--- loncom/lond 2005/09/01 07:49:43 1.296 +++ loncom/lond 2020/05/05 20:28:56 1.489.2.38 @@ -2,7 +2,7 @@ # The LearningOnline Network # lond "LON Daemon" Server (port "LOND" 5663) # -# $Id: lond,v 1.296 2005/09/01 07:49:43 albertel Exp $ +# $Id: lond,v 1.489.2.38 2020/05/05 20:28:56 raeburn Exp $ # # Copyright Michigan State University Board of Trustees # @@ -31,35 +31,39 @@ use strict; use lib '/home/httpd/lib/perl/'; +use LONCAPA; use LONCAPA::Configuration; +use LONCAPA::Lond; use IO::Socket; use IO::File; #use Apache::File; -use Symbol; use POSIX; use Crypt::IDEA; use LWP::UserAgent(); +use Digest::MD5 qw(md5_hex); use GDBM_File; -use Authen::Krb4; use Authen::Krb5; -use lib '/home/httpd/lib/perl/'; use localauth; use localenroll; use localstudentphoto; use File::Copy; use File::Find; -use LONCAPA::ConfigFileEdit; use LONCAPA::lonlocal; use LONCAPA::lonssl; use Fcntl qw(:flock); +use Apache::lonnet; +use Mail::Send; +use Crypt::Eksblowfish::Bcrypt; +use Digest::SHA; +use Encode; my $DEBUG = 0; # Non zero to enable debug log entries. my $status=''; my $lastlog=''; -my $VERSION='$Revision: 1.296 $'; #' stupid emacs +my $VERSION='$Revision: 1.489.2.38 $'; #' stupid emacs my $remoteVERSION; my $currenthostid="default"; my $currentdomainid; @@ -67,9 +71,11 @@ my $currentdomainid; my $client; my $clientip; # IP address of client. my $clientname; # LonCAPA name of client. +my $clientversion; # LonCAPA version running on client. +my $clienthomedom; # LonCAPA domain of homeID for client. + # primary library server. my $server; -my $thisserver; # DNS of us. my $keymode; @@ -85,15 +91,12 @@ my $tmpsnum = 0; # Id of tmpputs. my $ConnectionType; -my %hostid; # ID's for hosts in cluster by ip. -my %hostdom; # LonCAPA domain for hosts in cluster. -my %hostip; # IPs for hosts in cluster. -my %hostdns; # ID's of hosts looked up by DNS name. - my %managers; # Ip -> manager names my %perlvar; # Will have the apache conf defined perl vars. +my $dist; + # # The hash below is used for command dispatching, and is therefore keyed on the request keyword. # Each element of the hash contains a reference to an array that contains: @@ -129,25 +132,16 @@ my @passwderrors = ("ok", "pwchange_failure - lcpasswd Error filename is invalid"); -# The array below are lcuseradd error strings.: - -my $lastadderror = 13; -my @adderrors = ("ok", - "User ID mismatch, lcuseradd must run as user www", - "lcuseradd Incorrect number of command line parameters must be 3", - "lcuseradd Incorrect number of stdinput lines, must be 3", - "lcuseradd Too many other simultaneous pwd changes in progress", - "lcuseradd User does not exist", - "lcuseradd Unable to make www member of users's group", - "lcuseradd Unable to su to root", - "lcuseradd Unable to set password", - "lcuseradd Usrname has invalid characters", - "lcuseradd Password has an invalid character", - "lcuseradd User already exists", - "lcuseradd Could not add user.", - "lcuseradd Password mismatch"); - +# This array are the errors from lcinstallfile: +my @installerrors = ("ok", + "Initial user id of client not that of www", + "Usage error, not enough command line arguments", + "Source filename does not exist", + "Destination filename does not exist", + "Some file operation failed", + "Invalid table filename." + ); # # Statistics that are maintained and dislayed in the status line. @@ -177,19 +171,16 @@ sub ResetStatistics { # $Socket - Socket open on client. # $initcmd - The full text of the init command. # -# Implicit inputs: -# $thisserver - Our DNS name. -# # Returns: # IDEA session key on success. # undef on failure. # sub LocalConnection { my ($Socket, $initcmd) = @_; - Debug("Attempting local connection: $initcmd client: $clientip me: $thisserver"); + Debug("Attempting local connection: $initcmd client: $clientip"); if($clientip ne "127.0.0.1") { &logthis(' LocalConnection rejecting non local: ' - ."$clientip ne $thisserver "); + ."$clientip ne 127.0.0.1 "); close $Socket; return undef; } else { @@ -407,6 +398,7 @@ sub isClient { # sub ReadManagerTable { + &Debug("Reading manager table"); # Clean out the old table first.. foreach my $key (keys %managers) { @@ -415,15 +407,18 @@ sub ReadManagerTable { my $tablename = $perlvar{'lonTabDir'}."/managers.tab"; if (!open (MANAGERS, $tablename)) { - logthis('No manager table. Nobody can manage!!'); - return; + my $hostname = &Apache::lonnet::hostname($perlvar{'lonHostID'}); + if (&Apache::lonnet::is_LC_dns($hostname)) { + &logthis('No manager table. Nobody can manage!!'); + } + return; } while(my $host = ) { chomp($host); if ($host =~ "^#") { # Comment line. next; } - if (!defined $hostip{$host}) { # This is a non cluster member + if (!defined &Apache::lonnet::get_host_ip($host)) { # This is a non cluster member # The entry is of the form: # cluname:hostname # cluname - A 'cluster hostname' is needed in order to negotiate @@ -441,7 +436,7 @@ sub ReadManagerTable { } } else { logthis(' existing host'." $host\n"); - $managers{$hostip{$host}} = $host; # Use info from cluster tab if clumemeber + $managers{&Apache::lonnet::get_host_ip($host)} = $host; # Use info from cluster tab if cluster memeber } } } @@ -502,38 +497,37 @@ sub AdjustHostContents { my $adjusted; my $me = $perlvar{'lonHostID'}; - foreach my $line (split(/\n/,$contents)) { - if(!(($line eq "") || ($line =~ /^ *\#/) || ($line =~ /^ *$/))) { + foreach my $line (split(/\n/,$contents)) { + if(!(($line eq "") || ($line =~ /^ *\#/) || ($line =~ /^ *$/) || + ($line =~ /^\s*\^/))) { chomp($line); my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon)=split(/:/,$line); if ($id eq $me) { - my $ip = gethostbyname($name); - my $ipnew = inet_ntoa($ip); - $ip = $ipnew; + my $ip = gethostbyname($name); + my $ipnew = inet_ntoa($ip); + $ip = $ipnew; # Reconstruct the host line and append to adjusted: - my $newline = "$id:$domain:$role:$name:$ip"; - if($maxcon ne "") { # Not all hosts have loncnew tuning params - $newline .= ":$maxcon:$idleto:$mincon"; - } - $adjusted .= $newline."\n"; + my $newline = "$id:$domain:$role:$name:$ip"; + if($maxcon ne "") { # Not all hosts have loncnew tuning params + $newline .= ":$maxcon:$idleto:$mincon"; + } + $adjusted .= $newline."\n"; - } else { # Not me, pass unmodified. - $adjusted .= $line."\n"; - } + } else { # Not me, pass unmodified. + $adjusted .= $line."\n"; + } } else { # Blank or comment never re-written. $adjusted .= $line."\n"; # Pass blanks and comments as is. } - } - return $adjusted; + } + return $adjusted; } # # InstallFile: Called to install an administrative file: -# - The file is created with .tmp -# - The .tmp file is then mv'd to -# This lugubrious procedure is done to ensure that we are never without -# a valid, even if dated, version of the file regardless of who crashes -# and when the crash occurs. +# - The file is created int a temp directory called .tmp +# - lcinstall file is called to install the file. +# since the web app has no direct write access to the table directory # # Parameters: # Name of the file @@ -541,11 +535,16 @@ sub AdjustHostContents { # Return: # nonzero - success. # 0 - failure and $! has an errno. +# Assumptions: +# File installtion is a relatively infrequent # sub InstallFile { my ($Filename, $Contents) = @_; - my $TempFile = $Filename.".tmp"; +# my $TempFile = $Filename.".tmp"; + my $exedir = $perlvar{'lonDaemons'}; + my $tmpdir = $exedir.'/tmp/'; + my $TempFile = $tmpdir."TempTableFile.tmp"; # Open the file for write: @@ -559,11 +558,27 @@ sub InstallFile { print $fh ($Contents); $fh->close; # In case we ever have a filesystem w. locking - chmod(0660, $TempFile); + chmod(0664, $TempFile); # Everyone can write it. - # Now we can move install the file in position. - - move($TempFile, $Filename); + # Use lcinstall file to put the file in the table directory... + + &Debug("Opening pipe to $exedir/lcinstallfile $TempFile $Filename"); + my $pf = IO::File->new("| $exedir/lcinstallfile $TempFile $Filename > $exedir/logs/lcinstallfile.log"); + close $pf; + my $err = $?; + &Debug("Status is $err"); + if ($err != 0) { + my $msg = $err; + if ($err < @installerrors) { + $msg = $installerrors[$err]; + } + &logthis("Install failed for table file $Filename : $msg"); + return 0; + } + + # Remove the temp file: + + unlink($TempFile); return 1; } @@ -571,8 +586,10 @@ sub InstallFile { # # ConfigFileFromSelector: converts a configuration file selector -# (one of host or domain at this point) into a -# configuration file pathname. +# into a configuration file pathname. +# Supports the following file selectors: +# hosts, domain, dns_hosts, dns_domain +# # # Parameters: # selector - Configuration file selector. @@ -584,15 +601,11 @@ sub ConfigFileFromSelector { my $tablefile; my $tabledir = $perlvar{'lonTabDir'}.'/'; - if ($selector eq "hosts") { - $tablefile = $tabledir."hosts.tab"; - } elsif ($selector eq "domain") { - $tablefile = $tabledir."domain.tab"; - } else { - return undef; + if (($selector eq "hosts") || ($selector eq "domain") || + ($selector eq "dns_hosts") || ($selector eq "dns_domain")) { + $tablefile = $tabledir.$selector.'.tab'; } return $tablefile; - } # # PushFile: Called to do an administrative push of a file. @@ -610,13 +623,16 @@ sub ConfigFileFromSelector { # String to send to client ("ok" or "refused" if bad file). # sub PushFile { - my $request = shift; + my $request = shift; my ($command, $filename, $contents) = split(":", $request, 3); + &Debug("PushFile"); # At this point in time, pushes for only the following tables are # supported: # hosts.tab ($filename eq host). # domain.tab ($filename eq domain). + # dns_hosts.tab ($filename eq dns_host). + # dns_domain.tab ($filename eq dns_domain). # Construct the destination filename or reject the request. # # lonManage is supposed to ensure this, however this session could be @@ -628,20 +644,7 @@ sub PushFile { if(! (defined $tablefile)) { return "refused"; } - # - # >copy< the old table to the backup table - # don't rename in case system crashes/reboots etc. in the time - # window between a rename and write. - # - my $backupfile = $tablefile; - $backupfile =~ s/\.tab$/.old/; - if(!CopyFile($tablefile, $backupfile)) { - &logthis(' CopyFile from '.$tablefile." to ".$backupfile." failed "); - return "error:$!"; - } - &logthis(' Pushfile: backed up ' - .$tablefile." to $backupfile"); - + # If the file being pushed is the host file, we adjust the entry for ourself so that the # IP will be our current IP as looked up in dns. Note this is only 99% good as it's possible # to conceive of conditions where we don't have a DNS entry locally. This is possible in a @@ -650,21 +653,80 @@ sub PushFile { if($filename eq "host") { $contents = AdjustHostContents($contents); + } elsif ($filename eq 'dns_host' || $filename eq 'dns_domain') { + if ($contents eq '') { + &logthis(' Pushfile: unable to install ' + .$tablefile." - no data received from push. "); + return 'error: push had no data'; + } + if (&Apache::lonnet::get_host_ip($clientname)) { + my $clienthost = &Apache::lonnet::hostname($clientname); + if ($managers{$clientip} eq $clientname) { + my $clientprotocol = $Apache::lonnet::protocol{$clientname}; + $clientprotocol = 'http' if ($clientprotocol ne 'https'); + my $url = '/adm/'.$filename; + $url =~ s{_}{/}; + my $ua=new LWP::UserAgent; + $ua->timeout(60); + my $request=new HTTP::Request('GET',"$clientprotocol://$clienthost$url"); + my $response=$ua->request($request); + if ($response->is_error()) { + &logthis(' Pushfile: unable to install ' + .$tablefile." - error attempting to pull data. "); + return 'error: pull failed'; + } else { + my $result = $response->content; + chomp($result); + unless ($result eq $contents) { + &logthis(' Pushfile: unable to install ' + .$tablefile." - pushed data and pulled data differ. "); + my $pushleng = length($contents); + my $pullleng = length($result); + if ($pushleng != $pullleng) { + return "error: $pushleng vs $pullleng bytes"; + } else { + return "error: mismatch push and pull"; + } + } + } + } + } } # Install the new file: + &logthis("Installing new $tablefile contents:\n$contents"); if(!InstallFile($tablefile, $contents)) { &logthis(' Pushfile: unable to install ' .$tablefile." $! "); return "error:$!"; } else { &logthis(' Installed new '.$tablefile - .""); - + ." - transaction by: $clientname ($clientip)"); + my $adminmail = $perlvar{'lonAdmEMail'}; + my $admindom = &Apache::lonnet::host_domain($perlvar{'lonHostID'}); + if ($admindom ne '') { + my %domconfig = + &Apache::lonnet::get_dom('configuration',['contacts'],$admindom); + if (ref($domconfig{'contacts'}) eq 'HASH') { + if ($domconfig{'contacts'}{'adminemail'} ne '') { + $adminmail = $domconfig{'contacts'}{'adminemail'}; + } + } + } + if ($adminmail =~ /^[^\@]+\@[^\@]+$/) { + my $msg = new Mail::Send; + $msg->to($adminmail); + $msg->subject('LON-CAPA DNS update on '.$perlvar{'lonHostID'}); + $msg->add('Content-type','text/plain; charset=UTF-8'); + if (my $fh = $msg->open()) { + print $fh 'Update to '.$tablefile.' from Cluster Manager '. + "$clientname ($clientip)\n"; + $fh->close; + } + } } - # Indicate success: return "ok"; @@ -834,16 +896,14 @@ sub AdjustOurHost { # Use the config line to get my hostname. # Use gethostbyname to translate that into an IP address. # - my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon) = split(/:/,$ConfigLine); - my $BinaryIp = gethostbyname($name); - my $ip = inet_ntoa($ip); + my ($id,$domain,$role,$name,$maxcon,$idleto,$mincon) = split(/:/,$ConfigLine); # # Reassemble the config line from the elements in the list. # Note that if the loncnew items were not present before, they will # be now even if they would be empty # my $newConfigLine = $id; - foreach my $item ($domain, $role, $name, $ip, $maxcon, $idleto, $mincon) { + foreach my $item ($domain, $role, $name, $maxcon, $idleto, $mincon) { $newConfigLine .= ":".$item; } # Replace the line: @@ -889,11 +949,11 @@ sub EditFile { # Split the command into it's pieces: edit:filetype:script - my ($request, $filetype, $script) = split(/:/, $request,3); # : in script + my ($cmd, $filetype, $script) = split(/:/, $request,3); # : in script # Check the pre-coditions for success: - if($request != "edit") { # Something is amiss afoot alack. + if($cmd != "edit") { # Something is amiss afoot alack. return "error:edit request detected, but request != 'edit'\n"; } if( ($filetype ne "hosts") && @@ -938,105 +998,6 @@ sub EditFile { return "ok\n"; } -#--------------------------------------------------------------- -# -# Manipulation of hash based databases (factoring out common code -# for later use as we refactor. -# -# Ties a domain level resource file to a hash. -# If requested a history entry is created in the associated hist file. -# -# Parameters: -# domain - Name of the domain in which the resource file lives. -# namespace - Name of the hash within that domain. -# how - How to tie the hash (e.g. GDBM_WRCREAT()). -# loghead - Optional parameter, if present a log entry is created -# in the associated history file and this is the first part -# of that entry. -# logtail - Goes along with loghead, The actual logentry is of the -# form $loghead::logtail. -# Returns: -# Reference to a hash bound to the db file or alternatively undef -# if the tie failed. -# -sub tie_domain_hash { - my ($domain,$namespace,$how,$loghead,$logtail) = @_; - - # Filter out any whitespace in the domain name: - - $domain =~ s/\W//g; - - # We have enough to go on to tie the hash: - - my $user_top_dir = $perlvar{'lonUsersDir'}; - my $domain_dir = $user_top_dir."/$domain"; - my $resource_file = $domain_dir."/$namespace.db"; - my %hash; - if(tie(%hash, 'GDBM_File', $resource_file, $how, 0640)) { - if (defined($loghead)) { # Need to log the operation. - my $logFh = IO::File->new(">>$domain_dir/$namespace.hist"); - if($logFh) { - my $timestamp = time; - print $logFh "$loghead:$timestamp:$logtail\n"; - } - $logFh->close; - } - return \%hash; # Return the tied hash. - } else { - return undef; # Tie failed. - } -} - -# -# Ties a user's resource file to a hash. -# If necessary, an appropriate history -# log file entry is made as well. -# This sub factors out common code from the subs that manipulate -# the various gdbm files that keep keyword value pairs. -# Parameters: -# domain - Name of the domain the user is in. -# user - Name of the 'current user'. -# namespace - Namespace representing the file to tie. -# how - What the tie is done to (e.g. GDBM_WRCREAT(). -# loghead - Optional first part of log entry if there may be a -# history file. -# what - Optional tail of log entry if there may be a history -# file. -# Returns: -# hash to which the database is tied. It's up to the caller to untie. -# undef if the has could not be tied. -# -sub tie_user_hash { - my ($domain,$user,$namespace,$how,$loghead,$what) = @_; - - $namespace=~s/\//\_/g; # / -> _ - $namespace=~s/\W//g; # whitespace eliminated. - my $proname = propath($domain, $user); - - # Tie the database. - - my %hash; - if(tie(%hash, 'GDBM_File', "$proname/$namespace.db", - $how, 0640)) { - # If this is a namespace for which a history is kept, - # make the history log entry: - if (($namespace !~/^nohist\_/) && (defined($loghead))) { - my $args = scalar @_; - Debug(" Opening history: $namespace $args"); - my $hfh = IO::File->new(">>$proname/$namespace.hist"); - if($hfh) { - my $now = time; - print $hfh "$loghead:$now:$what\n"; - } - $hfh->close; - } - return \%hash; - } else { - return undef; - } - -} - # read_profile # # Returns a set of specific entries from a user's profile file. @@ -1061,13 +1022,16 @@ sub read_profile { &GDBM_READER()); if ($hashref) { my @queries=split(/\&/,$what); + if ($namespace eq 'roles') { + @queries = map { &unescape($_); } @queries; + } my $qresult=''; for (my $i=0;$i<=$#queries;$i++) { $qresult.="$hashref->{$queries[$i]}&"; # Presumably failure gives empty string. } $qresult=~s/\&$//; # Remove trailing & from last lookup. - if (untie %$hashref) { + if (&untie_user_hash($hashref)) { return $qresult; } else { return "error: ".($!+0)." untie (GDBM) Failed"; @@ -1106,7 +1070,7 @@ sub ping_handler { my ($cmd, $tail, $client) = @_; Debug("$cmd $tail $client .. $currenthostid:"); - Reply( $client,"$currenthostid\n","$cmd:$tail"); + Reply( $client,\$currenthostid,"$cmd:$tail"); return 1; } @@ -1132,7 +1096,7 @@ sub ping_handler { sub pong_handler { my ($cmd, $tail, $replyfd) = @_; - my $reply=&reply("ping",$clientname); + my $reply=&Apache::lonnet::reply("ping",$clientname); &Reply( $replyfd, "$currenthostid:$reply\n", "$cmd:$tail"); return 1; } @@ -1154,7 +1118,7 @@ sub pong_handler { # Implicit Inputs: # $currenthostid - Global variable that carries the name of the host # known as. -# $clientname - Global variable that carries the name of the hsot we're connected to. +# $clientname - Global variable that carries the name of the host we're connected to. # Returns: # 1 - Ok to continue processing. # 0 - Program should exit. @@ -1176,7 +1140,7 @@ sub establish_key_handler { $key=substr($key,0,32); my $cipherkey=pack("H32",$key); $cipher=new IDEA $cipherkey; - &Reply($replyfd, "$buildkey\n", "$cmd:$tail"); + &Reply($replyfd, \$buildkey, "$cmd:$tail"); return 1; @@ -1193,7 +1157,7 @@ sub establish_key_handler { # Implicit Inputs: # $currenthostid - Global variable that carries the name of the host # known as. -# $clientname - Global variable that carries the name of the hsot we're connected to. +# $clientname - Global variable that carries the name of the host we're connected to. # Returns: # 1 - Ok to continue processing. # 0 - Program should exit. @@ -1202,6 +1166,8 @@ sub establish_key_handler { sub load_handler { my ($cmd, $tail, $replyfd) = @_; + + # Get the load average from /proc/loadavg and calculate it as a percentage of # the allowed load limit as set by the perl global variable lonLoadLim @@ -1213,7 +1179,7 @@ sub load_handler { my $loadpercent=100*$loadavg/$perlvar{'lonLoadLim'}; - &Reply( $replyfd, "$loadpercent\n", "$cmd:$tail"); + &Reply( $replyfd, \$loadpercent, "$cmd:$tail"); return 1; } @@ -1230,7 +1196,7 @@ sub load_handler { # Implicit Inputs: # $currenthostid - Global variable that carries the name of the host # known as. -# $clientname - Global variable that carries the name of the hsot we're connected to. +# $clientname - Global variable that carries the name of the host we're connected to. # Returns: # 1 - Ok to continue processing. # 0 - Program should exit @@ -1242,8 +1208,8 @@ sub load_handler { sub user_load_handler { my ($cmd, $tail, $replyfd) = @_; - my $userloadpercent=&userload(); - &Reply($replyfd, "$userloadpercent\n", "$cmd:$tail"); + my $userloadpercent=&Apache::lonnet::userload(); + &Reply($replyfd, \$userloadpercent, "$cmd:$tail"); return 1; } @@ -1286,7 +1252,7 @@ sub user_authorization_type { } else { $type .= ':'; } - &Reply( $replyfd, "$type\n", $userinput); + &Reply( $replyfd, \$type, $userinput); } return 1; @@ -1308,7 +1274,7 @@ sub user_authorization_type { # a reply is written to the client. sub push_file_handler { my ($cmd, $tail, $client) = @_; - + &Debug("In push file handler"); my $userinput = "$cmd:$tail"; # At this time we only know that the IP of our partner is a valid manager @@ -1316,23 +1282,27 @@ sub push_file_handler { # spoofing). my $cert = &GetCertificate($userinput); - if(&ValidManager($cert)) { + if(&ValidManager($cert)) { + &Debug("Valid manager: $client"); # Now presumably we have the bona fides of both the peer host and the # process making the request. my $reply = &PushFile($userinput); - &Reply($client, "$reply\n", $userinput); + &Reply($client, \$reply, $userinput); } else { + &logthis("push_file_handler $client is not valid"); &Failure( $client, "refused\n", $userinput); } return 1; } ®ister_handler("pushfile", \&push_file_handler, 1, 0, 1); +# The du_handler routine should be considered obsolete and is retained +# for communication with legacy servers. Please see the du2_handler. # -# du - list the disk usuage of a directory recursively. +# du - list the disk usage of a directory recursively. # # note: stolen code from the ls file handler # under construction by Rick Banghart @@ -1350,7 +1320,7 @@ sub push_file_handler { # sub du_handler { my ($cmd, $ududir, $client) = @_; - my ($ududir) = split(/:/,$ududir); # Make 'telnet' testing easier. + ($ududir) = split(/:/,$ududir); # Make 'telnet' testing easier. my $userinput = "$cmd:$ududir"; if ($ududir=~/\.