--- loncom/xml/lonplot.pm 2001/12/19 19:22:52 1.8
+++ loncom/xml/lonplot.pm 2001/12/20 19:20:43 1.10
@@ -1,7 +1,7 @@
# The LearningOnline Network with CAPA
# Dynamic plot
#
-# $Id: lonplot.pm,v 1.8 2001/12/19 19:22:52 matthew Exp $
+# $Id: lonplot.pm,v 1.10 2001/12/20 19:20:43 matthew Exp $
#
# Copyright Michigan State University Board of Trustees
#
@@ -26,17 +26,44 @@
# http://www.lon-capa.org/
#
# 12/15/01 Matthew
-# 12/18 Matthew
+# 12/18 12/19 12/20 Matthew
package Apache::lonplot;
+
use strict;
+use Apache::File;
use Apache::response;
use Apache::lonxml;
+
use Digest::MD5 qw(md5 md5_hex md5_base64);
sub BEGIN {
&Apache::lonxml::register('Apache::lonplot',('plot'));
}
+##
+## Description of data structures:
+##
+## %plot %key %axis
+## --------------------------
+## height title color
+## width box xmin
+## bgcolor pos xmax
+## fgcolor ymin
+## transparent ymax
+## grid
+## border
+## font
+##
+## @labels: $labels[$i] = \%label
+## %label: text, xpos, ypos, justify
+##
+## @curves: $curves[$i] = \%curve
+## %curve: name, linestyle, ( function | data )
+##
+## $curves[$i]->{'data'} = [ [x1,x2,x3,x4],
+## [y1,y2,y3,y4] ]
+##
+##------------------------------------------------------------
##
## Tests used in checking the validitity of input
##
@@ -47,41 +74,40 @@ my $onoff_test = sub {$_[0]=~/^(on|o
my $key_pos_test = sub {$_[0]=~/^(top|bottom|right|left|outside|below)+$/};
my $sml_test = sub {$_[0]=~/^(small|medium|large)$/};
my $linestyle_test = sub {$_[0]=~/^(lines|linespoints|dots|points|steps)$/};
-my $words_test = sub {$_[0]=~/^((\w+\b*)+$/};
+my $words_test = sub {$_[0]=~/^(\w+ *)+$/};
##
## Default values for attributes of elements
##
my %plot_defaults =
(
- height => {default => 200, test => $int_test },
- width => {default => 200, test => $int_test },
- bgcolor => {default => 'xffffff', test => $color_test},
- fgcolor => {default => 'x000000', test => $color_test},
- transparent => {default => 'off', test => $onoff_test},
- grid => {default => 'off', test => $onoff_test},
- border => {default => 'on', test => $onoff_test},
- font => {default => 'medium', test => $sml_test }
+ height => {default => 200, test => $int_test },
+ width => {default => 200, test => $int_test },
+ bgcolor => {default => 'xffffff', test => $color_test },
+ fgcolor => {default => 'x000000', test => $color_test },
+ transparent => {default => 'off', test => $onoff_test },
+ grid => {default => 'off', test => $onoff_test },
+ border => {default => 'on', test => $onoff_test },
+ font => {default => 'medium', test => $sml_test }
);
my %key_defaults =
(
- title => { default => '', test => $words_test },
- box => { default => 'off', test => $onoff_test },
- pos => { default => 'top right', test => $key_pos_test}
+ title => { default => '', test => $words_test },
+ box => { default => 'off', test => $onoff_test },
+ pos => { default => 'top right', test => $key_pos_test }
);
my %label_defaults =
(
- xpos => {default => 0, test => $real_test },
- ypos => {default => 0, test => $real_test },
+ xpos => {default => 0, test => $real_test },
+ ypos => {default => 0, test => $real_test },
justify => {default => 'left',
- test => sub {$_[0]=~/^(left|right|center)$/}}
+ test => sub {$_[0]=~/^(left|right|center)$/} }
);
my %axis_defaults =
(
color => {default => 'x000000', test => $color_test},
-# thickness => {default => 1, test => $int_test },
xmin => {default => -10.0, test => $real_test },
xmax => {default => 10.0, test => $real_test },
ymin => {default => -10.0, test => $real_test },
@@ -90,9 +116,9 @@ my %axis_defaults =
my %curve_defaults =
(
