[BACK]Return to lond CVS log [TXT] [DIR] Up to [LON-CAPA] / loncom

Diff for /loncom/lond between versions 1.489.2.40 and 1.501

version 1.489.2.40, 2021/02/10 15:05:51 version 1.501, 2013/07/25 19:11:07
Line 15 Line 15
 #  #
 # LON-CAPA is distributed in the hope that it will be useful,  # LON-CAPA is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of  # but WITHOUT ANY WARRANTY; without even the implied warranty of
   
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the  # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.  # GNU General Public License for more details.
 #  #
Line 54  use LONCAPA::lonssl; Line 55  use LONCAPA::lonssl;
 use Fcntl qw(:flock);  use Fcntl qw(:flock);
 use Apache::lonnet;  use Apache::lonnet;
 use Mail::Send;  use Mail::Send;
 use Crypt::Eksblowfish::Bcrypt;  
 use Digest::SHA;  
 use Encode;  
   
 my $DEBUG = 0;       # Non zero to enable debug log entries.  my $DEBUG = 0;       # Non zero to enable debug log entries.
   
Line 132  my @passwderrors = ("ok", Line 130  my @passwderrors = ("ok",
    "pwchange_failure - lcpasswd Error filename is invalid");     "pwchange_failure - lcpasswd Error filename is invalid");
   
   
   #  The array below are lcuseradd error strings.:
   
   my $lastadderror = 13;
   my @adderrors    = ("ok",
       "User ID mismatch, lcuseradd must run as user www",
       "lcuseradd Incorrect number of command line parameters must be 3",
       "lcuseradd Incorrect number of stdinput lines, must be 3",
       "lcuseradd Too many other simultaneous pwd changes in progress",
       "lcuseradd User does not exist",
       "lcuseradd Unable to make www member of users's group",
       "lcuseradd Unable to su to root",
       "lcuseradd Unable to set password",
       "lcuseradd Username has invalid characters",
       "lcuseradd Password has an invalid character",
       "lcuseradd User already exists",
       "lcuseradd Could not add user.",
       "lcuseradd Password mismatch");
   
   
 # This array are the errors from lcinstallfile:  # This array are the errors from lcinstallfile:
   
 my @installerrors = ("ok",  my @installerrors = ("ok",
Line 623  sub ConfigFileFromSelector { Line 640  sub ConfigFileFromSelector {
 #     String to send to client ("ok" or "refused" if bad file).  #     String to send to client ("ok" or "refused" if bad file).
 #  #
 sub PushFile {  sub PushFile {
     my $request = shift;      my $request = shift;    
     my ($command, $filename, $contents) = split(":", $request, 3);      my ($command, $filename, $contents) = split(":", $request, 3);
     &Debug("PushFile");      &Debug("PushFile");
           
Line 653  sub PushFile { Line 670  sub PushFile {
   
     if($filename eq "host") {      if($filename eq "host") {
  $contents = AdjustHostContents($contents);   $contents = AdjustHostContents($contents);
     } elsif ($filename eq 'dns_host' || $filename eq 'dns_domain') {  
         if ($contents eq '') {  
             &logthis('<font color="red"> Pushfile: unable to install '  
                     .$tablefile." - no data received from push. </font>");  
             return 'error: push had no data';  
         }  
         if (&Apache::lonnet::get_host_ip($clientname)) {  
             my $clienthost = &Apache::lonnet::hostname($clientname);  
             if ($managers{$clientip} eq $clientname) {  
                 my $clientprotocol = $Apache::lonnet::protocol{$clientname};  
                 $clientprotocol = 'http' if ($clientprotocol ne 'https');  
                 my $url = '/adm/'.$filename;  
                 $url =~ s{_}{/};  
                 my $ua=new LWP::UserAgent;  
                 $ua->timeout(60);  
                 my $request=new HTTP::Request('GET',"$clientprotocol://$clienthost$url");  
                 my $response=$ua->request($request);  
                 if ($response->is_error()) {  
                     &logthis('<font color="red"> Pushfile: unable to install '  
                             .$tablefile." - error attempting to pull data. </font>");  
                     return 'error: pull failed';  
                 } else {  
                     my $result = $response->content;  
                     chomp($result);  
                     unless ($result eq $contents) {  
                         &logthis('<font color="red"> Pushfile: unable to install '  
                                 .$tablefile." - pushed data and pulled data differ. </font>");  
                         my $pushleng = length($contents);  
                         my $pullleng = length($result);  
                         if ($pushleng != $pullleng) {  
                             return "error: $pushleng vs $pullleng bytes";  
                         } else {  
                             return "error: mismatch push and pull";  
                         }  
                     }  
                 }  
             }  
         }  
     }      }
   
     #  Install the new file:      #  Install the new file:
Line 1424  sub du2_handler { Line 1403  sub du2_handler {
 #    selected directory the filename followed by the full output of  #    selected directory the filename followed by the full output of
 #    the stat function is returned.  The returned info for each  #    the stat function is returned.  The returned info for each
 #    file are separated by ':'.  The stat fields are separated by &'s.  #    file are separated by ':'.  The stat fields are separated by &'s.
 #  
 #    If the requested path contains /../ or is:  
 #  
 #    1. for a directory, and the path does not begin with one of:  
 #        (a) /home/httpd/html/res/<domain>  
 #        (b) /home/httpd/html/userfiles/  
 #        (c) /home/httpd/lonUsers/<domain>/<1>/<2>/<3>/<username>/userfiles  
 #    or is:  
 #  
 #    2. for a file, and the path (after prepending) does not begin with one of:  
 #        (a) /home/httpd/lonUsers/<domain>/<1>/<2>/<3>/<username>/  
 #        (b) /home/httpd/html/res/<domain>/<username>/  
 #        (c) /home/httpd/html/userfiles/<domain>/<username>/  
 #  
 #    the response will be "refused".  
 #  
 # Parameters:  # Parameters:
 #    $cmd        - The command that dispatched us (ls).  #    $cmd        - The command that dispatched us (ls).
 #    $ulsdir     - The directory path to list... I'm not sure what this  #    $ulsdir     - The directory path to list... I'm not sure what this
Line 1461  sub ls_handler { Line 1424  sub ls_handler {
     my $rights;      my $rights;
     my $ulsout='';      my $ulsout='';
     my $ulsfn;      my $ulsfn;
     if ($ulsdir =~m{/\.\./}) {  
         &Failure($client,"refused\n",$userinput);  
         return 1;  
     }  
     if (-e $ulsdir) {      if (-e $ulsdir) {
  if(-d $ulsdir) {   if(-d $ulsdir) {
             unless (($ulsdir =~ m{^/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) ||  
                     ($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/userfiles})) {  
                 &Failure($client,"refused\n",$userinput);  
                 return 1;  
             }  
     if (opendir(LSDIR,$ulsdir)) {      if (opendir(LSDIR,$ulsdir)) {
  while ($ulsfn=readdir(LSDIR)) {   while ($ulsfn=readdir(LSDIR)) {
     undef($obs);      undef($obs);
Line 1495  sub ls_handler { Line 1449  sub ls_handler {
  closedir(LSDIR);   closedir(LSDIR);
     }      }
  } else {   } else {
             unless (($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/}) ||  
                     ($ulsdir =~ m{^/home/httpd/html/(?:res|userfiles)/$LONCAPA::match_domain/$LONCAPA::match_name/})) {   
                 &Failure($client,"refused\n",$userinput);  
                 return 1;  
             }  
     my @ulsstats=stat($ulsdir);      my @ulsstats=stat($ulsdir);
     $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';      $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
  }   }
Line 1524  sub ls_handler { Line 1473  sub ls_handler {
 #    selected directory the filename followed by the full output of  #    selected directory the filename followed by the full output of
 #    the stat function is returned.  The returned info for each  #    the stat function is returned.  The returned info for each
 #    file are separated by ':'.  The stat fields are separated by &'s.  #    file are separated by ':'.  The stat fields are separated by &'s.
 #  
 #    If the requested path contains /../ or is:  
 #  
 #    1. for a directory, and the path does not begin with one of:  
 #        (a) /home/httpd/html/res/<domain>  
 #        (b) /home/httpd/html/userfiles/  
 #        (c) /home/httpd/lonUsers/<domain>/<1>/<2>/<3>/<username>/userfiles  
 #    or is:  
 #  
 #    2. for a file, and the path (after prepending) does not begin with one of:  
 #        (a) /home/httpd/lonUsers/<domain>/<1>/<2>/<3>/<username>/  
 #        (b) /home/httpd/html/res/<domain>/<username>/  
 #        (c) /home/httpd/html/userfiles/<domain>/<username>/  
 #  
 #    the response will be "refused".  
 #  
 # Parameters:  # Parameters:
 #    $cmd        - The command that dispatched us (ls).  #    $cmd        - The command that dispatched us (ls).
 #    $ulsdir     - The directory path to list... I'm not sure what this  #    $ulsdir     - The directory path to list... I'm not sure what this
Line 1560  sub ls2_handler { Line 1493  sub ls2_handler {
     my $rights;      my $rights;
     my $ulsout='';      my $ulsout='';
     my $ulsfn;      my $ulsfn;
     if ($ulsdir =~m{/\.\./}) {  
         &Failure($client,"refused\n",$userinput);  
         return 1;  
     }  
     if (-e $ulsdir) {      if (-e $ulsdir) {
         if(-d $ulsdir) {          if(-d $ulsdir) {
             unless (($ulsdir =~ m{^/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) ||  
                     ($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/userfiles})) {  
                 &Failure($client,"refused\n","$userinput");  
                 return 1;  
             }  
             if (opendir(LSDIR,$ulsdir)) {              if (opendir(LSDIR,$ulsdir)) {
                 while ($ulsfn=readdir(LSDIR)) {                  while ($ulsfn=readdir(LSDIR)) {
                     undef($obs);                      undef($obs);
Line 1595  sub ls2_handler { Line 1519  sub ls2_handler {
                 closedir(LSDIR);                  closedir(LSDIR);
             }              }
         } else {          } else {
             unless (($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/}) ||  
                     ($ulsdir =~ m{^/home/httpd/html/(?:res|userfiles)/$LONCAPA::match_domain/$LONCAPA::match_name/})) {  
                 &Failure($client,"refused\n",$userinput);  
                 return 1;  
             }  
             my @ulsstats=stat($ulsdir);              my @ulsstats=stat($ulsdir);
             $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';              $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
         }          }
Line 1616  sub ls2_handler { Line 1535  sub ls2_handler {
 #    selected directory the filename followed by the full output of  #    selected directory the filename followed by the full output of
 #    the stat function is returned.  The returned info for each  #    the stat function is returned.  The returned info for each
 #    file are separated by ':'.  The stat fields are separated by &'s.  #    file are separated by ':'.  The stat fields are separated by &'s.
 #  
 #    If the requested path (after prepending) contains /../ or is:  
 #  
 #    1. for a directory, and the path does not begin with one of:  
 #        (a) /home/httpd/html/res/<domain>  
 #        (b) /home/httpd/html/userfiles/  
 #        (c) /home/httpd/lonUsers/<domain>/<1>/<2>/<3>/<username>/userfiles  
 #        (d) /home/httpd/html/priv/<domain> and client is the homeserver  
 #  
 #    or is:  
 #  
 #    2. for a file, and the path (after prepending) does not begin with one of:  
 #        (a) /home/httpd/lonUsers/<domain>/<1>/<2>/<3>/<username>/  
 #        (b) /home/httpd/html/res/<domain>/<username>/  
 #        (c) /home/httpd/html/userfiles/<domain>/<username>/  
 #        (d) /home/httpd/html/priv/<domain>/<username>/ and client is the homeserver  
 #  
 #    the response will be "refused".  
 #  
 # Parameters:  # Parameters:
 #    $cmd        - The command that dispatched us (ls).  #    $cmd        - The command that dispatched us (ls).
 #    $tail       - The tail of the request that invoked us.  #    $tail       - The tail of the request that invoked us.
Line 1674  sub ls3_handler { Line 1574  sub ls3_handler {
     }      }
   
