--- loncom/lond 2013/07/25 19:11:07 1.501
+++ loncom/lond 2017/02/28 05:42:06 1.532
@@ -2,7 +2,7 @@
# The LearningOnline Network
# lond "LON Daemon" Server (port "LOND" 5663)
#
-# $Id: lond,v 1.501 2013/07/25 19:11:07 raeburn Exp $
+# $Id: lond,v 1.532 2017/02/28 05:42:06 raeburn Exp $
#
# Copyright Michigan State University Board of Trustees
#
@@ -15,7 +15,6 @@
#
# LON-CAPA is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
@@ -36,12 +35,13 @@ use LONCAPA;
use LONCAPA::Configuration;
use LONCAPA::Lond;
+use Socket;
use IO::Socket;
use IO::File;
#use Apache::File;
use POSIX;
use Crypt::IDEA;
-use LWP::UserAgent();
+use HTTP::Request;
use Digest::MD5 qw(md5_hex);
use GDBM_File;
use Authen::Krb5;
@@ -55,13 +55,17 @@ use LONCAPA::lonssl;
use Fcntl qw(:flock);
use Apache::lonnet;
use Mail::Send;
+use Crypt::Eksblowfish::Bcrypt;
+use Digest::SHA;
+use Encode;
+use LONCAPA::LWPReq;
my $DEBUG = 0; # Non zero to enable debug log entries.
my $status='';
my $lastlog='';
-my $VERSION='$Revision: 1.501 $'; #' stupid emacs
+my $VERSION='$Revision: 1.532 $'; #' stupid emacs
my $remoteVERSION;
my $currenthostid="default";
my $currentdomainid;
@@ -71,8 +75,16 @@ my $clientip; # IP address of client.
my $clientname; # LonCAPA name of client.
my $clientversion; # LonCAPA version running on client.
my $clienthomedom; # LonCAPA domain of homeID for client.
- # primary library server.
-
+my $clientintdom; # LonCAPA "internet domain" for client.
+my $clientsamedom; # LonCAPA domain same for this host
+ # and client.
+my $clientsameinst; # LonCAPA "internet domain" same for
+ # this host and client.
+my $clientremoteok; # Client allowed to host domain's users.
+ # (version constraints ignored), not set
+ # if this host and client share "internet domain".
+my %clientprohibited; # Actions prohibited on client;
+
my $server;
my $keymode;
@@ -93,6 +105,9 @@ my %managers; # Ip -> manager names
my %perlvar; # Will have the apache conf defined perl vars.
+my %secureconf; # Will have requirements for security
+ # of lond connections
+
my $dist;
#
@@ -130,25 +145,6 @@ my @passwderrors = ("ok",
"pwchange_failure - lcpasswd Error filename is invalid");
-# The array below are lcuseradd error strings.:
-
-my $lastadderror = 13;
-my @adderrors = ("ok",
- "User ID mismatch, lcuseradd must run as user www",
- "lcuseradd Incorrect number of command line parameters must be 3",
- "lcuseradd Incorrect number of stdinput lines, must be 3",
- "lcuseradd Too many other simultaneous pwd changes in progress",
- "lcuseradd User does not exist",
- "lcuseradd Unable to make www member of users's group",
- "lcuseradd Unable to su to root",
- "lcuseradd Unable to set password",
- "lcuseradd Username has invalid characters",
- "lcuseradd Password has an invalid character",
- "lcuseradd User already exists",
- "lcuseradd Could not add user.",
- "lcuseradd Password mismatch");
-
-
# This array are the errors from lcinstallfile:
my @installerrors = ("ok",
@@ -161,6 +157,145 @@ my @installerrors = ("ok",
);
#
+# The %trust hash classifies commands according to type of trust
+# required for execution of the command.
+#
+# When clients from a different institution request execution of a
+# particular command, the trust settings for that institution set
+# for this domain (or default domain for a multi-domain server) will
+# be checked to see if running the command is allowed.
+#
+# Trust types which depend on the "Trust" domain configuration
+# for the machine's default domain are:
+#
+# content ("Access to this domain's content by others")
+# shared ("Access to other domain's content by this domain")
+# enroll ("Enrollment in this domain's courses by others")
+# coaurem ("Co-author roles for this domain's users elsewhere")
+# domroles ("Domain roles in this domain assignable to others")
+# catalog ("Course Catalog for this domain displayed elsewhere")
+# reqcrs ("Requests for creation of courses in this domain by others")
+# msg ("Users in other domains can send messages to this domain")
+#
+# Trust type which depends on the User Session Hosting (remote)
+# domain configuration for machine's default domain is: "remote".
+#
+# Trust types which depend on contents of manager.tab in
+# /home/httpd/lonTabs is: "manageronly".
+#
+# Trust type which requires client to share the same LON-CAPA
+# "internet domain" (i.e., same institution as this server) is:
+# "institutiononly".
+#
+
+my %trust = (
+ auth => {remote => 1},
+ autocreatepassword => {remote => 1},
+ autocrsreqchecks => {remote => 1, reqcrs => 1},
+ autocrsrequpdate => {remote => 1},
+ autocrsreqvalidation => {remote => 1},
+ autogetsections => {remote => 1},
+ autoinstcodedefaults => {remote => 1, catalog => 1},
+ autoinstcodeformat => {remote => 1, catalog => 1},
+ autonewcourse => {remote => 1, reqcrs => 1},
+ autophotocheck => {remote => 1, enroll => 1},
+ autophotochoice => {remote => 1},
+ autophotopermission => {remote => 1, enroll => 1},
+ autopossibleinstcodes => {remote => 1, reqcrs => 1},
+ autoretrieve => {remote => 1, enroll => 1, catalog => 1},
+ autorun => {remote => 1, enroll => 1, reqcrs => 1},
+ autovalidateclass_sec => {catalog => 1},
+ autovalidatecourse => {remote => 1, enroll => 1},
+ autovalidateinstcode => {domroles => 1, remote => 1, enroll => 1},
+ changeuserauth => {remote => 1, domroles => 1},
+ chatretr => {remote => 1, enroll => 1},
+ chatsend => {remote => 1, enroll => 1},
+ courseiddump => {remote => 1, domroles => 1, enroll => 1},
+ courseidput => {remote => 1, domroles => 1, enroll => 1},
+ courseidputhash => {remote => 1, domroles => 1, enroll => 1},
+ courselastaccess => {remote => 1, domroles => 1, enroll => 1},
+ currentauth => {remote => 1, domroles => 1, enroll => 1},
+ currentdump => {remote => 1, enroll => 1},
+ currentversion => {remote=> 1, content => 1},
+ dcmaildump => {remote => 1, domroles => 1},
+ dcmailput => {remote => 1, domroles => 1},
+ del => {remote => 1, domroles => 1, enroll => 1, content => 1},
+ deldom => {remote => 1, domroles => 1}, # not currently used
+ devalidatecache => {institutiononly => 1},
+ domroleput => {remote => 1, enroll => 1},
+ domrolesdump => {remote => 1, catalog => 1},
+ du => {remote => 1, enroll => 1},
+ du2 => {remote => 1, enroll => 1},
+ dump => {remote => 1, enroll => 1, domroles => 1},
+ edit => {institutiononly => 1}, #not used currently
+ eget => {remote => 1, domroles => 1, enroll => 1}, #not used currently
+ ekey => {}, #not used currently
+ exit => {anywhere => 1},
+ fetchuserfile => {remote => 1, enroll => 1},
+ get => {remote => 1, domroles => 1, enroll => 1},
+ getdom => {anywhere => 1},
+ home => {anywhere => 1},
+ iddel => {remote => 1, enroll => 1},
+ idget => {remote => 1, enroll => 1},
+ idput => {remote => 1, domroles => 1, enroll => 1},
+ inc => {remote => 1, enroll => 1},
+ init => {anywhere => 1},
+ inst_usertypes => {remote => 1, domroles => 1, enroll => 1},
+ instemailrules => {remote => 1, domroles => 1},
+ instidrulecheck => {remote => 1, domroles => 1,},
+ instidrules => {remote => 1, domroles => 1,},
+ instrulecheck => {remote => 1, enroll => 1, reqcrs => 1, domroles => 1},
+ instselfcreatecheck => {institutiononly => 1},
+ instuserrules => {remote => 1, enroll => 1, reqcrs => 1, domroles => 1},
+ keys => {remote => 1,},
+ load => {anywhere => 1},
+ log => {anywhere => 1},
+ ls => {remote => 1, enroll => 1, content => 1,},
+ ls2 => {remote => 1, enroll => 1, content => 1,},
+ ls3 => {remote => 1, enroll => 1, content => 1,},
+ makeuser => {remote => 1, enroll => 1, domroles => 1,},
+ mkdiruserfile => {remote => 1, enroll => 1,},
+ newput => {remote => 1, enroll => 1, reqcrs => 1, domroles => 1,},
+ passwd => {remote => 1},
+ ping => {anywhere => 1},
+ pong => {anywhere => 1},
+ pushfile => {manageronly => 1},
+ put => {remote => 1, enroll => 1, domroles => 1, msg => 1, content => 1, shared => 1},
+ putdom => {remote => 1, domroles => 1,},
+ putstore => {remote => 1, enroll => 1},
+ queryreply => {anywhere => 1},
+ querysend => {anywhere => 1},
+ quit => {anywhere => 1},
+ readlonnetglobal => {institutiononly => 1},
+ reinit => {manageronly => 1}, #not used currently
+ removeuserfile => {remote => 1, enroll => 1},
+ renameuserfile => {remote => 1,},
+ restore => {remote => 1, enroll => 1, reqcrs => 1,},
+ rolesdel => {remote => 1, enroll => 1, domroles => 1, coaurem => 1},
+ rolesput => {remote => 1, enroll => 1, domroles => 1, coaurem => 1},
+ servercerts => {institutiononly => 1},
+ serverdistarch => {anywhere => 1},
+ serverhomeID => {anywhere => 1},
+ serverloncaparev => {anywhere => 1},
+ servertimezone => {remote => 1, enroll => 1},
+ setannounce => {remote => 1, domroles => 1},
+ sethost => {anywhere => 1},
+ store => {remote => 1, enroll => 1, reqcrs => 1,},
+ studentphoto => {remote => 1, enroll => 1},
+ sub => {content => 1,},
+ tmpdel => {anywhere => 1},
+ tmpget => {anywhere => 1},
+ tmpput => {anywhere => 1},
+ tokenauthuserfile => {anywhere => 1},
+ unsub => {content => 1,},
+ update => {shared => 1},
+ updateclickers => {remote => 1},
+ userhassession => {anywhere => 1},
+ userload => {anywhere => 1},
+ version => {anywhere => 1}, #not used
+ );
