Diff for /loncom/lond between versions 1.163 and 1.228

version 1.163, 2003/11/17 09:32:17 version 1.228, 2004/08/10 22:55:31
Line 10 Line 10
 #  #
 # LON-CAPA is free software; you can redistribute it and/or modify  # LON-CAPA is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by  # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2 of the License, or  # the Free Software Foundation; either version 2 of the License, or 
 # (at your option) any later version.  # (at your option) any later version.
 #  #
 # LON-CAPA is distributed in the hope that it will be useful,  # LON-CAPA is distributed in the hope that it will be useful,
Line 45  use Authen::Krb4; Line 45  use Authen::Krb4;
 use Authen::Krb5;  use Authen::Krb5;
 use lib '/home/httpd/lib/perl/';  use lib '/home/httpd/lib/perl/';
 use localauth;  use localauth;
   use localenroll;
 use File::Copy;  use File::Copy;
   use LONCAPA::ConfigFileEdit;
   use LONCAPA::lonlocal;
   use LONCAPA::lonssl;
   use Fcntl qw(:flock);
   
 my $DEBUG = 0;       # Non zero to enable debug log entries.  my $DEBUG = 0;       # Non zero to enable debug log entries.
   
Line 54  my $lastlog=''; Line 59  my $lastlog='';
   
 my $VERSION='$Revision$'; #' stupid emacs  my $VERSION='$Revision$'; #' stupid emacs
 my $remoteVERSION;  my $remoteVERSION;
 my $currenthostid;  my $currenthostid="default";
 my $currentdomainid;  my $currentdomainid;
   
 my $client;  my $client;
 my $clientip;  my $clientip; # IP address of client.
 my $clientname;  my $clientdns; # DNS name of client.
   my $clientname; # LonCAPA name of client.
   
 my $server;  my $server;
 my $thisserver;  my $thisserver; # DNS of us.
   
   my $keymode;
   
   my $cipher; # Cipher key negotiated with client
   my $tmpsnum = 0; # Id of tmpputs.
   
 #   # 
 #   Connection type is:  #   Connection type is:
Line 73  my $thisserver; Line 84  my $thisserver;
   
 my $ConnectionType;  my $ConnectionType;
   
 my %hostid;  my %hostid; # ID's for hosts in cluster by ip.
 my %hostdom;  my %hostdom; # LonCAPA domain for hosts in cluster.
 my %hostip;  my %hostip; # IPs for hosts in cluster.
   my %hostdns; # ID's of hosts looked up by DNS name.
   
 my %managers; # Ip -> manager names  my %managers; # Ip -> manager names
   
 my %perlvar; # Will have the apache conf defined perl vars.  my %perlvar; # Will have the apache conf defined perl vars.
   
 #  #
   #   The hash below is used for command dispatching, and is therefore keyed on the request keyword.
   #    Each element of the hash contains a reference to an array that contains:
   #          A reference to a sub that executes the request corresponding to the keyword.
   #          A flag that is true if the request must be encoded to be acceptable.
   #          A mask with bits as follows:
   #                      CLIENT_OK    - Set when the function is allowed by ordinary clients
   #                      MANAGER_OK   - Set when the function is allowed to manager clients.
   #
   my $CLIENT_OK  = 1;
   my $MANAGER_OK = 2;
   my %Dispatcher;
   
   
   #
 #  The array below are password error strings."  #  The array below are password error strings."
 #  #
 my $lastpwderror    = 13; # Largest error number from lcpasswd.  my $lastpwderror    = 13; # Largest error number from lcpasswd.
Line 96  my @passwderrors = ("ok", Line 122  my @passwderrors = ("ok",
    "lcpasswd Cannot set new passwd.",     "lcpasswd Cannot set new passwd.",
    "lcpasswd Username has invalid characters",     "lcpasswd Username has invalid characters",
    "lcpasswd Invalid characters in password",     "lcpasswd Invalid characters in password",
     "11", "12",     "lcpasswd User already exists", 
     "lcpasswd Password mismatch");                     "lcpasswd Something went wrong with user addition.",
       "lcpasswd Password mismatch",
       "lcpasswd Error filename is invalid");
   
   
 #  The array below are lcuseradd error strings.:  #  The array below are lcuseradd error strings.:
Line 119  my @adderrors    = ("ok", Line 147  my @adderrors    = ("ok",
     "lcuseradd Password mismatch");      "lcuseradd Password mismatch");
   
   
   
   #
   #   Statistics that are maintained and dislayed in the status line.
   #
   my $Transactions = 0; # Number of attempted transactions.
   my $Failures     = 0; # Number of transcations failed.
   
   #   ResetStatistics: 
   #      Resets the statistics counters:
   #
   sub ResetStatistics {
       $Transactions = 0;
       $Failures     = 0;
   }
   
   #------------------------------------------------------------------------
   #
   #   LocalConnection
   #     Completes the formation of a locally authenticated connection.
   #     This function will ensure that the 'remote' client is really the
   #     local host.  If not, the connection is closed, and the function fails.
   #     If so, initcmd is parsed for the name of a file containing the
   #     IDEA session key.  The fie is opened, read, deleted and the session
   #     key returned to the caller.
   #
   # Parameters:
   #   $Socket      - Socket open on client.
   #   $initcmd     - The full text of the init command.
   #
   # Implicit inputs:
   #    $clientdns  - The DNS name of the remote client.
   #    $thisserver - Our DNS name.
   #
   # Returns:
   #     IDEA session key on success.
   #     undef on failure.
   #
   sub LocalConnection {
       my ($Socket, $initcmd) = @_;
       Debug("Attempting local connection: $initcmd client: $clientdns me: $thisserver");
       if($clientdns ne $thisserver) {
    &logthis('<font color="red"> LocalConnection rejecting non local: '
    ."$clientdns ne $thisserver </font>");
    close $Socket;
    return undef;
       }  else {
    chomp($initcmd); # Get rid of \n in filename.
    my ($init, $type, $name) = split(/:/, $initcmd);
    Debug(" Init command: $init $type $name ");
   
    # Require that $init = init, and $type = local:  Otherwise
    # the caller is insane:
   
    if(($init ne "init") && ($type ne "local")) {
       &logthis('<font color = "red"> LocalConnection: caller is insane! '
        ."init = $init, and type = $type </font>");
       close($Socket);;
       return undef;
   
    }
    #  Now get the key filename:
   
    my $IDEAKey = lonlocal::ReadKeyFile($name);
    return $IDEAKey;
       }
   }
   #------------------------------------------------------------------------------
   #
   #  SSLConnection
   #   Completes the formation of an ssh authenticated connection. The
   #   socket is promoted to an ssl socket.  If this promotion and the associated
   #   certificate exchange are successful, the IDEA key is generated and sent
   #   to the remote peer via the SSL tunnel. The IDEA key is also returned to
   #   the caller after the SSL tunnel is torn down.
   #
   # Parameters:
   #   Name              Type             Purpose
   #   $Socket          IO::Socket::INET  Plaintext socket.
   #
   # Returns:
   #    IDEA key on success.
   #    undef on failure.
   #
   sub SSLConnection {
       my $Socket   = shift;
   
       Debug("SSLConnection: ");
       my $KeyFile         = lonssl::KeyFile();
       if(!$KeyFile) {
    my $err = lonssl::LastError();
    &logthis("<font color=\"red\"> CRITICAL"
    ."Can't get key file $err </font>");
    return undef;
       }
       my ($CACertificate,
    $Certificate) = lonssl::CertificateFile();
   
   
       # If any of the key, certificate or certificate authority 
       # certificate filenames are not defined, this can't work.
   
       if((!$Certificate) || (!$CACertificate)) {
    my $err = lonssl::LastError();
    &logthis("<font color=\"red\"> CRITICAL"
    ."Can't get certificates: $err </font>");
   
    return undef;
       }
       Debug("Key: $KeyFile CA: $CACertificate Cert: $Certificate");
   
       # Indicate to our peer that we can procede with
       # a transition to ssl authentication:
   
       print $Socket "ok:ssl\n";
   
       Debug("Approving promotion -> ssl");
       #  And do so:
   
       my $SSLSocket = lonssl::PromoteServerSocket($Socket,
    $CACertificate,
    $Certificate,
    $KeyFile);
       if(! ($SSLSocket) ) { # SSL socket promotion failed.
    my $err = lonssl::LastError();
    &logthis("<font color=\"red\"> CRITICAL "
    ."SSL Socket promotion failed: $err </font>");
    return undef;
       }
       Debug("SSL Promotion successful");
   
       # 
       #  The only thing we'll use the socket for is to send the IDEA key
       #  to the peer:
   
       my $Key = lonlocal::CreateCipherKey();
       print $SSLSocket "$Key\n";
   
       lonssl::Close($SSLSocket); 
   
       Debug("Key exchange complete: $Key");
   
       return $Key;
   }
   #
   #     InsecureConnection: 
   #        If insecure connections are allowd,
   #        exchange a challenge with the client to 'validate' the
   #        client (not really, but that's the protocol):
   #        We produce a challenge string that's sent to the client.
   #        The client must then echo the challenge verbatim to us.
   #
   #  Parameter:
   #      Socket      - Socket open on the client.
   #  Returns:
   #      1           - success.
   #      0           - failure (e.g.mismatch or insecure not allowed).
   #
   sub InsecureConnection {
       my $Socket  =  shift;
   
       #   Don't even start if insecure connections are not allowed.
   
       if(! $perlvar{londAllowInsecure}) { # Insecure connections not allowed.
    return 0;
       }
   
       #   Fabricate a challenge string and send it..
   
       my $challenge = "$$".time; # pid + time.
       print $Socket "$challenge\n";
       &status("Waiting for challenge reply");
   
       my $answer = <$Socket>;
       $answer    =~s/\W//g;
       if($challenge eq $answer) {
    return 1;
       } else {
    logthis("<font color='blue'>WARNING client did not respond to challenge</font>");
    &status("No challenge reqply");
    return 0;
       }
       
   
   }
   
 #  #
 #   GetCertificate: Given a transaction that requires a certificate,  #   GetCertificate: Given a transaction that requires a certificate,
 #   this function will extract the certificate from the transaction  #   this function will extract the certificate from the transaction
Line 157  sub isClient { Line 370  sub isClient {
 #                     - This allows dynamic changes to the manager table  #                     - This allows dynamic changes to the manager table
 #                       without the need to signal to the lond.  #                       without the need to signal to the lond.
 #  #
   
 sub ReadManagerTable {  sub ReadManagerTable {
   
     #   Clean out the old table first..      #   Clean out the old table first..
   
     foreach my $key (keys %managers) {     foreach my $key (keys %managers) {
  delete $managers{$key};        delete $managers{$key};
     }     }
   
     my $tablename = $perlvar{'lonTabDir'}."/managers.tab";     my $tablename = $perlvar{'lonTabDir'}."/managers.tab";
     if (!open (MANAGERS, $tablename)) {     if (!open (MANAGERS, $tablename)) {
  logthis('<font color="red">No manager table.  Nobody can manage!!</font>');        logthis('<font color="red">No manager table.  Nobody can manage!!</font>');
  return;        return;
     }     }
     while(my $host = <MANAGERS>) {     while(my $host = <MANAGERS>) {
  chomp($host);        chomp($host);
  if (!defined $hostip{$host}) { # This is a non cluster member        if ($host =~ "^#") {                  # Comment line.
            next;
         }
         if (!defined $hostip{$host}) { # This is a non cluster member
     #  The entry is of the form:      #  The entry is of the form:
     #    cluname:hostname      #    cluname:hostname
     #  cluname - A 'cluster hostname' is needed in order to negotiate      #  cluname - A 'cluster hostname' is needed in order to negotiate
     #            the host key.      #            the host key.
     #  hostname- The dns name of the host.      #  hostname- The dns name of the host.
     #      #
                 my($cluname, $dnsname) = split(/:/, $host);
     my($cluname, $dnsname) = split(/:/, $host);            
     open(MGRPIPE, "/usr/bin/host $dnsname |") || die "Can't make host pipeline";            my $ip = gethostbyname($dnsname);
     my $dnsinfo = <MGRPIPE>;            if(defined($ip)) {                 # bad names don't deserve entry.
     chomp $dnsinfo;              my $hostip = inet_ntoa($ip);
     close MGRPIPE;              $managers{$hostip} = $cluname;
     my($jname, $jhas, $jaddress, $hostip) = split(/ /, $dnsinfo);              logthis('<font color="green"> registering manager '.
     $managers{$hostip} = $cluname;                      "$dnsname as $cluname with $hostip </font>\n");
  } else {           }
     $managers{$hostip{$host}} = $host;  # Use info from cluster tab if clumemeber        } else {
  }           logthis('<font color="green"> existing host'." $host</font>\n");
     }           $managers{$hostip{$host}} = $host;  # Use info from cluster tab if clumemeber
         }
      }
 }  }
   
 #  #
Line 219  sub ValidManager { Line 435  sub ValidManager {
 #     1   - Success.  #     1   - Success.
 #  #
 sub CopyFile {  sub CopyFile {
     my $oldfile = shift;  
     my $newfile = shift;      my ($oldfile, $newfile) = @_;
   
     #  The file must exist:      #  The file must exist:
   
Line 279  sub AdjustHostContents { Line 495  sub AdjustHostContents {
     my $adjusted;      my $adjusted;
     my $me        = $perlvar{'lonHostID'};      my $me        = $perlvar{'lonHostID'};
   
     foreach my $line (split(/\n/,$contents)) {   foreach my $line (split(/\n/,$contents)) {
  if(!(($line eq "") || ($line =~ /^ *\#/) || ($line =~ /^ *$/))) {   if(!(($line eq "") || ($line =~ /^ *\#/) || ($line =~ /^ *$/))) {
     chomp($line);      chomp($line);
     my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon)=split(/:/,$line);      my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon)=split(/:/,$line);
     if ($id eq $me) {      if ($id eq $me) {
  open(PIPE, " /usr/bin/host $name |") || die "Cant' make host pipeline";            my $ip = gethostbyname($name);
  my $hostinfo = <PIPE>;            my $ipnew = inet_ntoa($ip);
  close PIPE;           $ip = $ipnew;
   
  my ($hostname, $has, $address, $ipnew) = split(/ /,$hostinfo);  
  &logthis('<font color="green">'.  
  "hostname = $hostname me = $me, name = $name   actual ip = $ipnew </font>");  
   
  if ($hostname eq $name) { # Lookup succeeded..  
     &logthis('<font color="green"> look up ok <font>');  
     $ip = $ipnew;  
  } else {  
     &logthis('<font color="green"> Lookup failed: '  
      .$hostname." ne $name </font>");  
  }  
  #  Reconstruct the host line and append to adjusted:   #  Reconstruct the host line and append to adjusted:
   
  my $newline = "$id:$domain:$role:$name:$ip";     my $newline = "$id:$domain:$role:$name:$ip";
  if($maxcon ne "") { # Not all hosts have loncnew tuning params     if($maxcon ne "") { # Not all hosts have loncnew tuning params
     $newline .= ":$maxcon:$idleto:$mincon";       $newline .= ":$maxcon:$idleto:$mincon";
  }     }
  $adjusted .= $newline."\n";     $adjusted .= $newline."\n";
   
     } else { # Not me, pass unmodified.        } else { # Not me, pass unmodified.
  $adjusted .= $line."\n";     $adjusted .= $line."\n";
     }        }
  } else {                  # Blank or comment never re-written.   } else {                  # Blank or comment never re-written.
     $adjusted .= $line."\n"; # Pass blanks and comments as is.      $adjusted .= $line."\n"; # Pass blanks and comments as is.
  }   }
     }   }
     return $adjusted;   return $adjusted;
 }  }
 #  #
 #   InstallFile: Called to install an administrative file:  #   InstallFile: Called to install an administrative file:
Line 332  sub AdjustHostContents { Line 536  sub AdjustHostContents {
 #      0       - failure and $! has an errno.  #      0       - failure and $! has an errno.
 #  #
 sub InstallFile {  sub InstallFile {
     my $Filename = shift;  
     my $Contents = shift;      my ($Filename, $Contents) = @_;
     my $TempFile = $Filename.".tmp";      my $TempFile = $Filename.".tmp";
   
     #  Open the file for write:      #  Open the file for write:
Line 357  sub InstallFile { Line 561  sub InstallFile {
     return 1;      return 1;
 }  }
   
   
   #
   #   ConfigFileFromSelector: converts a configuration file selector
   #                 (one of host or domain at this point) into a 
   #                 configuration file pathname.
   #
   #  Parameters:
   #      selector  - Configuration file selector.
   #  Returns:
   #      Full path to the file or undef if the selector is invalid.
   #
   sub ConfigFileFromSelector {
       my $selector   = shift;
       my $tablefile;
   
       my $tabledir = $perlvar{'lonTabDir'}.'/';
       if ($selector eq "hosts") {
    $tablefile = $tabledir."hosts.tab";
       } elsif ($selector eq "domain") {
    $tablefile = $tabledir."domain.tab";
       } else {
    return undef;
       }
       return $tablefile;
   
   }
 #  #
 #   PushFile:  Called to do an administrative push of a file.  #   PushFile:  Called to do an administrative push of a file.
 #              - Ensure the file being pushed is one we support.  #              - Ensure the file being pushed is one we support.
Line 386  sub PushFile { Line 616  sub PushFile {
     # part of some elaborate spoof that managed somehow to authenticate.      # part of some elaborate spoof that managed somehow to authenticate.
     #      #
   
     my $tablefile = $perlvar{'lonTabDir'}.'/'; # need to precede with dir.  
     if ($filename eq "host") {      my $tablefile = ConfigFileFromSelector($filename);
  $tablefile .= "hosts.tab";      if(! (defined $tablefile)) {
     } elsif ($filename eq "domain") {  
  $tablefile .= "domain.tab";  
     } else {  
  return "refused";   return "refused";
     }      }
     #      #
Line 424  sub PushFile { Line 651  sub PushFile {
  &logthis('<font color="red"> Pushfile: unable to install '   &logthis('<font color="red"> Pushfile: unable to install '
  .$tablefile." $! </font>");   .$tablefile." $! </font>");
  return "error:$!";   return "error:$!";
     }      } else {
     else {  
  &logthis('<font color="green"> Installed new '.$tablefile   &logthis('<font color="green"> Installed new '.$tablefile
  ."</font>");   ."</font>");
   
Line 483  sub ReinitProcess { Line 709  sub ReinitProcess {
     }      }
     return 'ok';      return 'ok';
 }  }
   #   Validate a line in a configuration file edit script:
   #   Validation includes:
   #     - Ensuring the command is valid.
   #     - Ensuring the command has sufficient parameters
   #   Parameters:
   #     scriptline - A line to validate (\n has been stripped for what it's worth).
   #
   #   Return:
   #      0     - Invalid scriptline.
   #      1     - Valid scriptline
   #  NOTE:
   #     Only the command syntax is checked, not the executability of the
   #     command.
   #
   sub isValidEditCommand {
       my $scriptline = shift;
   
       #   Line elements are pipe separated:
   
       my ($command, $key, $newline)  = split(/\|/, $scriptline);
       &logthis('<font color="green"> isValideditCommand checking: '.
        "Command = '$command', Key = '$key', Newline = '$newline' </font>\n");
       
       if ($command eq "delete") {
    #
    #   key with no newline.
    #
    if( ($key eq "") || ($newline ne "")) {
       return 0; # Must have key but no newline.
    } else {
       return 1; # Valid syntax.
    }
       } elsif ($command eq "replace") {
    #
    #   key and newline:
    #
    if (($key eq "") || ($newline eq "")) {
       return 0;
    } else {
       return 1;
    }
       } elsif ($command eq "append") {
    if (($key ne "") && ($newline eq "")) {
       return 1;
    } else {
       return 0;
    }
       } else {
    return 0; # Invalid command.
       }
       return 0; # Should not get here!!!
   }
   #
   #   ApplyEdit - Applies an edit command to a line in a configuration 
   #               file.  It is the caller's responsiblity to validate the
   #               edit line.
   #   Parameters:
   #      $directive - A single edit directive to apply.  
   #                   Edit directives are of the form:
   #                  append|newline      - Appends a new line to the file.
   #                  replace|key|newline - Replaces the line with key value 'key'
   #                  delete|key          - Deletes the line with key value 'key'.
   #      $editor   - A config file editor object that contains the
   #                  file being edited.
   #
   sub ApplyEdit {
   
       my ($directive, $editor) = @_;
   
       # Break the directive down into its command and its parameters
       # (at most two at this point.  The meaning of the parameters, if in fact
       #  they exist depends on the command).
   
       my ($command, $p1, $p2) = split(/\|/, $directive);
   
       if($command eq "append") {
    $editor->Append($p1);          # p1 - key p2 null.
       } elsif ($command eq "replace") {
    $editor->ReplaceLine($p1, $p2);   # p1 - key p2 = newline.
       } elsif ($command eq "delete") {
    $editor->DeleteLine($p1);         # p1 - key p2 null.
       } else {          # Should not get here!!!
    die "Invalid command given to ApplyEdit $command"
       }
   }
   #
   # AdjustOurHost:
   #           Adjusts a host file stored in a configuration file editor object
   #           for the true IP address of this host. This is necessary for hosts
   #           that live behind a firewall.
   #           Those hosts have a publicly distributed IP of the firewall, but
   #           internally must use their actual IP.  We assume that a given
   #           host only has a single IP interface for now.
   # Formal Parameters:
   #     editor   - The configuration file editor to adjust.  This
   #                editor is assumed to contain a hosts.tab file.
   # Strategy:
   #    - Figure out our hostname.
   #    - Lookup the entry for this host.
   #    - Modify the line to contain our IP
   #    - Do a replace for this host.
   sub AdjustOurHost {
       my $editor        = shift;
   
       # figure out who I am.
   
       my $myHostName    = $perlvar{'lonHostID'}; # LonCAPA hostname.
   
