Diff for /loncom/lond between versions 1.228 and 1.243

version 1.228, 2004/08/10 22:55:31 version 1.243, 2004/08/27 18:34:31
Line 1282  sub push_file_handler { Line 1282  sub push_file_handler {
 }  }
 &register_handler("pushfile", \&push_file_handler, 1, 0, 1);  &register_handler("pushfile", \&push_file_handler, 1, 0, 1);
   
   #
   #   du  - list the disk usuage of a directory recursively. 
   #    
   #   note: stolen code from the ls file handler
   #   under construction by Rick Banghart 
   #    .
   # Parameters:
   #    $cmd        - The command that dispatched us (du).
   #    $ududir     - The directory path to list... I'm not sure what this
   #                  is relative as things like ls:. return e.g.
   #                  no_such_dir.
   #    $client     - Socket open on the client.
   # Returns:
   #     1 - indicating that the daemon should not disconnect.
   # Side Effects:
   #   The reply is written to  $client.
   #
   sub du_handler {
       my ($cmd, $ududir, $client) = @_;
       my $userinput = "$cmd:$ududir";
       my $obs;
       my $rights;
       my $uduout='';
       my $udufn;
       print $client "from lond not yet\n";
       return 1;
   }
   &register_handler("du", \&du_handler, 0, 1, 0);
   
   
   
   #
   #   ls  - list the contents of a directory.  For each file in the
   #    selected directory the filename followed by the full output of
   #    the stat function is returned.  The returned info for each
   #    file are separated by ':'.  The stat fields are separated by &'s.
   # Parameters:
   #    $cmd        - The command that dispatched us (ls).
   #    $ulsdir     - The directory path to list... I'm not sure what this
   #                  is relative as things like ls:. return e.g.
   #                  no_such_dir.
   #    $client     - Socket open on the client.
   # Returns:
   #     1 - indicating that the daemon should not disconnect.
   # Side Effects:
   #   The reply is written to  $client.
   #
   sub ls_handler {
       my ($cmd, $ulsdir, $client) = @_;
   
       my $userinput = "$cmd:$ulsdir";
   
       my $obs;
       my $rights;
       my $ulsout='';
       my $ulsfn;
       if (-e $ulsdir) {
    if(-d $ulsdir) {
       if (opendir(LSDIR,$ulsdir)) {
    while ($ulsfn=readdir(LSDIR)) {
       undef $obs, $rights; 
       my @ulsstats=stat($ulsdir.'/'.$ulsfn);
       #We do some obsolete checking here
       if(-e $ulsdir.'/'.$ulsfn.".meta") { 
    open(FILE, $ulsdir.'/'.$ulsfn.".meta");
    my @obsolete=<FILE>;
    foreach my $obsolete (@obsolete) {
       if($obsolete =~ m|(<obsolete>)(on)|) { $obs = 1; } 
       if($obsolete =~ m|(<copyright>)(default)|) { $rights = 1; }
    }
       }
       $ulsout.=$ulsfn.'&'.join('&',@ulsstats);
       if($obs eq '1') { $ulsout.="&1"; }
       else { $ulsout.="&0"; }
       if($rights eq '1') { $ulsout.="&1:"; }
       else { $ulsout.="&0:"; }
    }
    closedir(LSDIR);
       }
    } else {
       my @ulsstats=stat($ulsdir);
       $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
    }
       } else {
    $ulsout='no_such_dir';
       }
       if ($ulsout eq '') { $ulsout='empty'; }
       print $client "$ulsout\n";
       
       return 1;
   
   }
   &register_handler("ls", \&ls_handler, 0, 1, 0);
   
   
   
   
 #   Process a reinit request.  Reinit requests that either  #   Process a reinit request.  Reinit requests that either
Line 1756  sub fetch_user_file_handler { Line 1851  sub fetch_user_file_handler {
   
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
     my $fname           = $tail;      my $fname           = $tail;
     my ($udom,$uname,$ufile)=split(/\//,$fname);      my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|);
     my $udir=&propath($udom,$uname).'/userfiles';      my $udir=&propath($udom,$uname).'/userfiles';
     unless (-e $udir) {      unless (-e $udir) {
  mkdir($udir,0770);    mkdir($udir,0770); 
     }      }
       Debug("fetch user file for $fname");
     if (-e $udir) {      if (-e $udir) {
  $ufile=~s/^[\.\~]+//;   $ufile=~s/^[\.\~]+//;
  $ufile=~s/\///g;  
    # IF necessary, create the path right down to the file.
    # Note that any regular files in the way of this path are
    # wiped out to deal with some earlier folly of mine.
   
    my $path = $udir;
    if ($ufile =~m|(.+)/([^/]+)$|) {
       my @parts=split('/',$1);
       foreach my $part (@parts) {
    $path .= '/'.$part;
    if( -f $path) {
       unlink($path);
    }
    if ((-e $path)!=1) {
       mkdir($path,0770);
    }
       }
    }
   
   
  my $destname=$udir.'/'.$ufile;   my $destname=$udir.'/'.$ufile;
  my $transname=$udir.'/'.$ufile.'.in.transit';   my $transname=$udir.'/'.$ufile.'.in.transit';
  my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;   my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;
  my $response;   my $response;
    Debug("Remote URL : $remoteurl Transfername $transname Destname: $destname");
  alarm(120);   alarm(120);
  {   {
     my $ua=new LWP::UserAgent;      my $ua=new LWP::UserAgent;
Line 1781  sub fetch_user_file_handler { Line 1897  sub fetch_user_file_handler {
     &logthis("LWP GET: $message for $fname ($remoteurl)");      &logthis("LWP GET: $message for $fname ($remoteurl)");
     &Failure($client, "failed\n", $userinput);      &Failure($client, "failed\n", $userinput);
  } else {   } else {
       Debug("Renaming $transname to $destname");
     if (!rename($transname,$destname)) {      if (!rename($transname,$destname)) {
  &logthis("Unable to move $transname to $destname");   &logthis("Unable to move $transname to $destname");
  unlink($transname);   unlink($transname);
Line 1821  sub remove_user_file_handler { Line 1938  sub remove_user_file_handler {
  if (-e $udir) {   if (-e $udir) {
     my $file=$udir.'/userfiles/'.$ufile;      my $file=$udir.'/userfiles/'.$ufile;
     if (-e $file) {      if (-e $file) {
  unlink($file);          if (-f $file){
       unlink($file);
    } elsif(-d $file) {
       rmdir($file);
    }
  if (-e $file) {   if (-e $file) {
     &Failure($client, "failed\n", "$cmd:$tail");      &Failure($client, "failed\n", "$cmd:$tail");
  } else {   } else {
Line 1838  sub remove_user_file_handler { Line 1959  sub remove_user_file_handler {
 }  }
 &register_handler("removeuserfile", \&remove_user_file_handler, 0,1,0);  &register_handler("removeuserfile", \&remove_user_file_handler, 0,1,0);
   
   #
   #   make a directory in a user's home directory userfiles subdirectory.
   # Parameters:
   #    cmd   - the Lond request keyword that got us here.
   #    tail  - the part of the command past the keyword.
   #    client- File descriptor connected with the client.
   #
   # Returns:
   #    1    - Continue processing.
   
   sub mkdir_user_file_handler {
       my ($cmd, $tail, $client) = @_;
   
       my ($dir) = split(/:/, $tail); # Get rid of any tailing :'s lonc may have sent.
       $dir=&unescape($dir);
       my ($udom,$uname,$ufile) = ($dir =~ m|^([^/]+)/([^/]+)/(.+)$|);
       if ($ufile =~m|/\.\./|) {
    # any files paths with /../ in them refuse 
    # to deal with
    &Failure($client, "refused\n", "$cmd:$tail");
       } else {
    my $udir = &propath($udom,$uname);
    if (-e $udir) {
       my $newdir=$udir.'/userfiles/'.$ufile;
       if (!-e $newdir) {
    mkdir($newdir);
    if (!-e $newdir) {
       &Failure($client, "failed\n", "$cmd:$tail");
    } else {
       &Reply($client, "ok\n", "$cmd:$tail");
    }
       } else {
    &Failure($client, "not_found\n", "$cmd:$tail");
       }
    } else {
       &Failure($client, "not_home\n", "$cmd:$tail");
    }
       }
       return 1;
   }
   &register_handler("mkdiruserfile", \&mkdir_user_file_handler, 0,1,0);
   
   #
   #   rename a file in a user's home directory userfiles subdirectory.
   # Parameters:
   #    cmd   - the Lond request keyword that got us here.
   #    tail  - the part of the command past the keyword.
   #    client- File descriptor connected with the client.
   #
   # Returns:
   #    1    - Continue processing.
   
   sub rename_user_file_handler {
       my ($cmd, $tail, $client) = @_;
   
       my ($udom,$uname,$old,$new) = split(/:/, $tail);
       $old=&unescape($old);
       $new=&unescape($new);
       if ($new =~m|/\.\./| || $old =~m|/\.\./|) {
    # any files paths with /../ in them refuse to deal with
    &Failure($client, "refused\n", "$cmd:$tail");
       } else {
    my $udir = &propath($udom,$uname);
    if (-e $udir) {
       my $oldfile=$udir.'/userfiles/'.$old;
       my $newfile=$udir.'/userfiles/'.$new;
       if (-e $newfile) {
    &Failure($client, "exists\n", "$cmd:$tail");
       } elsif (! -e $oldfile) {
    &Failure($client, "not_found\n", "$cmd:$tail");
       } else {
    if (!rename($oldfile,$newfile)) {
       &Failure($client, "failed\n", "$cmd:$tail");
    } else {
       &Reply($client, "ok\n", "$cmd:$tail");
    }
       }
    } else {
       &Failure($client, "not_home\n", "$cmd:$tail");
    }
       }
       return 1;
   }
   &register_handler("renameuserfile", \&rename_user_file_handler, 0,1,0);
   
   
 #  #
 #  Authenticate access to a user file by checking the user's   #  Authenticate access to a user file by checking the user's 
Line 1872  sub token_auth_user_file_handler { Line 2078  sub token_auth_user_file_handler {
 }  }
   
 &register_handler("tokenauthuserfile", \&token_auth_user_file_handler, 0,1,0);  &register_handler("tokenauthuserfile", \&token_auth_user_file_handler, 0,1,0);
   
   
   #
   #   Unsubscribe from a resource.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub unsubscribe_handler {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput= "$cmd:$tail";
       
       my ($fname) = split(/:/,$tail); # Split in case there's extrs.
   