+
+#
# Statistics that are maintained and dislayed in the status line.
#
my $Transactions = 0; # Number of attempted transactions.
@@ -316,8 +451,23 @@ sub InsecureConnection {
my $Socket = shift;
# Don't even start if insecure connections are not allowed.
-
- if(! $perlvar{londAllowInsecure}) { # Insecure connections not allowed.
+ # return 0 if Insecure connections not allowed.
+ #
+ if (ref($secureconf{'connfrom'}) eq 'HASH') {
+ if ($clientsamedom) {
+ if ($secureconf{'connfrom'}{'dom'} eq 'req') {
+ return 0;
+ }
+ } elsif ($clientsameinst) {
+ if ($secureconf{'connfrom'}{'intdom'} eq 'req') {
+ return 0;
+ }
+ } else {
+ if ($secureconf{'connfrom'}{'other'} eq 'req') {
+ return 0;
+ }
+ }
+ } elsif (!$perlvar{londAllowInsecure}) {
return 0;
}
@@ -640,7 +790,7 @@ sub ConfigFileFromSelector {
# String to send to client ("ok" or "refused" if bad file).
#
sub PushFile {
- my $request = shift;
+ my $request = shift;
my ($command, $filename, $contents) = split(":", $request, 3);
&Debug("PushFile");
@@ -670,6 +820,42 @@ sub PushFile {
if($filename eq "host") {
$contents = AdjustHostContents($contents);
+ } elsif ($filename eq 'dns_host' || $filename eq 'dns_domain') {
+ if ($contents eq '') {
+ &logthis(' Pushfile: unable to install '
+ .$tablefile." - no data received from push. ");
+ return 'error: push had no data';
+ }
+ if (&Apache::lonnet::get_host_ip($clientname)) {
+ my $clienthost = &Apache::lonnet::hostname($clientname);
+ if ($managers{$clientip} eq $clientname) {
+ my $clientprotocol = $Apache::lonnet::protocol{$clientname};
+ $clientprotocol = 'http' if ($clientprotocol ne 'https');
+ my $url = '/adm/'.$filename;
+ $url =~ s{_}{/};
+ my $request=new HTTP::Request('GET',"$clientprotocol://$clienthost$url");
+ my $response = LONCAPA::LWPReq::makerequest($clientname,$request,'',\%perlvar,60,0);
+ if ($response->is_error()) {
+ &logthis(' Pushfile: unable to install '
+ .$tablefile." - error attempting to pull data. ");
+ return 'error: pull failed';
+ } else {
+ my $result = $response->content;
+ chomp($result);
+ unless ($result eq $contents) {
+ &logthis(' Pushfile: unable to install '
+ .$tablefile." - pushed data and pulled data differ. ");
+ my $pushleng = length($contents);
+ my $pullleng = length($result);
+ if ($pushleng != $pullleng) {
+ return "error: $pushleng vs $pullleng bytes";
+ } else {
+ return "error: mismatch push and pull";
+ }
+ }
+ }
+ }
+ }
}
# Install the new file:
@@ -1403,6 +1589,20 @@ sub du2_handler {
# selected directory the filename followed by the full output of
# the stat function is returned. The returned info for each
# file are separated by ':'. The stat fields are separated by &'s.
+#
+# If the requested path contains /../ or is:
+#
+# 1. for a directory, and the path does not begin with one of:
+# (a) /home/httpd/html/res/
+# (b) /home/httpd/html/res/userfiles/
+# (c) /home/httpd/lonUsers//<1>/<2>/<3>//userfiles
+# or is:
+#
+# 2. for a file, and the path (after prepending) does not begin with:
+# /home/httpd/lonUsers//<1>/<2>/<3>//
+#
+# the response will be "refused".
+#
# Parameters:
# $cmd - The command that dispatched us (ls).
# $ulsdir - The directory path to list... I'm not sure what this
@@ -1424,8 +1624,17 @@ sub ls_handler {
my $rights;
my $ulsout='';
my $ulsfn;
+ if ($ulsdir =~m{/\.\./}) {
+ &Failure($client,"refused\n",$userinput);
+ return 1;
+ }
if (-e $ulsdir) {
if(-d $ulsdir) {
+ unless (($ulsdir =~ m{/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) ||
+ ($ulsdir =~ m{/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_username/userfiles/})) {
+ &Failure($client,"refused\n",$userinput);
+ return 1;
+ }
if (opendir(LSDIR,$ulsdir)) {
while ($ulsfn=readdir(LSDIR)) {
undef($obs);
@@ -1449,6 +1658,10 @@ sub ls_handler {
closedir(LSDIR);
}
} else {
+ unless ($ulsdir =~ m{/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_username/}) {
+ &Failure($client,"refused\n",$userinput);
+ return 1;
+ }
my @ulsstats=stat($ulsdir);
$ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
}
@@ -1473,6 +1686,20 @@ sub ls_handler {
# selected directory the filename followed by the full output of
# the stat function is returned. The returned info for each
# file are separated by ':'. The stat fields are separated by &'s.
+#
+# If the requested path contains /../ or is:
+#
+# 1. for a directory, and the path does not begin with one of:
+# (a) /home/httpd/html/res/
+# (b) /home/httpd/html/res/userfiles/
+# (c) /home/httpd/lonUsers//<1>/<2>/<3>//userfiles
+# or is:
+#
+# 2. for a file, and the path (after prepending) does not begin with:
+# /home/httpd/lonUsers//<1>/<2>/<3>//
+#
+# the response will be "refused".
+#
# Parameters:
# $cmd - The command that dispatched us (ls).
# $ulsdir - The directory path to list... I'm not sure what this
@@ -1493,8 +1720,17 @@ sub ls2_handler {
my $rights;
my $ulsout='';
my $ulsfn;
+ if ($ulsdir =~m{/\.\./}) {
+ &Failure($client,"refused\n",$userinput);
+ return 1;
+ }
if (-e $ulsdir) {
if(-d $ulsdir) {
+ unless (($ulsdir =~ m{/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) ||
+ ($ulsdir =~ m{/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_username/userfiles/})) {
+ &Failure($client,"refused\n","$userinput");
+ return 1;
+ }
if (opendir(LSDIR,$ulsdir)) {
while ($ulsfn=readdir(LSDIR)) {
undef($obs);
@@ -1519,6 +1755,10 @@ sub ls2_handler {
closedir(LSDIR);
}
} else {
+ unless ($ulsdir =~ m{/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_username/}) {
+ &Failure($client,"refused\n",$userinput);
+ return 1;
+ }
my @ulsstats=stat($ulsdir);
$ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
}
@@ -1535,6 +1775,22 @@ sub ls2_handler {
# selected directory the filename followed by the full output of
# the stat function is returned. The returned info for each
# file are separated by ':'. The stat fields are separated by &'s.
+#
+# If the requested path (after prepending) contains /../ or is:
+#
+# 1. for a directory, and the path does not begin with one of:
+# (a) /home/httpd/html/res/
+# (b) /home/httpd/html/res/userfiles/
+# (c) /home/httpd/lonUsers//<1>/<2>/<3>//userfiles
+# (d) /home/httpd/html/priv// and client is the homeserver
+#
+# or is:
+#
+# 2. for a file, and the path (after prepending) does not begin with:
+# /home/httpd/lonUsers//<1>/<2>/<3>//
+#
+# the response will be "refused".