       #  Get my host file entry.
   
       my $ConfigLine    = $editor->Find($myHostName);
       if(! (defined $ConfigLine)) {
    die "AdjustOurHost - no entry for me in hosts file $myHostName";
       }
       # figure out my IP:
       #   Use the config line to get my hostname.
       #   Use gethostbyname to translate that into an IP address.
       #
       my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon) = split(/:/,$ConfigLine);
       my $BinaryIp = gethostbyname($name);
       my $ip       = inet_ntoa($ip);
       #
       #  Reassemble the config line from the elements in the list.
       #  Note that if the loncnew items were not present before, they will
       #  be now even if they would be empty
       #
       my $newConfigLine = $id;
       foreach my $item ($domain, $role, $name, $ip, $maxcon, $idleto, $mincon) {
    $newConfigLine .= ":".$item;
       }
       #  Replace the line:
   
       $editor->ReplaceLine($id, $newConfigLine);
       
   }
   #
   #   ReplaceConfigFile:
   #              Replaces a configuration file with the contents of a
   #              configuration file editor object.
   #              This is done by:
   #              - Copying the target file to <filename>.old
   #              - Writing the new file to <filename>.tmp
   #              - Moving <filename.tmp>  -> <filename>
   #              This laborious process ensures that the system is never without
   #              a configuration file that's at least valid (even if the contents
   #              may be dated).
   #   Parameters:
   #        filename   - Name of the file to modify... this is a full path.
   #        editor     - Editor containing the file.
   #
   sub ReplaceConfigFile {
       
       my ($filename, $editor) = @_;
   
       CopyFile ($filename, $filename.".old");
   
       my $contents  = $editor->Get(); # Get the contents of the file.
   
       InstallFile($filename, $contents);
   }
   #   
   #
   #   Called to edit a configuration table  file
   #   Parameters:
   #      request           - The entire command/request sent by lonc or lonManage
   #   Return:
   #      The reply to send to the client.
   #
   sub EditFile {
       my $request = shift;
   
       #  Split the command into it's pieces:  edit:filetype:script
   
       my ($request, $filetype, $script) = split(/:/, $request,3); # : in script
   
       #  Check the pre-coditions for success:
   
       if($request != "edit") { # Something is amiss afoot alack.
    return "error:edit request detected, but request != 'edit'\n";
       }
       if( ($filetype ne "hosts")  &&
    ($filetype ne "domain")) {
    return "error:edit requested with invalid file specifier: $filetype \n";
       }
   
       #   Split the edit script and check it's validity.
   
       my @scriptlines = split(/\n/, $script);  # one line per element.
       my $linecount   = scalar(@scriptlines);
       for(my $i = 0; $i < $linecount; $i++) {
    chomp($scriptlines[$i]);
    if(!isValidEditCommand($scriptlines[$i])) {
       return "error:edit with bad script line: '$scriptlines[$i]' \n";
    }
       }
   
       #   Execute the edit operation.
       #   - Create a config file editor for the appropriate file and 
       #   - execute each command in the script:
       #
       my $configfile = ConfigFileFromSelector($filetype);
       if (!(defined $configfile)) {
    return "refused\n";
       }
       my $editor = ConfigFileEdit->new($configfile);
   
       for (my $i = 0; $i < $linecount; $i++) {
    ApplyEdit($scriptlines[$i], $editor);
       }
       # If the file is the host file, ensure that our host is
       # adjusted to have our ip:
       #
       if($filetype eq "host") {
    AdjustOurHost($editor);
       }
       #  Finally replace the current file with our file.
       #
       ReplaceConfigFile($configfile, $editor);
   
       return "ok\n";
   }
   
   #---------------------------------------------------------------
   #
   # Manipulation of hash based databases (factoring out common code
   # for later use as we refactor.
   #
   #  Ties a domain level resource file to a hash.
   #  If requested a history entry is created in the associated hist file.
   #
   #  Parameters:
   #     domain    - Name of the domain in which the resource file lives.
   #     namespace - Name of the hash within that domain.
   #     how       - How to tie the hash (e.g. GDBM_WRCREAT()).
   #     loghead   - Optional parameter, if present a log entry is created
   #                 in the associated history file and this is the first part
   #                  of that entry.
   #     logtail   - Goes along with loghead,  The actual logentry is of the
   #                 form $loghead:<timestamp>:logtail.
   # Returns:
   #    Reference to a hash bound to the db file or alternatively undef
   #    if the tie failed.
   #
   sub tie_domain_hash {
       my ($domain,$namespace,$how,$loghead,$logtail) = @_;
       
       # Filter out any whitespace in the domain name:
       
       $domain =~ s/\W//g;
       
       # We have enough to go on to tie the hash:
       
       my $user_top_dir   = $perlvar{'lonUsersDir'};
       my $domain_dir     = $user_top_dir."/$domain";
       my $resource_file  = $domain_dir."/$namespace.db";
       my %hash;
       if(tie(%hash, 'GDBM_File', $resource_file, $how, 0640)) {
    if (defined($loghead)) { # Need to log the operation.
       my $logFh = IO::File->new(">>$domain_dir/$namespace.hist");
       if($logFh) {
    my $timestamp = time;
    print $logFh "$loghead:$timestamp:$logtail\n";
       }
       $logFh->close;
    }
    return \%hash; # Return the tied hash.
       } else {
    return undef; # Tie failed.
       }
   }
   
   #
   #   Ties a user's resource file to a hash.  
   #   If necessary, an appropriate history
   #   log file entry is made as well.
   #   This sub factors out common code from the subs that manipulate
   #   the various gdbm files that keep keyword value pairs.
   # Parameters:
   #   domain       - Name of the domain the user is in.
   #   user         - Name of the 'current user'.
   #   namespace    - Namespace representing the file to tie.
   #   how          - What the tie is done to (e.g. GDBM_WRCREAT().
   #   loghead      - Optional first part of log entry if there may be a
   #                  history file.
   #   what         - Optional tail of log entry if there may be a history
   #                  file.
   # Returns:
   #   hash to which the database is tied.  It's up to the caller to untie.
   #   undef if the has could not be tied.
   #
   sub tie_user_hash {
       my ($domain,$user,$namespace,$how,$loghead,$what) = @_;
   
       $namespace=~s/\//\_/g; # / -> _
       $namespace=~s/\W//g; # whitespace eliminated.
       my $proname     = propath($domain, $user);
      
       #  Tie the database.
       
       my %hash;
       if(tie(%hash, 'GDBM_File', "$proname/$namespace.db",
      $how, 0640)) {
    # If this is a namespace for which a history is kept,
    # make the history log entry:    
    if (($namespace =~/^nohist\_/) && (defined($loghead))) {
       my $args = scalar @_;
       Debug(" Opening history: $namespace $args");
       my $hfh = IO::File->new(">>$proname/$namespace.hist"); 
       if($hfh) {
    my $now = time;
    print $hfh "$loghead:$now:$what\n";
       }
       $hfh->close;
    }
    return \%hash;
       } else {
    return undef;
       }
       
   }
   
   #--------------------- Request Handlers --------------------------------------------
   #
   #   By convention each request handler registers itself prior to the sub 
   #   declaration:
   #
   
   #++
   #
   #  Handles ping requests.
   #  Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $replyfd- File descriptor connected to the client
   #  Implicit Inputs:
   #      $currenthostid - Global variable that carries the name of the host we are
   #                       known as.
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit.
   #  Side effects:
   #      Reply information is sent to the client.
   
   sub ping_handler {
       my ($cmd, $tail, $client) = @_;
       Debug("$cmd $tail $client .. $currenthostid:");
      
       Reply( $client,"$currenthostid\n","$cmd:$tail");
      
       return 1;
   }
   &register_handler("ping", \&ping_handler, 0, 1, 1);       # Ping unencoded, client or manager.
   
   #++
   #
   # Handles pong requests.  Pong replies with our current host id, and
   #                         the results of a ping sent to us via our lonc.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $replyfd- File descriptor connected to the client
   #  Implicit Inputs:
   #      $currenthostid - Global variable that carries the name of the host we are
   #                       connected to.
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit.
   #  Side effects:
   #      Reply information is sent to the client.
   
   sub pong_handler {
       my ($cmd, $tail, $replyfd) = @_;
   
       my $reply=&reply("ping",$clientname);
       &Reply( $replyfd, "$currenthostid:$reply\n", "$cmd:$tail"); 
       return 1;
   }
   &register_handler("pong", \&pong_handler, 0, 1, 1);       # Pong unencoded, client or manager
   
   #++
   #      Called to establish an encrypted session key with the remote client.
   #      Note that with secure lond, in most cases this function is never
   #      invoked.  Instead, the secure session key is established either
   #      via a local file that's locked down tight and only lives for a short
   #      time, or via an ssl tunnel...and is generated from a bunch-o-random
   #      bits from /dev/urandom, rather than the predictable pattern used by
   #      by this sub.  This sub is only used in the old-style insecure
   #      key negotiation.
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $replyfd- File descriptor connected to the client
   #  Implicit Inputs:
   #      $currenthostid - Global variable that carries the name of the host
   #                       known as.
   #      $clientname    - Global variable that carries the name of the hsot we're connected to.
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit.
   #  Implicit Outputs:
   #      Reply information is sent to the client.
   #      $cipher is set with a reference to a new IDEA encryption object.
   #
   sub establish_key_handler {
       my ($cmd, $tail, $replyfd) = @_;
   
       my $buildkey=time.$$.int(rand 100000);
       $buildkey=~tr/1-6/A-F/;
       $buildkey=int(rand 100000).$buildkey.int(rand 100000);
       my $key=$currenthostid.$clientname;
       $key=~tr/a-z/A-Z/;
       $key=~tr/G-P/0-9/;
       $key=~tr/Q-Z/0-9/;
       $key=$key.$buildkey.$key.$buildkey.$key.$buildkey;
       $key=substr($key,0,32);
       my $cipherkey=pack("H32",$key);
       $cipher=new IDEA $cipherkey;
       &Reply($replyfd, "$buildkey\n", "$cmd:$tail"); 
      
       return 1;
   
   }
   &register_handler("ekey", \&establish_key_handler, 0, 1,1);
   
   
   #     Handler for the load command.  Returns the current system load average
   #     to the requestor.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $replyfd- File descriptor connected to the client
   #  Implicit Inputs:
   #      $currenthostid - Global variable that carries the name of the host
   #                       known as.
   #      $clientname    - Global variable that carries the name of the hsot we're connected to.
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit.
   #  Side effects:
   #      Reply information is sent to the client.
   sub load_handler {
       my ($cmd, $tail, $replyfd) = @_;
   
      # Get the load average from /proc/loadavg and calculate it as a percentage of
      # the allowed load limit as set by the perl global variable lonLoadLim
   
       my $loadavg;
       my $loadfile=IO::File->new('/proc/loadavg');
      
       $loadavg=<$loadfile>;
       $loadavg =~ s/\s.*//g;                      # Extract the first field only.
      
       my $loadpercent=100*$loadavg/$perlvar{'lonLoadLim'};
   
       &Reply( $replyfd, "$loadpercent\n", "$cmd:$tail");
      
       return 1;
   }
   register_handler("load", \&load_handler, 0, 1, 0);
   
   #
   #   Process the userload request.  This sub returns to the client the current
   #  user load average.  It can be invoked either by clients or managers.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $replyfd- File descriptor connected to the client
   #  Implicit Inputs:
   #      $currenthostid - Global variable that carries the name of the host
   #                       known as.
   #      $clientname    - Global variable that carries the name of the hsot we're connected to.
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit
   # Implicit inputs:
   #     whatever the userload() function requires.
   #  Implicit outputs:
   #     the reply is written to the client.
   #
   sub user_load_handler {
       my ($cmd, $tail, $replyfd) = @_;
   
       my $userloadpercent=&userload();
       &Reply($replyfd, "$userloadpercent\n", "$cmd:$tail");
       
       return 1;
   }
   register_handler("userload", \&user_load_handler, 0, 1, 0);
   
   #   Process a request for the authorization type of a user:
   #   (userauth).
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $replyfd- File descriptor connected to the client
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit
   # Implicit outputs:
   #    The user authorization type is written to the client.
   #
   sub user_authorization_type {
       my ($cmd, $tail, $replyfd) = @_;
      
       my $userinput = "$cmd:$tail";
      
       #  Pull the domain and username out of the command tail.
       # and call get_auth_type to determine the authentication type.
      
       my ($udom,$uname)=split(/:/,$tail);
       my $result = &get_auth_type($udom, $uname);
       if($result eq "nouser") {
    &Failure( $replyfd, "unknown_user\n", $userinput);
       } else {
    #
    # We only want to pass the second field from get_auth_type
    # for ^krb.. otherwise we'll be handing out the encrypted
    # password for internals e.g.
    #
    my ($type,$otherinfo) = split(/:/,$result);
    if($type =~ /^krb/) {
       $type = $result;
    }
    &Reply( $replyfd, "$type:\n", $userinput);
       }
     
       return 1;
   }
   &register_handler("currentauth", \&user_authorization_type, 1, 1, 0);
   
   #   Process a request by a manager to push a hosts or domain table 
   #   to us.  We pick apart the command and pass it on to the subs
   #   that already exist to do this.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $client - File descriptor connected to the client
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit
   # Implicit Output:
   #    a reply is written to the client.
   
   sub push_file_handler {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = "$cmd:$tail";
   
       # At this time we only know that the IP of our partner is a valid manager
       # the code below is a hook to do further authentication (e.g. to resolve
       # spoofing).
   
       my $cert = &GetCertificate($userinput);
       if(&ValidManager($cert)) { 
   
    # Now presumably we have the bona fides of both the peer host and the
    # process making the request.
         
    my $reply = &PushFile($userinput);
    &Reply($client, "$reply\n", $userinput);
   
       } else {
    &Failure( $client, "refused\n", $userinput);
       } 
       return 1;
   }
   &register_handler("pushfile", \&push_file_handler, 1, 0, 1);
   
   
   
   #   Process a reinit request.  Reinit requests that either
   #   lonc or lond be reinitialized so that an updated 
   #   host.tab or domain.tab can be processed.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $client - File descriptor connected to the client
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit
   #  Implicit output:
   #     a reply is sent to the client.
   #
   sub reinit_process_handler {
       my ($cmd, $tail, $client) = @_;
      
       my $userinput = "$cmd:$tail";
      
       my $cert = &GetCertificate($userinput);
       if(&ValidManager($cert)) {
    chomp($userinput);
    my $reply = &ReinitProcess($userinput);
    &Reply( $client,  "$reply\n", $userinput);
       } else {
    &Failure( $client, "refused\n", $userinput);
       }
       return 1;
   }
   
   &register_handler("reinit", \&reinit_process_handler, 1, 0, 1);
   
   #  Process the editing script for a table edit operation.
   #  the editing operation must be encrypted and requested by
   #  a manager host.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $client - File descriptor connected to the client
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit
   #  Implicit output:
   #     a reply is sent to the client.
   #
   sub edit_table_handler {
       my ($command, $tail, $client) = @_;
      
       my $userinput = "$command:$tail";
   
       my $cert = &GetCertificate($userinput);
       if(&ValidManager($cert)) {
    my($filetype, $script) = split(/:/, $tail);
    if (($filetype eq "hosts") || 
       ($filetype eq "domain")) {
       if($script ne "") {
    &Reply($client,              # BUGBUG - EditFile
         &EditFile($userinput), #   could fail.
         $userinput);
       } else {
    &Failure($client,"refused\n",$userinput);
       }
    } else {
       &Failure($client,"refused\n",$userinput);
    }
       } else {
    &Failure($client,"refused\n",$userinput);
       }
       return 1;
   }
   register_handler("edit", \&edit_table_handler, 1, 0, 1);
   
   
   #
   #   Authenticate a user against the LonCAPA authentication
   #   database.  Note that there are several authentication
   #   possibilities:
   #   - unix     - The user can be authenticated against the unix
   #                password file.
   #   - internal - The user can be authenticated against a purely 
   #                internal per user password file.
   #   - kerberos - The user can be authenticated against either a kerb4 or kerb5
   #                ticket granting authority.
   #   - user     - The person tailoring LonCAPA can supply a user authentication
   #                mechanism that is per system.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   #
   sub authenticate_handler {
       my ($cmd, $tail, $client) = @_;
   
       
       #  Regenerate the full input line 
       
       my $userinput  = $cmd.":".$tail;
       
       #  udom    - User's domain.
       #  uname   - Username.
       #  upass   - User's password.
       
       my ($udom,$uname,$upass)=split(/:/,$tail);
       &Debug(" Authenticate domain = $udom, user = $uname, password = $upass");
       chomp($upass);
       $upass=&unescape($upass);
   
       my $pwdcorrect = &validate_user($udom, $uname, $upass);
       if($pwdcorrect) {
    &Reply( $client, "authorized\n", $userinput);
    #
    #  Bad credentials: Failed to authorize
    #
       } else {
    &Failure( $client, "non_authorized\n", $userinput);
       }
   
       return 1;
   }
   
   register_handler("auth", \&authenticate_handler, 1, 1, 0);
   
   #
   #   Change a user's password.  Note that this function is complicated by
   #   the fact that a user may be authenticated in more than one way:
   #   At present, we are not able to change the password for all types of
   #   authentication methods.  Only for:
   #      unix    - unix password or shadow passoword style authentication.
   #      local   - Locally written authentication mechanism.
   #   For now, kerb4 and kerb5 password changes are not supported and result
   #   in an error.
   # FUTURE WORK:
   #    Support kerberos passwd changes?
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   sub change_password_handler {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = $cmd.":".$tail;           # Reconstruct client's string.
   
       #
       #  udom  - user's domain.
       #  uname - Username.
       #  upass - Current password.
       #  npass - New password.
      
       my ($udom,$uname,$upass,$npass)=split(/:/,$tail);
   
       $upass=&unescape($upass);
       $npass=&unescape($npass);
       &Debug("Trying to change password for $uname");
   
       # First require that the user can be authenticated with their
       # old password:
   
       my $validated = &validate_user($udom, $uname, $upass);
       if($validated) {
    my $realpasswd  = &get_auth_type($udom, $uname); # Defined since authd.
   
    my ($howpwd,$contentpwd)=split(/:/,$realpasswd);
    if ($howpwd eq 'internal') {
       &Debug("internal auth");
       my $salt=time;
       $salt=substr($salt,6,2);
       my $ncpass=crypt($npass,$salt);
       if(&rewrite_password_file($udom, $uname, "internal:$ncpass")) {
    &logthis("Result of password change for "
    ."$uname: pwchange_success");
    &Reply($client, "ok\n", $userinput);
       } else {
    &logthis("Unable to open $uname passwd "               
    ."to change password");
    &Failure( $client, "non_authorized\n",$userinput);
       }
    } elsif ($howpwd eq 'unix') {
       # Unix means we have to access /etc/password
       &Debug("auth is unix");
       my $execdir=$perlvar{'lonDaemons'};
       &Debug("Opening lcpasswd pipeline");
       my $pf = IO::File->new("|$execdir/lcpasswd > "
      ."$perlvar{'lonDaemons'}"
      ."/logs/lcpasswd.log");
       print $pf "$uname\n$npass\n$npass\n";
       close $pf;
       my $err = $?;
       my $result = ($err>0 ? 'pwchange_failure' : 'ok');
       &logthis("Result of password change for $uname: ".
        &lcpasswdstrerror($?));
       &Reply($client, "$result\n", $userinput);
    } else {
       # this just means that the current password mode is not
       # one we know how to change (e.g the kerberos auth modes or
       # locally written auth handler).
       #
       &Failure( $client, "auth_mode_error\n", $userinput);
    }  
   
       } else {
    &Failure( $client, "non_authorized\n", $userinput);
       }
   
       return 1;
   }
   register_handler("passwd", \&change_password_handler, 1, 1, 0);
   
   
   #
   #   Create a new user.  User in this case means a lon-capa user.
   #   The user must either already exist in some authentication realm
   #   like kerberos or the /etc/passwd.  If not, a user completely local to
   #   this loncapa system is created.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   sub add_user_handler {
   
       my ($cmd, $tail, $client) = @_;
   
   
       my ($udom,$uname,$umode,$npass)=split(/:/,$tail);
       my $userinput = $cmd.":".$tail; # Reconstruct the full request line.
   