       &Debug("Unsubscribing $fname");
       if (-e $fname) {
    &Debug("Exists");
    &Reply($client, &unsub($fname,$clientip), $userinput);
       } else {
    &Failure($client, "not_found\n", $userinput);
       }
       return 1;
   }
   &register_handler("unsub", \&unsubscribe_handler, 0, 1, 0);
   #   Subscribe to a resource
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub subscribe_handler {
       my ($cmd, $tail, $client)= @_;
   
       my $userinput  = "$cmd:$tail";
   
       &Reply( $client, &subscribe($userinput,$clientip), $userinput);
   
       return 1;
   }
   &register_handler("sub", \&subscribe_handler, 0, 1, 0);
   
   #
   #   Determine the version of a resource (?) Or is it return
   #   the top version of the resource?  Not yet clear from the
   #   code in currentversion.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub current_version_handler {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput= "$cmd:$tail";
      
       my $fname   = $tail;
       &Reply( $client, &currentversion($fname)."\n", $userinput);
       return 1;
   
   }
   &register_handler("currentversion", \&current_version_handler, 0, 1, 0);
   
   #  Make an entry in a user's activity log.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub activity_log_handler {
       my ($cmd, $tail, $client) = @_;
   
   
       my $userinput= "$cmd:$tail";
   
       my ($udom,$uname,$what)=split(/:/,$tail);
       chomp($what);
       my $proname=&propath($udom,$uname);
       my $now=time;
       my $hfh;
       if ($hfh=IO::File->new(">>$proname/activity.log")) { 
    print $hfh "$now:$clientname:$what\n";
    &Reply( $client, "ok\n", $userinput); 
       } else {
    &Failure($client, "error: ".($!+0)." IO::File->new Failed "
    ."while attempting log\n", 
    $userinput);
       }
   
       return 1;
   }
   register_handler("log", \&activity_log_handler, 0, 1, 0);
   
   #
   #   Put a namespace entry in a user profile hash.
   #   My druthers would be for this to be an encrypted interaction too.
   #   anything that might be an inadvertent covert channel about either
   #   user authentication or user personal information....
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub put_user_profile_entry {
       my ($cmd, $tail, $client)  = @_;
   
       my $userinput = "$cmd:$tail";
       
       my ($udom,$uname,$namespace,$what) =split(/:/,$tail,4);
       if ($namespace ne 'roles') {
    chomp($what);
    my $hashref = &tie_user_hash($udom, $uname, $namespace,
     &GDBM_WRCREAT(),"P",$what);
    if($hashref) {
       my @pairs=split(/\&/,$what);
       foreach my $pair (@pairs) {
    my ($key,$value)=split(/=/,$pair);
    $hashref->{$key}=$value;
       }
       if (untie(%$hashref)) {
    &Reply( $client, "ok\n", $userinput);
       } else {
    &Failure($client, "error: ".($!+0)." untie(GDBM) failed ".
    "while attempting put\n", 
    $userinput);
       }
    } else {
       &Failure( $client, "error: ".($!)." tie(GDBM) Failed ".
        "while attempting put\n", $userinput);
    }
       } else {
           &Failure( $client, "refused\n", $userinput);
       }
       
       return 1;
   }
   &register_handler("put", \&put_user_profile_entry, 0, 1, 0);
   
   # 
   #   Increment a profile entry in the user history file.
   #   The history contains keyword value pairs.  In this case,
   #   The value itself is a pair of numbers.  The first, the current value
   #   the second an increment that this function applies to the current
   #   value.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub increment_user_value_handler {
       my ($cmd, $tail, $client) = @_;
       
       my $userinput   = "$cmd:$tail";
       
       my ($udom,$uname,$namespace,$what) =split(/:/,$tail);
       if ($namespace ne 'roles') {
           chomp($what);
    my $hashref = &tie_user_hash($udom, $uname,
        $namespace, &GDBM_WRCREAT(),
        "P",$what);
    if ($hashref) {
       my @pairs=split(/\&/,$what);
       foreach my $pair (@pairs) {
    my ($key,$value)=split(/=/,$pair);
    # We could check that we have a number...
    if (! defined($value) || $value eq '') {
       $value = 1;
    }
    $hashref->{$key}+=$value;
       }
       if (untie(%$hashref)) {
    &Reply( $client, "ok\n", $userinput);
       } else {
    &Failure($client, "error: ".($!+0)." untie(GDBM) failed ".
    "while attempting inc\n", $userinput);
       }
    } else {
       &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
        "while attempting inc\n", $userinput);
    }
       } else {
    &Failure($client, "refused\n", $userinput);
       }
       
       return 1;
   }
   &register_handler("inc", \&increment_user_value_handler, 0, 1, 0);
   
   
   #
   #   Put a new role for a user.  Roles are LonCAPA's packaging of permissions.
   #   Each 'role' a user has implies a set of permissions.  Adding a new role
   #   for a person grants the permissions packaged with that role
   #   to that user when the role is selected.
   #
   # Parameters:
   #    $cmd       - The command string (rolesput).
   #    $tail      - The remainder of the request line.  For rolesput this
   #                 consists of a colon separated list that contains:
   #                 The domain and user that is granting the role (logged).
   #                 The domain and user that is getting the role.
   #                 The roles being granted as a set of & separated pairs.
   #                 each pair a key value pair.
   #    $client    - File descriptor connected to the client.
   # Returns:
   #     0         - If the daemon should exit
   #     1         - To continue processing.
   #
   #
   sub roles_put_handler {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput  = "$cmd:$tail";
   
       my ( $exedom, $exeuser, $udom, $uname,  $what) = split(/:/,$tail);
       
   
       my $namespace='roles';
       chomp($what);
       my $hashref = &tie_user_hash($udom, $uname, $namespace,
    &GDBM_WRCREAT(), "P",
    "$exedom:$exeuser:$what");
       #
       #  Log the attempt to set a role.  The {}'s here ensure that the file 
       #  handle is open for the minimal amount of time.  Since the flush
       #  is done on close this improves the chances the log will be an un-
       #  corrupted ordered thing.
       if ($hashref) {
    my @pairs=split(/\&/,$what);
    foreach my $pair (@pairs) {
       my ($key,$value)=split(/=/,$pair);
       &manage_permissions($key, $udom, $uname,
          &get_auth_type( $udom, $uname));
       $hashref->{$key}=$value;
    }
    if (untie($hashref)) {
       &Reply($client, "ok\n", $userinput);
    } else {
       &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
        "while attempting rolesput\n", $userinput);
    }
       } else {
    &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting rolesput\n", $userinput);
       }
       return 1;
   }
   &register_handler("rolesput", \&roles_put_handler, 1,1,0);  # Encoded client only.
   
   #
   #   Deletes (removes) a role for a user.   This is equivalent to removing
   #  a permissions package associated with the role from the user's profile.
   #
   # Parameters:
   #     $cmd                 - The command (rolesdel)
   #     $tail                - The remainder of the request line. This consists
   #                             of:
   #                             The domain and user requesting the change (logged)
   #                             The domain and user being changed.
   #                             The roles being revoked.  These are shipped to us
   #                             as a bunch of & separated role name keywords.
   #     $client              - The file handle open on the client.
   # Returns:
   #     1                    - Continue processing
   #     0                    - Exit.
   #
   sub roles_delete_handler {
       my ($cmd, $tail, $client)  = @_;
   
       my $userinput    = "$cmd:$tail";
      
       my ($exedom,$exeuser,$udom,$uname,$what)=split(/:/,$tail);
       &Debug("cmd = ".$cmd." exedom= ".$exedom."user = ".$exeuser." udom=".$udom.
      "what = ".$what);
       my $namespace='roles';
       chomp($what);
       my $hashref = &tie_user_hash($udom, $uname, $namespace,
    &GDBM_WRCREAT(), "D",
    "$exedom:$exeuser:$what");
       
       if ($hashref) {
    my @rolekeys=split(/\&/,$what);
   
    foreach my $key (@rolekeys) {
       delete $hashref->{$key};
    }
    if (untie(%$hashref)) {
       &Reply($client, "ok\n", $userinput);
    } else {
       &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
        "while attempting rolesdel\n", $userinput);
    }
       } else {
           &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting rolesdel\n", $userinput);
       }
       
       return 1;
   }
   &register_handler("rolesdel", \&roles_delete_handler, 1,1, 0); # Encoded client only
   
   # Unencrypted get from a user's profile database.  See 
   # GetProfileEntryEncrypted for a version that does end-to-end encryption.
   # This function retrieves a keyed item from a specific named database in the
   # user's directory.
   #
   # Parameters:
   #   $cmd             - Command request keyword (get).
   #   $tail            - Tail of the command.  This is a colon separated list
   #                      consisting of the domain and username that uniquely
   #                      identifies the profile,
   #                      The 'namespace' which selects the gdbm file to 
   #                      do the lookup in, 
   #                      & separated list of keys to lookup.  Note that
   #                      the values are returned as an & separated list too.
   #   $client          - File descriptor open on the client.
   # Returns:
   #   1       - Continue processing.
   #   0       - Exit.
   #
   sub get_profile_entry {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput= "$cmd:$tail";
      
       my ($udom,$uname,$namespace,$what) = split(/:/,$tail);
       chomp($what);
       my $hashref = &tie_user_hash($udom, $uname, $namespace,
    &GDBM_READER());
       if ($hashref) {
           my @queries=split(/\&/,$what);
           my $qresult='';
   
    for (my $i=0;$i<=$#queries;$i++) {
       $qresult.="$hashref->{$queries[$i]}&";    # Presumably failure gives empty string.
    }
    $qresult=~s/\&$//;              # Remove trailing & from last lookup.
    if (untie(%$hashref)) {
       &Reply($client, "$qresult\n", $userinput);
    } else {
       &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
       "while attempting get\n", $userinput);
    }
       } else {
    if ($!+0 == 2) {               # +0 coerces errno -> number 2 is ENOENT
       &Failure($client, "error:No such file or ".
       "GDBM reported bad block error\n", $userinput);
    } else {                        # Some other undifferentiated err.
       &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
       "while attempting get\n", $userinput);
    }
       }
       return 1;
   }
   &register_handler("get", \&get_profile_entry, 0,1,0);
   
