--- loncom/xml/lonplot.pm 2003/02/07 22:03:21 1.81 +++ loncom/xml/lonplot.pm 2008/03/19 21:09:09 1.135 @@ -1,7 +1,7 @@ # The LearningOnline Network with CAPA # Dynamic plot # -# $Id: lonplot.pm,v 1.81 2003/02/07 22:03:21 albertel Exp $ +# $Id: lonplot.pm,v 1.135 2008/03/19 21:09:09 faziophi Exp $ # # Copyright Michigan State University Board of Trustees # @@ -25,24 +25,38 @@ # # http://www.lon-capa.org/ # -# 12/15/01 Matthew -# 12/17 12/18 12/19 12/20 12/21 12/27 12/28 12/30 12/31 Matthew -# 01/01/02 Matthew -# 01/02 01/03 01/04 01/07 01/08 01/09 Matthew -# 01/21 02/05 02/06 2/28Matthew package Apache::lonplot; use strict; +use warnings FATAL=>'all'; +no warnings 'uninitialized'; use Apache::File; use Apache::response; use Apache::lonxml; use Apache::edit; +use Apache::lonnet; +use LONCAPA; + + +use vars qw/$weboutputformat $version/; + + BEGIN { - &Apache::lonxml::register('Apache::lonplot',('gnuplot')); + &Apache::lonxml::register('Apache::lonplot',('gnuplot')); + # + # Determine the version of GNUPLOT + $weboutputformat = 'gif'; + my $versionstring = `gnuplot --version 2>/dev/null`; + ($version) = ($versionstring =~ /^gnuplot ([\d.]+)/); + if ($version >= 4) { + $weboutputformat = 'png'; + } + } + ## ## Description of data structures: ## @@ -77,6 +91,12 @@ BEGIN { my $max_str_len = 50; # if a label, title, xlabel, or ylabel text # is longer than this, it will be truncated. +my %linetypes = + ( + solid => 1, + dashed => 0 + ); + my %linestyles = ( lines => 2, # Maybe this will be used in the future @@ -91,6 +111,7 @@ my %linestyles = yerrorbars => [3,4], xyerrorbars => [4,6], boxes => 3, + filledcurves => 2, vector => 4 ); @@ -102,7 +123,7 @@ my $pos_real_test = my $color_test = sub {$_[0]=~s/\s+//g;$_[0]=~/^x[\da-fA-F]{6}$/}; my $onoff_test = sub {$_[0]=~/^(on|off)$/}; my $key_pos_test = sub {$_[0]=~/^(top|bottom|right|left|outside|below| )+$/}; -my $sml_test = sub {$_[0]=~/^(small|medium|large)$/}; +my $sml_test = sub {$_[0]=~/^(\d+|small|medium|large)$/}; my $linestyle_test = sub {exists($linestyles{$_[0]})}; my $words_test = sub {$_[0]=~s/\s+/ /g;$_[0]=~/^([\w~!\@\#\$\%^&\*\(\)-=_\+\[\]\{\}:\;\'<>,\.\/\?\\]+ ?)+$/}; @@ -112,74 +133,48 @@ my $words_test = sub {$_[0]=~s/\s+/ ## ## ################################################################### my @gnuplot_edit_order = - qw/alttag bgcolor fgcolor height width font transparent grid samples border align/; + qw/alttag bgcolor fgcolor height width texwidth fontface font texfont + transparent grid samples + border align plotcolor plottype gridtype lmargin rmargin + tmargin bmargin major_ticscale minor_ticscale boxwidth gridlayer fillstyle + pattern solid/; -my $gnuplot_help_text = <<"ENDPLOTHELP"; -

-The gnuplot tag allows an author to design a plot which can -be created on the fly. This is intended for use in homework problems -where each student needs to see a distinct plot. It can be used in -conjunction with a script tag to generate random plots. -

-A gnuplot tag can contain the following sub-tags: -

-
-
Plot Label -
Allows you to place text at a given (x,y) coordinate on the plot. -
Plot Title -
The title of the plot -
Plot Xlabel -
The label on the horizontal axis of the plot -
Plot Ylabel -
The label on the vertical axis of the plot -
Plot Axes -
allows specification of the x and y ranges displayed in the plot -
Plot Key -
Lists the functions displayed in the plot. -
Plot Curve -
Sets the data used in the plot. -
Plot Tics -
Allows specification of the x and y coordinate 'tics' on the axes. -This is mostly used to adjust the grid lines when a grid is displayed. -
-If you are having trouble with your plot, please read the help -available on Plot Curve. -ENDPLOTHELP +my $margin_choices = ['default',0..20]; my %gnuplot_defaults = ( alttag => { default => 'dynamically generated plot', test => $words_test, - description => 'brief description of the plot', + description => 'Brief description of the plot', edit_type => 'entry', size => '40' }, height => { default => 300, test => $int_test, - description => 'height of image (pixels)', + description => 'Height of image (pixels)', edit_type => 'entry', size => '10' }, width => { default => 400, test => $int_test, - description => 'width of image (pixels)', + description => 'Width of image (pixels)', edit_type => 'entry', size => '10' }, bgcolor => { default => 'xffffff', test => $color_test, - description => 'background color of image (xffffff)', + description => 'Background color of image (xffffff)', edit_type => 'entry', size => '10' }, fgcolor => { default => 'x000000', test => $color_test, - description => 'foreground color of image (x000000)', + description => 'Foreground color of image (x000000)', edit_type => 'entry', size => '10' }, @@ -195,6 +190,19 @@ my %gnuplot_defaults = description => 'Display grid', edit_type => 'onoff' }, + gridlayer => { + default => 'off', + test => $onoff_test, + description => 'Display grid front layer over filled boxes or filled curves', + edit_type => 'onoff' + }, + box_border => { + default => 'noborder', + test => sub {$_[0]=~/^(noborder|border)$/}, + description => 'Draw border for boxes', + edit_type => 'choice', + choices => ['border','noborder'] + }, border => { default => 'on', test => $onoff_test, @@ -202,13 +210,20 @@ my %gnuplot_defaults = edit_type => 'onoff' }, font => { - default => 'medium', + default => '9', test => $sml_test, - description => 'Size of font to use', + description => 'Font size to use in web output (pts)', edit_type => 'choice', - choices => ['small','medium','large'] + choices => [['5','5 (small)'],'6','7','8',['9','9 (medium)'],'10',['11','11 (large)'],'12','15'] }, - samples => { + fontface => { + default => 'sans-serif', + test => sub {$_[0]=~/^(sans-serif|serif|classic)$/}, + description => 'Type of font to use', + edit_type => 'choice', + choices => ['sans-serif','serif', 'classic'] + }, + samples => { default => '100', test => $int_test, description => 'Number of samples for non-data plots', @@ -216,12 +231,117 @@ my %gnuplot_defaults = choices => ['100','200','500','1000','2000','5000'] }, align => { - default => 'center', - test => sub {$_[0]=~/^(left|right|center)$/}, - description => 'alignment for image in html', + default => 'middle', + test => sub {$_[0]=~/^(left|right|middle|center)$/}, + description => 'Alignment for image in HTML', edit_type => 'choice', - choices => ['left','right','center'] - } + choices => ['left','right','middle'] + }, + texwidth => { + default => '93', + test => $int_test, + description => 'Width of plot when printed (mm)', + edit_type => 'entry', + size => '5' + }, + texfont => { + default => '22', + test => $int_test, + description => 'Font size to use in TeX output (pts):', + edit_type => 'choice', + choices => [qw/8 10 12 14 16 18 20 22 24 26 28 30 32 34 36/], + }, + plotcolor => { + default => 'monochrome', + test => sub {$_[0]=~/^(monochrome|color|colour)$/}, + description => 'Color setting for printing:', + edit_type => 'choice', + choices => [qw/monochrome color colour/], + }, + pattern => { + default => '', + test => $int_test, + description => 'Pattern value for boxes:', + edit_type => 'choice', + choices => [0,1,2,3,4,5,6] + }, + solid => { + default => 0, + test => $real_test, + description => 'The density of fill style for boxes', + edit_type => 'entry', + size => '5' + }, + fillstyle => { + default => 'empty', + test => sub {$_[0]=~/^(empty|solid|pattern)$/}, + description => 'Filled style for boxes:', + edit_type => 'choice', + choices => ['empty','solid','pattern'] + }, + plottype => { + default => 'Cartesian', + test => sub {$_[0]=~/^(Polar|Cartesian)$/}, + description => 'Plot type:', + edit_type => 'choice', + choices => ['Cartesian','Polar'] + }, + gridtype => { + default => 'Cartesian', + test => sub {$_[0]=~/^(Polar|Cartesian|Linear-Log|Log-Linear|Log-Log)$/}, + description => 'Grid type:', + edit_type => 'choice', + choices => ['Cartesian','Polar','Linear-Log','Log-Linear','Log-Log'] + }, + lmargin => { + default => 'default', + test => sub {$_[0]=~/^(default|\d+)$/}, + description => 'Left margin width (pts):', + edit_type => 'choice', + choices => $margin_choices, + }, + rmargin => { + default => 'default', + test => sub {$_[0]=~/^(default|\d+)$/}, + description => 'Right margin width (pts):', + edit_type => 'choice', + choices => $margin_choices, + }, + tmargin => { + default => 'default', + test => sub {$_[0]=~/^(default|\d+)$/}, + description => 'Top margin width (pts):', + edit_type => 'choice', + choices => $margin_choices, + }, + bmargin => { + default => 'default', + test => sub {$_[0]=~/^(default|\d+)$/}, + description => 'Bottom margin width (pts):', + edit_type => 'choice', + choices => $margin_choices, + }, + boxwidth => { + default => '', + test => $real_test, + description => 'Width of boxes, default is auto', + edit_type => 'entry', + size => '5' + }, + major_ticscale => { + default => '1', + test => $real_test, + description => 'Size of major tic marks (plot coordinates)', + edit_type => 'entry', + size => '5' + }, + minor_ticscale => { + default => '0.5', + test => $real_test, + description => 'Size of minor tic mark (plot coordinates)', + edit_type => 'entry', + size => '5' + }, ); my %key_defaults = @@ -242,7 +362,7 @@ my %key_defaults = pos => { default => 'top right', test => $key_pos_test, - description => 'position of the key on the plot', + description => 'Position of the key on the plot', edit_type => 'choice', choices => ['top left','top right','bottom left','bottom right', 'outside','below'] @@ -254,14 +374,14 @@ my %label_defaults = xpos => { default => 0, test => $real_test, - description => 'x position of label (graph coordinates)', + description => 'X position of label (graph coordinates)', edit_type => 'entry', size => '10' }, ypos => { default => 0, test => $real_test, - description => 'y position of label (graph coordinates)', + description => 'Y position of label (graph coordinates)', edit_type => 'entry', size => '10' }, @@ -271,166 +391,178 @@ my %label_defaults = description => 'justification of the label text on the plot', edit_type => 'choice', choices => ['left','right','center'] + }, + rotate => { + default => 0, + test => $real_test, + description => 'Rotation of label (degrees)', + edit_type => 'entry', + size => '10', } ); -my @tic_edit_order = ('location','mirror','start','increment','end'); +my @tic_edit_order = ('location','mirror','start','increment','end', + 'minorfreq'); my %tic_defaults = ( location => { default => 'border', test => sub {$_[0]=~/^(border|axis)$/}, - description => 'Location of tick marks', + description => 'Location of major tic marks', edit_type => 'choice', choices => ['border','axis'] }, mirror => { default => 'on', test => $onoff_test, - description => 'mirror ticks on opposite axis?', + description => 'Mirror tics on opposite axis?', edit_type => 'onoff' }, start => { default => '-10.0', test => $real_test, - description => 'Start ticks at', + description => 'Start major tics at', edit_type => 'entry', size => '10' }, increment => { default => '1.0', test => $real_test, - description => 'Place a tick every', + description => 'Place a major tic every', edit_type => 'entry', size => '10' }, end => { default => ' 10.0', test => $real_test, - description => 'Stop ticks at ', + description => 'Stop major tics at ', edit_type => 'entry', size => '10' }, + minorfreq => { + default => '0', + test => $int_test, + description => 'Number of minor tics per major tic mark', + edit_type => 'entry', + size => '10' + }, ); -my @axis_edit_order = ('color','xmin','xmax','ymin','ymax'); +my @axis_edit_order = ('color','xmin','xmax','ymin','ymax','xformat', 'yformat'); my %axis_defaults = ( color => { default => 'x000000', test => $color_test, - description => 'color of grid lines (x000000)', + description => 'Color of grid lines (x000000)', edit_type => 'entry', size => '10' }, xmin => { default => '-10.0', test => $real_test, - description => 'minimum x-value shown in plot', + description => 'Minimum x-value shown in plot', edit_type => 'entry', size => '10' }, xmax => { default => ' 10.0', test => $real_test, - description => 'maximum x-value shown in plot', + description => 'Maximum x-value shown in plot', edit_type => 'entry', size => '10' }, ymin => { default => '-10.0', test => $real_test, - description => 'minimum y-value shown in plot', + description => 'Minimum y-value shown in plot', edit_type => 'entry', size => '10' }, ymax => { default => ' 10.0', test => $real_test, - description => 'maximum y-value shown in plot', + description => 'Maximum y-value shown in plot', edit_type => 'entry', size => '10' - } - ); + }, + xformat => { + default => 'on', + test => sub {$_[0]=~/^(on|off|\d+(f|F|e|E))$/}, + description => 'X-axis number formatting', + edit_type => 'choice', + choices => ['on', 'off', '2e', '2f'], + }, + yformat => { + default => 'on', + test => sub {$_[0]=~/^(on|off|\d+(f|F|e|E))$/}, + description => 'X-axis number formatting', + edit_type => 'choice', + choices => ['on', 'off', '2e', '2f'], + }, -my $curve_help_text = <<"ENDCURVEHELP"; -The curve tag is where you set the data to be plotted by gnuplot. -There are two ways of entering the information: -
-
Curve Data -
Using a data tag you can specify the numbers used to produce -the plot. -

-By default, two data tags will be available in a plot. The -first will specify X coordinates of the data and the second will -give the Y coordinates of the data. When working with a linestyle that -requires more than two data sets, inserting another data tag is -required. Unfortunately, you must make sure the data tags appear -in the order gnuplot expects the data. -

-Specifying the data should usually be done with a perl variable or array, -such as \@Xdata and \@Ydata. You may also specify numerical data seperated -by commas. Again, the order of the data tags is important. The -first tag will be the X data and the second will be the Y data. -

-
Curve Function -
The function tag allows you to specify the curve to be -plotted as a formula that gnuplot can understand. Be careful using this -tag. It is surprisingly easy to give gnuplot a function it cannot deal -with properly. Be explicit: 2*sin(2*3.141592*x/4) will work but -2sin(2*3.141592x/4) will not. If you do not receive any errors in the -gnuplot data but still do not have an image produced, it is likely there -is an error in your function tag. -
-ENDCURVEHELP + ); -my @curve_edit_order = ('color','name','linestyle','pointtype','pointsize'); +my @curve_edit_order = ('color','name','linestyle','linewidth','linetype','pointtype','pointsize','limit'); my %curve_defaults = ( color => { default => 'x000000', test => $color_test, - description => 'color of curve (x000000)', + description => 'Color of curve (x000000)', edit_type => 'entry', size => '10' }, name => { default => '', test => $words_test, - description => 'name of curve to appear in key', + description => 'Name of curve to appear in key', edit_type => 'entry', size => '20' }, linestyle => { default => 'lines', test => $linestyle_test, - description => 'Line style', + description => 'Plot with:', edit_type => 'choice', choices => [keys(%linestyles)] }, -# gnuplots term=gif driver does not handle linewidth :( -# linewidth => { -# default => 1, -# test => $int_test, -# description => 'Line width (may not apply to all line styles)', -# edit_type => 'choice', -# choices => [1,2,3,4,5,6,7,8,9,10] -# }, + linewidth => { + default => 1, + test => $int_test, + description => 'Line width (may not apply to all plot styles)', + edit_type => 'choice', + choices => [1,2,3,4,5,6,7,8,9,10] + }, + linetype => { + default => 'solid', + test => sub {$_[0]=~/^(solid|dashed)$/}, + description => 'Line type (may not apply to all plot styles)', + edit_type => 'choice', + choices => ['solid', 'dashed'] + }, pointsize => { default => 1, test => $pos_real_test, - description => 'point size (may not apply to all line styles)', + description => 'Point size (may not apply to all plot styles)', edit_type => 'entry', size => '5' }, pointtype => { default => 1, test => $int_test, - description => 'point type (may not apply to all line styles)', + description => 'Point type (may not apply to all plot styles)', edit_type => 'choice', choices => [0,1,2,3,4,5,6] - } + }, + limit => { + default => 'closed', + test => sub {$_[0]=~/^(above|below|closed|x1|x2|y1|y2)$/}, + description => 'Point to fill -- for filledcurves', + edit_type => 'choice', + choices => ['above', 'below', 'closed','x1','x2','y1','y2'] + }, ); ################################################################### @@ -438,13 +570,15 @@ my %curve_defaults = ## parsing and edit rendering ## ## ## ################################################################### -my (%plot,%key,%axis,$title,$xlabel,$ylabel,@labels,@curves,%xtics,%ytics); + +undef %Apache::lonplot::plot; +my (%key,%axis,$title,$xlabel,$ylabel,@labels,@curves,%xtics,%ytics); sub start_gnuplot { - %plot = (); %key = (); %axis = (); - $title = undef; $xlabel = undef; $ylabel = undef; - $#labels = -1; $#curves = -1; - %xtics = (); %ytics = (); + undef(%Apache::lonplot::plot); undef(%key); undef(%axis); + undef($title); undef($xlabel); undef($ylabel); + undef(@labels); undef(@curves); + undef(%xtics); undef(%ytics); # my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; my $result=''; @@ -453,14 +587,14 @@ sub start_gnuplot { 'xtics','ytics')); push (@Apache::lonxml::namespace,'lonplot'); if ($target eq 'web' || $target eq 'tex') { - &get_attributes(\%plot,\%gnuplot_defaults,$parstack,$safeeval, + &get_attributes(\%Apache::lonplot::plot,\%gnuplot_defaults,$parstack,$safeeval, $tagstack->[-1]); } elsif ($target eq 'edit') { $result .= &Apache::edit::tag_start($target,$token,'GnuPlot'); - $result .= &make_javascript(); - $result .= &help_win($gnuplot_help_text); $result .= &edit_attributes($target,$token,\%gnuplot_defaults, - \@gnuplot_edit_order); + \@gnuplot_edit_order) + .&Apache::edit::end_row() + .