       &Debug("cmd =".$cmd." $udom =".$udom." uname=".$uname);
   
   
       if($udom eq $currentdomainid) { # Reject new users for other domains...
   
    my $oldumask=umask(0077);
    chomp($npass);
    $npass=&unescape($npass);
    my $passfilename  = &password_path($udom, $uname);
    &Debug("Password file created will be:".$passfilename);
    if (-e $passfilename) {
       &Failure( $client, "already_exists\n", $userinput);
    } else {
       my @fpparts=split(/\//,$passfilename);
       my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2];
       my $fperror='';
       for (my $i=3;$i<= ($#fpparts-1);$i++) {
    $fpnow.='/'.$fpparts[$i]; 
    unless (-e $fpnow) {
       &logthis("mkdir $fpnow");
       unless (mkdir($fpnow,0777)) {
    $fperror="error: ".($!+0)." mkdir failed while attempting "
       ."makeuser";
       }
    }
       }
       unless ($fperror) {
    my $result=&make_passwd_file($uname, $umode,$npass, $passfilename);
    &Reply($client, $result, $userinput);     #BUGBUG - could be fail
       } else {
    &Failure($client, "$fperror\n", $userinput);
       }
    }
    umask($oldumask);
       }  else {
    &Failure($client, "not_right_domain\n",
    $userinput); # Even if we are multihomed.
       
       }
       return 1;
   
   }
   &register_handler("makeuser", \&add_user_handler, 1, 1, 0);
   
   #
   #   Change the authentication method of a user.  Note that this may
   #   also implicitly change the user's password if, for example, the user is
   #   joining an existing authentication realm.  Known authentication realms at
   #   this time are:
   #    internal   - Purely internal password file (only loncapa knows this user)
   #    local      - Institutionally written authentication module.
   #    unix       - Unix user (/etc/passwd with or without /etc/shadow).
   #    kerb4      - kerberos version 4
   #    kerb5      - kerberos version 5
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   #
   sub change_authentication_handler {
   
       my ($cmd, $tail, $client) = @_;
      
       my $userinput  = "$cmd:$tail";              # Reconstruct user input.
   
       my ($udom,$uname,$umode,$npass)=split(/:/,$tail);
       &Debug("cmd = ".$cmd." domain= ".$udom."uname =".$uname." umode= ".$umode);
       if ($udom ne $currentdomainid) {
    &Failure( $client, "not_right_domain\n", $client);
       } else {
   
    chomp($npass);
   
    $npass=&unescape($npass);
    my $passfilename = &password_path($udom, $uname);
    if ($passfilename) { # Not allowed to create a new user!!
       my $result=&make_passwd_file($uname, $umode,$npass,$passfilename);
       &Reply($client, $result, $userinput);
    } else {       
       &Failure($client, "non_authorized", $userinput); # Fail the user now.
    }
       }
       return 1;
   }
   &register_handler("changeuserauth", \&change_authentication_handler, 1,1, 0);
   
   #
   #   Determines if this is the home server for a user.  The home server
   #   for a user will have his/her lon-capa passwd file.  Therefore all we need
   #   to do is determine if this file exists.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   #
   sub is_home_handler {
       my ($cmd, $tail, $client) = @_;
      
       my $userinput  = "$cmd:$tail";
      
       my ($udom,$uname)=split(/:/,$tail);
       chomp($uname);
       my $passfile = &password_filename($udom, $uname);
       if($passfile) {
    &Reply( $client, "found\n", $userinput);
       } else {
    &Failure($client, "not_found\n", $userinput);
       }
       return 1;
   }
   &register_handler("home", \&is_home_handler, 0,1,0);
   
   #
   #   Process an update request for a resource?? I think what's going on here is
   #   that a resource has been modified that we hold a subscription to.
   #   If the resource is not local, then we must update, or at least invalidate our
   #   cached copy of the resource. 
   #   FUTURE WORK:
   #      I need to look at this logic carefully.  My druthers would be to follow
   #      typical caching logic, and simple invalidate the cache, drop any subscription
   #      an let the next fetch start the ball rolling again... however that may
   #      actually be more difficult than it looks given the complex web of
   #      proxy servers.
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   #
   sub update_resource_handler {
   
       my ($cmd, $tail, $client) = @_;
      
       my $userinput = "$cmd:$tail";
      
       my $fname= $tail; # This allows interactive testing
   
   
       my $ownership=ishome($fname);
       if ($ownership eq 'not_owner') {
    if (-e $fname) {
       my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size,
    $atime,$mtime,$ctime,$blksize,$blocks)=stat($fname);
       my $now=time;
       my $since=$now-$atime;
       if ($since>$perlvar{'lonExpire'}) {
    my $reply=&reply("unsub:$fname","$clientname");
    unlink("$fname");
       } else {
    my $transname="$fname.in.transfer";
    my $remoteurl=&reply("sub:$fname","$clientname");
    my $response;
    alarm(120);
    {
       my $ua=new LWP::UserAgent;
       my $request=new HTTP::Request('GET',"$remoteurl");
       $response=$ua->request($request,$transname);
    }
    alarm(0);
    if ($response->is_error()) {
       unlink($transname);
       my $message=$response->status_line;
       &logthis("LWP GET: $message for $fname ($remoteurl)");
    } else {
       if ($remoteurl!~/\.meta$/) {
    alarm(120);
    {
       my $ua=new LWP::UserAgent;
       my $mrequest=new HTTP::Request('GET',$remoteurl.'.meta');
       my $mresponse=$ua->request($mrequest,$fname.'.meta');
       if ($mresponse->is_error()) {
    unlink($fname.'.meta');
       }
    }
    alarm(0);
       }
       rename($transname,$fname);
    }
       }
       &Reply( $client, "ok\n", $userinput);
    } else {
       &Failure($client, "not_found\n", $userinput);
    }
       } else {
    &Failure($client, "rejected\n", $userinput);
       }
       return 1;
   }
   &register_handler("update", \&update_resource_handler, 0 ,1, 0);
   
   #
   #   Fetch a user file from a remote server to the user's home directory
   #   userfiles subdir.
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub fetch_user_file_handler {
   
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = "$cmd:$tail";
       my $fname           = $tail;
       my ($udom,$uname,$ufile)=split(/\//,$fname);
       my $udir=&propath($udom,$uname).'/userfiles';
       unless (-e $udir) {
    mkdir($udir,0770); 
       }
       if (-e $udir) {
    $ufile=~s/^[\.\~]+//;
    $ufile=~s/\///g;
    my $destname=$udir.'/'.$ufile;
    my $transname=$udir.'/'.$ufile.'.in.transit';
    my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;
    my $response;
    alarm(120);
    {
       my $ua=new LWP::UserAgent;
       my $request=new HTTP::Request('GET',"$remoteurl");
       $response=$ua->request($request,$transname);
    }
    alarm(0);
    if ($response->is_error()) {
       unlink($transname);
       my $message=$response->status_line;
       &logthis("LWP GET: $message for $fname ($remoteurl)");
       &Failure($client, "failed\n", $userinput);
    } else {
       if (!rename($transname,$destname)) {
    &logthis("Unable to move $transname to $destname");
    unlink($transname);
    &Failure($client, "failed\n", $userinput);
       } else {
    &Reply($client, "ok\n", $userinput);
       }
    }   
       } else {
    &Failure($client, "not_home\n", $userinput);
       }
       return 1;
   }
   &register_handler("fetchuserfile", \&fetch_user_file_handler, 0, 1, 0);
   
   #
   #   Remove a file from a user's home directory userfiles subdirectory.
   # Parameters:
   #    cmd   - the Lond request keyword that got us here.
   #    tail  - the part of the command past the keyword.
   #    client- File descriptor connected with the client.
   #
   # Returns:
   #    1    - Continue processing.
   
   sub remove_user_file_handler {
       my ($cmd, $tail, $client) = @_;
   
       my ($fname) = split(/:/, $tail); # Get rid of any tailing :'s lonc may have sent.
   
       my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|);
       if ($ufile =~m|/\.\./|) {
    # any files paths with /../ in them refuse 
    # to deal with
    &Failure($client, "refused\n", "$cmd:$tail");
       } else {
    my $udir = &propath($udom,$uname);
    if (-e $udir) {
       my $file=$udir.'/userfiles/'.$ufile;
       if (-e $file) {
    unlink($file);
    if (-e $file) {
       &Failure($client, "failed\n", "$cmd:$tail");
    } else {
       &Reply($client, "ok\n", "$cmd:$tail");
    }
       } else {
    &Failure($client, "not_found\n", "$cmd:$tail");
       }
    } else {
       &Failure($client, "not_home\n", "$cmd:$tail");
    }
       }
       return 1;
   }
   &register_handler("removeuserfile", \&remove_user_file_handler, 0,1,0);
   
   
   #
   #  Authenticate access to a user file by checking the user's 
   #  session token(?)
   #
   # Parameters:
   #   cmd      - The request keyword that dispatched to tus.
   #   tail     - The tail of the request (colon separated parameters).
   #   client   - Filehandle open on the client.
   # Return:
   #    1.
   
   sub token_auth_user_file_handler {
       my ($cmd, $tail, $client) = @_;
   
       my ($fname, $session) = split(/:/, $tail);
       
       chomp($session);
       my $reply='non_auth';
       if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'.
        $session.'.id')) {
    while (my $line=<ENVIN>) {
       if ($line=~ m|userfile\.\Q$fname\E\=|) { $reply='ok'; }
    }
    close(ENVIN);
    &Reply($client, $reply);
       } else {
    &Failure($client, "invalid_token\n", "$cmd:$tail");
       }
       return 1;
   
   }
   
   &register_handler("tokenauthuserfile", \&token_auth_user_file_handler, 0,1,0);
   #---------------------------------------------------------------
   #
   #   Getting, decoding and dispatching requests:
   #
   
   #
   #   Get a Request:
   #   Gets a Request message from the client.  The transaction
   #   is defined as a 'line' of text.  We remove the new line
   #   from the text line.  
   #
   sub get_request {
       my $input = <$client>;
       chomp($input);
   
       Debug("get_request: Request = $input\n");
   
       &status('Processing '.$clientname.':'.$input);
   
       return $input;
   }
   #---------------------------------------------------------------
   #
   #  Process a request.  This sub should shrink as each action
   #  gets farmed out into a separat sub that is registered 
   #  with the dispatch hash.  
   #
   # Parameters:
   #    user_input   - The request received from the client (lonc).
   # Returns:
   #    true to keep processing, false if caller should exit.
   #
   sub process_request {
       my ($userinput) = @_;      # Easier for now to break style than to
                                   # fix all the userinput -> user_input.
       my $wasenc    = 0; # True if request was encrypted.
   # ------------------------------------------------------------ See if encrypted
       if ($userinput =~ /^enc/) {
    $userinput = decipher($userinput);
    $wasenc=1;
    if(!$userinput) { # Cipher not defined.
       &Failure($client, "error: Encrypted data without negotated key");
       return 0;
    }
       }
       Debug("process_request: $userinput\n");
       
       #  
       #   The 'correct way' to add a command to lond is now to
       #   write a sub to execute it and Add it to the command dispatch
       #   hash via a call to register_handler..  The comments to that
       #   sub should give you enough to go on to show how to do this
       #   along with the examples that are building up as this code
       #   is getting refactored.   Until all branches of the
       #   if/elseif monster below have been factored out into
       #   separate procesor subs, if the dispatch hash is missing
       #   the command keyword, we will fall through to the remainder
       #   of the if/else chain below in order to keep this thing in 
       #   working order throughout the transmogrification.
   
       my ($command, $tail) = split(/:/, $userinput, 2);
       chomp($command);
       chomp($tail);
       $tail =~ s/(\r)//; # This helps people debugging with e.g. telnet.
       $command =~ s/(\r)//; # And this too for parameterless commands.
       if(!$tail) {
    $tail =""; # defined but blank.
       }
   
       &Debug("Command received: $command, encoded = $wasenc");
   
       if(defined $Dispatcher{$command}) {
   
    my $dispatch_info = $Dispatcher{$command};
    my $handler       = $$dispatch_info[0];
    my $need_encode   = $$dispatch_info[1];
    my $client_types  = $$dispatch_info[2];
    Debug("Matched dispatch hash: mustencode: $need_encode "
         ."ClientType $client_types");
         
    #  Validate the request:
         
    my $ok = 1;
    my $requesterprivs = 0;
    if(&isClient()) {
       $requesterprivs |= $CLIENT_OK;
    }
    if(&isManager()) {
       $requesterprivs |= $MANAGER_OK;
    }
    if($need_encode && (!$wasenc)) {
       Debug("Must encode but wasn't: $need_encode $wasenc");
       $ok = 0;
    }
    if(($client_types & $requesterprivs) == 0) {
       Debug("Client not privileged to do this operation");
       $ok = 0;
    }
   
    if($ok) {
       Debug("Dispatching to handler $command $tail");
       my $keep_going = &$handler($command, $tail, $client);
       return $keep_going;
    } else {
       Debug("Refusing to dispatch because client did not match requirements");
       Failure($client, "refused\n", $userinput);
       return 1;
    }
   
       }    
   
   #------------------- Commands not yet in spearate handlers. --------------
   
   
   
   # ----------------------------------------------------------------- unsubscribe
       if ($userinput =~ /^unsub/) {
    if(isClient) {
       my ($cmd,$fname)=split(/:/,$userinput);
       if (-e $fname) {
    print $client &unsub($fname,$clientip);
       } else {
    print $client "not_found\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------- subscribe
       } elsif ($userinput =~ /^sub/) {
    if(isClient) {
       print $client &subscribe($userinput,$clientip);
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------- current version
       } elsif ($userinput =~ /^currentversion/) {
    if(isClient) {
       my ($cmd,$fname)=split(/:/,$userinput);
       print $client &currentversion($fname)."\n";
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------------- log
       } elsif ($userinput =~ /^log/) {
    if(isClient) {
       my ($cmd,$udom,$uname,$what)=split(/:/,$userinput);
       chomp($what);
       my $proname=propath($udom,$uname);
       my $now=time;
       {
    my $hfh;
    if ($hfh=IO::File->new(">>$proname/activity.log")) { 
       print $hfh "$now:$clientname:$what\n";
       print $client "ok\n"; 
    } else {
       print $client "error: ".($!+0)
    ." IO::File->new Failed "
    ."while attempting log\n";
    }
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------------- put
       } elsif ($userinput =~ /^put/) {
    if(isClient) {
       my ($cmd,$udom,$uname,$namespace,$what)
    =split(/:/,$userinput,5);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       if ($namespace ne 'roles') {
    chomp($what);
    my $proname=propath($udom,$uname);
    my $now=time;
    my @pairs=split(/\&/,$what);
    my %hash;
    if (tie(%hash,'GDBM_File',
    "$proname/$namespace.db",
    &GDBM_WRCREAT(),0640)) {
       unless ($namespace=~/^nohist\_/) {
    my $hfh;
    if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { print $hfh "P:$now:$what\n"; }
       }
       
       foreach my $pair (@pairs) {
    my ($key,$value)=split(/=/,$pair);
    $hash{$key}=$value;
       }
       if (untie(%hash)) {
    print $client "ok\n";
       } else {
    print $client "error: ".($!+0)
       ." untie(GDBM) failed ".
       "while attempting put\n";
       }
    } else {
       print $client "error: ".($!)
    ." tie(GDBM) Failed ".
    "while attempting put\n";
    }
       } else {
    print $client "refused\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------- inc
       } elsif ($userinput =~ /^inc:/) {
    if(isClient) {
       my ($cmd,$udom,$uname,$namespace,$what)
    =split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       if ($namespace ne 'roles') {
    chomp($what);
    my $proname=propath($udom,$uname);
    my $now=time;
    my @pairs=split(/\&/,$what);
    my %hash;
    if (tie(%hash,'GDBM_File',
    "$proname/$namespace.db",
    &GDBM_WRCREAT(),0640)) {
       unless ($namespace=~/^nohist\_/) {
    my $hfh;
    if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { print $hfh "P:$now:$what\n"; }
       }
       foreach my $pair (@pairs) {
    my ($key,$value)=split(/=/,$pair);
    # We could check that we have a number...
    if (! defined($value) || $value eq '') {
       $value = 1;
    }
    $hash{$key}+=$value;
       }
       if (untie(%hash)) {
    print $client "ok\n";
       } else {
    print $client "error: ".($!+0)
       ." untie(GDBM) failed ".
       "while attempting inc\n";
       }
    } else {
       print $client "error: ".($!)
    ." tie(GDBM) Failed ".
    "while attempting inc\n";
    }
       } else {
    print $client "refused\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # -------------------------------------------------------------------- rolesput
       } elsif ($userinput =~ /^rolesput/) {
    if(isClient) {
       &Debug("rolesput");
       if ($wasenc==1) {
    my ($cmd,$exedom,$exeuser,$udom,$uname,$what)
       =split(/:/,$userinput);
    &Debug("cmd = ".$cmd." exedom= ".$exedom.
          "user = ".$exeuser." udom=".$udom.
          "what = ".$what);
    my $namespace='roles';
    chomp($what);
    my $proname=propath($udom,$uname);
    my $now=time;
    my @pairs=split(/\&/,$what);
    my %hash;
    if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {
       {
    my $hfh;
    if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { 
       print $hfh "P:$now:$exedom:$exeuser:$what\n";
    }
       }
       