   #
   #  Process the encrypted get request.  Note that the request is sent
   #  in clear, but the reply is encrypted.  This is a small covert channel:
   #  information about the sensitive keys is given to the snooper.  Just not
   #  information about the values of the sensitive key.  Hmm if I wanted to
   #  know these I'd snoop for the egets. Get the profile item names from them
   #  and then issue a get for them since there's no enforcement of the
   #  requirement of an encrypted get for particular profile items.  If I
   #  were re-doing this, I'd force the request to be encrypted as well as the
   #  reply.  I'd also just enforce encrypted transactions for all gets since
   #  that would prevent any covert channel snooping.
   #
   #  Parameters:
   #     $cmd               - Command keyword of request (eget).
   #     $tail              - Tail of the command.  See GetProfileEntry #                          for more information about this.
   #     $client            - File open on the client.
   #  Returns:
   #     1      - Continue processing
   #     0      - server should exit.
   sub get_profile_entry_encrypted {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = "$cmd:$tail";
      
       my ($cmd,$udom,$uname,$namespace,$what) = split(/:/,$userinput);
       chomp($what);
       my $hashref = &tie_user_hash($udom, $uname, $namespace,
    &GDBM_READER());
       if ($hashref) {
           my @queries=split(/\&/,$what);
           my $qresult='';
    for (my $i=0;$i<=$#queries;$i++) {
       $qresult.="$hashref->{$queries[$i]}&";
    }
    if (untie(%$hashref)) {
       $qresult=~s/\&$//;
       if ($cipher) {
    my $cmdlength=length($qresult);
    $qresult.="         ";
    my $encqresult='';
    for(my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {
       $encqresult.= unpack("H16", 
    $cipher->encrypt(substr($qresult,
    $encidx,
    8)));
    }
    &Reply( $client, "enc:$cmdlength:$encqresult\n", $userinput);
       } else {
    &Failure( $client, "error:no_key\n", $userinput);
       }
    } else {
       &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
       "while attempting eget\n", $userinput);
    }
       } else {
    &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting eget\n", $userinput);
       }
       
       return 1;
   }
   &register_handler("eget", \&GetProfileEntryEncrypted, 0, 1, 0);
   #
   #   Deletes a key in a user profile database.
   #   
   #   Parameters:
   #       $cmd                  - Command keyword (del).
   #       $tail                 - Command tail.  IN this case a colon
   #                               separated list containing:
   #                               The domain and user that identifies uniquely
   #                               the identity of the user.
   #                               The profile namespace (name of the profile
   #                               database file).
   #                               & separated list of keywords to delete.
   #       $client              - File open on client socket.
   # Returns:
   #     1   - Continue processing
   #     0   - Exit server.
   #
   #
   
   sub delete_profile_entry {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = "cmd:$tail";
   
       my ($udom,$uname,$namespace,$what) = split(/:/,$tail);
       chomp($what);
       my $hashref = &tie_user_hash($udom, $uname, $namespace,
    &GDBM_WRCREAT(),
    "D",$what);
       if ($hashref) {
           my @keys=split(/\&/,$what);
    foreach my $key (@keys) {
       delete($hashref->{$key});
    }
    if (untie(%$hashref)) {
       &Reply($client, "ok\n", $userinput);
    } else {
       &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
       "while attempting del\n", $userinput);
    }
       } else {
    &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting del\n", $userinput);
       }
       return 1;
   }
   &register_handler("del", \&delete_profile_entry, 0, 1, 0);
   #
   #  List the set of keys that are defined in a profile database file.
   #  A successful reply from this will contain an & separated list of
   #  the keys. 
   # Parameters:
   #     $cmd              - Command request (keys).
   #     $tail             - Remainder of the request, a colon separated
   #                         list containing domain/user that identifies the
   #                         user being queried, and the database namespace
   #                         (database filename essentially).
   #     $client           - File open on the client.
   #  Returns:
   #    1    - Continue processing.
   #    0    - Exit the server.
   #
   sub get_profile_keys {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = "$cmd:$tail";
   
       my ($udom,$uname,$namespace)=split(/:/,$tail);
       my $qresult='';
       my $hashref = &tie_user_hash($udom, $uname, $namespace,
     &GDBM_READER());
       if ($hashref) {
    foreach my $key (keys %$hashref) {
       $qresult.="$key&";
    }
    if (untie(%$hashref)) {
       $qresult=~s/\&$//;
       &Reply($client, "$qresult\n", $userinput);
    } else {
       &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
       "while attempting keys\n", $userinput);
    }
       } else {
    &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting keys\n", $userinput);
       }
      
       return 1;
   }
   &register_handler("keys", \&get_profile_keys, 0, 1, 0);
   
   #
   #   Dump the contents of a user profile database.
   #   Note that this constitutes a very large covert channel too since
   #   the dump will return sensitive information that is not encrypted.
   #   The naive security assumption is that the session negotiation ensures
   #   our client is trusted and I don't believe that's assured at present.
   #   Sure want badly to go to ssl or tls.  Of course if my peer isn't really
   #   a LonCAPA node they could have negotiated an encryption key too so >sigh<.
   # 
   #  Parameters:
   #     $cmd           - The command request keyword (currentdump).
   #     $tail          - Remainder of the request, consisting of a colon
   #                      separated list that has the domain/username and
   #                      the namespace to dump (database file).
   #     $client        - file open on the remote client.
   # Returns:
   #     1    - Continue processing.
   #     0    - Exit the server.
   #
   sub dump_profile_database {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = "$cmd:$tail";
      
       my ($udom,$uname,$namespace) = split(/:/,$tail);
       my $hashref = &tie_user_hash($udom, $uname, $namespace,
    &GDBM_READER());
       if ($hashref) {
    # Structure of %data:
    # $data{$symb}->{$parameter}=$value;
    # $data{$symb}->{'v.'.$parameter}=$version;
    # since $parameter will be unescaped, we do not
     # have to worry about silly parameter names...
   
           my $qresult='';
    my %data = ();                     # A hash of anonymous hashes..
    while (my ($key,$value) = each(%$hashref)) {
       my ($v,$symb,$param) = split(/:/,$key);
       next if ($v eq 'version' || $symb eq 'keys');
       next if (exists($data{$symb}) && 
        exists($data{$symb}->{$param}) &&
        $data{$symb}->{'v.'.$param} > $v);
       $data{$symb}->{$param}=$value;
       $data{$symb}->{'v.'.$param}=$v;
    }
    if (untie(%$hashref)) {
       while (my ($symb,$param_hash) = each(%data)) {
    while(my ($param,$value) = each (%$param_hash)){
       next if ($param =~ /^v\./);       # Ignore versions...
       #
       #   Just dump the symb=value pairs separated by &
       #
       $qresult.=$symb.':'.$param.'='.$value.'&';
    }
       }
       chop($qresult);
       &Reply($client , "$qresult\n", $userinput);
    } else {
       &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
        "while attempting currentdump\n", $userinput);
    }
       } else {
    &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting currentdump\n", $userinput);
       }
   
       return 1;
   }
   &register_handler("currentdump", \&dump_profile_database, 0, 1, 0);
   
   #
   #   Dump a profile database with an optional regular expression
   #   to match against the keys.  In this dump, no effort is made
   #   to separate symb from version information. Presumably the
   #   databases that are dumped by this command are of a different
   #   structure.  Need to look at this and improve the documentation of
   #   both this and the currentdump handler.
   # Parameters:
   #    $cmd                     - The command keyword.
   #    $tail                    - All of the characters after the $cmd:
   #                               These are expected to be a colon
   #                               separated list containing:
   #                               domain/user - identifying the user.
   #                               namespace   - identifying the database.
   #                               regexp      - optional regular expression
   #                                             that is matched against
   #                                             database keywords to do
   #                                             selective dumps.
   #   $client                   - Channel open on the client.
   # Returns:
   #    1    - Continue processing.
   # Side effects:
   #    response is written to $client.
   #
   sub dump_with_regexp {
       my ($cmd, $tail, $client) = @_;
   
   
       my $userinput = "$cmd:$tail";
   
       my ($udom,$uname,$namespace,$regexp)=split(/:/,$tail);
       if (defined($regexp)) {
    $regexp=&unescape($regexp);
       } else {
    $regexp='.';
       }
       my $hashref = &tie_user_hash($udom, $uname, $namespace,
    &GDBM_READER());
       if ($hashref) {
           my $qresult='';
    while (my ($key,$value) = each(%$hashref)) {
       if ($regexp eq '.') {
    $qresult.=$key.'='.$value.'&';
       } else {
    my $unescapeKey = &unescape($key);
    if (eval('$unescapeKey=~/$regexp/')) {
       $qresult.="$key=$value&";
    }
       }
    }
    if (untie(%$hashref)) {
       chop($qresult);
       &Reply($client, "$qresult\n", $userinput);
    } else {
       &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
        "while attempting dump\n", $userinput);
    }
       } else {
    &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting dump\n", $userinput);
       }
   
       return 1;
   }
   
   &register_handler("dump", \&dump_with_regexp, 0, 1, 0);
   