\./ || $ududir!~m|^/home/httpd/|) { @@ -1368,12 +1338,13 @@ sub du_handler { my $code=sub { if ($_=~/\.\d+\./) { return;} if ($_=~/\.meta$/) { return;} + if (-d $_) { return;} $total_size+=(stat($_))[7]; }; chdir($ududir); find($code,$ududir); $total_size=int($total_size/1024); - &Reply($client,"$total_size\n","$cmd:$ududir"); + &Reply($client,\$total_size,"$cmd:$ududir"); } else { &Failure($client, "bad_directory:$ududir\n","$cmd:$ududir"); } @@ -1381,14 +1352,94 @@ sub du_handler { } ®ister_handler("du", \&du_handler, 0, 1, 0); +# Please also see the du_handler, which is obsoleted by du2. +# du2_handler differs from du_handler in that required path to directory +# provided by &propath() is prepended in the handler instead of on the +# client side. +# +# du2 - list the disk usage of a directory recursively. +# +# Parameters: +# $cmd - The command that dispatched us (du). +# $tail - The tail of the request that invoked us. +# $tail is a : separated list of the following: +# - $ududir - directory path to list (before prepending) +# - $getpropath = 1 if &propath() should prepend +# - $uname - username to use for &propath or user dir +# - $udom - domain to use for &propath or user dir +# All are escaped. +# $client - Socket open on the client. +# Returns: +# 1 - indicating that the daemon should not disconnect. +# Side Effects: +# The reply is written to $client. +# + +sub du2_handler { + my ($cmd, $tail, $client) = @_; + my ($ududir,$getpropath,$uname,$udom) = map { &unescape($_) } (split(/:/, $tail)); + my $userinput = "$cmd:$tail"; + if (($ududir=~/\.\./) || (($ududir!~m|^/home/httpd/|) && (!$getpropath))) { + &Failure($client,"refused\n","$cmd:$tail"); + return 1; + } + if ($getpropath) { + if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) { + $ududir = &propath($udom,$uname).'/'.$ududir; + } else { + &Failure($client,"refused\n","$cmd:$tail"); + return 1; + } + } + # Since $ududir could have some nasties in it, + # we will require that ududir is a valid + # directory. Just in case someone tries to + # slip us a line like .;(cd /home/httpd rm -rf*) + # etc. + # + if (-d $ududir) { + my $total_size=0; + my $code=sub { + if ($_=~/\.\d+\./) { return;} + if ($_=~/\.meta$/) { return;} + if (-d $_) { return;} + $total_size+=(stat($_))[7]; + }; + chdir($ududir); + find($code,$ududir); + $total_size=int($total_size/1024); + &Reply($client,\$total_size,"$cmd:$ududir"); + } else { + &Failure($client, "bad_directory:$ududir\n","$cmd:$tail"); + } + return 1; +} +®ister_handler("du2", \&du2_handler, 0, 1, 0); + # -# The ls_handler routine should be considered obosolete and is retained -# for communication with legacy servers. Please see the ls2_handler. +# The ls_handler routine should be considered obsolete and is retained +# for communication with legacy servers. Please see the ls3_handler. # # ls - list the contents of a directory. For each file in the # selected directory the filename followed by the full output of # the stat function is returned. The returned info for each # file are separated by ':'. The stat fields are separated by &'s. +# +# If the requested path contains /../ or is: +# +# 1. for a directory, and the path does not begin with one of: +# (a) /home/httpd/html/res/ +# (b) /home/httpd/html/userfiles/ +# (c) /home/httpd/lonUsers//<1>/<2>/<3>//userfiles +# or is: +# +# 2. for a file, and the path (after prepending) does not begin with one of: +# (a) /home/httpd/lonUsers//<1>/<2>/<3>// +# (b) /home/httpd/html/res/// +# (c) /home/httpd/html/userfiles/// +# +# the response will be "refused". +# # Parameters: # $cmd - The command that dispatched us (ls). # $ulsdir - The directory path to list... I'm not sure what this @@ -1410,8 +1461,17 @@ sub ls_handler { my $rights; my $ulsout=''; my $ulsfn; + if ($ulsdir =~m{/\.\./}) { + &Failure($client,"refused\n",$userinput); + return 1; + } if (-e $ulsdir) { if(-d $ulsdir) { + unless (($ulsdir =~ m{^/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) || + ($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/userfiles})) { + &Failure($client,"refused\n",$userinput); + return 1; + } if (opendir(LSDIR,$ulsdir)) { while ($ulsfn=readdir(LSDIR)) { undef($obs); @@ -1422,7 +1482,7 @@ sub ls_handler { open(FILE, $ulsdir.'/'.$ulsfn.".meta"); my @obsolete=; foreach my $obsolete (@obsolete) { - if($obsolete =~ m|()(on)|) { $obs = 1; } + if($obsolete =~ m/()(on|1)/) { $obs = 1; } if($obsolete =~ m|()(default)|) { $rights = 1; } } } @@ -1435,6 +1495,11 @@ sub ls_handler { closedir(LSDIR); } } else { + unless (($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/}) || + ($ulsdir =~ m{^/home/httpd/html/(?:res|userfiles)/$LONCAPA::match_domain/$LONCAPA::match_name/})) { + &Failure($client,"refused\n",$userinput); + return 1; + } my @ulsstats=stat($ulsdir); $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':'; } @@ -1442,15 +1507,16 @@ sub ls_handler { $ulsout='no_such_dir'; } if ($ulsout eq '') { $ulsout='empty'; } - &Reply($client, "$ulsout\n", $userinput); # This supports debug logging. + &Reply($client, \$ulsout, $userinput); # This supports debug logging. return 1; } ®ister_handler("ls", \&ls_handler, 0, 1, 0); -# -# Please also see the ls_handler, which this routine obosolets. +# The ls2_handler routine should be considered obsolete and is retained +# for communication with legacy servers. Please see the ls3_handler. +# Please also see the ls_handler, which was itself obsoleted by ls2. # ls2_handler differs from ls_handler in that it escapes its return # values before concatenating them together with ':'s. # @@ -1458,6 +1524,22 @@ sub ls_handler { # selected directory the filename followed by the full output of # the stat function is returned. The returned info for each # file are separated by ':'. The stat fields are separated by &'s. +# +# If the requested path contains /../ or is: +# +# 1. for a directory, and the path does not begin with one of: +# (a) /home/httpd/html/res/ +# (b) /home/httpd/html/userfiles/ +# (c) /home/httpd/lonUsers//<1>/<2>/<3>//userfiles +# or is: +# +# 2. for a file, and the path (after prepending) does not begin with one of: +# (a) /home/httpd/lonUsers//<1>/<2>/<3>// +# (b) /home/httpd/html/res/// +# (c) /home/httpd/html/userfiles/// +# +# the response will be "refused". +# # Parameters: # $cmd - The command that dispatched us (ls). # $ulsdir - The directory path to list... I'm not sure what this @@ -1478,8 +1560,17 @@ sub ls2_handler { my $rights; my $ulsout=''; my $ulsfn; + if ($ulsdir =~m{/\.\./}) { + &Failure($client,"refused\n",$userinput); + return 1; + } if (-e $ulsdir) { if(-d $ulsdir) { + unless (($ulsdir =~ m{^/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) || + ($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/userfiles})) { + &Failure($client,"refused\n","$userinput"); + return 1; + } if (opendir(LSDIR,$ulsdir)) { while ($ulsfn=readdir(LSDIR)) { undef($obs); @@ -1490,7 +1581,7 @@ sub ls2_handler { open(FILE, $ulsdir.'/'.$ulsfn.".meta"); my @obsolete=; foreach my $obsolete (@obsolete) { - if($obsolete =~ m|()(on)|) { $obs = 1; } + if($obsolete =~ m/()(on|1)/) { $obs = 1; } if($obsolete =~ m|()(default)|) { $rights = 1; } @@ -1504,6 +1595,11 @@ sub ls2_handler { closedir(LSDIR); } } else { + unless (($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/}) || + ($ulsdir =~ m{^/home/httpd/html/(?:res|userfiles)/$LONCAPA::match_domain/$LONCAPA::match_name/})) { + &Failure($client,"refused\n",$userinput); + return 1; + } my @ulsstats=stat($ulsdir); $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':'; } @@ -1511,10 +1607,286 @@ sub ls2_handler { $ulsout='no_such_dir'; } if ($ulsout eq '') { $ulsout='empty'; } - &Reply($client, "$ulsout\n", $userinput); # This supports debug logging. + &Reply($client, \$ulsout, $userinput); # This supports debug logging. return 1; } ®ister_handler("ls2", \&ls2_handler, 0, 1, 0); +# +# ls3 - list the contents of a directory. For each file in the +# selected directory the filename followed by the full output of +# the stat function is returned. The returned info for each +# file are separated by ':'. The stat fields are separated by &'s. +# +# If the requested path (after prepending) contains /../ or is: +# +# 1. for a directory, and the path does not begin with one of: +# (a) /home/httpd/html/res/ +# (b) /home/httpd/html/userfiles/ +# (c) /home/httpd/lonUsers//<1>/<2>/<3>//userfiles +# (d) /home/httpd/html/priv/ and client is the homeserver +# +# or is: +# +# 2. for a file, and the path (after prepending) does not begin with one of: +# (a) /home/httpd/lonUsers//<1>/<2>/<3>// +# (b) /home/httpd/html/res/// +# (c) /home/httpd/html/userfiles/// +# (d) /home/httpd/html/priv/// and client is the homeserver +# +# the response will be "refused". +# +# Parameters: +# $cmd - The command that dispatched us (ls). +# $tail - The tail of the request that invoked us. +# $tail is a : separated list of the following: +# - $ulsdir - directory path to list (before prepending) +# - $getpropath = 1 if &propath() should prepend +# - $getuserdir = 1 if path to user dir in lonUsers should +# prepend +# - $alternate_root - path to prepend +# - $uname - username to use for &propath or user dir +# - $udom - domain to use for &propath or user dir +# All of these except $getpropath and &getuserdir are escaped. +# no_such_dir. +# $client - Socket open on the client. +# Returns: +# 1 - indicating that the daemon should not disconnect. +# Side Effects: +# The reply is written to $client. +# + +sub ls3_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($ulsdir,$getpropath,$getuserdir,$alternate_root,$uname,$udom) = + split(/:/,$tail); + if (defined($ulsdir)) { + $ulsdir = &unescape($ulsdir); + } + if (defined($alternate_root)) { + $alternate_root = &unescape($alternate_root); + } + if (defined($uname)) { + $uname = &unescape($uname); + } + if (defined($udom)) { + $udom = &unescape($udom); + } + + my $dir_root = $perlvar{'lonDocRoot'}; + if (($getpropath) || ($getuserdir)) { + if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) { + $dir_root = &propath($udom,$uname); + $dir_root =~ s/\/$//; + } else { + &Failure($client,"refused\n",$userinput); + return 1; + } + } elsif ($alternate_root ne '') { + $dir_root = $alternate_root; + } + if (($dir_root ne '') && ($dir_root ne '/')) { + if ($ulsdir =~ /^\//) { + $ulsdir = $dir_root.$ulsdir; + } else { + $ulsdir = $dir_root.'/'.$ulsdir; + } + } + if ($ulsdir =~m{/\.\./}) { + &Failure($client,"refused\n",$userinput); + return 1; + } + my $islocal; + my @machine_ids = &Apache::lonnet::current_machine_ids(); + if (grep(/^\Q$clientname\E$/,@machine_ids)) { + $islocal = 1; + } + my $obs; + my $rights; + my $ulsout=''; + my $ulsfn; + if (-e $ulsdir) { + if(-d $ulsdir) { + unless (($getpropath) || ($getuserdir) || + ($ulsdir =~ m{^/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) || + ($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/userfiles}) || + (($ulsdir =~ m{^/home/httpd/html/priv/$LONCAPA::match_domain}) && ($islocal))) { + &Failure($client,"refused\n",$userinput); + return 1; + } + if (opendir(LSDIR,$ulsdir)) { + while ($ulsfn=readdir(LSDIR)) { + undef($obs); + undef($rights); + my @ulsstats=stat($ulsdir.'/'.$ulsfn); + #We do some obsolete checking here + if(-e $ulsdir.'/'.$ulsfn.".meta") { + open(FILE, $ulsdir.'/'.$ulsfn.".meta"); + my @obsolete=; + foreach my $obsolete (@obsolete) { + if($obsolete =~ m/()(on|1)/) { $obs = 1; } + if($obsolete =~ m|()(default)|) { + $rights = 1; + } + } + } + my $tmp = $ulsfn.'&'.join('&',@ulsstats); + if ($obs eq '1') { $tmp.="&1"; } else { $tmp.="&0"; } + if ($rights eq '1') { $tmp.="&1"; } else { $tmp.="&0"; } + $ulsout.= &escape($tmp).':'; + } + closedir(LSDIR); + } + } else { + unless (($getpropath) || ($getuserdir) || + ($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/}) || + ($ulsdir =~ m{^/home/httpd/html/(?:res|userfiles)/$LONCAPA::match_domain/$LONCAPA::match_name/}) || + (($ulsdir =~ m{^/home/httpd/html/priv/$LONCAPA::match_domain/$LONCAPA::match_name/}) && ($islocal))) { + &Failure($client,"refused\n",$userinput); + return 1; + } + my @ulsstats=stat($ulsdir); + $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':'; + } + } else { + $ulsout='no_such_dir'; + } + if ($ulsout eq '') { $ulsout='empty'; } + &Reply($client, \$ulsout, $userinput); # This supports debug logging. + return 1; +} +®ister_handler("ls3", \&ls3_handler, 0, 1, 0); + +sub read_lonnet_global { + my ($cmd,$tail,$client) = @_; + my $userinput = "$cmd:$tail"; + my $requested = &Apache::lonnet::thaw_unescape($tail); + my $result; + my %packagevars = ( + spareid => \%Apache::lonnet::spareid, + perlvar => \%Apache::lonnet::perlvar, + ); + my %limit_to = ( + perlvar => { + lonOtherAuthen => 1, + lonBalancer => 1, + lonVersion => 1, + lonSysEMail => 1, + lonHostID => 1, + lonRole => 1, + lonDefDomain => 1, + lonLoadLim => 1, + lonUserLoadLim => 1, + } + ); + if (ref($requested) eq 'HASH') { + foreach my $what (keys(%{$requested})) { + my $response; + my $items = {}; + if (exists($packagevars{$what})) { + if (ref($limit_to{$what}) eq 'HASH') { + foreach my $varname (keys(%{$packagevars{$what}})) { + if ($limit_to{$what}{$varname}) { + $items->{$varname} = $packagevars{$what}{$varname}; + } + } + } else { + $items = $packagevars{$what}; + } + if ($what eq 'perlvar') { + if (!exists($packagevars{$what}{'lonBalancer'})) { + if ($dist =~ /^(centos|rhes|fedora|scientific|oracle)/) { + my $othervarref=LONCAPA::Configuration::read_conf('httpd.conf'); + if (ref($othervarref) eq 'HASH') { + $items->{'lonBalancer'} = $othervarref->{'lonBalancer'}; + } + } + } + } + $response = &Apache::lonnet::freeze_escape($items); + } + $result .= &escape($what).'='.$response.'&'; + } + } + $result =~ s/\&$//; + &Reply($client,\$result,$userinput); + return 1; +} +®ister_handler("readlonnetglobal", \&read_lonnet_global, 0, 1, 0); + +sub server_devalidatecache_handler { + my ($cmd,$tail,$client) = @_; + my $userinput = "$cmd:$tail"; + my $items = &unescape($tail); + my @cached = split(/\&/,$items); + foreach my $key (@cached) { + if ($key =~ /:/) { + my ($name,$id) = map { &unescape($_); } split(/:/,$key); + &Apache::lonnet::devalidate_cache_new($name,$id); + } + } + my $result = 'ok'; + &Reply($client,\$result,$userinput); + return 1; +} +®ister_handler("devalidatecache", \&server_devalidatecache_handler, 0, 1, 0); + +sub server_timezone_handler { + my ($cmd,$tail,$client) = @_; + my $userinput = "$cmd:$tail"; + my $timezone; + my $clockfile = '/etc/sysconfig/clock'; # Fedora/CentOS/SuSE + my $tzfile = '/etc/timezone'; # Debian/Ubuntu + if (-e $clockfile) { + if (open(my $fh,"<$clockfile")) { + while (<$fh>) { + next if (/^[\#\s]/); + if (/^(?:TIME)?ZONE\s*=\s*['"]?\s*([\w\/]+)/) { + $timezone = $1; + last; + } + } + close($fh); + } + } elsif (-e $tzfile) { + if (open(my $fh,"<$tzfile")) { + $timezone = <$fh>; + close($fh); + chomp($timezone); + if ($timezone =~ m{^Etc/(\w+)$}) { + $timezone = $1; + } + } + } + &Reply($client,\$timezone,$userinput); # This supports debug logging. + return 1; +} +®ister_handler("servertimezone", \&server_timezone_handler, 0, 1, 0); + +sub server_loncaparev_handler { + my ($cmd,$tail,$client) = @_; + my $userinput = "$cmd:$tail"; + &Reply($client,\$perlvar{'lonVersion'},$userinput); + return 1; +} +®ister_handler("serverloncaparev", \&server_loncaparev_handler, 0, 1, 0); + +sub server_homeID_handler { + my ($cmd,$tail,$client) = @_; + my $userinput = "$cmd:$tail"; + &Reply($client,\$perlvar{'lonHostID'},$userinput); + return 1; +} +®ister_handler("serverhomeID", \&server_homeID_handler, 0, 1, 0); + +sub server_distarch_handler { + my ($cmd,$tail,$client) = @_; + my $userinput = "$cmd:$tail"; + my $reply = &distro_and_arch(); + &Reply($client,\$reply,$userinput); + return 1; +} +®ister_handler("serverdistarch", \&server_distarch_handler, 0, 1, 0); # Process a reinit request. Reinit requests that either # lonc or lond be reinitialized so that an updated @@ -1539,7 +1911,7 @@ sub reinit_process_handler { if(&ValidManager($cert)) { chomp($userinput); my $reply = &ReinitProcess($userinput); - &Reply( $client, "$reply\n", $userinput); + &Reply( $client, \$reply, $userinput); } else { &Failure( $client, "refused\n", $userinput); } @@ -1623,15 +1995,51 @@ sub authenticate_handler { # udom - User's domain. # uname - Username. # upass - User's password. + # checkdefauth - Pass to validate_user() to try authentication + # with default auth type(s) if no user account. + # clientcancheckhost - Passed by clients with functionality in lonauth.pm + # to check if session can be hosted. - my ($udom,$uname,$upass)=split(/:/,$tail); - &Debug(" Authenticate domain = $udom, user = $uname, password = $upass"); + my ($udom, $uname, $upass, $checkdefauth, $clientcancheckhost)=split(/:/,$tail); + &Debug(" Authenticate domain = $udom, user = $uname, password = $upass, checkdefauth = $checkdefauth"); chomp($upass); $upass=&unescape($upass); - my $pwdcorrect = &validate_user($udom, $uname, $upass); + my $pwdcorrect = &validate_user($udom,$uname,$upass,$checkdefauth); if($pwdcorrect) { - &Reply( $client, "authorized\n", $userinput); + my $canhost = 1; + unless ($clientcancheckhost) { + my $uprimary_id = &Apache::lonnet::domain($udom,'primary'); + my $uint_dom = &Apache::lonnet::internet_dom($uprimary_id); + my @intdoms; + my $internet_names = &Apache::lonnet::get_internet_names($clientname); + if (ref($internet_names) eq 'ARRAY') { + @intdoms = @{$internet_names}; + } + unless ($uint_dom ne '' && grep(/^\Q$uint_dom\E$/,@intdoms)) { + my ($remote,$hosted); + my $remotesession = &get_usersession_config($udom,'remotesession'); + if (ref($remotesession) eq 'HASH') { + $remote = $remotesession->{'remote'}; + } + my $hostedsession = &get_usersession_config($clienthomedom,'hostedsession'); + if (ref($hostedsession) eq 'HASH') { + $hosted = $hostedsession->{'hosted'}; + } + my $loncaparev = $clientversion; + if ($loncaparev eq '') { + $loncaparev = $Apache::lonnet::loncaparevs{$clientname}; + } + $canhost = &Apache::lonnet::can_host_session($udom,$clientname, + $loncaparev, + $remote,$hosted); + } + } + if ($canhost) { + &Reply( $client, "authorized\n", $userinput); + } else { + &Reply( $client, "not_allowed_to_host\n", $userinput); + } # # Bad credentials: Failed to authorize # @@ -1674,40 +2082,129 @@ sub change_password_handler { # uname - Username. # upass - Current password. # npass - New password. + # context - Context in which this was called + # (preferences or reset_by_email). + # lonhost - HostID of server where request originated - my ($udom,$uname,$upass,$npass)=split(/:/,$tail); + my ($udom,$uname,$upass,$npass,$context,$lonhost)=split(/:/,$tail); $upass=&unescape($upass); $npass=&unescape($npass); &Debug("Trying to change password for $uname"); # First require that the user can be authenticated with their - # old password: - - my $validated = &validate_user($udom, $uname, $upass); + # old password unless context was 'reset_by_email': + + my ($validated,$failure); + if ($context eq 'reset_by_email') { + if ($lonhost eq '') { + $failure = 'invalid_client'; + } else { + $validated = 1; + } + } else { + $validated = &validate_user($udom, $uname, $upass); + } if($validated) { my $realpasswd = &get_auth_type($udom, $uname); # Defined since authd. - my ($howpwd,$contentpwd)=split(/:/,$realpasswd); + my $notunique; if ($howpwd eq 'internal') { &Debug("internal auth"); - my $salt=time; - $salt=substr($salt,6,2); - my $ncpass=crypt($npass,$salt); - if(&rewrite_password_file($udom, $uname, "internal:$ncpass")) { - &logthis("Result of password change for " - ."$uname: pwchange_success"); + my $ncpass = &hash_passwd($udom,$npass); + my (undef,$method,@rest) = split(/!/,$contentpwd); + if ($method eq 'bcrypt') { + my %passwdconf = &Apache::lonnet::get_passwdconf($udom); + if (($passwdconf{'numsaved'}) && ($passwdconf{'numsaved'} =~ /^\d+$/)) { + my @oldpasswds; + my $userpath = &propath($udom,$uname); + my $fullpath = $userpath.'/oldpasswds'; + if (-d $userpath) { + my @oldfiles; + if (-e $fullpath) { + if (opendir(my $dir,$fullpath)) { + (@oldfiles) = grep(/^\d+$/,readdir($dir)); + closedir($dir); + } + if (@oldfiles) { + @oldfiles = sort { $b <=> $a } (@oldfiles); + my $numremoved = 0; + for (my $i=0; $i<@oldfiles; $i++) { + if ($i>=$passwdconf{'numsaved'}) { + if (-f "$fullpath/$oldfiles[$i]") { + if (unlink("$fullpath/$oldfiles[$i]")) { + $numremoved ++; + } + } + } elsif (open(my $fh,'<',"$fullpath/$oldfiles[$i]")) { + while (my $line = <$fh>) { + push(@oldpasswds,$line); + } + close($fh); + } + } + if ($numremoved) { + &logthis("unlinked $numremoved old password files for $uname:$udom"); + } + } + } + push(@oldpasswds,$contentpwd); + foreach my $item (@oldpasswds) { + my (undef,$method,@rest) = split(/!/,$item); + if ($method eq 'bcrypt') { + my $result = &hash_passwd($udom,$npass,@rest); + if ($result eq $item) { + $notunique = 1; + last; + } + } + } + unless ($notunique) { + unless (-e $fullpath) { + if (&mkpath("$fullpath/")) { + chmod(0700,$fullpath); + } + } + if (-d $fullpath) { + my $now = time; + if (open(my $fh,'>',"$fullpath/$now")) { + print $fh $contentpwd; + close($fh); + chmod(0400,"$fullpath/$now"); + } + } + } + } + } + } + if ($notunique) { + my $msg="Result of password change for $uname:$udom - password matches one used before"; + if ($lonhost) { + $msg .