       foreach my $pair (@pairs) {
    my ($key,$value)=split(/=/,$pair);
    &ManagePermissions($key, $udom, $uname,
      &get_auth_type( $udom, 
    $uname));
    $hash{$key}=$value;
       }
       if (untie(%hash)) {
    print $client "ok\n";
       } else {
    print $client "error: ".($!+0)
       ." untie(GDBM) Failed ".
       "while attempting rolesput\n";
       }
    } else {
       print $client "error: ".($!+0)
    ." tie(GDBM) Failed ".
    "while attempting rolesput\n";
       }
       } else {
    print $client "refused\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # -------------------------------------------------------------------- rolesdel
       } elsif ($userinput =~ /^rolesdel/) {
    if(isClient) {
       &Debug("rolesdel");
       if ($wasenc==1) {
    my ($cmd,$exedom,$exeuser,$udom,$uname,$what)
       =split(/:/,$userinput);
    &Debug("cmd = ".$cmd." exedom= ".$exedom.
          "user = ".$exeuser." udom=".$udom.
          "what = ".$what);
    my $namespace='roles';
    chomp($what);
    my $proname=propath($udom,$uname);
    my $now=time;
    my @rolekeys=split(/\&/,$what);
    my %hash;
    if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {
       {
    my $hfh;
    if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { 
       print $hfh "D:$now:$exedom:$exeuser:$what\n";
    }
       }
       foreach my $key (@rolekeys) {
    delete $hash{$key};
       }
       if (untie(%hash)) {
    print $client "ok\n";
       } else {
    print $client "error: ".($!+0)
       ." untie(GDBM) Failed ".
       "while attempting rolesdel\n";
       }
    } else {
       print $client "error: ".($!+0)
    ." tie(GDBM) Failed ".
    "while attempting rolesdel\n";
    }
       } else {
    print $client "refused\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------------- get
       } elsif ($userinput =~ /^get/) {
    if(isClient) {
       my ($cmd,$udom,$uname,$namespace,$what)
    =split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       chomp($what);
       my @queries=split(/\&/,$what);
       my $proname=propath($udom,$uname);
       my $qresult='';
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {
    for (my $i=0;$i<=$#queries;$i++) {
       $qresult.="$hash{$queries[$i]}&";
    }
    if (untie(%hash)) {
       $qresult=~s/\&$//;
       print $client "$qresult\n";
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting get\n";
    }
       } else {
    if ($!+0 == 2) {
       print $client "error:No such file or ".
    "GDBM reported bad block error\n";
    } else {
       print $client "error: ".($!+0)
    ." tie(GDBM) Failed ".
    "while attempting get\n";
    }
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------------ eget
       } elsif ($userinput =~ /^eget/) {
    if (isClient) {
       my ($cmd,$udom,$uname,$namespace,$what)
    =split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       chomp($what);
       my @queries=split(/\&/,$what);
       my $proname=propath($udom,$uname);
       my $qresult='';
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {
    for (my $i=0;$i<=$#queries;$i++) {
       $qresult.="$hash{$queries[$i]}&";
    }
    if (untie(%hash)) {
       $qresult=~s/\&$//;
       if ($cipher) {
    my $cmdlength=length($qresult);
    $qresult.="         ";
    my $encqresult='';
    for 
       (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {
    $encqresult.=
       unpack("H16",
      $cipher->encrypt(substr($qresult,$encidx,8)));
       }
    print $client "enc:$cmdlength:$encqresult\n";
       } else {
    print $client "error:no_key\n";
       }
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting eget\n";
    }
       } else {
    print $client "error: ".($!+0)
       ." tie(GDBM) Failed ".
       "while attempting eget\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------------- del
       } elsif ($userinput =~ /^del/) {
    if(isClient) {
       my ($cmd,$udom,$uname,$namespace,$what)
    =split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       chomp($what);
       my $proname=propath($udom,$uname);
       my $now=time;
       my @keys=split(/\&/,$what);
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {
    unless ($namespace=~/^nohist\_/) {
       my $hfh;
       if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { print $hfh "D:$now:$what\n"; }
    }
    foreach my $key (@keys) {
       delete($hash{$key});
    }
    if (untie(%hash)) {
       print $client "ok\n";
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting del\n";
    }
       } else {
    print $client "error: ".($!+0)
       ." tie(GDBM) Failed ".
       "while attempting del\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------------ keys
       } elsif ($userinput =~ /^keys/) {
    if(isClient) {
       my ($cmd,$udom,$uname,$namespace)
    =split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       my $proname=propath($udom,$uname);
       my $qresult='';
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {
    foreach my $key (keys %hash) {
       $qresult.="$key&";
    }
    if (untie(%hash)) {
       $qresult=~s/\&$//;
       print $client "$qresult\n";
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting keys\n";
    }
       } else {
    print $client "error: ".($!+0)
       ." tie(GDBM) Failed ".
       "while attempting keys\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ----------------------------------------------------------------- dumpcurrent
       } elsif ($userinput =~ /^currentdump/) {
    if (isClient) {
       my ($cmd,$udom,$uname,$namespace)
    =split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       my $qresult='';
       my $proname=propath($udom,$uname);
       my %hash;
       if (tie(%hash,'GDBM_File',
       "$proname/$namespace.db",
       &GDBM_READER(),0640)) {
       # Structure of %data:
    # $data{$symb}->{$parameter}=$value;
    # $data{$symb}->{'v.'.$parameter}=$version;
    # since $parameter will be unescaped, we do not
    # have to worry about silly parameter names...
    my %data = ();
    while (my ($key,$value) = each(%hash)) {
       my ($v,$symb,$param) = split(/:/,$key);
       next if ($v eq 'version' || $symb eq 'keys');
       next if (exists($data{$symb}) && 
        exists($data{$symb}->{$param}) &&
        $data{$symb}->{'v.'.$param} > $v);
       $data{$symb}->{$param}=$value;
       $data{$symb}->{'v.'.$param}=$v;
    }
    if (untie(%hash)) {
       while (my ($symb,$param_hash) = each(%data)) {
    while(my ($param,$value) = each (%$param_hash)){
       next if ($param =~ /^v\./);
       $qresult.=$symb.':'.$param.'='.$value.'&';
    }
       }
       chop($qresult);
       print $client "$qresult\n";
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting currentdump\n";
    }
       } else {
    print $client "error: ".($!+0)
       ." tie(GDBM) Failed ".
       "while attempting currentdump\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
    }
   # ------------------------------------------------------------------------ dump
       } elsif ($userinput =~ /^dump/) {
    if(isClient) {
       my ($cmd,$udom,$uname,$namespace,$regexp)
    =split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       if (defined($regexp)) {
    $regexp=&unescape($regexp);
       } else {
    $regexp='.';
       }
       my $qresult='';
       my $proname=propath($udom,$uname);
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {
    while (my ($key,$value) = each(%hash)) {
       if ($regexp eq '.') {
    $qresult.=$key.'='.$value.'&';
       } else {
    my $unescapeKey = &unescape($key);
    if (eval('$unescapeKey=~/$regexp/')) {
       $qresult.="$key=$value&";
    }
       }
    }
    if (untie(%hash)) {
       chop($qresult);
       print $client "$qresult\n";
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting dump\n";
    }
       } else {
    print $client "error: ".($!+0)
       ." tie(GDBM) Failed ".
       "while attempting dump\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ----------------------------------------------------------------------- store
       } elsif ($userinput =~ /^store/) {
    if(isClient) {
       my ($cmd,$udom,$uname,$namespace,$rid,$what)
    =split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       if ($namespace ne 'roles') {
    chomp($what);
    my $proname=propath($udom,$uname);
    my $now=time;
    my @pairs=split(/\&/,$what);
    my %hash;
    if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {
       unless ($namespace=~/^nohist\_/) {
    my $hfh;
    if ($hfh=IO::File->new(">>$proname/$namespace.hist")) {
       print $hfh "P:$now:$rid:$what\n";
    }
       }
       my @previouskeys=split(/&/,$hash{"keys:$rid"});
       my $key;
       $hash{"version:$rid"}++;
       my $version=$hash{"version:$rid"};
       my $allkeys=''; 
       foreach my $pair (@pairs) {
    my ($key,$value)=split(/=/,$pair);
    $allkeys.=$key.':';
    $hash{"$version:$rid:$key"}=$value;
       }
       $hash{"$version:$rid:timestamp"}=$now;
       $allkeys.='timestamp';
       $hash{"$version:keys:$rid"}=$allkeys;
       if (untie(%hash)) {
    print $client "ok\n";
       } else {
    print $client "error: ".($!+0)
       ." untie(GDBM) Failed ".
       "while attempting store\n";
    }
    } else {
       print $client "error: ".($!+0)
    ." tie(GDBM) Failed ".
    "while attempting store\n";
    }
       } else {
    print $client "refused\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # --------------------------------------------------------------------- restore
       } elsif ($userinput =~ /^restore/) {
    if(isClient) {
       my ($cmd,$udom,$uname,$namespace,$rid)
    =split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       chomp($rid);
       my $proname=propath($udom,$uname);
       my $qresult='';
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {
    my $version=$hash{"version:$rid"};
    $qresult.="version=$version&";
    my $scope;
    for ($scope=1;$scope<=$version;$scope++) {
       my $vkeys=$hash{"$scope:keys:$rid"};
       my @keys=split(/:/,$vkeys);
       my $key;
       $qresult.="$scope:keys=$vkeys&";
       foreach $key (@keys) {
    $qresult.="$scope:$key=".$hash{"$scope:$rid:$key"}."&";
       }                                  
    }
    if (untie(%hash)) {
       $qresult=~s/\&$//;
       print $client "$qresult\n";
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting restore\n";
    }
       } else {
    print $client "error: ".($!+0)
       ." tie(GDBM) Failed ".
       "while attempting restore\n";
       }
    } else  {
       Reply($client, "refused\n", $userinput);
       
    }
   # -------------------------------------------------------------------- chatsend
       } elsif ($userinput =~ /^chatsend/) {
    if(isClient) {
       my ($cmd,$cdom,$cnum,$newpost)=split(/\:/,$userinput);
       &chatadd($cdom,$cnum,$newpost);
       print $client "ok\n";
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # -------------------------------------------------------------------- chatretr
       } elsif ($userinput =~ /^chatretr/) {
    if(isClient) {
       my 
    ($cmd,$cdom,$cnum,$udom,$uname)=split(/\:/,$userinput);
       my $reply='';
       foreach (&getchat($cdom,$cnum,$udom,$uname)) {
    $reply.=&escape($_).':';
       }
       $reply=~s/\:$//;
       print $client $reply."\n";
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------- querysend
       } elsif ($userinput =~ /^querysend/) {
    if (isClient) {
       my ($cmd,$query,
    $arg1,$arg2,$arg3)=split(/\:/,$userinput);
       $query=~s/\n*$//g;
       print $client "".
    sqlreply("$clientname\&$query".
    "\&$arg1"."\&$arg2"."\&$arg3")."\n";
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------ queryreply
       } elsif ($userinput =~ /^queryreply/) {
    if(isClient) {
       my ($cmd,$id,$reply)=split(/:/,$userinput); 
       my $store;
       my $execdir=$perlvar{'lonDaemons'};
       if ($store=IO::File->new(">$execdir/tmp/$id")) {
    $reply=~s/\&/\n/g;
    print $store $reply;
    close $store;
    my $store2=IO::File->new(">$execdir/tmp/$id.end");
    print $store2 "done\n";
    close $store2;
    print $client "ok\n";
       } else {
    print $client "error: ".($!+0)
       ." IO::File->new Failed ".
       "while attempting queryreply\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ----------------------------------------------------------------- courseidput
       } elsif ($userinput =~ /^courseidput/) {
    if(isClient) {
       my ($cmd,$udom,$what)=split(/:/,$userinput);
       chomp($what);
    $udom=~s/\W//g;
       my $proname=
    "$perlvar{'lonUsersDir'}/$udom/nohist_courseids";
       my $now=time;
       my @pairs=split(/\&/,$what);
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) {
    foreach my $pair (@pairs) {
       my ($key,$descr,$inst_code)=split(/=/,$pair);
       $hash{$key}=$descr.':'.$inst_code.':'.$now;
    }
    if (untie(%hash)) {
       print $client "ok\n";
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting courseidput\n";
    }
       } else {
    print $client "error: ".($!+0)
       ." tie(GDBM) Failed ".
       "while attempting courseidput\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ---------------------------------------------------------------- courseiddump
       } elsif ($userinput =~ /^courseiddump/) {
    if(isClient) {
       my ($cmd,$udom,$since,$description)
    =split(/:/,$userinput);
       if (defined($description)) {
    $description=&unescape($description);
       } else {
    $description='.';
       }
       unless (defined($since)) { $since=0; }
       my $qresult='';
       my $proname=
    "$perlvar{'lonUsersDir'}/$udom/nohist_courseids";
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) {
    while (my ($key,$value) = each(%hash)) {
       my ($descr,$lasttime,$inst_code);
       if ($value =~ m/^([^\:]*):([^\:]*):(\d+)$/) {
    ($descr,$inst_code,$lasttime)=($1,$2,$3);
       } else {
    ($descr,$lasttime) = split(/\:/,$value);
       }
       if ($lasttime<$since) { next; }
       if ($description eq '.') {
    $qresult.=$key.'='.$descr.':'.$inst_code.'&';
       } else {
    my $unescapeVal = &unescape($descr);
    if (eval('$unescapeVal=~/\Q$description\E/i')) {
       $qresult.=$key.'='.$descr.':'.$inst_code.'&';
    }
       }
    }
    if (untie(%hash)) {
       chop($qresult);
       print $client "$qresult\n";
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting courseiddump\n";
    }
       } else {
    print $client "error: ".($!+0)
       ." tie(GDBM) Failed ".
       "while attempting courseiddump\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ----------------------------------------------------------------------- idput
       } elsif ($userinput =~ /^idput/) {
    if(isClient) {
       my ($cmd,$udom,$what)=split(/:/,$userinput);
       chomp($what);
       $udom=~s/\W//g;
       my $proname="$perlvar{'lonUsersDir'}/$udom/ids";
       my $now=time;
       my @pairs=split(/\&/,$what);
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) {
    {
       my $hfh;
       if ($hfh=IO::File->new(">>$proname.hist")) {
    print $hfh "P:$now:$what\n";
       }
    }
    foreach my $pair (@pairs) {
       my ($key,$value)=split(/=/,$pair);
       $hash{$key}=$value;
    }
    if (untie(%hash)) {
       print $client "ok\n";
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting idput\n";
    }
       } else {
    print $client "error: ".($!+0)
       ." tie(GDBM) Failed ".
       "while attempting idput\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ----------------------------------------------------------------------- idget
       } elsif ($userinput =~ /^idget/) {
    if(isClient) {
       my ($cmd,$udom,$what)=split(/:/,$userinput);
       chomp($what);
       $udom=~s/\W//g;
       my $proname="$perlvar{'lonUsersDir'}/$udom/ids";
       my @queries=split(/\&/,$what);
       my $qresult='';
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) {
    for (my $i=0;$i<=$#queries;$i++) {
       $qresult.="$hash{$queries[$i]}&";
    }
    if (untie(%hash)) {
       $qresult=~s/\&$//;
       print $client "$qresult\n";
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting idget\n";
    }
       } else {
    print $client "error: ".($!+0)
       ." tie(GDBM) Failed ".
       "while attempting idget\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ---------------------------------------------------------------------- tmpput
       } elsif ($userinput =~ /^tmpput/) {
    if(isClient) {
       my ($cmd,$what)=split(/:/,$userinput);
       my $store;
       $tmpsnum++;
       my $id=$$.'_'.$clientip.'_'.$tmpsnum;
       $id=~s/\W/\_/g;
       $what=~s/\n//g;
       my $execdir=$perlvar{'lonDaemons'};
       if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) {
    print $store $what;
    close $store;
    print $client "$id\n";
       }
       else {
    print $client "error: ".($!+0)
       ."IO::File->new Failed ".
       "while attempting tmpput\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   
   # ---------------------------------------------------------------------- tmpget
       } elsif ($userinput =~ /^tmpget/) {
    if(isClient) {
       my ($cmd,$id)=split(/:/,$userinput);
       chomp($id);
       $id=~s/\W/\_/g;
       my $store;
       my $execdir=$perlvar{'lonDaemons'};
       if ($store=IO::File->new("$execdir/tmp/$id.tmp")) {
    my $reply=<$store>;
       print $client "$reply\n";
    close $store;
       }
       else {
    print $client "error: ".($!+0)
       ."IO::File->new Failed ".
       "while attempting tmpget\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ---------------------------------------------------------------------- tmpdel
       } elsif ($userinput =~ /^tmpdel/) {
    if(isClient) {
       my ($cmd,$id)=split(/:/,$userinput);
       chomp($id);
       $id=~s/\W/\_/g;
       my $execdir=$perlvar{'lonDaemons'};
       if (unlink("$execdir/tmp/$id.tmp")) {
    print $client "ok\n";
       } else {
    print $client "error: ".($!+0)
       ."Unlink tmp Failed ".
       "while attempting tmpdel\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ----------------------------------------- portfolio directory list (portls)
       } elsif ($userinput =~ /^portls/) {
    if(isClient) {
       my ($cmd,$uname,$udom)=split(/:/,$userinput);
       my $udir=propath($udom,$uname).'/userfiles/portfolio';
       my $dirLine='';
       my $dirContents='';
       if (opendir(LSDIR,$udir.'/')){
    while ($dirLine = readdir(LSDIR)){
       $dirContents = $dirContents.$dirLine.'<br />';
    }
       } else {
    $dirContents = "No directory found\n";
       }
       print $client $dirContents."\n";
    } else {
       Reply($client, "refused\n", $userinput);
    }
   # -------------------------------------------------------------------------- ls
       } elsif ($userinput =~ /^ls/) {
    if(isClient) {
       my $obs;
       my $rights;
       my ($cmd,$ulsdir)=split(/:/,$userinput);
       my $ulsout='';
       my $ulsfn;
       if (-e $ulsdir) {
    if(-d $ulsdir) {
       if (opendir(LSDIR,$ulsdir)) {
    while ($ulsfn=readdir(LSDIR)) {
       undef $obs, $rights; 
       my @ulsstats=stat($ulsdir.'/'.$ulsfn);
       #We do some obsolete checking here
       if(-e $ulsdir.'/'.$ulsfn.".meta") { 
    open(FILE, $ulsdir.'/'.$ulsfn.".meta");
    my @obsolete=<FILE>;
    foreach my $obsolete (@obsolete) {
       if($obsolete =~ m|(<obsolete>)(on)|) { $obs = 1; } 
       if($obsolete =~ m|(<copyright>)(default)|) { $rights = 1; }
    }
       }
       $ulsout.=$ulsfn.'&'.join('&',@ulsstats);
       if($obs eq '1') { $ulsout.="&1"; }
       else { $ulsout.="&0"; }
       if($rights eq '1') { $ulsout.="&1:"; }
       else { $ulsout.="&0:"; }
    }
    closedir(LSDIR);
       }
    } else {
       my @ulsstats=stat($ulsdir);
       $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
    }
       } else {
    $ulsout='no_such_dir';
       }
       if ($ulsout eq '') { $ulsout='empty'; }
       print $client "$ulsout\n";
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ----------------------------------------------------------------- setannounce
       } elsif ($userinput =~ /^setannounce/) {
    if (isClient) {
       my ($cmd,$announcement)=split(/:/,$userinput);
       chomp($announcement);
       $announcement=&unescape($announcement);
       if (my $store=IO::File->new('>'.$perlvar{'lonDocRoot'}.
    '/announcement.txt')) {
    print $store $announcement;
    close $store;
    print $client "ok\n";
       } else {
    print $client "error: ".($!+0)."\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------ Hanging up
       } elsif (($userinput =~ /^exit/) ||
        ($userinput =~ /^init/)) { # no restrictions.
    &logthis(
    "Client $clientip ($clientname) hanging up: $userinput");
    print $client "bye\n";
    $client->shutdown(2);        # shutdown the socket forcibly.
    $client->close();
    return 0;
   
   # ---------------------------------- set current host/domain
       } elsif ($userinput =~ /^sethost:/) {
    if (isClient) {
       print $client &sethost($userinput)."\n";
    } else {
       print $client "refused\n";
    }
   #---------------------------------- request file (?) version.
       } elsif ($userinput =~/^version:/) {
    if (isClient) {
       print $client &version($userinput)."\n";
    } else {
       print $client "refused\n";
    }
   #------------------------------- is auto-enrollment enabled?
       } elsif ($userinput =~/^autorun:/) {
    if (isClient) {
       my ($cmd,$cdom) = split(/:/,$userinput);
       my $outcome = &localenroll::run($cdom);
       print $client "$outcome\n";
    } else {
       print $client "0\n";
    }
   #------------------------------- get official sections (for auto-enrollment).
       } elsif ($userinput =~/^autogetsections:/) {
    if (isClient) {
       my ($cmd,$coursecode,$cdom)=split(/:/,$userinput);
       my @secs = &localenroll::get_sections($coursecode,$cdom);
       my $seclist = &escape(join(':',@secs));
       print $client "$seclist\n";
    } else {
       print $client "refused\n";
    }
   #----------------------- validate owner of new course section (for auto-enrollment).
       } elsif ($userinput =~/^autonewcourse:/) {
    if (isClient) {
       my ($cmd,$inst_course_id,$owner,$cdom)=split(/:/,$userinput);
       my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom);
       print $client "$outcome\n";
    } else {
       print $client "refused\n";
    }
   #-------------- validate course section in schedule of classes (for auto-enrollment).
       } elsif ($userinput =~/^autovalidatecourse:/) {
    if (isClient) {
       my ($cmd,$inst_course_id,$cdom)=split(/:/,$userinput);
       my $outcome=&localenroll::validate_courseID($inst_course_id,$cdom);
       print $client "$outcome\n";
    } else {
       print $client "refused\n";
    }
   #--------------------------- create password for new user (for auto-enrollment).
       } elsif ($userinput =~/^autocreatepassword:/) {
    if (isClient) {
       my ($cmd,$authparam,$cdom)=split(/:/,$userinput);
       my ($create_passwd,$authchk);
       ($authparam,$create_passwd,$authchk) = &localenroll::create_password($authparam,$cdom);
       print $client &escape($authparam.':'.$create_passwd.':'.$authchk)."\n";
    } else {
       print $client "refused\n";
    }
   #---------------------------  read and remove temporary files (for auto-enrollment).
       } elsif ($userinput =~/^autoretrieve:/) {
    if (isClient) {
       my ($cmd,$filename) = split(/:/,$userinput);
       my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename;
       if ( (-e $source) && ($filename ne '') ) {
    my $reply = '';
    if (open(my $fh,$source)) {
       while (<$fh>) {
    chomp($_);
    $_ =~ s/^\s+//g;
    $_ =~ s/\s+$//g;
    $reply .= $_;
       }
       close($fh);
       print $client &escape($reply)."\n";
   #                                unlink($source);
    } else {
       print $client "error\n";
    }
       } else {
    print $client "error\n";
       }
    } else {
       print $client "refused\n";
    }
   #---------------------  read and retrieve institutional code format (for support form).
       } elsif ($userinput =~/^autoinstcodeformat:/) {
    if (isClient) {
       my $reply;
       my($cmd,$cdom,$course) = split(/:/,$userinput);
       my @pairs = split/\&/,$course;
       my %instcodes = ();
       my %codes = ();
       my @codetitles = ();
       my %cat_titles = ();
       my %cat_order = ();
       foreach (@pairs) {
    my ($key,$value) = split/=/,$_;
    $instcodes{&unescape($key)} = &unescape($value);
       }
       my $formatreply = &localenroll::instcode_format($cdom,\%instcodes,\%codes,\@codetitles,\%cat_titles,\%cat_order);
       if ($formatreply eq 'ok') {
    my $codes_str = &hash2str(%codes);
    my $codetitles_str = &array2str(@codetitles);
    my $cat_titles_str = &hash2str(%cat_titles);
    my $cat_order_str = &hash2str(%cat_order);
    print $client $codes_str.':'.$codetitles_str.':'.$cat_titles_str.':'.$cat_order_str."\n";
       }
    } else {
       print $client "refused\n";
    }
   # ------------------------------------------------------------- unknown command
   
