Diff for /loncom/lond between versions 1.157 and 1.178.2.18

version 1.157, 2003/10/14 10:15:27 version 1.178.2.18, 2004/04/19 11:32:35
Line 10 Line 10
 #  #
 # LON-CAPA is free software; you can redistribute it and/or modify  # LON-CAPA is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by  # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2 of the License, or  # the Free Software Foundation; either version 2 of the License, or 
 # (at your option) any later version.  # (at your option) any later version.
 #  #
 # LON-CAPA is distributed in the hope that it will be useful,  # LON-CAPA is distributed in the hope that it will be useful,
Line 20 Line 20
 #  #
 # You should have received a copy of the GNU General Public License  # You should have received a copy of the GNU General Public License
 # along with LON-CAPA; if not, write to the Free Software  # along with LON-CAPA; if not, write to the Free Software
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA  # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA    
 #  #
 # /home/httpd/html/adm/gpl.txt  # /home/httpd/html/adm/gpl.txt
 #  #
   
   
 # http://www.lon-capa.org/  # http://www.lon-capa.org/
 #  #
 # 5/26/99,6/4,6/10,6/11,6/14,6/15,6/26,6/28,6/30,  
 # 7/8,7/9,7/10,7/12,7/17,7/19,9/21,  
 # 10/7,10/8,10/9,10/11,10/13,10/15,11/4,11/16,  
 # 12/7,12/15,01/06,01/11,01/12,01/14,2/8,  
 # 03/07,05/31 Gerd Kortemeyer  
 # 06/29,06/30,07/14,07/15,07/17,07/20,07/25,09/18 Gerd Kortemeyer  
 # 12/05,12/13,12/29 Gerd Kortemeyer  
 # YEAR=2001  
 # 02/12 Gerd Kortemeyer  
 # 03/24 Gerd Kortemeyer  
 # 05/11,05/28,08/30 Gerd Kortemeyer  
 # 11/26,11/27 Gerd Kortemeyer  
 # 12/22 Gerd Kortemeyer  
 # YEAR=2002  
 # 01/20/02,02/05 Gerd Kortemeyer  
 # 02/05 Guy Albertelli  
 # 02/12 Gerd Kortemeyer  
 # 02/19 Matthew Hall  
 # 02/25 Gerd Kortemeyer  
 # 01/xx/2003 Ron Fox.. Remove preforking.  This makes the general daemon  
 #      logic simpler (and there were problems maintaining the preforked  
 #      population).  Since the time averaged connection rate is close to zero  
 #      because lonc's purpose is to maintain near continuous connnections,  
 #      preforking is not really needed.  
 # 08/xx/2003 Ron Fox:  Add management requests.  Management requests  
 #      will be validated via a call to ValidateManager. At present, this  
 #      is done by simple host verification.  In the future we can modify  
 #      this function to do a certificate check.  
 #      Management functions supported include:  
 #       - pushing /home/httpd/lonTabs/hosts.tab  
 #       - pushing /home/httpd/lonTabs/domain.tab  
 # 09/08/2003 Ron Fox:  Told lond to take care of change logging so we  
 #      don't have to remember it:  
 #  
   
   
 use strict;  use strict;
 use lib '/home/httpd/lib/perl/';  use lib '/home/httpd/lib/perl/';
Line 79  use Authen::Krb5; Line 46  use Authen::Krb5;
 use lib '/home/httpd/lib/perl/';  use lib '/home/httpd/lib/perl/';
 use localauth;  use localauth;
 use File::Copy;  use File::Copy;
   use LONCAPA::ConfigFileEdit;
   
 my $DEBUG = 0;       # Non zero to enable debug log entries.  my $DEBUG = 1;       # Non zero to enable debug log entries.
   
 my $status='';  my $status='';
 my $lastlog='';  my $lastlog='';
Line 92  my $currentdomainid; Line 60  my $currentdomainid;
   
 my $client;  my $client;
 my $clientip;  my $clientip;
   my $clientname;
   
   my $cipher; # Cipher key negotiated with client.
   my $tmpsnum = 0;; # Id of tmpputs.
   
 my $server;  my $server;
 my $thisserver;  my $thisserver;
   
   # 
   #   Connection type is:
   #      client                   - All client actions are allowed
   #      manager                  - only management functions allowed.
   #      both                     - Both management and client actions are allowed
   #
   
   my $ConnectionType;
   
 my %hostid;  my %hostid;
 my %hostdom;  my %hostdom;
 my %hostip;  my %hostip;
 my %managers; # If defined $managers{hostname} is a manager  
   my %managers; # Ip -> manager names
   
 my %perlvar; # Will have the apache conf defined perl vars.  my %perlvar; # Will have the apache conf defined perl vars.
   
 #  #
   #   The hash below is used for command dispatching, and is therefore keyed on the request keyword.
   #    Each element of the hash contains a reference to an array that contains:
   #          A reference to a sub that executes the request corresponding to the keyword.
   #          A flag that is true if the request must be encoded to be acceptable.
   #          A mask with bits as follows:
   #                      CLIENT_OK    - Set when the function is allowed by ordinary clients
   #                      MANAGER_OK   - Set when the function is allowed to manager clients.
   #
   my $CLIENT_OK  = 1;
   my $MANAGER_OK = 2;
   my %Dispatcher;
   
   #
 #  The array below are password error strings."  #  The array below are password error strings."
 #  #
 my $lastpwderror    = 13; # Largest error number from lcpasswd.  my $lastpwderror    = 13; # Largest error number from lcpasswd.
Line 139  my @adderrors    = ("ok", Line 135  my @adderrors    = ("ok",
     "lcuseradd Could not add user.",      "lcuseradd Could not add user.",
     "lcuseradd Password mismatch");      "lcuseradd Password mismatch");
   
   #
   #   Statistics that are maintained and dislayed in the status line.
   #
   my $Transactions; # Number of attempted transactions.
   my $Failures; # Number of transcations failed.
   
   #   ResetStatistics: 
   #      Resets the statistics counters:
   #
   sub ResetStatistics {
       $Transactions = 0;
       $Failures     = 0;
   }
   
   #
   #   Return true if client is a manager.
   #
   sub isManager {
       return (($ConnectionType eq "manager") || ($ConnectionType eq "both"));
   }
   #
   #   Return tru if client can do client functions
   #
   sub isClient {
       return (($ConnectionType eq "client") || ($ConnectionType eq "both"));
   }
   #
   #  Ties a domain level resource file to a hash.
   #  If requested a history entry is created in the associated hist file.
   #
   #  Parameters:
   #     domain    - Name of the domain in which the resource file lives.
   #     namespace - Name of the hash within that domain.
   #     how       - How to tie the hash (e.g. GDBM_WRCREAT()).
   #     loghead   - Optional parameter, if present a log entry is created
   #                 in the associated history file and this is the first part
   #                  of that entry.
   #     logtail   - Goes along with loghead,  The actual logentry is of the
   #                 form $loghead:<timestamp>:logtail.
   # Returns:
   #    Reference to a hash bound to the db file or alternatively undef
   #    if the tie failed.
   #
   sub TieDomainHash {
       my $domain    = shift;
       my $namespace = shift;
       my $how       = shift;
       
       # Filter out any whitespace in the domain name:
       
       $domain =~ s/\W//g;
       
       # We have enough to go on to tie the hash:
       
       my $UserTopDir   = $perlvar{'lonUsersDir'};
       my $DomainDir    = $UserTopDir."/$domain";
       my $ResourceFile = $DomainDir."/$namespace.db";
       my %hash;
       if(tie(%hash, 'GDBM_File', $ResourceFile, $how, 0640)) {
    if (scalar @_) { # Need to log the operation.
       my $logFh = IO::File->new(">>$DomainDir/$namespace.hist");
       if($logFh) {
    my $TimeStamp = time;
    my ($loghead, $logtail) = @_;
    print $logFh "$loghead:$TimeStamp:$logtail\n";
       }
    }
    return \%hash; # Return the tied hash.
       }
       else {
    return undef; # Tie failed.
       }
   }
   
   #
   #   Ties a user's resource file to a hash.  
   #   If necessary, an appropriate history
   #   log file entry is made as well.
   #   This sub factors out common code from the subs that manipulate
   #   the various gdbm files that keep keyword value pairs.
   # Parameters:
   #   domain       - Name of the domain the user is in.
   #   user         - Name of the 'current user'.
   #   namespace    - Namespace representing the file to tie.
   #   how          - What the tie is done to (e.g. GDBM_WRCREAT().
   #   loghead      - Optional first part of log entry if there may be a
   #                  history file.
   #   what         - Optional tail of log entry if there may be a history
   #                  file.
   # Returns:
   #   hash to which the database is tied.  It's up to the caller to untie.
   #   undef if the has could not be tied.
   #
   sub TieUserHash {
       my $domain      = shift;
       my $user        = shift;
       my $namespace   = shift;
       my $how         = shift;
       
       $namespace=~s/\//\_/g; # / -> _
       $namespace=~s/\W//g; # whitespace eliminated.
       my $proname     = propath($domain, $user);
      
       # If this is a namespace for which a history is kept,
       # make the history log entry:
       
       
       unless ($namespace =~/^nohist\_/ && (scalar @_ > 0)) {
    my $hfh = IO::File->new(">>$proname/$namespace.hist"); 
    if($hfh) {
       my $now = time;
       my $loghead  = shift;
       my $what    = shift;
       print $hfh "$loghead:$now:$what\n";
    }
       }
       #  Tie the database.
       
       my %hash;
       if(tie(%hash, 'GDBM_File', "$proname/$namespace.db",
      $how, 0640)) {
    return \%hash;
       }
       else {
    return undef;
       }
       
   }
   
   #
   #   Get a Request:
   #   Gets a Request message from the client.  The transaction
   #   is defined as a 'line' of text.  We remove the new line
   #   from the text line.  
   #   
   sub GetRequest {
       my $input = <$client>;
       chomp($input);
   
       Debug("Request = $input\n");
   
       &status('Processing '.$clientname.':'.$input);
   
       return $input;
   }
   #
   #   Decipher encoded traffic
   #  Parameters:
   #     input      - Encoded data.
   #  Returns:
   #     Decoded data or undef if encryption key was not yet negotiated.
   #  Implicit input:
   #     cipher  - This global holds the negotiated encryption key.
   #
   sub Decipher {
       my $input  = shift;
       my $output = '';
      
      
       if($cipher) {
    my($enc, $enclength, $encinput) = split(/:/, $input);
    for(my $encidx = 0; $encidx < length($encinput); $encidx += 16) {
       $output .= 
    $cipher->decrypt(pack("H16", substr($encinput, $encidx, 16)));
    }
    return substr($output, 0, $enclength);
       } else {
    return undef;
       }
   }
   
   #
   #   Register a command processor.  This function is invoked to register a sub
   #   to process a request.  Once registered, the ProcessRequest sub can automatically
   #   dispatch requests to an appropriate sub, and do the top level validity checking
   #   as well:
   #    - Is the keyword recognized.
   #    - Is the proper client type attempting the request.
   #    - Is the request encrypted if it has to be.
   #   Parameters:
   #    $RequestName         - Name of the request being registered.
   #                           This is the command request that will match
   #                           against the hash keywords to lookup the information
   #                           associated with the dispatch information.
   #    $Procedure           - Reference to a sub to call to process the request.
   #                           All subs get called as follows:
   #                             Procedure($cmd, $tail, $replyfd, $key)
   #                             $cmd    - the actual keyword that invoked us.
   #                             $tail   - the tail of the request that invoked us.
   #                             $replyfd- File descriptor connected to the client
   #    $MustEncode          - True if the request must be encoded to be good.
   #    $ClientOk            - True if it's ok for a client to request this.
   #    $ManagerOk           - True if it's ok for a manager to request this.
   # Side effects:
   #      - On success, the Dispatcher hash has an entry added for the key $RequestName
   #      - On failure, the program will die as it's a bad internal bug to try to 
   #        register a duplicate command handler.
   #
   sub RegisterHandler {
       my $RequestName    = shift;
       my $Procedure      = shift;
       my $MustEncode     = shift;
       my $ClientOk       = shift;
       my $ManagerOk      = shift;
      
       #  Don't allow duplication#
      
       if (defined $Dispatcher{$RequestName}) {
    die "Attempting to define a duplicate request handler for $RequestName\n";
       }
       #   Build the client type mask:
       
       my $ClientTypeMask = 0;
       if($ClientOk) {
    $ClientTypeMask  |= $CLIENT_OK;
       }
       if($ManagerOk) {
    $ClientTypeMask  |= $MANAGER_OK;
       }
      
       #  Enter the hash:
         
       my @entry = ($Procedure, $MustEncode, $ClientTypeMask);
      
       $Dispatcher{$RequestName} = \@entry;
      
      
   }
   
   #--------------------- Request Handlers --------------------------------------------
   #
   #   By convention each request handler registers itself prior to the sub declaration:
   #
   
   #  Handles ping requests.
   #  Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $replyfd- File descriptor connected to the client
   #  Implicit Inputs:
   #      $currenthostid - Global variable that carries the name of the host we are
   #                       known as.
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit.
   #  Side effects:
   #      Reply information is sent to the client.
   
   sub PingHandler {
       my $cmd    = shift;
       my $tail   = shift;
       my $client = shift;
      
       Reply( $client,"$currenthostid\n","$cmd:$tail");
      
       return 1;
   }
   RegisterHandler("ping", \&PingHandler, 0, 1, 1);       # Ping unencoded, client or manager.
   #
   # Handles pong reequests:
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $replyfd- File descriptor connected to the client
   #  Implicit Inputs:
   #      $currenthostid - Global variable that carries the name of the host we are
   #                       connected to.
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit.
   #  Side effects:
   #      Reply information is sent to the client.
   
   sub PongHandler {
       my $cmd     = shift;
       my $tail    = shift;
       my $replyfd = shift;
   
       my $reply=&reply("ping",$clientname);
       Reply( $replyfd, "$currenthostid:$reply\n", "$cmd:$tail"); 
       return 1;
   }
   RegisterHandler("pong", \&PongHandler, 0, 1, 1);       # Pong unencoded, client or manager
   
   #
   #   EstablishKeyHandler:
   #      Called to establish an encrypted session key with the remote client.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $replyfd- File descriptor connected to the client
   #  Implicit Inputs:
   #      $currenthostid - Global variable that carries the name of the host
   #                       known as.
   #      $clientname    - Global variable that carries the name of the hsot we're connected to.
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit.
   #  Implicit Outputs:
   #      Reply information is sent to the client.
   #      $cipher is set with a reference to a new IDEA encryption object.
   #
   sub EstablishKeyHandler {
       my $cmd      = shift;
       my $tail     = shift;
       my $replyfd  = shift;
   
       my $buildkey=time.$$.int(rand 100000);
       $buildkey=~tr/1-6/A-F/;
       $buildkey=int(rand 100000).$buildkey.int(rand 100000);
       my $key=$currenthostid.$clientname;
       $key=~tr/a-z/A-Z/;
       $key=~tr/G-P/0-9/;
       $key=~tr/Q-Z/0-9/;
       $key=$key.$buildkey.$key.$buildkey.$key.$buildkey;
       $key=substr($key,0,32);
       my $cipherkey=pack("H32",$key);
       $cipher=new IDEA $cipherkey;
       Reply($replyfd, "$buildkey\n", "$cmd:$tail"); 
      
       return 1;
   
   }
   RegisterHandler("ekey", \&EstablishKeyHandler, 0, 1,1);
   
   #  LoadHandler:
   #     Handler for the load command.  Returns the current system load average
   #     to the requestor.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $replyfd- File descriptor connected to the client
   #  Implicit Inputs:
   #      $currenthostid - Global variable that carries the name of the host
   #                       known as.
   #      $clientname    - Global variable that carries the name of the hsot we're connected to.
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit.
   #  Side effects:
   #      Reply information is sent to the client.
   sub LoadHandler {
       my $cmd     = shift;
       my $tail    = shift;
       my $replyfd = shift;
   
      # Get the load average from /proc/loadavg and calculate it as a percentage of
      # the allowed load limit as set by the perl global variable lonLoadLim
   
       my $loadavg;
       my $loadfile=IO::File->new('/proc/loadavg');
      
       $loadavg=<$loadfile>;
       $loadavg =~ s/\s.*//g;                      # Extract the first field only.
      
       my $loadpercent=100*$loadavg/$perlvar{'lonLoadLim'};
   
       Reply( $replyfd, "$loadpercent\n", "$cmd:$tail");
      
       return 1;
   }
   RegisterHandler("load", \&LoadHandler, 0, 1, 0);
   
   
   #
   #   Process the userload request.  This sub returns to the client the current
   #  user load average.  It can be invoked either by clients or managers.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $replyfd- File descriptor connected to the client
   #  Implicit Inputs:
   #      $currenthostid - Global variable that carries the name of the host
   #                       known as.
   #      $clientname    - Global variable that carries the name of the hsot we're connected to.
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit
   # Implicit inputs:
   #     whatever the userload() function requires.
   #  Implicit outputs:
   #     the reply is written to the client.
   #
   sub UserLoadHandler {
       my $cmd     = shift;
       my $tail    = shift;
       my $replyfd = shift;
   
       my $userloadpercent=&userload();
       Reply($replyfd, "$userloadpercent\n", "$cmd:$tail");
       
       return 1;
   }
   RegisterHandler("userload", \&UserLoadHandler, 0, 1, 0);
   