= " - request originated from: $lonhost"; + } + &logthis($msg); + &Reply($client, "prioruse\n", $userinput); + } elsif (&rewrite_password_file($udom, $uname, "internal:$ncpass")) { + my $msg="Result of password change for $uname: pwchange_success"; + if ($lonhost) { + $msg .= " - request originated from: $lonhost"; + } + &logthis($msg); + &update_passwd_history($uname,$udom,$howpwd,$context); &Reply($client, "ok\n", $userinput); } else { &logthis("Unable to open $uname passwd " ."to change password"); &Failure( $client, "non_authorized\n",$userinput); } - } elsif ($howpwd eq 'unix') { + } elsif ($howpwd eq 'unix' && $context ne 'reset_by_email') { my $result = &change_unix_password($uname, $npass); + if ($result eq 'ok') { + &update_passwd_history($uname,$udom,$howpwd,$context); + } &logthis("Result of password change for $uname: ". $result); - &Reply($client, "$result\n", $userinput); + &Reply($client, \$result, $userinput); } else { # this just means that the current password mode is not # one we know how to change (e.g the kerberos auth modes or @@ -1715,15 +2212,49 @@ sub change_password_handler { # &Failure( $client, "auth_mode_error\n", $userinput); } - } else { - &Failure( $client, "non_authorized\n", $userinput); + if ($failure eq '') { + $failure = 'non_authorized'; + } + &Failure( $client, "$failure\n", $userinput); } return 1; } ®ister_handler("passwd", \&change_password_handler, 1, 1, 0); +sub hash_passwd { + my ($domain,$plainpass,@rest) = @_; + my ($salt,$cost); + if (@rest) { + $cost = $rest[0]; + # salt is first 22 characters, base-64 encoded by bcrypt + my $plainsalt = substr($rest[1],0,22); + $salt = Crypt::Eksblowfish::Bcrypt::de_base64($plainsalt); + } else { + my %domdefaults = &Apache::lonnet::get_domain_defaults($domain); + my $defaultcost = $domdefaults{'intauth_cost'}; + if (($defaultcost eq '') || ($defaultcost =~ /D/)) { + $cost = 10; + } else { + $cost = $defaultcost; + } + # Generate random 16-octet base64 salt + $salt = ""; + $salt .= pack("C", int rand(256)) for 1..16; + } + my $hash = &Crypt::Eksblowfish::Bcrypt::bcrypt_hash({ + key_nul => 1, + cost => $cost, + salt => $salt, + }, Digest::SHA::sha512(Encode::encode('UTF-8',$plainpass))); + + my $result = join("!", "", "bcrypt", sprintf("%02d",$cost), + &Crypt::Eksblowfish::Bcrypt::en_base64($salt). + &Crypt::Eksblowfish::Bcrypt::en_base64($hash)); + return $result; +} + # # Create a new user. User in this case means a lon-capa user. # The user must either already exist in some authentication realm @@ -1767,10 +2298,11 @@ sub add_user_handler { ."makeuser"; } unless ($fperror) { - my $result=&make_passwd_file($uname, $umode,$npass, $passfilename); - &Reply($client, $result, $userinput); #BUGBUG - could be fail + my $result=&make_passwd_file($uname,$udom,$umode,$npass, + $passfilename,'makeuser'); + &Reply($client,\$result, $userinput); #BUGBUG - could be fail } else { - &Failure($client, "$fperror\n", $userinput); + &Failure($client, \$fperror, $userinput); } } umask($oldumask); @@ -1828,37 +2360,31 @@ sub change_authentication_handler { my $passfilename = &password_path($udom, $uname); if ($passfilename) { # Not allowed to create a new user!! # If just changing the unix passwd. need to arrange to run - # passwd since otherwise make_passwd_file will run - # lcuseradd which fails if an account already exists - # (to prevent an unscrupulous LONCAPA admin from stealing - # an existing account by overwriting it as a LonCAPA account). + # passwd since otherwise make_passwd_file will fail as + # creation of unix authenticated users is no longer supported + # except from the command line, when running make_domain_coordinator.pl if(($oldauth =~/^unix/) && ($umode eq "unix")) { my $result = &change_unix_password($uname, $npass); &logthis("Result of password change for $uname: ".$result); if ($result eq "ok") { - &Reply($client, "$result\n") + &update_passwd_history($uname,$udom,$umode,'changeuserauth'); + &Reply($client, \$result); } else { - &Failure($client, "$result\n"); + &Failure($client, \$result); } } else { - my $result=&make_passwd_file($uname, $umode,$npass,$passfilename); + my $result=&make_passwd_file($uname,$udom,$umode,$npass, + $passfilename,'changeuserauth'); # # If the current auth mode is internal, and the old auth mode was # unix, or krb*, and the user is an author for this domain, # re-run manage_permissions for that role in order to be able # to take ownership of the construction space back to www:www # - - - if( (($oldauth =~ /^unix/) && ($umode eq "internal")) || - (($oldauth =~ /^internal/) && ($umode eq "unix")) ) { - if(&is_author($udom, $uname)) { - &Debug(" Need to manage author permissions..."); - &manage_permissions("/$udom/_au", $udom, $uname, "$umode:"); - } - } - &Reply($client, $result, $userinput); + + + &Reply($client, \$result, $userinput); } @@ -1870,6 +2396,17 @@ sub change_authentication_handler { } ®ister_handler("changeuserauth", \&change_authentication_handler, 1,1, 0); +sub update_passwd_history { + my ($uname,$udom,$umode,$context) = @_; + my $proname=&propath($udom,$uname); + my $now = time; + if (open(my $fh,">>$proname/passwd.log")) { + print $fh "$now:$umode:$context\n"; + close($fh); + } + return; +} + # # Determines if this is the home server for a user. The home server # for a user will have his/her lon-capa passwd file. Therefore all we need @@ -1904,16 +2441,10 @@ sub is_home_handler { ®ister_handler("home", \&is_home_handler, 0,1,0); # -# Process an update request for a resource?? I think what's going on here is -# that a resource has been modified that we hold a subscription to. +# Process an update request for a resource. +# A resource has been modified that we hold a subscription to. # If the resource is not local, then we must update, or at least invalidate our # cached copy of the resource. -# FUTURE WORK: -# I need to look at this logic carefully. My druthers would be to follow -# typical caching logic, and simple invalidate the cache, drop any subscription -# an let the next fetch start the ball rolling again... however that may -# actually be more difficult than it looks given the complex web of -# proxy servers. # Parameters: # $cmd - The command that got us here. # $tail - Tail of the command (remaining parameters). @@ -1937,18 +2468,30 @@ sub update_resource_handler { my $ownership=ishome($fname); if ($ownership eq 'not_owner') { if (-e $fname) { + # Delete preview file, if exists + unlink("$fname.tmp"); + # Get usage stats my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size, $atime,$mtime,$ctime,$blksize,$blocks)=stat($fname); my $now=time; my $since=$now-$atime; + # If the file has not been used within lonExpire seconds, + # unsubscribe from it and delete local copy if ($since>$perlvar{'lonExpire'}) { - my $reply=&reply("unsub:$fname","$clientname"); + my $reply=&Apache::lonnet::reply("unsub:$fname","$clientname"); + &devalidate_meta_cache($fname); unlink("$fname"); + unlink("$fname.meta"); } else { + # Yes, this is in active use. Get a fresh copy. Since it might be in + # very active use and huge (like a movie), copy it to "in.transfer" filename first. my $transname="$fname.in.transfer"; - my $remoteurl=&reply("sub:$fname","$clientname"); + my $remoteurl=&Apache::lonnet::reply("sub:$fname","$clientname"); my $response; - alarm(120); +# FIXME: cannot replicate files that take more than two minutes to transfer? +# alarm(120); +# FIXME: this should use the LWP mechanism, not internal alarms. + alarm(1200); { my $ua=new LWP::UserAgent; my $request=new HTTP::Request('GET',"$remoteurl"); @@ -1956,11 +2499,17 @@ sub update_resource_handler { } alarm(0); if ($response->is_error()) { - unlink($transname); + my $reply=&Apache::lonnet::reply("unsub:$fname","$clientname"); + &devalidate_meta_cache($fname); + if (-e $transname) { + unlink($transname); + } + unlink($fname); my $message=$response->status_line; &logthis("LWP GET: $message for $fname ($remoteurl)"); } else { if ($remoteurl!~/\.meta$/) { +# FIXME: isn't there an internal LWP mechanism for this? alarm(120); { my $ua=new LWP::UserAgent; @@ -1972,7 +2521,9 @@ sub update_resource_handler { } alarm(0); } + # we successfully transfered, copy file over to real name rename($transname,$fname); + &devalidate_meta_cache($fname); } } &Reply( $client, "ok\n", $userinput); @@ -1986,6 +2537,16 @@ sub update_resource_handler { } ®ister_handler("update", \&update_resource_handler, 0 ,1, 0); +sub devalidate_meta_cache { + my ($url) = @_; + use Cache::Memcached; + my $memcache = new Cache::Memcached({'servers'=>['127.0.0.1:11211']}); + $url = &Apache::lonnet::declutter($url); + $url =~ s-\.meta$--; + my $id = &escape('meta:'.$url); + $memcache->delete($id); +} + # # Fetch a user file from a remote server to the user's home directory # userfiles subdir. @@ -2022,7 +2583,10 @@ sub fetch_user_file_handler { my $destname=$udir.'/'.$ufile; my $transname=$udir.'/'.$ufile.'.in.transit'; - my $remoteurl='http://'.$clientip.'/userfiles/'.$fname; + my $clientprotocol=$Apache::lonnet::protocol{$clientname}; + $clientprotocol = 'http' if ($clientprotocol ne 'https'); + my $clienthost = &Apache::lonnet::hostname($clientname); + my $remoteurl=$clientprotocol.'://'.$clienthost.'/userfiles/'.$fname; my $response; Debug("Remote URL : $remoteurl Transfername $transname Destname: $destname"); alarm(120); @@ -2044,6 +2608,24 @@ sub fetch_user_file_handler { unlink($transname); &Failure($client, "failed\n", $userinput); } else { + if ($fname =~ /^default.+\.(page|sequence)$/) { + my ($major,$minor) = split(/\./,$clientversion); + if (($major < 2) || ($major == 2 && $minor < 11)) { + my $now = time; + &Apache::lonnet::do_cache_new('crschange',$udom.'_'.$uname,$now,600); + my $key = &escape('internal.contentchange'); + my $what = "$key=$now"; + my $hashref = &tie_user_hash($udom,$uname,'environment', + &GDBM_WRCREAT(),"P",$what); + if ($hashref) { + $hashref->{$key}=$now; + if (!&untie_user_hash($hashref)) { + &logthis("error: ".($!+0)." untie (GDBM) failed ". + "when updating internal.contentchange"); + } + } + } + } &Reply($client, "ok\n", $userinput); } } @@ -2080,11 +2662,20 @@ sub remove_user_file_handler { if (-e $file) { # # If the file is a regular file unlink is fine... - # However it's possible the client wants a dir. - # removed, in which case rmdir is more approprate: + # However it's possible the client wants a dir + # removed, in which case rmdir is more appropriate + # Note: rmdir will only remove an empty directory. # if (-f $file){ unlink($file); + # for html files remove the associated .bak file + # which may have been created by the editor. + if ($ufile =~ m{^((docs|supplemental)/(?:\d+|default)/\d+(?:|/.+)/)[^/]+\.x?html?$}i) { + my $path = $1; + if (-e $file.'.bak') { + unlink($file.'.bak'); + } + } } elsif(-d $file) { rmdir($file); } @@ -2184,6 +2775,36 @@ sub rename_user_file_handler { ®ister_handler("renameuserfile", \&rename_user_file_handler, 0,1,0); # +# Checks if the specified user has an active session on the server +# return ok if so, not_found if not +# +# Parameters: +# cmd - The request keyword that dispatched to tus. +# tail - The tail of the request (colon separated parameters). +# client - Filehandle open on the client. +# Return: +# 1. +sub user_has_session_handler { + my ($cmd, $tail, $client) = @_; + + my ($udom, $uname) = map { &unescape($_) } (split(/:/, $tail)); + + opendir(DIR,$perlvar{'lonIDsDir'}); + my $filename; + while ($filename=readdir(DIR)) { + last if ($filename=~/^\Q$uname\E_\d+_\Q$udom\E_/); + } + if ($filename) { + &Reply($client, "ok\n", "$cmd:$tail"); + } else { + &Failure($client, "not_found\n", "$cmd:$tail"); + } + return 1; + +} +®ister_handler("userhassession", \&user_has_session_handler, 0,1,0); + +# # Authenticate access to a user file by checking that the token the user's # passed also exists in their session file # @@ -2199,14 +2820,24 @@ sub token_auth_user_file_handler { my ($fname, $session) = split(/:/, $tail); chomp($session); - my $reply="non_auth\n"; - if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'. - $session.'.id')) { - while (my $line=) { - if ($line=~ m|userfile\.\Q$fname\E\=|) { $reply="ok\n"; } + my $reply="non_auth"; + my $file = $perlvar{'lonIDsDir'}.'/'.$session.'.id'; + if (open(ENVIN,"$file")) { + flock(ENVIN,LOCK_SH); + tie(my %disk_env,'GDBM_File',"$file",&GDBM_READER(),0640); + if (exists($disk_env{"userfile.$fname"})) { + $reply="ok"; + } else { + foreach my $envname (keys(%disk_env)) { + if ($envname=~ m|^userfile\.\Q$fname\E|) { + $reply="ok"; + last; + } + } } + untie(%disk_env); close(ENVIN); - &Reply($client, $reply, "$cmd:$tail"); + &Reply($client, \$reply, "$cmd:$tail"); } else { &Failure($client, "invalid_token\n", "$cmd:$tail"); } @@ -2266,13 +2897,13 @@ sub subscribe_handler { ®ister_handler("sub", \&subscribe_handler, 0, 1, 0); # -# Determine the version of a resource (?) Or is it return -# the top version of the resource? Not yet clear from the -# code in currentversion. +# Determine the latest version of a resource (it looks for the highest +# past version and then returns that +1) # # Parameters: # $cmd - The command that got us here. # $tail - Tail of the command (remaining parameters). +# (Should consist of an absolute path to a file) # $client - File descriptor connected to client. # Returns # 0 - Requested to exit, caller should shut down. @@ -2354,7 +2985,7 @@ sub put_user_profile_entry { my ($key,$value)=split(/=/,$pair); $hashref->{$key}=$value; } - if (untie(%$hashref)) { + if (&untie_user_hash($hashref)) { &Reply( $client, "ok\n", $userinput); } else { &Failure($client, "error: ".($!+0)." untie(GDBM) failed ". @@ -2362,7 +2993,7 @@ sub put_user_profile_entry { $userinput); } } else { - &Failure( $client, "error: ".($!)." tie(GDBM) Failed ". + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". "while attempting put\n", $userinput); } } else { @@ -2398,7 +3029,7 @@ sub newput_user_profile_entry { my $hashref = &tie_user_hash($udom, $uname, $namespace, &GDBM_WRCREAT(),"N",$what); if(!$hashref) { - &Failure( $client, "error: ".($!)." tie(GDBM) Failed ". + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". "while attempting put\n", $userinput); return 1; } @@ -2407,6 +3038,10 @@ sub newput_user_profile_entry { foreach my $pair (@pairs) { my ($key,$value)=split(/=/,$pair); if (exists($hashref->{$key})) { + if (!&untie_user_hash($hashref)) { + &logthis("error: ".($!+0)." untie (GDBM) failed ". + "while attempting newput - early out as key exists"); + } &Failure($client, "key_exists: ".$key."\n",$userinput); return 1; } @@ -2417,7 +3052,7 @@ sub newput_user_profile_entry { $hashref->{$key}=$value; } - if (untie(%$hashref)) { + if (&untie_user_hash($hashref)) { &Reply( $client, "ok\n", $userinput); } else { &Failure($client, "error: ".($!+0)." untie(GDBM) failed ". @@ -2470,7 +3105,7 @@ sub increment_user_value_handler { } } } - if (untie(%$hashref)) { + if (&untie_user_hash($hashref)) { &Reply( $client, "ok\n", $userinput); } else { &Failure($client, "error: ".($!+0)." untie(GDBM) failed ". @@ -2537,7 +3172,7 @@ sub roles_put_handler { $auth_type); $hashref->{$key}=$value; } - if (untie($hashref)) { + if (&untie_user_hash($hashref)) { &Reply($client, "ok\n", $userinput); } else { &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". @@ -2588,7 +3223,7 @@ sub roles_delete_handler { foreach my $key (@rolekeys) { delete $hashref->{$key}; } - if (untie(%$hashref)) { + if (&untie_user_hash($hashref)) { &Reply($client, "ok\n", $userinput); } else { &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". @@ -2630,10 +3265,11 @@ sub get_profile_entry { my ($udom,$uname,$namespace,$what) = split(/:/,$tail); chomp($what); + my $replystring = read_profile($udom, $uname, $namespace, $what); my ($first) = split(/:/,$replystring); if($first ne "error") { - &Reply($client, "$replystring\n", $userinput); + &Reply($client, \$replystring, $userinput); } else { &Failure($client, $replystring." while attempting get\n", $userinput); } @@ -2657,7 +3293,8 @@ sub get_profile_entry { # # Parameters: # $cmd - Command keyword of request (eget). -# $tail - Tail of the command. See GetProfileEntry # for more information about this. +# $tail - Tail of the command. See GetProfileEntry +# for more information about this. # $client - File open on the client. # Returns: # 1 - Continue processing @@ -2667,7 +3304,7 @@ sub get_profile_entry_encrypted { my $userinput = "$cmd:$tail"; - my ($cmd,$udom,$uname,$namespace,$what) = split(/:/,$userinput); + my ($udom,$uname,$namespace,$what) = split(/:/,$tail); chomp($what); my $qresult = read_profile($udom, $uname, $namespace, $what); my ($first) = split(/:/, $qresult); @@ -2729,7 +3366,7 @@ sub delete_profile_entry { foreach my $key (@keys) { delete($hashref->{$key}); } - if (untie(%$hashref)) { + if (&untie_user_hash($hashref)) { &Reply($client, "ok\n", $userinput); } else { &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". @@ -2771,9 +3408,9 @@ sub get_profile_keys { foreach my $key (keys %$hashref) { $qresult.="$key&"; } - if (untie(%$hashref)) { + if (&untie_user_hash($hashref)) { $qresult=~s/\&$//; - &Reply($client, "$qresult\n", $userinput); + &Reply($client, \$qresult, $userinput); } else { &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". "while attempting keys\n", $userinput); @@ -2832,7 +3469,7 @@ sub dump_profile_database { $data{$symb}->{$param}=$value; $data{$symb}->{'v.'.$param}=$v; } - if (untie(%$hashref)) { + if (&untie_user_hash($hashref)) { while (my ($symb,$param_hash) = each(%data)) { while(my ($param,$value) = each (%$param_hash)){ next if ($param =~ /^v\./); # Ignore versions... @@ -2843,7 +3480,7 @@ sub dump_profile_database { } } chop($qresult); - &Reply($client , "$qresult\n", $userinput); + &Reply($client , \$qresult, $userinput); } else { &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". "while attempting currentdump\n", $userinput); @@ -2875,6 +3512,9 @@ sub dump_profile_database { # that is matched against # database keywords to do # selective dumps. +# range - optional range of entries +# e.g., 10-20 would return the +# 10th to 19th items, etc. # $client - Channel open on the client. # Returns: # 1 - Continue processing. @@ -2884,39 +3524,12 @@ sub dump_profile_database { sub dump_with_regexp { my ($cmd, $tail, $client) = @_; + my $res = LONCAPA::Lond::dump_with_regexp($tail, $clientversion); - my $userinput = "$cmd:$tail"; - - my ($udom,$uname,$namespace,$regexp)=split(/:/,$tail); - if (defined($regexp)) { - $regexp=&unescape($regexp); - } else { - $regexp='.'; - } - my $hashref = &tie_user_hash($udom, $uname, $namespace, - &GDBM_READER()); - if ($hashref) { - my $qresult=''; - while (my ($key,$value) = each(%$hashref)) { - if ($regexp eq '.') { - $qresult.=$key.'='.$value.'&'; - } else { - my $unescapeKey = &unescape($key); - if (eval('$unescapeKey=~/$regexp/')) { - $qresult.="$key=$value&"; - } - } - } - if (untie(%$hashref)) { - chop($qresult); - &Reply($client, "$qresult\n", $userinput); - } else { - &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting dump\n", $userinput); - } + if ($res =~ /^error:/) { + &Failure($client, \$res, "$cmd:$tail"); } else { - &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting dump\n", $userinput); + &Reply($client, \$res, "$cmd:$tail"); } return 1; @@ -2933,6 +3546,9 @@ sub dump_with_regexp { # namespace - Name of the database being modified # rid - Resource keyword to modify. # what - new value associated with rid. +# laststore - (optional) version=timestamp +# for most recent transaction for rid +# in namespace, when cstore was called # # $client - Socket open on the client. # @@ -2941,23 +3557,47 @@ sub dump_with_regexp { # 1 (keep on processing). # Side-Effects: # Writes to the client +# Successful storage will cause either 'ok', or, if $laststore was included +# in the tail of the request, and the version number for the last transaction +# is larger than the version in $laststore, delay:$numtrans , where $numtrans +# is the number of store evevnts recorded for rid in namespace since +# lonnet::store() was called by the client. +# sub store_handler { my ($cmd, $tail, $client) = @_; my $userinput = "$cmd:$tail"; - my ($udom,$uname,$namespace,$rid,$what) =split(/:/,$tail); + chomp($tail); + my ($udom,$uname,$namespace,$rid,$what,$laststore) =split(/:/,$tail); if ($namespace ne 'roles') { - chomp($what); my @pairs=split(/\&/,$what); my $hashref = &tie_user_hash($udom, $uname, $namespace, &GDBM_WRCREAT(), "S", "$rid:$what"); if ($hashref) { my $now = time; - my @previouskeys=split(/&/,$hashref->{"keys:$rid"}); - my $key; + my $numtrans; + if ($laststore) { + my ($previousversion,$previoustime) = split(/\=/,$laststore); + my ($lastversion,$lasttime) = (0,0); + $lastversion = $hashref->{"version:$rid"}; + if ($lastversion) { + $lasttime = $hashref->{"$lastversion:$rid:timestamp"}; + } + if (($previousversion) && ($previousversion !~ /\D/)) { + if (($lastversion > $previousversion) && ($lasttime >= $previoustime)) { + $numtrans = $lastversion - $previousversion; + } + } elsif ($lastversion) { + $numtrans = $lastversion; + } + if ($numtrans) { + $numtrans =~ s/D//g; + } + } + $hashref->{"version:$rid"}++; my $version=$hashref->{"version:$rid"}; my $allkeys=''; @@ -2969,8 +3609,12 @@ sub store_handler { $hashref->{"$version:$rid:timestamp"}=$now; $allkeys.='timestamp'; $hashref->{"$version:keys:$rid"}=$allkeys; - if (untie($hashref)) { - &Reply($client, "ok\n", $userinput); + if (&untie_user_hash($hashref)) { + my $msg = 'ok'; + if ($numtrans) { + $msg = 'delay:'.