       } else {
    # unknown command
    print $client "unknown_cmd\n";
       }
   # -------------------------------------------------------------------- complete
       Debug("process_request - returning 1");
       return 1;
   }
   #
   #   Decipher encoded traffic
   #  Parameters:
   #     input      - Encoded data.
   #  Returns:
   #     Decoded data or undef if encryption key was not yet negotiated.
   #  Implicit input:
   #     cipher  - This global holds the negotiated encryption key.
   #
   sub decipher {
       my ($input)  = @_;
       my $output = '';
       
       
       if($cipher) {
    my($enc, $enclength, $encinput) = split(/:/, $input);
    for(my $encidx = 0; $encidx < length($encinput); $encidx += 16) {
       $output .= 
    $cipher->decrypt(pack("H16", substr($encinput, $encidx, 16)));
    }
    return substr($output, 0, $enclength);
       } else {
    return undef;
       }
   }
   
   #
   #   Register a command processor.  This function is invoked to register a sub
   #   to process a request.  Once registered, the ProcessRequest sub can automatically
   #   dispatch requests to an appropriate sub, and do the top level validity checking
   #   as well:
   #    - Is the keyword recognized.
   #    - Is the proper client type attempting the request.
   #    - Is the request encrypted if it has to be.
   #   Parameters:
   #    $request_name         - Name of the request being registered.
   #                           This is the command request that will match
   #                           against the hash keywords to lookup the information
   #                           associated with the dispatch information.
   #    $procedure           - Reference to a sub to call to process the request.
   #                           All subs get called as follows:
   #                             Procedure($cmd, $tail, $replyfd, $key)
   #                             $cmd    - the actual keyword that invoked us.
   #                             $tail   - the tail of the request that invoked us.
   #                             $replyfd- File descriptor connected to the client
   #    $must_encode          - True if the request must be encoded to be good.
   #    $client_ok            - True if it's ok for a client to request this.
   #    $manager_ok           - True if it's ok for a manager to request this.
   # Side effects:
   #      - On success, the Dispatcher hash has an entry added for the key $RequestName
   #      - On failure, the program will die as it's a bad internal bug to try to 
   #        register a duplicate command handler.
   #
   sub register_handler {
       my ($request_name,$procedure,$must_encode, $client_ok,$manager_ok)   = @_;
   
       #  Don't allow duplication#
      
       if (defined $Dispatcher{$request_name}) {
    die "Attempting to define a duplicate request handler for $request_name\n";
       }
       #   Build the client type mask:
       
       my $client_type_mask = 0;
       if($client_ok) {
    $client_type_mask  |= $CLIENT_OK;
       }
       if($manager_ok) {
    $client_type_mask  |= $MANAGER_OK;
       }
      
       #  Enter the hash:
         
       my @entry = ($procedure, $must_encode, $client_type_mask);
      
       $Dispatcher{$request_name} = \@entry;
      
   }
   
   
   #------------------------------------------------------------------
   
   
   
   
 #  #
 #  Convert an error return code from lcpasswd to a string value.  #  Convert an error return code from lcpasswd to a string value.
Line 513  sub catchexception { Line 3165  sub catchexception {
     my ($error)=@_;      my ($error)=@_;
     $SIG{'QUIT'}='DEFAULT';      $SIG{'QUIT'}='DEFAULT';
     $SIG{__DIE__}='DEFAULT';      $SIG{__DIE__}='DEFAULT';
     &logthis("<font color=red>CRITICAL: "      &status("Catching exception");
       &logthis("<font color='red'>CRITICAL: "
      ."ABNORMAL EXIT. Child $$ for server $thisserver died through "       ."ABNORMAL EXIT. Child $$ for server $thisserver died through "
      ."a crash with this error msg->[$error]</font>");       ."a crash with this error msg->[$error]</font>");
     &logthis('Famous last words: '.$status.' - '.$lastlog);      &logthis('Famous last words: '.$status.' - '.$lastlog);
Line 521  sub catchexception { Line 3174  sub catchexception {
     $server->close();      $server->close();
     die($error);      die($error);
 }  }
   
 sub timeout {  sub timeout {
     &logthis("<font color=ref>CRITICAL: TIME OUT ".$$."</font>");      &status("Handling Timeout");
       &logthis("<font color='red'>CRITICAL: TIME OUT ".$$."</font>");
     &catchexception('Timeout');      &catchexception('Timeout');
 }  }
 # -------------------------------- Set signal handlers to record abnormal exits  # -------------------------------- Set signal handlers to record abnormal exits
   
   
 $SIG{'QUIT'}=\&catchexception;  $SIG{'QUIT'}=\&catchexception;
 $SIG{__DIE__}=\&catchexception;  $SIG{__DIE__}=\&catchexception;
   
Line 575  $server = IO::Socket::INET->new(LocalPor Line 3229  $server = IO::Socket::INET->new(LocalPor
 # global variables  # global variables
   
 my %children               = ();       # keys are current child process IDs  my %children               = ();       # keys are current child process IDs
 my $children               = 0;        # current number of children  
   
 sub REAPER {                        # takes care of dead children  sub REAPER {                        # takes care of dead children
     $SIG{CHLD} = \&REAPER;      $SIG{CHLD} = \&REAPER;
     my $pid = wait;      &status("Handling child death");
     if (defined($children{$pid})) {      my $pid;
  &logthis("Child $pid died");      do {
  $children --;   $pid = waitpid(-1,&WNOHANG());
  delete $children{$pid};   if (defined($children{$pid})) {
     } else {      &logthis("Child $pid died");
  &logthis("Unknown Child $pid died");      delete($children{$pid});
    } elsif ($pid > 0) {
       &logthis("Unknown Child $pid died");
    }
       } while ( $pid > 0 );
       foreach my $child (keys(%children)) {
    $pid = waitpid($child,&WNOHANG());
    if ($pid > 0) {
       &logthis("Child $child - $pid looks like we missed it's death");
       delete($children{$pid});
    }
     }      }
       &status("Finished Handling child death");
 }  }
   
 sub HUNTSMAN {                      # signal handler for SIGINT  sub HUNTSMAN {                      # signal handler for SIGINT
       &status("Killing children (INT)");
     local($SIG{CHLD}) = 'IGNORE';   # we're going to kill our children      local($SIG{CHLD}) = 'IGNORE';   # we're going to kill our children
     kill 'INT' => keys %children;      kill 'INT' => keys %children;
     &logthis("Free socket: ".shutdown($server,2)); # free up socket      &logthis("Free socket: ".shutdown($server,2)); # free up socket
     my $execdir=$perlvar{'lonDaemons'};      my $execdir=$perlvar{'lonDaemons'};
     unlink("$execdir/logs/lond.pid");      unlink("$execdir/logs/lond.pid");
     &logthis("<font color=red>CRITICAL: Shutting down</font>");      &logthis("<font color='red'>CRITICAL: Shutting down</font>");
       &status("Done killing children");
     exit;                           # clean up with dignity      exit;                           # clean up with dignity
 }  }
   
 sub HUPSMAN {                      # signal handler for SIGHUP  sub HUPSMAN {                      # signal handler for SIGHUP
     local($SIG{CHLD}) = 'IGNORE';  # we're going to kill our children      local($SIG{CHLD}) = 'IGNORE';  # we're going to kill our children
       &status("Killing children for restart (HUP)");
     kill 'INT' => keys %children;      kill 'INT' => keys %children;
     &logthis("Free socket: ".shutdown($server,2)); # free up socket      &logthis("Free socket: ".shutdown($server,2)); # free up socket
     &logthis("<font color=red>CRITICAL: Restarting</font>");      &logthis("<font color='red'>CRITICAL: Restarting</font>");
     my $execdir=$perlvar{'lonDaemons'};      my $execdir=$perlvar{'lonDaemons'};
     unlink("$execdir/logs/lond.pid");      unlink("$execdir/logs/lond.pid");
       &status("Restarting self (HUP)");
     exec("$execdir/lond");         # here we go again      exec("$execdir/lond");         # here we go again
 }  }
   
 #  #
 #    Kill off hashes that describe the host table prior to re-reading it.  #    Kill off hashes that describe the host table prior to re-reading it.
 #    Hashes affected are:  #    Hashes affected are:
 #       %hostid, %hostdom %hostip  #       %hostid, %hostdom %hostip %hostdns.
 #  #
 sub KillHostHashes {  sub KillHostHashes {
     foreach my $key (keys %hostid) {      foreach my $key (keys %hostid) {
Line 624  sub KillHostHashes { Line 3292  sub KillHostHashes {
     foreach my $key (keys %hostip) {      foreach my $key (keys %hostip) {
  delete $hostip{$key};   delete $hostip{$key};
     }      }
       foreach my $key (keys %hostdns) {
    delete $hostdns{$key};
       }
 }  }
 #  #
 #   Read in the host table from file and distribute it into the various hashes:  #   Read in the host table from file and distribute it into the various hashes:
Line 634  sub KillHostHashes { Line 3305  sub KillHostHashes {
 sub ReadHostTable {  sub ReadHostTable {
   
     open (CONFIG,"$perlvar{'lonTabDir'}/hosts.tab") || die "Can't read host file";      open (CONFIG,"$perlvar{'lonTabDir'}/hosts.tab") || die "Can't read host file";
           my $myloncapaname = $perlvar{'lonHostID'};
       Debug("My loncapa name is : $myloncapaname");
     while (my $configline=<CONFIG>) {      while (my $configline=<CONFIG>) {
  my ($id,$domain,$role,$name,$ip)=split(/:/,$configline);   if (!($configline =~ /^\s*\#/)) {
  chomp($ip); $ip=~s/\D+$//;      my ($id,$domain,$role,$name,$ip)=split(/:/,$configline);
  $hostid{$ip}=$id;      chomp($ip); $ip=~s/\D+$//;
  $hostdom{$id}=$domain;      $hostid{$ip}=$id;         # LonCAPA name of host by IP.
  $hostip{$id}=$ip;      $hostdom{$id}=$domain;    # LonCAPA domain name of host. 
  if ($id eq $perlvar{'lonHostID'}) { $thisserver=$name; }      $hostip{$id}=$ip;      # IP address of host.
       $hostdns{$name} = $id;    # LonCAPA name of host by DNS.
   
       if ($id eq $perlvar{'lonHostID'}) { 
    Debug("Found me in the host table: $name");
    $thisserver=$name; 
       }
    }
     }      }
     close(CONFIG);      close(CONFIG);
 }  }
Line 667  sub ReloadApache { Line 3346  sub ReloadApache {
 #     now be honored.  #     now be honored.
 #  #
 sub UpdateHosts {  sub UpdateHosts {
       &status("Reload hosts.tab");
     logthis('<font color="blue"> Updating connections </font>');      logthis('<font color="blue"> Updating connections </font>');
     #      #
     #  The %children hash has the set of IP's we currently have children      #  The %children hash has the set of IP's we currently have children
Line 691  sub UpdateHosts { Line 3371  sub UpdateHosts {
  }   }
     }      }
     ReloadApache;      ReloadApache;
       &status("Finished reloading hosts.tab");
 }  }
   
   
 sub checkchildren {  sub checkchildren {
       &status("Checking on the children (sending signals)");
     &initnewstatus();      &initnewstatus();
     &logstatus();      &logstatus();
     &logthis('Going to check on the children');      &logthis('Going to check on the children');
     my $docdir=$perlvar{'lonDocRoot'};      my $docdir=$perlvar{'lonDocRoot'};
     foreach (sort keys %children) {      foreach (sort keys %children) {
  sleep 1;   #sleep 1;
         unless (kill 'USR1' => $_) {          unless (kill 'USR1' => $_) {
     &logthis ('Child '.$_.' is dead');      &logthis ('Child '.$_.' is dead');
             &logstatus($$.' is dead');              &logstatus($$.' is dead');
       delete($children{$_});
         }           } 
     }      }
     sleep 5;      sleep 5;
     $SIG{ALRM} = sub { die "timeout" };      $SIG{ALRM} = sub { Debug("timeout"); 
          die "timeout";  };
     $SIG{__DIE__} = 'DEFAULT';      $SIG{__DIE__} = 'DEFAULT';
       &status("Checking on the children (waiting for reports)");
     foreach (sort keys %children) {      foreach (sort keys %children) {
         unless (-e "$docdir/lon-status/londchld/$_.txt") {          unless (-e "$docdir/lon-status/londchld/$_.txt") {
           eval {            eval {
Line 720  sub checkchildren { Line 3405  sub checkchildren {
     #my $result=`echo 'Killed lond process $_.' | mailto $emailto -s '$subj' > /dev/null`;      #my $result=`echo 'Killed lond process $_.' | mailto $emailto -s '$subj' > /dev/null`;
     #$execdir=$perlvar{'lonDaemons'};      #$execdir=$perlvar{'lonDaemons'};
     #$result=`/bin/cp $execdir/logs/lond.log $execdir/logs/lond.log.$_`;      #$result=`/bin/cp $execdir/logs/lond.log $execdir/logs/lond.log.$_`;
       delete($children{$_});
     alarm(0);      alarm(0);
   }    }
         }          }
     }      }
     $SIG{ALRM} = 'DEFAULT';      $SIG{ALRM} = 'DEFAULT';
     $SIG{__DIE__} = \&catchexception;      $SIG{__DIE__} = \&catchexception;
       &status("Finished checking children");
       &logthis('Finished Checking children');
 }  }
   
 # --------------------------------------------------------------------- Logging  # --------------------------------------------------------------------- Logging
Line 757  sub Debug { Line 3445  sub Debug {
 #     request - Original request from client.  #     request - Original request from client.
 #  #
 sub Reply {  sub Reply {
     my $fd      = shift;      my ($fd, $reply, $request) = @_;
     my $reply   = shift;  
     my $request = shift;  
   
     print $fd $reply;      print $fd $reply;
     Debug("Request was $request  Reply was $reply");      Debug("Request was $request  Reply was $reply");
   
       $Transactions++;
   
   
   }
   
   
   #
   #    Sub to report a failure.
   #    This function:
   #     -   Increments the failure statistic counters.
   #     -   Invokes Reply to send the error message to the client.
   # Parameters:
   #    fd       - File descriptor open on the client
   #    reply    - Reply text to emit.
   #    request  - The original request message (used by Reply
   #               to debug if that's enabled.
   # Implicit outputs:
   #    $Failures- The number of failures is incremented.
   #    Reply (invoked here) sends a message to the 
   #    client:
   #
   sub Failure {
       my $fd      = shift;
       my $reply   = shift;
       my $request = shift;
      
       $Failures++;
       Reply($fd, $reply, $request);      # That's simple eh?
 }  }
 # ------------------------------------------------------------------ Log status  # ------------------------------------------------------------------ Log status
   
 sub logstatus {  sub logstatus {
       &status("Doing logging");
     my $docdir=$perlvar{'lonDocRoot'};      my $docdir=$perlvar{'lonDocRoot'};
     {      {
     my $fh=IO::File->new(">>$docdir/lon-status/londstatus.txt");  
     print $fh $$."\t".$currenthostid."\t".$status."\t".$lastlog."\n";  
     $fh->close();  
     }  
     {  
  my $fh=IO::File->new(">$docdir/lon-status/londchld/$$.txt");   my $fh=IO::File->new(">$docdir/lon-status/londchld/$$.txt");
         print $fh $status."\n".$lastlog."\n".time;          print $fh $status."\n".$lastlog."\n".time."\n$keymode";
         $fh->close();          $fh->close();
     }      }
       &status("Finished $$.txt");
       {
    open(LOG,">>$docdir/lon-status/londstatus.txt");
    flock(LOG,LOCK_EX);
    print LOG $$."\t".$clientname."\t".$currenthostid."\t"
       .$status."\t".$lastlog."\t $keymode\n";
    flock(DB,LOCK_UN);
    close(LOG);
       }
       &status("Finished logging");
 }  }
   
 sub initnewstatus {  sub initnewstatus {
Line 834  sub reconlonc { Line 3553  sub reconlonc {
             kill USR1 => $loncpid;              kill USR1 => $loncpid;
         } else {          } else {
     &logthis(      &logthis(
               "<font color=red>CRITICAL: "                "<font color='red'>CRITICAL: "
              ."lonc at pid $loncpid not responding, giving up</font>");               ."lonc at pid $loncpid not responding, giving up</font>");
         }          }
     } else {      } else {
       &logthis('<font color=red>CRITICAL: lonc not running, giving up</font>');        &logthis('<font color="red">CRITICAL: lonc not running, giving up</font>');
     }      }
 }  }
   
Line 942  my $execdir=$perlvar{'lonDaemons'}; Line 3661  my $execdir=$perlvar{'lonDaemons'};
 open (PIDSAVE,">$execdir/logs/lond.pid");  open (PIDSAVE,">$execdir/logs/lond.pid");
 print PIDSAVE "$$\n";  print PIDSAVE "$$\n";
 close(PIDSAVE);  close(PIDSAVE);
 &logthis("<font color=red>CRITICAL: ---------- Starting ----------</font>");  &logthis("<font color='red'>CRITICAL: ---------- Starting ----------</font>");
 &status('Starting');  &status('Starting');
   
   
Line 966  ReadHostTable; Line 3685  ReadHostTable;
 #   along the connection.  #   along the connection.
   
 while (1) {  while (1) {
       &status('Starting accept');
     $client = $server->accept() or next;      $client = $server->accept() or next;
       &status('Accepted '.$client.' off to spawn');
     make_new_child($client);      make_new_child($client);
       &status('Finished spawning');
 }  }
   
 sub make_new_child {  sub make_new_child {
     my $pid;      my $pid;
     my $cipher;  #    my $cipher;     # Now global
     my $sigset;      my $sigset;
   
     $client = shift;      $client = shift;
       &status('Starting new child '.$client);
     &logthis('<font color="green"> Attempting to start child ('.$client.      &logthis('<font color="green"> Attempting to start child ('.$client.
      ")</font>");           ")</font>");    
     # block signal for fork      # block signal for fork
Line 993  sub make_new_child { Line 3716  sub make_new_child {
     #  the pid hash.      #  the pid hash.
     #      #
     my $caller = getpeername($client);      my $caller = getpeername($client);
     my ($port,$iaddr)=unpack_sockaddr_in($caller);      my ($port,$iaddr);
     $clientip=inet_ntoa($iaddr);      if (defined($caller) && length($caller) > 0) {
    ($port,$iaddr)=unpack_sockaddr_in($caller);
       } else {
    &logthis("Unable to determine who caller was, getpeername returned nothing");
       }
       if (defined($iaddr)) {
    $clientip  = inet_ntoa($iaddr);
    Debug("Connected with $clientip");
    $clientdns = gethostbyaddr($iaddr, AF_INET);
    Debug("Connected with $clientdns by name");
       } else {
    &logthis("Unable to determine clientip");
    $clientip='Unavailable';
       }
           
     if ($pid) {      if ($pid) {
         # Parent records the child's birth and returns.          # Parent records the child's birth and returns.
         sigprocmask(SIG_UNBLOCK, $sigset)          sigprocmask(SIG_UNBLOCK, $sigset)
             or die "Can't unblock SIGINT for fork: $!\n";              or die "Can't unblock SIGINT for fork: $!\n";
         $children{$pid} = $clientip;          $children{$pid} = $clientip;
         $children++;  
         &status('Started child '.$pid);          &status('Started child '.$pid);
         return;          return;
     } else {      } else {
Line 1018  sub make_new_child { Line 3753  sub make_new_child {
         sigprocmask(SIG_UNBLOCK, $sigset)          sigprocmask(SIG_UNBLOCK, $sigset)
             or die "Can't unblock SIGINT for fork: $!\n";              or die "Can't unblock SIGINT for fork: $!\n";
   
         my $tmpsnum=0;  #        my $tmpsnum=0;            # Now global
 #---------------------------------------------------- kerberos 5 initialization  #---------------------------------------------------- kerberos 5 initialization
         &Authen::Krb5::init_context();          &Authen::Krb5::init_context();
         &Authen::Krb5::init_ets();          &Authen::Krb5::init_ets();
Line 1027  sub make_new_child { Line 3762  sub make_new_child {
 # =============================================================================  # =============================================================================
             # do something with the connection              # do something with the connection
 # -----------------------------------------------------------------------------  # -----------------------------------------------------------------------------
  # see if we know client and check for spoof IP by challenge   # see if we know client and 'check' for spoof IP by ineffective challenge
   
  ReadManagerTable; # May also be a manager!!   ReadManagerTable; # May also be a manager!!
   