     my $dir_root = $perlvar{'lonDocRoot'};      my $dir_root = $perlvar{'lonDocRoot'};
     if (($getpropath) || ($getuserdir)) {      if ($getpropath) {
         if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) {          if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) {
             $dir_root = &propath($udom,$uname);              $dir_root = &propath($udom,$uname);
             $dir_root =~ s/\/$//;              $dir_root =~ s/\/$//;
         } else {          } else {
             &Failure($client,"refused\n",$userinput);              &Failure($client,"refused\n","$cmd:$tail");
               return 1;
           }
       } elsif ($getuserdir) {
           if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) {
               my $subdir=$uname.'__';
               $subdir =~ s/(.)(.)(.).*/$1\/$2\/$3/;
               $dir_root = $Apache::lonnet::perlvar{'lonUsersDir'}
                          ."/$udom/$subdir/$uname";
           } else {
               &Failure($client,"refused\n","$cmd:$tail");
             return 1;              return 1;
         }          }
     } elsif ($alternate_root ne '') {      } elsif ($alternate_root ne '') {
Line 1692  sub ls3_handler { Line 1602  sub ls3_handler {
             $ulsdir = $dir_root.'/'.$ulsdir;              $ulsdir = $dir_root.'/'.$ulsdir;
         }          }
     }      }
     if ($ulsdir =~m{/\.\./}) {  
         &Failure($client,"refused\n",$userinput);  
         return 1;  
     }  
     my $islocal;  
     my @machine_ids = &Apache::lonnet::current_machine_ids();  
     if (grep(/^\Q$clientname\E$/,@machine_ids)) {  
         $islocal = 1;  
     }  
     my $obs;      my $obs;
     my $rights;      my $rights;
     my $ulsout='';      my $ulsout='';
     my $ulsfn;      my $ulsfn;
     if (-e $ulsdir) {      if (-e $ulsdir) {
         if(-d $ulsdir) {          if(-d $ulsdir) {
             unless (($getpropath) || ($getuserdir) ||  
                     ($ulsdir =~ m{^/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) ||  
                     ($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/userfiles}) ||  
                     (($ulsdir =~ m{^/home/httpd/html/priv/$LONCAPA::match_domain}) && ($islocal))) {  
                 &Failure($client,"refused\n",$userinput);  
                 return 1;  
             }  
             if (opendir(LSDIR,$ulsdir)) {              if (opendir(LSDIR,$ulsdir)) {
                 while ($ulsfn=readdir(LSDIR)) {                  while ($ulsfn=readdir(LSDIR)) {
                     undef($obs);                      undef($obs);
Line 1738  sub ls3_handler { Line 1632  sub ls3_handler {
                 closedir(LSDIR);                  closedir(LSDIR);
             }              }
         } else {          } else {
             unless (($getpropath) || ($getuserdir) ||  
                     ($ulsdir =~ m{^/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_name/}) ||  
                     ($ulsdir =~ m{^/home/httpd/html/(?:res|userfiles)/$LONCAPA::match_domain/$LONCAPA::match_name/}) ||  
                     (($ulsdir =~ m{^/home/httpd/html/priv/$LONCAPA::match_domain/$LONCAPA::match_name/}) && ($islocal))) {  
                 &Failure($client,"refused\n",$userinput);  
                 return 1;  
             }  
             my @ulsstats=stat($ulsdir);              my @ulsstats=stat($ulsdir);
             $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';              $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
         }          }
Line 1795  sub read_lonnet_global { Line 1682  sub read_lonnet_global {
                 }                  }
                 if ($what eq 'perlvar') {                  if ($what eq 'perlvar') {
                     if (!exists($packagevars{$what}{'lonBalancer'})) {                      if (!exists($packagevars{$what}{'lonBalancer'})) {
                         if ($dist =~ /^(centos|rhes|fedora|scientific|oracle)/) {                          if ($dist =~ /^(centos|rhes|fedora|scientific)/) {
                             my $othervarref=LONCAPA::Configuration::read_conf('httpd.conf');                              my $othervarref=LONCAPA::Configuration::read_conf('httpd.conf');
                             if (ref($othervarref) eq 'HASH') {                              if (ref($othervarref) eq 'HASH') {
                                 $items->{'lonBalancer'} = $othervarref->{'lonBalancer'};                                  $items->{'lonBalancer'} = $othervarref->{'lonBalancer'};
Line 1817  sub read_lonnet_global { Line 1704  sub read_lonnet_global {
 sub server_devalidatecache_handler {  sub server_devalidatecache_handler {
     my ($cmd,$tail,$client) = @_;      my ($cmd,$tail,$client) = @_;
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
     my $items = &unescape($tail);      my ($name,$id) = map { &unescape($_); } split(/:/,$tail);
     my @cached = split(/\&/,$items);      &Apache::lonnet::devalidate_cache_new($name,$id);
     foreach my $key (@cached) {  
         if ($key =~ /:/) {  
             my ($name,$id) = map { &unescape($_); } split(/:/,$key);  
             &Apache::lonnet::devalidate_cache_new($name,$id);  
         }  
     }  
     my $result = 'ok';      my $result = 'ok';
     &Reply($client,\$result,$userinput);      &Reply($client,\$result,$userinput);
     return 1;      return 1;
Line 2020  sub authenticate_handler { Line 1901  sub authenticate_handler {
                 my ($remote,$hosted);                  my ($remote,$hosted);
                 my $remotesession = &get_usersession_config($udom,'remotesession');                  my $remotesession = &get_usersession_config($udom,'remotesession');
                 if (ref($remotesession) eq 'HASH') {                  if (ref($remotesession) eq 'HASH') {
                     $remote = $remotesession->{'remote'};                      $remote = $remotesession->{'remote'}
                 }                  }
                 my $hostedsession = &get_usersession_config($clienthomedom,'hostedsession');                  my $hostedsession = &get_usersession_config($clienthomedom,'hostedsession');
                 if (ref($hostedsession) eq 'HASH') {                  if (ref($hostedsession) eq 'HASH') {
                     $hosted = $hostedsession->{'hosted'};                      $hosted = $hostedsession->{'hosted'};
                 }                  }
                 my $loncaparev = $clientversion;  
                 if ($loncaparev eq '') {  
                     $loncaparev = $Apache::lonnet::loncaparevs{$clientname};  
                 }  
                 $canhost = &Apache::lonnet::can_host_session($udom,$clientname,                  $canhost = &Apache::lonnet::can_host_session($udom,$clientname,
                                                              $loncaparev,                                                               $clientversion,
                                                              $remote,$hosted);                                                               $remote,$hosted);
             }              }
         }          }
Line 2107  sub change_password_handler { Line 1984  sub change_password_handler {
     }      }
     if($validated) {      if($validated) {
  my $realpasswd  = &get_auth_type($udom, $uname); # Defined since authd.   my $realpasswd  = &get_auth_type($udom, $uname); # Defined since authd.
   