+#
# Parameters:
# $cmd - The command that dispatched us (ls).
# $tail - The tail of the request that invoked us.
@@ -1574,22 +1830,12 @@ sub ls3_handler {
}
my $dir_root = $perlvar{'lonDocRoot'};
- if ($getpropath) {
+ if (($getpropath) || ($getuserdir)) {
if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) {
$dir_root = &propath($udom,$uname);
$dir_root =~ s/\/$//;
} else {
- &Failure($client,"refused\n","$cmd:$tail");
- return 1;
- }
- } elsif ($getuserdir) {
- if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) {
- my $subdir=$uname.'__';
- $subdir =~ s/(.)(.)(.).*/$1\/$2\/$3/;
- $dir_root = $Apache::lonnet::perlvar{'lonUsersDir'}
- ."/$udom/$subdir/$uname";
- } else {
- &Failure($client,"refused\n","$cmd:$tail");
+ &Failure($client,"refused\n",$userinput);
return 1;
}
} elsif ($alternate_root ne '') {
@@ -1602,12 +1848,28 @@ sub ls3_handler {
$ulsdir = $dir_root.'/'.$ulsdir;
}
}
+ if ($ulsdir =~m{/\.\./}) {
+ &Failure($client,"refused\n",$userinput);
+ return 1;
+ }
+ my $islocal;
+ my @machine_ids = &Apache::lonnet::current_machine_ids();
+ if (grep(/^\Q$clientname\E$/,@machine_ids)) {
+ $islocal = 1;
+ }
my $obs;
my $rights;
my $ulsout='';
my $ulsfn;
if (-e $ulsdir) {
if(-d $ulsdir) {
+ unless (($getpropath) || ($getuserdir) ||
+ ($ulsdir =~ m{/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) ||
+ ($ulsdir =~ m{/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_username/userfiles/}) ||
+ (($ulsdir =~ m{/home/httpd/html/priv/$LONCAPA::match_domain/}) && ($islocal))) {
+ &Failure($client,"refused\n",$userinput);
+ return 1;
+ }
if (opendir(LSDIR,$ulsdir)) {
while ($ulsfn=readdir(LSDIR)) {
undef($obs);
@@ -1632,6 +1894,11 @@ sub ls3_handler {
closedir(LSDIR);
}
} else {
+ unless (($getpropath) || ($getuserdir) ||
+ ($ulsdir =~ m{/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_username/})) {
+ &Failure($client,"refused\n",$userinput);
+ return 1;
+ }
my @ulsstats=stat($ulsdir);
$ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
}
@@ -1655,15 +1922,17 @@ sub read_lonnet_global {
);
my %limit_to = (
perlvar => {
- lonOtherAuthen => 1,
- lonBalancer => 1,
- lonVersion => 1,
- lonSysEMail => 1,
- lonHostID => 1,
- lonRole => 1,
- lonDefDomain => 1,
- lonLoadLim => 1,
- lonUserLoadLim => 1,
+ lonOtherAuthen => 1,
+ lonBalancer => 1,
+ lonVersion => 1,
+ lonAdmEMail => 1,
+ lonSupportEMail => 1,
+ lonSysEMail => 1,
+ lonHostID => 1,
+ lonRole => 1,
+ lonDefDomain => 1,
+ lonLoadLim => 1,
+ lonUserLoadLim => 1,
}
);
if (ref($requested) eq 'HASH') {
@@ -1704,8 +1973,14 @@ sub read_lonnet_global {
sub server_devalidatecache_handler {
my ($cmd,$tail,$client) = @_;
my $userinput = "$cmd:$tail";
- my ($name,$id) = map { &unescape($_); } split(/:/,$tail);
- &Apache::lonnet::devalidate_cache_new($name,$id);
+ my $items = &unescape($tail);
+ my @cached = split(/\&/,$items);
+ foreach my $key (@cached) {
+ if ($key =~ /:/) {
+ my ($name,$id) = map { &unescape($_); } split(/:/,$key);
+ &Apache::lonnet::devalidate_cache_new($name,$id);
+ }
+ }
my $result = 'ok';
&Reply($client,\$result,$userinput);
return 1;
@@ -1769,6 +2044,16 @@ sub server_distarch_handler {
}
®ister_handler("serverdistarch", \&server_distarch_handler, 0, 1, 0);
+sub server_certs_handler {
+ my ($cmd,$tail,$client) = @_;
+ my $userinput = "$cmd:$tail";
+ my $result;
+ my $result = &LONCAPA::Lond::server_certs(\%perlvar);
+ &Reply($client,\$result,$userinput);
+ return;
+}
+®ister_handler("servercerts", \&server_certs_handler, 0, 1, 0);
+
# Process a reinit request. Reinit requests that either
# lonc or lond be reinitialized so that an updated
# host.tab or domain.tab can be processed.
@@ -1901,7 +2186,7 @@ sub authenticate_handler {
my ($remote,$hosted);
my $remotesession = &get_usersession_config($udom,'remotesession');
if (ref($remotesession) eq 'HASH') {
- $remote = $remotesession->{'remote'}
+ $remote = $remotesession->{'remote'};
}
my $hostedsession = &get_usersession_config($clienthomedom,'hostedsession');
if (ref($hostedsession) eq 'HASH') {
@@ -1988,15 +2273,14 @@ sub change_password_handler {
my ($howpwd,$contentpwd)=split(/:/,$realpasswd);
if ($howpwd eq 'internal') {
&Debug("internal auth");
- my $salt=time;
- $salt=substr($salt,6,2);
- my $ncpass=crypt($npass,$salt);
+ my $ncpass = &hash_passwd($udom,$npass);
if(&rewrite_password_file($udom, $uname, "internal:$ncpass")) {
my $msg="Result of password change for $uname: pwchange_success";
if ($lonhost) {
$msg .= " - request originated from: $lonhost";
}
&logthis($msg);
+ &update_passwd_history($uname,$udom,$howpwd,$context);
&Reply($client, "ok\n", $userinput);
} else {
&logthis("Unable to open $uname passwd "
@@ -2005,6 +2289,9 @@ sub change_password_handler {
}
} elsif ($howpwd eq 'unix' && $context ne 'reset_by_email') {
my $result = &change_unix_password($uname, $npass);
+ if ($result eq 'ok') {
+ &update_passwd_history($uname,$udom,$howpwd,$context);
+ }
&logthis("Result of password change for $uname: ".
$result);
&Reply($client, \$result, $userinput);
@@ -2027,6 +2314,42 @@ sub change_password_handler {
}
®ister_handler("passwd", \&change_password_handler, 1, 1, 0);
+sub hash_passwd {
+ my ($domain,$plainpass,@rest) = @_;
+ my ($salt,$cost);
+ if (@rest) {
+ $cost = $rest[0];
+ # salt is first 22 characters, base-64 encoded by bcrypt
+ my $plainsalt = substr($rest[1],0,22);
+ $salt = Crypt::Eksblowfish::Bcrypt::de_base64($plainsalt);
+ } else {
+ my $defaultcost;
+ my %domconfig =
+ &Apache::lonnet::get_dom('configuration',['password'],$domain);
+ if (ref($domconfig{'password'}) eq 'HASH') {
+ $defaultcost = $domconfig{'password'}{'cost'};
+ }
+ if (($defaultcost eq '') || ($defaultcost =~ /D/)) {
+ $cost = 10;
+ } else {
+ $cost = $defaultcost;
+ }
+ # Generate random 16-octet base64 salt
+ $salt = "";
+ $salt .= pack("C", int rand(256)) for 1..16;
+ }
+ my $hash = &Crypt::Eksblowfish::Bcrypt::bcrypt_hash({
+ key_nul => 1,
+ cost => $cost,
+ salt => $salt,
+ }, Digest::SHA::sha512(Encode::encode('UTF-8',$plainpass)));
+
+ my $result = join("!", "", "bcrypt", sprintf("%02d",$cost),
+ &Crypt::Eksblowfish::Bcrypt::en_base64($salt).