Line 1045  sub make_new_child { Line 3780  sub make_new_child {
     $clientname = $managers{$clientip};      $clientname = $managers{$clientip};
  }   }
  my $clientok;   my $clientok;
   
  if ($clientrec || $ismanager) {   if ($clientrec || $ismanager) {
     &status("Waiting for init from $clientip $clientname");      &status("Waiting for init from $clientip $clientname");
     &logthis('<font color="yellow">INFO: Connection, '.      &logthis('<font color="yellow">INFO: Connection, '.
Line 1052  sub make_new_child { Line 3788  sub make_new_child {
   " ($clientname) connection type = $ConnectionType </font>" );    " ($clientname) connection type = $ConnectionType </font>" );
     &status("Connecting $clientip  ($clientname))");       &status("Connecting $clientip  ($clientname))"); 
     my $remotereq=<$client>;      my $remotereq=<$client>;
     $remotereq=~s/[^\w:]//g;      chomp($remotereq);
       Debug("Got init: $remotereq");
       my $inikeyword = split(/:/, $remotereq);
     if ($remotereq =~ /^init/) {      if ($remotereq =~ /^init/) {
  &sethost("sethost:$perlvar{'lonHostID'}");   &sethost("sethost:$perlvar{'lonHostID'}");
  my $challenge="$$".time;   #
  print $client "$challenge\n";   #  If the remote is attempting a local init... give that a try:
  &status(   #
  "Waiting for challenge reply from $clientip ($clientname)");    my ($i, $inittype) = split(/:/, $remotereq);
  $remotereq=<$client>;  
  $remotereq=~s/\W//g;   # If the connection type is ssl, but I didn't get my
  if ($challenge eq $remotereq) {   # certificate files yet, then I'll drop  back to 
     $clientok=1;   # insecure (if allowed).
     print $client "ok\n";  
    if($inittype eq "ssl") {
       my ($ca, $cert) = lonssl::CertificateFile;
       my $kfile       = lonssl::KeyFile;
       if((!$ca)   || 
          (!$cert) || 
          (!$kfile)) {
    $inittype = ""; # This forces insecure attempt.
    &logthis("<font color=\"blue\"> Certificates not "
    ."installed -- trying insecure auth</font>");
       } else { # SSL certificates are in place so
       } # Leave the inittype alone.
    }
   
    if($inittype eq "local") {
       my $key = LocalConnection($client, $remotereq);
       if($key) {
    Debug("Got local key $key");
    $clientok     = 1;
    my $cipherkey = pack("H32", $key);
    $cipher       = new IDEA($cipherkey);
    print $client "ok:local\n";
    &logthis('<font color="green"'
    . "Successful local authentication </font>");
    $keymode = "local"
       } else {
    Debug("Failed to get local key");
    $clientok = 0;
    shutdown($client, 3);
    close $client;
       }
    } elsif ($inittype eq "ssl") {
       my $key = SSLConnection($client);
       if ($key) {
    $clientok = 1;
    my $cipherkey = pack("H32", $key);
    $cipher       = new IDEA($cipherkey);
    &logthis('<font color="green">'
    ."Successfull ssl authentication with $clientname </font>");
    $keymode = "ssl";
        
       } else {
    $clientok = 0;
    close $client;
       }
      
  } else {   } else {
     &logthis(      my $ok = InsecureConnection($client);
      "<font color=blue>WARNING: $clientip did not reply challenge</font>");      if($ok) {
     &status('No challenge reply '.$clientip);   $clientok = 1;
    &logthis('<font color="green">'
    ."Successful insecure authentication with $clientname </font>");
    print $client "ok\n";
    $keymode = "insecure";
       } else {
    &logthis('<font color="yellow">'
     ."Attempted insecure connection disallowed </font>");
    close $client;
    $clientok = 0;
   
       }
  }   }
     } else {      } else {
  &logthis(   &logthis(
  "<font color=blue>WARNING: "   "<font color='blue'>WARNING: "
  ."$clientip failed to initialize: >$remotereq< </font>");   ."$clientip failed to initialize: >$remotereq< </font>");
  &status('No init '.$clientip);   &status('No init '.$clientip);
     }      }
       
  } else {   } else {
     &logthis(      &logthis(
      "<font color=blue>WARNING: Unknown client $clientip</font>");       "<font color='blue'>WARNING: Unknown client $clientip</font>");
     &status('Hung up on '.$clientip);      &status('Hung up on '.$clientip);
  }   }
    
  if ($clientok) {   if ($clientok) {
 # ---------------- New known client connecting, could mean machine online again  # ---------------- New known client connecting, could mean machine online again
           
Line 1091  sub make_new_child { Line 3887  sub make_new_child {
  }   }
  &reconlonc("$perlvar{'lonSockDir'}/$id");   &reconlonc("$perlvar{'lonSockDir'}/$id");
     }      }
     &logthis("<font color=green>Established connection: $clientname</font>");      &logthis("<font color='green'>Established connection: $clientname</font>");
     &status('Will listen to '.$clientname);      &status('Will listen to '.$clientname);
 # ------------------------------------------------------------ Process requests  # ------------------------------------------------------------ Process requests
     while (my $userinput=<$client>) {      my $keep_going = 1;
                 chomp($userinput);      my $user_input;
  Debug("Request = $userinput\n");      while(($user_input = get_request) && $keep_going) {
                 &status('Processing '.$clientname.': '.$userinput);   alarm(120);
                 my $wasenc=0;   Debug("Main: Got $user_input\n");
                 alarm(120);   $keep_going = &process_request($user_input);
 # ------------------------------------------------------------ See if encrypted  
  if ($userinput =~ /^enc/) {  
     if ($cipher) {  
  my ($cmd,$cmdlength,$encinput)=split(/:/,$userinput);  
  $userinput='';  
  for (my $encidx=0;$encidx<length($encinput);$encidx+=16) {  
     $userinput.=  
  $cipher->decrypt(  
  pack("H16",substr($encinput,$encidx,16))  
  );  
  }  
  $userinput=substr($userinput,0,$cmdlength);  
  $wasenc=1;  
     }  
  }  
   
 # ------------------------------------------------------------- Normal commands  
 # ------------------------------------------------------------------------ ping  
  if ($userinput =~ /^ping/) { # client only  
     if(isClient) {  
  print $client "$currenthostid\n";  
     } else {  
  Reply($client, "refused\n", $userinput);  
     }  
 # ------------------------------------------------------------------------ pong  
  }elsif ($userinput =~ /^pong/) { # client only  
     if(isClient) {  
  my $reply=&reply("ping",$clientname);  
  print $client "$currenthostid:$reply\n";   
     } else {  
  Reply($client, "refused\n", $userinput);  
     }  
 # ------------------------------------------------------------------------ ekey  
  } elsif ($userinput =~ /^ekey/) { # ok for both clients & mgrs  
     my $buildkey=time.$$.int(rand 100000);  
     $buildkey=~tr/1-6/A-F/;  
     $buildkey=int(rand 100000).$buildkey.int(rand 100000);  
     my $key=$currenthostid.$clientname;  
     $key=~tr/a-z/A-Z/;  
     $key=~tr/G-P/0-9/;  
     $key=~tr/Q-Z/0-9/;  
     $key=$key.$buildkey.$key.$buildkey.$key.$buildkey;  
     $key=substr($key,0,32);  
     my $cipherkey=pack("H32",$key);  
     $cipher=new IDEA $cipherkey;  
     print $client "$buildkey\n";   
 # ------------------------------------------------------------------------ load  
  } elsif ($userinput =~ /^load/) { # client only  
     if (isClient) {  
  my $loadavg;  
  {  
     my $loadfile=IO::File->new('/proc/loadavg');  
     $loadavg=<$loadfile>;  
  }  
  $loadavg =~ s/\s.*//g;  
  my $loadpercent=100*$loadavg/$perlvar{'lonLoadLim'};  
  print $client "$loadpercent\n";  
     } else {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # -------------------------------------------------------------------- userload  
  } elsif ($userinput =~ /^userload/) { # client only  
     if(isClient) {  
  my $userloadpercent=&userload();  
  print $client "$userloadpercent\n";  
     } else {  
  Reply($client, "refused\n", $userinput);  
        
     }  
 #  
 #        Transactions requiring encryption:  
 #  
 # ----------------------------------------------------------------- currentauth  
  } elsif ($userinput =~ /^currentauth/) {  
     if (($wasenc==1)  && isClient) { # Encoded & client only.  
  my ($cmd,$udom,$uname)=split(/:/,$userinput);  
  my $result = GetAuthType($udom, $uname);  
  if($result eq "nouser") {  
     print $client "unknown_user\n";  
  }  
  else {  
     print $client "$result\n"  
     }  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 #--------------------------------------------------------------------- pushfile  
  } elsif($userinput =~ /^pushfile/) { # encoded & manager.  
     if(($wasenc == 1) && isManager) {  
  my $cert = GetCertificate($userinput);  
  if(ValidManager($cert)) {  
     my $reply = PushFile($userinput);  
     print $client "$reply\n";  
  } else {  
     print $client "refused\n";  
  }   
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 #--------------------------------------------------------------------- reinit  
  } elsif($userinput =~ /^reinit/) { # Encoded and manager  
     if (($wasenc == 1) && isManager) {  
  my $cert = GetCertificate($userinput);  
  if(ValidManager($cert)) {  
     chomp($userinput);  
     my $reply = ReinitProcess($userinput);  
     print $client  "$reply\n";  
  } else {  
     print $client "refused\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
   
     }  
 # ------------------------------------------------------------------------ auth  
  } elsif ($userinput =~ /^auth/) { # Encoded and client only.  
     if (($wasenc==1) && isClient) {  
  my ($cmd,$udom,$uname,$upass)=split(/:/,$userinput);  
  chomp($upass);  
  $upass=unescape($upass);  
  my $proname=propath($udom,$uname);  
  my $passfilename="$proname/passwd";  
  if (-e $passfilename) {  
     my $pf = IO::File->new($passfilename);  
     my $realpasswd=<$pf>;  
     chomp($realpasswd);  
     my ($howpwd,$contentpwd)=split(/:/,$realpasswd);  
     my $pwdcorrect=0;  
     if ($howpwd eq 'internal') {  
  &Debug("Internal auth");  
  $pwdcorrect=  
     (crypt($upass,$contentpwd) eq $contentpwd);  
     } elsif ($howpwd eq 'unix') {  
  &Debug("Unix auth");  
  if((getpwnam($uname))[1] eq "") { #no such user!  
     $pwdcorrect = 0;  
  } else {  
     $contentpwd=(getpwnam($uname))[1];  
     my $pwauth_path="/usr/local/sbin/pwauth";  
     unless ($contentpwd eq 'x') {  
  $pwdcorrect=  
     (crypt($upass,$contentpwd) eq   
      $contentpwd);  
     }  
       
     elsif (-e $pwauth_path) {  
  open PWAUTH, "|$pwauth_path" or  
     die "Cannot invoke authentication";  
  print PWAUTH "$uname\n$upass\n";  
  close PWAUTH;  
  $pwdcorrect=!$?;  
     }  
  }  
     } elsif ($howpwd eq 'krb4') {  
  my $null=pack("C",0);  
  unless ($upass=~/$null/) {  
     my $krb4_error = &Authen::Krb4::get_pw_in_tkt  
  ($uname,"",$contentpwd,'krbtgt',  
  $contentpwd,1,$upass);  
     if (!$krb4_error) {  
  $pwdcorrect = 1;  
     } else {   
  $pwdcorrect=0;   
  # log error if it is not a bad password  
  if ($krb4_error != 62) {  
     &logthis('krb4:'.$uname.','.$contentpwd.','.  
      &Authen::Krb4::get_err_txt($Authen::Krb4::error));  
  }  
     }  
  }  
     } elsif ($howpwd eq 'krb5') {  
  my $null=pack("C",0);  
  unless ($upass=~/$null/) {  
     my $krbclient=&Authen::Krb5::parse_name($uname.'@'.$contentpwd);  
     my $krbservice="krbtgt/".$contentpwd."\@".$contentpwd;  
     my $krbserver=&Authen::Krb5::parse_name($krbservice);  
     my $credentials=&Authen::Krb5::cc_default();  
     $credentials->initialize($krbclient);  
     my $krbreturn =   
  &Authen::Krb5::get_in_tkt_with_password(  
  $krbclient,$krbserver,$upass,$credentials);  
 #  unless ($krbreturn) {  
 #      &logthis("Krb5 Error: ".  
 #       &Authen::Krb5::error());  
 #  }  
     $pwdcorrect = ($krbreturn == 1);  
  } else { $pwdcorrect=0; }  
     } elsif ($howpwd eq 'localauth') {  
  $pwdcorrect=&localauth::localauth($uname,$upass,  
   $contentpwd);  
     }  
     if ($pwdcorrect) {  
  print $client "authorized\n";  
     } else {  
  print $client "non_authorized\n";  
     }    
  } else {  
     print $client "unknown_user\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # ---------------------------------------------------------------------- passwd  
  } elsif ($userinput =~ /^passwd/) { # encoded and client  
     if (($wasenc==1) && isClient) {  
  my   
     ($cmd,$udom,$uname,$upass,$npass)=split(/:/,$userinput);  
  chomp($npass);  
  $upass=&unescape($upass);  
  $npass=&unescape($npass);  
  &Debug("Trying to change password for $uname");  
  my $proname=propath($udom,$uname);  
  my $passfilename="$proname/passwd";  
  if (-e $passfilename) {  
     my $realpasswd;  
     { my $pf = IO::File->new($passfilename);  
       $realpasswd=<$pf>; }  
     chomp($realpasswd);  
     my ($howpwd,$contentpwd)=split(/:/,$realpasswd);  
     if ($howpwd eq 'internal') {  
  &Debug("internal auth");  
  if (crypt($upass,$contentpwd) eq $contentpwd) {  
     my $salt=time;  
     $salt=substr($salt,6,2);  
     my $ncpass=crypt($npass,$salt);  
     {  
  my $pf;  
  if ($pf = IO::File->new(">$passfilename")) {  
     print $pf "internal:$ncpass\n";  
     &logthis("Result of password change for $uname: pwchange_success");  
     print $client "ok\n";  
  } else {  
     &logthis("Unable to open $uname passwd to change password");  
     print $client "non_authorized\n";  
  }  
     }               
       
  } else {  
     print $client "non_authorized\n";  
  }  
     } elsif ($howpwd eq 'unix') {  
  # Unix means we have to access /etc/password  
  # one way or another.  
  # First: Make sure the current password is  
  #        correct  
  &Debug("auth is unix");  
  $contentpwd=(getpwnam($uname))[1];  
  my $pwdcorrect = "0";  
  my $pwauth_path="/usr/local/sbin/pwauth";  
  unless ($contentpwd eq 'x') {  
     $pwdcorrect=  
  (crypt($upass,$contentpwd) eq $contentpwd);  
  } elsif (-e $pwauth_path) {  
     open PWAUTH, "|$pwauth_path" or  
  die "Cannot invoke authentication";  
     print PWAUTH "$uname\n$upass\n";  
     close PWAUTH;  
     &Debug("exited pwauth with $? ($uname,$upass) ");  
     $pwdcorrect=($? == 0);  
  }  
  if ($pwdcorrect) {  
     my $execdir=$perlvar{'lonDaemons'};  
     &Debug("Opening lcpasswd pipeline");  
     my $pf = IO::File->new("|$execdir/lcpasswd > $perlvar{'lonDaemons'}/logs/lcpasswd.log");  
     print $pf "$uname\n$npass\n$npass\n";  
     close $pf;  
     my $err = $?;  
     my $result = ($err>0 ? 'pwchange_failure'   
   : 'ok');  
     &logthis("Result of password change for $uname: ".  
      &lcpasswdstrerror($?));  
     print $client "$result\n";  
  } else {  
     print $client "non_authorized\n";  
  }  
     } else {  
  print $client "auth_mode_error\n";  
     }    
  } else {  
     print $client "unknown_user\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # -------------------------------------------------------------------- makeuser  
  } elsif ($userinput =~ /^makeuser/) { # encoded and client.  
     &Debug("Make user received");  
     my $oldumask=umask(0077);  
     if (($wasenc==1) && isClient) {  
  my   
     ($cmd,$udom,$uname,$umode,$npass)=split(/:/,$userinput);  
  &Debug("cmd =".$cmd." $udom =".$udom.  
        " uname=".$uname);  
  chomp($npass);  
  $npass=&unescape($npass);  
  my $proname=propath($udom,$uname);  
  my $passfilename="$proname/passwd";  
  &Debug("Password file created will be:".  
        $passfilename);  
  if (-e $passfilename) {  
     print $client "already_exists\n";  
  } elsif ($udom ne $currentdomainid) {  
     print $client "not_right_domain\n";  
  } else {  
     my @fpparts=split(/\//,$proname);  
     my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2];  
     my $fperror='';  
     for (my $i=3;$i<=$#fpparts;$i++) {  
  $fpnow.='/'.$fpparts[$i];   
  unless (-e $fpnow) {  
     unless (mkdir($fpnow,0777)) {  
  $fperror="error: ".($!+0)  
     ." mkdir failed while attempting "  
     ."makeuser\n";  
     }  
  }  
     }  
     unless ($fperror) {  
  my $result=&make_passwd_file($uname, $umode,$npass,  
      $passfilename);  
  print $client $result;  
     } else {  
  print $client "$fperror\n";  
     }  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
         
     }  
     umask($oldumask);  
 # -------------------------------------------------------------- changeuserauth  
  } elsif ($userinput =~ /^changeuserauth/) { # encoded & client  
     &Debug("Changing authorization");  
     if (($wasenc==1) && isClient) {  
  my   
     ($cmd,$udom,$uname,$umode,$npass)=split(/:/,$userinput);  
  chomp($npass);  
  &Debug("cmd = ".$cmd." domain= ".$udom.  
        "uname =".$uname." umode= ".$umode);  
  $npass=&unescape($npass);  
  my $proname=&propath($udom,$uname);  
  my $passfilename="$proname/passwd";  
  if ($udom ne $currentdomainid) {  
     print $client "not_right_domain\n";  
  } else {  
     my $result=&make_passwd_file($uname, $umode,$npass,  
  $passfilename);  
     print $client $result;  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
      