$numtrans; + } + &Reply($client, "$msg\n", $userinput); } else { &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". "while attempting store\n", $userinput); @@ -2987,6 +3631,85 @@ sub store_handler { } ®ister_handler("store", \&store_handler, 0, 1, 0); +# Modify a set of key=value pairs associated with a versioned name. +# +# Parameters: +# $cmd - Request command keyword. +# $tail - Tail of the request. This is a colon +# separated list containing: +# domain/user - User and authentication domain. +# namespace - Name of the database being modified +# rid - Resource keyword to modify. +# v - Version item to modify +# what - new value associated with rid. +# +# $client - Socket open on the client. +# +# +# Returns: +# 1 (keep on processing). +# Side-Effects: +# Writes to the client +sub putstore_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + my ($udom,$uname,$namespace,$rid,$v,$what) =split(/:/,$tail); + if ($namespace ne 'roles') { + + chomp($what); + my $hashref = &tie_user_hash($udom, $uname, $namespace, + &GDBM_WRCREAT(), "M", + "$rid:$v:$what"); + if ($hashref) { + my $now = time; + my %data = &hash_extract($what); + my @allkeys; + while (my($key,$value) = each(%data)) { + push(@allkeys,$key); + $hashref->{"$v:$rid:$key"} = $value; + } + my $allkeys = join(':',@allkeys); + $hashref->{"$v:keys:$rid"}=$allkeys; + + if (&untie_user_hash($hashref)) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting store\n", $userinput); + } + } else { + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting store\n", $userinput); + } + } else { + &Failure($client, "refused\n", $userinput); + } + + return 1; +} +®ister_handler("putstore", \&putstore_handler, 0, 1, 0); + +sub hash_extract { + my ($str)=@_; + my %hash; + foreach my $pair (split(/\&/,$str)) { + my ($key,$value)=split(/=/,$pair); + $hash{$key}=$value; + } + return (%hash); +} +sub hash_to_str { + my ($hash_ref)=@_; + my $str; + foreach my $key (keys(%$hash_ref)) { + $str.=$key.'='.$hash_ref->{$key}.'&'; + } + $str=~s/\&$//; + return $str; +} + # # Dump out all versions of a resource that has key=value pairs associated # with it for each version. These resources are built up via the store @@ -3016,31 +3739,29 @@ sub restore_handler { my ($cmd, $tail, $client) = @_; my $userinput = "$cmd:$tail"; # Only used for logging purposes. - - my ($cmd,$udom,$uname,$namespace,$rid) = split(/:/,$userinput); + my ($udom,$uname,$namespace,$rid) = split(/:/,$tail); $namespace=~s/\//\_/g; - $namespace=~s/\W//g; + $namespace = &LONCAPA::clean_username($namespace); + chomp($rid); - my $proname=&propath($udom,$uname); my $qresult=''; - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db", - &GDBM_READER(),0640)) { - my $version=$hash{"version:$rid"}; + my $hashref = &tie_user_hash($udom, $uname, $namespace, &GDBM_READER()); + if ($hashref) { + my $version=$hashref->{"version:$rid"}; $qresult.="version=$version&"; my $scope; for ($scope=1;$scope<=$version;$scope++) { - my $vkeys=$hash{"$scope:keys:$rid"}; + my $vkeys=$hashref->{"$scope:keys:$rid"}; my @keys=split(/:/,$vkeys); my $key; $qresult.="$scope:keys=$vkeys&"; foreach $key (@keys) { - $qresult.="$scope:$key=".$hash{"$scope:$rid:$key"}."&"; + $qresult.="$scope:$key=".$hashref->{"$scope:$rid:$key"}."&"; } } - if (untie(%hash)) { + if (&untie_user_hash($hashref)) { $qresult=~s/\&$//; - &Reply( $client, "$qresult\n", $userinput); + &Reply( $client, \$qresult, $userinput); } else { &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". "while attempting restore\n", $userinput); @@ -3057,15 +3778,17 @@ sub restore_handler { ®ister_handler("restore", \&restore_handler, 0,1,0); # -# Add a chat message to to a discussion board. +# Add a chat message to a synchronous discussion board. # # Parameters: # $cmd - Request keyword. # $tail - Tail of the command. A colon separated list # containing: # cdom - Domain on which the chat board lives -# cnum - Identifier of the discussion group. -# post - Body of the posting. +# cnum - Course containing the chat board. +# newpost - Body of the posting. +# group - Optional group, if chat board is only +# accessible in a group within the course # $client - Socket open on the client. # Returns: # 1 - Indicating caller should keep on processing. @@ -3080,8 +3803,8 @@ sub send_chat_handler { my $userinput = "$cmd:$tail"; - my ($cdom,$cnum,$newpost)=split(/\:/,$tail); - &chat_add($cdom,$cnum,$newpost); + my ($cdom,$cnum,$newpost,$group)=split(/\:/,$tail); + &chat_add($cdom,$cnum,$newpost,$group); &Reply($client, "ok\n", $userinput); return 1; @@ -3089,7 +3812,7 @@ sub send_chat_handler { ®ister_handler("chatsend", \&send_chat_handler, 0, 1, 0); # -# Retrieve the set of chat messagss from a discussion board. +# Retrieve the set of chat messages from a discussion board. # # Parameters: # $cmd - Command keyword that initiated the request. @@ -3099,6 +3822,8 @@ sub send_chat_handler { # chat id - Discussion thread(?) # domain/user - Authentication domain and username # of the requesting person. +# group - Optional course group containing +# the board. # $client - Socket open on the client program. # Returns: # 1 - continue processing @@ -3111,13 +3836,13 @@ sub retrieve_chat_handler { my $userinput = "$cmd:$tail"; - my ($cdom,$cnum,$udom,$uname)=split(/\:/,$tail); + my ($cdom,$cnum,$udom,$uname,$group)=split(/\:/,$tail); my $reply=''; - foreach (&get_chat($cdom,$cnum,$udom,$uname)) { + foreach (&get_chat($cdom,$cnum,$udom,$uname,$group)) { $reply.=&escape($_).':'; } $reply=~s/\:$//; - &Reply($client, $reply."\n", $userinput); + &Reply($client, \$reply, $userinput); return 1; @@ -3151,6 +3876,37 @@ sub send_query_handler { my ($query,$arg1,$arg2,$arg3)=split(/\:/,$tail); $query=~s/\n*$//g; + if (($query eq 'usersearch') || ($query eq 'instdirsearch')) { + my $usersearchconf = &get_usersearch_config($currentdomainid,'directorysrch'); + my $earlyout; + if (ref($usersearchconf) eq 'HASH') { + if ($currentdomainid eq $clienthomedom) { + if ($query eq 'usersearch') { + if ($usersearchconf->{'lcavailable'} eq '0') { + $earlyout = 1; + } + } else { + if ($usersearchconf->{'available'} eq '0') { + $earlyout = 1; + } + } + } else { + if ($query eq 'usersearch') { + if ($usersearchconf->{'lclocalonly'}) { + $earlyout = 1; + } + } else { + if ($usersearchconf->{'localonly'}) { + $earlyout = 1; + } + } + } + } + if ($earlyout) { + &Reply($client, "query_not_authorized\n"); + return 1; + } + } &Reply($client, "". &sql_reply("$clientname\&$query". "\&$arg1"."\&$arg2"."\&$arg3")."\n", $userinput); @@ -3190,7 +3946,7 @@ sub reply_query_handler { my $userinput = "$cmd:$tail"; - my ($cmd,$id,$reply)=split(/:/,$userinput); + my ($id,$reply)=split(/:/,$tail); my $store; my $execdir=$perlvar{'lonDaemons'}; if ($store=IO::File->new(">$execdir/tmp/$id")) { @@ -3254,24 +4010,41 @@ sub put_course_id_handler { foreach my $pair (@pairs) { my ($key,$courseinfo) = split(/=/,$pair,2); $courseinfo =~ s/=/:/g; - - my @current_items = split(/:/,$hashref->{$key}); + if (defined($hashref->{$key})) { + my $value = &Apache::lonnet::thaw_unescape($hashref->{$key}); + if (ref($value) eq 'HASH') { + my @items = ('description','inst_code','owner','type'); + my @new_items = split(/:/,$courseinfo,-1); + my %storehash; + for (my $i=0; $i<@new_items; $i++) { + $storehash{$items[$i]} = &unescape($new_items[$i]); + } + $hashref->{$key} = + &Apache::lonnet::freeze_escape(\%storehash); + my $unesc_key = &unescape($key); + $hashref->{&escape('lasttime:'.$unesc_key)} = $now; + next; + } + } + my @current_items = split(/:/,$hashref->{$key},-1); shift(@current_items); # remove description pop(@current_items); # remove last access my $numcurrent = scalar(@current_items); - - my @new_items = split(/:/,$courseinfo); + if ($numcurrent > 3) { + $numcurrent = 3; + } + my @new_items = split(/:/,$courseinfo,-1); my $numnew = scalar(@new_items); if ($numcurrent > 0) { - if ($numnew == 1) { # flushcourselogs() from 1.1 or earlier - $courseinfo .= ':'.join(':',@current_items); - } elsif ($numnew == 2) { # flushcourselogs() from 1.2.X - $courseinfo .= ':'.$current_items[$numcurrent-1]; + if ($numnew <= $numcurrent) { # flushcourselogs() from pre 2.2 + for (my $j=$numcurrent-$numnew; $j>=0; $j--) { + $courseinfo .= ':'.$current_items[$numcurrent-$j-1]; + } } } - $hashref->{$key}=$courseinfo.':'.$now; + $hashref->{$key}=$courseinfo.':'.$now; } - if (untie(%$hashref)) { + if (&untie_domain_hash($hashref)) { &Reply( $client, "ok\n", $userinput); } else { &Failure($client, "error: ".($!+0) @@ -3283,12 +4056,54 @@ sub put_course_id_handler { ." tie(GDBM) Failed ". "while attempting courseidput\n", $userinput); } - return 1; } ®ister_handler("courseidput", \&put_course_id_handler, 0, 1, 0); +sub put_course_id_hash_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($udom,$mode,$what) = split(/:/, $tail,3); + chomp($what); + my $now=time; + my @pairs=split(/\&/,$what); + my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT()); + if ($hashref) { + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + my $unesc_key = &unescape($key); + if ($mode ne 'timeonly') { + if (!defined($hashref->{&escape('lasttime:'.$unesc_key)})) { + my $curritems = &Apache::lonnet::thaw_unescape($key); + if (ref($curritems) ne 'HASH') { + my @current_items = split(/:/,$hashref->{$key},-1); + my $lasttime = pop(@current_items); + $hashref->{&escape('lasttime:'.$unesc_key)} = $lasttime; + } else { + $hashref->{&escape('lasttime:'.$unesc_key)} = ''; + } + } + $hashref->{$key} = $value; + } + if ($mode ne 'notime') { + $hashref->{&escape('lasttime:'.$unesc_key)} = $now; + } + } + if (&untie_domain_hash($hashref)) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting courseidputhash\n", $userinput); + } + } else { + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting courseidputhash\n", $userinput); + } + return 1; +} +®ister_handler("courseidputhash", \&put_course_id_hash_handler, 0, 1, 0); + # Retrieves the value of a course id resource keyword pattern # defined since a starting date. Both the starting date and the # keyword pattern are optional. If the starting date is not supplied it @@ -3310,12 +4125,46 @@ sub put_course_id_handler { # institutional code - optional supplied code to filter # the dump. Only courses with an institutional code # that match the supplied code will be returned. -# owner - optional supplied username of owner to filter -# the dump. Only courses for which the course -# owner matches the supplied username will be -# returned. Implicit assumption that owner -# is a user in the domain in which the -# course database is defined. +# owner - optional supplied username and domain of owner to +# filter the dump. Only courses for which the course +# owner matches the supplied username and/or domain +# will be returned. Pre-2.2.0 legacy entries from +# nohist_courseiddump will only contain usernames. +# type - optional parameter for selection +# regexp_ok - if 1 or -1 allow the supplied institutional code +# filter to behave as a regular expression: +# 1 will not exclude the course if the instcode matches the RE +# -1 will exclude the course if the instcode matches the RE +# rtn_as_hash - whether to return the information available for +# each matched item as a frozen hash of all +# key, value pairs in the item's hash, or as a +# colon-separated list of (in order) description, +# institutional code, and course owner. +# selfenrollonly - filter by courses allowing self-enrollment +# now or in the future (selfenrollonly = 1). +# catfilter - filter by course category, assigned to a course +# using manually defined categories (i.e., not +# self-cataloging based on on institutional code). +# showhidden - include course in results even if course +# was set to be excluded from course catalog (DC only). +# caller - if set to 'coursecatalog', courses set to be hidden +# from course catalog will be excluded from results (unless +# overridden by "showhidden". +# cloner - escaped username:domain of course cloner (if picking course to +# clone). +# cc_clone_list - escaped comma separated list of courses for which +# course cloner has active CC role (and so can clone +# automatically). +# cloneonly - filter by courses for which cloner has rights to clone. +# createdbefore - include courses for which creation date preceeded this date. +# createdafter - include courses for which creation date followed this date. +# creationcontext - include courses created in specified context +# +# domcloner - flag to indicate if user can create CCs in course's domain. +# If so, ability to clone course is automatic. +# hasuniquecode - filter by courses for which a six character unique code has +# been set. +# # $client - The socket open on the client. # Returns: # 1 - Continue processing. @@ -3323,10 +4172,14 @@ sub put_course_id_handler { # a reply is written to $client. sub dump_course_id_handler { my ($cmd, $tail, $client) = @_; - my $userinput = "$cmd:$tail"; - my ($udom,$since,$description,$instcodefilter,$ownerfilter,$coursefilter) =split(/:/,$tail); + my ($udom,$since,$description,$instcodefilter,$ownerfilter,$coursefilter, + $typefilter,$regexp_ok,$rtn_as_hash,$selfenrollonly,$catfilter,$showhidden, + $caller,$cloner,$cc_clone_list,$cloneonly,$createdbefore,$createdafter, + $creationcontext,$domcloner,$hasuniquecode) =split(/:/,$tail); + my $now = time; + my ($cloneruname,$clonerudom,%cc_clone); if (defined($description)) { $description=&unescape($description); } else { @@ -3337,59 +4190,333 @@ sub dump_course_id_handler { } else { $instcodefilter='.'; } + my ($ownerunamefilter,$ownerdomfilter); if (defined($ownerfilter)) { $ownerfilter=&unescape($ownerfilter); + if ($ownerfilter ne '.' && defined($ownerfilter)) { + if ($ownerfilter =~ /^([^:]*):([^:]*)$/) { + $ownerunamefilter = $1; + $ownerdomfilter = $2; + } else { + $ownerunamefilter = $ownerfilter; + $ownerdomfilter = ''; + } + } } else { $ownerfilter='.'; } + if (defined($coursefilter)) { $coursefilter=&unescape($coursefilter); } else { $coursefilter='.'; } - - unless (defined($since)) { $since=0; } + if (defined($typefilter)) { + $typefilter=&unescape($typefilter); + } else { + $typefilter='.'; + } + if (defined($regexp_ok)) { + $regexp_ok=&unescape($regexp_ok); + } + if (defined($catfilter)) { + $catfilter=&unescape($catfilter); + } + if (defined($cloner)) { + $cloner = &unescape($cloner); + ($cloneruname,$clonerudom) = ($cloner =~ /^($LONCAPA::match_username):($LONCAPA::match_domain)$/); + } + if (defined($cc_clone_list)) { + $cc_clone_list = &unescape($cc_clone_list); + my @cc_cloners = split('&',$cc_clone_list); + foreach my $cid (@cc_cloners) { + my ($clonedom,$clonenum) = split(':',$cid); + next if ($clonedom ne $udom); + $cc_clone{$clonedom.'_'.$clonenum} = 1; + } + } + if ($createdbefore ne '') { + $createdbefore = &unescape($createdbefore); + } else { + $createdbefore = 0; + } + if ($createdafter ne '') { + $createdafter = &unescape($createdafter); + } else { + $createdafter = 0; + } + if ($creationcontext ne '') { + $creationcontext = &unescape($creationcontext); + } else { + $creationcontext = '.'; + } + unless ($hasuniquecode) { + $hasuniquecode = '.'; + } + my $unpack = 1; + if ($description eq '.' && $instcodefilter eq '.' && $ownerfilter eq '.' && + $typefilter eq '.') { + $unpack = 0; + } + if (!defined($since)) { $since=0; } my $qresult=''; my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT()); if ($hashref) { while (my ($key,$value) = each(%$hashref)) { - my ($descr,$lasttime,$inst_code,$owner); - my @courseitems = split(/:/,$value); - $lasttime = pop(@courseitems); - ($descr,$inst_code,$owner)=@courseitems; - if ($lasttime<$since) { next; } + my ($unesc_key,$lasttime_key,$lasttime,$is_hash,%val, + %unesc_val,$selfenroll_end,$selfenroll_types,$created, + $context); + $unesc_key = &unescape($key); + if ($unesc_key =~ /^lasttime:/) { + next; + } else { + $lasttime_key = &escape('lasttime:'.$unesc_key); + } + if ($hashref->{$lasttime_key} ne '') { + $lasttime = $hashref->{$lasttime_key}; + next if ($lasttime<$since); + } + my ($canclone,$valchange); + my $items = &Apache::lonnet::thaw_unescape($value); + if (ref($items) eq 'HASH') { + if ($hashref->{$lasttime_key} eq '') { + next if ($since > 1); + } + $is_hash = 1; + if ($domcloner) { + $canclone = 1; + } elsif (defined($clonerudom)) { + if ($items->{'cloners'}) { + my @cloneable = split(',',$items->{'cloners'}); + if (@cloneable) { + if (grep(/^\*$/,@cloneable)) { + $canclone = 1; + } elsif (grep(/^\*:\Q$clonerudom\E$/,@cloneable)) { + $canclone = 1; + } elsif (grep(/^\Q$cloneruname\E:\Q$clonerudom\E$/,@cloneable)) { + $canclone = 1; + } + } + unless ($canclone) { + if ($cloneruname ne '' && $clonerudom ne '') { + if ($cc_clone{$unesc_key}) { + $canclone = 1; + $items->{'cloners'} .= ','.$cloneruname.':'. + $clonerudom; + $valchange = 1; + } + } + } + } elsif (defined($cloneruname)) { + if ($cc_clone{$unesc_key}) { + $canclone = 1; + $items->{'cloners'} = $cloneruname.':'.$clonerudom; + $valchange = 1; + } + unless ($canclone) { + if ($items->{'owner'} =~ /:/) { + if ($items->{'owner'} eq $cloner) { + $canclone = 1; + } + } elsif ($cloner eq $items->{'owner'}.':'.$udom) { + $canclone = 1; + } + if ($canclone) { + $items->{'cloners'} = $cloneruname.':'.$clonerudom; + $valchange = 1; + } + } + } + } + if ($unpack || !$rtn_as_hash) { + $unesc_val{'descr'} = $items->{'description'}; + $unesc_val{'inst_code'} = $items->{'inst_code'}; + $unesc_val{'owner'} = $items->{'owner'}; + $unesc_val{'type'} = $items->{'type'}; + $unesc_val{'cloners'} = $items->{'cloners'}; + $unesc_val{'created'} = $items->{'created'}; + $unesc_val{'context'} = $items->{'context'}; + } + $selfenroll_types = $items->{'selfenroll_types'}; + $selfenroll_end = $items->{'selfenroll_end_date'}; + $created = $items->{'created'}; + $context = $items->{'context'}; + if ($hasuniquecode ne '.') { + next unless ($items->{'uniquecode'}); + } + if ($selfenrollonly) { + next if (!$selfenroll_types); + if (($selfenroll_end > 0) && ($selfenroll_end <= $now)) { + next; + } + } + if ($creationcontext ne '.') { + next if (($context ne '') && ($context ne $creationcontext)); + } + if ($createdbefore > 0) { + next if (($created eq '') || ($created > $createdbefore)); + } + if ($createdafter > 0) { + next if (($created eq '') || ($created <= $createdafter)); + } + if ($catfilter ne '') { + next if ($items->{'categories'} eq ''); + my @categories = split('&',$items->{'categories'}); + next if (@categories == 0); + my @subcats = split('&',$catfilter); + my $matchcat = 0; + foreach my $cat (@categories) { + if (grep(/^\Q$cat\E$/,@subcats)) { + $matchcat = 1; + last; + } + } + next if (!$matchcat); + } + if ($caller eq 'coursecatalog') { + if ($items->{'hidefromcat'} eq 'yes') { + next if !$showhidden; + } + } + } else { + next if ($catfilter ne ''); + next if ($selfenrollonly); + next if ($createdbefore || $createdafter); + next if ($creationcontext ne '.'); + if ((defined($clonerudom)) && (defined($cloneruname))) { + if ($cc_clone{$unesc_key}) { + $canclone = 1; + $val{'cloners'} = &escape($cloneruname.':'.$clonerudom); + } + } + $is_hash = 0; + my @courseitems = split(/:/,$value); + $lasttime = pop(@courseitems); + if ($hashref->{$lasttime_key} eq '') { + next if ($lasttime<$since); + } + ($val{'descr'},$val{'inst_code'},$val{'owner'},$val{'type'}) = @courseitems; + } + if ($cloneonly) { + next unless ($canclone); + } my $match = 1; - unless ($description eq '.') { - my $unescapeDescr = &unescape($descr); - unless (eval('$unescapeDescr=~/\Q$description\E/i')) { + if ($description ne '.') { + if (!$is_hash) { + $unesc_val{'descr'} = &unescape($val{'descr'}); + } + if (eval{$unesc_val{'descr'} !~ /\Q$description\E/i}) { $match = 0; - } + } } - unless ($instcodefilter eq '.' || !defined($instcodefilter)) { - my $unescapeInstcode = &unescape($inst_code); - unless (eval('$unescapeInstcode=~/\Q$instcodefilter\E/i')) { - $match = 0; + if ($instcodefilter ne '.') { + if (!$is_hash) { + $unesc_val{'inst_code'} = &unescape($val{'inst_code'}); + } + if ($regexp_ok == 1) { + if (eval{$unesc_val{'inst_code'} !~ /$instcodefilter/}) { + $match = 0; + } + } elsif ($regexp_ok == -1) { + if (eval{$unesc_val{'inst_code'} =~ /$instcodefilter/}) { + $match = 0; + } + } else { + if (eval{$unesc_val{'inst_code'} !~ /\Q$instcodefilter\E/i}) { + $match = 0; + } } } - unless ($ownerfilter eq '.' || !defined($ownerfilter)) { - my $unescapeOwner = &unescape($owner); - unless (eval('$unescapeOwner=~/\Q$ownerfilter\E/i')) { - $match = 0; + if ($ownerfilter ne '.') { + if (!$is_hash) { + $unesc_val{'owner'} = &unescape($val{'owner'}); + } + if (($ownerunamefilter ne '') && ($ownerdomfilter ne '')) { + if ($unesc_val{'owner'} =~ /:/) { + if (eval{$unesc_val{'owner'} !~ + /\Q$ownerunamefilter\E:\Q$ownerdomfilter\E$/i}) { + $match = 0; + } + } else { + if (eval{$unesc_val{'owner'} !~ /\Q$ownerunamefilter\E/i}) { + $match = 0; + } + } + } elsif ($ownerunamefilter ne '') { + if ($unesc_val{'owner'} =~ /:/) { + if (eval{$unesc_val{'owner'} !~ /\Q$ownerunamefilter\E:[^:]+$/i}) { + $match = 0; + } + } else { + if (eval{$unesc_val{'owner'} !~ /\Q$ownerunamefilter\E/i}) { + $match = 0; + } + } + } elsif ($ownerdomfilter ne '') { + if ($unesc_val{'owner'} =~ /:/) { + if (eval{$unesc_val{'owner'} !~ /^[^:]+:\Q$ownerdomfilter\E/}) { + $match = 0; + } + } else { + if ($ownerdomfilter ne $udom) { + $match = 0; + } + } } } - unless ($coursefilter eq '.' || !defined($coursefilter)) { - my $unescapeCourse = &unescape($key); - unless (eval('$unescapeCourse=~/^$udom(_)\Q$coursefilter\E$/')) { + if ($coursefilter ne '.') { + if (eval{$unesc_key !~ /^$udom(_)\Q$coursefilter\E$/}) { $match = 0; } } + if ($typefilter ne '.') { + if (!$is_hash) { + $unesc_val{'type'} = &unescape($val{'type'}); + } + if ($unesc_val{'type'} eq '') { + if ($typefilter ne 'Course') { + $match = 0; + } + } else { + if (eval{$unesc_val{'type'} !