  my ($howpwd,$contentpwd)=split(/:/,$realpasswd);   my ($howpwd,$contentpwd)=split(/:/,$realpasswd);
         my $notunique;  
  if ($howpwd eq 'internal') {   if ($howpwd eq 'internal') {
     &Debug("internal auth");      &Debug("internal auth");
             my $ncpass = &hash_passwd($udom,$npass);      my $salt=time;
             my (undef,$method,@rest) = split(/!/,$contentpwd);      $salt=substr($salt,6,2);
             if ($method eq 'bcrypt') {      my $ncpass=crypt($npass,$salt);
                 my %passwdconf = &Apache::lonnet::get_passwdconf($udom);      if(&rewrite_password_file($udom, $uname, "internal:$ncpass")) {
                 if (($passwdconf{'numsaved'}) && ($passwdconf{'numsaved'} =~ /^\d+$/)) {  
                     my @oldpasswds;  
                     my $userpath = &propath($udom,$uname);  
                     my $fullpath = $userpath.'/oldpasswds';  
                     if (-d $userpath) {  
                         my @oldfiles;  
                         if (-e $fullpath) {  
                             if (opendir(my $dir,$fullpath)) {  
                                 (@oldfiles) = grep(/^\d+$/,readdir($dir));  
                                 closedir($dir);  
                             }  
                             if (@oldfiles) {  
                                 @oldfiles = sort { $b <=> $a } (@oldfiles);  
                                 my $numremoved = 0;  
                                 for (my $i=0; $i<@oldfiles; $i++) {  
                                     if ($i>=$passwdconf{'numsaved'}) {  
                                         if (-f "$fullpath/$oldfiles[$i]") {  
                                             if (unlink("$fullpath/$oldfiles[$i]")) {  
                                                 $numremoved ++;  
                                             }  
                                         }  
                                     } elsif (open(my $fh,'<',"$fullpath/$oldfiles[$i]")) {  
                                         while (my $line = <$fh>) {  
                                             push(@oldpasswds,$line);  
                                         }  
                                         close($fh);  
                                     }  
                                 }  
                                 if ($numremoved) {  
                                     &logthis("unlinked $numremoved old password files for $uname:$udom");  
                                 }  
                             }  
                         }  
                         push(@oldpasswds,$contentpwd);  
                         foreach my $item (@oldpasswds) {  
                             my (undef,$method,@rest) = split(/!/,$item);  
                             if ($method eq 'bcrypt') {  
                                 my $result = &hash_passwd($udom,$npass,@rest);  
                                 if ($result eq $item) {  
                                     $notunique = 1;  
                                     last;  
                                 }  
                             }  
                         }  
                         unless ($notunique) {  
                             unless (-e $fullpath) {  
                                 if (&mkpath("$fullpath/")) {  
                                     chmod(0700,$fullpath);  
                                 }  
                             }  
                             if (-d $fullpath) {  
                                 my $now = time;  
                                 if (open(my $fh,'>',"$fullpath/$now")) {  
                                     print $fh $contentpwd;  
                                     close($fh);  
                                     chmod(0400,"$fullpath/$now");  
                                 }  
                             }  
                         }  
                     }  
                 }  
             }  
             if ($notunique) {  
                 my $msg="Result of password change for $uname:$udom - password matches one used before";  
                 if ($lonhost) {  
                     $msg .= " - request originated from: $lonhost";  
                 }  
                 &logthis($msg);  
                 &Reply($client, "prioruse\n", $userinput);  
     } elsif (&rewrite_password_file($udom, $uname, "internal:$ncpass")) {  
  my $msg="Result of password change for $uname: pwchange_success";   my $msg="Result of password change for $uname: pwchange_success";
                 if ($lonhost) {                  if ($lonhost) {
                     $msg .= " - request originated from: $lonhost";                      $msg .= " - request originated from: $lonhost";
                 }                  }
                 &logthis($msg);                  &logthis($msg);
                 &update_passwd_history($uname,$udom,$howpwd,$context);  
  &Reply($client, "ok\n", $userinput);   &Reply($client, "ok\n", $userinput);
     } else {      } else {
  &logthis("Unable to open $uname passwd "                  &logthis("Unable to open $uname passwd "               
Line 2199  sub change_password_handler { Line 2005  sub change_password_handler {
     }      }
  } elsif ($howpwd eq 'unix' && $context ne 'reset_by_email') {   } elsif ($howpwd eq 'unix' && $context ne 'reset_by_email') {
     my $result = &change_unix_password($uname, $npass);      my $result = &change_unix_password($uname, $npass);
             if ($result eq 'ok') {  
                 &update_passwd_history($uname,$udom,$howpwd,$context);  
             }  
     &logthis("Result of password change for $uname: ".      &logthis("Result of password change for $uname: ".
      $result);       $result);
     &Reply($client, \$result, $userinput);      &Reply($client, \$result, $userinput);
Line 2212  sub change_password_handler { Line 2015  sub change_password_handler {
     #      #
     &Failure( $client, "auth_mode_error\n", $userinput);      &Failure( $client, "auth_mode_error\n", $userinput);
  }     }  
   
     } else {      } else {
  if ($failure eq '') {   if ($failure eq '') {
     $failure = 'non_authorized';      $failure = 'non_authorized';
Line 2223  sub change_password_handler { Line 2027  sub change_password_handler {
 }  }
 &register_handler("passwd", \&change_password_handler, 1, 1, 0);  &register_handler("passwd", \&change_password_handler, 1, 1, 0);
   
 sub hash_passwd {  
     my ($domain,$plainpass,@rest) = @_;  
     my ($salt,$cost);  
     if (@rest) {  
         $cost = $rest[0];  
         # salt is first 22 characters, base-64 encoded by bcrypt  
         my $plainsalt = substr($rest[1],0,22);  
         $salt = Crypt::Eksblowfish::Bcrypt::de_base64($plainsalt);  
     } else {  
         my %domdefaults = &Apache::lonnet::get_domain_defaults($domain);  
         my $defaultcost = $domdefaults{'intauth_cost'};  
         if (($defaultcost eq '') || ($defaultcost =~ /D/)) {  
             $cost = 10;  
         } else {  
             $cost = $defaultcost;  
         }  
         # Generate random 16-octet base64 salt  
         $salt = "";  
         $salt .= pack("C", int rand(256)) for 1..16;  
     }  
     my $hash = &Crypt::Eksblowfish::Bcrypt::bcrypt_hash({  
         key_nul => 1,  
         cost    => $cost,  
         salt    => $salt,  
     }, Digest::SHA::sha512(Encode::encode('UTF-8',$plainpass)));  
   
     my $result = join("!", "", "bcrypt", sprintf("%02d",$cost),  
                 &Crypt::Eksblowfish::Bcrypt::en_base64($salt).  
                 &Crypt::Eksblowfish::Bcrypt::en_base64($hash));  
     return $result;  
 }  
   
 #  #
 #   Create a new user.  User in this case means a lon-capa user.  #   Create a new user.  User in this case means a lon-capa user.
 #   The user must either already exist in some authentication realm  #   The user must either already exist in some authentication realm
Line 2298  sub add_user_handler { Line 2070  sub add_user_handler {
     ."makeuser";      ."makeuser";
     }      }
     unless ($fperror) {      unless ($fperror) {
  my $result=&make_passwd_file($uname,$udom,$umode,$npass,   my $result=&make_passwd_file($uname,$udom,$umode,$npass, $passfilename);
                                              $passfilename,'makeuser');  
  &Reply($client,\$result, $userinput);     #BUGBUG - could be fail   &Reply($client,\$result, $userinput);     #BUGBUG - could be fail
     } else {      } else {
  &Failure($client, \$fperror, $userinput);   &Failure($client, \$fperror, $userinput);
Line 2360  sub change_authentication_handler { Line 2131  sub change_authentication_handler {
  my $passfilename = &password_path($udom, $uname);   my $passfilename = &password_path($udom, $uname);
  if ($passfilename) { # Not allowed to create a new user!!   if ($passfilename) { # Not allowed to create a new user!!
     # If just changing the unix passwd. need to arrange to run      # If just changing the unix passwd. need to arrange to run
     # passwd since otherwise make_passwd_file will fail as       # passwd since otherwise make_passwd_file will run
     # creation of unix authenticated users is no longer supported      # lcuseradd which fails if an account already exists
             # except from the command line, when running make_domain_coordinator.pl      # (to prevent an unscrupulous LONCAPA admin from stealing
       # an existing account by overwriting it as a LonCAPA account).
   
     if(($oldauth =~/^unix/) && ($umode eq "unix")) {      if(($oldauth =~/^unix/) && ($umode eq "unix")) {
  my $result = &change_unix_password($uname, $npass);   my $result = &change_unix_password($uname, $npass);
  &logthis("Result of password change for $uname: ".$result);   &logthis("Result of password change for $uname: ".$result);
  if ($result eq "ok") {   if ($result eq "ok") {
                     &update_passwd_history($uname,$udom,$umode,'changeuserauth');  
     &Reply($client, \$result);      &Reply($client, \$result);
  } else {   } else {
     &Failure($client, \$result);      &Failure($client, \$result);
  }   }
     } else {      } else {
  my $result=&make_passwd_file($uname,$udom,$umode,$npass,   my $result=&make_passwd_file($uname,$udom,$umode,$npass,$passfilename);
                                              $passfilename,'changeuserauth');  
  #   #
  #  If the current auth mode is internal, and the old auth mode was   #  If the current auth mode is internal, and the old auth mode was
  #  unix, or krb*,  and the user is an author for this domain,   #  unix, or krb*,  and the user is an author for this domain,
  #  re-run manage_permissions for that role in order to be able   #  re-run manage_permissions for that role in order to be able
  #  to take ownership of the construction space back to www:www   #  to take ownership of the construction space back to www:www
  #   #
   
   
    if( (($oldauth =~ /^unix/) && ($umode eq "internal")) ||
       (($oldauth =~ /^internal/) && ($umode eq "unix")) ) { 
       if(&is_author($udom, $uname)) {
    &Debug(" Need to manage author permissions...");
    &manage_permissions("/$udom/_au", $udom, $uname, "$umode:");
       }
    }
  &Reply($client, \$result, $userinput);   &Reply($client, \$result, $userinput);
     }      }
                 
Line 2396  sub change_authentication_handler { Line 2173  sub change_authentication_handler {
 }  }
 &register_handler("changeuserauth", \&change_authentication_handler, 1,1, 0);  &register_handler("changeuserauth", \&change_authentication_handler, 1,1, 0);
   
 sub update_passwd_history {  
     my ($uname,$udom,$umode,$context) = @_;  
     my $proname=&propath($udom,$uname);  
     my $now = time;  
     if (open(my $fh,">>$proname/passwd.log")) {  
         print $fh "$now:$umode:$context\n";  
         close($fh);  
     }  
     return;  
 }  
   