   #   Process a request for the authorization type of a user:
   #   (userauth).
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $replyfd- File descriptor connected to the client
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit
   # Implicit outputs:
   #    The user authorization type is written to the client.
   #
   sub UserAuthorizationType {
       my $cmd     = shift;
       my $tail    = shift;
       my $replyfd = shift;
      
       my $userinput = "$cmd:$tail";
      
       #  Pull the domain and username out of the command tail.
       # and call GetAuthType to determine the authentication type.
      
       my ($udom,$uname)=split(/:/,$tail);
       my $result = GetAuthType($udom, $uname);
       if($result eq "nouser") {
    Failure( $replyfd, "unknown_user\n", $userinput);
       } else {
    #
    # We only want to pass the second field from GetAuthType
    # for ^krb.. otherwise we'll be handing out the encrypted
    # password for internals e.g.
    #
    my ($type,$otherinfo) = split(/:/,$result);
    if($type =~ /^krb/) {
       $type = $result;
    }
    Reply( $replyfd, "$type\n", $userinput);
       }
     
       return 1;
   }
   RegisterHandler("currentauth", \&UserAuthorizationType, 1, 1, 0);
   #
   #   Process a request by a manager to push a hosts or domain table 
   #   to us.  We pick apart the command and pass it on to the subs
   #   that already exist to do this.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $client - File descriptor connected to the client
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit
   # Implicit Output:
   #    a reply is written to the client.
   
   sub PushFileHandler {
       my $cmd    = shift;
       my $tail   = shift;
       my $client = shift;
   
       my $userinput = "$cmd:$tail";
   
       # At this time we only know that the IP of our partner is a valid manager
       # the code below is a hook to do further authentication (e.g. to resolve
       # spoofing).
   
       my $cert = GetCertificate($userinput);
       if(ValidManager($cert)) { 
   
    # Now presumably we have the bona fides of both the peer host and the
    # process making the request.
         
    my $reply = PushFile($userinput);
    Reply($client, "$reply\n", $userinput);
   
       } else {
    Failure( $client, "refused\n", $userinput);
       } 
   }
   RegisterHandler("pushfile", \&PushFileHandler, 1, 0, 1);
   
   
   
   #   Process a reinit request.  Reinit requests that either
   #   lonc or lond be reinitialized so that an updated 
   #   host.tab or domain.tab can be processed.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $client - File descriptor connected to the client
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit
   #  Implicit output:
   #     a reply is sent to the client.
   #
   sub ReinitProcessHandler {
       my $cmd    = shift;
       my $tail   = shift;
       my $client = shift;
      
       my $userinput = "$cmd:$tail";
      
       my $cert = GetCertificate($userinput);
       if(ValidManager($cert)) {
    chomp($userinput);
    my $reply = ReinitProcess($userinput);
    Reply( $client,  "$reply\n", $userinput);
       } else {
    Failure( $client, "refused\n", $userinput);
       }
       return 1;
   }
   
   RegisterHandler("reinit", \&ReinitProcessHandler, 1, 0, 1);
   
   #  Process the editing script for a table edit operation.
   #  the editing operation must be encrypted and requested by
   #  a manager host.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $client - File descriptor connected to the client
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit
   #  Implicit output:
   #     a reply is sent to the client.
   #
   sub EditTableHandler {
       my $command    = shift;
       my $tail       = shift;
       my $client     = shift;
      
       my $userinput = "$command:$tail";
   
       my $cert = GetCertificate($userinput);
       if(ValidManager($cert)) {
    my($filetype, $script) = split(/:/, $tail);
    if (($filetype eq "hosts") || 
       ($filetype eq "domain")) {
       if($script ne "") {
    Reply($client,              # BUGBUG - EditFile
         EditFile($userinput), #   could fail.
         $userinput);
       } else {
    Failure($client,"refused\n",$userinput);
       }
    } else {
       Failure($client,"refused\n",$userinput);
    }
       } else {
    Failure($client,"refused\n",$userinput);
       }
       return 1;
   }
   RegisterHandler("edit", \&EditTableHandler, 1, 0, 1);
   
   
   #
   #   Authenticate a user against the LonCAPA authentication
   #   database.  Note that there are several authentication
   #   possibilities:
   #   - unix     - The user can be authenticated against the unix
   #                password file.
   #   - internal - The user can be authenticated against a purely 
   #                internal per user password file.
   #   - kerberos - The user can be authenticated against either a kerb4 or kerb5
   #                ticket granting authority.
   #   - user     - The person tailoring LonCAPA can supply a user authentication
   #                mechanism that is per system.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   #
   sub AuthenticateHandler {
       my $cmd        = shift;
       my $tail       = shift;
       my $client     = shift;
       
       #  Regenerate the full input line 
       
       my $userinput  = $cmd.":".$tail;
       
       #  udom    - User's domain.
       #  uname   - Username.
       #  upass   - User's password.
       
       my ($udom,$uname,$upass)=split(/:/,$tail);
       Debug(" Authenticate domain = $udom, user = $uname, password = $upass");
       chomp($upass);
       $upass=unescape($upass);
   
       my $pwdcorrect = ValidateUser($udom, $uname, $upass);
       if($pwdcorrect) {
    Reply( $client, "authorized\n", $userinput);
    #
    #  Bad credentials: Failed to authorize
    #
       } else {
    Failure( $client, "non_authorized\n", $userinput);
       }
   
       return 1;
   }
   RegisterHandler("auth", \&AuthenticateHandler, 1, 1, 0);
   
   #
   #   Change a user's password.  Note that this function is complicated by
   #   the fact that a user may be authenticated in more than one way:
   #   At present, we are not able to change the password for all types of
   #   authentication methods.  Only for:
   #      unix    - unix password or shadow passoword style authentication.
   #      local   - Locally written authentication mechanism.
   #   For now, kerb4 and kerb5 password changes are not supported and result
   #   in an error.
   # FUTURE WORK:
   #    Support kerberos passwd changes?
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   sub ChangePasswordHandler {
       my $cmd     = shift;
       my $tail    = shift;
       my $client  = shift;
      
       my $userinput = $cmd.":".$tail;           # Reconstruct client's string.
   
       #
       #  udom  - user's domain.
       #  uname - Username.
       #  upass - Current password.
       #  npass - New password.
      
       my ($udom,$uname,$upass,$npass)=split(/:/,$tail);
       chomp($npass);
       $upass=&unescape($upass);
       $npass=&unescape($npass);
       &Debug("Trying to change password for $uname");
   
       # First require that the user can be authenticated with their
       # old password:
   
       my $validated = ValidateUser($udom, $uname, $upass);
       if($validated) {
    my $realpasswd  = GetAuthType($udom, $uname); # Defined since authd.
   
    my ($howpwd,$contentpwd)=split(/:/,$realpasswd);
    if ($howpwd eq 'internal') {
       &Debug("internal auth");
       my $salt=time;
       $salt=substr($salt,6,2);
       my $ncpass=crypt($npass,$salt);
       if(RewritePwFile($udom, $uname, "internal:$ncpass")) {
    &logthis("Result of password change for "
    ."$uname: pwchange_success");
    Reply($client, "ok\n", $userinput);
       } else {
    &logthis("Unable to open $uname passwd "               
    ."to change password");
    Failure( $client, "non_authorized\n",$userinput);
       }
    } elsif ($howpwd eq 'unix') {
       # Unix means we have to access /etc/password
       &Debug("auth is unix");
       my $execdir=$perlvar{'lonDaemons'};
       &Debug("Opening lcpasswd pipeline");
       my $pf = IO::File->new("|$execdir/lcpasswd > "
      ."$perlvar{'lonDaemons'}"
      ."/logs/lcpasswd.log");
       print $pf "$uname\n$npass\n$npass\n";
       close $pf;
       my $err = $?;
       my $result = ($err>0 ? 'pwchange_failure' : 'ok');
       &logthis("Result of password change for $uname: ".
        &lcpasswdstrerror($?));
       Reply($client, "$result\n", $userinput);
    } else {
       # this just means that the current password mode is not
       # one we know how to change (e.g the kerberos auth modes or
       # locally written auth handler).
       #
       Reply( $client, "auth_mode_error\n", $userinput);
    }  
   
       }
       else {
    Reply( $client, "non_authorized\n", $userinput);
       }
   
       return 1;
   }
   RegisterHandler("passwd", \&ChangePasswordHandler, 1, 1, 0);
   
   #
   #   Create a new user.  User in this case means a lon-capa user.
   #   The user must either already exist in some authentication realm
   #   like kerberos or the /etc/passwd.  If not, a user completely local to
   #   this loncapa system is created.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   sub AddUserHandler {
       my $cmd     = shift;
       my $tail    = shift;
       my $client  = shift;
   
       my ($udom,$uname,$umode,$npass)=split(/:/,$tail);
       my $userinput = $cmd.":".$tail; # Reconstruct the full request line.
   
       &Debug("cmd =".$cmd." $udom =".$udom." uname=".$uname);
   
   
       if($udom eq $currentdomainid) { # Reject new users for other domains...
   
    my $oldumask=umask(0077);
    chomp($npass);
    $npass=&unescape($npass);
    my $passfilename  = PasswordPath($udom, $uname);
    &Debug("Password file created will be:".$passfilename);
    if (-e $passfilename) {
       Failure( $client, "already_exists\n", $userinput);
    } else {
       my @fpparts=split(/\//,$passfilename);
       my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2];
       my $fperror='';
       for (my $i=3;$i<= ($#fpparts-1);$i++) {
    $fpnow.='/'.$fpparts[$i]; 
    unless (-e $fpnow) {
       &logthis("mkdir $fpnow");
       unless (mkdir($fpnow,0777)) {
    $fperror="error: ".($!+0)." mkdir failed while attempting "
       ."makeuser";
       }
    }
       }
       unless ($fperror) {
    my $result=&make_passwd_file($uname, $umode,$npass, $passfilename);
    Reply($client, $result, $userinput);     #BUGBUG - could be fail
       } else {
    Failure($client, "$fperror\n", $userinput);
       }
    }
    umask($oldumask);
       }  else {
    Failure($client, "not_right_domain\n",
    $userinput); # Even if we are multihomed.
       
       }
       return 1;
   
   }
   RegisterHandler("makeuser", \&AddUserHandler, 1, 1, 0);
   
   #
   #   Change the authentication method of a user.  Note that this may
   #   also implicitly change the user's password if, for example, the user is
   #   joining an existing authentication realm.  Known authentication realms at
   #   this time are:
   #    internal   - Purely internal password file (only loncapa knows this user)
   #    local      - Institutionally written authentication module.
   #    unix       - Unix user (/etc/passwd with or without /etc/shadow).
   #    kerb4      - kerberos version 4
   #    kerb5      - kerberos version 5
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   #
   sub ChangeAuthenticationHandler {
       my $cmd     = shift;
       my $tail    = shift;
       my $client  = shift;
      
       my $userinput  = "$cmd:$tail";              # Reconstruct user input.
   
       my ($udom,$uname,$umode,$npass)=split(/:/,$tail);
       &Debug("cmd = ".$cmd." domain= ".$udom."uname =".$uname." umode= ".$umode);
       if ($udom ne $currentdomainid) {
    Failure( $client, "not_right_domain\n", $client);
       } else {
   
    chomp($npass);
   
    $npass=&unescape($npass);
    my $passfilename = PasswordPath($udom, $uname);
    if ($passfilename) { # Not allowed to create a new user!!
       my $result=&make_passwd_file($uname, $umode,$npass,$passfilename);
       Reply($client, $result, $userinput);
    } else {       
       Failure($client, "non_authorized", $userinput); # Fail the user now.
    }
       }
       return 1;
   }
   RegisterHandler("changeuserauth", \&ChangeAuthenticationHandler, 1,1, 0);
   
   #
   #   Determines if this is the home server for a user.  The home server
   #   for a user will have his/her lon-capa passwd file.  Therefore all we need
   #   to do is determine if this file exists.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   #
   sub IsHomeHandler {
       my $cmd     = shift;
       my $tail    = shift;
       my $client  = shift;
      
       my $userinput  = "$cmd:$tail";
      
       my ($udom,$uname)=split(/:/,$tail);
       chomp($uname);
       my $passfile = PasswordFilename($udom, $uname);
       if($passfile) {
    Reply( $client, "found\n", $userinput);
       } else {
    Failure($client, "not_found\n", $userinput);
       }
       return 1;
   }
   RegisterHandler("home", \&IsHomeHandler, 0,1,0);
   #
   #   Process an update request for a resource?? I think what's going on here is
   #   that a resource has been modified that we hold a subscription to.
   #   If the resource is not local, then we must update, or at least invalidate our
   #   cached copy of the resource. 
   #   FUTURE WORK:
   #      I need to look at this logic carefully.  My druthers would be to follow
   #      typical caching logic, and simple invalidate the cache, drop any subscription
   #      an let the next fetch start the ball rolling again... however that may
   #      actually be more difficult than it looks given the complex web of
   #      proxy servers.
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   #
   sub UpdateResourceHandler {
       my $cmd    = shift;
       my $tail   = shift;
       my $client = shift;
      
       my $userinput = "$cmd:$tail";
      
       my $fname=$tail;
       my $ownership=ishome($fname);
       if ($ownership eq 'not_owner') {
    if (-e $fname) {
       my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size,
    $atime,$mtime,$ctime,$blksize,$blocks)=stat($fname);
       my $now=time;
       my $since=$now-$atime;
       if ($since>$perlvar{'lonExpire'}) {
    my $reply=&reply("unsub:$fname","$clientname");
    unlink("$fname");
       } else {
    my $transname="$fname.in.transfer";
    my $remoteurl=&reply("sub:$fname","$clientname");
    my $response;
    alarm(120);
    {
       my $ua=new LWP::UserAgent;
       my $request=new HTTP::Request('GET',"$remoteurl");
       $response=$ua->request($request,$transname);
    }
    alarm(0);
    if ($response->is_error()) {
       unlink($transname);
       my $message=$response->status_line;
       &logthis("LWP GET: $message for $fname ($remoteurl)");
    } else {
       if ($remoteurl!~/\.meta$/) {
    alarm(120);
    {
       my $ua=new LWP::UserAgent;
       my $mrequest=new HTTP::Request('GET',$remoteurl.'.meta');
       my $mresponse=$ua->request($mrequest,$fname.'.meta');
       if ($mresponse->is_error()) {
    unlink($fname.'.meta');
       }
    }
    alarm(0);
       }
       rename($transname,$fname);
    }
       }
       Reply( $client, "ok\n", $userinput);
    } else {
       Failure($client, "not_found\n", $userinput);
    }
       } else {
    Failure($client, "rejected\n", $userinput);
       }
       return 1;
   }
   RegisterHandler("update", \&UpdateResourceHandler, 0 ,1, 0);
   
   #
   #   Fetch a user file from a remote server:
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub FetchUserFileHandler {
       my $cmd     = shift;
       my $tail    = shift;
       my $client  = shift;
      
       my $userinput = "$cmd:$tail";
       my $fname           = $tail;
       my ($udom,$uname,$ufile)=split(/\//,$fname);
       my $udir=propath($udom,$uname).'/userfiles';
       unless (-e $udir) {
    mkdir($udir,0770); 
       }
       if (-e $udir) {
    $ufile=~s/^[\.\~]+//;
    $ufile=~s/\///g;
    my $destname=$udir.'/'.$ufile;
    my $transname=$udir.'/'.$ufile.'.in.transit';
    my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;
    my $response;
    alarm(120);
    {
       my $ua=new LWP::UserAgent;
       my $request=new HTTP::Request('GET',"$remoteurl");
       $response=$ua->request($request,$transname);
    }
    alarm(0);
    if ($response->is_error()) {
       unlink($transname);
       my $message=$response->status_line;
       &logthis("LWP GET: $message for $fname ($remoteurl)");
       Failure($client, "failed\n", $userinput);
    } else {
       if (!rename($transname,$destname)) {
    &logthis("Unable to move $transname to $destname");
    unlink($transname);
    Failure($client, "failed\n", $userinput);
       } else {
    Reply($client, "ok\n", $userinput);
       }
    }   
       } else {
    Failure($client, "not_home\n", $userinput);
       }
       return 1;
   }
   RegisterHandler("fetchuserfile", \&FetchUserFileHandler, 0, 1, 0);
   #
   #   Authenticate access to a user file. 
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   sub AuthenticateUserFileAccess {
       my $cmd       = shift;
       my $tail      = shift;
       my $client    = shift;
       my $userinput = "$cmd:$tail";
   
       my ($fname,$session)=split(/:/,$tail);
       chomp($session);
       my $reply='non_auth';
       if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'.$session.'.id')) {
    while (my $line=<ENVIN>) {
       if ($line=~/userfile\.$fname\=/) { 
    $reply='ok'; 
       }
    }
    close(ENVIN);
    Reply($client, $reply."\n", $userinput);
       } else {
    Failure($client, "invalid_token\n", $userinput);
       }
       return 1;
      