- color => {default => 'x000000', test => $color_test },
+ color => {default => 'x000000', test => $color_test },
name => {default => 'x000000', test => sub {$_[0]=~/^[\w ]*$/} },
- linestyle => {default => 'lines', test => $linestyle_test }
+ linestyle => {default => 'lines', test => $linestyle_test }
);
##
@@ -101,13 +127,13 @@ my %curve_defaults =
my (%plot,%key,%axis,$title,$xlabel,$ylabel,@labels,@curves);
sub start_plot {
- %plot = ''; %key=''; %axis='';
- $title=''; $xlabel=''; $ylabel='';
- @labels = ''; @curves='';
+ %plot = undef; %key = undef; %axis = undef;
+ $title = undef; $xlabel = undef; $ylabel = undef;
+ $#labels = -1; $#curves = -1;
#
my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
my $result='';
- &Apache::lonxml::register('Apache::plot',
+ &Apache::lonxml::register('Apache::lonplot',
('title','xlabel','ylabel','key','axis','label','curve'));
push (@Apache::lonxml::namespace,'plot');
## Always evaluate the insides of the tags
@@ -115,7 +141,7 @@ sub start_plot {
$inside=&Apache::run::evaluate($inside,$safeeval,$$parstack[-1]);
&Apache::lonxml::newparser($parser,\$inside);
##-------------------------------------------------------
- &get_attributes(\%plot,\%plot_defaults,$parstack,$safeeval,'plot');
+ &get_attributes(\%plot,\%plot_defaults,$parstack,$safeeval,$tagstack);
if ($target eq 'web') {
}
return '';
@@ -134,12 +160,15 @@ sub end_plot {
my $filename = $tmpdir.$ENV{'user.name'}.'_'.$ENV{'user.domain'}.
'_plot.data';
my $usersees=md5_base64($filename.'_'.$ENV{'REMOTE_ADDR'});
+# my $usersees=$filename.'_'.$ENV{'REMOTE_ADDR'};
## Write the plot description to the file
- my $fh=&Apache::File->new('/home/httpd/perl/tmp/'.$realname);
- &write_gnuplot_file($fh);
+ my $fh=Apache::File->new('/home/httpd/perl/tmp/'.$filename);
+ $result .= '';
+ $result .= &write_gnuplot_file($fh);
+ $result .= '
';
## return image tag for the plot
- $result = '![](\"/cgi-bin/plot.cgi?'.$usersees.'"';)
{'text'} = &Apache::lonxml::get_all_text("/label",$$parser[-1]);
+ &get_attributes(\%label,\%label_defaults,$parstack,$safeeval,$tagstack);
+ $label{'text'} = &Apache::lonxml::get_all_text("/label",$$parser[-1]);
+ if (! &$words_test($label{'text'})) {
+ # I should probably warn about it, too.
+ $label{'text'} = 'Illegal text';
+ }
push(@labels,\%label);
if ($target eq 'web') {
# This routine should never return anything.
@@ -248,8 +281,8 @@ sub start_curve {
my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
my $result='';
my %curve;
- &get_attributes($curve,\%curve_defaults,$parstack,$safeeval,$tagstack);
- push (@curves,$curve);
+ &get_attributes(\%curve,\%curve_defaults,$parstack,$safeeval,$tagstack);
+ push (@curves,\%curve);
&Apache::lonxml::register('Apache::lonplot',('function','data'));
push (@Apache::lonxml::namespace,'curve');
if ($target eq 'web') {
@@ -272,9 +305,9 @@ sub end_curve {
sub start_function {
my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
my $result='';
- if (exists($curves[-1]->{'data'}) {
+ if (exists($curves[-1]->{'data'})) {
&Apache::lonxml::warning('Use of precludes use of . The will be omitted in favor of the declaration.');
- delete($curves[-1]->{'data'});
+ delete $curves[-1]->{'data'} ;
}
$curves[-1]->{'function'} =
&Apache::lonxml::get_all_text("/function",$$parser[-1]);
@@ -297,12 +330,14 @@ sub start_data {
my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
my $result='';
if (exists($curves[-1]->{'function'})) {
- &Apache::lonxml::warning('Use of precludes use of . The will be omitted in favor of the declaration.');
+ &Apache::lonxml::warning('Use of precludes use of .'.