 #  #
 #   Determines if this is the home server for a user.  The home server  #   Determines if this is the home server for a user.  The home server
 #   for a user will have his/her lon-capa passwd file.  Therefore all we need  #   for a user will have his/her lon-capa passwd file.  Therefore all we need
Line 2499  sub update_resource_handler { Line 2265  sub update_resource_handler {
  }   }
  alarm(0);   alarm(0);
  if ($response->is_error()) {   if ($response->is_error()) {
                     my $reply=&Apache::lonnet::reply("unsub:$fname","$clientname");  # FIXME: we should probably clean up here instead of just whine
                     &devalidate_meta_cache($fname);      unlink($transname);
                     if (-e $transname) {  
                         unlink($transname);  
                     }  
                     unlink($fname);  
     my $message=$response->status_line;      my $message=$response->status_line;
     &logthis("LWP GET: $message for $fname ($remoteurl)");      &logthis("LWP GET: $message for $fname ($remoteurl)");
  } else {   } else {
Line 2662  sub remove_user_file_handler { Line 2424  sub remove_user_file_handler {
     if (-e $file) {      if (-e $file) {
  #   #
  #   If the file is a regular file unlink is fine...   #   If the file is a regular file unlink is fine...
  #   However it's possible the client wants a dir   #   However it's possible the client wants a dir.
  #   removed, in which case rmdir is more appropriate   #   removed, in which case rmdir is more approprate:
         #   Note: rmdir will only remove an empty directory.  
  #   #
         if (-f $file){          if (-f $file){
     unlink($file);      unlink($file);
                     # for html files remove the associated .bak file  
                     # which may have been created by the editor.  
                     if ($ufile =~ m{^((docs|supplemental)/(?:\d+|default)/\d+(?:|/.+)/)[^/]+\.x?html?$}i) {  
                         my $path = $1;  
                         if (-e $file.'.bak') {  
                             unlink($file.'.bak');  
                         }  
                     }  
  } elsif(-d $file) {   } elsif(-d $file) {
     rmdir($file);      rmdir($file);
  }   }
Line 3038  sub newput_user_profile_entry { Line 2791  sub newput_user_profile_entry {
     foreach my $pair (@pairs) {      foreach my $pair (@pairs) {
  my ($key,$value)=split(/=/,$pair);   my ($key,$value)=split(/=/,$pair);
  if (exists($hashref->{$key})) {   if (exists($hashref->{$key})) {
             if (!&untie_user_hash($hashref)) {  
                 &logthis("error: ".($!+0)." untie (GDBM) failed ".  
                          "while attempting newput - early out as key exists");  
             }  
     &Failure($client, "key_exists: ".$key."\n",$userinput);      &Failure($client, "key_exists: ".$key."\n",$userinput);
     return 1;      return 1;
  }   }
Line 3293  sub get_profile_entry { Line 3042  sub get_profile_entry {
 #  #
 #  Parameters:  #  Parameters:
 #     $cmd               - Command keyword of request (eget).  #     $cmd               - Command keyword of request (eget).
 #     $tail              - Tail of the command.  See GetProfileEntry  #     $tail              - Tail of the command.  See GetProfileEntry #                          for more information about this.
 #                          for more information about this.  
 #     $client            - File open on the client.  #     $client            - File open on the client.
 #  Returns:  #  Returns:
 #     1      - Continue processing  #     1      - Continue processing
Line 3446  sub get_profile_keys { Line 3194  sub get_profile_keys {
 sub dump_profile_database {  sub dump_profile_database {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
   
       my $res = LONCAPA::Lond::dump_profile_database($tail);
   
       if ($res =~ /^error:/) {
           Failure($client, \$res, "$cmd:$tail");
       } else {
           Reply($client, \$res, "$cmd:$tail");
       }
   
       return 1;  
   
       #TODO remove 
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
         
     my ($udom,$uname,$namespace) = split(/:/,$tail);      my ($udom,$uname,$namespace) = split(/:/,$tail);
Line 3525  sub dump_with_regexp { Line 3284  sub dump_with_regexp {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
   
     my $res = LONCAPA::Lond::dump_with_regexp($tail, $clientversion);      my $res = LONCAPA::Lond::dump_with_regexp($tail, $clientversion);
       
     if ($res =~ /^error:/) {      if ($res =~ /^error:/) {
         &Failure($client, \$res, "$cmd:$tail");          Failure($client, \$res, "$cmd:$tail");
     } else {      } else {
         &Reply($client, \$res, "$cmd:$tail");          Reply($client, \$res, "$cmd:$tail");
     }      }
   
     return 1;      return 1;
Line 3546  sub dump_with_regexp { Line 3305  sub dump_with_regexp {
 #                          namespace   - Name of the database being modified  #                          namespace   - Name of the database being modified
 #                          rid         - Resource keyword to modify.  #                          rid         - Resource keyword to modify.
 #                          what        - new value associated with rid.  #                          what        - new value associated with rid.
 #                          laststore   - (optional) version=timestamp  
 #                                        for most recent transaction for rid  
 #                                        in namespace, when cstore was called  
 #  #
 #    $client             - Socket open on the client.  #    $client             - Socket open on the client.
 #  #
Line 3557  sub dump_with_regexp { Line 3313  sub dump_with_regexp {
 #      1 (keep on processing).  #      1 (keep on processing).
 #  Side-Effects:  #  Side-Effects:
 #    Writes to the client  #    Writes to the client
 #    Successful storage will cause either 'ok', or, if $laststore was included  
 #    in the tail of the request, and the version number for the last transaction  
 #    is larger than the version in $laststore, delay:$numtrans , where $numtrans  
 #    is the number of store evevnts recorded for rid in namespace since  
 #    lonnet::store() was called by the client.  
 #  
 sub store_handler {  sub store_handler {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
     
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
   
     chomp($tail);      my ($udom,$uname,$namespace,$rid,$what) =split(/:/,$tail);
     my ($udom,$uname,$namespace,$rid,$what,$laststore) =split(/:/,$tail);  
     if ($namespace ne 'roles') {      if ($namespace ne 'roles') {
   
    chomp($what);
  my @pairs=split(/\&/,$what);   my @pairs=split(/\&/,$what);
  my $hashref  = &tie_user_hash($udom, $uname, $namespace,   my $hashref  = &tie_user_hash($udom, $uname, $namespace,
        &GDBM_WRCREAT(), "S",         &GDBM_WRCREAT(), "S",
        "$rid:$what");         "$rid:$what");
  if ($hashref) {   if ($hashref) {
     my $now = time;      my $now = time;
             my $numtrans;      my @previouskeys=split(/&/,$hashref->{"keys:$rid"});
             if ($laststore) {      my $key;
                 my ($previousversion,$previoustime) = split(/\=/,$laststore);  
                 my ($lastversion,$lasttime) = (0,0);  
                 $lastversion = $hashref->{"version:$rid"};  
                 if ($lastversion) {  
                     $lasttime = $hashref->{"$lastversion:$rid:timestamp"};  
                 }  
                 if (($previousversion) && ($previousversion !~ /\D/)) {  
                     if (($lastversion > $previousversion) && ($lasttime >= $previoustime)) {  
                         $numtrans = $lastversion - $previousversion;  
                     }  
                 } elsif ($lastversion) {  
                     $numtrans = $lastversion;  
                 }  
                 if ($numtrans) {  
                     $numtrans =~ s/D//g;  
                 }  
             }  
   
     $hashref->{"version:$rid"}++;      $hashref->{"version:$rid"}++;
     my $version=$hashref->{"version:$rid"};      my $version=$hashref->{"version:$rid"};
     my $allkeys='';       my $allkeys=''; 
Line 3610  sub store_handler { Line 3342  sub store_handler {
     $allkeys.='timestamp';      $allkeys.='timestamp';
     $hashref->{"$version:keys:$rid"}=$allkeys;      $hashref->{"$version:keys:$rid"}=$allkeys;
     if (&untie_user_hash($hashref)) {      if (&untie_user_hash($hashref)) {
                 my $msg = 'ok';   &Reply($client, "ok\n", $userinput);
                 if ($numtrans) {  
                     $msg = 'delay:'.$numtrans;  
                 }  
                 &Reply($client, "$msg\n", $userinput);  
     } else {      } else {
  &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".   &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
  "while attempting store\n", $userinput);   "while attempting store\n", $userinput);
Line 3876  sub send_query_handler { Line 3604  sub send_query_handler {
   
     my ($query,$arg1,$arg2,$arg3)=split(/\:/,$tail);      my ($query,$arg1,$arg2,$arg3)=split(/\:/,$tail);
     $query=~s/\n*$//g;      $query=~s/\n*$//g;
     if (($query eq 'usersearch') || ($query eq 'instdirsearch')) {  
         my $usersearchconf = &get_usersearch_config($currentdomainid,'directorysrch');  
         my $earlyout;  
         if (ref($usersearchconf) eq 'HASH') {  
             if ($currentdomainid eq $clienthomedom) {  
                 if ($query eq 'usersearch') {  
                     if ($usersearchconf->{'lcavailable'} eq '0') {  
                         $earlyout = 1;  
                     }  
                 } else {  
                     if ($usersearchconf->{'available'} eq '0') {  
                         $earlyout = 1;  
                     }  
                 }  
             } else {  
                 if ($query eq 'usersearch') {  
                     if ($usersearchconf->{'lclocalonly'}) {  
                         $earlyout = 1;  
                     }  
                 } else {  
                     if ($usersearchconf->{'localonly'}) {  
                         $earlyout = 1;  
                     }  
                 }  
             }  
         }  
         if ($earlyout) {  
             &Reply($client, "query_not_authorized\n");  
             return 1;  
         }  
     }  
     &Reply($client, "". &sql_reply("$clientname\&$query".      &Reply($client, "". &sql_reply("$clientname\&$query".
  "\&$arg1"."\&$arg2"."\&$arg3")."\n",   "\&$arg1"."\&$arg2"."\&$arg3")."\n",
   $userinput);    $userinput);
Line 4161  sub put_course_id_hash_handler { Line 3858  sub put_course_id_hash_handler {
 #                 creationcontext - include courses created in specified context   #                 creationcontext - include courses created in specified context 
 #  #
 #                 domcloner - flag to indicate if user can create CCs in course's domain.  #                 domcloner - flag to indicate if user can create CCs in course's domain.
 #                             If so, ability to clone course is automatic.  #                             If so, ability to clone course is automatic. 
 #                 hasuniquecode - filter by courses for which a six character unique code has  
 #                                 been set.  
 #  #
 #     $client  - The socket open on the client.  #     $client  - The socket open on the client.
 # Returns:  # Returns:
Line 4172  sub put_course_id_hash_handler { Line 3867  sub put_course_id_hash_handler {
 #   a reply is written to $client.  #   a reply is written to $client.
 sub dump_course_id_handler {  sub dump_course_id_handler {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
   
       my $res = LONCAPA::Lond::dump_course_id_handler($tail);
       if ($res =~ /^error:/) {
           Failure($client, \$res, "$cmd:$tail");
       } else {
           Reply($client, \$res, "$cmd:$tail");
       }
   
       return 1;  
   