+ &Crypt::Eksblowfish::Bcrypt::en_base64($hash));
+ return $result;
+}
+
#
# Create a new user. User in this case means a lon-capa user.
# The user must either already exist in some authentication realm
@@ -2070,7 +2393,8 @@ sub add_user_handler {
."makeuser";
}
unless ($fperror) {
- my $result=&make_passwd_file($uname,$udom,$umode,$npass, $passfilename);
+ my $result=&make_passwd_file($uname,$udom,$umode,$npass,
+ $passfilename,'makeuser');
&Reply($client,\$result, $userinput); #BUGBUG - could be fail
} else {
&Failure($client, \$fperror, $userinput);
@@ -2131,36 +2455,30 @@ sub change_authentication_handler {
my $passfilename = &password_path($udom, $uname);
if ($passfilename) { # Not allowed to create a new user!!
# If just changing the unix passwd. need to arrange to run
- # passwd since otherwise make_passwd_file will run
- # lcuseradd which fails if an account already exists
- # (to prevent an unscrupulous LONCAPA admin from stealing
- # an existing account by overwriting it as a LonCAPA account).
+ # passwd since otherwise make_passwd_file will fail as
+ # creation of unix authenticated users is no longer supported
+ # except from the command line, when running make_domain_coordinator.pl
if(($oldauth =~/^unix/) && ($umode eq "unix")) {
my $result = &change_unix_password($uname, $npass);
&logthis("Result of password change for $uname: ".$result);
if ($result eq "ok") {
+ &update_passwd_history($uname,$udom,$umode,'changeuserauth');
&Reply($client, \$result);
} else {
&Failure($client, \$result);
}
} else {
- my $result=&make_passwd_file($uname,$udom,$umode,$npass,$passfilename);
+ my $result=&make_passwd_file($uname,$udom,$umode,$npass,
+ $passfilename,'changeuserauth');
#
# If the current auth mode is internal, and the old auth mode was
# unix, or krb*, and the user is an author for this domain,
# re-run manage_permissions for that role in order to be able
# to take ownership of the construction space back to www:www
#
-
-
- if( (($oldauth =~ /^unix/) && ($umode eq "internal")) ||
- (($oldauth =~ /^internal/) && ($umode eq "unix")) ) {
- if(&is_author($udom, $uname)) {
- &Debug(" Need to manage author permissions...");
- &manage_permissions("/$udom/_au", $udom, $uname, "$umode:");
- }
- }
+
+
&Reply($client, \$result, $userinput);
}
@@ -2173,6 +2491,17 @@ sub change_authentication_handler {
}
®ister_handler("changeuserauth", \&change_authentication_handler, 1,1, 0);
+sub update_passwd_history {
+ my ($uname,$udom,$umode,$context) = @_;
+ my $proname=&propath($udom,$uname);
+ my $now = time;
+ if (open(my $fh,">>$proname/passwd.log")) {
+ print $fh "$now:$umode:$context\n";
+ close($fh);
+ }
+ return;
+}
+
#
# Determines if this is the home server for a user. The home server
# for a user will have his/her lon-capa passwd file. Therefore all we need
@@ -2259,9 +2588,8 @@ sub update_resource_handler {
# FIXME: this should use the LWP mechanism, not internal alarms.
alarm(1200);
{
- my $ua=new LWP::UserAgent;
my $request=new HTTP::Request('GET',"$remoteurl");
- $response=$ua->request($request,$transname);
+ $response=&LONCAPA::LWPReq::makerequest($clientname,$request,$transname,\%perlvar,1200,0,1);
}
alarm(0);
if ($response->is_error()) {
@@ -2274,9 +2602,8 @@ sub update_resource_handler {
# FIXME: isn't there an internal LWP mechanism for this?
alarm(120);
{
- my $ua=new LWP::UserAgent;
my $mrequest=new HTTP::Request('GET',$remoteurl.'.meta');
- my $mresponse=$ua->request($mrequest,$fname.'.meta');
+ my $mresponse = &LONCAPA::LWPReq::makerequest($clientname,$mrequest,$fname.'.meta',\%perlvar,120,0,1);
if ($mresponse->is_error()) {
unlink($fname.'.meta');
}
@@ -2351,11 +2678,15 @@ sub fetch_user_file_handler {
my $remoteurl=$clientprotocol.'://'.$clienthost.'/userfiles/'.$fname;
my $response;
Debug("Remote URL : $remoteurl Transfername $transname Destname: $destname");
- alarm(120);
+ alarm(1200);
{
- my $ua=new LWP::UserAgent;
my $request=new HTTP::Request('GET',"$remoteurl");
- $response=$ua->request($request,$transname);
+ my $verifycert = 1;
+ my @machine_ids = &Apache::lonnet::current_machine_ids();
+ if (grep(/^\Q$clientname\E$/,@machine_ids)) {
+ $verifycert = 0;
+ }
+ $response = &LONCAPA::LWPReq::makerequest($clientname,$request,$transname,\%perlvar,1200,$verifycert);
}
alarm(0);
if ($response->is_error()) {
@@ -2424,11 +2755,20 @@ sub remove_user_file_handler {
if (-e $file) {
#
# If the file is a regular file unlink is fine...
- # However it's possible the client wants a dir.
- # removed, in which case rmdir is more approprate:
+ # However it's possible the client wants a dir
+ # removed, in which case rmdir is more appropriate.
+ # Note: rmdir will only remove an empty directory.
#
if (-f $file){
unlink($file);
+ # for html files remove the associated .bak file
+ # which may have been created by the editor.
+ if ($ufile =~ m{^((docs|supplemental)/(?:\d+|default)/\d+(?:|/.+)/)[^/]+\.x?html?$}i) {
+ my $path = $1;
+ if (-e $file.'.bak') {
+ unlink($file.'.bak');
+ }
+ }
} elsif(-d $file) {
rmdir($file);
}
@@ -2791,8 +3131,12 @@ sub newput_user_profile_entry {
foreach my $pair (@pairs) {
my ($key,$value)=split(/=/,$pair);
if (exists($hashref->{$key})) {
- &Failure($client, "key_exists: ".$key."\n",$userinput);
- return 1;
+ if (!&untie_user_hash($hashref)) {
+ &logthis("error: ".($!+0)." untie (GDBM) failed ".
+ "while attempting newput - early out as key exists");
+ }
+ &Failure($client, "key_exists: ".$key."\n",$userinput);
+ return 1;
}
}
@@ -3305,6 +3649,9 @@ sub dump_with_regexp {
# namespace - Name of the database being modified
# rid - Resource keyword to modify.
# what - new value associated with rid.
+# laststore - (optional) version=timestamp
+# for most recent transaction for rid
+# in namespace, when cstore was called
#
# $client - Socket open on the client.
#
@@ -3313,23 +3660,45 @@ sub dump_with_regexp {
# 1 (keep on processing).
# Side-Effects:
# Writes to the client
+# Successful storage will cause either 'ok', or, if $laststore was included
+# in the tail of the request, and the version number for the last transaction
+# is larger than the version in $laststore, delay:$numtrans , where $numtrans
+# is the number of store evevnts recorded for rid in namespace since
+# lonnet::store() was called by the client.
+#
sub store_handler {
my ($cmd, $tail, $client) = @_;
my $userinput = "$cmd:$tail";
-
- my ($udom,$uname,$namespace,$rid,$what) =split(/:/,$tail);
+ chomp($tail);
+ my ($udom,$uname,$namespace,$rid,$what,$laststore) =split(/:/,$tail);
if ($namespace ne 'roles') {
- chomp($what);
my @pairs=split(/\&/,$what);
my $hashref = &tie_user_hash($udom, $uname, $namespace,
&GDBM_WRCREAT(), "S",
"$rid:$what");
if ($hashref) {
my $now = time;
- my @previouskeys=split(/&/,$hashref->{"keys:$rid"});
- my $key;
+ my $numtrans;
+ if ($laststore) {
+ my ($previousversion,$previoustime) = split(/\=/,$laststore);
+ my ($lastversion,$lasttime) = (0,0);
+ $lastversion = $hashref->{"version:$rid"};
+ if ($lastversion) {
+ $lasttime = $hashref->{"$lastversion:$rid:timestamp"};
+ }
+ if (($previousversion) && ($previousversion !~ /\D/)) {
+ if (($lastversion > $previousversion) && ($lasttime >= $previoustime)) {
+ $numtrans = $lastversion - $previousversion;
+ }
+ } elsif ($lastversion) {
+ $numtrans = $lastversion;
+ }
+ if ($numtrans) {
+ $numtrans =~ s/D//g;
+ }
+ }
$hashref->{"version:$rid"}++;
my $version=$hashref->{"version:$rid"};
my $allkeys='';
@@ -3342,7 +3711,11 @@ sub store_handler {
$allkeys.='timestamp';
$hashref->{"$version:keys:$rid"}=$allkeys;
if (&untie_user_hash($hashref)) {
- &Reply($client, "ok\n", $userinput);
+ my $msg = 'ok';
+ if ($numtrans) {
+ $msg = 'delay:'.$numtrans;
+ }
+ &Reply($client, "$msg\n", $userinput);
} else {
&Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
"while attempting store\n", $userinput);
@@ -3858,7 +4231,9 @@ sub put_course_id_hash_handler {
# creationcontext - include courses created in specified context
#
# domcloner - flag to indicate if user can create CCs in course's domain.
-# If so, ability to clone course is automatic.