~ /^\Q$typefilter\E$/}) { + $match = 0; + } + } + } if ($match == 1) { - $qresult.=$key.'='.$descr.':'.$inst_code.':'.$owner.'&'; + if ($rtn_as_hash) { + if ($is_hash) { + if ($valchange) { + my $newvalue = &Apache::lonnet::freeze_escape($items); + $qresult.=$key.'='.$newvalue.'&'; + } else { + $qresult.=$key.'='.$value.'&'; + } + } else { + my %rtnhash = ( 'description' => &unescape($val{'descr'}), + 'inst_code' => &unescape($val{'inst_code'}), + 'owner' => &unescape($val{'owner'}), + 'type' => &unescape($val{'type'}), + 'cloners' => &unescape($val{'cloners'}), + ); + my $items = &Apache::lonnet::freeze_escape(\%rtnhash); + $qresult.=$key.'='.$items.'&'; + } + } else { + if ($is_hash) { + $qresult .= $key.'='.&escape($unesc_val{'descr'}).':'. + &escape($unesc_val{'inst_code'}).':'. + &escape($unesc_val{'owner'}).'&'; + } else { + $qresult .= $key.'='.$val{'descr'}.':'.$val{'inst_code'}. + ':'.$val{'owner'}.'&'; + } + } } } - if (untie(%$hashref)) { + if (&untie_domain_hash($hashref)) { chop($qresult); - &Reply($client, "$qresult\n", $userinput); + &Reply($client, \$qresult, $userinput); } else { &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". "while attempting courseiddump\n", $userinput); @@ -3398,11 +4525,187 @@ sub dump_course_id_handler { &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". "while attempting courseiddump\n", $userinput); } + return 1; +} +®ister_handler("courseiddump", \&dump_course_id_handler, 0, 1, 0); + +sub course_lastaccess_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($cdom,$cnum) = split(':',$tail); + my (%lastaccess,$qresult); + my $hashref = &tie_domain_hash($cdom, "nohist_courseids", &GDBM_WRCREAT()); + if ($hashref) { + while (my ($key,$value) = each(%$hashref)) { + my ($unesc_key,$lasttime); + $unesc_key = &unescape($key); + if ($cnum) { + next unless ($unesc_key =~ /\Q$cdom\E_\Q$cnum\E$/); + } + if ($unesc_key =~ /^lasttime:($LONCAPA::match_domain\_$LONCAPA::match_courseid)/) { + $lastaccess{$1} = $value; + } else { + my $items = &Apache::lonnet::thaw_unescape($value); + if (ref($items) eq 'HASH') { + unless ($lastaccess{$unesc_key}) { + $lastaccess{$unesc_key} = ''; + } + } else { + my @courseitems = split(':',$value); + $lastaccess{$unesc_key} = pop(@courseitems); + } + } + } + foreach my $cid (sort(keys(%lastaccess))) { + $qresult.=&escape($cid).'='.$lastaccess{$cid}.'&'; + } + if (&untie_domain_hash($hashref)) { + if ($qresult) { + chop($qresult); + } + &Reply($client, \$qresult, $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting lastacourseaccess\n", $userinput); + } + } else { + &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting lastcourseaccess\n", $userinput); + } + return 1; +} +®ister_handler("courselastaccess",\&course_lastaccess_handler, 0, 1, 0); + +sub course_sessions_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($cdom,$cnum,$lastactivity) = split(':',$tail); + my $dbsuffix = '_'.$cdom.'_'.$cnum.'.db'; + my (%sessions,$qresult); + my $now=time; + if (opendir(DIR,$perlvar{'lonIDsDir'})) { + my $filename; + while ($filename=readdir(DIR)) { + next if ($filename=~/^\./); + next if ($filename=~/^publicuser_/); + next if ($filename=~/^[a-f0-9]+_(linked|lti_\d+)\.id$/); + if ($filename =~ /^($LONCAPA::match_username)_\d+_($LONCAPA::match_domain)_/) { + my ($uname,$udom) = ($1,$2); + next unless (-e "$perlvar{'lonDaemons'}/tmp/$uname$dbsuffix"); + my $mtime = (stat("$perlvar{'lonIDsDir'}/$filename"))[9]; + if ($lastactivity < 0) { + next if ($mtime-$now > $lastactivity); + } else { + next if ($now-$mtime > $lastactivity); + } + $sessions{$uname.':'.$udom} = $mtime; + } + } + closedir(DIR); + } + foreach my $user (keys(%sessions)) { + $qresult.=&escape($user).'='.$sessions{$user}.'&'; + } + if ($qresult) { + chop($qresult); + } + &Reply($client, \$qresult, $userinput); + return 1; +} +®ister_handler("coursesessions",\&course_sessions_handler, 0, 1, 0); + +# +# Puts an unencrypted entry in a namespace db file at the domain level +# +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# Side effects: +# reply is written to $client. +# +sub put_domain_handler { + my ($cmd,$tail,$client) = @_; + + my $userinput = "$cmd:$tail"; + my ($udom,$namespace,$what) =split(/:/,$tail,3); + chomp($what); + my @pairs=split(/\&/,$what); + my $hashref = &tie_domain_hash($udom, "$namespace", &GDBM_WRCREAT(), + "P", $what); + if ($hashref) { + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + $hashref->{$key}=$value; + } + if (&untie_domain_hash($hashref)) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting putdom\n", $userinput); + } + } else { + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting putdom\n", $userinput); + } return 1; } -®ister_handler("courseiddump", \&dump_course_id_handler, 0, 1, 0); +®ister_handler("putdom", \&put_domain_handler, 0, 1, 0); + +# Unencrypted get from the namespace database file at the domain level. +# This function retrieves a keyed item from a specific named database in the +# domain directory. +# +# Parameters: +# $cmd - Command request keyword (get). +# $tail - Tail of the command. This is a colon separated list +# consisting of the domain and the 'namespace' +# which selects the gdbm file to do the lookup in, +# & separated list of keys to lookup. Note that +# the values are returned as an & separated list too. +# $client - File descriptor open on the client. +# Returns: +# 1 - Continue processing. +# 0 - Exit. +# Side effects: +# reply is written to $client. +# + +sub get_domain_handler { + my ($cmd, $tail, $client) = @_; + + + my $userinput = "$cmd:$tail"; + + my ($udom,$namespace,$what)=split(/:/,$tail,3); + chomp($what); + my @queries=split(/\&/,$what); + my $qresult=''; + my $hashref = &tie_domain_hash($udom, "$namespace", &GDBM_READER()); + if ($hashref) { + for (my $i=0;$i<=$#queries;$i++) { + $qresult.="$hashref->{$queries[$i]}&"; + } + if (&untie_domain_hash($hashref)) { + $qresult=~s/\&$//; + &Reply($client, \$qresult, $userinput); + } else { + &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting getdom\n",$userinput); + } + } else { + &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting getdom\n",$userinput); + } + + return 1; +} +®ister_handler("getdom", \&get_domain_handler, 0, 1, 0); # # Puts an id to a domains id database. @@ -3436,7 +4739,7 @@ sub put_id_handler { my ($key,$value)=split(/=/,$pair); $hashref->{$key}=$value; } - if (untie(%$hashref)) { + if (&untie_domain_hash($hashref)) { &Reply($client, "ok\n", $userinput); } else { &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". @@ -3485,9 +4788,9 @@ sub get_id_handler { for (my $i=0;$i<=$#queries;$i++) { $qresult.="$hashref->{$queries[$i]}&"; } - if (untie(%$hashref)) { + if (&untie_domain_hash($hashref)) { $qresult=~s/\&$//; - &Reply($client, "$qresult\n", $userinput); + &Reply($client, \$qresult, $userinput); } else { &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". "while attempting idget\n",$userinput); @@ -3501,7 +4804,306 @@ sub get_id_handler { } ®ister_handler("idget", \&get_id_handler, 0, 1, 0); +# Deletes one or more ids in a domain's id database. # +# Parameters: +# $cmd - Command keyword (iddel). +# $tail - Command tail. In this case a colon +# separated list containing: +# The domain for which we are deleting the id(s). +# &-separated list of id(s) to delete. +# $client - File open on client socket. +# Returns: +# 1 - Continue processing +# 0 - Exit server. +# +# + +sub del_id_handler { + my ($cmd,$tail,$client) = @_; + + my $userinput = "$cmd:$tail"; + + my ($udom,$what)=split(/:/,$tail); + chomp($what); + my $hashref = &tie_domain_hash($udom, "ids", &GDBM_WRCREAT(), + "D", $what); + if ($hashref) { + my @keys=split(/\&/,$what); + foreach my $key (@keys) { + delete($hashref->{$key}); + } + if (&untie_user_hash($hashref)) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting iddel\n", $userinput); + } + } else { + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting iddel\n", $userinput); + } + return 1; +} +®ister_handler("iddel", \&del_id_handler, 0, 1, 0); + +# +# Puts broadcast e-mail sent by Domain Coordinator in nohist_dcmail database +# +# Parameters +# $cmd - Command keyword that caused us to be dispatched. +# $tail - Tail of the command. Consists of a colon separated: +# domain - the domain whose dcmail we are recording +# email Consists of key=value pair +# where key is unique msgid +# and value is message (in XML) +# $client - Socket open on the client. +# +# Returns: +# 1 - indicating processing should continue. +# Side effects +# reply is written to $client. +# +sub put_dcmail_handler { + my ($cmd,$tail,$client) = @_; + my $userinput = "$cmd:$tail"; + + + my ($udom,$what)=split(/:/,$tail); + chomp($what); + my $hashref = &tie_domain_hash($udom, "nohist_dcmail", &GDBM_WRCREAT()); + if ($hashref) { + my ($key,$value)=split(/=/,$what); + $hashref->{$key}=$value; + } + if (&untie_domain_hash($hashref)) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting dcmailput\n", $userinput); + } + return 1; +} +®ister_handler("dcmailput", \&put_dcmail_handler, 0, 1, 0); + +# +# Retrieves broadcast e-mail from nohist_dcmail database +# Returns to client an & separated list of key=value pairs, +# where key is msgid and value is message information. +# +# Parameters +# $cmd - Command keyword that caused us to be dispatched. +# $tail - Tail of the command. Consists of a colon separated: +# domain - the domain whose dcmail table we dump +# startfilter - beginning of time window +# endfilter - end of time window +# sendersfilter - & separated list of username:domain +# for senders to search for. +# $client - Socket open on the client. +# +# Returns: +# 1 - indicating processing should continue. +# Side effects +# reply (& separated list of msgid=messageinfo pairs) is +# written to $client. +# +sub dump_dcmail_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + my ($udom,$startfilter,$endfilter,$sendersfilter) = split(/:/,$tail); + chomp($sendersfilter); + my @senders = (); + if (defined($startfilter)) { + $startfilter=&unescape($startfilter); + } else { + $startfilter='.'; + } + if (defined($endfilter)) { + $endfilter=&unescape($endfilter); + } else { + $endfilter='.'; + } + if (defined($sendersfilter)) { + $sendersfilter=&unescape($sendersfilter); + @senders = map { &unescape($_) } split(/\&/,$sendersfilter); + } + + my $qresult=''; + my $hashref = &tie_domain_hash($udom, "nohist_dcmail", &GDBM_WRCREAT()); + if ($hashref) { + while (my ($key,$value) = each(%$hashref)) { + my $match = 1; + my ($timestamp,$subj,$uname,$udom) = + split(/:/,&unescape(&unescape($key)),5); # yes, twice really + $subj = &unescape($subj); + unless ($startfilter eq '.' || !defined($startfilter)) { + if ($timestamp < $startfilter) { + $match = 0; + } + } + unless ($endfilter eq '.' || !defined($endfilter)) { + if ($timestamp > $endfilter) { + $match = 0; + } + } + unless (@senders < 1) { + unless (grep/^$uname:$udom$/,@senders) { + $match = 0; + } + } + if ($match == 1) { + $qresult.=$key.'='.$value.'&'; + } + } + if (&untie_domain_hash($hashref)) { + chop($qresult); + &Reply($client, \$qresult, $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting dcmaildump\n", $userinput); + } + } else { + &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting dcmaildump\n", $userinput); + } + return 1; +} + +®ister_handler("dcmaildump", \&dump_dcmail_handler, 0, 1, 0); + +# +# Puts domain roles in nohist_domainroles database +# +# Parameters +# $cmd - Command keyword that caused us to be dispatched. +# $tail - Tail of the command. Consists of a colon separated: +# domain - the domain whose roles we are recording +# role - Consists of key=value pair +# where key is unique role +# and value is start/end date information +# $client - Socket open on the client. +# +# Returns: +# 1 - indicating processing should continue. +# Side effects +# reply is written to $client. +# + +sub put_domainroles_handler { + my ($cmd,$tail,$client) = @_; + + my $userinput = "$cmd:$tail"; + my ($udom,$what)=split(/:/,$tail); + chomp($what); + my @pairs=split(/\&/,$what); + my $hashref = &tie_domain_hash($udom, "nohist_domainroles", &GDBM_WRCREAT()); + if ($hashref) { + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + $hashref->{$key}=$value; + } + if (&untie_domain_hash($hashref)) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting domroleput\n", $userinput); + } + } else { + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting domroleput\n", $userinput); + } + + return 1; +} + +®ister_handler("domroleput", \&put_domainroles_handler, 0, 1, 0); + +# +# Retrieves domain roles from nohist_domainroles database +# Returns to client an & separated list of key=value pairs, +# where key is role and value is start and end date information. +# +# Parameters +# $cmd - Command keyword that caused us to be dispatched. +# $tail - Tail of the command. Consists of a colon separated: +# domain - the domain whose domain roles table we dump +# $client - Socket open on the client. +# +# Returns: +# 1 - indicating processing should continue. +# Side effects +# reply (& separated list of role=start/end info pairs) is +# written to $client. +# +sub dump_domainroles_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + my ($udom,$startfilter,$endfilter,$rolesfilter) = split(/:/,$tail); + chomp($rolesfilter); + my @roles = (); + if (defined($startfilter)) { + $startfilter=&unescape($startfilter); + } else { + $startfilter='.'; + } + if (defined($endfilter)) { + $endfilter=&unescape($endfilter); + } else { + $endfilter='.'; + } + if (defined($rolesfilter)) { + $rolesfilter=&unescape($rolesfilter); + @roles = split(/\&/,$rolesfilter); + } + + my $hashref = &tie_domain_hash($udom, "nohist_domainroles", &GDBM_WRCREAT()); + if ($hashref) { + my $qresult = ''; + while (my ($key,$value) = each(%$hashref)) { + my $match = 1; + my ($end,$start) = split(/:/,&unescape($value)); + my ($trole,$uname,$udom,$runame,$rudom,$rsec) = split(/:/,&unescape($key)); + unless (@roles < 1) { + unless (grep/^\Q$trole\E$/,@roles) { + $match = 0; + next; + } + } + unless ($startfilter eq '.' || !defined($startfilter)) { + if ((defined($start)) && ($start >= $startfilter)) { + $match = 0; + next; + } + } + unless ($endfilter eq '.' || !defined($endfilter)) { + if ((defined($end)) && (($end > 0) && ($end <= $endfilter))) { + $match = 0; + next; + } + } + if ($match == 1) { + $qresult.=$key.'='.$value.'&'; + } + } + if (&untie_domain_hash($hashref)) { + chop($qresult); + &Reply($client, \$qresult, $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting domrolesdump\n", $userinput); + } + } else { + &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting domrolesdump\n", $userinput); + } + return 1; +} + +®ister_handler("domrolesdump", \&dump_domainroles_handler, 0, 1, 0); + + # Process the tmpput command I'm not sure what this does.. Seems to # create a file in the lonDaemons/tmp directory of the form $id.tmp # where Id is the client's ip concatenated with a sequence number. @@ -3523,17 +5125,25 @@ sub tmp_put_handler { my $userinput = "$cmd:$what"; # Reconstruct for logging. - - my $store; + my ($record,$context) = split(/:/,$what); + if ($context ne '') { + chomp($context); + $context = &unescape($context); + } + my ($id,$store); $tmpsnum++; - my $id=$$.'_'.$clientip.'_'.$tmpsnum; + if (($context eq 'resetpw') || ($context eq 'createaccount')) { + $id = &md5_hex(&md5_hex(time.{}.rand().$$)); + } else { + $id = $$.'_'.$clientip.'_'.$tmpsnum; + } $id=~s/\W/\_/g; - $what=~s/\n//g; + $record=~s/\n//g; my $execdir=$perlvar{'lonDaemons'}; if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) { - print $store $what; + print $store $record; close $store; - &Reply($client, "$id\n", $userinput); + &Reply($client, \$id, $userinput); } else { &Failure( $client, "error: ".($!+0)."IO::File->new Failed ". "while attempting tmpput\n", $userinput); @@ -3567,7 +5177,7 @@ sub tmp_get_handler { my $execdir=$perlvar{'lonDaemons'}; if ($store=IO::File->new("$execdir/tmp/$id.tmp")) { my $reply=<$store>; - &Reply( $client, "$reply\n", $userinput); + &Reply( $client, \$reply, $userinput); close $store; } else { &Failure( $client, "error: ".($!+0)."IO::File->new Failed ". @@ -3613,6 +5223,58 @@ sub tmp_del_handler { ®ister_handler("tmpdel", \&tmp_del_handler, 0, 1, 0); # +# Process the delbalcookie command. This command deletes a balancer +# cookie in the lonBalancedir directory created by switchserver +# +# Parameters: +# $cmd - Command that got us here. +# $cookie - Cookie to be deleted. +# $client - socket open on the client process. +# +# Returns: +# 1 - Indicating processing should continue. +# Side Effects: +# A cookie file is deleted from the lonBalancedir directory +# A reply is sent to the client. +sub del_balcookie_handler { + my ($cmd, $cookie, $client) = @_; + + my $userinput= "$cmd:$cookie"; + + chomp($cookie); + my $deleted = ''; + if ($cookie =~ /^$LONCAPA::match_domain\_$LONCAPA::match_username\_[a-f0-9]{32}$/) { + my $execdir=$perlvar{'lonBalanceDir'}; + if (-e "$execdir/$cookie.id") { + if (open(my $fh,'<',"$execdir/$cookie.id")) { + my $dodelete; + while (my $line = <$fh>) { + chomp($line); + if ($line eq $clientname) { + $dodelete = 1; + last; + } + } + close($fh); + if ($dodelete) { + if (unlink("$execdir/$cookie.id")) { + $deleted = 1; + } + } + } + } + } + if ($deleted) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure( $client, "error: ".($!+0)."Unlinking cookie file Failed ". + "while attempting delbalcookie\n", $userinput); + } + return 1; +} +®ister_handler("delbalcookie", \&del_balcookie_handler, 0, 1, 0); + +# # Processes the setannounce command. This command # creates a file named announce.txt in the top directory of # the documentn root and sets its contents. The announce.txt file is @@ -3748,14 +5410,53 @@ sub enrollment_enabled_handler { my $userinput = $cmd.":".$tail; # For logging purposes. - my $cdom = split(/:/, $tail); # Domain we're asking about. + my ($cdom) = split(/:/, $tail, 2); # Domain we're asking about. + my $outcome = &localenroll::run($cdom); - &Reply($client, "$outcome\n", $userinput); + &Reply($client, \$outcome, $userinput); return 1; } ®ister_handler("autorun", \&enrollment_enabled_handler, 0, 1, 0); +# +# Validate an institutional code used for a LON-CAPA course. +# +# Formal Parameters: +# $cmd - The command request that got us dispatched. +# $tail - The tail of the command. In this case, +# this is a colon separated set of words that will be split +# into: +# $dom - The domain for which the check of +# institutional course code will occur. +# +# $instcode - The institutional code for the course +# being requested, or validated for rights +# to request. +# +# $owner - The course requestor (who will be the +# course owner, in the form username:domain +# +# $client - Socket open on the client. +# Returns: +# 1 - Indicating processing should continue. +# +sub validate_instcode_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($dom,$instcode,$owner) = split(/:/, $tail); + $instcode = &unescape($instcode); + $owner = &unescape($owner); + my ($outcome,$description,$credits) = + &localenroll::validate_instcode($dom,$instcode,$owner); + my $result = &escape($outcome).'&'.&escape($description).'&'. + &escape($credits); + &Reply($client, \$result, $userinput); + + return 1; +} +®ister_handler("autovalidateinstcode", \&validate_instcode_handler, 0, 1, 0); + # Get the official sections for which auto-enrollment is possible. # Since the admin people won't know about 'unofficial sections' # we cannot auto-enroll on them. @@ -3777,7 +5478,7 @@ sub get_sections_handler { my @secs = &localenroll::get_sections($coursecode,$cdom); my $seclist = &escape(join(':',@secs)); - &Reply($client, "$seclist\n", $userinput); + &Reply($client, \$seclist, $userinput); return 1; @@ -3802,10 +5503,12 @@ sub get_sections_handler { sub validate_course_owner_handler { my ($cmd, $tail, $client) = @_; my $userinput = "$cmd:$tail"; - my ($inst_course_id, $owner, $cdom) = split(/:/, $tail); - - my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom); - &Reply($client, "$outcome\n", $userinput); + my ($inst_course_id, $owner, $cdom, $coowners) = split(/:/, $tail); + + $owner = &unescape($owner); + $coowners = &unescape($coowners); + my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom,$coowners); + &Reply($client, \$outcome, $userinput); @@ -3836,7 +5539,7 @@ sub validate_course_section_handler { my ($inst_course_id, $cdom) = split(/:/, $tail); my $outcome=&localenroll::validate_courseID($inst_course_id,$cdom); - &Reply($client, "$outcome\n", $userinput); + &Reply($client, \$outcome, $userinput); return 1; @@ -3844,16 +5547,98 @@ sub validate_course_section_handler { ®ister_handler("autovalidatecourse", \&validate_course_section_handler, 0, 1, 0); # -# Create a password for a new auto-enrollment user. -# I think/guess, this password allows access to the institutions -# AIS class list server/services. Stuart can correct this comment -# when he finds out how wrong I am. +# Validate course owner's access to enrollment data for specific class section. +# +# +# Formal Parameters: +# $cmd - The command request that got us dispatched. +# $tail - The tail of the command. In this case this is a colon separated +# set of values that will be split into: +# $inst_class - Institutional code for the specific class section +# $ownerlist - An escaped comma-separated list of username:domain +# of the course owner, and co-owner(s). +# $cdom - The domain of the course from the institution's +# point of view. +# $client - The socket open on the client. +# Returns: +# 1 - continue processing. +# + +sub validate_class_access_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($inst_class,$ownerlist,$cdom) = split(/:/, $tail); + my $owners = &unescape($ownerlist); + my $outcome; + eval { + local($SIG{__DIE__})='DEFAULT'; + $outcome=&localenroll::check_section($inst_class,$owners,$cdom); + }; + &Reply($client,\$outcome, $userinput); + + return 1; +} +®ister_handler("autovalidateclass_sec", \&validate_class_access_handler, 0, 1, 0); + +# +# Validate course owner or co-owners(s) access to enrollment data for all sections +# and crosslistings for a particular course. +# +# +# Formal Parameters: +# $cmd - The command request that got us dispatched. +# $tail - The tail of the command. In this case this is a colon separated +# set of values that will be split into: +# $ownerlist - An escaped comma-separated list of username:domain +# of the course owner, and co-owner(s). +# $cdom - The domain of the course from the institution's +# point of view. +# $classes - Frozen hash of institutional course sections and +# crosslistings. +# $client - The socket open on the client. +# Returns: +# 1 - continue processing. +# + +sub validate_classes_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($ownerlist,$cdom,$classes) = split(/:/, $tail); + my $classesref = &Apache::lonnet::thaw_unescape($classes); + my $owners = &unescape($ownerlist); + my $result; + eval { + local($SIG{__DIE__})='DEFAULT'; + my %validations; + my $response = &localenroll::check_instclasses($owners,$cdom,$classesref, + \%validations); + if ($response eq 'ok') { + foreach my $key (keys(%validations)) { + $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($validations{$key}).'