   #  Store a set of key=value pairs associated with a versioned name.
   #
   #  Parameters:
   #    $cmd                - Request command keyword.
   #    $tail               - Tail of the request.  This is a colon
   #                          separated list containing:
   #                          domain/user - User and authentication domain.
   #                          namespace   - Name of the database being modified
   #                          rid         - Resource keyword to modify.
   #                          what        - new value associated with rid.
   #
   #    $client             - Socket open on the client.
   #
   #
   #  Returns:
   #      1 (keep on processing).
   #  Side-Effects:
   #    Writes to the client
   sub store_handler {
       my ($cmd, $tail, $client) = @_;
    
       my $userinput = "$cmd:$tail";
   
       my ($udom,$uname,$namespace,$rid,$what) =split(/:/,$tail);
       if ($namespace ne 'roles') {
   
    chomp($what);
    my @pairs=split(/\&/,$what);
    my $hashref  = &tie_user_hash($udom, $uname, $namespace,
          &GDBM_WRCREAT(), "P",
          "$rid:$what");
    if ($hashref) {
       my $now = time;
       my @previouskeys=split(/&/,$hashref->{"keys:$rid"});
       my $key;
       $hashref->{"version:$rid"}++;
       my $version=$hashref->{"version:$rid"};
       my $allkeys=''; 
       foreach my $pair (@pairs) {
    my ($key,$value)=split(/=/,$pair);
    $allkeys.=$key.':';
    $hashref->{"$version:$rid:$key"}=$value;
       }
       $hashref->{"$version:$rid:timestamp"}=$now;
       $allkeys.='timestamp';
       $hashref->{"$version:keys:$rid"}=$allkeys;
       if (untie($hashref)) {
    &Reply($client, "ok\n", $userinput);
       } else {
    &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
    "while attempting store\n", $userinput);
       }
    } else {
       &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
        "while attempting store\n", $userinput);
    }
       } else {
    &Failure($client, "refused\n", $userinput);
       }
   
       return 1;
   }
   &register_handler("store", \&store_handler, 0, 1, 0);
   #
   #  Dump out all versions of a resource that has key=value pairs associated
   # with it for each version.  These resources are built up via the store
   # command.
   #
   #  Parameters:
   #     $cmd               - Command keyword.
   #     $tail              - Remainder of the request which consists of:
   #                          domain/user   - User and auth. domain.
   #                          namespace     - name of resource database.
   #                          rid           - Resource id.
   #    $client             - socket open on the client.
   #
   # Returns:
   #      1  indicating the caller should not yet exit.
   # Side-effects:
   #   Writes a reply to the client.
   #   The reply is a string of the following shape:
   #   version=current&version:keys=k1:k2...&1:k1=v1&1:k2=v2...
   #    Where the 1 above represents version 1.
   #    this continues for all pairs of keys in all versions.
   #
   #
   #    
   #
   sub restore_handler {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = "$cmd:$tail"; # Only used for logging purposes.
   
       my ($cmd,$udom,$uname,$namespace,$rid) = split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       chomp($rid);
       my $proname=&propath($udom,$uname);
       my $qresult='';
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname/$namespace.db",
       &GDBM_READER(),0640)) {
    my $version=$hash{"version:$rid"};
    $qresult.="version=$version&";
    my $scope;
    for ($scope=1;$scope<=$version;$scope++) {
       my $vkeys=$hash{"$scope:keys:$rid"};
       my @keys=split(/:/,$vkeys);
       my $key;
       $qresult.="$scope:keys=$vkeys&";
       foreach $key (@keys) {
    $qresult.="$scope:$key=".$hash{"$scope:$rid:$key"}."&";
       }                                  
    }
    if (untie(%hash)) {
       $qresult=~s/\&$//;
       &Reply( $client, "$qresult\n", $userinput);
    } else {
       &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
       "while attempting restore\n", $userinput);
    }
       } else {
    &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting restore\n", $userinput);
       }
     
       return 1;
   
   
   }
   &register_handler("restore", \&restore_handler, 0,1,0);
   
   #
   #   Add a chat message to to a discussion board.
   #
   # Parameters:
   #    $cmd                - Request keyword.
   #    $tail               - Tail of the command. A colon separated list
   #                          containing:
   #                          cdom    - Domain on which the chat board lives
   #                          cnum    - Identifier of the discussion group.
   #                          post    - Body of the posting.
   #   $client              - Socket open on the client.
   # Returns:
   #   1    - Indicating caller should keep on processing.
   #
   # Side-effects:
   #   writes a reply to the client.
   #
   #
   sub send_chat_handler {
       my ($cmd, $tail, $client) = @_;
   
       
       my $userinput = "$cmd:$tail";
   
       my ($cdom,$cnum,$newpost)=split(/\:/,$tail);
       &chat_add($cdom,$cnum,$newpost);
       &Reply($client, "ok\n", $userinput);
   
       return 1;
   }
   &register_handler("chatsend", \&send_chat_handler, 0, 1, 0);
   #
   #   Retrieve the set of chat messagss from a discussion board.
   #
   #  Parameters:
   #    $cmd             - Command keyword that initiated the request.
   #    $tail            - Remainder of the request after the command
   #                       keyword.  In this case a colon separated list of
   #                       chat domain    - Which discussion board.
   #                       chat id        - Discussion thread(?)
   #                       domain/user    - Authentication domain and username
   #                                        of the requesting person.
   #   $client           - Socket open on the client program.
   # Returns:
   #    1     - continue processing
   # Side effects:
   #    Response is written to the client.
   #
   sub retrieve_chat_handler {
       my ($cmd, $tail, $client) = @_;
   
   
       my $userinput = "$cmd:$tail";
   
       my ($cdom,$cnum,$udom,$uname)=split(/\:/,$tail);
       my $reply='';
       foreach (&get_chat($cdom,$cnum,$udom,$uname)) {
    $reply.=&escape($_).':';
       }
       $reply=~s/\:$//;
       &Reply($client, $reply."\n", $userinput);
   
   
       return 1;
   }
   &register_handler("chatretr", \&retrieve_chat_handler, 0, 1, 0);
   
   #
   #  Initiate a query of an sql database.  SQL query repsonses get put in
   #  a file for later retrieval.  This prevents sql query results from
   #  bottlenecking the system.  Note that with loncnew, perhaps this is
   #  less of an issue since multiple outstanding requests can be concurrently
   #  serviced.
   #
   #  Parameters:
   #     $cmd       - COmmand keyword that initiated the request.
   #     $tail      - Remainder of the command after the keyword.
   #                  For this function, this consists of a query and
   #                  3 arguments that are self-documentingly labelled
   #                  in the original arg1, arg2, arg3.
   #     $client    - Socket open on the client.
   # Return:
   #    1   - Indicating processing should continue.
   # Side-effects:
   #    a reply is written to $client.
   #
   sub send_query_handler {
       my ($cmd, $tail, $client) = @_;
   
   
       my $userinput = "$cmd:$tail";
   
       my ($query,$arg1,$arg2,$arg3)=split(/\:/,$tail);
       $query=~s/\n*$//g;
       &Reply($client, "". &sql_reply("$clientname\&$query".
    "\&$arg1"."\&$arg2"."\&$arg3")."\n",
     $userinput);
       
       return 1;
   }
   &register_handler("querysend", \&send_query_handler, 0, 1, 0);
   
   #
   #   Add a reply to an sql query.  SQL queries are done asyncrhonously.
   #   The query is submitted via a "querysend" transaction.
   #   There it is passed on to the lonsql daemon, queued and issued to
   #   mysql.
   #     This transaction is invoked when the sql transaction is complete
   #   it stores the query results in flie and indicates query completion.
   #   presumably local software then fetches this response... I'm guessing
   #   the sequence is: lonc does a querysend, we ask lonsql to do it.
   #   lonsql on completion of the query interacts with the lond of our
   #   client to do a query reply storing two files:
   #    - id     - The results of the query.
   #    - id.end - Indicating the transaction completed. 
   #    NOTE: id is a unique id assigned to the query and querysend time.
   # Parameters:
   #    $cmd        - Command keyword that initiated this request.
   #    $tail       - Remainder of the tail.  In this case that's a colon
   #                  separated list containing the query Id and the 
   #                  results of the query.
   #    $client     - Socket open on the client.
   # Return:
   #    1           - Indicating that we should continue processing.
   # Side effects:
   #    ok written to the client.
   #
   sub reply_query_handler {
       my ($cmd, $tail, $client) = @_;
   
   
       my $userinput = "$cmd:$tail";
   
       my ($cmd,$id,$reply)=split(/:/,$userinput); 
       my $store;
       my $execdir=$perlvar{'lonDaemons'};
       if ($store=IO::File->new(">$execdir/tmp/$id")) {
    $reply=~s/\&/\n/g;
    print $store $reply;
    close $store;
    my $store2=IO::File->new(">$execdir/tmp/$id.end");
    print $store2 "done\n";
    close $store2;
    &Reply($client, "ok\n", $userinput);
       } else {
    &Failure($client, "error: ".($!+0)
    ." IO::File->new Failed ".
    "while attempting queryreply\n", $userinput);
       }
    
   
       return 1;
   }
   &register_handler("queryreply", \&reply_query_handler, 0, 1, 0);
   
   #
   #  Process the courseidput request.  Not quite sure what this means
   #  at the system level sense.  It appears a gdbm file in the 
   #  /home/httpd/lonUsers/$domain/nohist_courseids is tied and
   #  a set of entries made in that database.
   #
   # Parameters:
   #   $cmd      - The command keyword that initiated this request.
   #   $tail     - Tail of the command.  In this case consists of a colon
   #               separated list contaning the domain to apply this to and
   #               an ampersand separated list of keyword=value pairs.
   #   $client   - Socket open on the client.
   # Returns:
   #   1    - indicating that processing should continue
   #
   # Side effects:
   #   reply is written to the client.
   #
   sub put_course_id_handler {
       my ($cmd, $tail, $client) = @_;
   
   
       my $userinput = "$cmd:$tail";
   
       my ($udom, $what) = split(/:/, $tail);
       chomp($what);
       my $now=time;
       my @pairs=split(/\&/,$what);
   
       my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT());
       if ($hashref) {
    foreach my $pair (@pairs) {
       my ($key,$value)=split(/=/,$pair);
       $hashref->{$key}=$value.':'.$now;
    }
    if (untie(%$hashref)) {
       &Reply($client, "ok\n", $userinput);
    } else {
       &Failure( $client, "error: ".($!+0)
        ." untie(GDBM) Failed ".
        "while attempting courseidput\n", $userinput);
    }
       } else {
    &Failure( $client, "error: ".($!+0)
    ." tie(GDBM) Failed ".
    "while attempting courseidput\n", $userinput);
       }
   
       return 1;
   }
   &register_handler("courseidput", \&put_course_id_handler, 0, 1, 0);
   