+# If so, ability to clone course is automatic.
+# hasuniquecode - filter by courses for which a six character unique code has
+# been set.
#
# $client - The socket open on the client.
# Returns:
@@ -3883,7 +4258,7 @@ sub dump_course_id_handler {
my ($udom,$since,$description,$instcodefilter,$ownerfilter,$coursefilter,
$typefilter,$regexp_ok,$rtn_as_hash,$selfenrollonly,$catfilter,$showhidden,
$caller,$cloner,$cc_clone_list,$cloneonly,$createdbefore,$createdafter,
- $creationcontext,$domcloner) =split(/:/,$tail);
+ $creationcontext,$domcloner,$hasuniquecode) =split(/:/,$tail);
my $now = time;
my ($cloneruname,$clonerudom,%cc_clone);
if (defined($description)) {
@@ -3956,6 +4331,9 @@ sub dump_course_id_handler {
} else {
$creationcontext = '.';
}
+ unless ($hasuniquecode) {
+ $hasuniquecode = '.';
+ }
my $unpack = 1;
if ($description eq '.' && $instcodefilter eq '.' && $ownerfilter eq '.' &&
$typefilter eq '.') {
@@ -4044,6 +4422,9 @@ sub dump_course_id_handler {
$selfenroll_end = $items->{'selfenroll_end_date'};
$created = $items->{'created'};
$context = $items->{'context'};
+ if ($hasuniquecode ne '.') {
+ next unless ($items->{'uniquecode'});
+ }
if ($selfenrollonly) {
next if (!$selfenroll_types);
if (($selfenroll_end > 0) && ($selfenroll_end <= $now)) {
@@ -4319,6 +4700,122 @@ sub put_domain_handler {
}
®ister_handler("putdom", \&put_domain_handler, 0, 1, 0);
+# Updates one or more entries in clickers.db file at the domain level
+#
+# Parameters:
+# $cmd - The command that got us here.
+# $tail - Tail of the command (remaining parameters).
+# In this case a colon separated list containing:
+# (a) the domain for which we are updating the entries,
+# (b) the action required -- add or del -- and
+# (c) a &-separated list of entries to add or delete.
+# $client - File descriptor connected to client.
+# Returns
+# 1 - Continue processing.
+# 0 - Requested to exit, caller should shut down.
+# Side effects:
+# reply is written to $client.
+#
+
+
+sub update_clickers {
+ my ($cmd, $tail, $client) = @_;
+
+ my $userinput = "$cmd:$tail";
+ my ($udom,$action,$what) =split(/:/,$tail,3);
+ chomp($what);
+
+ my $hashref = &tie_domain_hash($udom, "clickers", &GDBM_WRCREAT(),
+ "U","$action:$what");
+
+ if (!$hashref) {
+ &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting updateclickers\n", $userinput);
+ return 1;
+ }
+
+ my @pairs=split(/\&/,$what);
+ foreach my $pair (@pairs) {
+ my ($key,$value)=split(/=/,$pair);
+ if ($action eq 'add') {
+ if (exists($hashref->{$key})) {
+ my @newvals = split(/,/,&unescape($value));
+ my @currvals = split(/,/,&unescape($hashref->{$key}));
+ my @merged = sort(keys(%{{map { $_ => 1 } (@newvals,@currvals)}}));
+ $hashref->{$key}=&escape(join(',',@merged));
+ } else {
+ $hashref->{$key}=$value;
+ }
+ } elsif ($action eq 'del') {
+ if (exists($hashref->{$key})) {
+ my %current;
+ map { $current{$_} = 1; } split(/,/,&unescape($hashref->{$key}));
+ map { delete($current{$_}); } split(/,/,&unescape($value));
+ if (keys(%current)) {
+ $hashref->{$key}=&escape(join(',',sort(keys(%current))));
+ } else {
+ delete($hashref->{$key});
+ }
+ }
+ }
+ }
+ if (&untie_user_hash($hashref)) {
+ &Reply( $client, "ok\n", $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)." untie(GDBM) failed ".
+ "while attempting put\n",
+ $userinput);
+ }
+ return 1;
+}
+®ister_handler("updateclickers", \&update_clickers, 0, 1, 0);
+
+
+# Deletes one or more entries in a namespace db file at the domain level
+#
+# Parameters:
+# $cmd - The command that got us here.
+# $tail - Tail of the command (remaining parameters).
+# In this case a colon separated list containing:
+# (a) the domain for which we are deleting the entries,
+# (b) &-separated list of keys to delete.
+# $client - File descriptor connected to client.
+# Returns
+# 1 - Continue processing.
+# 0 - Requested to exit, caller should shut down.
+# Side effects:
+# reply is written to $client.
+#
+
+sub del_domain_handler {
+ my ($cmd,$tail,$client) = @_;
+
+ my $userinput = "$cmd:$tail";
+
+ my ($udom,$namespace,$what)=split(/:/,$tail,3);
+ chomp($what);
+ my $hashref = &tie_domain_hash($udom,$namespace,&GDBM_WRCREAT(),
+ "D", $what);
+ if ($hashref) {
+ my @keys=split(/\&/,$what);
+ foreach my $key (@keys) {
+ delete($hashref->{$key});
+ }
+ if (&untie_user_hash($hashref)) {
+ &Reply($client, "ok\n", $userinput);
+ } else {
+ &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
+ "while attempting deldom\n", $userinput);
+ }
+ } else {
+ &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
+ "while attempting deldom\n", $userinput);
+ }
+ return 1;
+}
+®ister_handler("deldom", \&del_domain_handler, 0, 1, 0);
+
+
# Unencrypted get from the namespace database file at the domain level.
# This function retrieves a keyed item from a specific named database in the
# domain directory.
@@ -5224,13 +5721,58 @@ sub create_auto_enroll_password_handler
®ister_handler("autocreatepassword", \&create_auto_enroll_password_handler,
0, 1, 0);
+sub auto_export_grades_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+ my ($cdom,$cnum,$info,$data) = split(/:/,$tail);
+ my $inforef = &Apache::lonnet::thaw_unescape($info);
+ my $dataref = &Apache::lonnet::thaw_unescape($data);
+ my ($outcome,$result);;
+ eval {
+ local($SIG{__DIE__})='DEFAULT';
+ my %rtnhash;
+ $outcome=&localenroll::export_grades($cdom,$cnum,$inforef,$dataref,\%rtnhash);
+ if ($outcome eq 'ok') {
+ foreach my $key (keys(%rtnhash)) {
+ $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rtnhash{$key}).'&';
+ }
+ $result =~ s/\&$//;
+ }
+ };
+ if (!$@) {
+ if ($outcome eq 'ok') {
+ if ($cipher) {
+ my $cmdlength=length($result);
+ $result.=" ";
+ my $encresult='';
+ for (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {
+ $encresult.= unpack("H16",
+ $cipher->encrypt(substr($result,
+ $encidx,
+ 8)));
+ }
+ &Reply( $client, "enc:$cmdlength:$encresult\n", $userinput);
+ } else {
+ &Failure( $client, "error:no_key\n", $userinput);
+ }
+ } else {
+ &Reply($client, "$outcome\n", $userinput);
+ }
+ } else {
+ &Failure($client,"export_error\n",$userinput);
+ }
+ return 1;
+}
+®ister_handler("autoexportgrades", \&auto_export_grades_handler,
+ 0, 1, 0);
+
# Retrieve and remove temporary files created by/during autoenrollment.
#
# Formal Parameters:
# $cmd - The command that got us dispatched.
# $tail - The tail of the command. In our case this is a colon
# separated list that will be split into:
-# $filename - The name of the file to remove.