     }  
 # ------------------------------------------------------------------------ home  
  } elsif ($userinput =~ /^home/) { # client clear or encoded  
     if(isClient) {  
  my ($cmd,$udom,$uname)=split(/:/,$userinput);  
  chomp($uname);  
  my $proname=propath($udom,$uname);  
  if (-e $proname) {  
     print $client "found\n";  
  } else {  
     print $client "not_found\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # ---------------------------------------------------------------------- update  
  } elsif ($userinput =~ /^update/) { # client clear or encoded.  
     if(isClient) {  
  my ($cmd,$fname)=split(/:/,$userinput);  
  my $ownership=ishome($fname);  
  if ($ownership eq 'not_owner') {  
     if (-e $fname) {  
  my ($dev,$ino,$mode,$nlink,  
     $uid,$gid,$rdev,$size,  
     $atime,$mtime,$ctime,  
     $blksize,$blocks)=stat($fname);  
  my $now=time;  
  my $since=$now-$atime;  
  if ($since>$perlvar{'lonExpire'}) {  
     my $reply=  
  &reply("unsub:$fname","$clientname");  
     unlink("$fname");  
  } else {  
     my $transname="$fname.in.transfer";  
     my $remoteurl=  
  &reply("sub:$fname","$clientname");  
     my $response;  
     {  
  my $ua=new LWP::UserAgent;  
  my $request=new HTTP::Request('GET',"$remoteurl");  
  $response=$ua->request($request,$transname);  
     }  
     if ($response->is_error()) {  
  unlink($transname);  
  my $message=$response->status_line;  
  &logthis(  
  "LWP GET: $message for $fname ($remoteurl)");  
     } else {  
  if ($remoteurl!~/\.meta$/) {  
     my $ua=new LWP::UserAgent;  
     my $mrequest=  
  new HTTP::Request('GET',$remoteurl.'.meta');  
     my $mresponse=  
  $ua->request($mrequest,$fname.'.meta');  
     if ($mresponse->is_error()) {  
  unlink($fname.'.meta');  
     }  
  }  
  rename($transname,$fname);  
     }  
  }  
  print $client "ok\n";  
     } else {  
  print $client "not_found\n";  
     }  
  } else {  
     print $client "rejected\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # -------------------------------------- fetch a user file from a remote server  
  } elsif ($userinput =~ /^fetchuserfile/) { # Client clear or enc.  
     if(isClient) {  
  my ($cmd,$fname)=split(/:/,$userinput);  
  my ($udom,$uname,$ufile)=split(/\//,$fname);  
  my $udir=propath($udom,$uname).'/userfiles';  
  unless (-e $udir) { mkdir($udir,0770); }  
  if (-e $udir) {  
     $ufile=~s/^[\.\~]+//;  
     $ufile=~s/\///g;  
     my $destname=$udir.'/'.$ufile;  
     my $transname=$udir.'/'.$ufile.'.in.transit';  
     my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;  
     my $response;  
     {  
  my $ua=new LWP::UserAgent;  
  my $request=new HTTP::Request('GET',"$remoteurl");  
  $response=$ua->request($request,$transname);  
     }  
     if ($response->is_error()) {  
  unlink($transname);  
  my $message=$response->status_line;  
  &logthis("LWP GET: $message for $fname ($remoteurl)");  
  print $client "failed\n";  
     } else {  
  if (!rename($transname,$destname)) {  
     &logthis("Unable to move $transname to $destname");  
     unlink($transname);  
     print $client "failed\n";  
  } else {  
     print $client "ok\n";  
  }  
     }  
  } else {  
     print $client "not_home\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # ------------------------------------------ authenticate access to a user file  
  } elsif ($userinput =~ /^tokenauthuserfile/) { # Client only  
     if(isClient) {  
  my ($cmd,$fname,$session)=split(/:/,$userinput);  
  chomp($session);  
  my $reply='non_auth';  
  if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'.  
  $session.'.id')) {  
     while (my $line=<ENVIN>) {  
  if ($line=~/userfile\.$fname\=/) { $reply='ok'; }  
     }  
     close(ENVIN);  
     print $client $reply."\n";  
  } else {  
     print $client "invalid_token\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # ----------------------------------------------------------------- unsubscribe  
  } elsif ($userinput =~ /^unsub/) {  
     if(isClient) {  
  my ($cmd,$fname)=split(/:/,$userinput);  
  if (-e $fname) {  
     print $client &unsub($client,$fname,$clientip);  
  } else {  
     print $client "not_found\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # ------------------------------------------------------------------- subscribe  
  } elsif ($userinput =~ /^sub/) {  
     if(isClient) {  
  print $client &subscribe($userinput,$clientip);  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # ------------------------------------------------------------- current version  
  } elsif ($userinput =~ /^currentversion/) {  
     if(isClient) {  
  my ($cmd,$fname)=split(/:/,$userinput);  
  print $client &currentversion($fname)."\n";  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # ------------------------------------------------------------------------- log  
  } elsif ($userinput =~ /^log/) {  
     if(isClient) {  
  my ($cmd,$udom,$uname,$what)=split(/:/,$userinput);  
  chomp($what);  
  my $proname=propath($udom,$uname);  
  my $now=time;  
  {  
     my $hfh;  
     if ($hfh=IO::File->new(">>$proname/activity.log")) {   
  print $hfh "$now:$clientname:$what\n";  
  print $client "ok\n";   
     } else {  
  print $client "error: ".($!+0)  
     ." IO::File->new Failed "  
     ."while attempting log\n";  
     }  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # ------------------------------------------------------------------------- put  
  } elsif ($userinput =~ /^put/) {  
     if(isClient) {  
  my ($cmd,$udom,$uname,$namespace,$what)  
     =split(/:/,$userinput);  
  $namespace=~s/\//\_/g;  
  $namespace=~s/\W//g;  
  if ($namespace ne 'roles') {  
     chomp($what);  
     my $proname=propath($udom,$uname);  
     my $now=time;  
     unless ($namespace=~/^nohist\_/) {  
  my $hfh;  
  if (  
     $hfh=IO::File->new(">>$proname/$namespace.hist")  
     ) { print $hfh "P:$now:$what\n"; }  
     }  
     my @pairs=split(/\&/,$what);  
     my %hash;  
     if (tie(%hash,'GDBM_File',  
     "$proname/$namespace.db",  
     &GDBM_WRCREAT(),0640)) {  
  foreach my $pair (@pairs) {  
     my ($key,$value)=split(/=/,$pair);  
     $hash{$key}=$value;  
  }  
  if (untie(%hash)) {  
     print $client "ok\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) failed ".  
  "while attempting put\n";  
  }  
     } else {  
  print $client "error: ".($!)  
     ." tie(GDBM) Failed ".  
     "while attempting put\n";  
     }  
  } else {  
     print $client "refused\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # ------------------------------------------------------------------- inc  
  } elsif ($userinput =~ /^inc:/) {  
     if(isClient) {  
  my ($cmd,$udom,$uname,$namespace,$what)  
     =split(/:/,$userinput);  
  $namespace=~s/\//\_/g;  
  $namespace=~s/\W//g;  
  if ($namespace ne 'roles') {  
     chomp($what);  
     my $proname=propath($udom,$uname);  
     my $now=time;  
     unless ($namespace=~/^nohist\_/) {  
  my $hfh;  
  if (  
     $hfh=IO::File->new(">>$proname/$namespace.hist")  
     ) { print $hfh "P:$now:$what\n"; }  
     }  
     my @pairs=split(/\&/,$what);  
     my %hash;  
     if (tie(%hash,'GDBM_File',  
     "$proname/$namespace.db",  
     &GDBM_WRCREAT(),0640)) {  
  foreach my $pair (@pairs) {  
     my ($key,$value)=split(/=/,$pair);  
                                     # We could check that we have a number...  
                                     if (! defined($value) || $value eq '') {  
                                         $value = 1;  
                                     }  
     $hash{$key}+=$value;  
  }  
  if (untie(%hash)) {  
     print $client "ok\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) failed ".  
  "while attempting put\n";  
  }  
     } else {  
  print $client "error: ".($!)  
     ." tie(GDBM) Failed ".  
     "while attempting put\n";  
     }  
  } else {  
     print $client "refused\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # -------------------------------------------------------------------- rolesput  
  } elsif ($userinput =~ /^rolesput/) {  
     if(isClient) {  
  &Debug("rolesput");  
  if ($wasenc==1) {  
     my ($cmd,$exedom,$exeuser,$udom,$uname,$what)  
  =split(/:/,$userinput);  
     &Debug("cmd = ".$cmd." exedom= ".$exedom.  
    "user = ".$exeuser." udom=".$udom.  
    "what = ".$what);  
     my $namespace='roles';  
     chomp($what);  
     my $proname=propath($udom,$uname);  
     my $now=time;  
     {  
  my $hfh;  
  if (  
     $hfh=IO::File->new(">>$proname/$namespace.hist")  
     ) {   
     print $hfh "P:$now:$exedom:$exeuser:$what\n";  
  }  
     }  
     my @pairs=split(/\&/,$what);  
     my %hash;  
     if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  
  foreach my $pair (@pairs) {  
     my ($key,$value)=split(/=/,$pair);  
     &ManagePermissions($key, $udom, $uname,  
        &GetAuthType( $udom,   
      $uname));  
     $hash{$key}=$value;  
  }  
  if (untie(%hash)) {  
     print $client "ok\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting rolesput\n";  
  }  
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting rolesput\n";  
     }  
  } else {  
     print $client "refused\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
     
     }  
 # -------------------------------------------------------------------- rolesdel  
  } elsif ($userinput =~ /^rolesdel/) {  
     if(isClient) {  
  &Debug("rolesdel");  
  if ($wasenc==1) {  
     my ($cmd,$exedom,$exeuser,$udom,$uname,$what)  
  =split(/:/,$userinput);  
     &Debug("cmd = ".$cmd." exedom= ".$exedom.  
    "user = ".$exeuser." udom=".$udom.  
    "what = ".$what);  
     my $namespace='roles';  
     chomp($what);  
     my $proname=propath($udom,$uname);  
     my $now=time;  
     {  
  my $hfh;  
  if (  
     $hfh=IO::File->new(">>$proname/$namespace.hist")  
     ) {   
     print $hfh "D:$now:$exedom:$exeuser:$what\n";  
  }  
     }  
     my @rolekeys=split(/\&/,$what);  
     my %hash;  
     if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  
  foreach my $key (@rolekeys) {  
     delete $hash{$key};  
  }  
  if (untie(%hash)) {  
     print $client "ok\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting rolesdel\n";  
  }  
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting rolesdel\n";  
     }  
  } else {  
     print $client "refused\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
         
     }  
 # ------------------------------------------------------------------------- get  
  } elsif ($userinput =~ /^get/) {  
     if(isClient) {  
  my ($cmd,$udom,$uname,$namespace,$what)  
     =split(/:/,$userinput);  
  $namespace=~s/\//\_/g;  
  $namespace=~s/\W//g;  
  chomp($what);  
  my @queries=split(/\&/,$what);  
  my $proname=propath($udom,$uname);  
  my $qresult='';  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
     for (my $i=0;$i<=$#queries;$i++) {  
  $qresult.="$hash{$queries[$i]}&";  
     }  
     if (untie(%hash)) {  
  $qresult=~s/\&$//;  
  print $client "$qresult\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting get\n";  
     }  
  } else {  
     if ($!+0 == 2) {  
  print $client "error:No such file or ".  
     "GDBM reported bad block error\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting get\n";  
     }  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # ------------------------------------------------------------------------ eget  
  } elsif ($userinput =~ /^eget/) {  
     if (isClient) {  
  my ($cmd,$udom,$uname,$namespace,$what)  
     =split(/:/,$userinput);  
  $namespace=~s/\//\_/g;  
  $namespace=~s/\W//g;  
  chomp($what);  
  my @queries=split(/\&/,$what);  
  my $proname=propath($udom,$uname);  
  my $qresult='';  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
     for (my $i=0;$i<=$#queries;$i++) {  
  $qresult.="$hash{$queries[$i]}&";  
     }  
     if (untie(%hash)) {  
  $qresult=~s/\&$//;  
  if ($cipher) {  
     my $cmdlength=length($qresult);  
     $qresult.="         ";  
     my $encqresult='';  
     for   
  (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {  
     $encqresult.=  
  unpack("H16",  
        $cipher->encrypt(substr($qresult,$encidx,8)));  
  }  
     print $client "enc:$cmdlength:$encqresult\n";  
  } else {  
     print $client "error:no_key\n";  
  }  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting eget\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting eget\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
       
     }  
 # ------------------------------------------------------------------------- del  
  } elsif ($userinput =~ /^del/) {  
     if(isClient) {  
  my ($cmd,$udom,$uname,$namespace,$what)  
     =split(/:/,$userinput);  
  $namespace=~s/\//\_/g;  
  $namespace=~s/\W//g;  
  chomp($what);  
  my $proname=propath($udom,$uname);  
  my $now=time;  
  unless ($namespace=~/^nohist\_/) {  
     my $hfh;  
     if (  
  $hfh=IO::File->new(">>$proname/$namespace.hist")  
  ) { print $hfh "D:$now:$what\n"; }  
  }  
  my @keys=split(/\&/,$what);  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  
     foreach my $key (@keys) {  
  delete($hash{$key});  
     }  
     if (untie(%hash)) {  
  print $client "ok\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting del\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting del\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # ------------------------------------------------------------------------ keys  
  } elsif ($userinput =~ /^keys/) {  
     if(isClient) {  
  my ($cmd,$udom,$uname,$namespace)  
     =split(/:/,$userinput);  
  $namespace=~s/\//\_/g;  
  $namespace=~s/\W//g;  
  my $proname=propath($udom,$uname);  
  my $qresult='';  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
     foreach my $key (keys %hash) {  
  $qresult.="$key&";  
     }  
     if (untie(%hash)) {  
  $qresult=~s/\&$//;  
  print $client "$qresult\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting keys\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting keys\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
      
     }  
 # ----------------------------------------------------------------- dumpcurrent  
  } elsif ($userinput =~ /^currentdump/) {  
     if (isClient) {  
  my ($cmd,$udom,$uname,$namespace)  
     =split(/:/,$userinput);  
  $namespace=~s/\//\_/g;  
  $namespace=~s/\W//g;  
  my $qresult='';  
  my $proname=propath($udom,$uname);  
  my %hash;  
  if (tie(%hash,'GDBM_File',  
  "$proname/$namespace.db",  
  &GDBM_READER(),0640)) {  
     # Structure of %data:  
     # $data{$symb}->{$parameter}=$value;  
     # $data{$symb}->{'v.'.$parameter}=$version;  
     # since $parameter will be unescaped, we do not  
     # have to worry about silly parameter names...  
     my %data = ();  
     while (my ($key,$value) = each(%hash)) {  
  my ($v,$symb,$param) = split(/:/,$key);  
  next if ($v eq 'version' || $symb eq 'keys');  
  next if (exists($data{$symb}) &&   
  exists($data{$symb}->{$param}) &&  
  $data{$symb}->{'v.'.$param} > $v);  
  $data{$symb}->{$param}=$value;  
  $data{$symb}->{'v.'.$param}=$v;  
     }  
     if (untie(%hash)) {  
  while (my ($symb,$param_hash) = each(%data)) {  
     while(my ($param,$value) = each (%$param_hash)){  
  next if ($param =~ /^v\./);  
  $qresult.=$symb.':'.$param.'='.$value.'&';  
     }  
  }  
  chop($qresult);  
  print $client "$qresult\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting currentdump\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting currentdump\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
     }  
 # ------------------------------------------------------------------------ dump  
  } elsif ($userinput =~ /^dump/) {  
     if(isClient) {  
  my ($cmd,$udom,$uname,$namespace,$regexp)  
     =split(/:/,$userinput);  
  $namespace=~s/\//\_/g;  
  $namespace=~s/\W//g;  
  if (defined($regexp)) {  
     $regexp=&unescape($regexp);  
  } else {  
     $regexp='.';  
  }  
  my $qresult='';  
  my $proname=propath($udom,$uname);  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
        study($regexp);  
        while (my ($key,$value) = each(%hash)) {  
    if ($regexp eq '.') {  
        $qresult.=$key.'='.$value.'&';  
    } else {  
        my $unescapeKey = &unescape($key);  
        if (eval('$unescapeKey=~/$regexp/')) {  
    $qresult.="$key=$value&";  
        }  
    }  
        }  
        if (untie(%hash)) {  
    chop($qresult);  
    print $client "$qresult\n";  
        } else {  
    print $client "error: ".($!+0)  
        ." untie(GDBM) Failed ".  
                                        "while attempting dump\n";  
        }  
    } else {  
        print $client "error: ".($!+0)  
    ." tie(GDBM) Failed ".  
    "while attempting dump\n";  
    }  
     } else {  
  Reply($client, "refused\n", $userinput);  
     
     }  
 # ----------------------------------------------------------------------- store  
  } elsif ($userinput =~ /^store/) {  
     if(isClient) {  
  my ($cmd,$udom,$uname,$namespace,$rid,$what)  
     =split(/:/,$userinput);  
  $namespace=~s/\//\_/g;  
  $namespace=~s/\W//g;  
  if ($namespace ne 'roles') {  
     chomp($what);  
     my $proname=propath($udom,$uname);  
     my $now=time;  
     unless ($namespace=~/^nohist\_/) {  
  my $hfh;  
  if (  
     $hfh=IO::File->new(">>$proname/$namespace.hist")  
     ) { print $hfh "P:$now:$rid:$what\n"; }  
     }  
     my @pairs=split(/\&/,$what);  
     my %hash;  
     if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  
  my @previouskeys=split(/&/,$hash{"keys:$rid"});  
  my $key;  
  $hash{"version:$rid"}++;  
  my $version=$hash{"version:$rid"};  
  my $allkeys='';   
  foreach my $pair (@pairs) {  
     my ($key,$value)=split(/=/,$pair);  
     $allkeys.=$key.':';  
     $hash{"$version:$rid:$key"}=$value;  
  }  
  $hash{"$version:$rid:timestamp"}=$now;  
  $allkeys.='timestamp';  
  $hash{"$version:keys:$rid"}=$allkeys;  
  if (untie(%hash)) {  
     print $client "ok\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting store\n";  
  }  
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting store\n";  
     }  
  } else {  
     print $client "refused\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
        
     }  
 # --------------------------------------------------------------------- restore  
  } elsif ($userinput =~ /^restore/) {  
     if(isClient) {  
  my ($cmd,$udom,$uname,$namespace,$rid)  
     =split(/:/,$userinput);  
  $namespace=~s/\//\_/g;  
  $namespace=~s/\W//g;  
  chomp($rid);  
  my $proname=propath($udom,$uname);  
  my $qresult='';  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
     my $version=$hash{"version:$rid"};  
     $qresult.="version=$version&";  
     my $scope;  
     for ($scope=1;$scope<=$version;$scope++) {  
  my $vkeys=$hash{"$scope:keys:$rid"};  
  my @keys=split(/:/,$vkeys);  
  my $key;  
  $qresult.="$scope:keys=$vkeys&";  
  foreach $key (@keys) {  
     $qresult.="$scope:$key=".$hash{"$scope:$rid:$key"}."&";  
  }                                    
     }  
     if (untie(%hash)) {  
  $qresult=~s/\&$//;  
  print $client "$qresult\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting restore\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting restore\n";  
  }  
     } else  {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # -------------------------------------------------------------------- chatsend  
  } elsif ($userinput =~ /^chatsend/) {  
     if(isClient) {  
  my ($cmd,$cdom,$cnum,$newpost)=split(/\:/,$userinput);  
  &chatadd($cdom,$cnum,$newpost);  
  print $client "ok\n";  
     } else {  
  Reply($client, "refused\n", $userinput);  
         
     }  
 # -------------------------------------------------------------------- chatretr  
  } elsif ($userinput =~ /^chatretr/) {  
     if(isClient) {  
  my   
     ($cmd,$cdom,$cnum,$udom,$uname)=split(/\:/,$userinput);  
  my $reply='';  
  foreach (&getchat($cdom,$cnum,$udom,$uname)) {  
     $reply.=&escape($_).':';  
  }  
  $reply=~s/\:$//;  
  print $client $reply."\n";  
     } else {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # ------------------------------------------------------------------- querysend  
  } elsif ($userinput =~ /^querysend/) {  
     if(isClient) {  
  my ($cmd,$query,  
     $arg1,$arg2,$arg3)=split(/\:/,$userinput);  
  $query=~s/\n*$//g;  
  print $client "".  
     sqlreply("$clientname\&$query".  
      "\&$arg1"."\&$arg2"."\&$arg3")."\n";  
     } else {  
  Reply($client, "refused\n", $userinput);  
         
     }  
 # ------------------------------------------------------------------ queryreply  
  } elsif ($userinput =~ /^queryreply/) {  
     if(isClient) {  
  my ($cmd,$id,$reply)=split(/:/,$userinput);   
  my $store;  
  my $execdir=$perlvar{'lonDaemons'};  
  if ($store=IO::File->new(">$execdir/tmp/$id")) {  
     $reply=~s/\&/\n/g;  
     print $store $reply;  
     close $store;  
     my $store2=IO::File->new(">$execdir/tmp/$id.end");  
     print $store2 "done\n";  
     close $store2;  
     print $client "ok\n";  
  }  
  else {  
     print $client "error: ".($!+0)  
  ." IO::File->new Failed ".  
  "while attempting queryreply\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
        
     }  
 # ----------------------------------------------------------------- courseidput  
  } elsif ($userinput =~ /^courseidput/) {  
     if(isClient) {  
  my ($cmd,$udom,$what)=split(/:/,$userinput);  
  chomp($what);  
  $udom=~s/\W//g;  
  my $proname=  
     "$perlvar{'lonUsersDir'}/$udom/nohist_courseids";  
  my $now=time;  
  my @pairs=split(/\&/,$what);  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) {  
     foreach my $pair (@pairs) {  
  my ($key,$value)=split(/=/,$pair);  
  $hash{$key}=$value.':'.$now;  
     }  
     if (untie(%hash)) {  
  print $client "ok\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting courseidput\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting courseidput\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # ---------------------------------------------------------------- courseiddump  
  } elsif ($userinput =~ /^courseiddump/) {  
     if(isClient) {  
  my ($cmd,$udom,$since,$description)  
     =split(/:/,$userinput);  
  if (defined($description)) {  
     $description=&unescape($description);  
  } else {  
     $description='.';  
  }  
  unless (defined($since)) { $since=0; }  
  my $qresult='';  
  my $proname=  
     "$perlvar{'lonUsersDir'}/$udom/nohist_courseids";  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) {  
     while (my ($key,$value) = each(%hash)) {  
  my ($descr,$lasttime)=split(/\:/,$value);  
  if ($lasttime<$since) { next; }  
  if ($description eq '.') {  
     $qresult.=$key.'='.$descr.'&';  
  } else {  
     my $unescapeVal = &unescape($descr);  
     if (eval('$unescapeVal=~/$description/i')) {  
  $qresult.="$key=$descr&";  
     }  
  }  
     }  
     if (untie(%hash)) {  
  chop($qresult);  
  print $client "$qresult\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting courseiddump\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting courseiddump\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # ----------------------------------------------------------------------- idput  
  } elsif ($userinput =~ /^idput/) {  
     if(isClient) {  
  my ($cmd,$udom,$what)=split(/:/,$userinput);  
  chomp($what);  
  $udom=~s/\W//g;  
  my $proname="$perlvar{'lonUsersDir'}/$udom/ids";  
  my $now=time;  
  {  
     my $hfh;  
     if (  
  $hfh=IO::File->new(">>$proname.hist")  
  ) { print $hfh "P:$now:$what\n"; }  
  }  
  my @pairs=split(/\&/,$what);  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) {  
     foreach my $pair (@pairs) {  
  my ($key,$value)=split(/=/,$pair);  
  $hash{$key}=$value;  
     }  
     if (untie(%hash)) {  
  print $client "ok\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting idput\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting idput\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # ----------------------------------------------------------------------- idget  
  } elsif ($userinput =~ /^idget/) {  
     if(isClient) {  
  my ($cmd,$udom,$what)=split(/:/,$userinput);  
  chomp($what);  
  $udom=~s/\W//g;  
  my $proname="$perlvar{'lonUsersDir'}/$udom/ids";  
  my @queries=split(/\&/,$what);  
  my $qresult='';  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) {  
     for (my $i=0;$i<=$#queries;$i++) {  
  $qresult.="$hash{$queries[$i]}&";  
     }  
     if (untie(%hash)) {  
  $qresult=~s/\&$//;  
  print $client "$qresult\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting idget\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting idget\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # ---------------------------------------------------------------------- tmpput  
  } elsif ($userinput =~ /^tmpput/) {  
     if(isClient) {  
  my ($cmd,$what)=split(/:/,$userinput);  
  my $store;  
  $tmpsnum++;  
  my $id=$$.'_'.$clientip.'_'.$tmpsnum;  
  $id=~s/\W/\_/g;  
  $what=~s/\n//g;  
  my $execdir=$perlvar{'lonDaemons'};  
  if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) {  
     print $store $what;  
     close $store;  
     print $client "$id\n";  
  }  
  else {  
     print $client "error: ".($!+0)  
  ."IO::File->new Failed ".  
  "while attempting tmpput\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
       