   }
   RegisterHandler("tokenauthuserfile", \&AuthenticateUserFileAccess, 0, 1, 0);
   #
   #   Unsubscribe from a resource.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub UnsubscribeHandler {
       my $cmd      = shift;
       my $tail     = shift;
       my $client   = shift;
       my $userinput= "$cmd:$tail";
       
       my $fname = $tail;
       if (-e $fname) {
    Reply($client, &unsub($client,$fname,$clientip), $userinput);
       } else {
    Failure($client, "not_found\n", $userinput);
       }
       return 1;
   }
   RegisterHandler("unusb", \&UnsubscribeHandler, 0, 1, 0);
   
   #   Subscribe to a resource
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub SubscribeHandler {
       my $cmd        = shift;
       my $tail       = shift;
       my $client     = shift;
       my $userinput  = "$cmd:$tail";
   
       Reply( $client, &subscribe($userinput,$clientip), $userinput);
   
       return 1;
   }
   RegisterHandler("sub", \&SubscribeHandler, 0, 1, 0);
   
   #
   #   Determine the version of a resource (?) Or is it return
   #   the top version of the resource?  Not yet clear from the
   #   code in currentversion.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub CurrentVersionHandler {
       my $cmd      = shift;
       my $tail     = shift;
       my $client   = shift;
       my $userinput= "$cmd:$tail";
      
       my $fname   = $tail;
       Reply( $client, &currentversion($fname)."\n", $userinput);
       return 1;
   
   }
   RegisterHandler("currentversion", \&CurrentVersionHandler, 0, 1, 0);
   
   
   #  Make an entry in a user's activity log.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub ActivityLogEntryHandler {
       my $cmd      = shift;
       my $tail     = shift;
       my $client   = shift;
       my $userinput= "$cmd:$tail";
   
       my ($udom,$uname,$what)=split(/:/,$tail);
       chomp($what);
       my $proname=propath($udom,$uname);
       my $now=time;
       my $hfh;
       if ($hfh=IO::File->new(">>$proname/activity.log")) { 
    print $hfh "$now:$clientname:$what\n";
    Reply( $client, "ok\n", $userinput); 
       } else {
    Failure($client, "error: ".($!+0)." IO::File->new Failed "
         ."while attempting log\n", 
         $userinput);
       }
   
       return 1;
   }
   RegisterHandler("log", \&ActivityLogEntryHandler, 0, 1, 0);
   #
   #   Put a namespace entry in a user profile hash.
   #   My druthers would be for this to be an encrypted interaction too.
   #   anything that might be an inadvertent covert channel about either
   #   user authentication or user personal information....
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub PutUserProfileEntry {
       my $cmd       = shift;
       my $tail      = shift;
       my $client    = shift;
       my $userinput = "$cmd:$tail";
       
       my ($udom,$uname,$namespace,$what) =split(/:/,$tail);
       if ($namespace ne 'roles') {
    chomp($what);
    my $hashref = TieUserHash($udom, $uname, $namespace,
     &GDBM_WRCREAT(),"P",$what);
    if($hashref) {
       my @pairs=split(/\&/,$what);
       foreach my $pair (@pairs) {
    my ($key,$value)=split(/=/,$pair);
    $hashref->{$key}=$value;
       }
       if (untie(%$hashref)) {
    Reply( $client, "ok\n", $userinput);
       } else {
    Failure($client, "error: ".($!+0)." untie(GDBM) failed ".
    "while attempting put\n", 
    $userinput);
       }
    } else {
       Failure( $client, "error: ".($!)." tie(GDBM) Failed ".
        "while attempting put\n", $userinput);
    }
       } else {
           Failure( $client, "refused\n", $userinput);
       }
       
       return 1;
   }
   RegisterHandler("put", \&PutUserProfileEntry, 0, 1, 0);
   
   # 
   #   Increment a profile entry in the user history file.
   #   The history contains keyword value pairs.  In this case,
   #   The value itself is a pair of numbers.  The first, the current value
   #   the second an increment that this function applies to the current
   #   value.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub IncrementUserValueHandler {
       my $cmd         = shift;
       my $tail        = shift;
       my $client      = shift;
       my $userinput   = "$cmd:$tail";
   
       my ($udom,$uname,$namespace,$what) =split(/:/,$tail);
       if ($namespace ne 'roles') {
           chomp($what);
    my $hashref = TieUserHash($udom, $uname,
     $namespace, &GDBM_WRCREAT(),
     "P",$what);
    if ($hashref) {
       my @pairs=split(/\&/,$what);
       foreach my $pair (@pairs) {
    my ($key,$value)=split(/=/,$pair);
    # We could check that we have a number...
    if (! defined($value) || $value eq '') {
       $value = 1;
    }
    $hashref->{$key}+=$value;
       }
       if (untie(%$hashref)) {
    Reply( $client, "ok\n", $userinput);
       } else {
    Failure($client, "error: ".($!+0)." untie(GDBM) failed ".
    "while attempting inc\n", $userinput);
       }
    } else {
       Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
       "while attempting inc\n", $userinput);
    }
       } else {
    Failure($client, "refused\n", $userinput);
       }
       
       return 1;
   }
   RegisterHandler("inc", \&IncrementUserValueHandler, 0, 1, 0);
   #
   #   Put a new role for a user.  Roles are LonCAPA's packaging of permissions.
   #   Each 'role' a user has implies a set of permissions.  Adding a new role
   #   for a person grants the permissions packaged with that role
   #   to that user when the role is selected.
   #
   # Parameters:
   #    $cmd       - The command string (rolesput).
   #    $tail      - The remainder of the request line.  For rolesput this
   #                 consists of a colon separated list that contains:
   #                 The domain and user that is granting the role (logged).
   #                 The domain and user that is getting the role.
   #                 The roles being granted as a set of & separated pairs.
   #                 each pair a key value pair.
   #    $client    - File descriptor connected to the client.
   # Returns:
   #     0         - If the daemon should exit
   #     1         - To continue processing.
   #
   #
   sub RolesPutHandler {
       my $cmd        = shift;
       my $tail       = shift;
       my $client     = shift;
       my $userinput  = "$cmd:$tail";
   
       my ($exedom,$exeuser,$udom,$uname,$what)   =split(/:/,$tail);
       &Debug("cmd = ".$cmd." exedom= ".$exedom."user = ".$exeuser." udom=".$udom.
      "what = ".$what);
       my $namespace='roles';
       chomp($what);
       my $hashref = TieUserHash($udom, $uname, $namespace,
         &GDBM_WRCREAT(), "P",
         "$exedom:$exeuser:$what");
       #
       #  Log the attempt to set a role.  The {}'s here ensure that the file 
       #  handle is open for the minimal amount of time.  Since the flush
       #  is done on close this improves the chances the log will be an un-
       #  corrupted ordered thing.
       if ($hashref) {
    my @pairs=split(/\&/,$what);
    foreach my $pair (@pairs) {
       my ($key,$value)=split(/=/,$pair);
       &ManagePermissions($key, $udom, $uname,
          &GetAuthType( $udom, $uname));
       $hashref->{$key}=$value;
    }
    if (untie($hashref)) {
       Reply($client, "ok\n", $userinput);
    } else {
       Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
        "while attempting rolesput\n", $userinput);
    }
       } else {
    Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting rolesput\n", $userinput);
       }
       return 1;
   }
   RegisterHandler("rolesput", \&RolesPutHandler, 1,1,0);  # Encoded client only.
   #
   #   Deletes (removes) a role for a user.   This is equivalent to removing
   #  a permissions package associated with the role from the user's profile.
   #
   # Parameters:
   #     $cmd                 - The command (rolesdel)
   #     $tail                - The remainder of the request line. This consists
   #                             of:
   #                             The domain and user requesting the change (logged)
   #                             The domain and user being changed.
   #                             The roles being revoked.  These are shipped to us
   #                             as a bunch of & separated role name keywords.
   #     $client              - The file handle open on the client.
   # Returns:
   #     1                    - Continue processing
   #     0                    - Exit.
   #
   sub RolesDeleteHandler {
       my $cmd          = shift;
       my $tail         = shift;
       my $client       = shift;
       my $userinput    = "$cmd:$tail";
      
       my ($exedom,$exeuser,$udom,$uname,$what)=split(/:/,$tail);
       &Debug("cmd = ".$cmd." exedom= ".$exedom."user = ".$exeuser." udom=".$udom.
      "what = ".$what);
       my $namespace='roles';
       chomp($what);
       my $hashref = TieUserHash($udom, $uname, $namespace,
         &GDBM_WRCREAT(), "D",
         "$exedom:$exeuser:$what");
       
       if ($hashref) {
    my @rolekeys=split(/\&/,$what);
   
    foreach my $key (@rolekeys) {
       delete $hashref->{$key};
    }
    if (untie(%$hashref)) {
       Reply($client, "ok\n", $userinput);
    } else {
       Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
        "while attempting rolesdel\n", $userinput);
    }
       } else {
           Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting rolesdel\n", $userinput);
       }
       
       return 1;
   }
   RegisterHandler("rolesdel", \&RolesDeleteHandler, 1,1, 0); # Encoded client only
   
   # Unencrypted get from a user's profile database.  See 
   # GetProfileEntryEncrypted for a version that does end-to-end encryption.
   # This function retrieves a keyed item from a specific named database in the
   # user's directory.
   #
   # Parameters:
   #   $cmd             - Command request keyword (get).
   #   $tail            - Tail of the command.  This is a colon separated list
   #                      consisting of the domain and username that uniquely
   #                      identifies the profile,
   #                      The 'namespace' which selects the gdbm file to 
   #                      do the lookup in, 
   #                      & separated list of keys to lookup.  Note that
   #                      the values are returned as an & separated list too.
   #   $client          - File descriptor open on the client.
   # Returns:
   #   1       - Continue processing.
   #   0       - Exit.
   #
   sub GetProfileEntry {
       my $cmd      = shift;
       my $tail     = shift;
       my $client   = shift;
       my $userinput= "$cmd:$tail";
      
       my ($udom,$uname,$namespace,$what) = split(/:/,$tail);
       chomp($what);
       my $hashref = TieUserHash($udom, $uname, $namespace,
         &GDBM_READER());
       if ($hashref) {
           my @queries=split(/\&/,$what);
           my $qresult='';
   
    for (my $i=0;$i<=$#queries;$i++) {
       $qresult.="$hashref->{$queries[$i]}&";    # Presumably failure gives empty string.
    }
    $qresult=~s/\&$//;              # Remove trailing & from last lookup.
    if (untie(%$hashref)) {
       Reply($client, "$qresult\n", $userinput);
    } else {
       Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
       "while attempting get\n", $userinput);
    }
       } else {
    if ($!+0 == 2) {               # +0 coerces errno -> number 2 is ENOENT
       Failure($client, "error:No such file or ".
       "GDBM reported bad block error\n", $userinput);
    } else {                        # Some other undifferentiated err.
       Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
       "while attempting get\n", $userinput);
    }
       }
       return 1;
   }
   RegisterHandler("get", \&GetProfileEntry, 0,1,0);
   #
   #  Process the encrypted get request.  Note that the request is sent
   #  in clear, but the reply is encrypted.  This is a small covert channel:
   #  information about the sensitive keys is given to the snooper.  Just not
   #  information about the values of the sensitive key.  Hmm if I wanted to
   #  know these I'd snoop for the egets. Get the profile item names from them
   #  and then issue a get for them since there's no enforcement of the
   #  requirement of an encrypted get for particular profile items.  If I
   #  were re-doing this, I'd force the request to be encrypted as well as the
   #  reply.  I'd also just enforce encrypted transactions for all gets since
   #  that would prevent any covert channel snooping.
   #
   #  Parameters:
   #     $cmd               - Command keyword of request (eget).
   #     $tail              - Tail of the command.  See GetProfileEntry #                          for more information about this.
   #     $client            - File open on the client.
   #  Returns:
   #     1      - Continue processing
   #     0      - server should exit.
   sub GetProfileEntryEncrypted {
       my $cmd       = shift;
       my $tail      = shift;
       my $client    = shift;
       my $userinput = "$cmd:$tail";
      
       my ($cmd,$udom,$uname,$namespace,$what) = split(/:/,$userinput);
       chomp($what);
       my $hashref = TieUserHash($udom, $uname, $namespace,
     &GDBM_READER());
       if ($hashref) {
           my @queries=split(/\&/,$what);
           my $qresult='';
    for (my $i=0;$i<=$#queries;$i++) {
       $qresult.="$hashref->{$queries[$i]}&";
    }
    if (untie(%$hashref)) {
       $qresult=~s/\&$//;
       if ($cipher) {
    my $cmdlength=length($qresult);
    $qresult.="         ";
    my $encqresult='';
    for(my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {
       $encqresult.= unpack("H16", 
    $cipher->encrypt(substr($qresult,
    $encidx,
    8)));
    }
    Reply( $client, "enc:$cmdlength:$encqresult\n", $userinput);
       } else {
    Failure( $client, "error:no_key\n", $userinput);
       }
    } else {
       Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
       "while attempting eget\n", $userinput);
    }
       } else {
    Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting eget\n", $userinput);
       }
       
       return 1;
   }
   RegisterHandler("eget", \&GetProfileEntryEncrypted, 0, 1, 0);
   
   #
   #   Deletes a key in a user profile database.
   #   
   #   Parameters:
   #       $cmd                  - Command keyword (del).
   #       $tail                 - Command tail.  IN this case a colon
   #                               separated list containing:
   #                               The domain and user that identifies uniquely
   #                               the identity of the user.
   #                               The profile namespace (name of the profile
   #                               database file).
   #                               & separated list of keywords to delete.
   #       $client              - File open on client socket.
   # Returns:
   #     1   - Continue processing
   #     0   - Exit server.
   #
   #
   
   sub DeleteProfileEntry {
       my $cmd      = shift;
       my $tail     = shift;
       my $client   = shift;
       my $userinput = "cmd:$tail";
   
       my ($udom,$uname,$namespace,$what) = split(/:/,$tail);
       chomp($what);
       my $hashref = TieUserHash($udom, $uname, $namespace,
     &GDBM_WRCREAT(),
     "D",$what);
       if ($hashref) {
           my @keys=split(/\&/,$what);
    foreach my $key (@keys) {
       delete($hashref->{$key});
    }
    if (untie(%$hashref)) {
       Reply($client, "ok\n", $userinput);
    } else {
       Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
       "while attempting del\n", $userinput);
    }
       } else {
    Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting del\n", $userinput);
       }
       return 1;
   }
   RegisterHandler("del", \&DeleteProfileEntry, 0, 1, 0);
   #
   #  List the set of keys that are defined in a profile database file.
   #  A successful reply from this will contain an & separated list of
   #  the keys. 
   # Parameters:
   #     $cmd              - Command request (keys).
   #     $tail             - Remainder of the request, a colon separated
   #                         list containing domain/user that identifies the
   #                         user being queried, and the database namespace
   #                         (database filename essentially).
   #     $client           - File open on the client.
   #  Returns:
   #    1    - Continue processing.
   #    0    - Exit the server.
   #
   sub GetProfileKeys {
       my $cmd       = shift;
       my $tail      = shift;
       my $client    = shift;
       my $userinput = "$cmd:$tail";
   
       my ($udom,$uname,$namespace)=split(/:/,$tail);
       my $qresult='';
       my $hashref = TieUserHash($udom, $uname, $namespace,
     &GDBM_READER());
       if ($hashref) {
    foreach my $key (keys %$hashref) {
       $qresult.="$key&";
    }
    if (untie(%$hashref)) {
       $qresult=~s/\&$//;
       Reply($client, "$qresult\n", $userinput);
    } else {
       Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
       "while attempting keys\n", $userinput);
    }
       } else {
    Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting keys\n", $userinput);
       }
      
       return 1;
   }
   RegisterHandler("keys", \&GetProfileKeys, 0, 1, 0);
   #
   #   Dump the contents of a user profile database.
   #   Note that this constitutes a very large covert channel too since
   #   the dump will return sensitive information that is not encrypted.
   #   The naive security assumption is that the session negotiation ensures
   #   our client is trusted and I don't believe that's assured at present.
   #   Sure want badly to go to ssl or tls.  Of course if my peer isn't really
   #   a LonCAPA node they could have negotiated an encryption key too so >sigh<.
   # 
   #  Parameters:
   #     $cmd           - The command request keyword (currentdump).
   #     $tail          - Remainder of the request, consisting of a colon
   #                      separated list that has the domain/username and
   #                      the namespace to dump (database file).
   #     $client        - file open on the remote client.
   # Returns:
   #     1    - Continue processing.
   #     0    - Exit the server.
   #
   sub DumpProfileDatabase {
       my $cmd       = shift;
       my $tail      = shift;
       my $client    = shift;
       my $userinput = "$cmd:$tail";
      
       my ($udom,$uname,$namespace) = split(/:/,$tail);
       my $hashref = TieUserHash($udom, $uname, $namespace,
     &GDBM_READER());
       if ($hashref) {
    # Structure of %data:
    # $data{$symb}->{$parameter}=$value;
    # $data{$symb}->{'v.'.$parameter}=$version;
    # since $parameter will be unescaped, we do not
     # have to worry about silly parameter names...
   