+ ' The will be omitted in favor of the '.
+ ' declaration.');
delete($curves[-1]->{'function'});
}
my $datatext = &Apache::lonxml::get_all_text("/data",$$parser[-1]);
- $datatext =~ s/(\s+$|^\s+)//g;
- $datatext =~ s/\s+/ /g;
+ $datatext =~ s/\s+//g; # No whitespace, numbers must be seperated
+ # by commas
if ($datatext !~ /^(([+-]?\d*\.?\d*)[, ]?)+$/) {
&Apache::lonxml::warning('Malformed data: '.$datatext);
$datatext = '';
@@ -310,8 +345,14 @@ sub start_data {
# Need to do some error checking on the @data array -
# make sure it's all numbers and make sure each array
# is of the same length.
- my @data = split /[, ]/,$datatext;
- push( @{$curves[-1]->{'data'}},\@data;
+ my @data = split /,/,$datatext;
+ for (my $i=0;$i<=$#data;$i++) {
+ # Check that it's non-empty
+ # Check that it's a number
+ # Maybe I need a 'debug=on' switch to list the data set
+ # out in a warning?
+ }
+ push @{$curves[-1]->{'data'}},\@data;
if ($target eq 'web') {
# This routine should never return anything.
}
@@ -349,106 +390,115 @@ sub end_axis {
##------------------------------------------------------------------- misc
sub get_attributes{
- %values = %{shift};
- %defaults = %{shift};
- $parstack = shift;
- $safeeval = shift;
- $tag = shift;
+ my $values = shift;
+ my $defaults = shift;
+ my $parstack = shift;
+ my $safeeval = shift;
+ my $tag = shift;
my $attr;
- foreach $attr (keys %defaults) {
- $values{$attr} = &Apache::lonxml::get_param($attr,$parstack,$safeeval);
- if ($values{$attr} eq '' | !defined($values{$attr})) {
- $values{$attr} = $defaults{$attr};
+ foreach $attr (keys %{$defaults}) {
+ $values->{$attr} =
+ &Apache::lonxml::get_param($attr,$parstack,$safeeval);
+ if ($values->{$attr} eq '' | !defined($values->{$attr})) {
+ $values->{$attr} = $defaults->{$attr};
next;
}
- my $test = $defaults{$attr}->{'test'};
- if (! &$test($values{$attr})) {
+ my $test = $defaults->{$attr}->{'test'};
+ if (! &$test($values->{$attr})) {
&Apache::lonxml::warning
($tag.':'.$attr.': Bad value.'.'Replacing your value with : '
- .$defaults{$attr} );
- $values{$attr} = $defaults{$attr};
+ .$defaults->{$attr} );
+ $values->{$attr} = $defaults->{$attr};
+ }
+ return ;
}
- return ;
}
sub write_gnuplot_file {
my $fh = shift;
my $gnuplot_input = '';
+ my $curve;
# Collect all the colors
my @Colors;
push @Colors, $plot{'bgcolor'};
push @Colors, $plot{'fgcolor'};
push @Colors, $axis{'color'};
push @Colors, $axis{'color'};
- foreach $curve (@Curves) {
- push @Colors, ($curve{'color'} ne '' ?
- $curve{'color'} :
+ foreach $curve (@curves) {
+ push @Colors, ($curve->{'color'} ne '' ?
+ $curve->{'color'} :
$plot{'fgcolor'} );
}
# set term
$gnuplot_input .= 'set term gif ';
$gnuplot_input .= 'transparent ' if ($plot{'transparent'} eq 'on');
$gnuplot_input .= $plot{'font'} . ' ';
- $gnuplot_input .= 'size ' . $plot{'width'} . ' ';
- $gnuplot_input .= $plot{'height'} . ' ';
+ $gnuplot_input .= 'size '.$plot{'width'}.','.$plot{'height'}.' ';
$gnuplot_input .= "@Colors\n";
# grid
- $gnuplot_input .= ($plot->{'grid'} eq 'on' ?