   #  Retrieves the value of a course id resource keyword pattern
   #  defined since a starting date.  Both the starting date and the
   #  keyword pattern are optional.  If the starting date is not supplied it
   #  is treated as the beginning of time.  If the pattern is not found,
   #  it is treatred as "." matching everything.
   #
   #  Parameters:
   #     $cmd     - Command keyword that resulted in us being dispatched.
   #     $tail    - The remainder of the command that, in this case, consists
   #                of a colon separated list of:
   #                 domain   - The domain in which the course database is 
   #                            defined.
   #                 since    - Optional parameter describing the minimum
   #                            time of definition(?) of the resources that
   #                            will match the dump.
   #                 description - regular expression that is used to filter
   #                            the dump.  Only keywords matching this regexp
   #                            will be used.
   #     $client  - The socket open on the client.
   # Returns:
   #    1     - Continue processing.
   # Side Effects:
   #   a reply is written to $client.
   sub dump_course_id_handler {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = "$cmd:$tail";
   
       my ($udom,$since,$description) =split(/:/,$tail);
       if (defined($description)) {
    $description=&unescape($description);
       } else {
    $description='.';
       }
       unless (defined($since)) { $since=0; }
       my $qresult='';
       my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT());
       if ($hashref) {
    while (my ($key,$value) = each(%$hashref)) {
       my ($descr,$lasttime,$inst_code);
       if ($value =~ m/^([^\:]*):([^\:]*):(\d+)$/) {
    ($descr,$inst_code,$lasttime)=($1,$2,$3);
       } else {
    ($descr,$lasttime) = split(/\:/,$value);
       }
       if ($lasttime<$since) { next; }
       if ($description eq '.') {
    $qresult.=$key.'='.$descr.':'.$inst_code.'&';
       } else {
    my $unescapeVal = &unescape($descr);
    if (eval('$unescapeVal=~/\Q$description\E/i')) {
       $qresult.=$key.'='.$descr.':'.$inst_code.'&';
    }
       }
    }
    if (untie(%$hashref)) {
       chop($qresult);
       &Reply($client, "$qresult\n", $userinput);
    } else {
       &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
       "while attempting courseiddump\n", $userinput);
    }
       } else {
    &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting courseiddump\n", $userinput);
       }
   
   
       return 1;
   }
   &register_handler("courseiddump", \&dump_course_id_handler, 0, 1, 0);
   
   #
   #  Puts an id to a domains id database. 
   #
   #  Parameters:
   #   $cmd     - The command that triggered us.
   #   $tail    - Remainder of the request other than the command. This is a 
   #              colon separated list containing:
   #              $domain  - The domain for which we are writing the id.
   #              $pairs  - The id info to write... this is and & separated list
   #                        of keyword=value.
   #   $client  - Socket open on the client.
   #  Returns:
   #    1   - Continue processing.
   #  Side effects:
   #     reply is written to $client.
   #
   sub put_id_handler {
       my ($cmd,$tail,$client) = @_;
   
   
       my $userinput = "$cmd:$tail";
   
       my ($udom,$what)=split(/:/,$tail);
       chomp($what);
       my @pairs=split(/\&/,$what);
       my $hashref = &tie_domain_hash($udom, "ids", &GDBM_WRCREAT(),
      "P", $what);
       if ($hashref) {
    foreach my $pair (@pairs) {
       my ($key,$value)=split(/=/,$pair);
       $hashref->{$key}=$value;
    }
    if (untie(%$hashref)) {
       &Reply($client, "ok\n", $userinput);
    } else {
       &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
        "while attempting idput\n", $userinput);
    }
       } else {
    &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
     "while attempting idput\n", $userinput);
       }
   
       return 1;
   }
   
   &register_handler("idput", \&put_id_handler, 0, 1, 0);
   #
   #  Retrieves a set of id values from the id database.
   #  Returns an & separated list of results, one for each requested id to the
   #  client.
   #
   # Parameters:
   #   $cmd       - Command keyword that caused us to be dispatched.
   #   $tail      - Tail of the command.  Consists of a colon separated:
   #               domain - the domain whose id table we dump
   #               ids      Consists of an & separated list of
   #                        id keywords whose values will be fetched.
   #                        nonexisting keywords will have an empty value.
   #   $client    - Socket open on the client.
   #
   # Returns:
   #    1 - indicating processing should continue.
   # Side effects:
   #   An & separated list of results is written to $client.
   #
   sub get_id_handler {
       my ($cmd, $tail, $client) = @_;
   
       
       my $userinput = "$client:$tail";
       
       my ($udom,$what)=split(/:/,$tail);
       chomp($what);
       my @queries=split(/\&/,$what);
       my $qresult='';
       my $hashref = &tie_domain_hash($udom, "ids", &GDBM_READER());
       if ($hashref) {
    for (my $i=0;$i<=$#queries;$i++) {
       $qresult.="$hashref->{$queries[$i]}&";
    }
    if (untie(%$hashref)) {
       $qresult=~s/\&$//;
       &Reply($client, "$qresult\n", $userinput);
    } else {
       &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
         "while attempting idget\n",$userinput);
    }
       } else {
    &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting idget\n",$userinput);
       }
       
       return 1;
   }
   
   register_handler("idget", \&get_id_handler, 0, 1, 0);
   
   #
   #  Process the tmpput command I'm not sure what this does.. Seems to
   #  create a file in the lonDaemons/tmp directory of the form $id.tmp
   # where Id is the client's ip concatenated with a sequence number.
   # The file will contain some value that is passed in.  Is this e.g.
   # a login token?
   #
   # Parameters:
   #    $cmd     - The command that got us dispatched.
   #    $tail    - The remainder of the request following $cmd:
   #               In this case this will be the contents of the file.
   #    $client  - Socket connected to the client.
   # Returns:
   #    1 indicating processing can continue.
   # Side effects:
   #   A file is created in the local filesystem.
   #   A reply is sent to the client.
   sub tmp_put_handler {
       my ($cmd, $what, $client) = @_;
   
       my $userinput = "$cmd:$what"; # Reconstruct for logging.
   
   
       my $store;
       $tmpsnum++;
       my $id=$$.'_'.$clientip.'_'.$tmpsnum;
       $id=~s/\W/\_/g;
       $what=~s/\n//g;
       my $execdir=$perlvar{'lonDaemons'};
       if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) {
    print $store $what;
    close $store;
    &Reply($client, "$id\n", $userinput);
       } else {
    &Failure( $client, "error: ".($!+0)."IO::File->new Failed ".
     "while attempting tmpput\n", $userinput);
       }
       return 1;
     
   }
   &register_handler("tmpput", \&tmp_put_handler, 0, 1, 0);
   #   Processes the tmpget command.  This command returns the contents
   #  of a temporary resource file(?) created via tmpput.
   #
   # Paramters:
   #    $cmd      - Command that got us dispatched.
   #    $id       - Tail of the command, contain the id of the resource
   #                we want to fetch.
   #    $client   - socket open on the client.
   # Return:
   #    1         - Inidcating processing can continue.
   # Side effects:
   #   A reply is sent to the client.
   
   #
   sub tmp_get_handler {
       my ($cmd, $id, $client) = @_;
   
       my $userinput = "$cmd:$id"; 
       
   
       $id=~s/\W/\_/g;
       my $store;
       my $execdir=$perlvar{'lonDaemons'};
       if ($store=IO::File->new("$execdir/tmp/$id.tmp")) {
    my $reply=<$store>;
    &Reply( $client, "$reply\n", $userinput);
    close $store;
       } else {
    &Failure( $client, "error: ".($!+0)."IO::File->new Failed ".
     "while attempting tmpget\n", $userinput);
       }
   
       return 1;
   }
   &register_handler("tmpget", \&tmp_get_handler, 0, 1, 0);
   #
   #  Process the tmpdel command.  This command deletes a temp resource
   #  created by the tmpput command.
   #
   # Parameters:
   #   $cmd      - Command that got us here.
   #   $id       - Id of the temporary resource created.
   #   $client   - socket open on the client process.
   #
   # Returns:
   #   1     - Indicating processing should continue.
   # Side Effects:
   #   A file is deleted
   #   A reply is sent to the client.
   sub tmp_del_handler {
       my ($cmd, $id, $client) = @_;
       
       my $userinput= "$cmd:$id";
       
       chomp($id);
       $id=~s/\W/\_/g;
       my $execdir=$perlvar{'lonDaemons'};
       if (unlink("$execdir/tmp/$id.tmp")) {
    &Reply($client, "ok\n", $userinput);
       } else {
    &Failure( $client, "error: ".($!+0)."Unlink tmp Failed ".
     "while attempting tmpdel\n", $userinput);
       }
       
       return 1;
   
   }
   &register_handler("tmpdel", \&tmp_del_handler, 0, 1, 0);
   #
   #
   #
   #
 #---------------------------------------------------------------  #---------------------------------------------------------------
 #  #
 #   Getting, decoding and dispatching requests:  #   Getting, decoding and dispatching requests:
Line 1887  sub get_request { Line 3386  sub get_request {
     my $input = <$client>;      my $input = <$client>;
     chomp($input);      chomp($input);
   
     Debug("get_request: Request = $input\n");      &Debug("get_request: Request = $input\n");
   
     &status('Processing '.$clientname.':'.$input);      &status('Processing '.$clientname.':'.$input);
   
Line 1987  sub process_request { Line 3486  sub process_request {
   
   
   
 # ----------------------------------------------------------------- unsubscribe  
     if ($userinput =~ /^unsub/) {  
  if(isClient) {  
     my ($cmd,$fname)=split(/:/,$userinput);  
     if (-e $fname) {  
  print $client &unsub($fname,$clientip);  
     } else {  
  print $client "not_found\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ------------------------------------------------------------------- subscribe  
     } elsif ($userinput =~ /^sub/) {  
  if(isClient) {  
     print $client &subscribe($userinput,$clientip);  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ------------------------------------------------------------- current version  
     } elsif ($userinput =~ /^currentversion/) {  
  if(isClient) {  
     my ($cmd,$fname)=split(/:/,$userinput);  
     print $client &currentversion($fname)."\n";  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ------------------------------------------------------------------------- log  
     } elsif ($userinput =~ /^log/) {  
  if(isClient) {  
     my ($cmd,$udom,$uname,$what)=split(/:/,$userinput);  
     chomp($what);  
     my $proname=propath($udom,$uname);  
     my $now=time;  
     {  
  my $hfh;  
  if ($hfh=IO::File->new(">>$proname/activity.log")) {   
     print $hfh "$now:$clientname:$what\n";  
     print $client "ok\n";   
  } else {  
     print $client "error: ".($!+0)  
  ." IO::File->new Failed "  
  ."while attempting log\n";  
  }  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ------------------------------------------------------------------------- put  
     } elsif ($userinput =~ /^put/) {  
  if(isClient) {  
     my ($cmd,$udom,$uname,$namespace,$what)  
  =split(/:/,$userinput,5);  
     $namespace=~s/\//\_/g;  
     $namespace=~s/\W//g;  
     if ($namespace ne 'roles') {  
  chomp($what);  
  my $proname=propath($udom,$uname);  
  my $now=time;  
  my @pairs=split(/\&/,$what);  
  my %hash;  
  if (tie(%hash,'GDBM_File',  
  "$proname/$namespace.db",  
  &GDBM_WRCREAT(),0640)) {  
     unless ($namespace=~/^nohist\_/) {  
  my $hfh;  
  if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { print $hfh "P:$now:$what\n"; }  
     }  
       