       #TODO remove
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
   
     my ($udom,$since,$description,$instcodefilter,$ownerfilter,$coursefilter,      my ($udom,$since,$description,$instcodefilter,$ownerfilter,$coursefilter,
         $typefilter,$regexp_ok,$rtn_as_hash,$selfenrollonly,$catfilter,$showhidden,          $typefilter,$regexp_ok,$rtn_as_hash,$selfenrollonly,$catfilter,$showhidden,
         $caller,$cloner,$cc_clone_list,$cloneonly,$createdbefore,$createdafter,          $caller,$cloner,$cc_clone_list,$cloneonly,$createdbefore,$createdafter,
         $creationcontext,$domcloner,$hasuniquecode) =split(/:/,$tail);          $creationcontext,$domcloner) =split(/:/,$tail);
     my $now = time;      my $now = time;
     my ($cloneruname,$clonerudom,%cc_clone);      my ($cloneruname,$clonerudom,%cc_clone);
     if (defined($description)) {      if (defined($description)) {
Line 4250  sub dump_course_id_handler { Line 3956  sub dump_course_id_handler {
     } else {      } else {
         $creationcontext = '.';          $creationcontext = '.';
     }      }
     unless ($hasuniquecode) {  
         $hasuniquecode = '.';  
     }  
     my $unpack = 1;      my $unpack = 1;
     if ($description eq '.' && $instcodefilter eq '.' && $ownerfilter eq '.' &&       if ($description eq '.' && $instcodefilter eq '.' && $ownerfilter eq '.' && 
         $typefilter eq '.') {          $typefilter eq '.') {
Line 4341  sub dump_course_id_handler { Line 4044  sub dump_course_id_handler {
                 $selfenroll_end = $items->{'selfenroll_end_date'};                  $selfenroll_end = $items->{'selfenroll_end_date'};
                 $created = $items->{'created'};                  $created = $items->{'created'};
                 $context = $items->{'context'};                  $context = $items->{'context'};
                 if ($hasuniquecode ne '.') {  
                     next unless ($items->{'uniquecode'});  
                 }  
                 if ($selfenrollonly) {                  if ($selfenrollonly) {
                     next if (!$selfenroll_types);                      next if (!$selfenroll_types);
                     if (($selfenroll_end > 0) && ($selfenroll_end <= $now)) {                      if (($selfenroll_end > 0) && ($selfenroll_end <= $now)) {
Line 4576  sub course_lastaccess_handler { Line 4276  sub course_lastaccess_handler {
 }  }
 &register_handler("courselastaccess",\&course_lastaccess_handler, 0, 1, 0);  &register_handler("courselastaccess",\&course_lastaccess_handler, 0, 1, 0);
   
 sub course_sessions_handler {  
     my ($cmd, $tail, $client) = @_;  
     my $userinput = "$cmd:$tail";  
     my ($cdom,$cnum,$lastactivity) = split(':',$tail);  
     my $dbsuffix = '_'.$cdom.'_'.$cnum.'.db';  
     my (%sessions,$qresult);  
     my $now=time;  
     if (opendir(DIR,$perlvar{'lonIDsDir'})) {  
         my $filename;  
         while ($filename=readdir(DIR)) {  
             next if ($filename=~/^\./);  
             next if ($filename=~/^publicuser_/);  
             next if ($filename=~/^[a-f0-9]+_(linked|lti_\d+)\.id$/);  
             if ($filename =~ /^($LONCAPA::match_username)_\d+_($LONCAPA::match_domain)_/) {  
                 my ($uname,$udom) = ($1,$2);  
                 next unless (-e "$perlvar{'lonDaemons'}/tmp/$uname$dbsuffix");  
                 my $mtime = (stat("$perlvar{'lonIDsDir'}/$filename"))[9];  
                 if ($lastactivity < 0) {  
                     next if ($mtime-$now > $lastactivity);  
                 } else {  
                     next if ($now-$mtime > $lastactivity);  
                 }  
                 $sessions{$uname.':'.$udom} = $mtime;  
             }  
         }  
         closedir(DIR);  
     }  
     foreach my $user (keys(%sessions)) {  
         $qresult.=&escape($user).'='.$sessions{$user}.'&';  
     }  
     if ($qresult) {  
         chop($qresult);  
     }  
     &Reply($client, \$qresult, $userinput);  
     return 1;  
 }  
 &register_handler("coursesessions",\&course_sessions_handler, 0, 1, 0);  
   
 #  #
 # Puts an unencrypted entry in a namespace db file at the domain level   # Puts an unencrypted entry in a namespace db file at the domain level 
 #  #
Line 4662  sub put_domain_handler { Line 4324  sub put_domain_handler {
 # domain directory.  # domain directory.
 #  #
 # Parameters:  # Parameters:
 #   $cmd             - Command request keyword (getdom).  #   $cmd             - Command request keyword (get).
 #   $tail            - Tail of the command.  This is a colon separated list  #   $tail            - Tail of the command.  This is a colon separated list
 #                      consisting of the domain and the 'namespace'   #                      consisting of the domain and the 'namespace' 
 #                      which selects the gdbm file to do the lookup in,  #                      which selects the gdbm file to do the lookup in,
Line 4679  sub put_domain_handler { Line 4341  sub put_domain_handler {
 sub get_domain_handler {  sub get_domain_handler {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
   
     my $userinput = "$cmd:$tail";  
       my $userinput = "$client:$tail";
   
     my ($udom,$namespace,$what)=split(/:/,$tail,3);      my ($udom,$namespace,$what)=split(/:/,$tail,3);
     my $res = LONCAPA::Lond::get_dom($userinput);      chomp($what);
     if ($res =~ /^error:/) {      my @queries=split(/\&/,$what);
         &Failure($client, \$res, $userinput);      my $qresult='';
       my $hashref = &tie_domain_hash($udom, "$namespace", &GDBM_READER());
       if ($hashref) {
           for (my $i=0;$i<=$#queries;$i++) {
               $qresult.="$hashref->{$queries[$i]}&";
           }
           if (&untie_domain_hash($hashref)) {
               $qresult=~s/\&$//;
               &Reply($client, \$qresult, $userinput);
           } else {
               &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
                         "while attempting getdom\n",$userinput);
           }
     } else {      } else {
         &Reply($client, \$res, $userinput);          &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
                    "while attempting getdom\n",$userinput);
     }      }
   
     return 1;      return 1;
Line 4802  sub get_id_handler { Line 4478  sub get_id_handler {
 # Returns:  # Returns:
 #     1   - Continue processing  #     1   - Continue processing
 #     0   - Exit server.  #     0   - Exit server.
 #  #     
 #  #
   
 sub del_id_handler {  sub del_id_handler {
Line 5209  sub tmp_del_handler { Line 4885  sub tmp_del_handler {
 &register_handler("tmpdel", \&tmp_del_handler, 0, 1, 0);  &register_handler("tmpdel", \&tmp_del_handler, 0, 1, 0);
   
 #  #
 #  Process the updatebalcookie command.  This command updates a  
 #  cookie in the lonBalancedir directory on a load balancer node.  
 #  
 # Parameters:  
 #   $cmd      - Command that got us here.  
 #   $tail     - Tail of the request (escaped cookie: escaped current entry)  
 #  
 #   $client   - socket open on the client process.  
 #  
 # Returns:  
 #   1     - Indicating processing should continue.  
 # Side Effects:  
 #   A cookie file is updated from the lonBalancedir directory  
 #   A reply is sent to the client.  
 #  
 sub update_balcookie_handler {  
     my ($cmd, $tail, $client) = @_;  
   
     my $userinput= "$cmd:$tail";  
     chomp($tail);  
     my ($cookie,$lastentry) = map { &unescape($_) } (split(/:/,$tail));  
   
     my $updatedone;  
     if ($cookie =~ /^$LONCAPA::match_domain\_$LONCAPA::match_username\_[a-f0-9]{32}$/) {  
         my $execdir=$perlvar{'lonBalanceDir'};  
         if (-e "$execdir/$cookie.id") {  
             my $doupdate;  
             if (open(my $fh,'<',"$execdir/$cookie.id")) {  
                 while (my $line = <$fh>) {  
                     chomp($line);  
                     if ($line eq $lastentry) {  
                         $doupdate = 1;  
                         last;  
                     }  
                 }  
                 close($fh);  
             }  
             if ($doupdate) {  
                 if (open(my $fh,'>',"$execdir/$cookie.id")) {  
                     print $fh $clientname;  
                     close($fh);  
                     $updatedone = 1;  
                 }  
             }  
         }  
     }  
     if ($updatedone) {  
         &Reply($client, "ok\n", $userinput);  
     } else {  
         &Failure( $client, "error: ".($!+0)."file update failed ".  
                   "while attempting updatebalcookie\n", $userinput);  
     }  
     return 1;  
 }  
 &register_handler("updatebalcookie", \&update_balcookie_handler, 0, 1, 0);  
   
 #  
 #  Process the delbalcookie command. This command deletes a balancer  
 #  cookie in the lonBalancedir directory on a load balancer node.  
 #  
 # Parameters:  
 #   $cmd      - Command that got us here.  
 #   $cookie   - Cookie to be deleted.  
 #   $client   - socket open on the client process.  
 #  
 # Returns:  
 #   1     - Indicating processing should continue.  
 # Side Effects:  
 #   A cookie file is deleted from the lonBalancedir directory  
 #   A reply is sent to the client.  
 sub del_balcookie_handler {  
     my ($cmd, $cookie, $client) = @_;  
   
     my $userinput= "$cmd:$cookie";  
   
     chomp($cookie);  
     $cookie = &unescape($cookie);  
     my $deleted = '';  
     if ($cookie =~ /^$LONCAPA::match_domain\_$LONCAPA::match_username\_[a-f0-9]{32}$/) {  
         my $execdir=$perlvar{'lonBalanceDir'};  
         if (-e "$execdir/$cookie.id") {  
             if (open(my $fh,'<',"$execdir/$cookie.id")) {  
                 my $dodelete;  
                 while (my $line = <$fh>) {  
                     chomp($line);  
                     if ($line eq $clientname) {  
                         $dodelete = 1;  
                         last;  
                     }  
                 }  
                 close($fh);  
                 if ($dodelete) {  
                     if (unlink("$execdir/$cookie.id")) {  
                         $deleted = 1;  
                     }  
                 }  
             }  
         }  
     }  
     if ($deleted) {  
         &Reply($client, "ok\n", $userinput);  
     } else {  
         &Failure( $client, "error: ".($!+0)."Unlinking cookie file Failed ".  
                   "while attempting delbalcookie\n", $userinput);  
     }  
     return 1;  
 }  
 &register_handler("delbalcookie", \&del_balcookie_handler, 0, 1, 0);  
   
