my $pf = IO::File->new(">$passfilename");
if ($pf) {
print $pf "$umode:$npass\n";
- &update_passwd_history($uname,$udom,$umode,$action);
} else {
$result = "pass_file_failed_error";
}
}
} elsif ($umode eq 'internal') {
- my $ncpass = &hash_passwd($udom,$npass);
+ my $salt=time;
+ $salt=substr($salt,6,2);
+ my $ncpass=crypt($npass,$salt);
{
&Debug("Creating internal auth");
my $pf = IO::File->new(">$passfilename");
if($pf) {
print $pf "internal:$ncpass\n";
- &update_passwd_history($uname,$udom,$umode,$action);
} else {
$result = "pass_file_failed_error";
}
@@ -7663,14 +7333,61 @@ sub make_passwd_file {
my $pf = IO::File->new(">$passfilename");
if($pf) {
print $pf "localauth:$npass\n";
- &update_passwd_history($uname,$udom,$umode,$action);
} else {
$result = "pass_file_failed_error";
}
}
} elsif ($umode eq 'unix') {
- &logthis(">>>Attempt to create unix account blocked -- unix auth not available for new users.");
- $result="no_new_unix_accounts";
+ {
+ #
+ # Don't allow the creation of privileged accounts!!! that would
+ # be real bad!!!
+ #
+ my $uid = getpwnam($uname);
+ if((defined $uid) && ($uid == 0)) {
+ &logthis(">>>Attempt to create privileged account blocked");
+ return "no_priv_account_error\n";
+ }
+
+ my $execpath ="$perlvar{'lonDaemons'}/"."lcuseradd";
+
+ my $lc_error_file = $execdir."/tmp/lcuseradd".$$.".status";
+ {
+ &Debug("Executing external: ".$execpath);
+ &Debug("user = ".$uname.", Password =". $npass);
+ my $se = IO::File->new("|$execpath > $perlvar{'lonDaemons'}/logs/lcuseradd.log");
+ print $se "$uname\n";
+ print $se "$udom\n";
+ print $se "$npass\n";
+ print $se "$npass\n";
+ print $se "$lc_error_file\n"; # Status -> unique file.
+ }
+ if (-r $lc_error_file) {
+ &Debug("Opening error file: $lc_error_file");
+ my $error = IO::File->new("< $lc_error_file");
+ my $useraddok = <$error>;
+ $error->close;
+ unlink($lc_error_file);
+
+ chomp $useraddok;
+
+ if($useraddok > 0) {
+ my $error_text = &lcuseraddstrerror($useraddok);
+ &logthis("Failed lcuseradd: $error_text");
+ $result = "lcuseradd_failed:$error_text";
+ } else {
+ my $pf = IO::File->new(">$passfilename");
+ if($pf) {
+ print $pf "unix:\n";
+ } else {
+ $result = "pass_file_failed_error";
+ }
+ }
+ } else {
+ &Debug("Could not locate lcuseradd error: $lc_error_file");
+ $result="bug_lcuseradd_no_output_file";
+ }
+ }
} elsif ($umode eq 'none') {
{
my $pf = IO::File->new("> $passfilename");
@@ -7735,6 +7452,8 @@ sub get_usersession_config {
}
+
+
sub distro_and_arch {
return $dist.':'.$arch;
}
@@ -8063,6 +7782,8 @@ Authen::Krb5
=head1 COREQUISITES
+none
+
=head1 OSNAMES
linux
@@ -8150,9 +7871,9 @@ or the CA's certificate in the call to l
is the textual reason this failed. Usual reasons:
=over 2
-
+
=item Apache config file for loncapa incorrect:
-
+
one of the variables
lonCertificateDirectory, lonnetCertificateAuthority, or lonnetCertificate
undefined or incorrect
@@ -8271,7 +7992,7 @@ Could not rewrite the
internal password file for a user
=item Result of password change for :
-
+
A unix password change for was attempted
and the pipe returned
@@ -8300,7 +8021,7 @@ lond has been asked to exit by its clien
client systemand is the full exit command sent to the server.
=item Red CRITICAL: ABNORMAL EXIT. child for server died through a crass with this error->[].
-
+
A lond child terminated. NOte that this termination can also occur when the
child receives the QUIT or DIE signals. is the process id of the child,
the host lond is working for, and the reason the child died
@@ -8384,7 +8105,7 @@ file when sent it's USR1 signal. That p
assumed to be hung in some un-fixable way.
=item Finished checking children
-
+
Master processs's USR1 processing is cojmplete.
=item (Red) CRITICAL: ------- Starting ------
@@ -8398,7 +8119,7 @@ Started a new child process for
connected to the child. This was as a result of a TCP/IP connection from a client.
=item Unable to determine who caller was, getpeername returned nothing
-
+
In child process initialization. either getpeername returned undef or
a zero sized object was returned. Processing continues, but in my opinion,
this should be cause for the child to exit.
@@ -8409,7 +8130,7 @@ In child process initialization. The pe
The client address is stored as "Unavailable" and processing continues.
=item (Yellow) INFO: Connection connection type =
-
+
In child initialization. A good connectionw as received from .
=over 2
@@ -8459,7 +8180,7 @@ The client ( is the peer's name
negotiated an SSL connection with this child process.
=item (Green) Successful insecure authentication with
-
+
The client has successfully negotiated an insecure connection withthe child process.