&Apache::edit::start_spanning_row(); } elsif ($target eq 'modified') { my $constructtag=&Apache::edit::get_new_args ($token,$parstack,$safeeval,keys(%gnuplot_defaults)); @@ -480,7 +614,7 @@ sub end_gnuplot { my $randnumber; # need to call rand everytime start_script would evaluate, as the # safe space rand number generator and the global rand generator - # are not seperate + # are not separate if ($target eq 'web' || $target eq 'tex' || $target eq 'grade' || $target eq 'answer') { $randnumber=int(rand(1000)); @@ -490,23 +624,28 @@ sub end_gnuplot { ## ## Determine filename my $tmpdir = '/home/httpd/perl/tmp/'; - my $filename = $ENV{'user.name'}.'_'.$ENV{'user.domain'}. + my $filename = $env{'user.name'}.'_'.$env{'user.domain'}. '_'.time.'_'.$$.$randnumber.'_plot'; ## Write the plot description to the file &write_gnuplot_file($tmpdir,$filename,$target); - $filename = &Apache::lonnet::escape($filename); + $filename = &escape($filename); ## return image tag for the plot if ($target eq 'web') { $result .= <<"ENDIMAGE"; -$plot{'alttag'} +$Apache::lonplot::plot{'alttag'} ENDIMAGE } elsif ($target eq 'tex') { - &Apache::lonnet::ssi("/cgi-bin/plot.gif?file=$filename.data&output=eps"); - $result = '\graphicspath{{/home/httpd/perl/tmp/}}\includegraphics{'.&Apache::lonnet::unescape($filename).'.eps}'; + &Apache::lonxml::debug(" gnuplot wid = $Apache::lonplot::plot{'width'}"); + &Apache::lonxml::debug(" gnuplot ht = $Apache::lonplot::plot{'height'}"); + #might be inside the safe space, register the URL for later + &Apache::lonxml::register_ssi("/cgi-bin/plot.gif?file=$filename.data&output=eps"); + $result = "%DYNAMICIMAGE:$Apache::lonplot::plot{'width'}:$Apache::lonplot::plot{'height'}:$Apache::lonplot::plot{'texwidth'}\n"; + $result .= '\graphicspath{{/home/httpd/perl/tmp/}}'."\n"; + $result .= '\includegraphics[width='.$Apache::lonplot::plot{'texwidth'}.' mm]{'.&unescape($filename).'.eps}'; } } elsif ($target eq 'edit') { $result.=&Apache::edit::tag_end($target,$token); @@ -577,6 +716,51 @@ sub end_ytics { return $result; } +##-----------------------------------------------------------------font +my %font_properties = + ( + 'classic' => { + face => 'classic', + file => 'DejaVuSansMono-Bold', + printname => 'Helvetica', + tex_no_file => 1, + }, + 'sans-serif' => { + face => 'sans-serif', + file => 'DejaVuSans', + printname => 'DejaVuSans', + }, + 'serif' => { + face => 'serif', + file => 'DejaVuSerif', + printname => 'DejaVuSerif', + }, + ); + +sub get_font { + my ($target) = @_; + my ($size, $selected_font); + + if ( $Apache::lonplot::plot{'font'} =~ /^(small|medium|large)/) { + $selected_font = $font_properties{'classic'}; + if ( $Apache::lonplot::plot{'font'} eq 'small') { + $size = '5'; + } elsif ( $Apache::lonplot::plot{'font'} eq 'medium') { + $size = '9'; + } elsif ( $Apache::lonplot::plot{'font'} eq 'large') { + $size = '11'; + } else { + $size = '9'; + } + } else { + $size = $Apache::lonplot::plot{'font'}; + $selected_font = $font_properties{$Apache::lonplot::plot{'fontface'}}; + } + if ($target eq 'tex' && defined($Apache::lonplot::plot{'texfont'})) { + $size = $Apache::lonplot::plot{'texfont'}; + } + return ($size, $selected_font); +} ##----------------------------------------------------------------- key sub start_key { @@ -608,27 +792,115 @@ sub end_key { return $result; } +sub parse_label { + my ($target,$text) = @_; + my $parser=HTML::LCParser->new(\$text); + my $result; + while (my $token=$parser->get_token) { + if ($token->[0] eq 'S') { + if ($token->[1] eq 'sub') { + $result .= '_{'; + } elsif ($token->[1] eq 'sup') { + $result .= '^{'; + } else { + $result .= $token->[4]; + } + } elsif ($token->[0] eq 'E') { + if ($token->[1] eq 'sub' + || $token->[1] eq 'sup') { + $result .= '}'; + } else { + $result .= $token->[2]; + } + } elsif ($token->[0] eq 'T') { + $result .= &replace_entities($target,$token->[1]); + } + } + return $result; +} + + +my %lookup = + ('(Alpha|#913)' => {'tex' => '{/Symbol A}', 'web' => "\x{391}"}, + '(Beta|#914)' => {'tex' => '{/Symbol B}', 'web' => "\x{392}"}, + '(Chi|#935)' => {'tex' => '{/Symbol C}', 'web' => "\x{3A7}"}, + '(Delta|#916)' => {'tex' => '{/Symbol D}', 'web' => "\x{394}"}, + '(Epsilon|#917)' => {'tex' => '{/Symbol E}', 'web' => "\x{395}"}, + '(Phi|#934)' => {'tex' => '{/Symbol F}', 'web' => "\x{3A6}"}, + '(Gamma|#915)' => {'tex' => '{/Symbol G}', 'web' => "\x{393}"}, + '(Eta|#919)' => {'tex' => '{/Symbol H}', 'web' => "\x{397}"}, + '(Iota|#921)' => {'tex' => '{/Symbol I}', 'web' => "\x{399}"}, + '(Kappa|#922)' => {'tex' => '{/Symbol K}', 'web' => "\x{39A}"}, + '(Lambda|#923)' => {'tex' => '{/Symbol L}', 'web' => "\x{39B}"}, + '(Mu|#924)' => {'tex' => '{/Symbol M}', 'web' => "\x{39C}"}, + '(Nu|#925)' => {'tex' => '{/Symbol N}', 'web' => "\x{39D}"}, + '(Omicron|#927)' => {'tex' => '{/Symbol O}', 'web' => "\x{39F}"}, + '(Pi|#928)' => {'tex' => '{/Symbol P}', 'web' => "\x{3A0}"}, + '(Theta|#920)' => {'tex' => '{/Symbol Q}', 'web' => "\x{398}"}, + '(Rho|#929)' => {'tex' => '{/Symbol R}', 'web' => "\x{3A1}"}, + '(Sigma|#931)' => {'tex' => '{/Symbol S}', 'web' => "\x{3A3}"}, + '(Tau|#932)' => {'tex' => '{/Symbol T}', 'web' => "\x{3A4}"}, + '(Upsilon|#933)' => {'tex' => '{/Symbol U}', 'web' => "\x{3A5}"}, + '(Omega|#937)' => {'tex' => '{/Symbol W}', 'web' => "\x{3A9}"}, + '(Xi|#926)' => {'tex' => '{/Symbol X}', 'web' => "\x{39E}"}, + '(Psi|#936)' => {'tex' => '{/Symbol Y}', 'web' => "\x{3A8}"}, + '(Zeta|#918)' => {'tex' => '{/Symbol Z}', 'web' => "\x{396}"}, + '(alpha|#945)' => {'tex' => '{/Symbol a}', 'web' => "\x{3B1}"}, + '(beta|#946)' => {'tex' => '{/Symbol b}', 'web' => "\x{3B2}"}, + '(chi|#967)' => {'tex' => '{/Symbol c}', 'web' => "\x{3C7}"}, + '(delta|#948)' => {'tex' => '{/Symbol d}', 'web' => "\x{3B4}"}, + '(epsilon|#949)' => {'tex' => '{/Symbol e}', 'web' => "\x{3B5}"}, + '(phi|#966)' => {'tex' => '{/Symbol f}', 'web' => "\x{3C6}"}, + '(gamma|#947)' => {'tex' => '{/Symbol g}', 'web' => "\x{3B3}"}, + '(eta|#951)' => {'tex' => '{/Symbol h}', 