 #  
 #   Processes the setannounce command.  This command  #   Processes the setannounce command.  This command
 #   creates a file named announce.txt in the top directory of  #   creates a file named announce.txt in the top directory of
 #   the documentn root and sets its contents.  The announce.txt file is  #   the documentn root and sets its contents.  The announce.txt file is
Line 5597  sub validate_course_section_handler { Line 5163  sub validate_course_section_handler {
 # Formal Parameters:  # Formal Parameters:
 #    $cmd     - The command request that got us dispatched.  #    $cmd     - The command request that got us dispatched.
 #    $tail    - The tail of the command.   In this case this is a colon separated  #    $tail    - The tail of the command.   In this case this is a colon separated
 #               set of values that will be split into:  #               set of words that will be split into:
 #               $inst_class  - Institutional code for the specific class section     #               $inst_class  - Institutional code for the specific class section   
 #               $ownerlist   - An escaped comma-separated list of username:domain  #               $courseowner - The escaped username:domain of the course owner 
 #                              of the course owner, and co-owner(s).  
 #               $cdom        - The domain of the course from the institution's  #               $cdom        - The domain of the course from the institution's
 #                              point of view.  #                              point of view.
 #    $client  - The socket open on the client.  #    $client  - The socket open on the client.
Line 5625  sub validate_class_access_handler { Line 5190  sub validate_class_access_handler {
 &register_handler("autovalidateclass_sec", \&validate_class_access_handler, 0, 1, 0);  &register_handler("autovalidateclass_sec", \&validate_class_access_handler, 0, 1, 0);
   
 #  #
 #   Validate course owner or co-owners(s) access to enrollment data for all sections  
 #   and crosslistings for a particular course.  
 #  
 #  
 # Formal Parameters:  
 #    $cmd     - The command request that got us dispatched.  
 #    $tail    - The tail of the command.   In this case this is a colon separated  
 #               set of values that will be split into:  
 #               $ownerlist   - An escaped comma-separated list of username:domain  
 #                              of the course owner, and co-owner(s).  
 #               $cdom        - The domain of the course from the institution's  
 #                              point of view.  
 #               $classes     - Frozen hash of institutional course sections and  
 #                              crosslistings.  
 #    $client  - The socket open on the client.  
 # Returns:  
 #    1 - continue processing.  
 #  
   
 sub validate_classes_handler {  
     my ($cmd, $tail, $client) = @_;  
     my $userinput = "$cmd:$tail";  
     my ($ownerlist,$cdom,$classes) = split(/:/, $tail);  
     my $classesref = &Apache::lonnet::thaw_unescape($classes);  
     my $owners = &unescape($ownerlist);  
     my $result;  
     eval {  
         local($SIG{__DIE__})='DEFAULT';  
         my %validations;  
         my $response = &localenroll::check_instclasses($owners,$cdom,$classesref,  
                                                        \%validations);  
         if ($response eq 'ok') {  
             foreach my $key (keys(%validations)) {  
                 $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($validations{$key}).'&';  
             }  
             $result =~ s/\&$//;  
         } else {  
             $result = 'error';  
         }  
     };  
     if (!$@) {  
         &Reply($client, \$result, $userinput);  
     } else {  
         &Failure($client,"unknown_cmd\n",$userinput);  
     }  
     return 1;  
 }  
 &register_handler("autovalidateinstclasses", \&validate_classes_handler, 0, 1, 0);  
   
 #  
 #   Create a password for a new LON-CAPA user added by auto-enrollment.  #   Create a password for a new LON-CAPA user added by auto-enrollment.
 #   Only used for case where authentication method for new user is localauth  #   Only used for case where authentication method for new user is localauth
 #  #
Line 5709  sub create_auto_enroll_password_handler Line 5224  sub create_auto_enroll_password_handler
 &register_handler("autocreatepassword", \&create_auto_enroll_password_handler,   &register_handler("autocreatepassword", \&create_auto_enroll_password_handler, 
   0, 1, 0);    0, 1, 0);
   
 sub auto_export_grades_handler {  
     my ($cmd, $tail, $client) = @_;  
     my $userinput = "$cmd:$tail";  
     my ($cdom,$cnum,$info,$data) = split(/:/,$tail);  
     my $inforef = &Apache::lonnet::thaw_unescape($info);  
     my $dataref = &Apache::lonnet::thaw_unescape($data);  
     my ($outcome,$result);;  
     eval {  
         local($SIG{__DIE__})='DEFAULT';  
         my %rtnhash;  
         $outcome=&localenroll::export_grades($cdom,$cnum,$inforef,$dataref,\%rtnhash);  
         if ($outcome eq 'ok') {  
             foreach my $key (keys(%rtnhash)) {  
                 $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rtnhash{$key}).'&';  
             }  
             $result =~ s/\&$//;  
         }  
     };  
     if (!$@) {  
         if ($outcome eq 'ok') {  
             if ($cipher) {  
                 my $cmdlength=length($result);  
                 $result.="         ";  
                 my $encresult='';  
                 for (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {  
                     $encresult.= unpack("H16",  
                                         $cipher->encrypt(substr($result,  
                                                                 $encidx,  
                                                                 8)));  
                 }  
                 &Reply( $client, "enc:$cmdlength:$encresult\n", $userinput);  
             } else {  
                 &Failure( $client, "error:no_key\n", $userinput);  
             }  
         } else {  
             &Reply($client, "$outcome\n", $userinput);  
         }  
     } else {  
         &Failure($client,"export_error\n",$userinput);  
     }  
     return 1;  
 }  
 &register_handler("autoexportgrades", \&auto_export_grades_handler,  
                   1, 1, 0);  
   
   
 #   Retrieve and remove temporary files created by/during autoenrollment.  #   Retrieve and remove temporary files created by/during autoenrollment.
 #  #
 # Formal Parameters:  # Formal Parameters:
 #    $cmd      - The command that got us dispatched.  #    $cmd      - The command that got us dispatched.
 #    $tail     - The tail of the command.  In our case this is a colon   #    $tail     - The tail of the command.  In our case this is a colon 
 #                separated list that will be split into:  #                separated list that will be split into:
 #                $filename - The name of the file to retrieve.  #                $filename - The name of the file to remove.
 #                            The filename is given as a path relative to  #                            The filename is given as a path relative to
 #                            the LonCAPA temp file directory.  #                            the LonCAPA temp file directory.
 #    $client   - Socket open on the client.  #    $client   - Socket open on the client.
Line 5775  sub retrieve_auto_file_handler { Line 5244  sub retrieve_auto_file_handler {
     my ($filename)   = split(/:/, $tail);      my ($filename)   = split(/:/, $tail);
   
     my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename;      my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename;
     if ($filename =~m{/\.\./}) {      if ( (-e $source) && ($filename ne '') ) {
         &Failure($client, "refused\n", $userinput);  
     } elsif ($filename !~ /^$LONCAPA::match_domain\_$LONCAPA::match_courseid\_.+_classlist\.xml$/) {  
         &Failure($client, "refused\n", $userinput);  
     } elsif ( (-e $source) && ($filename ne '') ) {  
  my $reply = '';   my $reply = '';
  if (open(my $fh,$source)) {   if (open(my $fh,$source)) {
     while (<$fh>) {      while (<$fh>) {
Line 5811  sub crsreq_checks_handler { Line 5276  sub crsreq_checks_handler {
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
     my $dom = $tail;      my $dom = $tail;
     my $result;      my $result;
     my @reqtypes = ('official','unofficial','community','textbook');      my @reqtypes = ('official','unofficial','community');
     eval {      eval {
         local($SIG{__DIE__})='DEFAULT';          local($SIG{__DIE__})='DEFAULT';
         my %validations;          my %validations;
Line 5838  sub crsreq_checks_handler { Line 5303  sub crsreq_checks_handler {
 sub validate_crsreq_handler {  sub validate_crsreq_handler {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
     my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist,$customdata) = split(/:/, $tail);      my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist) = split(/:/, $tail);
     $instcode = &unescape($instcode);      $instcode = &unescape($instcode);
     $owner = &unescape($owner);      $owner = &unescape($owner);
     $crstype = &unescape($crstype);      $crstype = &unescape($crstype);
     $inststatuslist = &unescape($inststatuslist);      $inststatuslist = &unescape($inststatuslist);
     $instcode = &unescape($instcode);      $instcode = &unescape($instcode);
     $instseclist = &unescape($instseclist);      $instseclist = &unescape($instseclist);
     my $custominfo = &Apache::lonnet::thaw_unescape($customdata);  
     my $outcome;      my $outcome;
     eval {      eval {
         local($SIG{__DIE__})='DEFAULT';          local($SIG{__DIE__})='DEFAULT';
         $outcome = &localenroll::validate_crsreq($dom,$owner,$crstype,          $outcome = &localenroll::validate_crsreq($dom,$owner,$crstype,
                                                  $inststatuslist,$instcode,                                                   $inststatuslist,$instcode,
                                                  $instseclist,$custominfo);                                                   $instseclist);
     };      };
     if (!$@) {      if (!$@) {
         &Reply($client, \$outcome, $userinput);          &Reply($client, \$outcome, $userinput);
Line 5862  sub validate_crsreq_handler { Line 5326  sub validate_crsreq_handler {
 }  }
 &register_handler("autocrsreqvalidation", \&validate_crsreq_handler, 0, 1, 0);  &register_handler("autocrsreqvalidation", \&validate_crsreq_handler, 0, 1, 0);
   
 sub crsreq_update_handler {  
     my ($cmd, $tail, $client) = @_;  
     my $userinput = "$cmd:$tail";  
     my ($cdom,$cnum,$crstype,$action,$ownername,$ownerdomain,$fullname,$title,$code,  
         $accessstart,$accessend,$infohashref) =  
         split(/:/, $tail);  
     $crstype = &unescape($crstype);  
     $action = &unescape($action);  
     $ownername = &unescape($ownername);  
     $ownerdomain = &unescape($ownerdomain);  
     $fullname = &unescape($fullname);  
     $title = &unescape($title);  
     $code = &unescape($code);  
     $accessstart = &unescape($accessstart);  
     $accessend = &unescape($accessend);  
     my $incoming = &Apache::lonnet::thaw_unescape($infohashref);  
     my ($result,$outcome);  
     eval {  
         local($SIG{__DIE__})='DEFAULT';  
         my %rtnhash;  
         $outcome = &localenroll::crsreq_updates($cdom,$cnum,$crstype,$action,  
                                                 $ownername,$ownerdomain,$fullname,  
                                                 $title,$code,$accessstart,$accessend,  
                                                 $incoming,\%rtnhash);  
         if ($outcome eq 'ok') {  
             my @posskeys = qw(createdweb createdmsg createdcustomized createdactions queuedweb queuedmsg formitems reviewweb validationjs onload javascript);  
             foreach my $key (keys(%rtnhash)) {  
                 if (grep(/^\Q$key\E/,@posskeys)) {  
                     $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rtnhash{$key}).'&';  
                 }  
             }  
             $result =~ s/\&$//;  
         }  
     };  
     if (!$@) {  
         if ($outcome eq 'ok') {  
             &Reply($client, \$result, $userinput);  
         } else {  
             &Reply($client, "format_error\n", $userinput);  
         }  
     } else {  
         &Failure($client,"unknown_cmd\n",$userinput);  
     }  
     return 1;  
 }  
 &register_handler("autocrsrequpdate", \&crsreq_update_handler, 0, 1, 0);  
   