+# $filename - The name of the file to retrieve.
# The filename is given as a path relative to
# the LonCAPA temp file directory.
# $client - Socket open on the client.
@@ -5244,7 +5786,12 @@ sub retrieve_auto_file_handler {
my ($filename) = split(/:/, $tail);
my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename;
- if ( (-e $source) && ($filename ne '') ) {
+
+ if ($filename =~m{/\.\./}) {
+ &Failure($client, "refused\n", $userinput);
+ } elsif ($filename !~ /^$LONCAPA::match_domain\_$LONCAPA::match_courseid\_.+_classlist\.xml$/) {
+ &Failure($client, "refused\n", $userinput);
+ } elsif ( (-e $source) && ($filename ne '') ) {
my $reply = '';
if (open(my $fh,$source)) {
while (<$fh>) {
@@ -5276,7 +5823,7 @@ sub crsreq_checks_handler {
my $userinput = "$cmd:$tail";
my $dom = $tail;
my $result;
- my @reqtypes = ('official','unofficial','community');
+ my @reqtypes = ('official','unofficial','community','textbook','placement');
eval {
local($SIG{__DIE__})='DEFAULT';
my %validations;
@@ -5303,19 +5850,20 @@ sub crsreq_checks_handler {
sub validate_crsreq_handler {
my ($cmd, $tail, $client) = @_;
my $userinput = "$cmd:$tail";
- my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist) = split(/:/, $tail);
+ my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist,$customdata) = split(/:/, $tail);
$instcode = &unescape($instcode);
$owner = &unescape($owner);
$crstype = &unescape($crstype);
$inststatuslist = &unescape($inststatuslist);
$instcode = &unescape($instcode);
$instseclist = &unescape($instseclist);
+ my $custominfo = &Apache::lonnet::thaw_unescape($customdata);
my $outcome;
eval {
local($SIG{__DIE__})='DEFAULT';
$outcome = &localenroll::validate_crsreq($dom,$owner,$crstype,
$inststatuslist,$instcode,
- $instseclist);
+ $instseclist,$custominfo);
};
if (!$@) {
&Reply($client, \$outcome, $userinput);
@@ -5326,6 +5874,53 @@ sub validate_crsreq_handler {
}
®ister_handler("autocrsreqvalidation", \&validate_crsreq_handler, 0, 1, 0);
+sub crsreq_update_handler {
+ my ($cmd, $tail, $client) = @_;
+ my $userinput = "$cmd:$tail";
+ my ($cdom,$cnum,$crstype,$action,$ownername,$ownerdomain,$fullname,$title,$code,
+ $accessstart,$accessend,$infohashref) =
+ split(/:/, $tail);
+ $crstype = &unescape($crstype);
+ $action = &unescape($action);
+ $ownername = &unescape($ownername);
+ $ownerdomain = &unescape($ownerdomain);
+ $fullname = &unescape($fullname);
+ $title = &unescape($title);
+ $code = &unescape($code);
+ $accessstart = &unescape($accessstart);
+ $accessend = &unescape($accessend);
+ my $incoming = &Apache::lonnet::thaw_unescape($infohashref);
+ my ($result,$outcome);
+ eval {
+ local($SIG{__DIE__})='DEFAULT';
+ my %rtnhash;
+ $outcome = &localenroll::crsreq_updates($cdom,$cnum,$crstype,$action,
+ $ownername,$ownerdomain,$fullname,
+ $title,$code,$accessstart,$accessend,
+ $incoming,\%rtnhash);
+ if ($outcome eq 'ok') {
+ my @posskeys = qw(createdweb createdmsg createdcustomized createdactions queuedweb queuedmsg formitems reviewweb validationjs onload javascript);
+ foreach my $key (keys(%rtnhash)) {
+ if (grep(/^\Q$key\E/,@posskeys)) {
+ $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rtnhash{$key}).'&';
+ }
+ }
+ $result =~ s/\&$//;
+ }
+ };
+ if (!$@) {
+ if ($outcome eq 'ok') {
+ &Reply($client, \$result, $userinput);
+ } else {
+ &Reply($client, "format_error\n", $userinput);
+ }
+ } else {
+ &Failure($client,"unknown_cmd\n",$userinput);
+ }
+ return 1;
+}
+®ister_handler("autocrsrequpdate", \&crsreq_update_handler, 0, 1, 0);
+
#
# Read and retrieve institutional code format (for support form).
# Formal Parameters:
@@ -5833,12 +6428,13 @@ sub get_request {
#
# Parameters:
# user_input - The request received from the client (lonc).
+#
# Returns:
# true to keep processing, false if caller should exit.
#
sub process_request {
- my ($userinput) = @_; # Easier for now to break style than to
- # fix all the userinput -> user_input.
+ my ($userinput) = @_; # Easier for now to break style than to
+ # fix all the userinput -> user_input.
my $wasenc = 0; # True if request was encrypted.
# ------------------------------------------------------------ See if encrypted
# for command
@@ -5918,6 +6514,49 @@ sub process_request {
Debug("Client not privileged to do this operation");
$ok = 0;
}
+ if ($ok) {
+ if (ref($trust{$command}) eq 'HASH') {
+ my $donechecks;
+ if ($trust{$command}{'anywhere'}) {
+ $donechecks = 1;
+ } elsif ($trust{$command}{'manageronly'}) {
+ unless (&isManager()) {
+ $ok = 0;
+ }
+ $donechecks = 1;
+ } elsif ($trust{$command}{'institutiononly'}) {
+ unless ($clientsameinst) {
+ $ok = 0;
+ }
+ $donechecks = 1;
+ } elsif ($clientsameinst) {
+ $donechecks = 1;
+ }
+ unless ($donechecks) {
+ foreach my $rule (keys(%{$trust{$command}})) {
+ next if ($rule eq 'remote');
+ if ($trust{$command}{$rule}) {
+ if ($clientprohibited{$rule}) {
+ $ok = 0;
+ } else {
+ $ok = 1;
+ $donechecks = 1;
+ last;
+ }
+ }
+ }
+ }
+ unless ($donechecks) {
+ if ($trust{$command}{'remote'}) {
+ if ($clientremoteok) {
+ $ok = 1;
+ } else {
+ $ok = 0;
+ }
+ }
+ }
+ }
+ }
if($ok) {
Debug("Dispatching to handler $command $tail");
@@ -5928,8 +6567,7 @@ sub process_request {
Failure($client, "refused\n", $userinput);
return 1;
}
-
- }
+ }
print $client "unknown_cmd\n";
# -------------------------------------------------------------------- complete
@@ -6033,18 +6671,6 @@ sub lcpasswdstrerror {
}
}
-#
-# Convert an error return code from lcuseradd to a string value:
-#
-sub lcuseraddstrerror {
- my $ErrorCode = shift;
- if(($ErrorCode < 0) || ($ErrorCode > $lastadderror)) {
- return "lcuseradd - Unrecognized error code: ".$ErrorCode;
- } else {
- return $adderrors[$ErrorCode];
- }
-}
-
# grabs exception and records it to log before exiting
sub catchexception {
my ($error)=@_;