- 'set grid\n' :
- '' );
+ $gnuplot_input .= 'set grid'.$/ if ($plot{'grid'} eq 'on');
# border
- $gnuplot_input .= ($plot->{'border'} eq 'on'?
- 'set border\n' :
- 'set noborder\n' ); # title, xlabel, ylabel
+ $gnuplot_input .= ($plot{'border'} eq 'on'?
+ 'set border'.$/ :
+ 'set noborder'.$/ ); # title, xlabel, ylabel
{
- $gnuplot_input .<<"ENDLABELS";
-set title $title->{'text'}
-set xlabel $xlabel->{'text'}
-set ylabel $ylabel->{'text'}
-set xrange $axis->{'xmin'}:$axis->{'xmax'}
-set yrange $axis->{'ymin'}:$axis->{'ymax'}
+ $gnuplot_input .= <<"ENDLABELS";
+set output "-"
+set title "$title"
+set xlabel "$xlabel"
+set ylabel "$ylabel"
+set xrange \[$axis{'xmin'}:$axis{'xmax'}\]
+set yrange \[$axis{'ymin'}:$axis{'ymax'}\]
ENDLABELS
}
# Key
if (defined($key{'pos'})) {
- $gnuplot_input .= 'set key '.$key->{'pos'}.' ';
- $gnuplot_input .= ($key->{'box'} eq 'on' ? 'box ' : 'nobox ');
- if ($key->{'title'} ne '') {
- $gnuplot_input .= 'title "'$key->{'title'}.'"\n';
+ $gnuplot_input .= 'set key '.$key{'pos'}.' ';
+ $gnuplot_input .= ($key{'box'} eq 'on' ? 'box ' : 'nobox ');
+ if ($key{'title'} ne '') {
+ $gnuplot_input .= 'title "'.$key{'title'}.'"'.$/;
} else {
- $gnuplot_input .= '\n';
+ $gnuplot_input .= $/;
}
} else {
- $gnuplot_input .= 'set nokey\n';
+ $gnuplot_input .= 'set nokey'.$/;
}
- # axis
- $gnuplot_input .= 'set xrange ['.$axis{'xmin'}.':'.$axis{'xmin'}.']\n';
- $gnuplot_input .= 'set yrange ['.$axis{'ymin'}.':'.$axis{'ymin'}.']\n';
# labels
+ my $label;
foreach $label (@labels) {
$gnuplot_input .= 'set label "'.$label->{'text'}.'" at '.
- $label->{'x'}.','.$label->{'y'}.'\n';
+ $label->{'xpos'}.','.$label->{'ypos'}.' '.$label->{'justify'}.$/ ;
}
# curves
$gnuplot_input .= 'plot ';
my $datatext = '';
- foreach $curve (@curves) {
+ for (my $i = 0;$i<=$#curves;$i++) {
+ $curve = $curves[$i];
+ $gnuplot_input.= ', ' if ($i > 0);
if (exists($curve->{'function'})) {
- $gnuplot_input.= $curve->{'function'}.' with '.$curve->{'linestyle'};
+ $gnuplot_input.=
+ $curve->{'function'}.' title "'.
+ $curve->{'name'}.'" with '.
+ $curve->{'linestyle'};
} elsif (exists($curve->{'data'})) {
- $gnuplot_input.= '\'-\' with '.$curve->{'linestyle'};
+ $gnuplot_input.= '\'-\' title "'.
+ $curve->{'name'}.'" with '.
+ $curve->{'linestyle'};
my @Data = @{$curve->{'data'}};
- for ($i =0; $i<=$#Data; $i++) {
+ my @Data0 = @{$Data[0]};
+ for (my $i =0; $i<=$#Data0; $i++) {
+ my $dataset;
foreach $dataset (@Data) {
- $datatext .= $dataset[$i] . ' ';
+ $datatext .= $dataset->[$i] . ' ';
}
- $datatext .='\n';
+ $datatext .= $/;
}
- $datatext .='\n';
+ $datatext .=$/;
}
}
- $gnuplot_input .= $datatext;
- print $fh $gnuplot_input;
+ $gnuplot_input .= $/.$datatext;
+ return $gnuplot_input;
+# print $fh $gnuplot_input;
}
1;