           my $qresult='';
    my %data = ();                     # A hash of anonymous hashes..
    while (my ($key,$value) = each(%$hashref)) {
       my ($v,$symb,$param) = split(/:/,$key);
       next if ($v eq 'version' || $symb eq 'keys');
       next if (exists($data{$symb}) && 
        exists($data{$symb}->{$param}) &&
        $data{$symb}->{'v.'.$param} > $v);
       $data{$symb}->{$param}=$value;
       $data{$symb}->{'v.'.$param}=$v;
    }
    if (untie(%$hashref)) {
       while (my ($symb,$param_hash) = each(%data)) {
    while(my ($param,$value) = each (%$param_hash)){
       next if ($param =~ /^v\./);       # Ignore versions...
       #
       #   Just dump the symb=value pairs separated by &
       #
       $qresult.=$symb.':'.$param.'='.$value.'&';
    }
       }
       chop($qresult);
       Reply($client , "$qresult\n", $userinput);
    } else {
       Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
        "while attempting currentdump\n", $userinput);
    }
       } else {
    Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting currentdump\n", $userinput);
       }
   
       return 1;
   }
   RegisterHandler("currentdump", \&DumpProfileDatabase, 0, 1, 0);
   #
   #   Dump a profile database with an optional regular expression
   #   to match against the keys.  In this dump, no effort is made
   #   to separate symb from version information. Presumably the
   #   databases that are dumped by this command are of a different
   #   structure.  Need to look at this and improve the documentation of
   #   both this and the currentdump handler.
   # Parameters:
   #    $cmd                     - The command keyword.
   #    $tail                    - All of the characters after the $cmd:
   #                               These are expected to be a colon
   #                               separated list containing:
   #                               domain/user - identifying the user.
   #                               namespace   - identifying the database.
   #                               regexp      - optional regular expression
   #                                             that is matched against
   #                                             database keywords to do
   #                                             selective dumps.
   #   $client                   - Channel open on the client.
   # Returns:
   #    1    - Continue processing.
   # Side effects:
   #    response is written to $client.
   #
   sub DumpWithRegexp {
       my $cmd    = shift;
       my $tail   = shift;
       my $client = shift;
   
       my $userinput = "$cmd:$tail";
   
       my ($udom,$uname,$namespace,$regexp)=split(/:/,$tail);
       if (defined($regexp)) {
    $regexp=&unescape($regexp);
       } else {
    $regexp='.';
       }
       my $hashref =TieUserHash($udom, $uname, $namespace,
    &GDBM_READER());
       if ($hashref) {
           my $qresult='';
    while (my ($key,$value) = each(%$hashref)) {
       if ($regexp eq '.') {
    $qresult.=$key.'='.$value.'&';
       } else {
    my $unescapeKey = &unescape($key);
    if (eval('$unescapeKey=~/$regexp/')) {
       $qresult.="$key=$value&";
    }
       }
    }
    if (untie(%$hashref)) {
       chop($qresult);
       Reply($client, "$qresult\n", $userinput);
    } else {
       Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
        "while attempting dump\n", $userinput);
    }
       } else {
    Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting dump\n", $userinput);
       }
   
       return 1;
   }
   RegisterHandler("dump", \&DumpWithRegexp, 0, 1, 0);
   
   #  Store an aitem in any resource meta data(?) or database with
   #  versioning?
   #
   #  Parameters:
   #    $cmd                - Request command keyword.
   #    $tail               - Tail of the request.  This is a colon
   #                          separated list containing:
   #                          domain/user - User and authentication domain.
   #                          namespace   - Name of the database being modified
   #                          rid         - Resource keyword to modify.
   #                          what        - new value associated with rid.
   #
   #    $client             - Socket open on the client.
   #
   #
   #  Returns:
   #      1 (keep on processing).
   #  Side-Effects:
   #    Writes to the client
   sub StoreHandler {
       my $cmd    = shift;
       my $tail   = shift;
       my $client = shift;
    
       my $userinput = "$cmd:$tail";
   
       my ($udom,$uname,$namespace,$rid,$what) =split(/:/,$tail);
       if ($namespace ne 'roles') {
   
    chomp($what);
    my @pairs=split(/\&/,$what);
    my $hashref  = TieUserHash($udom, $uname, $namespace,
          &GDBM_WRCREAT(), "P",
          "$rid:$what");
    if ($hashref) {
       my $now = time;
       my @previouskeys=split(/&/,$hashref->{"keys:$rid"});
       my $key;
       $hashref->{"version:$rid"}++;
       my $version=$hashref->{"version:$rid"};
       my $allkeys=''; 
       foreach my $pair (@pairs) {
    my ($key,$value)=split(/=/,$pair);
    $allkeys.=$key.':';
    $hashref->{"$version:$rid:$key"}=$value;
       }
       $hashref->{"$version:$rid:timestamp"}=$now;
       $allkeys.='timestamp';
       $hashref->{"$version:keys:$rid"}=$allkeys;
       if (untie($hashref)) {
    Reply($client, "ok\n", $userinput);
       } else {
    Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
    "while attempting store\n", $userinput);
       }
    } else {
       Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
        "while attempting store\n", $userinput);
    }
       } else {
    Failure($client, "refused\n", $userinput);
       }
   
       return 1;
   }
   RegisterHandler("store", \&StoreHandler, 0, 1, 0);
   #
   #   Restore a prior version of a resource.
   #
   #  Parameters:
   #     $cmd               - Command keyword.
   #     $tail              - Remainder of the request which consists of:
   #                          domain/user   - User and auth. domain.
   #                          namespace     - name of resource database.
   #                          rid           - Resource id.
   #    $client             - socket open on the client.
   #
   # Returns:
   #      1  indicating the caller should not yet exit.
   # Side-effects:
   #   Writes a reply to the client.
   #
   sub RestoreHandler {
       my $cmd     = shift;
       my $tail    = shift;
       my $client  = shift;
   
       my $userinput = "$cmd:$tail"; # Only used for logging purposes.
   
       my ($cmd,$udom,$uname,$namespace,$rid) = split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       chomp($rid);
       my $proname=propath($udom,$uname);
       my $qresult='';
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname/$namespace.db",
       &GDBM_READER(),0640)) {
    my $version=$hash{"version:$rid"};
    $qresult.="version=$version&";
    my $scope;
    for ($scope=1;$scope<=$version;$scope++) {
       my $vkeys=$hash{"$scope:keys:$rid"};
       my @keys=split(/:/,$vkeys);
       my $key;
       $qresult.="$scope:keys=$vkeys&";
       foreach $key (@keys) {
    $qresult.="$scope:$key=".$hash{"$scope:$rid:$key"}."&";
       }                                  
    }
    if (untie(%hash)) {
       $qresult=~s/\&$//;
       Reply( $client, "$qresult\n", $userinput);
    } else {
       Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
       "while attempting restore\n", $userinput);
    }
       } else {
    Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting restore\n", $userinput);
       }
     
       return 1;
   
   
   }
   RegisterHandler("restore", \&RestoreHandler, 0,1,0);
   
   #
   #   Add a chat message to to a discussion board.
   #
   # Parameters:
   #    $cmd                - Request keyword.
   #    $tail               - Tail of the command. A colon separated list
   #                          containing:
   #                          cdom    - Domain on which the chat board lives
   #                          cnum    - Identifier of the discussion group.
   #                          post    - Body of the posting.
   #   $client              - Socket open on the client.
   # Returns:
   #   1    - Indicating caller should keep on processing.
   #
   # Side-effects:
   #   writes a reply to the client.
   #
   #
   sub SendChatHandler {
       my $cmd     = shift;
       my $tail    = shift;
       my $client  = shift;
       
       my $userinput = "$cmd:$tail";
   
       my ($cdom,$cnum,$newpost)=split(/\:/,$tail);
       &chatadd($cdom,$cnum,$newpost);
       Reply($client, "ok\n", $userinput);
   
       return 1;
   }
   RegisterHandler("chatsend", \&SendChatHandler, 0, 1, 0);
   #
   #   Retrieve the set of chat messagss from a discussion board.
   #
   #  Parameters:
   #    $cmd             - Command keyword that initiated the request.
   #    $tail            - Remainder of the request after the command
   #                       keyword.  In this case a colon separated list of
   #                       chat domain    - Which discussion board.
   #                       chat id        - Discussion thread(?)
   #                       domain/user    - Authentication domain and username
   #                                        of the requesting person.
   #   $client           - Socket open on the client program.
   # Returns:
   #    1     - continue processing
   # Side effects:
   #    Response is written to the client.
   #
   sub RetrieveChatHandler {
       my $cmd      = shift;
       my $tail     = shift;
       my $client   = shift;
   
       my $userinput = "$cmd:$tail";
   
       my ($cdom,$cnum,$udom,$uname)=split(/\:/,$tail);
       my $reply='';
       foreach (&getchat($cdom,$cnum,$udom,$uname)) {
    $reply.=&escape($_).':';
       }
       $reply=~s/\:$//;
       Reply($client, $reply."\n", $userinput);
   
   
       return 1;
   }
   RegisterHandler("chatretr", \&RetrieveChatHandler, 0, 1, 0);
   #
   #  Initiate a query of an sql database.  SQL query repsonses get put in
   #  a file for later retrieval.  This prevents sql query results from
   #  bottlenecking the system.  Note that with loncnew, perhaps this is
   #  less of an issue since multiple outstanding requests can be concurrently
   #  serviced.
   #
   #  Parameters:
   #     $cmd       - COmmand keyword that initiated the request.
   #     $tail      - Remainder of the command after the keyword.
   #                  For this function, this consists of a query and
   #                  3 arguments that are self-documentingly labelled
   #                  in the original arg1, arg2, arg3.
   #     $client    - Socket open on the client.
   # Return:
   #    1   - Indicating processing should continue.
   # Side-effects:
   #    a reply is written to $client.
   #
   sub SendQueryHandler {
       my $cmd     = shift;
       my $tail    = shift;
       my $client  = shift;
   
       my $userinput = "$cmd:$tail";
   
       my ($query,$arg1,$arg2,$arg3)=split(/\:/,$tail);
       $query=~s/\n*$//g;
       Reply($client, "". sqlreply("$clientname\&$query".
    "\&$arg1"."\&$arg2"."\&$arg3")."\n",
     $userinput);
       
       return 1;
   }
   RegisterHandler("querysend", \&SendQueryHandler, 0, 1, 0);
   
   #
   #   Add a reply to an sql query.  SQL queries are done asyncrhonously.
   #   The query is submitted via a "querysend" transaction.
   #   There it is passed on to the lonsql daemon, queued and issued to
   #   mysql.
   #     This transaction is invoked when the sql transaction is complete
   #   it stores the query results in flie and indicates query completion.
   #   presumably local software then fetches this response... I'm guessing
   #   the sequence is: lonc does a querysend, we ask lonsql to do it.
   #   lonsql on completion of the query interacts with the lond of our
   #   client to do a query reply storing two files:
   #    - id     - The results of the query.
   #    - id.end - Indicating the transaction completed. 
   #    NOTE: id is a unique id assigned to the query and querysend time.
   # Parameters:
   #    $cmd        - Command keyword that initiated this request.
   #    $tail       - Remainder of the tail.  In this case that's a colon
   #                  separated list containing the query Id and the 
   #                  results of the query.
   #    $client     - Socket open on the client.
   # Return:
   #    1           - Indicating that we should continue processing.
   # Side effects:
   #    ok written to the client.
   #
   sub ReplyQueryHandler {
       my $cmd    = shift;
       my $tail   = shift;
       my $client = shift;
   
       my $userinput = "$cmd:$tail";
   
       my ($cmd,$id,$reply)=split(/:/,$userinput); 
       my $store;
       my $execdir=$perlvar{'lonDaemons'};
       if ($store=IO::File->new(">$execdir/tmp/$id")) {
    $reply=~s/\&/\n/g;
    print $store $reply;
    close $store;
    my $store2=IO::File->new(">$execdir/tmp/$id.end");
    print $store2 "done\n";
    close $store2;
    Reply($client, "ok\n", $userinput);
       } else {
    Failure($client, "error: ".($!+0)
    ." IO::File->new Failed ".
    "while attempting queryreply\n", $userinput);
       }
    
   
       return 1;
   }
   RegisterHandler("queryreply", \&ReplyQueryHandler, 0, 1, 0);
   #
   #  Process the courseidput query.  Not quite sure what this means
   #  at the system level sense.  It appears a gdbm file in the 
   #  /home/httpd/lonUsers/$domain/nohist_courseids is tied and
   #  a set of entries made in that database.
   #
   # Parameters:
   #   $cmd      - The command keyword that initiated this request.
   #   $tail     - Tail of the command.  In this case consists of a colon
   #               separated list contaning the domain to apply this to and
   #               an ampersand separated list of keyword=value pairs.
   #   $client   - Socket open on the client.
   # Returns:
   #   1    - indicating that processing should continue
   #
   # Side effects:
   #   reply is written to the client.
   #
   sub PutCourseIdHandler {
       my $cmd    = shift;
       my $tail   = shift;
       my $client = shift;
   
       my $userinput = "$cmd:$tail";
   
       my ($udom, $what) = split(/:/, $tail);
       chomp($what);
       my $now=time;
       my @pairs=split(/\&/,$what);
   
       my $hashref = TieDomainHash($udom, "nohist_courseids", &GDBM_WRCREAT());
       if ($hashref) {
    foreach my $pair (@pairs) {
       my ($key,$value)=split(/=/,$pair);
       $hashref->{$key}=$value.':'.$now;
    }
    if (untie(%$hashref)) {
       Reply($client, "ok\n", $userinput);
    } else {
       Failure( $client, "error: ".($!+0)
        ." untie(GDBM) Failed ".
        "while attempting courseidput\n", $userinput);
    }
       } else {
    Failure( $client, "error: ".($!+0)
    ." tie(GDBM) Failed ".
    "while attempting courseidput\n", $userinput);
       }
   
       return 1;
   }
   RegisterHandler("courseidput", \&PutCourseIdHandler, 0, 1, 0);
   
   #  Retrieves the value of a course id resource keyword pattern
   #  defined since a starting date.  Both the starting date and the
   #  keyword pattern are optional.  If the starting date is not supplied it
   #  is treated as the beginning of time.  If the pattern is not found,
   #  it is treatred as "." matching everything.
   #
   #  Parameters:
   #     $cmd     - Command keyword that resulted in us being dispatched.
   #     $tail    - The remainder of the command that, in this case, consists
   #                of a colon separated list of:
   #                 domain   - The domain in which the course database is 
   #                            defined.
   #                 since    - Optional parameter describing the minimum
   #                            time of definition(?) of the resources that
   #                            will match the dump.
   #                 description - regular expression that is used to filter
   #                            the dump.  Only keywords matching this regexp
   #                            will be used.
   #     $client  - The socket open on the client.
   # Returns:
   #    1     - Continue processing.
   # Side Effects:
   #   a reply is written to $client.
   sub DumpCourseIdHandler {
       my $cmd    = shift;
       my $tail   = shift;
       my $client = shift;
   
       my $userinput = "$cmd:$tail";
   
       my ($udom,$since,$description) =split(/:/,$tail);
       if (defined($description)) {
    $description=&unescape($description);
       } else {
    $description='.';
       }
       unless (defined($since)) { $since=0; }
       my $qresult='';
       logthis(" Looking for $description  since $since");
       my $hashref = TieDomainHash($udom, "nohist_courseids", &GDBM_WRCREAT());
       if ($hashref) {
    while (my ($key,$value) = each(%$hashref)) {
       my ($descr,$lasttime)=split(/\:/,$value);
       logthis("Got:  key = $key descr = $descr time: $lasttime");
       if ($lasttime<$since) { 
    logthis("Skipping .. too early");
    next; 
       }
       if ($description eq '.') {
    logthis("Adding wildcard match");
    $qresult.=$key.'='.$descr.'&';
       } else {
    my $unescapeVal = &unescape($descr);
    logthis("Matching with $unescapeVal");
    if (eval('$unescapeVal=~/$description/i')) {
       logthis("Adding on match");
       $qresult.="$key=$descr&";
    }
       }
    }
    if (untie(%$hashref)) {
       chop($qresult);
       Reply($client, "$qresult\n", $userinput);
    } else {
       Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
       "while attempting courseiddump\n", $userinput);
    }
       } else {
    Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting courseiddump\n", $userinput);
       }
   
   
       return 1;
   }
   RegisterHandler("courseiddump", \&DumpCourseIdHandler, 0, 1, 0);
   #
   #  Puts an id to a domains id database. 
   #
   #  Parameters:
   #   $cmd     - The command that triggered us.
   #   $tail    - Remainder of the request other than the command. This is a 
   #              colon separated list containing:
   #              $domain  - The domain for which we are writing the id.
   #              $pairs  - The id info to write... this is and & separated list
   #                        of keyword=value.
   #   $client  - Socket open on the client.
   #  Returns:
   #    1   - Continue processing.
   #  Side effects:
   #     reply is written to $client.
   #
   sub PutIdHandler {
       my $cmd    = shift;
       my $tail   = shift;
       my $client = shift;
   