'web' => "\x{3B7}"}, + '(iota|#953)' => {'tex' => '{/Symbol i}', 'web' => "\x{3B9}"}, + '(kappa|#954)' => {'tex' => '{/Symbol k}', 'web' => "\x{3BA}"}, + '(lambda|#955)' => {'tex' => '{/Symbol k}', 'web' => "\x{3BB}"}, + '(mu|#956)' => {'tex' => '{/Symbol m}', 'web' => "\x{3BC}"}, + '(nu|#957)' => {'tex' => '{/Symbol n}', 'web' => "\x{3BD}"}, + '(omicron|#959)' => {'tex' => '{/Symbol o}', 'web' => "\x{3BF}"}, + '(pi|#960)' => {'tex' => '{/Symbol p}', 'web' => "\x{3C0}"}, + '(theta|#952)' => {'tex' => '{/Symbol q}', 'web' => "\x{3B8}"}, + '(rho|#961)' => {'tex' => '{/Symbol r}', 'web' => "\x{3C1}"}, + '(sigma|#963)' => {'tex' => '{/Symbol s}', 'web' => "\x{3C3}"}, + '(tau|#964)' => {'tex' => '{/Symbol t}', 'web' => "\x{3C4}"}, + '(upsilon|#965)' => {'tex' => '{/Symbol u}', 'web' => "\x{3C5}"}, + '(omega|#969)' => {'tex' => '{/Symbol w}', 'web' => "\x{3C9}"}, + '(xi|#958)' => {'tex' => '{/Symbol x}', 'web' => "\x{3BE}"}, + '(psi|#968)' => {'tex' => '{/Symbol y}', 'web' => "\x{3C8}"}, + '(zeta|#950)' => {'tex' => '{/Symbol z}', 'web' => "\x{3B6}"}, + ); + + +sub replace_entities { + my ($target,$text) = @_; + $text =~ s{([_^~\{\}]|\\\\)}{\\\\$1}g; + while (my ($re, $replace) = each(%lookup)) { + $text =~ s/&$re;/$replace->{$target}/g; + } + $text =~ s{(&)}{\\\\$1}g; + return $text; +} + ##------------------------------------------------------------------- title sub start_title { my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; my $result=''; if ($target eq 'web' || $target eq 'tex') { - $title = &Apache::lonxml::get_all_text("/title",$parser); + $title = &Apache::lonxml::get_all_text("/title",$parser,$style); $title=&Apache::run::evaluate($title,$safeeval,$$parstack[-1]); $title =~ s/\n/ /g; if (length($title) > $max_str_len) { $title = substr($title,0,$max_str_len); } + $title = &parse_label($target,$title); } elsif ($target eq 'edit') { $result.=&Apache::edit::tag_start($target,$token,'Plot Title'); - my $text=&Apache::lonxml::get_all_text("/title",$parser); - $result.=&Apache::edit::end_row(). - &Apache::edit::start_spanning_row(). - &Apache::edit::editline('',$text,'',60); + my $text=&Apache::lonxml::get_all_text("/title",$parser,$style); + $result.=&Apache::edit::editline('',$text,'',60); } elsif ($target eq 'modified') { - my $text=$$parser[-1]->get_text("/title"); $result.=&Apache::edit::rebuild_tag($token); - $result.=&Apache::edit::modifiedfield($token); + $result.=&Apache::edit::modifiedfield("/title",$parser); } return $result; } @@ -647,22 +919,20 @@ sub start_xlabel { my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; my $result=''; if ($target eq 'web' || $target eq 'tex') { - $xlabel = &Apache::lonxml::get_all_text("/xlabel",$parser); + $xlabel = &Apache::lonxml::get_all_text("/xlabel",$parser,$style); $xlabel=&Apache::run::evaluate($xlabel,$safeeval,$$parstack[-1]); $xlabel =~ s/\n/ /g; if (length($xlabel) > $max_str_len) { $xlabel = substr($xlabel,0,$max_str_len); } + $xlabel = &parse_label($target,$xlabel); } elsif ($target eq 'edit') { $result.=&Apache::edit::tag_start($target,$token,'Plot Xlabel'); - my $text=&Apache::lonxml::get_all_text("/xlabel",$parser); - $result.=&Apache::edit::end_row(). - &Apache::edit::start_spanning_row(). - &Apache::edit::editline('',$text,'',60); + my $text=&Apache::lonxml::get_all_text("/xlabel",$parser,$style); + $result.=&Apache::edit::editline('',$text,'',60); } elsif ($target eq 'modified') { - my $text=$$parser[-1]->get_text("/xlabel"); $result.=&Apache::edit::rebuild_tag($token); - $result.=&Apache::edit::modifiedfield($token); + $result.=&Apache::edit::modifiedfield("/xlabel",$parser); } return $result; } @@ -682,22 +952,20 @@ sub start_ylabel { my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; my $result=''; if ($target eq 'web' || $target eq 'tex') { - $ylabel = &Apache::lonxml::get_all_text("/ylabel",$parser); + $ylabel = &Apache::lonxml::get_all_text("/ylabel",$parser,$style); $ylabel = &Apache::run::evaluate($ylabel,$safeeval,$$parstack[-1]); $ylabel =~ s/\n/ /g; if (length($ylabel) > $max_str_len) { $ylabel = substr($ylabel,0,$max_str_len); } + $ylabel = &parse_label($target,$ylabel); } elsif ($target eq 'edit') { $result .= &Apache::edit::tag_start($target,$token,'Plot Ylabel'); - my $text = &Apache::lonxml::get_all_text("/ylabel",$parser); - $result .= &Apache::edit::end_row(). - &Apache::edit::start_spanning_row(). - &Apache::edit::editline('',$text,'',60); + my $text = &Apache::lonxml::get_all_text("/ylabel",$parser,$style); + $result .= &Apache::edit::editline('',$text,'',60); } elsif ($target eq 'modified') { - my $text=$$parser[-1]->get_text("/ylabel"); $result.=&Apache::edit::rebuild_tag($token); - $result.=&Apache::edit::modifiedfield($token); + $result.=&Apache::edit::modifiedfield("/ylabel",$parser); } return $result; } @@ -720,16 +988,16 @@ sub start_label { my %label; &get_attributes(\%label,\%label_defaults,$parstack,$safeeval, $tagstack->[-1]); - my $text = &Apache::lonxml::get_all_text("/label",$parser); + my $text = &Apache::lonxml::get_all_text("/label",$parser,$style); $text = &Apache::run::evaluate($text,$safeeval,$$parstack[-1]); $text =~ s/\n/ /g; $text = substr($text,0,$max_str_len) if (length($text) > $max_str_len); - $label{'text'} = $text; + $label{'text'} = &parse_label($target,$text); push(@labels,\%label); } elsif ($target eq 'edit') { $result .= &Apache::edit::tag_start($target,$token,'Plot Label'); $result .= &edit_attributes($target,$token,\%label_defaults); - my $text = &Apache::lonxml::get_all_text("/label",$parser); + my $text = &Apache::lonxml::get_all_text("/label",$parser,$style); $result .= &Apache::edit::end_row(). &Apache::edit::start_spanning_row(). &Apache::edit::editline('',$text,'',60); @@ -737,8 +1005,7 @@ sub start_label { &Apache::edit::get_new_args ($token,$parstack,$safeeval,keys(%label_defaults)); $result.=&Apache::edit::rebuild_tag($token); - my $text=$$parser[-1]->get_text("/label"); - $result.=&Apache::edit::modifiedfield($token); + $result.