     foreach my $pair (@pairs) {  
  my ($key,$value)=split(/=/,$pair);  
  $hash{$key}=$value;  
     }  
     if (untie(%hash)) {  
  print $client "ok\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) failed ".  
     "while attempting put\n";  
     }  
  } else {  
     print $client "error: ".($!)  
  ." tie(GDBM) Failed ".  
  "while attempting put\n";  
  }  
     } else {  
  print $client "refused\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ------------------------------------------------------------------- inc  
     } elsif ($userinput =~ /^inc:/) {  
  if(isClient) {  
     my ($cmd,$udom,$uname,$namespace,$what)  
  =split(/:/,$userinput);  
     $namespace=~s/\//\_/g;  
     $namespace=~s/\W//g;  
     if ($namespace ne 'roles') {  
  chomp($what);  
  my $proname=propath($udom,$uname);  
  my $now=time;  
  my @pairs=split(/\&/,$what);  
  my %hash;  
  if (tie(%hash,'GDBM_File',  
  "$proname/$namespace.db",  
  &GDBM_WRCREAT(),0640)) {  
     unless ($namespace=~/^nohist\_/) {  
  my $hfh;  
  if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { print $hfh "P:$now:$what\n"; }  
     }  
     foreach my $pair (@pairs) {  
  my ($key,$value)=split(/=/,$pair);  
  # We could check that we have a number...  
  if (! defined($value) || $value eq '') {  
     $value = 1;  
  }  
  $hash{$key}+=$value;  
     }  
     if (untie(%hash)) {  
  print $client "ok\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) failed ".  
     "while attempting inc\n";  
     }  
  } else {  
     print $client "error: ".($!)  
  ." tie(GDBM) Failed ".  
  "while attempting inc\n";  
  }  
     } else {  
  print $client "refused\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # -------------------------------------------------------------------- rolesput  
     } elsif ($userinput =~ /^rolesput/) {  
  if(isClient) {  
     &Debug("rolesput");  
     if ($wasenc==1) {  
  my ($cmd,$exedom,$exeuser,$udom,$uname,$what)  
     =split(/:/,$userinput);  
  &Debug("cmd = ".$cmd." exedom= ".$exedom.  
        "user = ".$exeuser." udom=".$udom.  
        "what = ".$what);  
  my $namespace='roles';  
  chomp($what);  
  my $proname=propath($udom,$uname);  
  my $now=time;  
  my @pairs=split(/\&/,$what);  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  
     {  
  my $hfh;  
  if ($hfh=IO::File->new(">>$proname/$namespace.hist")) {   
     print $hfh "P:$now:$exedom:$exeuser:$what\n";  
  }  
     }  
       