     }  
       
 # ---------------------------------------------------------------------- tmpget  
  } elsif ($userinput =~ /^tmpget/) {  
     if(isClient) {  
  my ($cmd,$id)=split(/:/,$userinput);  
  chomp($id);  
  $id=~s/\W/\_/g;  
  my $store;  
  my $execdir=$perlvar{'lonDaemons'};  
  if ($store=IO::File->new("$execdir/tmp/$id.tmp")) {  
     my $reply=<$store>;  
     print $client "$reply\n";  
     close $store;  
  }  
  else {  
     print $client "error: ".($!+0)  
  ."IO::File->new Failed ".  
  "while attempting tmpget\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
         
     }  
 # ---------------------------------------------------------------------- tmpdel  
  } elsif ($userinput =~ /^tmpdel/) {  
     if(isClient) {  
  my ($cmd,$id)=split(/:/,$userinput);  
  chomp($id);  
  $id=~s/\W/\_/g;  
  my $execdir=$perlvar{'lonDaemons'};  
  if (unlink("$execdir/tmp/$id.tmp")) {  
     print $client "ok\n";  
  } else {  
     print $client "error: ".($!+0)  
  ."Unlink tmp Failed ".  
  "while attempting tmpdel\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
        
     }  
 # -------------------------------------------------------------------------- ls  
  } elsif ($userinput =~ /^ls/) {  
     if(isClient) {  
  my ($cmd,$ulsdir)=split(/:/,$userinput);  
  my $ulsout='';  
  my $ulsfn;  
  if (-e $ulsdir) {  
     if(-d $ulsdir) {  
  if (opendir(LSDIR,$ulsdir)) {  
     while ($ulsfn=readdir(LSDIR)) {  
  my @ulsstats=stat($ulsdir.'/'.$ulsfn);  
  $ulsout.=$ulsfn.'&'.  
     join('&',@ulsstats).':';  
     }  
     closedir(LSDIR);  
  }  
     } else {  
  my @ulsstats=stat($ulsdir);  
  $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';  
     }  
  } else {  
     $ulsout='no_such_dir';  
  }  
  if ($ulsout eq '') { $ulsout='empty'; }  
  print $client "$ulsout\n";  
     } else {  
  Reply($client, "refused\n", $userinput);  
        
     }  
 # ----------------------------------------------------------------- setannounce  
  } elsif ($userinput =~ /^setannounce/) {  
     if (isClient) {  
  my ($cmd,$announcement)=split(/:/,$userinput);  
  chomp($announcement);  
  $announcement=&unescape($announcement);  
  if (my $store=IO::File->new('>'.$perlvar{'lonDocRoot'}.  
     '/announcement.txt')) {  
     print $store $announcement;  
     close $store;  
     print $client "ok\n";  
  } else {  
     print $client "error: ".($!+0)."\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # ------------------------------------------------------------------ Hanging up  
  } elsif (($userinput =~ /^exit/) ||  
  ($userinput =~ /^init/)) { # no restrictions.  
     &logthis(  
      "Client $clientip ($clientname) hanging up: $userinput");  
     print $client "bye\n";  
     $client->close();  
     last;  
   
 # ---------------------------------- set current host/domain  
  } elsif ($userinput =~ /^sethost:/) {  
     if (isClient) {  
  print $client &sethost($userinput)."\n";  
     } else {  
  print $client "refused\n";  
     }  
 #---------------------------------- request file (?) version.  
  } elsif ($userinput =~/^version:/) {  
     if (isClient) {  
  print $client &version($userinput)."\n";  
     } else {  
  print $client "refused\n";  
     }  
 # ------------------------------------------------------------- unknown command  
   
  } else {  
     # unknown command  
     print $client "unknown_cmd\n";  
  }  
 # -------------------------------------------------------------------- complete  
  alarm(0);   alarm(0);
  &status('Listening to '.$clientname);   &status('Listening to '.$clientname." ($keymode)");   
     }      }
   
 # --------------------------------------------- client unknown or fishy, refuse  # --------------------------------------------- client unknown or fishy, refuse
  } else {   }  else {
     print $client "refused\n";      print $client "refused\n";
     $client->close();      $client->close();
     &logthis("<font color=blue>WARNING: "      &logthis("<font color='blue'>WARNING: "
      ."Rejected client $clientip, closing connection</font>");       ."Rejected client $clientip, closing connection</font>");
  }   }
     }                   }            
           
 # =============================================================================  # =============================================================================
           
     &logthis("<font color=red>CRITICAL: "      &logthis("<font color='red'>CRITICAL: "
      ."Disconnect from $clientip ($clientname)</font>");           ."Disconnect from $clientip ($clientname)</font>");    
           
           
Line 2563  sub make_new_child { Line 3936  sub make_new_child {
 #  #
 sub ManagePermissions  sub ManagePermissions
 {  {
     my $request = shift;  
     my $domain  = shift;      my ($request, $domain, $user, $authtype) = @_;
     my $user    = shift;  
     my $authtype= shift;  
   
     # See if the request is of the form /$domain/_au      # See if the request is of the form /$domain/_au
     &logthis("ruequest is $request");  
     if($request =~ /^(\/$domain\/_au)$/) { # It's an author rolesput...      if($request =~ /^(\/$domain\/_au)$/) { # It's an author rolesput...
  my $execdir = $perlvar{'lonDaemons'};   my $execdir = $perlvar{'lonDaemons'};
  my $userhome= "/home/$user" ;   my $userhome= "/home/$user" ;
Line 2577  sub ManagePermissions Line 3947  sub ManagePermissions
  system("$execdir/lchtmldir $userhome $user $authtype");   system("$execdir/lchtmldir $userhome $user $authtype");
     }      }
 }  }
   
   
   #
   #  Return the full path of a user password file, whether it exists or not.
   # Parameters:
   #   domain     - Domain in which the password file lives.
   #   user       - name of the user.
   # Returns:
   #    Full passwd path:
   #
   sub password_path {
       my ($domain, $user) = @_;
   
   
       my $path   = &propath($domain, $user);
       $path  .= "/passwd";
   
       return $path;
   }
   
   #   Password Filename
   #   Returns the path to a passwd file given domain and user... only if
   #  it exists.
   # Parameters:
   #   domain    - Domain in which to search.
   #   user      - username.
   # Returns:
   #   - If the password file exists returns its path.
   #   - If the password file does not exist, returns undefined.
   #
   sub password_filename {
       my ($domain, $user) = @_;
   
       Debug ("PasswordFilename called: dom = $domain user = $user");
   
       my $path  = &password_path($domain, $user);
       Debug("PasswordFilename got path: $path");
       if(-e $path) {
    return $path;
       } else {
    return undef;
       }
   }
   
   #
   #   Rewrite the contents of the user's passwd file.
   #  Parameters:
   #    domain    - domain of the user.
   #    name      - User's name.
   #    contents  - New contents of the file.
   # Returns:
   #   0    - Failed.
   #   1    - Success.
   #
   sub rewrite_password_file {
       my ($domain, $user, $contents) = @_;
   
       my $file = &password_filename($domain, $user);
       if (defined $file) {
    my $pf = IO::File->new(">$file");
    if($pf) {
       print $pf "$contents\n";
       return 1;
    } else {
       return 0;
    }
       } else {
    return 0;
       }
   
   }
   
 #  #
 #   GetAuthType - Determines the authorization type of a user in a domain.  #   get_auth_type - Determines the authorization type of a user in a domain.
   
 #     Returns the authorization type or nouser if there is no such user.  #     Returns the authorization type or nouser if there is no such user.
 #  #
 sub GetAuthType   sub get_auth_type 
 {  {
     my $domain = shift;  
     my $user   = shift;  
   
     Debug("GetAuthType( $domain, $user ) \n");      my ($domain, $user)  = @_;
   
       Debug("get_auth_type( $domain, $user ) \n");
     my $proname    = &propath($domain, $user);       my $proname    = &propath($domain, $user); 
     my $passwdfile = "$proname/passwd";      my $passwdfile = "$proname/passwd";
     if( -e $passwdfile ) {      if( -e $passwdfile ) {
Line 2603  sub GetAuthType Line 4045  sub GetAuthType
  }   }
   
  return "$authtype:$availinfo";   return "$authtype:$availinfo";
     }      } else {
     else {  
  Debug("Returning nouser");   Debug("Returning nouser");
  return "nouser";   return "nouser";
     }      }
 }  }
   
   #
   #  Validate a user given their domain, name and password.  This utility
   #  function is used by both  AuthenticateHandler and ChangePasswordHandler
   #  to validate the login credentials of a user.
   # Parameters:
   #    $domain    - The domain being logged into (this is required due to
   #                 the capability for multihomed systems.
   #    $user      - The name of the user being validated.
   #    $password  - The user's propoposed password.
   #
   # Returns:
   #     1        - The domain,user,pasword triplet corresponds to a valid
   #                user.
   #     0        - The domain,user,password triplet is not a valid user.
   #
   sub validate_user {
       my ($domain, $user, $password) = @_;
   
   
       # Why negative ~pi you may well ask?  Well this function is about
       # authentication, and therefore very important to get right.
       # I've initialized the flag that determines whether or not I've 
       # validated correctly to a value it's not supposed to get.
       # At the end of this function. I'll ensure that it's not still that
       # value so we don't just wind up returning some accidental value
       # as a result of executing an unforseen code path that
       # did not set $validated.
   
       my $validated = -3.14159;
   
       #  How we authenticate is determined by the type of authentication
       #  the user has been assigned.  If the authentication type is
       #  "nouser", the user does not exist so we will return 0.
   
       my $contents = &get_auth_type($domain, $user);
       my ($howpwd, $contentpwd) = split(/:/, $contents);
   
       my $null = pack("C",0); # Used by kerberos auth types.
   
       if ($howpwd ne 'nouser') {
   
    if($howpwd eq "internal") { # Encrypted is in local password file.
       $validated = (crypt($password, $contentpwd) eq $contentpwd);
    }
    elsif ($howpwd eq "unix") { # User is a normal unix user.
       $contentpwd = (getpwnam($user))[1];
       if($contentpwd) {
    if($contentpwd eq 'x') { # Shadow password file...
       my $pwauth_path = "/usr/local/sbin/pwauth";
       open PWAUTH,  "|$pwauth_path" or
    die "Cannot invoke authentication";
       print PWAUTH "$user\n$password\n";
       close PWAUTH;
       $validated = ! $?;
   
    } else {         # Passwords in /etc/passwd. 
       $validated = (crypt($password,
    $contentpwd) eq $contentpwd);
    }
       } else {
    $validated = 0;
       }
    }
    elsif ($howpwd eq "krb4") { # user is in kerberos 4 auth. domain.
       if(! ($password =~ /$null/) ) {
    my $k4error = &Authen::Krb4::get_pw_in_tkt($user,
      "",
      $contentpwd,,
      'krbtgt',
      $contentpwd,
      1,
      $password);
    if(!$k4error) {
       $validated = 1;
    } else {
       $validated = 0;
       &logthis('krb4: '.$user.', '.$contentpwd.', '.
        &Authen::Krb4::get_err_txt($Authen::Krb4::error));
    }
       } else {
    $validated = 0; # Password has a match with null.
       }
    } elsif ($howpwd eq "krb5") { # User is in kerberos 5 auth. domain.
       if(!($password =~ /$null/)) { # Null password not allowed.
    my $krbclient = &Authen::Krb5::parse_name($user.'@'
     .$contentpwd);
    my $krbservice = "krbtgt/".$contentpwd."\@".$contentpwd;
    my $krbserver  = &Authen::Krb5::parse_name($krbservice);
    my $credentials= &Authen::Krb5::cc_default();
    $credentials->initialize($krbclient);
    my $krbreturn  = &Authen::KRb5::get_in_tkt_with_password($krbclient,
    $krbserver,
    $password,
    $credentials);
    $validated = ($krbreturn == 1);
       } else {
    $validated = 0;
       }
    } elsif ($howpwd eq "localauth") { 
       #  Authenticate via installation specific authentcation method:
       $validated = &localauth::localauth($user, 
          $password, 
          $contentpwd);
    } else { # Unrecognized auth is also bad.
       $validated = 0;
    }
       } else {
    $validated = 0;
       }
       #
       #  $validated has the correct stat of the authentication:
       #
   
       unless ($validated != -3.14159) {
    die "ValidateUser - failed to set the value of validated";
       }
       return $validated;
   }
   
   
 sub addline {  sub addline {
     my ($fname,$hostid,$ip,$newline)=@_;      my ($fname,$hostid,$ip,$newline)=@_;
     my $contents;      my $contents;
Line 2694  sub chatadd { Line 4255  sub chatadd {
 sub unsub {  sub unsub {
     my ($fname,$clientip)=@_;      my ($fname,$clientip)=@_;
     my $result;      my $result;
       my $unsubs = 0; # Number of successful unsubscribes:
   
   
       # An old way subscriptions were handled was to have a 
       # subscription marker file:
   
       Debug("Attempting unlink of $fname.$clientname");
     if (unlink("$fname.$clientname")) {      if (unlink("$fname.$clientname")) {
  $result="ok\n";   $unsubs++; # Successful unsub via marker file.
     } else {      } 
  $result="not_subscribed\n";  
     }      # The more modern way to do it is to have a subscription list
       # file:
   
     if (-e "$fname.subscription") {      if (-e "$fname.subscription") {
  my $found=&addline($fname,$clientname,$clientip,'');   my $found=&addline($fname,$clientname,$clientip,'');
  if ($found) { $result="ok\n"; }   if ($found) { 
       $unsubs++;
    }
       } 
   
       #  If either or both of these mechanisms succeeded in unsubscribing a 
       #  resource we can return ok:
   
       if($unsubs) {
    $result = "ok\n";
     } else {      } else {
  if ($result != "ok\n") { $result="not_subscribed\n"; }   $result = "not_subscribed\n";
     }      }
   
     return $result;      return $result;
 }  }
   
Line 2826  sub make_passwd_file { Line 4406  sub make_passwd_file {
  }   }
     } elsif ($umode eq 'unix') {      } elsif ($umode eq 'unix') {
  {   {
     my $execpath="$perlvar{'lonDaemons'}/"."lcuseradd";      #
       #  Don't allow the creation of privileged accounts!!! that would
       #  be real bad!!!
       #
       my $uid = getpwnam($uname);
       if((defined $uid) && ($uid == 0)) {
    &logthis(">>>Attempted to create privilged account blocked");
    return "no_priv_account_error\n";
       }
   
       my $execpath       ="$perlvar{'lonDaemons'}/"."lcuseradd";
   
       my $lc_error_file  = $execdir."/tmp/lcuseradd".$$.".status";
     {      {
  &Debug("Executing external: ".$execpath);   &Debug("Executing external: ".$execpath);
  &Debug("user  = ".$uname.", Password =". $npass);   &Debug("user  = ".$uname.", Password =". $npass);
Line 2834  sub make_passwd_file { Line 4426  sub make_passwd_file {
  print $se "$uname\n";   print $se "$uname\n";
  print $se "$npass\n";   print $se "$npass\n";
  print $se "$npass\n";   print $se "$npass\n";
    print $se "$lc_error_file\n"; # Status -> unique file.
     }      }
     my $useraddok = $?;      my $error = IO::File->new("< $lc_error_file");
       my $useraddok = <$error>;
       $error->close;
       unlink($lc_error_file);
   
       chomp $useraddok;
   
     if($useraddok > 0) {      if($useraddok > 0) {
  &logthis("Failed lcuseradd: ".&lcuseraddstrerror($useraddok));   my $error_text = &lcuseraddstrerror($useraddok);
    &logthis("Failed lcuseradd: $error_text");
    $result = "lcuseradd_failed:$error_text\n";
       }  else {
    my $pf = IO::File->new(">$passfilename");
    print $pf "unix:\n";
     }      }
     my $pf = IO::File->new(">$passfilename");  
     print $pf "unix:\n";  
  }   }
     } elsif ($umode eq 'none') {      } elsif ($umode eq 'none') {
  {   {
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new("> $passfilename");
     print $pf "none:\n";      print $pf "none:\n";
  }   }
     } else {      } else {
Line 2858  sub sethost { Line 4460  sub sethost {
     my (undef,$hostid)=split(/:/,$remotereq);      my (undef,$hostid)=split(/:/,$remotereq);
     if (!defined($hostid)) { $hostid=$perlvar{'lonHostID'}; }      if (!defined($hostid)) { $hostid=$perlvar{'lonHostID'}; }
     if ($hostip{$perlvar{'lonHostID'}} eq $hostip{$hostid}) {      if ($hostip{$perlvar{'lonHostID'}} eq $hostip{$hostid}) {
  $currenthostid=$hostid;   $currenthostid  =$hostid;
  $currentdomainid=$hostdom{$hostid};   $currentdomainid=$hostdom{$hostid};
  &logthis("Setting hostid to $hostid, and domain to $currentdomainid");   &logthis("Setting hostid to $hostid, and domain to $currentdomainid");
     } else {      } else {
Line 2898  sub userload { Line 4500  sub userload {
     return $userloadpercent;      return $userloadpercent;
 }  }
   
   # Routines for serializing arrays and hashes (copies from lonnet)
   
   sub array2str {
     my (@array) = @_;
     my $result=&arrayref2str(\@array);
     $result=~s/^__ARRAY_REF__//;
     $result=~s/__END_ARRAY_REF__$//;
     return $result;
   }
                                                                                    
   sub arrayref2str {
     my ($arrayref) = @_;
     my $result='__ARRAY_REF__';
     foreach my $elem (@$arrayref) {
       if(ref($elem) eq 'ARRAY') {
         $result.=&arrayref2str($elem).'&';
       } elsif(ref($elem) eq 'HASH') {
         $result.=&hashref2str($elem).'&';
       } elsif(ref($elem)) {
         #print("Got a ref of ".(ref($elem))." skipping.");
       } else {
         $result.=&escape($elem).'&';
       }
     }
     $result=~s/\&$//;
     $result .= '__END_ARRAY_REF__';
     return $result;
   }
                                                                                    
   sub hash2str {
     my (%hash) = @_;
     my $result=&hashref2str(\%hash);
     $result=~s/^__HASH_REF__//;
     $result=~s/__END_HASH_REF__$//;
     return $result;
   }
                                                                                    
   sub hashref2str {
     my ($hashref)=@_;
     my $result='__HASH_REF__';
     foreach (sort(keys(%$hashref))) {
       if (ref($_) eq 'ARRAY') {
         $result.=&arrayref2str($_).'=';
       } elsif (ref($_) eq 'HASH') {
         $result.=&hashref2str($_).'=';
       } elsif (ref($_)) {
         $result.='=';
         #print("Got a ref of ".(ref($_))." skipping.");
       } else {
           if ($_) {$result.=&escape($_).'=';} else { last; }
       }
   
       if(ref($hashref->{$_}) eq 'ARRAY') {
         $result.=&arrayref2str($hashref->{$_}).'&';
       } elsif(ref($hashref->{$_}) eq 'HASH') {
         $result.=&hashref2str($hashref->{$_}).'&';
       } elsif(ref($hashref->{$_})) {
          $result.='&';
         #print("Got a ref of ".(ref($hashref->{$_}))." skipping.");
       } else {
         $result.=&escape($hashref->{$_}).'&';
       }
     }
     $result=~s/\&$//;
     $result .= '__END_HASH_REF__';
     return $result;
   }
   
 # ----------------------------------- POD (plain old documentation, CPAN style)  # ----------------------------------- POD (plain old documentation, CPAN style)
   
 =head1 NAME  =head1 NAME

Removed from v.1.163  
changed lines
  Added in v.1.228


FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>