&'; + } + $result =~ s/\&$//; + } else { + $result = 'error'; + } + }; + if (!$@) { + &Reply($client, \$result, $userinput); + } else { + &Failure($client,"unknown_cmd\n",$userinput); + } + return 1; +} +®ister_handler("autovalidateinstclasses", \&validate_classes_handler, 0, 1, 0); + +# +# Create a password for a new LON-CAPA user added by auto-enrollment. +# Only used for case where authentication method for new user is localauth # # Formal Parameters: # $cmd - The command request that got us dispatched. # $tail - The tail of the command. In this case this is a colon separated # set of words that will be split into: -# $authparam - An authentication parameter (username??). +# $authparam - An authentication parameter (localauth parameter). # $cdom - The domain of the course from the institution's # point of view. # $client - The socket open on the client. @@ -3880,13 +5665,59 @@ sub create_auto_enroll_password_handler ®ister_handler("autocreatepassword", \&create_auto_enroll_password_handler, 0, 1, 0); +sub auto_export_grades_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($cdom,$cnum,$info,$data) = split(/:/,$tail); + my $inforef = &Apache::lonnet::thaw_unescape($info); + my $dataref = &Apache::lonnet::thaw_unescape($data); + my ($outcome,$result);; + eval { + local($SIG{__DIE__})='DEFAULT'; + my %rtnhash; + $outcome=&localenroll::export_grades($cdom,$cnum,$inforef,$dataref,\%rtnhash); + if ($outcome eq 'ok') { + foreach my $key (keys(%rtnhash)) { + $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rtnhash{$key}).'&'; + } + $result =~ s/\&$//; + } + }; + if (!$@) { + if ($outcome eq 'ok') { + if ($cipher) { + my $cmdlength=length($result); + $result.=" "; + my $encresult=''; + for (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) { + $encresult.= unpack("H16", + $cipher->encrypt(substr($result, + $encidx, + 8))); + } + &Reply( $client, "enc:$cmdlength:$encresult\n", $userinput); + } else { + &Failure( $client, "error:no_key\n", $userinput); + } + } else { + &Reply($client, "$outcome\n", $userinput); + } + } else { + &Failure($client,"export_error\n",$userinput); + } + return 1; +} +®ister_handler("autoexportgrades", \&auto_export_grades_handler, + 1, 1, 0); + + # Retrieve and remove temporary files created by/during autoenrollment. # # Formal Parameters: # $cmd - The command that got us dispatched. # $tail - The tail of the command. In our case this is a colon # separated list that will be split into: -# $filename - The name of the file to remove. +# $filename - The name of the file to retrieve. # The filename is given as a path relative to # the LonCAPA temp file directory. # $client - Socket open on the client. @@ -3900,7 +5731,11 @@ sub retrieve_auto_file_handler { my ($filename) = split(/:/, $tail); my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename; - if ( (-e $source) && ($filename ne '') ) { + if ($filename =~m{/\.\./}) { + &Failure($client, "refused\n", $userinput); + } elsif ($filename !~ /^$LONCAPA::match_domain\_$LONCAPA::match_courseid\_.+_classlist\.xml$/) { + &Failure($client, "refused\n", $userinput); + } elsif ( (-e $source) && ($filename ne '') ) { my $reply = ''; if (open(my $fh,$source)) { while (<$fh>) { @@ -3927,6 +5762,109 @@ sub retrieve_auto_file_handler { } ®ister_handler("autoretrieve", \&retrieve_auto_file_handler, 0,1,0); +sub crsreq_checks_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my $dom = $tail; + my $result; + my @reqtypes = ('official','unofficial','community','textbook'); + eval { + local($SIG{__DIE__})='DEFAULT'; + my %validations; + my $response = &localenroll::crsreq_checks($dom,\@reqtypes, + \%validations); + if ($response eq 'ok') { + foreach my $key (keys(%validations)) { + $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($validations{$key}).'&'; + } + $result =~ s/\&$//; + } else { + $result = 'error'; + } + }; + if (!$@) { + &Reply($client, \$result, $userinput); + } else { + &Failure($client,"unknown_cmd\n",$userinput); + } + return 1; +} +®ister_handler("autocrsreqchecks", \&crsreq_checks_handler, 0, 1, 0); + +sub validate_crsreq_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist,$customdata) = split(/:/, $tail); + $instcode = &unescape($instcode); + $owner = &unescape($owner); + $crstype = &unescape($crstype); + $inststatuslist = &unescape($inststatuslist); + $instcode = &unescape($instcode); + $instseclist = &unescape($instseclist); + my $custominfo = &Apache::lonnet::thaw_unescape($customdata); + my $outcome; + eval { + local($SIG{__DIE__})='DEFAULT'; + $outcome = &localenroll::validate_crsreq($dom,$owner,$crstype, + $inststatuslist,$instcode, + $instseclist,$custominfo); + }; + if (!$@) { + &Reply($client, \$outcome, $userinput); + } else { + &Failure($client,"unknown_cmd\n",$userinput); + } + return 1; +} +®ister_handler("autocrsreqvalidation", \&validate_crsreq_handler, 0, 1, 0); + +sub crsreq_update_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($cdom,$cnum,$crstype,$action,$ownername,$ownerdomain,$fullname,$title,$code, + $accessstart,$accessend,$infohashref) = + split(/:/, $tail); + $crstype = &unescape($crstype); + $action = &unescape($action); + $ownername = &unescape($ownername); + $ownerdomain = &unescape($ownerdomain); + $fullname = &unescape($fullname); + $title = &unescape($title); + $code = &unescape($code); + $accessstart = &unescape($accessstart); + $accessend = &unescape($accessend); + my $incoming = &Apache::lonnet::thaw_unescape($infohashref); + my ($result,$outcome); + eval { + local($SIG{__DIE__})='DEFAULT'; + my %rtnhash; + $outcome = &localenroll::crsreq_updates($cdom,$cnum,$crstype,$action, + $ownername,$ownerdomain,$fullname, + $title,$code,$accessstart,$accessend, + $incoming,\%rtnhash); + if ($outcome eq 'ok') { + my @posskeys = qw(createdweb createdmsg createdcustomized createdactions queuedweb queuedmsg formitems reviewweb validationjs onload javascript); + foreach my $key (keys(%rtnhash)) { + if (grep(/^\Q$key\E/,@posskeys)) { + $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rtnhash{$key}).'&'; + } + } + $result =~ s/\&$//; + } + }; + if (!$@) { + if ($outcome eq 'ok') { + &Reply($client, \$result, $userinput); + } else { + &Reply($client, "format_error\n", $userinput); + } + } else { + &Failure($client,"unknown_cmd\n",$userinput); + } + return 1; +} +®ister_handler("autocrsrequpdate", \&crsreq_update_handler, 0, 1, 0); + # # Read and retrieve institutional code format (for support form). # Formal Parameters: @@ -3960,10 +5898,10 @@ sub get_institutional_code_format_handle \%cat_titles, \%cat_order); if ($formatreply eq 'ok') { - my $codes_str = &hash2str(%codes); - my $codetitles_str = &array2str(@codetitles); - my $cat_titles_str = &hash2str(%cat_titles); - my $cat_order_str = &hash2str(%cat_order); + my $codes_str = &Apache::lonnet::hash2str(%codes); + my $codetitles_str = &Apache::lonnet::array2str(@codetitles); + my $cat_titles_str = &Apache::lonnet::hash2str(%cat_titles); + my $cat_order_str = &Apache::lonnet::hash2str(%cat_order); &Reply($client, $codes_str.':'.$codetitles_str.':'.$cat_titles_str.':' .$cat_order_str."\n", @@ -3980,6 +5918,337 @@ sub get_institutional_code_format_handle ®ister_handler("autoinstcodeformat", \&get_institutional_code_format_handler,0,1,0); +sub get_institutional_defaults_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + + my $dom = $tail; + my %defaults_hash; + my @code_order; + my $outcome; + eval { + local($SIG{__DIE__})='DEFAULT'; + $outcome = &localenroll::instcode_defaults($dom,\%defaults_hash, + \@code_order); + }; + if (!$@) { + if ($outcome eq 'ok') { + my $result=''; + while (my ($key,$value) = each(%defaults_hash)) { + $result.=&escape($key).'='.&escape($value).'&'; + } + $result .= 'code_order='.&escape(join('&',@code_order)); + &Reply($client,\$result,$userinput); + } else { + &Reply($client,"error\n", $userinput); + } + } else { + &Failure($client,"unknown_cmd\n",$userinput); + } +} +®ister_handler("autoinstcodedefaults", + \&get_institutional_defaults_handler,0,1,0); + +sub get_possible_instcodes_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + + my $reply; + my $cdom = $tail; + my (@codetitles,%cat_titles,%cat_order,@code_order); + my $formatreply = &localenroll::possible_instcodes($cdom, + \@codetitles, + \%cat_titles, + \%cat_order, + \@code_order); + if ($formatreply eq 'ok') { + my $result = join('&',map {&escape($_);} (@codetitles)).':'; + $result .= join('&',map {&escape($_);} (@code_order)).':'; + foreach my $key (keys(%cat_titles)) { + $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($cat_titles{$key}).'&'; + } + $result =~ s/\&$//; + $result .= ':'; + foreach my $key (keys(%cat_order)) { + $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($cat_order{$key}).'&'; + } + $result =~ s/\&$//; + &Reply($client,\$result,$userinput); + } else { + &Reply($client, "format_error\n", $userinput); + } + return 1; +} +®ister_handler("autopossibleinstcodes", + \&get_possible_instcodes_handler,0,1,0); + +sub get_institutional_user_rules { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my $dom = &unescape($tail); + my (%rules_hash,@rules_order); + my $outcome; + eval { + local($SIG{__DIE__})='DEFAULT'; + $outcome = &localenroll::username_rules($dom,\%rules_hash,\@rules_order); + }; + if (!$@) { + if ($outcome eq 'ok') { + my $result; + foreach my $key (keys(%rules_hash)) { + $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rules_hash{$key}).'&'; + } + $result =~ s/\&$//; + $result .= ':'; + if (@rules_order > 0) { + foreach my $item (@rules_order) { + $result .= &escape($item).'&'; + } + } + $result =~ s/\&$//; + &Reply($client,\$result,$userinput); + } else { + &Reply($client,"error\n", $userinput); + } + } else { + &Failure($client,"unknown_cmd\n",$userinput); + } +} +®ister_handler("instuserrules",\&get_institutional_user_rules,0,1,0); + +sub get_institutional_id_rules { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my $dom = &unescape($tail); + my (%rules_hash,@rules_order); + my $outcome; + eval { + local($SIG{__DIE__})='DEFAULT'; + $outcome = &localenroll::id_rules($dom,\%rules_hash,\@rules_order); + }; + if (!$@) { + if ($outcome eq 'ok') { + my $result; + foreach my $key (keys(%rules_hash)) { + $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rules_hash{$key}).'&'; + } + $result =~ s/\&$//; + $result .= ':'; + if (@rules_order > 0) { + foreach my $item (@rules_order) { + $result .= &escape($item).'&'; + } + } + $result =~ s/\&$//; + &Reply($client,\$result,$userinput); + } else { + &Reply($client,"error\n", $userinput); + } + } else { + &Failure($client,"unknown_cmd\n",$userinput); + } +} +®ister_handler("instidrules",\&get_institutional_id_rules,0,1,0); + +sub get_institutional_selfcreate_rules { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my $dom = &unescape($tail); + my (%rules_hash,@rules_order); + my $outcome; + eval { + local($SIG{__DIE__})='DEFAULT'; + $outcome = &localenroll::selfcreate_rules($dom,\%rules_hash,\@rules_order); + }; + if (!$@) { + if ($outcome eq 'ok') { + my $result; + foreach my $key (keys(%rules_hash)) { + $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rules_hash{$key}).'&'; + } + $result =~ s/\&$//; + $result .= ':'; + if (@rules_order > 0) { + foreach my $item (@rules_order) { + $result .= &escape($item).'&'; + } + } + $result =~ s/\&$//; + &Reply($client,\$result,$userinput); + } else { + &Reply($client,"error\n", $userinput); + } + } else { + &Failure($client,"unknown_cmd\n",$userinput); + } +} +®ister_handler("instemailrules",\&get_institutional_selfcreate_rules,0,1,0); + + +sub institutional_username_check { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my %rulecheck; + my $outcome; + my ($udom,$uname,@rules) = split(/:/,$tail); + $udom = &unescape($udom); + $uname = &unescape($uname); + @rules = map {&unescape($_);} (@rules); + eval { + local($SIG{__DIE__})='DEFAULT'; + $outcome = &localenroll::username_check($udom,$uname,\@rules,\%rulecheck); + }; + if (!$@) { + if ($outcome eq 'ok') { + my $result=''; + foreach my $key (keys(%rulecheck)) { + $result.=&escape($key).'='.&Apache::lonnet::freeze_escape($rulecheck{$key}).'&'; + } + &Reply($client,\$result,$userinput); + } else { + &Reply($client,"error\n", $userinput); + } + } else { + &Failure($client,"unknown_cmd\n",$userinput); + } +} +®ister_handler("instrulecheck",\&institutional_username_check,0,1,0); + +sub institutional_id_check { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my %rulecheck; + my $outcome; + my ($udom,$id,@rules) = split(/:/,$tail); + $udom = &unescape($udom); + $id = &unescape($id); + @rules = map {&unescape($_);} (@rules); + eval { + local($SIG{__DIE__})='DEFAULT'; + $outcome = &localenroll::id_check($udom,$id,\@rules,\%rulecheck); + }; + if (!$@) { + if ($outcome eq 'ok') { + my $result=''; + foreach my $key (keys(%rulecheck)) { + $result.=&escape($key).'='.&Apache::lonnet::freeze_escape($rulecheck{$key}).'&'; + } + &Reply($client,\$result,$userinput); + } else { + &Reply($client,"error\n", $userinput); + } + } else { + &Failure($client,"unknown_cmd\n",$userinput); + } +} +®ister_handler("instidrulecheck",\&institutional_id_check,0,1,0); + +sub institutional_selfcreate_check { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my %rulecheck; + my $outcome; + my ($udom,$email,@rules) = split(/:/,$tail); + $udom = &unescape($udom); + $email = &unescape($email); + @rules = map {&unescape($_);} (@rules); + eval { + local($SIG{__DIE__})='DEFAULT'; + $outcome = &localenroll::selfcreate_check($udom,$email,\@rules,\%rulecheck); + }; + if (!$@) { + if ($outcome eq 'ok') { + my $result=''; + foreach my $key (keys(%rulecheck)) { + $result.=&escape($key).'='.&Apache::lonnet::freeze_escape($rulecheck{$key}).'&'; + } + &Reply($client,\$result,$userinput); + } else { + &Reply($client,"error\n", $userinput); + } + } else { + &Failure($client,"unknown_cmd\n",$userinput); + } +} +®ister_handler("instselfcreatecheck",\&institutional_selfcreate_check,0,1,0); + +# Get domain specific conditions for import of student photographs to a course +# +# Retrieves information from photo_permission subroutine in localenroll. +# Returns outcome (ok) if no processing errors, and whether course owner is +# required to accept conditions of use (yes/no). +# +# +sub photo_permission_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my $cdom = $tail; + my ($perm_reqd,$conditions); + my $outcome; + eval { + local($SIG{__DIE__})='DEFAULT'; + $outcome = &localenroll::photo_permission($cdom,\$perm_reqd, + \$conditions); + }; + if (!$@) { + &Reply($client, &escape($outcome.':'.$perm_reqd.':'. $conditions)."\n", + $userinput); + } else { + &Failure($client,"unknown_cmd\n",$userinput); + } + return 1; +} +®ister_handler("autophotopermission",\&photo_permission_handler,0,1,0); + +# +# Checks if student photo is available for a user in the domain, in the user's +# directory (in /userfiles/internal/studentphoto.jpg). +# Uses localstudentphoto:fetch() to ensure there is an up to date copy of +# the student's photo. + +sub photo_check_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($udom,$uname,$pid) = split(/:/,$tail); + $udom = &unescape($udom); + $uname = &unescape($uname); + $pid = &unescape($pid); + my $path=&propath($udom,$uname).'/userfiles/internal/'; + if (!-e $path) { + &mkpath($path); + } + my $response; + my $result = &localstudentphoto::fetch($udom,$uname,$pid,\$response); + $result .= ':'.$response; + &Reply($client, &escape($result)."\n",$userinput); + return 1; +} +®ister_handler("autophotocheck",\&photo_check_handler,0,1,0); + +# +# Retrieve information from localenroll about whether to provide a button +# for users who have enbled import of student photos to initiate an +# update of photo files for registered students. Also include +# comment to display alongside button. + +sub photo_choice_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my $cdom = &unescape($tail); + my ($update,$comment); + eval { + local($SIG{__DIE__})='DEFAULT'; + ($update,$comment) = &localenroll::manager_photo_update($cdom); + }; + if (!$@) { + &Reply($client,&escape($update).':'.&escape($comment)."\n",$userinput); + } else { + &Failure($client,"unknown_cmd\n",$userinput); + } + return 1; +} +®ister_handler("autophotochoice",\&photo_choice_handler,0,1,0); + # # Gets a student's photo to exist (in the correct image type) in the user's # directory. @@ -3992,24 +6261,36 @@ sub get_institutional_code_format_handle # $client - The socket open on the client. # Returns: # 1 - continue processing. + sub student_photo_handler { my ($cmd, $tail, $client) = @_; - my ($domain,$uname,$type) = split(/:/, $tail); + my ($domain,$uname,$ext,$type) = split(/:/, $tail); - my $path=&propath($domain,$uname). - '/userfiles/internal/studentphoto.'.$type; - if (-e $path) { + my $path=&propath($domain,$uname). '/userfiles/internal/'; + my $filename = 'studentphoto.'.$ext; + if ($type eq 'thumbnail') { + $filename = 'studentphoto_tn.'.$ext; + } + if (-e $path.$filename) { &Reply($client,"ok\n","$cmd:$tail"); return 1; } &mkpath($path); - my $file=&localstudentphoto::fetch($domain,$uname); + my $file; + if ($type eq 'thumbnail') { + eval { + local($SIG{__DIE__})='DEFAULT'; + $file=&localstudentphoto::fetch_thumbnail($domain,$uname); + }; + } else { + $file=&localstudentphoto::fetch($domain,$uname); + } if (!$file) { &Failure($client,"unavailable\n","$cmd:$tail"); return 1; } - if (!-e $path) { &convert_photo($file,$path); } - if (-e $path) { + if (!-e $path.$filename) { &convert_photo($file,$path.$filename); } + if (-e $path.$filename) { &Reply($client,"ok\n","$cmd:$tail"); return 1; } @@ -4018,6 +6299,35 @@ sub student_photo_handler { } ®ister_handler("studentphoto", \&student_photo_handler, 0, 1, 0); +sub inst_usertypes_handler { + my ($cmd, $domain, $client) = @_; + my $res; + my $userinput = $cmd.":".$domain; # For logging purposes. + my (%typeshash,@order,$result); + eval { + local($SIG{__DIE__})='DEFAULT'; + $result=&localenroll::inst_usertypes($domain,\%typeshash,\@order); + }; + if ($result eq 'ok') { + if (keys(%typeshash) > 0) { + foreach my $key (keys(%typeshash)) { + $res.=&escape($key).'='.&escape($typeshash{$key}).'&'; + } + } + $res=~s/\&$//; + $res .= ':'; + if (@order > 0) { + foreach my $item (@order) { + $res .= &escape($item).'&'; + } + } + $res=~s/\&$//; + } + &Reply($client, \$res, $userinput); + return 1; +} +®ister_handler("inst_usertypes", \&inst_usertypes_handler, 0, 1, 0); + # mkpath makes all directories for a file, expects an absolute path with a # file or a trailing / if just a dir is passed # returns 1 on success 0 on failure @@ -4070,6 +6380,22 @@ sub process_request { # fix all the userinput -> user_input. my $wasenc = 0; # True if request was encrypted. # ------------------------------------------------------------ See if encrypted + # for command + # sethost: + # : + # we just send it to the processor + # for + # sethost::: + # we do the implict set host and then do the command + if ($userinput =~ /^sethost:/) { + (my $cmd,my $newid,$userinput) = split(':',$userinput,3); + if (defined($userinput)) { + &sethost("$cmd:$newid"); + } else { + $userinput = "$cmd:$newid"; + } + } + if ($userinput =~ /^enc/) { $userinput = decipher($userinput); $wasenc=1; @@ -4246,18 +6572,6 @@ sub lcpasswdstrerror { } } -# -# Convert an error return code from lcuseradd to a string value: -# -sub lcuseraddstrerror { - my $ErrorCode = shift; - if(($ErrorCode < 0) || ($ErrorCode > $lastadderror)) { - return "lcuseradd - Unrecognized error code: ".$ErrorCode; - } else { - return $adderrors[$ErrorCode]; - } -} - # grabs exception and records it to log before exiting sub catchexception { my ($error)=@_; @@ -4265,7 +6579,7 @@ sub catchexception { $SIG{__DIE__}='DEFAULT'; &status("Catching exception"); &logthis("CRITICAL: " - ."ABNORMAL EXIT. Child $$ for server $thisserver died through " + ."ABNORMAL EXIT. Child $$ for server ".$perlvar{'lonHostID'}." died through " ."a crash with this error msg->[$error]"); &logthis('Famous last words: '.$status.' - '.$lastlog); if ($client) { print $client "error: $error\n"; } @@ -4294,8 +6608,8 @@ my $wwwid=getpwnam('www'); if ($wwwid!