       my $userinput = "$cmd:$tail";
   
       my ($udom,$what)=split(/:/,$tail);
       chomp($what);
       my @pairs=split(/\&/,$what);
       my $hashref = TieDomainHash($udom, "ids", &GDBM_WRCREAT(),
    "P", $what);
       if ($hashref) {
    foreach my $pair (@pairs) {
       my ($key,$value)=split(/=/,$pair);
       $hashref->{$key}=$value;
    }
    if (untie(%$hashref)) {
       Reply($client, "ok\n", $userinput);
    } else {
       Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
       "while attempting idput\n", $userinput);
    }
       } else {
    Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting idput\n", $userinput);
       }
   
       return 1;
   }
   
   RegisterHandler("idput", \&PutIdHandler, 0, 1, 0);
   #
   #  Retrieves a set of id values from the id database.
   #  Returns an & separated list of results, one for each requested id to the
   #  client.
   #
   # Parameters:
   #   $cmd       - Command keyword that caused us to be dispatched.
   #   $tail      - Tail of the command.  Consists of a colon separated:
   #               domain - the domain whose id table we dump
   #               ids      Consists of an & separated list of
   #                        id keywords whose values will be fetched.
   #                        nonexisting keywords will have an empty value.
   #   $client    - Socket open on the client.
   #
   # Returns:
   #    1 - indicating processing should continue.
   # Side effects:
   #   An & separated list of results is written to $client.
   #
   sub GetIdHandler {
       my $cmd    = shift;
       my $tail   = shift;
       my $client = shift;
       
       my $userinput = "$client:$tail";
       
       my ($udom,$what)=split(/:/,$tail);
       chomp($what);
       my @queries=split(/\&/,$what);
       my $qresult='';
       my $hashref = TieDomainHash($udom, "ids", &GDBM_READER());
       if ($hashref) {
    for (my $i=0;$i<=$#queries;$i++) {
       $qresult.="$hashref->{$queries[$i]}&";
    }
    if (untie(%$hashref)) {
       $qresult=~s/\&$//;
       Reply($client, "$qresult\n", $userinput);
    } else {
       Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
        "while attempting idget\n",$userinput);
    }
       } else {
    Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
    "while attempting idget\n",$userinput);
       }
       
       return 1;
   }
   
   RegisterHandler("idget", \&GetIdHandler, 0, 1, 0);
   #
   #  Process the tmpput command I'm not sure what this does.. Seems to
   #  create a file in the lonDaemons/tmp directory of the form $id.tmp
   # where Id is the client's ip concatenated with a sequence number.
   # The file will contain some value that is passed in.  Is this e.g.
   # a login token?
   #
   # Parameters:
   #    $cmd     - The command that got us dispatched.
   #    $tail    - The remainder of the request following $cmd:
   #               In this case this will be the contents of the file.
   #    $client  - Socket connected to the client.
   # Returns:
   #    1 indicating processing can continue.
   # Side effects:
   #   A file is created in the local filesystem.
   #   A reply is sent to the client.
   sub TmpPutHandler {
       my $cmd       = shift;
       my $what      = shift;
       my $client    = shift;
   
       my $userinput = "$cmd:$what"; # Reconstruct for logging.
   
   
       my $store;
       $tmpsnum++;
       my $id=$$.'_'.$clientip.'_'.$tmpsnum;
       $id=~s/\W/\_/g;
       $what=~s/\n//g;
       my $execdir=$perlvar{'lonDaemons'};
       if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) {
    print $store $what;
    close $store;
    Reply($client, "$id\n", $userinput);
       } else {
    Failure( $client, "error: ".($!+0)."IO::File->new Failed ".
    "while attempting tmpput\n", $userinput);
       }
       return 1;
     
   }
   RegisterHandler("tmpput", \&TmpPutHandler, 0, 1, 0);
   
   #   Processes the tmpget command.  This command returns the contents
   #  of a temporary resource file(?) created via tmpput.
   #
   # Paramters:
   #    $cmd      - Command that got us dispatched.
   #    $id       - Tail of the command, contain the id of the resource
   #                we want to fetch.
   #    $client   - socket open on the client.
   # Return:
   #    1         - Inidcating processing can continue.
   # Side effects:
   #   A reply is sent to the client.
   
   #
   sub TmpGetHandler {
       my $cmd       = shift;
       my $id        = shift;
       my $client    = shift;
       my $userinput = "$cmd:$id"; 
       
       chomp($id);
       $id=~s/\W/\_/g;
       my $store;
       my $execdir=$perlvar{'lonDaemons'};
       if ($store=IO::File->new("$execdir/tmp/$id.tmp")) {
    my $reply=<$store>;
    Reply( $client, "$reply\n", $userinput);
    close $store;
       } else {
    Failure( $client, "error: ".($!+0)."IO::File->new Failed ".
    "while attempting tmpget\n", $userinput);
       }
   
       return 1;
   }
   RegisterHandler("tmpget", \&TmpGetHandler, 0, 1, 0);
   #
   #  Process the tmpdel command.  This command deletes a temp resource
   #  created by the tmpput command.
   #
   # Parameters:
   #   $cmd      - Command that got us here.
   #   $id       - Id of the temporary resource created.
   #   $client   - socket open on the client process.
   #
   # Returns:
   #   1     - Indicating processing should continue.
   # Side Effects:
   #   A file is deleted
   #   A reply is sent to the client.
   sub TmpDelHandler {
       my $cmd      = shift;
       my $id       = shift;
       my $client   = shift;
       
       my $userinput= "$cmd:$id";
       
       chomp($id);
       $id=~s/\W/\_/g;
       my $execdir=$perlvar{'lonDaemons'};
       if (unlink("$execdir/tmp/$id.tmp")) {
    Reply($client, "ok\n", $userinput);
       } else {
    Failure( $client, "error: ".($!+0)."Unlink tmp Failed ".
    "while attempting tmpdel\n", $userinput);
       }
       
       return 1;
   
   }
   RegisterHandler("tmpdel", \&TmpDelHandler, 0, 1, 0);
   #
   #   ls  - list the contents of a directory.  For each file in the
   #    selected directory the filename followed by the full output of
   #    the stat function is returned.  The returned info for each
   #    file are separated by ':'.  The stat fields are separated by &'s.
   # Parameters:
   #    $cmd        - The command that dispatched us (ls).
   #    $ulsdir     - The directory path to list... I'm not sure what this
   #                  is relative as things like ls:. return e.g.
   #                  no_such_dir.
   #    $client     - Socket open on the client.
   # Returns:
   #     1 - indicating that the daemon should not disconnect.
   # Side Effects:
   #   The reply is written to  $client.
   #
   sub LsHandler {
       my $cmd     = shift;
       my $ulsdir  = shift;
       my $client  = shift;
   
       my $userinput = "$cmd:$ulsdir";
   
       my $ulsout='';
       my $ulsfn;
       if (-e $ulsdir) {
    if(-d $ulsdir) {
       if (opendir(LSDIR,$ulsdir)) {
    while ($ulsfn=readdir(LSDIR)) {
       my @ulsstats=stat($ulsdir.'/'.$ulsfn);
       $ulsout.=$ulsfn.'&'.
    join('&',@ulsstats).':';
    }
    closedir(LSDIR);
       }
    } else {
       my @ulsstats=stat($ulsdir);
       $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
    }
       } else {
    $ulsout='no_such_dir';
       }
       if ($ulsout eq '') { $ulsout='empty'; }
       Reply($client, "$ulsout\n", $userinput);
   
   
       return 1;
   }
   RegisterHandler("ls", \&LsHandler, 0, 1, 0);
   
   
   #
   #   Processes the setannounce command.  This command
   #   creates a file named announce.txt in the top directory of
   #   the documentn root and sets its contents.  The announce.txt file is
   #   printed in its entirety at the LonCAPA login page.  Note:
   #   once the announcement.txt fileis created it cannot be deleted.
   #   However, setting the contents of the file to empty removes the
   #   announcement from the login page of loncapa so who cares.
   #
   # Parameters:
   #    $cmd          - The command that got us dispatched.
   #    $announcement - The text of the announcement.
   #    $client       - Socket open on the client process.
   # Retunrns:
   #   1             - Indicating request processing should continue
   # Side Effects:
   #   The file {DocRoot}/announcement.txt is created.
   #   A reply is sent to $client.
   #
   sub SetAnnounceHandler {
       my $cmd          = shift;
       my $announcement = shift;
       my $client       = shift;
     
       my $userinput    = "$cmd:$announcement";
   
       chomp($announcement);
       $announcement=&unescape($announcement);
       if (my $store=IO::File->new('>'.$perlvar{'lonDocRoot'}.
    '/announcement.txt')) {
    print $store $announcement;
    close $store;
    Reply($client, "ok\n", $userinput);
       } else {
    Failure($client, "error: ".($!+0)."\n", $userinput);
       }
   
       return 1;
   }
   RegisterHandler("setannounce", \&SetAnnounceHandler, 0, 1, 0);
   
   #
   #  Return the version of the daemon.  This can be used to determine
   #  the compatibility of cross version installations or, alternatively to
   #  simply know who's out of date and who isn't.  Note that the version
   #  is returned concatenated with the tail.
   # Parameters:
   #   $cmd        - the request that dispatched to us.
   #   $tail       - Tail of the request (client's version?).
   #   $client     - Socket open on the client.
   #Returns:
   #   1 - continue processing requests.
   # Side Effects:
   #   Replies with version to $client.
   sub GetVersionHandler {
       my $client     = shift;
       my $tail       = shift;
       my $client     = shift;
       my $userinput  = $client;
       
       Reply($client, &version($userinput)."\n", $userinput);
   
   
       return 1;
   }
   RegisterHandler("version", \&GetVersionHandler, 0, 1, 0);
   
   #  Set the current host and domain.  This is used to support
   #  multihomed systems.  Each IP of the system, or even separate daemons
   #  on the same IP can be treated as handling a separate lonCAPA virtual
   #  machine.  This command selects the virtual lonCAPA.  The client always
   #  knows the right one since it is lonc and it is selecting the domain/system
   #  from the hosts.tab file.
   # Parameters:
   #    $cmd      - Command that dispatched us.
   #    $tail     - Tail of the command (domain/host requested).
   #    $socket   - Socket open on the client.
   #
   # Returns:
   #     1   - Indicates the program should continue to process requests.
   # Side-effects:
   #     The default domain/system context is modified for this daemon.
   #     a reply is sent to the client.
   #
   sub SelectHostHandler {
       my $cmd        = shift;
       my $tail       = shift;
       my $socket     = shift;
     
       my $userinput  ="$cmd:$tail";
   
       Reply($client, &sethost($userinput)."\n", $userinput);
   
   
       return 1;
   }
   RegisterHandler("sethost", \&SelectHostHandler, 0, 1, 0);
   
   #  Process a request to exit:
   #   - "bye" is sent to the client.
   #   - The client socket is shutdown and closed.
   #   - We indicate to the caller that we should exit.
   # Formal Parameters:
   #   $cmd                - The command that got us here.
   #   $tail               - Tail of the command (empty).
   #   $client             - Socket open on the tail.
   # Returns:
   #   0      - Indicating the program should exit!!
   #
   sub ExitHandler {
       my $cmd     = shift;
       my $tail    = shift;
       my $client  = shift;
   
       my $userinput = "$cmd:$tail";
   
       &logthis("Client $clientip ($clientname) hanging up: $userinput");
       Reply($client, "bye\n", $userinput);
       $client->shutdown(2);        # shutdown the socket forcibly.
       $client->close();
   
       return 0;
   }
   RegisterHandler("exit", \&ExitHandler, 0, 1,1);
   RegisterHandler("init", \&ExitHandler, 0, 1,1); # RE-init is like exit.
   RegisterHandler("quit", \&ExitHandler, 0, 1,1); # I like this too!
   #------------------------------------------------------------------------------------
   #
   #   Process a Request.  Takes a request from the client validates
   #   it and performs the operation requested by it.  Returns
   #   a response to the client.
   #
   #  Parameters:
   #      request      - A string containing the user's request.
   #  Returns:
   #      0            - Requested to exit, caller should shut down.
   #      1            - Accept additional requests from the client.
   #
   sub ProcessRequest {
       my $Request      = shift;
       my $KeepGoing    = 1; # Assume we're not asked to stop.
       
       my $wasenc=0;
       my $userinput = $Request;   # for compatibility with oldcode <yeach>
   
   
   # ------------------------------------------------------------ See if encrypted
      
       if($userinput =~ /^enc/) {
    $wasenc = 1;
    $userinput = Decipher($userinput);
    if(! $userinput) {
       Failure($client,"error:Encrypted data without negotiating key");
       return 0;                      # Break off with this imposter.
    }
       }
       # Split off the request keyword from the rest of the stuff.
      
       my ($command, $tail) = split(/:/, $userinput, 2);
   
       Debug("Command received: $command, encoded = $wasenc");
   
      
   # ------------------------------------------------------------- Normal commands
   
       # 
       #   If the command is in the hash, then execute it via the hash dispatch:
       #
       if(defined $Dispatcher{$command}) {
   
    my $DispatchInfo = $Dispatcher{$command};
    my $Handler      = $$DispatchInfo[0];
    my $NeedEncode   = $$DispatchInfo[1];
    my $ClientTypes  = $$DispatchInfo[2];
    Debug("Matched dispatch hash: mustencode: $NeedEncode ClientType $ClientTypes");
         
    #  Validate the request:
         
    my $ok = 1;
    my $requesterprivs = 0;
    if(isClient()) {
       $requesterprivs |= $CLIENT_OK;
    }
    if(isManager()) {
       $requesterprivs |= $MANAGER_OK;
    }
    if($NeedEncode && (!$wasenc)) {
       Debug("Must encode but wasn't: $NeedEncode $wasenc");
       $ok = 0;
    }
    if(($ClientTypes & $requesterprivs) == 0) {
       Debug("Client not privileged to do this operation");
       $ok = 0;
    }
   
    if($ok) {
       Debug("Dispatching to handler $command $tail");
       $KeepGoing = &$Handler($command, $tail, $client);
    } else {
       Debug("Refusing to dispatch because ok is false");
       Failure($client, "refused", $userinput);
    }
   
   
   # ------------------------------------------------------------- unknown command
   
       } else {
    # unknown command
    Failure($client, "unknown_cmd\n", $userinput);
       }
   
       return $KeepGoing;
   }
   
   
 #  #
 #   GetCertificate: Given a transaction that requires a certificate,  #   GetCertificate: Given a transaction that requires a certificate,
Line 156  sub GetCertificate { Line 2755  sub GetCertificate {
   
     return $clientip;      return $clientip;
 }  }
   
   
   
 #  #
 #   ReadManagerTable: Reads in the current manager table. For now this is  #   ReadManagerTable: Reads in the current manager table. For now this is
 #                     done on each manager authentication because:  #                     done on each manager authentication because:
Line 179  sub ReadManagerTable { Line 2781  sub ReadManagerTable {
     }      }
     while(my $host = <MANAGERS>) {      while(my $host = <MANAGERS>) {
  chomp($host);   chomp($host);
  if (!defined $hostip{$host}) {   if ($host =~ "^#") {                  # Comment line.
     logthis('<font color="red"> manager '.$host.      logthis('<font color="green"> Skipping line: '. "$host</font>\n");
     " not in hosts.tab, rejected as manager</font>");      next;
    }
    if (!defined $hostip{$host}) { # This is a non cluster member
       #  The entry is of the form:
       #    cluname:hostname
       #  cluname - A 'cluster hostname' is needed in order to negotiate
       #            the host key.
       #  hostname- The dns name of the host.
       #
       my($cluname, $dnsname) = split(/:/, $host);
       
       my $ip = gethostbyname($dnsname);
       if(defined($ip)) {                 # bad names don't deserve entry.
    my $hostip = inet_ntoa($ip);
    $managers{$hostip} = $cluname;
    logthis('<font color="green"> registering manager '.
    "$dnsname as $cluname with $hostip </font>\n");
       }
  } else {   } else {
     $managers{$host} = $hostip{$host}; # Whatever for now.      logthis('<font color="green"> existing host'." $host</font>\n");
       $managers{$hostip{$host}} = $host;  # Use info from cluster tab if clumemeber
  }   }
     }      }
 }  }
Line 198  sub ReadManagerTable { Line 2818  sub ReadManagerTable {
 sub ValidManager {  sub ValidManager {
     my $certificate = shift;       my $certificate = shift; 
   