=&Apache::edit::modifiedfield("/label",$parser); } return $result; } @@ -766,15 +1033,16 @@ sub start_curve { push (@curves,\%curve); } elsif ($target eq 'edit') { $result .= &Apache::edit::tag_start($target,$token,'Curve'); - $result .= &help_win($curve_help_text); $result .= &edit_attributes($target,$token,\%curve_defaults, - \@curve_edit_order); + \@curve_edit_order) + .&Apache::edit::end_row() + .&Apache::edit::start_spanning_row(); + } elsif ($target eq 'modified') { my $constructtag=&Apache::edit::get_new_args ($token,$parstack,$safeeval,keys(%curve_defaults)); if ($constructtag) { $result = &Apache::edit::rebuild_tag($token); - $result.= &Apache::edit::handle_insert(); } } return $result; @@ -798,22 +1066,24 @@ sub start_function { my $result=''; if ($target eq 'web' || $target eq 'tex') { if (exists($curves[-1]->{'data'})) { - &Apache::lonxml::warning('Use of precludes use of . The will be omitted in favor of the declaration.'); + &Apache::lonxml::warning + ('Use of the curve function tag precludes use of '. + ' the curve data tag. '. + 'The curve data tag will be omitted in favor of the '. + 'curve function declaration.'); delete $curves[-1]->{'data'} ; } - my $function = &Apache::lonxml::get_all_text("/function",$parser); + my $function = &Apache::lonxml::get_all_text("/function",$parser, + $style); $function = &Apache::run::evaluate($function,$safeeval,$$parstack[-1]); $curves[-1]->{'function'} = $function; } elsif ($target eq 'edit') { $result .= &Apache::edit::tag_start($target,$token,'Gnuplot compatible curve function'); - my $text = &Apache::lonxml::get_all_text("/function",$parser); - $result .= &Apache::edit::end_row(). - &Apache::edit::start_spanning_row(). - &Apache::edit::editline('',$text,'',60); + my $text = &Apache::lonxml::get_all_text("/function",$parser,$style); + $result .= &Apache::edit::editline('',$text,'',60); } elsif ($target eq 'modified') { $result.=&Apache::edit::rebuild_tag($token); - my $text=$$parser[-1]->get_text("/function"); - $result.=&Apache::edit::modifiedfield($token); + $result.=&Apache::edit::modifiedfield("/function",$parser); } return $result; } @@ -834,12 +1104,14 @@ sub start_data { my $result=''; if ($target eq 'web' || $target eq 'tex') { if (exists($curves[-1]->{'function'})) { - &Apache::lonxml::warning('Use of precludes use of .'. - '. The will be omitted in favor of '. - 'the declaration.'); + &Apache::lonxml::warning + ('Use of the curve function tag precludes use of '. + ' the curve data tag. '. + 'The curve function tag will be omitted in favor of the '. + 'curve data declaration.'); delete($curves[-1]->{'function'}); } - my $datatext = &Apache::lonxml::get_all_text("/data",$parser); + my $datatext = &Apache::lonxml::get_all_text("/data",$parser,$style); $datatext=&Apache::run::evaluate($datatext,$safeeval,$$parstack[-1]); # Deal with cases where we're given an array... if ($datatext =~ /^\@/) { @@ -853,21 +1125,21 @@ sub start_data { my @data; if ($datatext =~ /,/) { # comma deliminated @data = split /,/,$datatext; - } else { # Assume it's space seperated. + } else { # Assume it's space separated. @data = split / /,$datatext; } for (my $i=0;$i<=$#data;$i++) { # Check that it's non-empty if (! defined($data[$i])) { &Apache::lonxml::warning( - 'undefined value. Replacing with '. + 'undefined curve data value. Replacing with '. ' pi/e = 1.15572734979092'); $data[$i] = 1.15572734979092; } # Check that it's a number if (! &$real_test($data[$i]) & ! &$int_test($data[$i])) { &Apache::lonxml::warning( - 'Bad value of '.$data[$i].' Replacing with '. + 'Bad curve data value of '.$data[$i].' Replacing with '. ' pi/e = 1.15572734979092'); $data[$i] = 1.15572734979092; } @@ -882,14 +1154,11 @@ sub start_data { push @{$curves[-1]->{'data'}},\@data; } elsif ($target eq 'edit') { $result .= &Apache::edit::tag_start($target,$token,'Comma or space deliminated curve data'); - my $text = &Apache::lonxml::get_all_text("/data",$parser); - $result .= &Apache::edit::end_row(). - &Apache::edit::start_spanning_row(). - &Apache::edit::editline('',$text,'',60); + my $text = &Apache::lonxml::get_all_text("/data",$parser,$style); + $result .= &Apache::edit::editline('',$text,'',60); } elsif ($target eq 'modified') { $result.=&Apache::edit::rebuild_tag($token); - my $text=$$parser[-1]->get_text("/data"); - $result.=&Apache::edit::modifiedfield($token); + $result.=&Apache::edit::modifiedfield("/data",$parser); } return $result; } @@ -955,8 +1224,13 @@ sub set_defaults { sub get_attributes{ my ($values,$defaults,$parstack,$safeeval,$tag) = @_; foreach my $attr (keys(%{$defaults})) { - $values->{$attr} = - &Apache::lonxml::get_param($attr,$parstack,$safeeval); + if ($attr eq 'texwidth' || $attr eq 'texfont') { + $values->{$attr} = + &Apache::lonxml::get_param($attr,$parstack,$safeeval,undef,1); + } else { + $values->{$attr} = + &Apache::lonxml::get_param($attr,$parstack,$safeeval); + } if ($values->{$attr} eq '' | !defined($values->{$attr})) { $values->{$attr} = $defaults->{$attr}->{'default'}; next; @@ -975,45 +1249,139 @@ sub get_attributes{ ##------------------------------------------------------- write_gnuplot_file sub write_gnuplot_file { my ($tmpdir,$filename,$target)= @_; + my ($fontsize, $font_properties) = &get_font($target); my $gnuplot_input = ''; my $curve; + # + # Check to be sure we do not have any empty curves + my @curvescopy; + foreach my $curve (@curves) { + if (exists($curve->{'function'})) { + if ($curve->{'function'} !~ /^\s*$/) { + push(@curvescopy,$curve); + } + } elsif (exists($curve->{'data'})) { + foreach my $data (@{$curve->{'data'}}) { + if (scalar(@$data) > 0) { + push(@curvescopy,$curve); + last; + } + } + } + } + @curves = @curvescopy; # Collect all the colors my @Colors; - push @Colors, $plot{'bgcolor'}; - push @Colors, $plot{'fgcolor'}; - push @Colors, (defined($axis{'color'})?$axis{'color'}:$plot{'fgcolor'}); + push @Colors, $Apache::lonplot::plot{'bgcolor'}; + push @Colors, $Apache::lonplot::plot{'fgcolor'}; + push @Colors, (defined($axis{'color'})?