=$<) { my $emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}"; my $subj="LON: $currenthostid User ID mismatch"; - system("echo 'User ID mismatch. lond must be run as user www.' |\ - mailto $emailto -s '$subj' > /dev/null"); + system("echo 'User ID mismatch. lond must be run as user www.' |". + " mail -s '$subj' $emailto > /dev/null"); exit 1; } @@ -4318,7 +6632,7 @@ if (-e $pidfile) { $server = IO::Socket::INET->new(LocalPort => $perlvar{'londPort'}, Type => SOCK_STREAM, Proto => 'tcp', - Reuse => 1, + ReuseAddr => 1, Listen => 10 ) or die "making socket: $@\n"; @@ -4376,74 +6690,18 @@ sub HUPSMAN { # sig } # -# Kill off hashes that describe the host table prior to re-reading it. -# Hashes affected are: -# %hostid, %hostdom %hostip %hostdns. -# -sub KillHostHashes { - foreach my $key (keys %hostid) { - delete $hostid{$key}; - } - foreach my $key (keys %hostdom) { - delete $hostdom{$key}; - } - foreach my $key (keys %hostip) { - delete $hostip{$key}; - } - foreach my $key (keys %hostdns) { - delete $hostdns{$key}; - } -} -# -# Read in the host table from file and distribute it into the various hashes: -# -# - %hostid - Indexed by IP, the loncapa hostname. -# - %hostdom - Indexed by loncapa hostname, the domain. -# - %hostip - Indexed by hostid, the Ip address of the host. -sub ReadHostTable { - - open (CONFIG,"$perlvar{'lonTabDir'}/hosts.tab") || die "Can't read host file"; - my $myloncapaname = $perlvar{'lonHostID'}; - Debug("My loncapa name is : $myloncapaname"); - my %name_to_ip; - while (my $configline=) { - if ($configline !~ /^\s*\#/ && $configline !~ /^\s*$/ ) { - my ($id,$domain,$role,$name)=split(/:/,$configline); - $name=~s/\s//g; - my $ip; - if (!exists($name_to_ip{$name})) { - $ip = gethostbyname($name); - if (!$ip || length($ip) ne 4) { - &logthis("Skipping host $id name $name no IP found\n"); - next; - } - $ip=inet_ntoa($ip); - $name_to_ip{$name} = $ip; - } else { - $ip = $name_to_ip{$name}; - } - $hostid{$ip}=$id; # LonCAPA name of host by IP. - $hostdom{$id}=$domain; # LonCAPA domain name of host. - $hostip{$id}=$ip; # IP address of host. - $hostdns{$name} = $id; # LonCAPA name of host by DNS. - - if ($id eq $perlvar{'lonHostID'}) { - Debug("Found me in the host table: $name"); - $thisserver=$name; - } - } - } - close(CONFIG); -} -# # Reload the Apache daemon's state. # This is done by invoking /home/httpd/perl/apachereload # a setuid perl script that can be root for us to do this job. # sub ReloadApache { - my $execdir = $perlvar{'lonDaemons'}; - my $script = $execdir."/apachereload"; - system($script); +# --------------------------- Handle case of another apachereload process (locking) + if (&LONCAPA::try_to_lock('/tmp/lock_apachereload')) { + my $execdir = $perlvar{'lonDaemons'}; + my $script = $execdir."/apachereload"; + system($script); + unlink('/tmp/lock_apachereload'); # Remove the lock file. + } } # @@ -4466,13 +6724,12 @@ sub UpdateHosts { # either dropped or changed hosts. Note that the re-read of the table # will take care of new and changed hosts as connections come into being. + &Apache::lonnet::reset_hosts_info(); - KillHostHashes; - ReadHostTable; - - foreach my $child (keys %children) { + foreach my $child (keys(%children)) { my $childip = $children{$child}; - if(!$hostid{$childip}) { + if ($childip ne '127.0.0.1' + && !defined(&Apache::lonnet::get_hosts_from_ip($childip))) { logthis(' UpdateHosts killing child ' ." $child for ip $childip "); kill('INT', $child); @@ -4557,9 +6814,14 @@ sub Debug { # sub Reply { my ($fd, $reply, $request) = @_; - print $fd $reply; - Debug("Request was $request Reply was $reply"); - + if (ref($reply)) { + print $fd $$reply; + print $fd "\n"; + if ($DEBUG) { Debug("Request was $request Reply was $$reply"); } + } else { + print $fd $reply; + if ($DEBUG) { Debug("Request was $request Reply was $reply"); } + } $Transactions++; } @@ -4612,7 +6874,7 @@ sub logstatus { sub initnewstatus { my $docdir=$perlvar{'lonDocRoot'}; my $fh=IO::File->new(">$docdir/lon-status/londstatus.txt"); - my $now=time; + my $now=time(); my $local=localtime($now); print $fh "LOND status $local - parent $$\n\n"; opendir(DIR,"$docdir/lon-status/londchld"); @@ -4632,79 +6894,6 @@ sub status { $0='lond: '.$what.' '.$local; } -# -------------------------------------------------------- Escape Special Chars - -sub escape { - my $str=shift; - $str =~ s/(\W)/"%".unpack('H2',$1)/eg; - return $str; -} - -# ----------------------------------------------------- Un-Escape Special Chars - -sub unescape { - my $str=shift; - $str =~ s/%([a-fA-F0-9][a-fA-F0-9])/pack("C",hex($1))/eg; - return $str; -} - -# ----------------------------------------------------------- Send USR1 to lonc - -sub reconlonc { - my $peerfile=shift; - &logthis("Trying to reconnect for $peerfile"); - my $loncfile="$perlvar{'lonDaemons'}/logs/lonc.pid"; - if (my $fh=IO::File->new("$loncfile")) { - my $loncpid=<$fh>; - chomp($loncpid); - if (kill 0 => $loncpid) { - &logthis("lonc at pid $loncpid responding, sending USR1"); - kill USR1 => $loncpid; - } else { - &logthis( - "CRITICAL: " - ."lonc at pid $loncpid not responding, giving up"); - } - } else { - &logthis('CRITICAL: lonc not running, giving up'); - } -} - -# -------------------------------------------------- Non-critical communication - -sub subreply { - my ($cmd,$server)=@_; - my $peerfile="$perlvar{'lonSockDir'}/$server"; - my $sclient=IO::Socket::UNIX->new(Peer =>"$peerfile", - Type => SOCK_STREAM, - Timeout => 10) - or return "con_lost"; - print $sclient "$cmd\n"; - my $answer=<$sclient>; - chomp($answer); - if (!$answer) { $answer="con_lost"; } - return $answer; -} - -sub reply { - my ($cmd,$server)=@_; - my $answer; - if ($server ne $currenthostid) { - $answer=subreply($cmd,$server); - if ($answer eq 'con_lost') { - $answer=subreply("ping",$server); - if ($answer ne $server) { - &logthis("sub reply: answer != server answer is $answer, server is $server"); - &reconlonc("$perlvar{'lonSockDir'}/$server"); - } - $answer=subreply($cmd,$server); - } - } else { - $answer='self_reply'; - } - return $answer; -} - # -------------------------------------------------------------- Talk to lonsql sub sql_reply { @@ -4722,25 +6911,13 @@ sub sub_sql_reply { Type => SOCK_STREAM, Timeout => 10) or return "con_lost"; - print $sclient "$cmd\n"; + print $sclient "$cmd:$currentdomainid\n"; my $answer=<$sclient>; chomp($answer); if (!$answer) { $answer="con_lost"; } return $answer; } -# -------------------------------------------- Return path to profile directory - -sub propath { - my ($udom,$uname)=@_; - $udom=~s/\W//g; - $uname=~s/\W//g; - my $subdir=$uname.'__'; - $subdir =~ s/(.)(.)(.).*/$1\/$2\/$3/; - my $proname="$perlvar{'lonUsersDir'}/$udom/$subdir/$uname"; - return $proname; -} - # --------------------------------------- Is this the home server of an author? sub ishome { @@ -4785,10 +6962,17 @@ $SIG{USR1} = \&checkchildren; $SIG{USR2} = \&UpdateHosts; # Read the host hashes: +&Apache::lonnet::load_hosts_tab(); +my %iphost = &Apache::lonnet::get_iphost(1); -ReadHostTable; +$dist=`$perlvar{'lonDaemons'}/distprobe`; -my $dist=`$perlvar{'lonDaemons'}/distprobe`; +my $arch = `uname -i`; +chomp($arch); +if ($arch eq 'unknown') { + $arch = `uname -m`; + chomp($arch); +} # -------------------------------------------------------------- # Accept connections. When a connection comes in, it is validated @@ -4847,6 +7031,7 @@ sub make_new_child { or die "Can't unblock SIGINT for fork: $!\n"; $children{$pid} = $clientip; &status('Started child '.$pid); + close($client); return; } else { # Child can *not* return from this subroutine. @@ -4855,6 +7040,13 @@ sub make_new_child { #don't get intercepted $SIG{USR1}= \&logstatus; $SIG{ALRM}= \&timeout; + # + # Block sigpipe as it gets thrownon socket disconnect and we want to + # deal with that as a read faiure instead. + # + my $blockset = POSIX::SigSet->new(SIGPIPE); + sigprocmask(SIG_BLOCK, $blockset); + $lastlog='Forked '; $status='Forked'; @@ -4865,9 +7057,28 @@ sub make_new_child { # my $tmpsnum=0; # Now global #---------------------------------------------------- kerberos 5 initialization &Authen::Krb5::init_context(); - if ($dist ne 'fedora4') { - &Authen::Krb5::init_ets(); - } + + my $no_ets; + if ($dist =~ /^(?:centos|rhes|scientific|oracle)(\d+)$/) { + if ($1 >= 7) { + $no_ets = 1; + } + } elsif ($dist =~ /^suse(\d+\.\d+)$/) { + if (($1 eq '9.3') || ($1 >= 12.2)) { + $no_ets = 1; + } + } elsif ($dist =~ /^sles(\d+)$/) { + if ($1 > 11) { + $no_ets = 1; + } + } elsif ($dist =~ /^fedora(\d+)$/) { + if ($1 < 7) { + $no_ets = 1; + } + } + unless ($no_ets) { + &Authen::Krb5::init_ets(); + } &status('Accepted connection'); # ============================================================================= @@ -4875,19 +7086,17 @@ sub make_new_child { # ----------------------------------------------------------------------------- # see if we know client and 'check' for spoof IP by ineffective challenge - ReadManagerTable; # May also be a manager!! - my $outsideip=$clientip; if ($clientip eq '127.0.0.1') { - $outsideip=$hostip{$perlvar{'lonHostID'}}; + $outsideip=&Apache::lonnet::get_host_ip($perlvar{'lonHostID'}); } - - my $clientrec=($hostid{$outsideip} ne undef); + &ReadManagerTable(); + my $clientrec=defined(&Apache::lonnet::get_hosts_from_ip($outsideip)); my $ismanager=($managers{$outsideip} ne undef); - $clientname = "[unknonwn]"; + $clientname = "[unknown]"; if($clientrec) { # Establish client type. $ConnectionType = "client"; - $clientname = $hostid{$outsideip}; + $clientname = (&Apache::lonnet::get_hosts_from_ip($outsideip))[-1]; if($ismanager) { $ConnectionType = "both"; } @@ -4906,13 +7115,19 @@ sub make_new_child { my $remotereq=<$client>; chomp($remotereq); Debug("Got init: $remotereq"); - my $inikeyword = split(/:/, $remotereq); + if ($remotereq =~ /^init/) { &sethost("sethost:$perlvar{'lonHostID'}"); # # If the remote is attempting a local init... give that a try: # - my ($i, $inittype) = split(/:/, $remotereq); + (my $i, my $inittype, $clientversion) = split(/:/, $remotereq); + # For LON-CAPA 2.9, the client session will have sent its LON-CAPA + # version when initiating the connection. For LON-CAPA 2.8 and older, + # the version is retrieved from the global %loncaparevs in lonnet.pm. + # $clientversion contains path to keyfile if $inittype eq 'local' + # it's overridden below in this case + $clientversion ||= $Apache::lonnet::loncaparevs{$clientname}; # If the connection type is ssl, but I didn't get my # certificate files yet, then I'll drop back to @@ -4932,6 +7147,7 @@ sub make_new_child { } if($inittype eq "local") { + $clientversion = $perlvar{'lonVersion'}; my $key = LocalConnection($client, $remotereq); if($key) { Debug("Got local key $key"); @@ -4939,7 +7155,7 @@ sub make_new_child { my $cipherkey = pack("H32", $key); $cipher = new IDEA($cipherkey); print $client "ok:local\n"; - &logthis('' . "Successful local authentication "); $keymode = "local" } else { @@ -4976,7 +7192,6 @@ sub make_new_child { ."Attempted insecure connection disallowed "); close $client; $clientok = 0; - } } } else { @@ -4985,7 +7200,6 @@ sub make_new_child { ."$clientip failed to initialize: >$remotereq< "); &status('No init '.$clientip); } - } else { &logthis( "WARNING: Unknown client $clientip"); @@ -4994,20 +7208,18 @@ sub make_new_child { if ($clientok) { # ---------------- New known client connecting, could mean machine online again - - foreach my $id (keys(%hostip)) { - if ($hostip{$id} ne $clientip || - $hostip{$currenthostid} eq $clientip) { - # no need to try to do recon's to myself - next; - } - &reconlonc("$perlvar{'lonSockDir'}/$id"); + if (&Apache::lonnet::get_host_ip($currenthostid) ne $clientip + && $clientip ne '127.0.0.1') { + &Apache::lonnet::reconlonc($clientname); } &logthis("Established connection: $clientname"); &status('Will listen to '.$clientname); # ------------------------------------------------------------ Process requests my $keep_going = 1; my $user_input; + my $clienthost = &Apache::lonnet::hostname($clientname); + my $clientserverhomeID = &Apache::lonnet::get_server_homeID($clienthost); + $clienthomedom = &Apache::lonnet::host_domain($clientserverhomeID); while(($user_input = get_request) && $keep_going) { alarm(120); Debug("Main: Got $user_input\n"); @@ -5057,19 +7269,29 @@ sub is_author { # Author role should show up as a key /domain/_au - my $key = "/$domain/_au"; - my $value = $hashref->{$key}; + my $value; + if ($hashref) { - if(defined($value)) { - &Debug("$user @ $domain is an author"); + my $key = "/$domain/_au"; + if (defined($hashref)) { + $value = $hashref->{$key}; + if(!untie_user_hash($hashref)) { + return 'error: ' . ($!+0)." untie (GDBM) Failed"; + } + } + + if(defined($value)) { + &Debug("$user @ $domain is an author"); + } + } else { + return 'error: '.($!+0)." tie (GDBM) Failed"; } return defined($value); } # # Checks to see if the input roleput request was to set -# an author role. If so, invokes the lchtmldir script to set -# up a correct public_html +# an author role. If so, creates construction space # Parameters: # request - The request sent to the rolesput subchunk. # We're looking for /domain/_au @@ -5079,16 +7301,15 @@ sub is_author { # sub manage_permissions { my ($request, $domain, $user, $authtype) = @_; - - &Debug("manage_permissions: $request $domain $user $authtype"); - # See if the request is of the form /$domain/_au if($request =~ /^(\/\Q$domain\E\/_au)$/) { # It's an author rolesput... - my $execdir = $perlvar{'lonDaemons'}; - my $userhome= "/home/$user" ; - &logthis("system $execdir/lchtmldir $userhome $user $authtype"); - &Debug("Setting homedir permissions for $userhome"); - system("$execdir/lchtmldir $userhome $user $authtype"); + my $path=$perlvar{'lonDocRoot'}."/priv/$domain"; + unless (-e $path) { + mkdir($path); + } + unless (-e $path.'/'.$user) { + mkdir($path.'/'.$user); + } } } @@ -5136,15 +7357,25 @@ sub password_filename { # domain - domain of the user. # name - User's name. # contents - New contents of the file. +# saveold - (optional). If true save old file in a passwd.bak file. # Returns: # 0 - Failed. # 1 - Success. # sub rewrite_password_file { - my ($domain, $user, $contents) = @_; + my ($domain, $user, $contents, $saveold) = @_; my $file = &password_filename($domain, $user); if (defined $file) { + if ($saveold) { + my $bakfile = $file.'.bak'; + if (CopyFile($file,$bakfile)) { + chmod(0400,$bakfile); + &logthis("Old password saved in passwd.bak for internally authenticated user: $user:$domain"); + } else { + &logthis("Failed to save old password in passwd.bak for internally authenticated user: $user:$domain"); + } + } my $pf = IO::File->new(">$file"); if($pf) { print $pf "$contents\n"; @@ -5163,9 +7394,7 @@ sub rewrite_password_file { # Returns the authorization type or nouser if there is no such user. # -sub get_auth_type -{ - +sub get_auth_type { my ($domain, $user) = @_; Debug("get_auth_type( $domain, $user ) \n"); @@ -5201,8 +7430,7 @@ sub get_auth_type # 0 - The domain,user,password triplet is not a valid user. # sub validate_user { - my ($domain, $user, $password) = @_; - + my ($domain, $user, $password, $checkdefauth) = @_; # Why negative ~pi you may well ask? Well this function is about # authentication, and therefore very important to get right. @@ -5225,10 +7453,41 @@ sub validate_user { my $null = pack("C",0); # Used by kerberos auth types. + if ($howpwd eq 'nouser') { + if ($checkdefauth) { + my %domdefaults = &Apache::lonnet::get_domain_defaults($domain); + if ($domdefaults{'auth_def'} eq 'localauth') { + $howpwd = $domdefaults{'auth_def'}; + $contentpwd = $domdefaults{'auth_arg_def'}; + } elsif ((($domdefaults{'auth_def'} eq 'krb4') || + ($domdefaults{'auth_def'} eq 'krb5')) && + ($domdefaults{'auth_arg_def'} ne '')) { + $howpwd = $domdefaults{'auth_def'}; + $contentpwd = $domdefaults{'auth_arg_def'}; + } + } + } if ($howpwd ne 'nouser') { - if($howpwd eq "internal") { # Encrypted is in local password file. - $validated = (crypt($password, $contentpwd) eq $contentpwd); + if (length($contentpwd) == 13) { + $validated = (crypt($password,$contentpwd) eq $contentpwd); + if ($validated) { + my %domdefaults = &Apache::lonnet::get_domain_defaults($domain); + if ($domdefaults{'intauth_switch'}) { + my $ncpass = &hash_passwd($domain,$password); + my $saveold; + if ($domdefaults{'intauth_switch'} == 2) { + $saveold = 1; + } + if (&rewrite_password_file($domain,$user,"$howpwd:$ncpass",$saveold)) { + &update_passwd_history($user,$domain,$howpwd,'conversion'); + &logthis("Validated password hashed with bcrypt for $user:$domain"); + } + } + } + } else { + $validated = &check_internal_passwd($password,$contentpwd,$domain,$user); + } } elsif ($howpwd eq "unix") { # User is a normal unix user. $contentpwd = (getpwnam($user))[1]; @@ -5248,47 +7507,34 @@ sub validate_user { } else { $validated = 0; } - } - elsif ($howpwd eq "krb4") { # user is in kerberos 4 auth. domain. - if(! ($password =~ /$null/) ) { - my $k4error = &Authen::Krb4::get_pw_in_tkt($user, - "", - $contentpwd,, - 'krbtgt', - $contentpwd, - 1, - $password); - if(!$k4error) { - $validated = 1; - } else { - $validated = 0; - &logthis('krb4: '.$user.', '.$contentpwd.', '. - &Authen::Krb4::get_err_txt($Authen::Krb4::error)); - } - } else { - $validated = 0; # Password has a match with null. - } + } elsif ($howpwd eq "krb4") { # user is in kerberos 4 auth. domain. + my $checkwithkrb5 = 0; + if ($dist =~/^fedora(\d+)$/) { + if ($1 > 11) { + $checkwithkrb5 = 1; + } + } elsif ($dist =~ /^suse([\d.]+)$/) { + if ($1 > 11.1) { + $checkwithkrb5 = 1; + } + } + if ($checkwithkrb5) { + $validated = &krb5_authen($password,$null,$user,$contentpwd); + } else { + $validated = &krb4_authen($password,$null,$user,$contentpwd); + } } elsif ($howpwd eq "krb5") { # User is in kerberos 5 auth. domain. - if(!($password =~ /$null/)) { # Null password not allowed. - my $krbclient = &Authen::Krb5::parse_name($user.'@' - .$contentpwd); - my $krbservice = "krbtgt/".$contentpwd."\@".$contentpwd; - my $krbserver = &Authen::Krb5::parse_name($krbservice); - my $credentials= &Authen::Krb5::cc_default(); - $credentials->initialize($krbclient); - my $krbreturn = &Authen::Krb5::get_in_tkt_with_password($krbclient, - $krbserver, - $password, - $credentials); - $validated = ($krbreturn == 1); - } else { - $validated = 0; - } + $validated = &krb5_authen($password,$null,$user,$contentpwd); } elsif ($howpwd eq "localauth") { # Authenticate via installation specific authentcation method: $validated = &localauth::localauth($user, $password, - $contentpwd); + $contentpwd, + $domain); + if ($validated < 0) { + &logthis("localauth for $contentpwd $user:$domain returned a $validated"); + $validated = 0; + } } else { # Unrecognized auth is also bad. $validated = 0; } @@ -5309,13 +7555,115 @@ sub validate_user { return $validated; } +sub check_internal_passwd { + my ($plainpass,$stored,$domain,$user) = @_; + my (undef,$method,@rest) = split(/!/,$stored); + if ($method eq 'bcrypt') { + my $result = &hash_passwd($domain,$plainpass,@rest); + if ($result ne $stored) { + return 0; + } + my %domdefaults = &Apache::lonnet::get_domain_defaults($domain); + if ($domdefaults{'intauth_check'}) { + # Upgrade to a larger number of rounds if necessary + my $defaultcost = $domdefaults{'intauth_cost'}; + if (($defaultcost eq '') || ($defaultcost =~ /D/)) { + $defaultcost = 10; + } + if (int($rest[0])initialize(&Authen::Krb5::parse_name($user.'@' + .$contentpwd)); + my $krbreturn; + if (exists(&Authen::Krb5::get_init_creds_password)) { + $krbreturn = + &Authen::Krb5::get_init_creds_password($krbclient,$password, + $krbservice); + $validated = (ref($krbreturn) eq 'Authen::Krb5::Creds'); + } else { + $krbreturn = + &Authen::Krb5::get_in_tkt_with_password($krbclient,$krbserver, + $password,$credentials); + $validated = ($krbreturn == 1); + } + if (!$validated) { + &logthis('krb5: '.$user.', '.$contentpwd.', '. + &Authen::Krb5::error()); + } + } + return $validated; +} sub addline { my ($fname,$hostid,$ip,$newline)=@_; my $contents; my $found=0; - my $expr='^'.$hostid.':'.$ip.':'; - $expr =~ s/\./\\\./g; + my $expr='^'.quotemeta($hostid).':'.quotemeta($ip).':'; my $sh; if ($sh=IO::File->new("$fname.subscription")) { while (my $subline=<$sh>) { @@ -5331,39 +7679,51 @@ sub addline { } sub get_chat { - my ($cdom,$cname,$udom,$uname)=@_; - my %hash; - my $proname=&propath($cdom,$cname); + my ($cdom,$cname,$udom,$uname,$group)=@_; + my @entries=(); - if (tie(%hash,'GDBM_File',"$proname/nohist_chatroom.db", - &GDBM_READER(),0640)) { - @entries=map { $_.':'.$hash{$_} } sort keys %hash; - untie %hash; + my $namespace = 'nohist_chatroom'; + my $namespace_inroom = 'nohist_inchatroom'; + if ($group ne '') { + $namespace .= '_'.$group; + $namespace_inroom .= '_'.$group; + } + my $hashref = &tie_user_hash($cdom, $cname, $namespace, + &GDBM_READER()); + if ($hashref) { + @entries=map { $_.':'.$hashref->{$_} } sort(keys(%$hashref)); + &untie_user_hash($hashref); } my @participants=(); my $cutoff=time-60; - if (tie(%hash,'GDBM_File',"$proname/nohist_inchatroom.db", - &GDBM_WRCREAT(),0640)) { - $hash{$uname.':'.$udom}=time; - foreach (sort keys %hash) { - if ($hash{$_}>$cutoff) { - $participants[$#participants+1]='active_participant:'.$_; + $hashref = &tie_user_hash($cdom, $cname, $namespace_inroom, + &GDBM_WRCREAT()); + if ($hashref) { + $hashref->{$uname.':'.$udom}=time; + foreach my $user (sort(keys(%$hashref))) { + if ($hashref->{$user}>$cutoff) { + push(@participants, 'active_participant:'.$user); } } - untie %hash; + &untie_user_hash($hashref); } return (@participants,@entries); } sub chat_add { - my ($cdom,$cname,$newchat)=@_; - my %hash; - my $proname=&propath($cdom,$cname); + my ($cdom,$cname,$newchat,$group)=@_; my @entries=(); my $time=time; - if (tie(%hash,'GDBM_File',"$proname/nohist_chatroom.db", - &GDBM_WRCREAT(),0640)) { - @entries=map { $_.':'.$hash{$_} } sort keys %hash; + my $namespace = 'nohist_chatroom'; + my $logfile = 'chatroom.log'; + if ($group ne '') { + $namespace .