     ReadManagerTable;      return isManager;
   
     my $hostname   = $hostid{$certificate};  
   
   
     if ($hostname ne undef) {  
  if($managers{$hostname} ne undef) {  
     &logthis('<font color="yellow">Authenticating manager'.  
      " $hostname</font>");  
     return 1;  
  } else {  
     &logthis('<font color="red" failed manager authentication '.  
      $hostname." is not a valid manager host</font>");  
     return 0;  
  }  
     } else {  
  &logthis('<font color="red"> Failed manager authentication '.  
  "$certificate </font>");  
  return 0;  
     }  
 }  }
 #  #
 #  CopyFile:  Called as part of the process of installing a   #  CopyFile:  Called as part of the process of installing a 
Line 238  sub CopyFile { Line 2839  sub CopyFile {
   
     if(-e $oldfile) {      if(-e $oldfile) {
   
  # Read the old file.   # Read the old file.
   
  my $oldfh = IO::File->new("< $oldfile");   my $oldfh = IO::File->new("< $oldfile");
  if(!$oldfh) {   if(!$oldfh) {
Line 296  sub AdjustHostContents { Line 2897  sub AdjustHostContents {
     chomp($line);      chomp($line);
     my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon)=split(/:/,$line);      my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon)=split(/:/,$line);
     if ($id eq $me) {      if ($id eq $me) {
  open(PIPE, " /usr/bin/host $name |") || die "Cant' make host pipeline";   my $ip = gethostbyname($name);
  my $hostinfo = <PIPE>;   my $ipnew = inet_ntoa($ip);
  close PIPE;   $ip = $ipnew;
   
  my ($hostname, $has, $address, $ipnew) = split(/ /,$hostinfo);  
  &logthis('<font color="green">'.  
  "hostname = $hostname me = $me, name = $name   actual ip = $ipnew </font>");  
   
  if ($hostname eq $name) { # Lookup succeeded..  
     &logthis('<font color="green"> look up ok <font>');  
     $ip = $ipnew;  
  } else {  
     &logthis('<font color="green"> Lookup failed: '  
      .$hostname." ne $name </font>");  
  }  
  #  Reconstruct the host line and append to adjusted:   #  Reconstruct the host line and append to adjusted:
   
  my $newline = "$id:$domain:$role:$name:$ip";   my $newline = "$id:$domain:$role:$name:$ip";
Line 349  sub InstallFile { Line 2938  sub InstallFile {
     my $TempFile = $Filename.".tmp";      my $TempFile = $Filename.".tmp";
   
     #  Open the file for write:      #  Open the file for write:
       
     my $fh = IO::File->new("> $TempFile"); # Write to temp.      my $fh = IO::File->new("> $TempFile"); # Write to temp.
     if(!(defined $fh)) {      if(!(defined $fh)) {
  &logthis('<font color="red"> Unable to create '.$TempFile."</font>");   &logthis('<font color="red"> Unable to create '.$TempFile."</font>");
  return 0;   return 0;
     }      }
     #  write the contents of the file:      #  write the contents of the file:
       
     print $fh ($Contents);       print $fh ($Contents); 
     $fh->close; # In case we ever have a filesystem w. locking      $fh->close; # In case we ever have a filesystem w. locking
   
Line 368  sub InstallFile { Line 2957  sub InstallFile {
   
     return 1;      return 1;
 }  }
   #
   #   ConfigFileFromSelector: converts a configuration file selector
   #                 (one of host or domain at this point) into a 
   #                 configuration file pathname.
   #
   #  Parameters:
   #      selector  - Configuration file selector.
   #  Returns:
   #      Full path to the file or undef if the selector is invalid.
   #
   sub ConfigFileFromSelector {
       my $selector   = shift;
       my $tablefile;
   
       my $tabledir = $perlvar{'lonTabDir'}.'/';
       if ($selector eq "hosts") {
    $tablefile = $tabledir."hosts.tab";
       } elsif ($selector eq "domain") {
    $tablefile = $tabledir."domain.tab";
       } else {
    return undef;
       }
       return $tablefile;
   
   }
 #  #
 #   PushFile:  Called to do an administrative push of a file.  #   PushFile:  Called to do an administrative push of a file.
 #              - Ensure the file being pushed is one we support.  #              - Ensure the file being pushed is one we support.
Line 398  sub PushFile { Line 3011  sub PushFile {
     # part of some elaborate spoof that managed somehow to authenticate.      # part of some elaborate spoof that managed somehow to authenticate.
     #      #
   
     my $tablefile = $perlvar{'lonTabDir'}.'/'; # need to precede with dir.  
     if ($filename eq "host") {      my $tablefile = ConfigFileFromSelector($filename);
  $tablefile .= "hosts.tab";      if(! (defined $tablefile)) {
     } elsif ($filename eq "domain") {  
  $tablefile .= "domain.tab";  
     } else {  
  return "refused";   return "refused";
     }      }
     #      #
Line 418  sub PushFile { Line 3028  sub PushFile {
  return "error:$!";   return "error:$!";
     }      }
     &logthis('<font color="green"> Pushfile: backed up '      &logthis('<font color="green"> Pushfile: backed up '
     .$tablefile." to $backupfile</font>");       .$tablefile." to $backupfile</font>");
           
     #  If the file being pushed is the host file, we adjust the entry for ourself so that the      #  If the file being pushed is the host file, we adjust the entry for ourself so that the
     #  IP will be our current IP as looked up in dns.  Note this is only 99% good as it's possible      #  IP will be our current IP as looked up in dns.  Note this is only 99% good as it's possible
Line 434  sub PushFile { Line 3044  sub PushFile {
   
     if(!InstallFile($tablefile, $contents)) {      if(!InstallFile($tablefile, $contents)) {
  &logthis('<font color="red"> Pushfile: unable to install '   &logthis('<font color="red"> Pushfile: unable to install '
  .$tablefile." $! </font>");   .$tablefile." $! </font>");
  return "error:$!";   return "error:$!";
     }      } else {
     else {  
  &logthis('<font color="green"> Installed new '.$tablefile   &logthis('<font color="green"> Installed new '.$tablefile
  ."</font>");   ."</font>");
   
     }      }
   
   
Line 495  sub ReinitProcess { Line 3104  sub ReinitProcess {
     }      }
     return 'ok';      return 'ok';
 }  }
   #   Validate a line in a configuration file edit script:
   #   Validation includes:
   #     - Ensuring the command is valid.
   #     - Ensuring the command has sufficient parameters
   #   Parameters:
   #     scriptline - A line to validate (\n has been stripped for what it's worth).
   #
   #   Return:
   #      0     - Invalid scriptline.
   #      1     - Valid scriptline
   #  NOTE:
   #     Only the command syntax is checked, not the executability of the
   #     command.
   #
   sub isValidEditCommand {
       my $scriptline = shift;
   
       #   Line elements are pipe separated:
   
       my ($command, $key, $newline)  = split(/\|/, $scriptline);
       &logthis('<font color="green"> isValideditCommand checking: '.
        "Command = '$command', Key = '$key', Newline = '$newline' </font>\n");
       
       if ($command eq "delete") {
    #
    #   key with no newline.
    #
    if( ($key eq "") || ($newline ne "")) {
       return 0; # Must have key but no newline.
    } else {
       return 1; # Valid syntax.
    }
       } elsif ($command eq "replace") {
    #
    #   key and newline:
    #
    if (($key eq "") || ($newline eq "")) {
       return 0;
    } else {
       return 1;
    }
       } elsif ($command eq "append") {
    if (($key ne "") && ($newline eq "")) {
       return 1;
    } else {
       return 0;
    }
       } else {
    return 0; # Invalid command.
       }
       return 0; # Should not get here!!!
   }
   #
   #   ApplyEdit - Applies an edit command to a line in a configuration 
   #               file.  It is the caller's responsiblity to validate the
   #               edit line.
   #   Parameters:
   #      $directive - A single edit directive to apply.  
   #                   Edit directives are of the form:
   #                  append|newline      - Appends a new line to the file.
   #                  replace|key|newline - Replaces the line with key value 'key'
   #                  delete|key          - Deletes the line with key value 'key'.
   #      $editor   - A config file editor object that contains the
   #                  file being edited.
   #
   sub ApplyEdit {
       my $directive   = shift;
       my $editor      = shift;
   
       # Break the directive down into its command and its parameters
       # (at most two at this point.  The meaning of the parameters, if in fact
       #  they exist depends on the command).
   
       my ($command, $p1, $p2) = split(/\|/, $directive);
   
       if($command eq "append") {
    $editor->Append($p1);          # p1 - key p2 null.
       } elsif ($command eq "replace") {
    $editor->ReplaceLine($p1, $p2);   # p1 - key p2 = newline.
       } elsif ($command eq "delete") {
    $editor->DeleteLine($p1);         # p1 - key p2 null.
       } else {          # Should not get here!!!
    die "Invalid command given to ApplyEdit $command";
       }
   }
   #
   # AdjustOurHost:
   #           Adjusts a host file stored in a configuration file editor object
   #           for the true IP address of this host. This is necessary for hosts
   #           that live behind a firewall.
   #           Those hosts have a publicly distributed IP of the firewall, but
   #           internally must use their actual IP.  We assume that a given
   #           host only has a single IP interface for now.
   # Formal Parameters:
   #     editor   - The configuration file editor to adjust.  This
   #                editor is assumed to contain a hosts.tab file.
   # Strategy:
   #    - Figure out our hostname.
   #    - Lookup the entry for this host.
   #    - Modify the line to contain our IP
   #    - Do a replace for this host.
   sub AdjustOurHost {
       my $editor        = shift;
   
       # figure out who I am.
   
       my $myHostName    = $perlvar{'lonHostID'}; # LonCAPA hostname.
   
       #  Get my host file entry.
   
       my $ConfigLine    = $editor->Find($myHostName);
       if(! (defined $ConfigLine)) {
    die "AdjustOurHost - no entry for me in hosts file $myHostName";
       }
       # figure out my IP:
       #   Use the config line to get my hostname.
       #   Use gethostbyname to translate that into an IP address.
       #
       my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon) = split(/:/,$ConfigLine);
       my $BinaryIp = gethostbyname($name);
       my $ip       = inet_ntoa($ip);
       #
       #  Reassemble the config line from the elements in the list.
       #  Note that if the loncnew items were not present before, they will
       #  be now even if they would be empty
       #
       my $newConfigLine = $id;
       foreach my $item ($domain, $role, $name, $ip, $maxcon, $idleto, $mincon) {
    $newConfigLine .= ":".$item;
       }
       #  Replace the line:
   
       $editor->ReplaceLine($id, $newConfigLine);
       
   }
   #
   #   ReplaceConfigFile:
   #              Replaces a configuration file with the contents of a
   #              configuration file editor object.
   #              This is done by:
   #              - Copying the target file to <filename>.old
   #              - Writing the new file to <filename>.tmp
   #              - Moving <filename.tmp>  -> <filename>
   #              This laborious process ensures that the system is never without
   #              a configuration file that's at least valid (even if the contents
   #              may be dated).
   #   Parameters:
   #        filename   - Name of the file to modify... this is a full path.
   #        editor     - Editor containing the file.
   #
   sub ReplaceConfigFile {
       my $filename  = shift;
       my $editor    = shift;
   
       CopyFile ($filename, $filename.".old");
   
       my $contents  = $editor->Get(); # Get the contents of the file.
   
       InstallFile($filename, $contents);
   }
   #   
   #
   #   Called to edit a configuration table  file
   #   Parameters:
   #      request           - The entire command/request sent by lonc or lonManage
   #   Return:
   #      The reply to send to the client.
   #
   sub EditFile {
       my $request = shift;
   
       #  Split the command into it's pieces:  edit:filetype:script
   
       my ($request, $filetype, $script) = split(/:/, $request,3); # : in script
   
       #  Check the pre-coditions for success:
   
       if($request != "edit") { # Something is amiss afoot alack.
    return "error:edit request detected, but request != 'edit'\n";
       }
       if( ($filetype ne "hosts")  &&
    ($filetype ne "domain")) {
    return "error:edit requested with invalid file specifier: $filetype \n";
       }
   
       #   Split the edit script and check it's validity.
   
       my @scriptlines = split(/\n/, $script);  # one line per element.
       my $linecount   = scalar(@scriptlines);
       for(my $i = 0; $i < $linecount; $i++) {
    chomp($scriptlines[$i]);
    if(!isValidEditCommand($scriptlines[$i])) {
       return "error:edit with bad script line: '$scriptlines[$i]' \n";
    }
       }
   
       #   Execute the edit operation.
       #   - Create a config file editor for the appropriate file and 
       #   - execute each command in the script:
       #
       my $configfile = ConfigFileFromSelector($filetype);
       if (!(defined $configfile)) {
    return "refused\n";
       }
       my $editor = ConfigFileEdit->new($configfile);
   
       for (my $i = 0; $i < $linecount; $i++) {
    ApplyEdit($scriptlines[$i], $editor);
       }
       # If the file is the host file, ensure that our host is
       # adjusted to have our ip:
       #
       if($filetype eq "host") {
    AdjustOurHost($editor);
       }
       #  Finally replace the current file with our file.
       #
       ReplaceConfigFile($configfile, $editor);
   
       return "ok\n";
   }
 #  #
 #  Convert an error return code from lcpasswd to a string value.  #  Convert an error return code from lcpasswd to a string value.
 #  #
Line 525  sub catchexception { Line 3354  sub catchexception {
     my ($error)=@_;      my ($error)=@_;
     $SIG{'QUIT'}='DEFAULT';      $SIG{'QUIT'}='DEFAULT';
     $SIG{__DIE__}='DEFAULT';      $SIG{__DIE__}='DEFAULT';
       &status("Catching exception");
     &logthis("<font color=red>CRITICAL: "      &logthis("<font color=red>CRITICAL: "
      ."ABNORMAL EXIT. Child $$ for server $thisserver died through "       ."ABNORMAL EXIT. Child $$ for server $thisserver died through "
      ."a crash with this error msg->[$error]</font>");       ."a crash with this error msg->[$error]</font>");
     &logthis('Famous last words: '.$status.' - '.$lastlog);      &logthis('Famous last words: '.$status.' - '.$lastlog);
     if ($client) { print $client "error: $error\n"; }      if ($client) { print $client "error: $error\n"; }
     $server->close();      $server->close();
Line 535  sub catchexception { Line 3365  sub catchexception {
 }  }
   
 sub timeout {  sub timeout {
       &status("Handling Timeout");
     &logthis("<font color=ref>CRITICAL: TIME OUT ".$$."</font>");      &logthis("<font color=ref>CRITICAL: TIME OUT ".$$."</font>");
     &catchexception('Timeout');      &catchexception('Timeout');
 }  }
Line 552  undef $perlvarref; Line 3383  undef $perlvarref;
 # ----------------------------- Make sure this process is running from user=www  # ----------------------------- Make sure this process is running from user=www
 my $wwwid=getpwnam('www');  my $wwwid=getpwnam('www');
 if ($wwwid!=$<) {  if ($wwwid!=$<) {
    my $emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}";      my $emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}";
    my $subj="LON: $currenthostid User ID mismatch";      my $subj="LON: $currenthostid User ID mismatch";
    system("echo 'User ID mismatch.  lond must be run as user www.' |\      system("echo 'User ID mismatch.  lond must be run as user www.' |\
  mailto $emailto -s '$subj' > /dev/null");   mailto $emailto -s '$subj' > /dev/null");
    exit 1;      exit 1;
 }  }
   
 # --------------------------------------------- Check if other instance running  # --------------------------------------------- Check if other instance running
Line 564  if ($wwwid!=$<) { Line 3395  if ($wwwid!=$<) {
 my $pidfile="$perlvar{'lonDaemons'}/logs/lond.pid";  my $pidfile="$perlvar{'lonDaemons'}/logs/lond.pid";
   
 if (-e $pidfile) {  if (-e $pidfile) {
    my $lfh=IO::File->new("$pidfile");      my $lfh=IO::File->new("$pidfile");
    my $pide=<$lfh>;      my $pide=<$lfh>;
    chomp($pide);      chomp($pide);
    if (kill 0 => $pide) { die "already running"; }      if (kill 0 => $pide) { die "already running"; }
 }  }
   
 # ------------------------------------------------------------- Read hosts file  # ------------------------------------------------------------- Read hosts file
Line 580  $server = IO::Socket::INET->new(LocalPor Line 3411  $server = IO::Socket::INET->new(LocalPor
                                 Proto     => 'tcp',                                  Proto     => 'tcp',
                                 Reuse     => 1,                                  Reuse     => 1,
                                 Listen    => 10 )                                  Listen    => 10 )
   or die "making socket: $@\n";      or die "making socket: $@\n";
   
 # --------------------------------------------------------- Do global variables  # --------------------------------------------------------- Do global variables
   