$axis{'color'}:$Apache::lonplot::plot{'fgcolor'}); foreach $curve (@curves) { push @Colors, ($curve->{'color'} ne '' ? $curve->{'color'} : - $plot{'fgcolor'} ); + $Apache::lonplot::plot{'fgcolor'} ); } # set term if ($target eq 'web') { - $gnuplot_input .= 'set term gif '; - $gnuplot_input .= 'transparent ' if ($plot{'transparent'} eq 'on'); - $gnuplot_input .= $plot{'font'} . ' '; - $gnuplot_input .= 'size '.$plot{'width'}.','.$plot{'height'}.' '; + $gnuplot_input .= 'set terminal png enhanced nocrop '; + $gnuplot_input .= 'transparent ' if ($Apache::lonplot::plot{'transparent'} eq 'on'); + $gnuplot_input .= 'font "'.$Apache::lonnet::perlvar{'lonFontsDir'}. + '/'.$font_properties->{'file'}.'.ttf" '; + $gnuplot_input .= $fontsize; + $gnuplot_input .= ' size '.$Apache::lonplot::plot{'width'}.','.$Apache::lonplot::plot{'height'}.' '; $gnuplot_input .= "@Colors\n"; # set output $gnuplot_input .= "set output\n"; } elsif ($target eq 'tex') { - $gnuplot_input .= "set term postscript eps monochrome solid\n"; - $gnuplot_input .= "set output \"/home/httpd/perl/tmp/". - &Apache::lonnet::unescape($filename).".eps\"\n"; + $gnuplot_input .= "set term postscript eps enhanced $Apache::lonplot::plot{'plotcolor'} solid "; + if (!$font_properties->{'tex_no_file'}) { + $gnuplot_input .= + 'fontfile "'.$Apache::lonnet::perlvar{'lonFontsDir'}. + '/'.$font_properties->{'file'}.'.pfb" '; + } + $gnuplot_input .= ' "'.$font_properties->{'printname'}.'" '; + $gnuplot_input .= $fontsize; + $gnuplot_input .= "\nset output \"/home/httpd/perl/tmp/". + &unescape($filename).".eps\"\n"; + } + # cartesian or polar plot? + if (lc($Apache::lonplot::plot{'plottype'}) eq 'polar') { + $gnuplot_input .= 'set polar'.$/; + } else { + # Assume Cartesian + } + # cartesian or polar grid? + if (lc($Apache::lonplot::plot{'gridtype'}) eq 'polar') { + $gnuplot_input .= 'set grid polar'.$/; + } elsif (lc($Apache::lonplot::plot{'gridtype'}) eq 'linear-log') { + $gnuplot_input .= 'set logscale x'.$/; + } elsif (lc($Apache::lonplot::plot{'gridtype'}) eq 'log-linear') { + $gnuplot_input .= 'set logscale y'.$/; + } elsif (lc($Apache::lonplot::plot{'gridtype'}) eq 'log-log') { + $gnuplot_input .= 'set logscale x'.$/; + $gnuplot_input .= 'set logscale y'.$/; + } else { + # Assume Cartesian + } + # solid or pattern for boxes? + if (lc($Apache::lonplot::plot{'fillstyle'}) eq 'solid') { + $gnuplot_input .= 'set style fill solid '. + $Apache::lonplot::plot{'solid'}.$Apache::lonplot::plot{'box_border'}.$/; + } elsif (lc($Apache::lonplot::plot{'fillstyle'}) eq 'pattern') { + $gnuplot_input .= 'set style fill pattern '.$Apache::lonplot::plot{'pattern'}.$Apache::lonplot::plot{'box_border'}.$/; + } elsif (lc($Apache::lonplot::plot{'fillstyle'}) eq 'empty') { + } + # margin + if (lc($Apache::lonplot::plot{'lmargin'}) ne 'default') { + $gnuplot_input .= 'set lmargin '.$Apache::lonplot::plot{'lmargin'}.$/; + } + if (lc($Apache::lonplot::plot{'rmargin'}) ne 'default') { + $gnuplot_input .= 'set rmargin '.$Apache::lonplot::plot{'rmargin'}.$/; + } + if (lc($Apache::lonplot::plot{'tmargin'}) ne 'default') { + $gnuplot_input .= 'set tmargin '.$Apache::lonplot::plot{'tmargin'}.$/; + } + if (lc($Apache::lonplot::plot{'bmargin'}) ne 'default') { + $gnuplot_input .= 'set bmargin '.$Apache::lonplot::plot{'bmargin'}.$/; + } + + # tic scales + if ($version > 4) { + $gnuplot_input .= 'set tics scale '. + $Apache::lonplot::plot{'major_ticscale'}.', '.$Apache::lonplot::plot{'minor_ticscale'}.$/; + } else { + $gnuplot_input .= 'set ticscale '. + $Apache::lonplot::plot{'major_ticscale'}.' '.$Apache::lonplot::plot{'minor_ticscale'}.$/; } + #boxwidth + if (lc($Apache::lonplot::plot{'boxwidth'}) ne '') { + $gnuplot_input .= 'set boxwidth '.$Apache::lonplot::plot{'boxwidth'}.$/; + } + # gridlayer + $gnuplot_input .= 'set grid noxtics noytics front '.$/ + if ($Apache::lonplot::plot{'gridlayer'} eq 'on'); + # grid - $gnuplot_input .= 'set grid'.$/ if ($plot{'grid'} eq 'on'); + $gnuplot_input .= 'set grid'.$/ if ($Apache::lonplot::plot{'grid'} eq 'on'); # border - $gnuplot_input .= ($plot{'border'} eq 'on'? + $gnuplot_input .= ($Apache::lonplot::plot{'border'} eq 'on'? 'set border'.$/ : 'set noborder'.$/ ); # sampling rate for non-data curves - $gnuplot_input .= "set samples $plot{'samples'}\n"; + $gnuplot_input .= "set samples $Apache::lonplot::plot{'samples'}\n"; # title, xlabel, ylabel # titles - $gnuplot_input .= "set title \"$title\"\n" if (defined($title)) ; - $gnuplot_input .= "set xlabel \"$xlabel\"\n" if (defined($xlabel)); - $gnuplot_input .= "set ylabel \"$ylabel\"\n" if (defined($ylabel)); + my $extra_space_x = ($xtics{'location'} eq 'axis') ? ' 0, -0.5 ' : ''; + my $extra_space_y = ($ytics{'location'} eq 'axis') ? ' -0.5, 0 ' : ''; + + if ($target eq 'tex') { + $gnuplot_input .= "set title \"$title\" font \"".$font_properties->{'printname'}.",".$fontsize."pt\"\n" if (defined($title)) ; + $gnuplot_input .= "set xlabel \"$xlabel\" $extra_space_x font \"".$font_properties->{'printname'}.",".$fontsize."pt\"\n" if (defined($xlabel)); + $gnuplot_input .= "set ylabel \"$ylabel\" $extra_space_y font \"".$font_properties->{'printname'}.",".$fontsize."pt\"\n" if (defined($ylabel)); + } else { + $gnuplot_input .= "set title \"$title\" \n" if (defined($title)) ; + $gnuplot_input .= "set xlabel \"$xlabel\" $extra_space_x \n" if (defined($xlabel)); + $gnuplot_input .= "set ylabel \"$ylabel\" $extra_space_y \n" if (defined($ylabel)); + } # tics if (%xtics) { $gnuplot_input .= "set xtics $xtics{'location'} "; @@ -1021,6 +1389,9 @@ sub write_gnuplot_file { $gnuplot_input .= "$xtics{'start'}, "; $gnuplot_input .= "$xtics{'increment'}, "; $gnuplot_input .= "$xtics{'end'}\n"; + if ($xtics{'minorfreq'} != 0) { + $gnuplot_input .= "set mxtics ".$xtics{'minorfreq'}."\n"; + } } if (%ytics) { $gnuplot_input .= "set ytics $ytics{'location'} "; @@ -1028,9 +1399,28 @@ sub write_gnuplot_file { $gnuplot_input .= "$ytics{'start'}, "; $gnuplot_input .= "$ytics{'increment'}, "; $gnuplot_input .