 #  #
 #   Read and retrieve institutional code format (for support form).  #   Read and retrieve institutional code format (for support form).
 # Formal Parameters:  # Formal Parameters:
Line 6616  sub lcpasswdstrerror { Line 6033  sub lcpasswdstrerror {
     }      }
 }  }
   
   #
   # Convert an error return code from lcuseradd to a string value:
   #
   sub lcuseraddstrerror {
       my $ErrorCode = shift;
       if(($ErrorCode < 0) || ($ErrorCode > $lastadderror)) {
    return "lcuseradd - Unrecognized error code: ".$ErrorCode;
       } else {
    return $adderrors[$ErrorCode];
       }
   }
   
 # grabs exception and records it to log before exiting  # grabs exception and records it to log before exiting
 sub catchexception {  sub catchexception {
     my ($error)=@_;      my ($error)=@_;
Line 6652  my $wwwid=getpwnam('www'); Line 6081  my $wwwid=getpwnam('www');
 if ($wwwid!=$<) {  if ($wwwid!=$<) {
    my $emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}";     my $emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}";
    my $subj="LON: $currenthostid User ID mismatch";     my $subj="LON: $currenthostid User ID mismatch";
    system("echo 'User ID mismatch.  lond must be run as user www.' |".     system("echo 'User ID mismatch.  lond must be run as user www.' |\
           " mail -s '$subj' $emailto > /dev/null");   mailto $emailto -s '$subj' > /dev/null");
    exit 1;     exit 1;
 }  }
   
Line 6856  sub Debug { Line 6285  sub Debug {
 #     reply   - Text to send to client.  #     reply   - Text to send to client.
 #     request - Original request from client.  #     request - Original request from client.
 #  #
   #NOTE $reply must be terminated by exactly *one* \n. If $reply is a reference
   #this is done automatically ($$reply must not contain any \n in this case). 
   #If $reply is a string the caller has to ensure this.
 sub Reply {  sub Reply {
     my ($fd, $reply, $request) = @_;      my ($fd, $reply, $request) = @_;
     if (ref($reply)) {      if (ref($reply)) {
Line 7101  sub make_new_child { Line 6533  sub make_new_child {
 #        my $tmpsnum=0;            # Now global  #        my $tmpsnum=0;            # Now global
 #---------------------------------------------------- kerberos 5 initialization  #---------------------------------------------------- kerberos 5 initialization
         &Authen::Krb5::init_context();          &Authen::Krb5::init_context();
    unless (($dist eq 'fedora5') || ($dist eq 'fedora4') ||  
         my $no_ets;   ($dist eq 'fedora6') || ($dist eq 'suse9.3') ||
         if ($dist =~ /^(?:centos|rhes|scientific|oracle)(\d+)$/) {                  ($dist eq 'suse12.2') || ($dist eq 'suse12.3')) {
             if ($1 >= 7) {      &Authen::Krb5::init_ets();
                 $no_ets = 1;   }
             }  
         } elsif ($dist =~ /^suse(\d+\.\d+)$/) {  
             if (($1 eq '9.3') || ($1 >= 12.2)) {  
                 $no_ets = 1;  
             }  
         } elsif ($dist =~ /^sles(\d+)$/) {  
             if ($1 > 11) {  
                 $no_ets = 1;  
             }  
         } elsif ($dist =~ /^fedora(\d+)$/) {  
             if ($1 < 7) {  
                 $no_ets = 1;  
             }  
         }  
         unless ($no_ets) {  
             &Authen::Krb5::init_ets();  
         }  
   
  &status('Accepted connection');   &status('Accepted connection');
 # =============================================================================  # =============================================================================
Line 7165  sub make_new_child { Line 6580  sub make_new_child {
  #   #
  #  If the remote is attempting a local init... give that a try:   #  If the remote is attempting a local init... give that a try:
  #   #
           logthis("remotereq: $remotereq");
  (my $i, my $inittype, $clientversion) = split(/:/, $remotereq);   (my $i, my $inittype, $clientversion) = split(/:/, $remotereq);
                 # For LON-CAPA 2.9, the  client session will have sent its LON-CAPA          # For LON-CAPA 2.9, the  client session will have sent its LON-CAPA
                 # version when initiating the connection. For LON-CAPA 2.8 and older,          # version when initiating the connection. For LON-CAPA 2.8 and older,
                 # the version is retrieved from the global %loncaparevs in lonnet.pm.          # the version is retrieved from the global %loncaparevs in lonnet.pm.            
                 # $clientversion contains path to keyfile if $inittype eq 'local'          # $clientversion contains path to keyfile if $inittype eq 'local'
                 # it's overridden below in this case          # it's overridden below in this case
                 $clientversion ||= $Apache::lonnet::loncaparevs{$clientname};          $clientversion ||= $Apache::lonnet::loncaparevs{$clientname};
   
  # If the connection type is ssl, but I didn't get my   # If the connection type is ssl, but I didn't get my
  # certificate files yet, then I'll drop  back to    # certificate files yet, then I'll drop  back to 
Line 7236  sub make_new_child { Line 6652  sub make_new_child {
   ."Attempted insecure connection disallowed </font>");    ."Attempted insecure connection disallowed </font>");
  close $client;   close $client;
  $clientok = 0;   $clientok = 0;
   
     }      }
  }   }
     } else {      } else {
Line 7244  sub make_new_child { Line 6661  sub make_new_child {
  ."$clientip failed to initialize: >$remotereq< </font>");   ."$clientip failed to initialize: >$remotereq< </font>");
  &status('No init '.$clientip);   &status('No init '.$clientip);
     }      }
       
  } else {   } else {
     &logthis(      &logthis(
      "<font color='blue'>WARNING: Unknown client $clientip</font>");       "<font color='blue'>WARNING: Unknown client $clientip</font>");
Line 7401  sub password_filename { Line 6819  sub password_filename {
 #    domain    - domain of the user.  #    domain    - domain of the user.
 #    name      - User's name.  #    name      - User's name.
 #    contents  - New contents of the file.  #    contents  - New contents of the file.
 #    saveold   - (optional). If true save old file in a passwd.bak file.  
 # Returns:  # Returns:
 #   0    - Failed.  #   0    - Failed.
 #   1    - Success.  #   1    - Success.
 #  #
 sub rewrite_password_file {  sub rewrite_password_file {
     my ($domain, $user, $contents, $saveold) = @_;      my ($domain, $user, $contents) = @_;
   
     my $file = &password_filename($domain, $user);      my $file = &password_filename($domain, $user);
     if (defined $file) {      if (defined $file) {
         if ($saveold) {  
             my $bakfile = $file.'.bak';  
             if (CopyFile($file,$bakfile)) {  
                 chmod(0400,$bakfile);  
                 &logthis("Old password saved in passwd.bak for internally authenticated user: $user:$domain");  
             } else {  
                 &logthis("Failed to save old password in passwd.bak for internally authenticated user: $user:$domain");  
             }  
         }  
  my $pf = IO::File->new(">$file");   my $pf = IO::File->new(">$file");
  if($pf) {   if($pf) {
     print $pf "$contents\n";      print $pf "$contents\n";
Line 7510  sub validate_user { Line 6918  sub validate_user {
                 $contentpwd = $domdefaults{'auth_arg_def'};                   $contentpwd = $domdefaults{'auth_arg_def'}; 
             }              }
         }          }
     }      } 
     if ($howpwd ne 'nouser') {      if ($howpwd ne 'nouser') {
  if($howpwd eq "internal") { # Encrypted is in local password file.   if($howpwd eq "internal") { # Encrypted is in local password file.
             if (length($contentpwd) == 13) {      $validated = (crypt($password, $contentpwd) eq $contentpwd);
                 $validated = (crypt($password,$contentpwd) eq $contentpwd);  
                 if ($validated) {  
                     my %domdefaults = &Apache::lonnet::get_domain_defaults($domain);  
                     if ($domdefaults{'intauth_switch'}) {  
                         my $ncpass = &hash_passwd($domain,$password);  
                         my $saveold;  
                         if ($domdefaults{'intauth_switch'} == 2) {  
                             $saveold = 1;  
                         }  
                         if (&rewrite_password_file($domain,$user,"$howpwd:$ncpass",$saveold)) {  
                             &update_passwd_history($user,$domain,$howpwd,'conversion');  
                             &logthis("Validated password hashed with bcrypt for $user:$domain");  
                         }  
                     }  
                 }  
             } else {  
                 $validated = &check_internal_passwd($password,$contentpwd,$domain,$user);  
             }  
  }   }
  elsif ($howpwd eq "unix") { # User is a normal unix user.   elsif ($howpwd eq "unix") { # User is a normal unix user.
     $contentpwd = (getpwnam($user))[1];      $contentpwd = (getpwnam($user))[1];
Line 7599  sub validate_user { Line 6989  sub validate_user {
     return $validated;      return $validated;
 }  }
   