@@ -6198,6 +6824,7 @@ sub UpdateHosts {
# will take care of new and changed hosts as connections come into being.
&Apache::lonnet::reset_hosts_info();
+ my %active;
foreach my $child (keys(%children)) {
my $childip = $children{$child};
@@ -6207,15 +6834,62 @@ sub UpdateHosts {
." $child for ip $childip ");
kill('INT', $child);
} else {
+ $active{$child} = $childip;
logthis(' keeping child for ip '
." $childip (pid=$child) ");
}
}
+
+ my %oldconf = %secureconf;
+ my %connchange;
+ if (lonssl::Read_Connect_Config(\%secureconf,\%perlvar) eq 'ok') {
+ logthis(' Reloaded SSL connection rules ');
+ } else {
+ logthis(' Failed to reload SSL connection rules ');
+ }
+ if ((ref($oldconf{'connfrom'}) eq 'HASH') && (ref($secureconf{'connfrom'}) eq 'HASH')) {
+ foreach my $type ('dom','intdom','other') {
+ if ((($oldconf{'connfrom'}{$type} eq 'no') && ($secureconf{'connfrom'}{$type} eq 'req')) ||
+ (($oldconf{'connfrom'}{$type} eq 'req') && ($secureconf{'connfrom'}{$type} eq 'no'))) {
+ $connchange{$type} = 1;
+ }
+ }
+ }
+ if (keys(%connchange)) {
+ foreach my $child (keys(%active)) {
+ my $childip = $active{$child};
+ if ($childip ne '127.0.0.1') {
+ my $childhostname = gethostbyaddr(Socket::inet_aton($childip),AF_INET);
+ if ($childhostname ne '') {
+ my $childlonhost = &Apache::lonnet::get_server_homeID($childhostname);
+ my ($samedom,$sameinst) = &set_client_info($childlonhost);
+ if ($samedom) {
+ if ($connchange{'dom'}) {
+ logthis(' UpdateHosts killing child '
+ ." $child for ip $childip ");
+ kill('INT', $child);
+ }
+ } elsif ($sameinst) {
+ if ($connchange{'intdom'}) {
+ logthis(' UpdateHosts killing child '
+ ." $child for ip $childip ");
+ kill('INT', $child);
+ }
+ } else {
+ if ($connchange{'other'}) {
+ logthis(' UpdateHosts killing child '
+ ." $child for ip $childip ");
+ kill('INT', $child);
+ }
+ }
+ }
+ }
+ }
+ }
ReloadApache;
&status("Finished reloading hosts.tab");
}
-
sub checkchildren {
&status("Checking on the children (sending signals)");
&initnewstatus();
@@ -6450,6 +7124,10 @@ if ($arch eq 'unknown') {
chomp($arch);
}
+unless (lonssl::Read_Connect_Config(\%secureconf,\%perlvar) eq 'ok') {
+ &logthis('No connectionrules table. Will fallback to loncapa.conf');
+}
+
# --------------------------------------------------------------
# Accept connections. When a connection comes in, it is validated
# and if good, a child process is created to process transactions
@@ -6533,9 +7211,26 @@ sub make_new_child {
# my $tmpsnum=0; # Now global
#---------------------------------------------------- kerberos 5 initialization
&Authen::Krb5::init_context();
- unless (($dist eq 'fedora5') || ($dist eq 'fedora4') ||
- ($dist eq 'fedora6') || ($dist eq 'suse9.3') ||
- ($dist eq 'suse12.2') || ($dist eq 'suse12.3')) {
+
+ my $no_ets;
+ if ($dist =~ /^(?:centos|rhes|scientific)(\d+)$/) {
+ if ($1 >= 7) {
+ $no_ets = 1;
+ }
+ } elsif ($dist =~ /^suse(\d+\.\d+)$/) {
+ if (($1 eq '9.3') || ($1 >= 12.2)) {
+ $no_ets = 1;
+ }
+ } elsif ($dist =~ /^sles(\d+)$/) {
+ if ($1 > 11) {
+ $no_ets = 1;
+ }
+ } elsif ($dist =~ /^fedora(\d+)$/) {
+ if ($1 < 7) {
+ $no_ets = 1;
+ }
+ }
+ unless ($no_ets) {
&Authen::Krb5::init_ets();
}
@@ -6563,7 +7258,7 @@ sub make_new_child {
$ConnectionType = "manager";
$clientname = $managers{$outsideip};
}
- my $clientok;
+ my ($clientok,$clientinfoset);
if ($clientrec || $ismanager) {
&status("Waiting for init from $clientip $clientname");
@@ -6580,7 +7275,6 @@ sub make_new_child {
#
# If the remote is attempting a local init... give that a try:
#
- logthis("remotereq: $remotereq");
(my $i, my $inittype, $clientversion) = split(/:/, $remotereq);
# For LON-CAPA 2.9, the client session will have sent its LON-CAPA
# version when initiating the connection. For LON-CAPA 2.8 and older,
@@ -6592,7 +7286,32 @@ sub make_new_child {
# If the connection type is ssl, but I didn't get my
# certificate files yet, then I'll drop back to
# insecure (if allowed).
-
+
+ if ($inittype eq "ssl") {
+ my $context;
+ if ($clientsamedom) {
+ $context = 'dom';
+ if ($secureconf{'connfrom'}{'dom'} eq 'no') {
+ $inittype = "";
+ }
+ } elsif ($clientsameinst) {
+ $context = 'intdom';
+ if ($secureconf{'connfrom'}{'intdom'} eq 'no') {
+ $inittype = "";
+ }
+ } else {
+ $context = 'other';
+ if ($secureconf{'connfrom'}{'other'} eq 'no') {
+ $inittype = "";
+ }
+ }
+ if ($inittype eq '') {
+ &logthis(" Domain config set "
+ ."to no ssl for $clientname (context: $context)"
+ ." -- trying insecure auth");
+ }
+ }
+
if($inittype eq "ssl") {
my ($ca, $cert) = lonssl::CertificateFile;
my $kfile = lonssl::KeyFile;
@@ -6625,7 +7344,7 @@ sub make_new_child {
close $client;
}
} elsif ($inittype eq "ssl") {
- my $key = SSLConnection($client);
+ my $key = SSLConnection($client,$clientname);
if ($key) {
$clientok = 1;
my $cipherkey = pack("H32", $key);
@@ -6640,6 +7359,7 @@ sub make_new_child {
}
} else {
+ $clientinfoset = &set_client_info();
my $ok = InsecureConnection($client);
if($ok) {
$clientok = 1;
@@ -6679,9 +7399,34 @@ sub make_new_child {
# ------------------------------------------------------------ Process requests
my $keep_going = 1;
my $user_input;
- my $clienthost = &Apache::lonnet::hostname($clientname);
- my $clientserverhomeID = &Apache::lonnet::get_server_homeID($clienthost);
- $clienthomedom = &Apache::lonnet::host_domain($clientserverhomeID);
+ unless ($clientinfoset) {
+ $clientinfoset = &set_client_info();
+ }
+ $clientremoteok = 0;
+ unless ($clientsameinst) {
+ $clientremoteok = 1;
+ my $defdom = &Apache::lonnet::host_domain($perlvar{'lonHostID'});
+ %clientprohibited = &get_prohibited($defdom);
+ if ($clientintdom) {
+ my $remsessconf = &get_usersession_config($defdom,'remotesession');
+ if (ref($remsessconf) eq 'HASH') {
+ if (ref($remsessconf->{'remote'}) eq 'HASH') {
+ if (ref($remsessconf->{'remote'}->{'excludedomain'}) eq 'ARRAY') {
+ if (grep(/^\Q$clientintdom\E$/,@{$remsessconf->{'remote'}->{'excludedomain'}})) {
+ $clientremoteok = 0;
+ }
+ }
+ if (ref($remsessconf->{'remote'}->{'includedomain'}) eq 'ARRAY') {
+ if (grep(/^\Q$clientintdom\E$/,@{$remsessconf->{'remote'}->{'includedomain'}})) {
+ $clientremoteok = 1;
+ } else {
+ $clientremoteok = 0;
+ }
+ }
+ }
+ }
+ }
+ }
while(($user_input = get_request) && $keep_going) {
alarm(120);
Debug("Main: Got $user_input\n");
@@ -6697,7 +7442,7 @@ sub make_new_child {
&logthis("WARNING: "
."Rejected client $clientip, closing connection");
}
- }
+ }
# =============================================================================
@@ -6711,6 +7456,60 @@ sub make_new_child {
exit;
}
+
+#
+# Used to determine if a particular client is from the same domain
+# as the current server, or from the same internet domain.
+#
+# Optional input -- the client to check for domain and internet domain.
+# If not specified, defaults to the package variable: $clientname
+#
+# If called in array context will not set package variables, but will
+# instead return an array of two values - (a) true if client is in the
+# same domain as the server, and (b) true if client is in the same internet
+# domain.
+#
+# If called in scalar context, sets package variables for current client:
+#
+# $clienthomedom - LonCAPA domain of homeID for client.
+# $clientsamedom - LonCAPA domain same for this host and client.
+# $clientintdom - LonCAPA "internet domain" for client.
+# $clientsameinst - LonCAPA "internet domain" same for this host & client.
+#
+# returns 1 to indicate package variables have been set for current client.
+#
+
+sub set_client_info {
+ my ($lonhost) = @_;
+ $lonhost ||= $clientname;
+ my $clienthost = &Apache::lonnet::hostname($lonhost);
+ my $clientserverhomeID = &Apache::lonnet::get_server_homeID($clienthost);
+ my $homedom = &Apache::lonnet::host_domain($clientserverhomeID);
+ my $samedom = 0;
+ if ($perlvar{'lonDefDom'} eq $homedom) {
+ $samedom = 1;
+ }
+ my $intdom = &Apache::lonnet::internet_dom($clientserverhomeID);
+ my $sameinst = 0;
+ if ($intdom ne '') {
+ my $internet_names = &Apache::lonnet::get_internet_names($currenthostid);
+ if (ref($internet_names) eq 'ARRAY') {
+ if (grep(/^\Q$intdom\E$/,@{$internet_names})) {
+ $sameinst = 1;
+ }
+ }
+ }
+ if (wantarray) {
+ return ($samedom,$sameinst);
+ } else {
+ $clienthomedom = $homedom;
+ $clientsamedom = $samedom;
+ $clientintdom = $intdom;
+ $clientsameinst = $sameinst;
+ return 1;
+ }
+}
+
#
# Determine if a user is an author for the indicated domain.
#
@@ -6921,7 +7720,18 @@ sub validate_user {
}
if ($howpwd ne 'nouser') {
if($howpwd eq "internal") { # Encrypted is in local password file.