     foreach my $pair (@pairs) {  
  my ($key,$value)=split(/=/,$pair);  
  &ManagePermissions($key, $udom, $uname,  
    &get_auth_type( $udom,   
  $uname));  
  $hash{$key}=$value;  
     }  
     if (untie(%hash)) {  
  print $client "ok\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting rolesput\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting rolesput\n";  
     }  
     } else {  
  print $client "refused\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # -------------------------------------------------------------------- rolesdel  
     } elsif ($userinput =~ /^rolesdel/) {  
  if(isClient) {  
     &Debug("rolesdel");  
     if ($wasenc==1) {  
  my ($cmd,$exedom,$exeuser,$udom,$uname,$what)  
     =split(/:/,$userinput);  
  &Debug("cmd = ".$cmd." exedom= ".$exedom.  
        "user = ".$exeuser." udom=".$udom.  
        "what = ".$what);  
  my $namespace='roles';  
  chomp($what);  
  my $proname=propath($udom,$uname);  
  my $now=time;  
  my @rolekeys=split(/\&/,$what);  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  
     {  
  my $hfh;  
  if ($hfh=IO::File->new(">>$proname/$namespace.hist")) {   
     print $hfh "D:$now:$exedom:$exeuser:$what\n";  
  }  
     }  
     foreach my $key (@rolekeys) {  
  delete $hash{$key};  
     }  
     if (untie(%hash)) {  
  print $client "ok\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting rolesdel\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting rolesdel\n";  
  }  
     } else {  
  print $client "refused\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ------------------------------------------------------------------------- get  
     } elsif ($userinput =~ /^get/) {  
  if(isClient) {  
     my ($cmd,$udom,$uname,$namespace,$what)  
  =split(/:/,$userinput);  
     $namespace=~s/\//\_/g;  
     $namespace=~s/\W//g;  
     chomp($what);  
     my @queries=split(/\&/,$what);  
     my $proname=propath($udom,$uname);  
     my $qresult='';  
     my %hash;  
     if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
  for (my $i=0;$i<=$#queries;$i++) {  
     $qresult.="$hash{$queries[$i]}&";  
  }  
  if (untie(%hash)) {  
     $qresult=~s/\&$//;  
     print $client "$qresult\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting get\n";  
  }  
     } else {  
  if ($!+0 == 2) {  
     print $client "error:No such file or ".  
  "GDBM reported bad block error\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting get\n";  
  }  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ------------------------------------------------------------------------ eget  
     } elsif ($userinput =~ /^eget/) {  
  if (isClient) {  
     my ($cmd,$udom,$uname,$namespace,$what)  
  =split(/:/,$userinput);  
     $namespace=~s/\//\_/g;  
     $namespace=~s/\W//g;  
     chomp($what);  
     my @queries=split(/\&/,$what);  
     my $proname=propath($udom,$uname);  
     my $qresult='';  
     my %hash;  
     if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
  for (my $i=0;$i<=$#queries;$i++) {  
     $qresult.="$hash{$queries[$i]}&";  
  }  
  if (untie(%hash)) {  
     $qresult=~s/\&$//;  
     if ($cipher) {  
  my $cmdlength=length($qresult);  
  $qresult.="         ";  
  my $encqresult='';  
  for   
     (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {  
  $encqresult.=  
     unpack("H16",  
    $cipher->encrypt(substr($qresult,$encidx,8)));  
     }  
  print $client "enc:$cmdlength:$encqresult\n";  
     } else {  
  print $client "error:no_key\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting eget\n";  
  }  
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting eget\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ------------------------------------------------------------------------- del  
     } elsif ($userinput =~ /^del/) {  
  if(isClient) {  
     my ($cmd,$udom,$uname,$namespace,$what)  
  =split(/:/,$userinput);  
     $namespace=~s/\//\_/g;  
     $namespace=~s/\W//g;  
     chomp($what);  
     my $proname=propath($udom,$uname);  
     my $now=time;  
     my @keys=split(/\&/,$what);  
     my %hash;  
     if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  
  unless ($namespace=~/^nohist\_/) {  
     my $hfh;  
     if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { print $hfh "D:$now:$what\n"; }  
  }  
  foreach my $key (@keys) {  
     delete($hash{$key});  
  }  
  if (untie(%hash)) {  
     print $client "ok\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting del\n";  
  }  
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting del\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ------------------------------------------------------------------------ keys  
     } elsif ($userinput =~ /^keys/) {  
  if(isClient) {  
     my ($cmd,$udom,$uname,$namespace)  
  =split(/:/,$userinput);  
     $namespace=~s/\//\_/g;  
     $namespace=~s/\W//g;  
     my $proname=propath($udom,$uname);  
     my $qresult='';  
     my %hash;  
     if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
  foreach my $key (keys %hash) {  
     $qresult.="$key&";  
  }  
  if (untie(%hash)) {  
     $qresult=~s/\&$//;  
     print $client "$qresult\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting keys\n";  
  }  
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting keys\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ----------------------------------------------------------------- dumpcurrent  
     } elsif ($userinput =~ /^currentdump/) {  
  if (isClient) {  
     my ($cmd,$udom,$uname,$namespace)  
  =split(/:/,$userinput);  
     $namespace=~s/\//\_/g;  
     $namespace=~s/\W//g;  
     my $qresult='';  
     my $proname=propath($udom,$uname);  
     my %hash;  
     if (tie(%hash,'GDBM_File',  
     "$proname/$namespace.db",  
     &GDBM_READER(),0640)) {  
     # Structure of %data:  
  # $data{$symb}->{$parameter}=$value;  
  # $data{$symb}->{'v.'.$parameter}=$version;  
  # since $parameter will be unescaped, we do not  
  # have to worry about silly parameter names...  
  my %data = ();  
  while (my ($key,$value) = each(%hash)) {  
     my ($v,$symb,$param) = split(/:/,$key);  
     next if ($v eq 'version' || $symb eq 'keys');  
     next if (exists($data{$symb}) &&   
      exists($data{$symb}->{$param}) &&  
      $data{$symb}->{'v.'.$param} > $v);  
     $data{$symb}->{$param}=$value;  
     $data{$symb}->{'v.'.$param}=$v;  
  }  
  if (untie(%hash)) {  
     while (my ($symb,$param_hash) = each(%data)) {  
  while(my ($param,$value) = each (%$param_hash)){  
     next if ($param =~ /^v\./);  
     $qresult.=$symb.':'.$param.'='.$value.'&';  
  }  
     }  
     chop($qresult);  
     print $client "$qresult\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting currentdump\n";  
  }  
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting currentdump\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
  }  
 # ------------------------------------------------------------------------ dump  
     } elsif ($userinput =~ /^dump/) {  
  if(isClient) {  
     my ($cmd,$udom,$uname,$namespace,$regexp)  
  =split(/:/,$userinput);  
     $namespace=~s/\//\_/g;  
     $namespace=~s/\W//g;  
     if (defined($regexp)) {  
  $regexp=&unescape($regexp);  
     } else {  
  $regexp='.';  
     }  
     my $qresult='';  
     my $proname=propath($udom,$uname);  
     my %hash;  
     if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
  while (my ($key,$value) = each(%hash)) {  
     if ($regexp eq '.') {  
  $qresult.=$key.'='.$value.'&';  
     } else {  
  my $unescapeKey = &unescape($key);  
  if (eval('$unescapeKey=~/$regexp/')) {  
     $qresult.="$key=$value&";  
  }  
     }  
  }  
  if (untie(%hash)) {  
     chop($qresult);  
     print $client "$qresult\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting dump\n";  
  }  
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting dump\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ----------------------------------------------------------------------- store  
     } elsif ($userinput =~ /^store/) {  
  if(isClient) {  
     my ($cmd,$udom,$uname,$namespace,$rid,$what)  
  =split(/:/,$userinput);  
     $namespace=~s/\//\_/g;  
     $namespace=~s/\W//g;  
     if ($namespace ne 'roles') {  
  chomp($what);  
  my $proname=propath($udom,$uname);  
  my $now=time;  
  my @pairs=split(/\&/,$what);  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  
     unless ($namespace=~/^nohist\_/) {  
  my $hfh;  
  if ($hfh=IO::File->new(">>$proname/$namespace.hist")) {  
     print $hfh "P:$now:$rid:$what\n";  
  }  
     }  
     my @previouskeys=split(/&/,$hash{"keys:$rid"});  
     my $key;  
     $hash{"version:$rid"}++;  
     my $version=$hash{"version:$rid"};  
     my $allkeys='';   
     foreach my $pair (@pairs) {  
  my ($key,$value)=split(/=/,$pair);  
  $allkeys.=$key.':';  
  $hash{"$version:$rid:$key"}=$value;  
     }  
     $hash{"$version:$rid:timestamp"}=$now;  
     $allkeys.='timestamp';  
     $hash{"$version:keys:$rid"}=$allkeys;  
     if (untie(%hash)) {  
  print $client "ok\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting store\n";  
  }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting store\n";  
  }  
     } else {  
  print $client "refused\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # --------------------------------------------------------------------- restore  
     } elsif ($userinput =~ /^restore/) {  
  if(isClient) {  
     my ($cmd,$udom,$uname,$namespace,$rid)  
  =split(/:/,$userinput);  
     $namespace=~s/\//\_/g;  
     $namespace=~s/\W//g;  
     chomp($rid);  
     my $proname=propath($udom,$uname);  
     my $qresult='';  
     my %hash;  
     if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
  my $version=$hash{"version:$rid"};  
  $qresult.="version=$version&";  
  my $scope;  
  for ($scope=1;$scope<=$version;$scope++) {  
     my $vkeys=$hash{"$scope:keys:$rid"};  
     my @keys=split(/:/,$vkeys);  
     my $key;  
     $qresult.="$scope:keys=$vkeys&";  
     foreach $key (@keys) {  
  $qresult.="$scope:$key=".$hash{"$scope:$rid:$key"}."&";  
     }                                    
  }  
  if (untie(%hash)) {  
     $qresult=~s/\&$//;  
     print $client "$qresult\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting restore\n";  
  }  
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting restore\n";  
     }  
  } else  {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # -------------------------------------------------------------------- chatsend  
     } elsif ($userinput =~ /^chatsend/) {  
  if(isClient) {  
     my ($cmd,$cdom,$cnum,$newpost)=split(/\:/,$userinput);  
     &chatadd($cdom,$cnum,$newpost);  
     print $client "ok\n";  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # -------------------------------------------------------------------- chatretr  
     } elsif ($userinput =~ /^chatretr/) {  
  if(isClient) {  
     my   
  ($cmd,$cdom,$cnum,$udom,$uname)=split(/\:/,$userinput);  
     my $reply='';  
     foreach (&getchat($cdom,$cnum,$udom,$uname)) {  
  $reply.=&escape($_).':';  
     }  
     $reply=~s/\:$//;  
     print $client $reply."\n";  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ------------------------------------------------------------------- querysend  
     } elsif ($userinput =~ /^querysend/) {  
  if (isClient) {  
     my ($cmd,$query,  
  $arg1,$arg2,$arg3)=split(/\:/,$userinput);  
     $query=~s/\n*$//g;  
     print $client "".  
  sqlreply("$clientname\&$query".  
  "\&$arg1"."\&$arg2"."\&$arg3")."\n";  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ------------------------------------------------------------------ queryreply  
     } elsif ($userinput =~ /^queryreply/) {  
  if(isClient) {  
     my ($cmd,$id,$reply)=split(/:/,$userinput);   
     my $store;  
     my $execdir=$perlvar{'lonDaemons'};  
     if ($store=IO::File->new(">$execdir/tmp/$id")) {  
  $reply=~s/\&/\n/g;  
  print $store $reply;  
  close $store;  
  my $store2=IO::File->new(">$execdir/tmp/$id.end");  
  print $store2 "done\n";  
  close $store2;  
  print $client "ok\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." IO::File->new Failed ".  
     "while attempting queryreply\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ----------------------------------------------------------------- courseidput  
     } elsif ($userinput =~ /^courseidput/) {  
  if(isClient) {  
     my ($cmd,$udom,$what)=split(/:/,$userinput);  
     chomp($what);  
  $udom=~s/\W//g;  
     my $proname=  
  "$perlvar{'lonUsersDir'}/$udom/nohist_courseids";  
     my $now=time;  
     my @pairs=split(/\&/,$what);  
     my %hash;  
     if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) {  
  foreach my $pair (@pairs) {  
     my ($key,$descr,$inst_code)=split(/=/,$pair);  
     $hash{$key}=$descr.':'.$inst_code.':'.$now;  
  }  
  if (untie(%hash)) {  
     print $client "ok\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting courseidput\n";  
  }  
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting courseidput\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ---------------------------------------------------------------- courseiddump  
     } elsif ($userinput =~ /^courseiddump/) {  
  if(isClient) {  
     my ($cmd,$udom,$since,$description)  
  =split(/:/,$userinput);  
     if (defined($description)) {  
  $description=&unescape($description);  
     } else {  
  $description='.';  
     }  
     unless (defined($since)) { $since=0; }  
     my $qresult='';  
     my $proname=  
  "$perlvar{'lonUsersDir'}/$udom/nohist_courseids";  
     my %hash;  
     if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) {  
  while (my ($key,$value) = each(%hash)) {  
     my ($descr,$lasttime,$inst_code);  
     if ($value =~ m/^([^\:]*):([^\:]*):(\d+)$/) {  
  ($descr,$inst_code,$lasttime)=($1,$2,$3);  
     } else {  
  ($descr,$lasttime) = split(/\:/,$value);  
     }  
     if ($lasttime<$since) { next; }  
     if ($description eq '.') {  
  $qresult.=$key.'='.$descr.':'.$inst_code.'&';  
     } else {  
  my $unescapeVal = &unescape($descr);  
  if (eval('$unescapeVal=~/\Q$description\E/i')) {  
     $qresult.=$key.'='.$descr.':'.$inst_code.'&';  
  }  
     }  
  }  
  if (untie(%hash)) {  
     chop($qresult);  
     print $client "$qresult\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting courseiddump\n";  
  }  
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting courseiddump\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ----------------------------------------------------------------------- idput  
     } elsif ($userinput =~ /^idput/) {  
  if(isClient) {  
     my ($cmd,$udom,$what)=split(/:/,$userinput);  
     chomp($what);  
     $udom=~s/\W//g;  
     my $proname="$perlvar{'lonUsersDir'}/$udom/ids";  
     my $now=time;  
     my @pairs=split(/\&/,$what);  
     my %hash;  
     if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) {  
  {  
     my $hfh;  
     if ($hfh=IO::File->new(">>$proname.hist")) {  
  print $hfh "P:$now:$what\n";  
     }  
  }  
  foreach my $pair (@pairs) {  
     my ($key,$value)=split(/=/,$pair);  
     $hash{$key}=$value;  
  }  
  if (untie(%hash)) {  
     print $client "ok\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting idput\n";  
  }  
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting idput\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ----------------------------------------------------------------------- idget  
     } elsif ($userinput =~ /^idget/) {  
  if(isClient) {  
     my ($cmd,$udom,$what)=split(/:/,$userinput);  
     chomp($what);  
     $udom=~s/\W//g;  
     my $proname="$perlvar{'lonUsersDir'}/$udom/ids";  
     my @queries=split(/\&/,$what);  
     my $qresult='';  
     my %hash;  
     if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) {  
  for (my $i=0;$i<=$#queries;$i++) {  
     $qresult.="$hash{$queries[$i]}&";  
  }  
  if (untie(%hash)) {  
     $qresult=~s/\&$//;  
     print $client "$qresult\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting idget\n";  
  }  
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting idget\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ---------------------------------------------------------------------- tmpput  
     } elsif ($userinput =~ /^tmpput/) {  
  if(isClient) {  
     my ($cmd,$what)=split(/:/,$userinput);  
     my $store;  
     $tmpsnum++;  
     my $id=$$.'_'.$clientip.'_'.$tmpsnum;  
     $id=~s/\W/\_/g;  
     $what=~s/\n//g;  
     my $execdir=$perlvar{'lonDaemons'};  
     if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) {  
  print $store $what;  
  close $store;  
  print $client "$id\n";  
     }  
     else {  
  print $client "error: ".($!+0)  
     ."IO::File->new Failed ".  
     "while attempting tmpput\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
   