 sub check_internal_passwd {  
     my ($plainpass,$stored,$domain,$user) = @_;  
     my (undef,$method,@rest) = split(/!/,$stored);  
     if ($method eq 'bcrypt') {  
         my $result = &hash_passwd($domain,$plainpass,@rest);  
         if ($result ne $stored) {  
             return 0;  
         }  
         my %domdefaults = &Apache::lonnet::get_domain_defaults($domain);  
         if ($domdefaults{'intauth_check'}) {  
             # Upgrade to a larger number of rounds if necessary  
             my $defaultcost = $domdefaults{'intauth_cost'};  
             if (($defaultcost eq '') || ($defaultcost =~ /D/)) {  
                 $defaultcost = 10;  
             }  
             if (int($rest[0])<int($defaultcost)) {  
                 if ($domdefaults{'intauth_check'} == 1) {  
                     my $ncpass = &hash_passwd($domain,$plainpass);  
                     if (&rewrite_password_file($domain,$user,"internal:$ncpass")) {  
                         &update_passwd_history($user,$domain,'internal','update cost');  
                         &logthis("Validated password hashed with bcrypt for $user:$domain");  
                     }  
                     return 1;  
                 } elsif ($domdefaults{'intauth_check'} == 2) {  
                     return 0;  
                 }  
             }  
         } else {  
             return 1;  
         }  
     }  
     return 0;  
 }  
   
 sub get_last_authchg {  
     my ($domain,$user) = @_;  
     my $lastmod;  
     my $logname = &propath($domain,$user).'/passwd.log';  
     if (-e "$logname") {  
         $lastmod = (stat("$logname"))[9];  
     }  
     return $lastmod;  
 }  
   
 sub krb4_authen {  sub krb4_authen {
     my ($password,$null,$user,$contentpwd) = @_;      my ($password,$null,$user,$contentpwd) = @_;
     my $validated = 0;      my $validated = 0;
Line 7958  sub change_unix_password { Line 7304  sub change_unix_password {
   
   
 sub make_passwd_file {  sub make_passwd_file {
     my ($uname,$udom,$umode,$npass,$passfilename,$action)=@_;      my ($uname,$udom,$umode,$npass,$passfilename)=@_;
     my $result="ok";      my $result="ok";
     if ($umode eq 'krb4' or $umode eq 'krb5') {      if ($umode eq 'krb4' or $umode eq 'krb5') {
  {   {
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new(">$passfilename");
     if ($pf) {      if ($pf) {
  print $pf "$umode:$npass\n";   print $pf "$umode:$npass\n";
                 &update_passwd_history($uname,$udom,$umode,$action);  
     } else {      } else {
  $result = "pass_file_failed_error";   $result = "pass_file_failed_error";
     }      }
  }   }
     } elsif ($umode eq 'internal') {      } elsif ($umode eq 'internal') {
         my $ncpass = &hash_passwd($udom,$npass);   my $salt=time;
    $salt=substr($salt,6,2);
    my $ncpass=crypt($npass,$salt);
  {   {
     &Debug("Creating internal auth");      &Debug("Creating internal auth");
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new(">$passfilename");
     if($pf) {      if($pf) {
  print $pf "internal:$ncpass\n";    print $pf "internal:$ncpass\n"; 
                 &update_passwd_history($uname,$udom,$umode,$action);  
     } else {      } else {
  $result = "pass_file_failed_error";   $result = "pass_file_failed_error";
     }      }
Line 7987  sub make_passwd_file { Line 7333  sub make_passwd_file {
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new(">$passfilename");
     if($pf) {      if($pf) {
  print $pf "localauth:$npass\n";   print $pf "localauth:$npass\n";
                 &update_passwd_history($uname,$udom,$umode,$action);  
     } else {      } else {
  $result = "pass_file_failed_error";   $result = "pass_file_failed_error";
     }      }
  }   }
     } elsif ($umode eq 'unix') {      } elsif ($umode eq 'unix') {
  &logthis(">>>Attempt to create unix account blocked -- unix auth not available for new users.");   {
  $result="no_new_unix_accounts";      #
       #  Don't allow the creation of privileged accounts!!! that would
       #  be real bad!!!
       #
       my $uid = getpwnam($uname);
       if((defined $uid) && ($uid == 0)) {
    &logthis(">>>Attempt to create privileged account blocked");
    return "no_priv_account_error\n";
       }
   
       my $execpath       ="$perlvar{'lonDaemons'}/"."lcuseradd";
   
       my $lc_error_file  = $execdir."/tmp/lcuseradd".$$.".status";
       {
    &Debug("Executing external: ".$execpath);
    &Debug("user  = ".$uname.", Password =". $npass);
    my $se = IO::File->new("|$execpath > $perlvar{'lonDaemons'}/logs/lcuseradd.log");
    print $se "$uname\n";
                   print $se "$udom\n";
    print $se "$npass\n";
    print $se "$npass\n";
    print $se "$lc_error_file\n"; # Status -> unique file.
       }
       if (-r $lc_error_file) {
    &Debug("Opening error file: $lc_error_file");
    my $error = IO::File->new("< $lc_error_file");
    my $useraddok = <$error>;
    $error->close;
    unlink($lc_error_file);
   
    chomp $useraddok;
   
    if($useraddok > 0) {
       my $error_text = &lcuseraddstrerror($useraddok);
       &logthis("Failed lcuseradd: $error_text");
       $result = "lcuseradd_failed:$error_text";
    }  else {
       my $pf = IO::File->new(">$passfilename");
       if($pf) {
    print $pf "unix:\n";
       } else {
    $result = "pass_file_failed_error";
       }
    }
       }  else {
    &Debug("Could not locate lcuseradd error: $lc_error_file");
    $result="bug_lcuseradd_no_output_file";
       }
    }
     } elsif ($umode eq 'none') {      } elsif ($umode eq 'none') {
  {   {
     my $pf = IO::File->new("> $passfilename");      my $pf = IO::File->new("> $passfilename");
Line 8058  sub get_usersession_config { Line 7451  sub get_usersession_config {
     return;      return;
 }  }
   
 sub get_usersearch_config {  
     my ($dom,$name) = @_;  
     my ($usersearchconf,$cached)=&Apache::lonnet::is_cached_new($name,$dom);  
     if (defined($cached)) {  
         return $usersearchconf;  
     } else {  
         my %domconfig = &Apache::lonnet::get_dom('configuration',['directorysrch'],$dom);  
         &Apache::lonnet::do_cache_new($name,$dom,$domconfig{'directorysrch'},3600);  
         return $domconfig{'directorysrch'};  
     }  
     return;  
 }  
   
 sub distro_and_arch {  sub distro_and_arch {
     return $dist.':'.$arch;      return $dist.':'.$arch;
Line 8399  Authen::Krb5 Line 7782  Authen::Krb5
   
 =head1 COREQUISITES  =head1 COREQUISITES
   
   none
   
 =head1 OSNAMES  =head1 OSNAMES
   
 linux  linux
Line 8486  or the CA's certificate in the call to l Line 7871  or the CA's certificate in the call to l
 <error> is the textual reason this failed.  Usual reasons:  <error> is the textual reason this failed.  Usual reasons:
   
 =over 2  =over 2
          
 =item Apache config file for loncapa  incorrect:  =item Apache config file for loncapa  incorrect:
    
 one of the variables   one of the variables 
 lonCertificateDirectory, lonnetCertificateAuthority, or lonnetCertificate  lonCertificateDirectory, lonnetCertificateAuthority, or lonnetCertificate
 undefined or incorrect  undefined or incorrect
Line 8607  Could not rewrite the Line 7992  Could not rewrite the
 internal password file for a user  internal password file for a user
   
 =item Result of password change for <user> : <result>  =item Result of password change for <user> : <result>
                                                                        
 A unix password change for <user> was attempted   A unix password change for <user> was attempted 
 and the pipe returned <result>    and the pipe returned <result>  
   
Line 8636  lond has been asked to exit by its clien Line 8021  lond has been asked to exit by its clien
 client systemand <input> is the full exit command sent to the server.  client systemand <input> is the full exit command sent to the server.
   
 =item Red CRITICAL: ABNORMAL EXIT. child <pid> for server <hostname> died through a crass with this error->[<message>].  =item Red CRITICAL: ABNORMAL EXIT. child <pid> for server <hostname> died through a crass with this error->[<message>].
                                                    
 A lond child terminated.  NOte that this termination can also occur when the  A lond child terminated.  NOte that this termination can also occur when the
 child receives the QUIT or DIE signals.  <pid> is the process id of the child,  child receives the QUIT or DIE signals.  <pid> is the process id of the child,
 <hostname> the host lond is working for, and <message> the reason the child died  <hostname> the host lond is working for, and <message> the reason the child died
Line 8720  file when sent it's USR1 signal.  That p Line 8105  file when sent it's USR1 signal.  That p
 assumed to be hung in some un-fixable way.  assumed to be hung in some un-fixable way.
   
 =item Finished checking children                     =item Finished checking children                   
    
 Master processs's USR1 processing is cojmplete.  Master processs's USR1 processing is cojmplete.
   
 =item (Red) CRITICAL: ------- Starting ------              =item (Red) CRITICAL: ------- Starting ------            
Line 8734  Started a new child process for <client> Line 8119  Started a new child process for <client>
 connected to the child.  This was as a result of a TCP/IP connection from a client.  connected to the child.  This was as a result of a TCP/IP connection from a client.
   
 =item Unable to determine who caller was, getpeername returned nothing  =item Unable to determine who caller was, getpeername returned nothing
                                                     
 In child process initialization.  either getpeername returned undef or  In child process initialization.  either getpeername returned undef or
 a zero sized object was returned.  Processing continues, but in my opinion,  a zero sized object was returned.  Processing continues, but in my opinion,
 this should be cause for the child to exit.  this should be cause for the child to exit.
Line 8745  In child process initialization.  The pe Line 8130  In child process initialization.  The pe
 The client address is stored as "Unavailable" and processing continues.  The client address is stored as "Unavailable" and processing continues.
   
 =item (Yellow) INFO: Connection <ip> <name> connection type = <type>  =item (Yellow) INFO: Connection <ip> <name> connection type = <type>
                                                     
 In child initialization.  A good connectionw as received from <ip>.  In child initialization.  A good connectionw as received from <ip>.
   
 =over 2  =over 2
Line 8795  The client (<client> is the peer's name Line 8180  The client (<client> is the peer's name
 negotiated an SSL connection with this child process.  negotiated an SSL connection with this child process.
   
 =item (Green) Successful insecure authentication with <client>  =item (Green) Successful insecure authentication with <client>
                                                      
   
 The client has successfully negotiated an  insecure connection withthe child process.  The client has successfully negotiated an  insecure connection withthe child process.
   
Removed from v.1.489.2.40  
changed lines
  Added in v.1.501

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>