= '_'.$group; + $logfile = 'chatroom_'.$group.'.log'; + } + my $hashref = &tie_user_hash($cdom, $cname, $namespace, + &GDBM_WRCREAT()); + if ($hashref) { + @entries=map { $_.':'.$hashref->{$_} } sort(keys(%$hashref)); my ($lastid)=($entries[$#entries]=~/^(\w+)\:/); my ($thentime,$idnum)=split(/\_/,$lastid); my $newid=$time.'_000000'; @@ -5373,21 +7733,22 @@ sub chat_add { $idnum=substr('000000'.$idnum,-6,6); $newid=$time.'_'.$idnum; } - $hash{$newid}=$newchat; + $hashref->{$newid}=$newchat; my $expired=$time-3600; - foreach (keys %hash) { - my ($thistime)=($_=~/(\d+)\_/); + foreach my $comment (keys(%$hashref)) { + my ($thistime) = ($comment=~/(\d+)\_/); if ($thistime<$expired) { - delete $hash{$_}; + delete $hashref->{$comment}; } } - untie %hash; - } - { - my $hfh; - if ($hfh=IO::File->new(">>$proname/chatroom.log")) { - print $hfh "$time:".&unescape($newchat)."\n"; + { + my $proname=&propath($cdom,$cname); + if (open(CHATLOG,">>$proname/$logfile")) { + print CHATLOG ("$time:".&unescape($newchat)."\n"); + } + close(CHATLOG); } + &untie_user_hash($hashref); } } @@ -5509,7 +7870,9 @@ sub subscribe { # the metadata unless ($fname=~/\.meta$/) { &unsub("$fname.meta",$clientip); } $fname=~s/\/home\/httpd\/html\/res/raw/; - $fname="http://$thisserver/".$fname; + my $protocol = $Apache::lonnet::protocol{$perlvar{'lonHostID'}}; + $protocol = 'http' if ($protocol ne 'https'); + $fname=$protocol.'://'.&Apache::lonnet::hostname($perlvar{'lonHostID'})."/".$fname; $result="$fname\n"; } } else { @@ -5551,26 +7914,26 @@ sub change_unix_password { sub make_passwd_file { - my ($uname, $umode,$npass,$passfilename)=@_; - my $result="ok\n"; + my ($uname,$udom,$umode,$npass,$passfilename,$action)=@_; + my $result="ok"; if ($umode eq 'krb4' or $umode eq 'krb5') { { my $pf = IO::File->new(">$passfilename"); if ($pf) { print $pf "$umode:$npass\n"; + &update_passwd_history($uname,$udom,$umode,$action); } else { $result = "pass_file_failed_error"; } } } elsif ($umode eq 'internal') { - my $salt=time; - $salt=substr($salt,6,2); - my $ncpass=crypt($npass,$salt); + my $ncpass = &hash_passwd($udom,$npass); { &Debug("Creating internal auth"); my $pf = IO::File->new(">$passfilename"); if($pf) { print $pf "internal:$ncpass\n"; + &update_passwd_history($uname,$udom,$umode,$action); } else { $result = "pass_file_failed_error"; } @@ -5580,60 +7943,14 @@ sub make_passwd_file { my $pf = IO::File->new(">$passfilename"); if($pf) { print $pf "localauth:$npass\n"; + &update_passwd_history($uname,$udom,$umode,$action); } else { $result = "pass_file_failed_error"; } } } elsif ($umode eq 'unix') { - { - # - # Don't allow the creation of privileged accounts!!! that would - # be real bad!!! - # - my $uid = getpwnam($uname); - if((defined $uid) && ($uid == 0)) { - &logthis(">>>Attempted to create privilged account blocked"); - return "no_priv_account_error\n"; - } - - my $execpath ="$perlvar{'lonDaemons'}/"."lcuseradd"; - - my $lc_error_file = $execdir."/tmp/lcuseradd".$$.".status"; - { - &Debug("Executing external: ".$execpath); - &Debug("user = ".$uname.", Password =". $npass); - my $se = IO::File->new("|$execpath > $perlvar{'lonDaemons'}/logs/lcuseradd.log"); - print $se "$uname\n"; - print $se "$npass\n"; - print $se "$npass\n"; - print $se "$lc_error_file\n"; # Status -> unique file. - } - if (-r $lc_error_file) { - &Debug("Opening error file: $lc_error_file"); - my $error = IO::File->new("< $lc_error_file"); - my $useraddok = <$error>; - $error->close; - unlink($lc_error_file); - - chomp $useraddok; - - if($useraddok > 0) { - my $error_text = &lcuseraddstrerror($useraddok); - &logthis("Failed lcuseradd: $error_text"); - $result = "lcuseradd_failed:$error_text\n"; - } else { - my $pf = IO::File->new(">$passfilename"); - if($pf) { - print $pf "unix:\n"; - } else { - $result = "pass_file_failed_error"; - } - } - } else { - &Debug("Could not locate lcuseradd error: $lc_error_file"); - $result="bug_lcuseradd_no_output_file"; - } - } + &logthis(">>>Attempt to create unix account blocked -- unix auth not available for new users."); + $result="no_new_unix_accounts"; } elsif ($umode eq 'none') { { my $pf = IO::File->new("> $passfilename"); @@ -5644,7 +7961,7 @@ sub make_passwd_file { } } } else { - $result="auth_mode_error\n"; + $result="auth_mode_error"; } return $result; } @@ -5657,11 +7974,17 @@ sub convert_photo { sub sethost { my ($remotereq) = @_; my (undef,$hostid)=split(/:/,$remotereq); + # ignore sethost if we are already correct + if ($hostid eq $currenthostid) { + return 'ok'; + } + if (!defined($hostid)) { $hostid=$perlvar{'lonHostID'}; } - if ($hostip{$perlvar{'lonHostID'}} eq $hostip{$hostid}) { + if (&Apache::lonnet::get_host_ip($perlvar{'lonHostID'}) + eq &Apache::lonnet::get_host_ip($hostid)) { $currenthostid =$hostid; - $currentdomainid=$hostdom{$hostid}; - &logthis("Setting hostid to $hostid, and domain to $currentdomainid"); + $currentdomainid=&Apache::lonnet::host_domain($hostid); +# &logthis("Setting hostid to $hostid, and domain to $currentdomainid"); } else { &logthis("Requested host id $hostid not an alias of ". $perlvar{'lonHostID'}." refusing connection"); @@ -5676,95 +7999,36 @@ sub version { return "version:$VERSION"; } -#There is a copy of this in lonnet.pm -sub userload { - my $numusers=0; - { - opendir(LONIDS,$perlvar{'lonIDsDir'}); - my $filename; - my $curtime=time; - while ($filename=readdir(LONIDS)) { - if ($filename eq '.' || $filename eq '..') {next;} - my ($mtime)=(stat($perlvar{'lonIDsDir'}.'/'.$filename))[9]; - if ($curtime-$mtime < 1800) { $numusers++; } - } - closedir(LONIDS); - } - my $userloadpercent=0; - my $maxuserload=$perlvar{'lonUserLoadLim'}; - if ($maxuserload) { - $userloadpercent=100*$numusers/$maxuserload; - } - $userloadpercent=sprintf("%.2f",$userloadpercent); - return $userloadpercent; -} - -# Routines for serializing arrays and hashes (copies from lonnet) - -sub array2str { - my (@array) = @_; - my $result=&arrayref2str(\@array); - $result=~s/^__ARRAY_REF__//; - $result=~s/__END_ARRAY_REF__$//; - return $result; -} - -sub arrayref2str { - my ($arrayref) = @_; - my $result='__ARRAY_REF__'; - foreach my $elem (@$arrayref) { - if(ref($elem) eq 'ARRAY') { - $result.=&arrayref2str($elem).'&'; - } elsif(ref($elem) eq 'HASH') { - $result.=&hashref2str($elem).'&'; - } elsif(ref($elem)) { - #print("Got a ref of ".(ref($elem))." skipping."); - } else { - $result.=&escape($elem).'&'; - } - } - $result=~s/\&$//; - $result .= '__END_ARRAY_REF__'; - return $result; -} - -sub hash2str { - my (%hash) = @_; - my $result=&hashref2str(\%hash); - $result=~s/^__HASH_REF__//; - $result=~s/__END_HASH_REF__$//; - return $result; -} - -sub hashref2str { - my ($hashref)=@_; - my $result='__HASH_REF__'; - foreach (sort(keys(%$hashref))) { - if (ref($_) eq 'ARRAY') { - $result.=&arrayref2str($_).'='; - } elsif (ref($_) eq 'HASH') { - $result.=&hashref2str($_).'='; - } elsif (ref($_)) { - $result.='='; - #print("Got a ref of ".(ref($_))." skipping."); - } else { - if ($_) {$result.=&escape($_).'=';} else { last; } - } - - if(ref($hashref->{$_}) eq 'ARRAY') { - $result.=&arrayref2str($hashref->{$_}).'&'; - } elsif(ref($hashref->{$_}) eq 'HASH') { - $result.=&hashref2str($hashref->{$_}).'&'; - } elsif(ref($hashref->{$_})) { - $result.='&'; - #print("Got a ref of ".(ref($hashref->{$_}))." skipping."); - } else { - $result.=&escape($hashref->{$_}).'&'; - } - } - $result=~s/\&$//; - $result .= '__END_HASH_REF__'; - return $result; +sub get_usersession_config { + my ($dom,$name) = @_; + my ($usersessionconf,$cached)=&Apache::lonnet::is_cached_new($name,$dom); + if (defined($cached)) { + return $usersessionconf; + } else { + my %domconfig = &Apache::lonnet::get_dom('configuration',['usersessions'],$dom); + if (ref($domconfig{'usersessions'}) eq 'HASH') { + &Apache::lonnet::do_cache_new($name,$dom,$domconfig{'usersessions'},3600); + return $domconfig{'usersessions'}; + } + } + return; +} + +sub get_usersearch_config { + my ($dom,$name) = @_; + my ($usersearchconf,$cached)=&Apache::lonnet::is_cached_new($name,$dom); + if (defined($cached)) { + return $usersearchconf; + } else { + my %domconfig = &Apache::lonnet::get_dom('configuration',['directorysrch'],$dom); + &Apache::lonnet::do_cache_new($name,$dom,$domconfig{'directorysrch'},3600); + return $domconfig{'directorysrch'}; + } + return; +} + +sub distro_and_arch { + return $dist.':'.$arch; } # ----------------------------------- POD (plain old documentation, CPAN style) @@ -5974,7 +8238,7 @@ Place in B stores hash in namespace -=item rolesputy +=item rolesput put a role into a user's environment @@ -6082,7 +8346,6 @@ to the client, and the connection is clo IO::Socket IO::File Apache::File -Symbol POSIX Crypt::IDEA LWP::UserAgent() @@ -6101,3 +8364,408 @@ linux Server/Process =cut + + +=pod + +=head1 LOG MESSAGES + +The messages below can be emitted in the lond log. This log is located +in ~httpd/perl/logs/lond.log Many log messages have HTML encapsulation +to provide coloring if examined from inside a web page. Some do not. +Where color is used, the colors are; Red for sometihhng to get excited +about and to follow up on. Yellow for something to keep an eye on to +be sure it does not get worse, Green,and Blue for informational items. + +In the discussions below, sometimes reference is made to ~httpd +when describing file locations. There isn't really an httpd +user, however there is an httpd directory that gets installed in the +place that user home directories go. On linux, this is usually +(always?) /home/httpd. + + +Some messages are colorless. These are usually (not always) +Green/Blue color level messages. + +=over 2 + +=item (Red) LocalConnection rejecting non local: ne 127.0.0.1 + +A local connection negotiation was attempted by +a host whose IP address was not 127.0.0.1. +The socket is closed and the child will exit. +lond has three ways to establish an encyrption +key with a client: + +=over 2 + +=item local + +The key is written and read from a file. +This is only valid for connections from localhost. + +=item insecure + +The key is generated by the server and +transmitted to the client. + +=item ssl (secure) + +An ssl connection is negotiated with the client, +the key is generated by the server and sent to the +client across this ssl connection before the +ssl connectionis terminated and clear text +transmission resumes. + +=back + +=item (Red) LocalConnection: caller is insane! init = and type = + +The client is local but has not sent an initialization +string that is the literal "init:local" The connection +is closed and the child exits. + +=item Red CRITICAL Can't get key file + +SSL key negotiation is being attempted but the call to +lonssl::KeyFile failed. This usually means that the +configuration file is not correctly defining or protecting +the directories/files lonCertificateDirectory or +lonnetPrivateKey + is a string that describes the reason that +the key file could not be located. + +=item (Red) CRITICAL Can't get certificates + +SSL key negotiation failed because we were not able to retrives our certificate +or the CA's certificate in the call to lonssl::CertificateFile + is the textual reason this failed. Usual reasons: + +=over 2 + +=item Apache config file for loncapa incorrect: + +one of the variables +lonCertificateDirectory, lonnetCertificateAuthority, or lonnetCertificate +undefined or incorrect + +=item Permission error: + +The directory pointed to by lonCertificateDirectory is not readable by lond + +=item Permission error: + +Files in the directory pointed to by lonCertificateDirectory are not readable by lond. + +=item Installation error: + +Either the certificate authority file or the certificate have not +been installed in lonCertificateDirectory. + +=item (Red) CRITICAL SSL Socket promotion failed: + +The promotion of the connection from plaintext to SSL failed + is the reason for the failure. There are two +system calls involved in the promotion (one of which failed), +a dup to produce +a second fd on the raw socket over which the encrypted data +will flow and IO::SOcket::SSL->new_from_fd which creates +the SSL connection on the duped fd. + +=item (Blue) WARNING client did not respond to challenge + +This occurs on an insecure (non SSL) connection negotiation request. +lond generates some number from the time, the PID and sends it to +the client. The client must respond by echoing this information back. +If the client does not do so, that's a violation of the challenge +protocols and the connection will be failed. + +=item (Red) No manager table. Nobody can manage!! + +lond has the concept of privileged hosts that +can perform remote management function such +as update the hosts.tab. The manager hosts +are described in the +~httpd/lonTabs/managers.tab file. +this message is logged if this file is missing. + + +=item (Green) Registering manager as with + +Reports the successful parse and registration +of a specific manager. + +=item Green existing host + +The manager host is already defined in the hosts.tab +the information in that table, rather than the info in the +manager table will be used to determine the manager's ip. + +=item (Red) Unable to craete + +lond has been asked to create new versions of an administrative +file (by a manager). When this is done, the new file is created +in a temp file and then renamed into place so that there are always +usable administrative files, even if the update fails. This failure +message means that the temp file could not be created. +The update is abandoned, and the old file is available for use. + +=item (Green) CopyFile from to failed + +In an update of administrative files, the copy of the existing file to a +backup file failed. The installation of the new file may still succeed, +but there will not be a back up file to rever to (this should probably +be yellow). + +=item (Green) Pushfile: backed up to + +See above, the backup of the old administrative file succeeded. + +=item (Red) Pushfile: Unable to install + +The new administrative file could not be installed. In this case, +the old administrative file is still in use. + +=item (Green) Installed new < filename>. + +The new administrative file was successfullly installed. + +=item (Red) Reinitializing lond pid= + +The lonc child process will be sent a USR2 +signal. + +=item (Red) Reinitializing self + +We've been asked to re-read our administrative files,and +are doing so. + +=item (Yellow) error:Invalid process identifier + +A reinit command was received, but the target part of the +command was not valid. It must be either +'lond' or 'lonc' but was + +=item (Green) isValideditCommand checking: Command = Key = newline = + +Checking to see if lond has been handed a valid edit +command. It is possible the edit command is not valid +in that case there are no log messages to indicate that. + +=item Result of password change for pwchange_success + +The password for was +successfully changed. + +=item Unable to open passwd to change password + +Could not rewrite the +internal password file for a user + +=item Result of password change for : + +A unix password change for was attempted +and the pipe returned + +=item LWP GET: for () + +The lightweight process fetch for a resource failed +with the local filename that should +have existed/been created was the +corresponding URI: This is emitted in several +places. + +=item Unable to move to + +From fetch_user_file_handler - the user file was replicated but could not +be mv'd to its final location. + +=item Looking for + +From user_has_session_handler - This should be a Debug call instead +it indicates lond is about to check whether the specified user has a +session active on the specified domain on the local host. + +=item Client () hanging up: + +lond has been asked to exit by its client. The and identify the +client systemand is the full exit command sent to the server. + +=item Red CRITICAL: ABNORMAL EXIT. child for server died through a crass with this error->[]. + +A lond child terminated. NOte that this termination can also occur when the +child receives the QUIT or DIE signals. is the process id of the child, + the host lond is working for, and the reason the child died +to the best of our ability to get it (I would guess that any numeric value +represents and errno value). This is immediately followed by + +=item Famous last words: Catching exception - + +Where log is some recent information about the state of the child. + +=item Red CRITICAL: TIME OUT + +Some timeout occured for server . THis is normally a timeout on an LWP +doing an HTTP::GET. + +=item child died + +The reaper caught a SIGCHILD for the lond child process +This should be modified to also display the IP of the dying child +$children{$pid} + +=item Unknown child 0 died +A child died but the wait for it returned a pid of zero which really should not +ever happen. + +=item Child - looks like we missed it's death + +When a sigchild is received, the reaper process checks all children to see if they are +alive. If children are dying quite quickly, the lack of signal queuing can mean +that a signal hearalds the death of more than one child. If so this message indicates +which other one died. is the ip of a dead child + +=item Free socket: + +The HUNTSMAN sub was called due to a SIGINT in a child process. The socket is being shutdown. +for whatever reason, is printed but in fact shutdown() is not documented +to return anything. This is followed by: + +=item Red CRITICAL: Shutting down + +Just prior to exit. + +=item Free socket: + +The HUPSMAN sub was called due to a SIGHUP. all children get killsed, and lond execs itself. +This is followed by: + +=item (Red) CRITICAL: Restarting + +lond is about to exec itself to restart. + +=item (Blue) Updating connections + +(In response to a USR2). All the children (except the one for localhost) +are about to be killed, the hosts tab reread, and Apache reloaded via apachereload. + +=item (Blue) UpdateHosts killing child for ip + +Due to USR2 as above. + +=item (Green) keeping child for ip (pid = ) + +In response to USR2 as above, the child indicated is not being restarted because +it's assumed that we'll always need a child for the localhost. + + +=item Going to check on the children + +Parent is about to check on the health of the child processes. +Note that this is in response to a USR1 sent to the parent lond. +there may be one or more of the next two messages: + +=item is dead + +A child that we have in our child hash as alive has evidently died. + +=item Child did not respond + +In the health check the child did not update/produce a pid_.txt +file when sent it's USR1 signal. That process is killed with a 9 signal, as it's +assumed to be hung in some un-fixable way. + +=item Finished checking children + +Master processs's USR1 processing is cojmplete. + +=item (Red) CRITICAL: ------- Starting ------ + +(There are more '-'s on either side). Lond has forked itself off to +form a new session and is about to start actual initialization. + +=item (Green) Attempting to start child () + +Started a new child process for . Client is IO::Socket object +connected to the child. This was as a result of a TCP/IP connection from a client. + +=item Unable to determine who caller was, getpeername returned nothing + +In child process initialization. either getpeername returned undef or +a zero sized object was returned. Processing continues, but in my opinion, +this should be cause for the child to exit. + +=item Unable to determine clientip + +In child process initialization. The peer address from getpeername was not defined. +The client address is stored as "Unavailable" and processing continues. + +=item (Yellow) INFO: Connection connection type = + +In child initialization. A good connectionw as received from . + +=over 2 + +=item + +is the name of the client from hosts.tab. + +=item + +Is the connection type which is either + +=over 2 + +=item manager + +The connection is from a manager node, not in hosts.tab + +=item client + +the connection is from a non-manager in the hosts.tab + +=item both + +The connection is from a manager in the hosts.tab. + +=back + +=back + +=item (Blue) Certificates not installed -- trying insecure auth + +One of the certificate file, key file or +certificate authority file could not be found for a client attempting +SSL connection intiation. COnnection will be attemptied in in-secure mode. +(this would be a system with an up to date lond that has not gotten a +certificate from us). + +=item (Green) Successful local authentication + +A local connection successfully negotiated the encryption key. +In this case the IDEA key is in a file (that is hopefully well protected). + +=item (Green) Successful ssl authentication with + +The client ( is the peer's name in hosts.tab), has successfully +negotiated an SSL connection with this child process. + +=item (Green) Successful insecure authentication with + + +The client has successfully negotiated an insecure connection withthe child process. + +=item (Yellow) Attempted insecure connection disallowed + +The client attempted and failed to successfully negotiate a successful insecure +connection. This can happen either because the variable londAllowInsecure is false +or undefined, or becuse the child did not successfully echo back the challenge +string. + + +=back + +=back + + +=cut 500 Internal Server Error

Internal Server Error

The server encountered an internal error or misconfiguration and was unable to complete your request.

Please contact the server administrator at root@localhost to inform them of the time this error occurred, and the actions you performed just before this error.

More information about this error may be available in the server error log.