- $validated = (crypt($password, $contentpwd) eq $contentpwd);
+ if (length($contentpwd) == 13) {
+ $validated = (crypt($password,$contentpwd) eq $contentpwd);
+ if ($validated) {
+ my $ncpass = &hash_passwd($domain,$password);
+ if (&rewrite_password_file($domain,$user,"$howpwd:$ncpass")) {
+ &update_passwd_history($user,$domain,$howpwd,'conversion');
+ &logthis("Validated password hashed with bcrypt for $user:$domain");
+ }
+ }
+ } else {
+ $validated = &check_internal_passwd($password,$contentpwd,$domain);
+ }
}
elsif ($howpwd eq "unix") { # User is a normal unix user.
$contentpwd = (getpwnam($user))[1];
@@ -6989,6 +7799,39 @@ sub validate_user {
return $validated;
}
+sub check_internal_passwd {
+ my ($plainpass,$stored,$domain) = @_;
+ my (undef,$method,@rest) = split(/!/,$stored);
+ if ($method eq "bcrypt") {
+ my $result = &hash_passwd($domain,$plainpass,@rest);
+ if ($result ne $stored) {
+ return 0;
+ }
+ # Upgrade to a larger number of rounds if necessary
+ my $defaultcost;
+ my %domconfig =
+ &Apache::lonnet::get_dom('configuration',['password'],$domain);
+ if (ref($domconfig{'password'}) eq 'HASH') {
+ $defaultcost = $domconfig{'password'}{'cost'};
+ }
+ if (($defaultcost eq '') || ($defaultcost =~ /D/)) {
+ $defaultcost = 10;
+ }
+ return 1 unless($rest[0]<$defaultcost);
+ }
+ return 0;
+}
+
+sub get_last_authchg {
+ my ($domain,$user) = @_;
+ my $lastmod;
+ my $logname = &propath($domain,$user).'/passwd.log';
+ if (-e "$logname") {
+ $lastmod = (stat("$logname"))[9];
+ }
+ return $lastmod;
+}
+
sub krb4_authen {
my ($password,$null,$user,$contentpwd) = @_;
my $validated = 0;
@@ -7304,26 +8147,26 @@ sub change_unix_password {
sub make_passwd_file {
- my ($uname,$udom,$umode,$npass,$passfilename)=@_;
+ my ($uname,$udom,$umode,$npass,$passfilename,$action)=@_;
my $result="ok";
if ($umode eq 'krb4' or $umode eq 'krb5') {
{
my $pf = IO::File->new(">$passfilename");
if ($pf) {
print $pf "$umode:$npass\n";
+ &update_passwd_history($uname,$udom,$umode,$action);
} else {
$result = "pass_file_failed_error";
}
}
} elsif ($umode eq 'internal') {
- my $salt=time;
- $salt=substr($salt,6,2);
- my $ncpass=crypt($npass,$salt);
+ my $ncpass = &hash_passwd($udom,$npass);
{
&Debug("Creating internal auth");
my $pf = IO::File->new(">$passfilename");
if($pf) {
- print $pf "internal:$ncpass\n";
+ print $pf "internal:$ncpass\n";
+ &update_passwd_history($uname,$udom,$umode,$action);
} else {
$result = "pass_file_failed_error";
}
@@ -7333,61 +8176,14 @@ sub make_passwd_file {
my $pf = IO::File->new(">$passfilename");
if($pf) {
print $pf "localauth:$npass\n";
+ &update_passwd_history($uname,$udom,$umode,$action);
} else {
$result = "pass_file_failed_error";
}
}
} elsif ($umode eq 'unix') {
- {
- #
- # Don't allow the creation of privileged accounts!!! that would
- # be real bad!!!
- #
- my $uid = getpwnam($uname);
- if((defined $uid) && ($uid == 0)) {
- &logthis(">>>Attempt to create privileged account blocked");
- return "no_priv_account_error\n";
- }
-
- my $execpath ="$perlvar{'lonDaemons'}/"."lcuseradd";
-
- my $lc_error_file = $execdir."/tmp/lcuseradd".$$.".status";
- {
- &Debug("Executing external: ".$execpath);
- &Debug("user = ".$uname.", Password =". $npass);
- my $se = IO::File->new("|$execpath > $perlvar{'lonDaemons'}/logs/lcuseradd.log");
- print $se "$uname\n";
- print $se "$udom\n";
- print $se "$npass\n";
- print $se "$npass\n";
- print $se "$lc_error_file\n"; # Status -> unique file.
- }
- if (-r $lc_error_file) {
- &Debug("Opening error file: $lc_error_file");
- my $error = IO::File->new("< $lc_error_file");
- my $useraddok = <$error>;
- $error->close;
- unlink($lc_error_file);
-
- chomp $useraddok;
-
- if($useraddok > 0) {
- my $error_text = &lcuseraddstrerror($useraddok);
- &logthis("Failed lcuseradd: $error_text");
- $result = "lcuseradd_failed:$error_text";
- } else {
- my $pf = IO::File->new(">$passfilename");
- if($pf) {
- print $pf "unix:\n";
- } else {
- $result = "pass_file_failed_error";
- }
- }
- } else {
- &Debug("Could not locate lcuseradd error: $lc_error_file");
- $result="bug_lcuseradd_no_output_file";
- }
- }
+ &logthis(">>>Attempt to create unix account blocked -- unix auth not available for new users.");
+ $result="no_new_unix_accounts";
} elsif ($umode eq 'none') {
{
my $pf = IO::File->new("> $passfilename");
@@ -7443,16 +8239,46 @@ sub get_usersession_config {
return $usersessionconf;
} else {
my %domconfig = &Apache::lonnet::get_dom('configuration',['usersessions'],$dom);
- if (ref($domconfig{'usersessions'}) eq 'HASH') {
- &Apache::lonnet::do_cache_new($name,$dom,$domconfig{'usersessions'},3600);
- return $domconfig{'usersessions'};
- }
+ &Apache::lonnet::do_cache_new($name,$dom,$domconfig{'usersessions'},3600);
+ return $domconfig{'usersessions'};
}
return;
}
-
-
+sub get_prohibited {
+ my ($dom) = @_;
+ my $name = 'trust';
+ my ($trustconfig,$cached)=&Apache::lonnet::is_cached_new($name,$dom);
+ unless (defined($cached)) {
+ my %domconfig = &Apache::lonnet::get_dom('configuration',['trust'],$dom);
+ &Apache::lonnet::do_cache_new($name,$dom,$domconfig{'trust'},3600);
+ $trustconfig = $domconfig{'trust'};
+ }
+ my %prohibited;
+ if (ref($trustconfig)) {
+ foreach my $prefix (keys(%{$trustconfig})) {
+ if (ref($trustconfig->{$prefix}) eq 'HASH') {
+ my $reject;
+ if (ref($trustconfig->{$prefix}->{'exc'}) eq 'ARRAY') {
+ if (grep(/^\Q$clientintdom\E$/,@{$trustconfig->{$prefix}->{'exc'}})) {
+ $reject = 1;
+ }
+ }
+ if (ref($trustconfig->{$prefix}->{'inc'}) eq 'ARRAY') {
+ if (grep(/^\Q$clientintdom\E$/,@{$trustconfig->{$prefix}->{'inc'}})) {
+ $reject = 0;
+ } else {
+ $reject = 1;
+ }
+ }
+ if ($reject) {
+ $prohibited{$prefix} = 1;
+ }
+ }
+ }
+ }
+ return %prohibited;
+}
sub distro_and_arch {
return $dist.':'.$arch;
@@ -7637,7 +8463,7 @@ Allow for a password to be set.
Make a user.
-=item passwd
+=item changeuserauth
Allow for authentication mechanism and password to be changed.
@@ -7726,6 +8552,10 @@ for each student, defined perhaps by the
Returns usernames corresponding to IDs. (These "IDs" are unique identifiers
for each student, defined perhaps by the institutional Registrar.)
+=item iddel
+
+Deletes one or more ids in a domain's id database.
+
=item tmpput
Accept and store information in temporary space.