Line 591  my $children               = 0;        # Line 3422  my $children               = 0;        #
   
 sub REAPER {                        # takes care of dead children  sub REAPER {                        # takes care of dead children
     $SIG{CHLD} = \&REAPER;      $SIG{CHLD} = \&REAPER;
       &status("Handling child death");
     my $pid = wait;      my $pid = wait;
     if (defined($children{$pid})) {      if (defined($children{$pid})) {
  &logthis("Child $pid died");   &logthis("Child $pid died");
Line 599  sub REAPER {                        # ta Line 3431  sub REAPER {                        # ta
     } else {      } else {
  &logthis("Unknown Child $pid died");   &logthis("Unknown Child $pid died");
     }      }
       &status("Finished Handling child death");
 }  }
   
 sub HUNTSMAN {                      # signal handler for SIGINT  sub HUNTSMAN {                      # signal handler for SIGINT
       &status("Killing children (INT)");
     local($SIG{CHLD}) = 'IGNORE';   # we're going to kill our children      local($SIG{CHLD}) = 'IGNORE';   # we're going to kill our children
     kill 'INT' => keys %children;      kill 'INT' => keys %children;
     &logthis("Free socket: ".shutdown($server,2)); # free up socket      &logthis("Free socket: ".shutdown($server,2)); # free up socket
     my $execdir=$perlvar{'lonDaemons'};      my $execdir=$perlvar{'lonDaemons'};
     unlink("$execdir/logs/lond.pid");      unlink("$execdir/logs/lond.pid");
     &logthis("<font color=red>CRITICAL: Shutting down</font>");      &logthis("<font color=red>CRITICAL: Shutting down</font>");
       &status("Done killing children");
     exit;                           # clean up with dignity      exit;                           # clean up with dignity
 }  }
   
 sub HUPSMAN {                      # signal handler for SIGHUP  sub HUPSMAN {                      # signal handler for SIGHUP
     local($SIG{CHLD}) = 'IGNORE';  # we're going to kill our children      local($SIG{CHLD}) = 'IGNORE';  # we're going to kill our children
       &status("Killing children for restart (HUP)");
     kill 'INT' => keys %children;      kill 'INT' => keys %children;
     &logthis("Free socket: ".shutdown($server,2)); # free up socket      &logthis("Free socket: ".shutdown($server,2)); # free up socket
     &logthis("<font color=red>CRITICAL: Restarting</font>");      &logthis("<font color=red>CRITICAL: Restarting</font>");
     my $execdir=$perlvar{'lonDaemons'};      my $execdir=$perlvar{'lonDaemons'};
     unlink("$execdir/logs/lond.pid");      unlink("$execdir/logs/lond.pid");
       &status("Restarting self (HUP)");
     exec("$execdir/lond");         # here we go again      exec("$execdir/lond");         # here we go again
 }  }
   
Line 679  sub ReloadApache { Line 3516  sub ReloadApache {
 #     now be honored.  #     now be honored.
 #  #
 sub UpdateHosts {  sub UpdateHosts {
       &status("Reload hosts.tab");
     logthis('<font color="blue"> Updating connections </font>');      logthis('<font color="blue"> Updating connections </font>');
     #      #
     #  The %children hash has the set of IP's we currently have children      #  The %children hash has the set of IP's we currently have children
Line 703  sub UpdateHosts { Line 3541  sub UpdateHosts {
  }   }
     }      }
     ReloadApache;      ReloadApache;
       &status("Finished reloading hosts.tab");
 }  }
   
   
 sub checkchildren {  sub checkchildren {
       &status("Checking on the children (sending signals)");
     &initnewstatus();      &initnewstatus();
     &logstatus();      &logstatus();
     &logthis('Going to check on the children');      &logthis('Going to check on the children');
Line 721  sub checkchildren { Line 3561  sub checkchildren {
     sleep 5;      sleep 5;
     $SIG{ALRM} = sub { die "timeout" };      $SIG{ALRM} = sub { die "timeout" };
     $SIG{__DIE__} = 'DEFAULT';      $SIG{__DIE__} = 'DEFAULT';
       &status("Checking on the children (waiting for reports)");
     foreach (sort keys %children) {      foreach (sort keys %children) {
         unless (-e "$docdir/lon-status/londchld/$_.txt") {          unless (-e "$docdir/lon-status/londchld/$_.txt") {
           eval {      eval {
             alarm(300);   alarm(300);
     &logthis('Child '.$_.' did not respond');   &logthis('Child '.$_.' did not respond');
     kill 9 => $_;   kill 9 => $_;
     #$emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}";   #$emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}";
     #$subj="LON: $currenthostid killed lond process $_";   #$subj="LON: $currenthostid killed lond process $_";
     #my $result=`echo 'Killed lond process $_.' | mailto $emailto -s '$subj' > /dev/null`;   #my $result=`echo 'Killed lond process $_.' | mailto $emailto -s '$subj' > /dev/null`;
     #$execdir=$perlvar{'lonDaemons'};   #$execdir=$perlvar{'lonDaemons'};
     #$result=`/bin/cp $execdir/logs/lond.log $execdir/logs/lond.log.$_`;   #$result=`/bin/cp $execdir/logs/lond.log $execdir/logs/lond.log.$_`;
     alarm(0);   alarm(0);
   }      }
         }          }
     }      }
     $SIG{ALRM} = 'DEFAULT';      $SIG{ALRM} = 'DEFAULT';
     $SIG{__DIE__} = \&catchexception;      $SIG{__DIE__} = \&catchexception;
       &status("Finished checking children");
 }  }
   
 # --------------------------------------------------------------------- Logging  # --------------------------------------------------------------------- Logging
Line 759  sub Debug { Line 3601  sub Debug {
  &logthis($message);   &logthis($message);
     }      }
 }  }
   
   #
   #   Sub to do replies to client.. this gives a hook for some
   #   debug tracing too:
   #  Parameters:
   #     fd      - File open on client.
   #     reply   - Text to send to client.
   #     request - Original request from client.
   #
   #  Note: This increments Transactions
   #
   sub Reply {
       alarm(120);
       my $fd      = shift;
       my $reply   = shift;
       my $request = shift;
   
       print $fd $reply;
       Debug("Request was $request  Reply was $reply");
   
       $Transactions++;
       alarm(0);
   
   
   }
   #
   #    Sub to report a failure.
   #    This function:
   #     -   Increments the failure statistic counters.
   #     -   Invokes Reply to send the error message to the client.
   # Parameters:
   #    fd       - File descriptor open on the client
   #    reply    - Reply text to emit.
   #    request  - The original request message (used by Reply
   #               to debug if that's enabled.
   # Implicit outputs:
   #    $Failures- The number of failures is incremented.
   #    Reply (invoked here) sends a message to the 
   #    client:
   #
   sub Failure {
       my $fd      = shift;
       my $reply   = shift;
       my $request = shift;
      
       $Failures++;
       Reply($fd, $reply, $request);      # That's simple eh?
   }
 # ------------------------------------------------------------------ Log status  # ------------------------------------------------------------------ Log status
   
 sub logstatus {  sub logstatus {
       &status("Doing logging");
     my $docdir=$perlvar{'lonDocRoot'};      my $docdir=$perlvar{'lonDocRoot'};
     {      {
     my $fh=IO::File->new(">>$docdir/lon-status/londstatus.txt");   my $fh=IO::File->new(">>$docdir/lon-status/londstatus.txt");
     print $fh $$."\t".$currenthostid."\t".$status."\t".$lastlog."\n";   print $fh $$."\t".$currenthostid."\t".$status."\t".$lastlog."\n";
     $fh->close();   $fh->close();
     }      }
       &status("Finished londstatus.txt");
     {      {
  my $fh=IO::File->new(">$docdir/lon-status/londchld/$$.txt");   my $fh=IO::File->new(">$docdir/lon-status/londchld/$$.txt");
         print $fh $status."\n".$lastlog."\n".time;   print $fh $status."\n".$lastlog."\n".time;
         $fh->close();   $fh->close();
     }      }
       ResetStatistics;
       &status("Finished logging");
      
 }  }
   
 sub initnewstatus {  sub initnewstatus {
Line 794  sub status { Line 3689  sub status {
     my $what=shift;      my $what=shift;
     my $now=time;      my $now=time;
     my $local=localtime($now);      my $local=localtime($now);
     $status=$local.': '.$what;      my $status = "lond: $what $local ";
     $0='lond: '.$what.' '.$local;      if($Transactions) {
    $status .= " Transactions: $Transactions Failed; $Failures";
       }
       $0=$status;
 }  }
   
 # -------------------------------------------------------- Escape Special Chars  # -------------------------------------------------------- Escape Special Chars
Line 827  sub reconlonc { Line 3725  sub reconlonc {
     &logthis("lonc at pid $loncpid responding, sending USR1");      &logthis("lonc at pid $loncpid responding, sending USR1");
             kill USR1 => $loncpid;              kill USR1 => $loncpid;
         } else {          } else {
     &logthis(      &logthis("<font color=red>CRITICAL: "
               "<font color=red>CRITICAL: "       ."lonc at pid $loncpid not responding, giving up</font>");
              ."lonc at pid $loncpid not responding, giving up</font>");  
         }          }
     } else {      } else {
       &logthis('<font color=red>CRITICAL: lonc not running, giving up</font>');   &logthis('<font color=red>CRITICAL: lonc not running, giving up</font>');
     }      }
 }  }
   
Line 844  sub subreply { Line 3741  sub subreply {
     my $sclient=IO::Socket::UNIX->new(Peer    =>"$peerfile",      my $sclient=IO::Socket::UNIX->new(Peer    =>"$peerfile",
                                       Type    => SOCK_STREAM,                                        Type    => SOCK_STREAM,
                                       Timeout => 10)                                        Timeout => 10)
        or return "con_lost";   or return "con_lost";
     print $sclient "$cmd\n";      print $sclient "$cmd\n";
     my $answer=<$sclient>;      my $answer=<$sclient>;
     chomp($answer);      chomp($answer);
Line 853  sub subreply { Line 3750  sub subreply {
 }  }
   
 sub reply {  sub reply {
   my ($cmd,$server)=@_;      my ($cmd,$server)=@_;
   my $answer;      my $answer;
   if ($server ne $currenthostid) {       if ($server ne $currenthostid) { 
     $answer=subreply($cmd,$server);   $answer=subreply($cmd,$server);
     if ($answer eq 'con_lost') {   if ($answer eq 'con_lost') {
  $answer=subreply("ping",$server);      $answer=subreply("ping",$server);
         if ($answer ne $server) {      if ($answer ne $server) {
     &logthis("sub reply: answer != server answer is $answer, server is $server");   &logthis("sub reply: answer != server answer is $answer, server is $server");
            &reconlonc("$perlvar{'lonSockDir'}/$server");   &reconlonc("$perlvar{'lonSockDir'}/$server");
         }      }
         $answer=subreply($cmd,$server);      $answer=subreply($cmd,$server);
     }   }
   } else {      } else {
     $answer='self_reply';   $answer='self_reply';
   }       } 
   return $answer;      return $answer;
 }  }
   
 # -------------------------------------------------------------- Talk to lonsql  # -------------------------------------------------------------- Talk to lonsql
Line 887  sub subsqlreply { Line 3784  sub subsqlreply {
     my $sclient=IO::Socket::UNIX->new(Peer    =>"$peerfile",      my $sclient=IO::Socket::UNIX->new(Peer    =>"$peerfile",
                                       Type    => SOCK_STREAM,                                        Type    => SOCK_STREAM,
                                       Timeout => 10)                                        Timeout => 10)
        or return "con_lost";   or return "con_lost";
     print $sclient "$cmd\n";      print $sclient "$cmd\n";
     my $answer=<$sclient>;      my $answer=<$sclient>;
     chomp($answer);      chomp($answer);
Line 899  sub subsqlreply { Line 3796  sub subsqlreply {
   
 sub propath {  sub propath {
     my ($udom,$uname)=@_;      my ($udom,$uname)=@_;
       Debug("Propath:$udom:$uname");
     $udom=~s/\W//g;      $udom=~s/\W//g;
     $uname=~s/\W//g;      $uname=~s/\W//g;
       Debug("Propath2:$udom:$uname");
     my $subdir=$uname.'__';      my $subdir=$uname.'__';
     $subdir =~ s/(.)(.)(.).*/$1\/$2\/$3/;      $subdir =~ s/(.)(.)(.).*/$1\/$2\/$3/;
     my $proname="$perlvar{'lonUsersDir'}/$udom/$subdir/$uname";      my $proname="$perlvar{'lonUsersDir'}/$udom/$subdir/$uname";
       Debug("Propath returning $proname");
     return $proname;      return $proname;
 }   } 
   
Line 954  $SIG{USR2} = \&UpdateHosts; Line 3854  $SIG{USR2} = \&UpdateHosts;
   
 ReadHostTable;  ReadHostTable;
   
   
 # --------------------------------------------------------------  # --------------------------------------------------------------
 #   Accept connections.  When a connection comes in, it is validated  #   Accept connections.  When a connection comes in, it is validated
 #   and if good, a child process is created to process transactions  #   and if good, a child process is created to process transactions
 #   along the connection.  #   along the connection.
   
 while (1) {  while (1) {
       &status('Starting accept');
     $client = $server->accept() or next;      $client = $server->accept() or next;
       &status('Accepted '.$client.' off to spawn');
     make_new_child($client);      make_new_child($client);
       &status('Finished spawning');
 }  }
   
 sub make_new_child {  sub make_new_child {
     my $pid;      my $pid;
     my $cipher;  
     my $sigset;      my $sigset;
   
     $client = shift;      $client = shift;
     &logthis("Attempting to start child");          &status('Starting new child '.$client);
       &logthis('<font color="green"> Attempting to start child ('.$client.
        ")</font>");    
     # block signal for fork      # block signal for fork
     $sigset = POSIX::SigSet->new(SIGINT);      $sigset = POSIX::SigSet->new(SIGINT);
     sigprocmask(SIG_BLOCK, $sigset)      sigprocmask(SIG_BLOCK, $sigset)
         or die "Can't block SIGINT for fork: $!\n";          or die "Can't block SIGINT for fork: $!\n";
       
     die "fork: $!" unless defined ($pid = fork);      die "fork: $!" unless defined ($pid = fork);
   
     $client->sockopt(SO_KEEPALIVE, 1); # Enable monitoring of      $client->sockopt(SO_KEEPALIVE, 1); # Enable monitoring of
Line 1011  sub make_new_child { Line 3916  sub make_new_child {
         sigprocmask(SIG_UNBLOCK, $sigset)          sigprocmask(SIG_UNBLOCK, $sigset)
             or die "Can't unblock SIGINT for fork: $!\n";              or die "Can't unblock SIGINT for fork: $!\n";
   
         my $tmpsnum=0;  
 #---------------------------------------------------- kerberos 5 initialization  
         &Authen::Krb5::init_context();          &Authen::Krb5::init_context();
         &Authen::Krb5::init_ets();          &Authen::Krb5::init_ets();
   
             &status('Accepted connection');   &status('Accepted connection');
 # =============================================================================  # =============================================================================
             # do something with the connection              # do something with the connection
 # -----------------------------------------------------------------------------  # -----------------------------------------------------------------------------
  # see if we know client and check for spoof IP by challenge   # see if we know client and check for spoof IP by challenge
   
             my $clientrec=($hostid{$clientip} ne undef);   ReadManagerTable; # May also be a manager!!
             &logthis(  
 "<font color=yellow>INFO: Connection, $clientip ($hostid{$clientip})</font>"   my $clientrec=($hostid{$clientip}     ne undef);
             );   my $ismanager=($managers{$clientip}    ne undef);
             &status("Connecting $clientip ($hostid{$clientip})");    $clientname  = "[unknonwn]";
             my $clientok;   if($clientrec) { # Establish client type.
             if ($clientrec) {      $ConnectionType = "client";
       &status("Waiting for init from $clientip ($hostid{$clientip})");      $clientname = $hostid{$clientip};
       my $remotereq=<$client>;      if($ismanager) {
               $remotereq=~s/[^\w:]//g;   $ConnectionType = "both";
               if ($remotereq =~ /^init/) {      }
   &sethost("sethost:$perlvar{'lonHostID'}");   } else {
   my $challenge="$$".time;      $ConnectionType = "manager";
                   print $client "$challenge\n";      $clientname = $managers{$clientip};
                   &status(   }
            "Waiting for challenge reply from $clientip ($hostid{$clientip})");    my $clientok;
                   $remotereq=<$client>;   if ($clientrec || $ismanager) {
                   $remotereq=~s/\W//g;      &status("Waiting for init from $clientip $clientname");
                   if ($challenge eq $remotereq) {      &logthis('<font color="yellow">INFO: Connection, '.
       $clientok=1;       $clientip.
                       print $client "ok\n";       " ($clientname) connection type = $ConnectionType </font>" );
                   } else {      &status("Connecting $clientip  ($clientname))"); 
       &logthis(      my $remotereq=<$client>;
  "<font color=blue>WARNING: $clientip did not reply challenge</font>");      $remotereq=~s/[^\w:]//g;
                       &status('No challenge reply '.$clientip);      if ($remotereq =~ /^init/) {
                   }   &sethost("sethost:$perlvar{'lonHostID'}");
               } else {   my $challenge="$$".time;
   &logthis(   print $client "$challenge\n";
                     "<font color=blue>WARNING: "   &status("Waiting for challenge reply from $clientip ($clientname)"); 
                    ."$clientip failed to initialize: >$remotereq< </font>");   $remotereq=<$client>;
                   &status('No init '.$clientip);   $remotereq=~s/\W//g;
               }   if ($challenge eq $remotereq) {
       $clientok=1;
       print $client "ok\n";
    } else {
       &logthis("<font color=blue>WARNING: $clientip did not reply challenge</font>");
       &status('No challenge reply '.$clientip);
    }
     } else {      } else {
               &logthis(   &logthis("<font color=blue>WARNING: "
  "<font color=blue>WARNING: Unknown client $clientip</font>");   ."$clientip failed to initialize: >$remotereq< </font>");
               &status('Hung up on '.$clientip);   &status('No init '.$clientip);
             }      }
             if ($clientok) {   } else {
       &logthis("<font color=blue>WARNING: Unknown client $clientip</font>");
       &status('Hung up on '.$clientip);
    }
    if ($clientok) {
 # ---------------- New known client connecting, could mean machine online again  # ---------------- New known client connecting, could mean machine online again
       
  foreach my $id (keys(%hostip)) {      foreach my $id (keys(%hostip)) {
     if ($hostip{$id} ne $clientip ||   if ($hostip{$id} ne $clientip ||
        $hostip{$currenthostid} eq $clientip) {      $hostip{$currenthostid} eq $clientip) {
  # no need to try to do recon's to myself      # no need to try to do recon's to myself
  next;      next;
     }  
     &reconlonc("$perlvar{'lonSockDir'}/$id");  
  }   }
  &logthis("<font color=green>Established connection: $hostid{$clientip}</font>");   &reconlonc("$perlvar{'lonSockDir'}/$id");
               &status('Will listen to '.$hostid{$clientip});      }
       &logthis("<font color=green>Established connection: $clientname</font>");
       &status('Will listen to '.$clientname);
   