= "$ytics{'end'}\n"; + if ($ytics{'minorfreq'} != 0) { + $gnuplot_input .= "set mytics ".$ytics{'minorfreq'}."\n"; + } } # axis if (%axis) { + if ($axis{'xformat'} ne 'on') { + $gnuplot_input .= "set format x "; + if ($axis{'xformat'} eq 'off') { + $gnuplot_input .= "\"\"\n"; + } else { + $gnuplot_input .= "\"\%.".$axis{'xformat'}."\"\n"; + } + } + if ($axis{'yformat'} ne 'on') { + $gnuplot_input .= "set format y "; + if ($axis{'yformat'} eq 'off') { + $gnuplot_input .= "\"\"\n"; + } else { + $gnuplot_input .= "\"\%.".$axis{'yformat'}."\"\n"; + } + } $gnuplot_input .= "set xrange \[$axis{'xmin'}:$axis{'xmax'}\]\n"; $gnuplot_input .= "set yrange \[$axis{'ymin'}:$axis{'ymax'}\]\n"; } @@ -1048,23 +1438,35 @@ sub write_gnuplot_file { my $label; foreach $label (@labels) { $gnuplot_input .= 'set label "'.$label->{'text'}.'" at '. - $label->{'xpos'}.','.$label->{'ypos'}.' '.$label->{'justify'}.$/ ; + $label->{'xpos'}.','.$label->{'ypos'}; + if ($label->{'rotate'} ne '') { + $gnuplot_input .= ' rotate by '.$label->{'rotate'}; + } + $gnuplot_input .= ' '.$label->{'justify'}; + + if ($target eq 'tex') { + $gnuplot_input .=' font "'.$font_properties->{'printname'}.','.$fontsize.'pt"' ; + } + $gnuplot_input .= $/; } if ($target eq 'tex') { - $gnuplot_input .="set size 1,".$plot{'height'}/$plot{'width'}*1.38; + $gnuplot_input .="set size 1,".$Apache::lonplot::plot{'height'}/$Apache::lonplot::plot{'width'}*1.38; $gnuplot_input .="\n"; - } + } # curves $gnuplot_input .= 'plot '; for (my $i = 0;$i<=$#curves;$i++) { $curve = $curves[$i]; $gnuplot_input.= ', ' if ($i > 0); + if ($target eq 'tex') { + $curve->{'linewidth'} *= 2; + } if (exists($curve->{'function'})) { $gnuplot_input.= $curve->{'function'}.' title "'. $curve->{'name'}.'" with '. $curve->{'linestyle'}; - $gnuplot_input.= ' linewidth 4 ' if ($target eq 'tex'); + if (($curve->{'linestyle'} eq 'points') || ($curve->{'linestyle'} eq 'linespoints') || ($curve->{'linestyle'} eq 'errorbars') || @@ -1073,7 +1475,19 @@ sub write_gnuplot_file { ($curve->{'linestyle'} eq 'xyerrorbars')) { $gnuplot_input.=' pointtype '.$curve->{'pointtype'}; $gnuplot_input.=' pointsize '.$curve->{'pointsize'}; + } elsif ($curve->{'linestyle'} eq 'filledcurves') { + $gnuplot_input.= ' '.$curve->{'limit'}; + } elsif ($curve->{'linetype'} ne '' && + $curve->{'linestyle'} eq 'lines') { + $gnuplot_input.= ' linetype '; + $gnuplot_input.= $linetypes{$curve->{'linetype'}}; + $gnuplot_input.= ' linecolor rgb "'; + # convert color from xaaaaaa to #aaaaaa + $curve->{'color'} =~ s/x/#/; + $gnuplot_input.= $curve->{'color'}.'"'; } + $gnuplot_input.= ' linewidth '.$curve->{'linewidth'}; + } elsif (exists($curve->{'data'})) { # Store data values in $datatext my $datatext = ''; @@ -1092,12 +1506,11 @@ sub write_gnuplot_file { } # write file print $fh $datatext; - close ($fh); + close($fh); # generate gnuplot text $gnuplot_input.= '"'.$datafilename.'" title "'. $curve->{'name'}.'" with '. $curve->{'linestyle'}; - $gnuplot_input.= ' linewidth 4 ' if ($target eq 'tex'); if (($curve->{'linestyle'} eq 'points') || ($curve->{'linestyle'} eq 'linespoints') || ($curve->{'linestyle'} eq 'errorbars') || @@ -1106,11 +1519,23 @@ sub write_gnuplot_file { ($curve->{'linestyle'} eq 'xyerrorbars')) { $gnuplot_input.=' pointtype '.$curve->{'pointtype'}; $gnuplot_input.=' pointsize '.$curve->{'pointsize'}; + } elsif ($curve->{'linestyle'} eq 'filledcurves') { + $gnuplot_input.= ' '.$curve->{'limit'}; + } elsif ($curve->{'linetype'} ne '' && + $curve->{'linestyle'} eq 'lines') { + $gnuplot_input.= ' linetype '; + $gnuplot_input.= $linetypes{$curve->{'linetype'}}; + $gnuplot_input.= ' linecolor rgb "'; + # convert color from xaaaaaa to #aaaaaa + $curve->{'color'} =~ s/x/#/; + $gnuplot_input.= $curve->{'color'}.'"'; } + $gnuplot_input.= ' linewidth '.$curve->{'linewidth'}; } } # Write the output to a file. - my $fh=Apache::File->new(">$tmpdir$filename.data"); + open (my $fh,">$tmpdir$filename.data"); + binmode($fh, ":utf8"); print $fh $gnuplot_input; close($fh); # That's all folks. @@ -1121,7 +1546,7 @@ sub write_gnuplot_file { sub check_inputs { ## Note: no inputs, no outputs - this acts only on global variables. ## Make sure we have all the input we need: - if (! %plot) { &set_defaults(\%plot,\%gnuplot_defaults); } + if (! %Apache::lonplot::plot) { &set_defaults(\%Apache::lonplot::plot,\%gnuplot_defaults); } if (! %key ) {} # No key for this plot, thats okay # if (! %axis) { &set_defaults(\%axis,\%axis_defaults); } if (! defined($title )) {} # No title for this plot, thats okay @@ -1135,7 +1560,7 @@ sub check_inputs { my $curve; foreach $curve (@curves) { if (!defined($curve->{'function'})&&!defined($curve->{'data'})){ - &Apache::lonxml::warning("One of the curves specified did not contain any or declarations\n"); + &Apache::lonxml::warning("One of the curves specified did not contain any curve data or curve function declarations\n"); return ''; } } @@ -1159,10 +1584,10 @@ sub edit_attributes { ($description,$attr,$token, $defaults->{$attr}->{'size'}); } elsif ($defaults->{$attr}->{'edit_type'} eq 'choice') { - $result .= &Apache::edit::select_arg + $result .= &Apache::edit::select_or_text_arg ($description,$attr,$defaults->{$attr}->{'choices'},$token); } elsif ($defaults->{$attr}->{'edit_type'} eq 'onoff') { - $result .= &Apache::edit::select_arg + $result .= &Apache::edit::select_or_text_arg ($description,$attr,['on','off'],$token); } $result .= '
'; @@ -1282,40 +1707,6 @@ sub insert_data { } ##---------------------------------------------------------------------- -# Javascript functions to display help for tags - -sub make_javascript { - my $helpwindowwidth = 400; - my $helpwindowheight = 400; - my $result = ''; - $result.=<<"ENDFUNCTION"; - -ENDFUNCTION - return $result; -} - -sub help_win { - my ($helptext)=@_; - $helptext =~ s/\n/ /g; - $helptext =~ s/\'/\\\'/g; - my $result = ''; - $result.=<<"ENDWIN"; -
-help -

-ENDWIN - return $result; -} -##---------------------------------------------------------------------- 1; __END__