 # ---------------------------------------------------------------------- tmpget  
     } elsif ($userinput =~ /^tmpget/) {  
  if(isClient) {  
     my ($cmd,$id)=split(/:/,$userinput);  
     chomp($id);  
     $id=~s/\W/\_/g;  
     my $store;  
     my $execdir=$perlvar{'lonDaemons'};  
     if ($store=IO::File->new("$execdir/tmp/$id.tmp")) {  
  my $reply=<$store>;  
     print $client "$reply\n";  
  close $store;  
     }  
     else {  
  print $client "error: ".($!+0)  
     ."IO::File->new Failed ".  
     "while attempting tmpget\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ---------------------------------------------------------------------- tmpdel  
     } elsif ($userinput =~ /^tmpdel/) {  
  if(isClient) {  
     my ($cmd,$id)=split(/:/,$userinput);  
     chomp($id);  
     $id=~s/\W/\_/g;  
     my $execdir=$perlvar{'lonDaemons'};  
     if (unlink("$execdir/tmp/$id.tmp")) {  
  print $client "ok\n";  
     } else {  
  print $client "error: ".($!+0)  
     ."Unlink tmp Failed ".  
     "while attempting tmpdel\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ----------------------------------------- portfolio directory list (portls)  
     } elsif ($userinput =~ /^portls/) {  
  if(isClient) {  
     my ($cmd,$uname,$udom)=split(/:/,$userinput);  
     my $udir=propath($udom,$uname).'/userfiles/portfolio';  
     my $dirLine='';  
     my $dirContents='';  
     if (opendir(LSDIR,$udir.'/')){  
  while ($dirLine = readdir(LSDIR)){  
     $dirContents = $dirContents.$dirLine.'<br />';  
  }  
     } else {  
  $dirContents = "No directory found\n";  
     }  
     print $client $dirContents."\n";  
  } else {  
     Reply($client, "refused\n", $userinput);  
  }  
 # -------------------------------------------------------------------------- ls  
     } elsif ($userinput =~ /^ls/) {  
  if(isClient) {  
     my $obs;  
     my $rights;  
     my ($cmd,$ulsdir)=split(/:/,$userinput);  
     my $ulsout='';  
     my $ulsfn;  
     if (-e $ulsdir) {  
  if(-d $ulsdir) {  
     if (opendir(LSDIR,$ulsdir)) {  
  while ($ulsfn=readdir(LSDIR)) {  
     undef $obs, $rights;   
     my @ulsstats=stat($ulsdir.'/'.$ulsfn);  
     #We do some obsolete checking here  
     if(-e $ulsdir.'/'.$ulsfn.".meta") {   
  open(FILE, $ulsdir.'/'.$ulsfn.".meta");  
  my @obsolete=<FILE>;  
  foreach my $obsolete (@obsolete) {  
     if($obsolete =~ m|(<obsolete>)(on)|) { $obs = 1; }   
     if($obsolete =~ m|(<copyright>)(default)|) { $rights = 1; }  
  }  
     }  
     $ulsout.=$ulsfn.'&'.join('&',@ulsstats);  
     if($obs eq '1') { $ulsout.="&1"; }  
     else { $ulsout.="&0"; }  
     if($rights eq '1') { $ulsout.="&1:"; }  
     else { $ulsout.="&0:"; }  
  }  
  closedir(LSDIR);  
     }  
  } else {  
     my @ulsstats=stat($ulsdir);  
     $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';  
  }  
     } else {  
  $ulsout='no_such_dir';  
     }  
     if ($ulsout eq '') { $ulsout='empty'; }  
     print $client "$ulsout\n";  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ----------------------------------------------------------------- setannounce  # ----------------------------------------------------------------- setannounce
     } elsif ($userinput =~ /^setannounce/) {      if ($userinput =~ /^setannounce/) {
  if (isClient) {   if (isClient) {
     my ($cmd,$announcement)=split(/:/,$userinput);      my ($cmd,$announcement)=split(/:/,$userinput);
     chomp($announcement);      chomp($announcement);
Line 2929  sub process_request { Line 3515  sub process_request {
  return 0;   return 0;
   
 # ---------------------------------- set current host/domain  # ---------------------------------- set current host/domain
     } elsif ($userinput =~ /^sethost:/) {      } elsif ($userinput =~ /^sethost/) {
  if (isClient) {   if (isClient) {
     print $client &sethost($userinput)."\n";      print $client &sethost($userinput)."\n";
  } else {   } else {
     print $client "refused\n";      print $client "refused\n";
  }   }
 #---------------------------------- request file (?) version.  #---------------------------------- request file (?) version.
     } elsif ($userinput =~/^version:/) {      } elsif ($userinput =~/^version/) {
  if (isClient) {   if (isClient) {
     print $client &version($userinput)."\n";      print $client &version($userinput)."\n";
  } else {   } else {
     print $client "refused\n";      print $client "refused\n";
  }   }
 #------------------------------- is auto-enrollment enabled?  #------------------------------- is auto-enrollment enabled?
     } elsif ($userinput =~/^autorun:/) {      } elsif ($userinput =~/^autorun/) {
  if (isClient) {   if (isClient) {
     my ($cmd,$cdom) = split(/:/,$userinput);      my ($cmd,$cdom) = split(/:/,$userinput);
     my $outcome = &localenroll::run($cdom);      my $outcome = &localenroll::run($cdom);
Line 2952  sub process_request { Line 3538  sub process_request {
     print $client "0\n";      print $client "0\n";
  }   }
 #------------------------------- get official sections (for auto-enrollment).  #------------------------------- get official sections (for auto-enrollment).
     } elsif ($userinput =~/^autogetsections:/) {      } elsif ($userinput =~/^autogetsections/) {
  if (isClient) {   if (isClient) {
     my ($cmd,$coursecode,$cdom)=split(/:/,$userinput);      my ($cmd,$coursecode,$cdom)=split(/:/,$userinput);
     my @secs = &localenroll::get_sections($coursecode,$cdom);      my @secs = &localenroll::get_sections($coursecode,$cdom);
Line 2962  sub process_request { Line 3548  sub process_request {
     print $client "refused\n";      print $client "refused\n";
  }   }
 #----------------------- validate owner of new course section (for auto-enrollment).  #----------------------- validate owner of new course section (for auto-enrollment).
     } elsif ($userinput =~/^autonewcourse:/) {      } elsif ($userinput =~/^autonewcourse/) {
  if (isClient) {   if (isClient) {
     my ($cmd,$inst_course_id,$owner,$cdom)=split(/:/,$userinput);      my ($cmd,$inst_course_id,$owner,$cdom)=split(/:/,$userinput);
     my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom);      my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom);
Line 2971  sub process_request { Line 3557  sub process_request {
     print $client "refused\n";      print $client "refused\n";
  }   }
 #-------------- validate course section in schedule of classes (for auto-enrollment).  #-------------- validate course section in schedule of classes (for auto-enrollment).
     } elsif ($userinput =~/^autovalidatecourse:/) {      } elsif ($userinput =~/^autovalidatecourse/) {
  if (isClient) {   if (isClient) {
     my ($cmd,$inst_course_id,$cdom)=split(/:/,$userinput);      my ($cmd,$inst_course_id,$cdom)=split(/:/,$userinput);
     my $outcome=&localenroll::validate_courseID($inst_course_id,$cdom);      my $outcome=&localenroll::validate_courseID($inst_course_id,$cdom);
Line 2980  sub process_request { Line 3566  sub process_request {
     print $client "refused\n";      print $client "refused\n";
  }   }
 #--------------------------- create password for new user (for auto-enrollment).  #--------------------------- create password for new user (for auto-enrollment).
     } elsif ($userinput =~/^autocreatepassword:/) {      } elsif ($userinput =~/^autocreatepassword/) {
  if (isClient) {   if (isClient) {
     my ($cmd,$authparam,$cdom)=split(/:/,$userinput);      my ($cmd,$authparam,$cdom)=split(/:/,$userinput);
     my ($create_passwd,$authchk);      my ($create_passwd,$authchk);
Line 2990  sub process_request { Line 3576  sub process_request {
     print $client "refused\n";      print $client "refused\n";
  }   }
 #---------------------------  read and remove temporary files (for auto-enrollment).  #---------------------------  read and remove temporary files (for auto-enrollment).
     } elsif ($userinput =~/^autoretrieve:/) {      } elsif ($userinput =~/^autoretrieve/) {
  if (isClient) {   if (isClient) {
     my ($cmd,$filename) = split(/:/,$userinput);      my ($cmd,$filename) = split(/:/,$userinput);
     my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename;      my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename;
Line 3016  sub process_request { Line 3602  sub process_request {
     print $client "refused\n";      print $client "refused\n";
  }   }
 #---------------------  read and retrieve institutional code format (for support form).  #---------------------  read and retrieve institutional code format (for support form).
     } elsif ($userinput =~/^autoinstcodeformat:/) {      } elsif ($userinput =~/^autoinstcodeformat/) {
  if (isClient) {   if (isClient) {
     my $reply;      my $reply;
     my($cmd,$cdom,$course) = split(/:/,$userinput);      my($cmd,$cdom,$course) = split(/:/,$userinput);
Line 3598  sub reply { Line 4184  sub reply {
   
 # -------------------------------------------------------------- Talk to lonsql  # -------------------------------------------------------------- Talk to lonsql
   
 sub sqlreply {  sub sql_reply {
     my ($cmd)=@_;      my ($cmd)=@_;
     my $answer=subsqlreply($cmd);      my $answer=&sub_sql_reply($cmd);
     if ($answer eq 'con_lost') { $answer=subsqlreply($cmd); }      if ($answer eq 'con_lost') { $answer=&sub_sql_reply($cmd); }
     return $answer;      return $answer;
 }  }
   
 sub subsqlreply {  sub sub_sql_reply {
     my ($cmd)=@_;      my ($cmd)=@_;
     my $unixsock="mysqlsock";      my $unixsock="mysqlsock";
     my $peerfile="$perlvar{'lonSockDir'}/$unixsock";      my $peerfile="$perlvar{'lonSockDir'}/$unixsock";
Line 3934  sub make_new_child { Line 4520  sub make_new_child {
 #    user      - Name of the user for which the role is being put.  #    user      - Name of the user for which the role is being put.
 #    authtype  - The authentication type associated with the user.  #    authtype  - The authentication type associated with the user.
 #  #
 sub ManagePermissions  sub manage_permissions
 {  {
   
     my ($request, $domain, $user, $authtype) = @_;      my ($request, $domain, $user, $authtype) = @_;
Line 4191  sub addline { Line 4777  sub addline {
     return $found;      return $found;
 }  }
   
 sub getchat {  sub get_chat {
     my ($cdom,$cname,$udom,$uname)=@_;      my ($cdom,$cname,$udom,$uname)=@_;
     my %hash;      my %hash;
     my $proname=&propath($cdom,$cname);      my $proname=&propath($cdom,$cname);
Line 4216  sub getchat { Line 4802  sub getchat {
     return (@participants,@entries);      return (@participants,@entries);
 }  }
   
 sub chatadd {  sub chat_add {
     my ($cdom,$cname,$newchat)=@_;      my ($cdom,$cname,$newchat)=@_;
     my %hash;      my %hash;
     my $proname=&propath($cdom,$cname);      my $proname=&propath($cdom,$cname);
Line 4775  Place in B<logs/lond.log> Line 5361  Place in B<logs/lond.log>
   
 stores hash in namespace  stores hash in namespace
   
 =item rolesput  =item rolesputy
   
 put a role into a user's environment  put a role into a user's environment
   

Removed from v.1.228  
changed lines
  Added in v.1.243


FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>