       ResetStatistics();
   
 # ------------------------------------------------------------ Process requests  # ------------------------------------------------------------ Process requests
               while (my $userinput=<$client>) {      my $KeepGoing = 1;
                 chomp($userinput);      while ((my $userinput=GetRequest) && $KeepGoing) {
  Debug("Request = $userinput\n");   $KeepGoing = ProcessRequest($userinput);
                 &status('Processing '.$hostid{$clientip}.': '.$userinput);  
                 my $wasenc=0;  
                 alarm(120);  
 # ------------------------------------------------------------ See if encrypted  
  if ($userinput =~ /^enc/) {  
   if ($cipher) {  
                     my ($cmd,$cmdlength,$encinput)=split(/:/,$userinput);  
     $userinput='';  
                     for (my $encidx=0;$encidx<length($encinput);$encidx+=16) {  
                        $userinput.=  
    $cipher->decrypt(  
                             pack("H16",substr($encinput,$encidx,16))  
                            );  
     }  
     $userinput=substr($userinput,0,$cmdlength);  
                     $wasenc=1;  
  }  
       }  
     
 # ------------------------------------------------------------- Normal commands  
 # ------------------------------------------------------------------------ ping  
    if ($userinput =~ /^ping/) {  
                        print $client "$currenthostid\n";  
 # ------------------------------------------------------------------------ pong  
    }elsif ($userinput =~ /^pong/) {  
                        my $reply=&reply("ping",$hostid{$clientip});  
                        print $client "$currenthostid:$reply\n";   
 # ------------------------------------------------------------------------ ekey  
    } elsif ($userinput =~ /^ekey/) {  
                        my $buildkey=time.$$.int(rand 100000);  
                        $buildkey=~tr/1-6/A-F/;  
                        $buildkey=int(rand 100000).$buildkey.int(rand 100000);  
                        my $key=$currenthostid.$hostid{$clientip};  
                        $key=~tr/a-z/A-Z/;  
                        $key=~tr/G-P/0-9/;  
                        $key=~tr/Q-Z/0-9/;  
                        $key=$key.$buildkey.$key.$buildkey.$key.$buildkey;  
                        $key=substr($key,0,32);  
                        my $cipherkey=pack("H32",$key);  
                        $cipher=new IDEA $cipherkey;  
                        print $client "$buildkey\n";   
 # ------------------------------------------------------------------------ load  
    } elsif ($userinput =~ /^load/) {  
                        my $loadavg;  
                        {  
                           my $loadfile=IO::File->new('/proc/loadavg');  
                           $loadavg=<$loadfile>;  
                        }  
                        $loadavg =~ s/\s.*//g;  
        my $loadpercent=100*$loadavg/$perlvar{'lonLoadLim'};  
        print $client "$loadpercent\n";  
 # -------------------------------------------------------------------- userload  
    } elsif ($userinput =~ /^userload/) {  
        my $userloadpercent=&userload();  
        print $client "$userloadpercent\n";  
   
 #  
 #        Transactions requiring encryption:  
 #  
 # ----------------------------------------------------------------- currentauth  
    } elsif ($userinput =~ /^currentauth/) {  
      if ($wasenc==1) {  
                        my ($cmd,$udom,$uname)=split(/:/,$userinput);  
        my $result = GetAuthType($udom, $uname);  
        if($result eq "nouser") {  
    print $client "unknown_user\n";  
        }  
        else {  
    print $client "$result\n"  
        }  
      } else {  
        print $client "refused\n";  
      }  
 #--------------------------------------------------------------------- pushfile  
    } elsif($userinput =~ /^pushfile/) {   
        if($wasenc == 1) {  
    my $cert = GetCertificate($userinput);  
    if(ValidManager($cert)) {  
        my $reply = PushFile($userinput);  
        print $client "$reply\n";  
    } else {  
        print $client "refused\n";  
    }   
        } else {  
    print $client "refused\n";  
        }  
 #--------------------------------------------------------------------- reinit  
    } elsif($userinput =~ /^reinit/) {  
        if ($wasenc == 1) {  
    my $cert = GetCertificate($userinput);  
    if(ValidManager($cert)) {  
        chomp($userinput);  
        my $reply = ReinitProcess($userinput);  
        print $client  "$reply\n";  
    } else {  
        print $client "refused\n";  
    }  
        } else {  
    print $client "refused\n";  
        }  
 # ------------------------------------------------------------------------ auth  
                    } elsif ($userinput =~ /^auth/) {  
      if ($wasenc==1) {  
                        my ($cmd,$udom,$uname,$upass)=split(/:/,$userinput);  
                        chomp($upass);  
                        $upass=unescape($upass);  
                        my $proname=propath($udom,$uname);  
                        my $passfilename="$proname/passwd";  
                        if (-e $passfilename) {  
                           my $pf = IO::File->new($passfilename);  
                           my $realpasswd=<$pf>;  
                           chomp($realpasswd);  
                           my ($howpwd,$contentpwd)=split(/:/,$realpasswd);  
                           my $pwdcorrect=0;  
                           if ($howpwd eq 'internal') {  
       &Debug("Internal auth");  
       $pwdcorrect=  
   (crypt($upass,$contentpwd) eq $contentpwd);  
                           } elsif ($howpwd eq 'unix') {  
       &Debug("Unix auth");  
                               if((getpwnam($uname))[1] eq "") { #no such user!  
   $pwdcorrect = 0;  
       } else {  
   $contentpwd=(getpwnam($uname))[1];  
   my $pwauth_path="/usr/local/sbin/pwauth";  
   unless ($contentpwd eq 'x') {  
       $pwdcorrect=  
   (crypt($upass,$contentpwd) eq   
    $contentpwd);  
   }  
     
       elsif (-e $pwauth_path) {  
   open PWAUTH, "|$pwauth_path" or  
       die "Cannot invoke authentication";  
   print PWAUTH "$uname\n$upass\n";  
   close PWAUTH;  
   $pwdcorrect=!$?;  
       }  
       }  
                           } elsif ($howpwd eq 'krb4') {  
                               my $null=pack("C",0);  
                               unless ($upass=~/$null/) {  
                                   my $krb4_error = &Authen::Krb4::get_pw_in_tkt  
                                       ($uname,"",$contentpwd,'krbtgt',  
                                        $contentpwd,1,$upass);  
                                   if (!$krb4_error) {  
                                       $pwdcorrect = 1;  
                                   } else {   
                                       $pwdcorrect=0;   
                                       # log error if it is not a bad password  
                                       if ($krb4_error != 62) {  
        &logthis('krb4:'.$uname.','.$contentpwd.','.  
                 &Authen::Krb4::get_err_txt($Authen::Krb4::error));  
                                       }  
                                   }  
                               }  
                           } elsif ($howpwd eq 'krb5') {  
       my $null=pack("C",0);  
       unless ($upass=~/$null/) {  
   my $krbclient=&Authen::Krb5::parse_name($uname.'@'.$contentpwd);  
   my $krbservice="krbtgt/".$contentpwd."\@".$contentpwd;  
   my $krbserver=&Authen::Krb5::parse_name($krbservice);  
   my $credentials=&Authen::Krb5::cc_default();  
   $credentials->initialize($krbclient);  
   my $krbreturn =   
     &Authen::Krb5::get_in_tkt_with_password(  
      $krbclient,$krbserver,$upass,$credentials);  
 #  unless ($krbreturn) {  
 #      &logthis("Krb5 Error: ".  
 #       &Authen::Krb5::error());  
 #  }  
   $pwdcorrect = ($krbreturn == 1);  
    } else { $pwdcorrect=0; }  
                           } elsif ($howpwd eq 'localauth') {  
     $pwdcorrect=&localauth::localauth($uname,$upass,  
       $contentpwd);  
   }  
                           if ($pwdcorrect) {  
                              print $client "authorized\n";  
                           } else {  
                              print $client "non_authorized\n";  
                           }    
        } else {  
                           print $client "unknown_user\n";  
                        }  
      } else {  
        print $client "refused\n";  
      }  
 # ---------------------------------------------------------------------- passwd  
                    } elsif ($userinput =~ /^passwd/) {  
      if ($wasenc==1) {  
                        my   
                        ($cmd,$udom,$uname,$upass,$npass)=split(/:/,$userinput);  
                        chomp($npass);  
                        $upass=&unescape($upass);  
                        $npass=&unescape($npass);  
        &Debug("Trying to change password for $uname");  
        my $proname=propath($udom,$uname);  
                        my $passfilename="$proname/passwd";  
                        if (-e $passfilename) {  
    my $realpasswd;  
                           { my $pf = IO::File->new($passfilename);  
     $realpasswd=<$pf>; }  
                           chomp($realpasswd);  
                           my ($howpwd,$contentpwd)=split(/:/,$realpasswd);  
                           if ($howpwd eq 'internal') {  
    &Debug("internal auth");  
    if (crypt($upass,$contentpwd) eq $contentpwd) {  
      my $salt=time;  
                              $salt=substr($salt,6,2);  
      my $ncpass=crypt($npass,$salt);  
                              {  
  my $pf;  
  if ($pf = IO::File->new(">$passfilename")) {  
      print $pf "internal:$ncpass\n";  
      &logthis("Result of password change for $uname: pwchange_success");  
      print $client "ok\n";  
  } else {  
      &logthis("Unable to open $uname passwd to change password");  
      print $client "non_authorized\n";  
  }  
      }               
        
                            } else {  
                              print $client "non_authorized\n";  
                            }  
                           } elsif ($howpwd eq 'unix') {  
       # Unix means we have to access /etc/password  
       # one way or another.  
       # First: Make sure the current password is  
       #        correct  
       &Debug("auth is unix");  
       $contentpwd=(getpwnam($uname))[1];  
       my $pwdcorrect = "0";  
       my $pwauth_path="/usr/local/sbin/pwauth";  
       unless ($contentpwd eq 'x') {  
   $pwdcorrect=  
                                     (crypt($upass,$contentpwd) eq $contentpwd);  
       } elsif (-e $pwauth_path) {  
   open PWAUTH, "|$pwauth_path" or  
       die "Cannot invoke authentication";  
   print PWAUTH "$uname\n$upass\n";  
   close PWAUTH;  
   &Debug("exited pwauth with $? ($uname,$upass) ");  
   $pwdcorrect=($? == 0);  
       }  
      if ($pwdcorrect) {  
  my $execdir=$perlvar{'lonDaemons'};  
  &Debug("Opening lcpasswd pipeline");  
  my $pf = IO::File->new("|$execdir/lcpasswd > $perlvar{'lonDaemons'}/logs/lcpasswd.log");  
  print $pf "$uname\n$npass\n$npass\n";  
  close $pf;  
  my $err = $?;  
  my $result = ($err>0 ? 'pwchange_failure'   
        : 'ok');  
  &logthis("Result of password change for $uname: ".  
   &lcpasswdstrerror($?));  
  print $client "$result\n";  
      } else {  
  print $client "non_authorized\n";  
      }  
   } else {  
                             print $client "auth_mode_error\n";  
                           }    
        } else {  
                           print $client "unknown_user\n";  
                        }  
      } else {  
        print $client "refused\n";  
      }  
 # -------------------------------------------------------------------- makeuser  
                    } elsif ($userinput =~ /^makeuser/) {  
      &Debug("Make user received");  
                 my $oldumask=umask(0077);  
      if ($wasenc==1) {  
                        my   
                        ($cmd,$udom,$uname,$umode,$npass)=split(/:/,$userinput);  
        &Debug("cmd =".$cmd." $udom =".$udom.  
     " uname=".$uname);  
                        chomp($npass);  
                        $npass=&unescape($npass);  
                        my $proname=propath($udom,$uname);  
                        my $passfilename="$proname/passwd";  
        &Debug("Password file created will be:".  
     $passfilename);  
                        if (-e $passfilename) {  
    print $client "already_exists\n";  
                        } elsif ($udom ne $currentdomainid) {  
                            print $client "not_right_domain\n";  
                        } else {  
                            my @fpparts=split(/\//,$proname);  
                            my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2];  
                            my $fperror='';  
                            for (my $i=3;$i<=$#fpparts;$i++) {  
                                $fpnow.='/'.$fpparts[$i];   
                                unless (-e $fpnow) {  
    unless (mkdir($fpnow,0777)) {  
                                       $fperror="error: ".($!+0)  
   ." mkdir failed while attempting "  
                                               ."makeuser\n";  
                                    }  
                                }  
                            }  
                            unless ($fperror) {  
        my $result=&make_passwd_file($uname, $umode,$npass,  
     $passfilename);  
        print $client $result;  
                            } else {  
                                print $client "$fperror\n";  
                            }  
                        }  
      } else {  
        print $client "refused\n";  
      }  
      umask($oldumask);  
 # -------------------------------------------------------------- changeuserauth  
                    } elsif ($userinput =~ /^changeuserauth/) {  
        &Debug("Changing authorization");  
       if ($wasenc==1) {  
                        my   
        ($cmd,$udom,$uname,$umode,$npass)=split(/:/,$userinput);  
                        chomp($npass);  
        &Debug("cmd = ".$cmd." domain= ".$udom.  
       "uname =".$uname." umode= ".$umode);  
                        $npass=&unescape($npass);  
                        my $proname=&propath($udom,$uname);  
                        my $passfilename="$proname/passwd";  
        if ($udom ne $currentdomainid) {  
                            print $client "not_right_domain\n";  
                        } else {  
    my $result=&make_passwd_file($uname, $umode,$npass,  
  $passfilename);  
    print $client $result;  
                        }  
      } else {  
        print $client "refused\n";  
      }  
 # ------------------------------------------------------------------------ home  
                    } elsif ($userinput =~ /^home/) {  
                        my ($cmd,$udom,$uname)=split(/:/,$userinput);  
                        chomp($uname);  
                        my $proname=propath($udom,$uname);  
                        if (-e $proname) {  
                           print $client "found\n";  
                        } else {  
   print $client "not_found\n";  
                        }  
 # ---------------------------------------------------------------------- update  
                    } elsif ($userinput =~ /^update/) {  
                        my ($cmd,$fname)=split(/:/,$userinput);  
                        my $ownership=ishome($fname);  
                        if ($ownership eq 'not_owner') {  
                         if (-e $fname) {  
                           my ($dev,$ino,$mode,$nlink,  
                               $uid,$gid,$rdev,$size,  
                               $atime,$mtime,$ctime,  
                               $blksize,$blocks)=stat($fname);  
                           my $now=time;  
                           my $since=$now-$atime;  
                           if ($since>$perlvar{'lonExpire'}) {  
                               my $reply=  
                                     &reply("unsub:$fname","$hostid{$clientip}");  
                               unlink("$fname");  
                           } else {  
      my $transname="$fname.in.transfer";  
                              my $remoteurl=  
                                     reply("sub:$fname","$hostid{$clientip}");  
                              my $response;  
                               {  
                              my $ua=new LWP::UserAgent;  
                              my $request=new HTTP::Request('GET',"$remoteurl");  
                              $response=$ua->request($request,$transname);  
       }  
                              if ($response->is_error()) {  
  unlink($transname);  
                                  my $message=$response->status_line;  
                                  &logthis(  
                                   "LWP GET: $message for $fname ($remoteurl)");  
                              } else {  
                          if ($remoteurl!~/\.meta$/) {  
                                   my $ua=new LWP::UserAgent;  
                                   my $mrequest=  
                                    new HTTP::Request('GET',$remoteurl.'.meta');  
                                   my $mresponse=  
                                    $ua->request($mrequest,$fname.'.meta');  
                                   if ($mresponse->is_error()) {  
                     unlink($fname.'.meta');  
                                   }  
                          }  
                                  rename($transname,$fname);  
      }  
                           }  
                           print $client "ok\n";  
                         } else {  
                           print $client "not_found\n";  
                         }  
        } else {  
  print $client "rejected\n";  
                        }  
 # -------------------------------------- fetch a user file from a remote server  
                    } elsif ($userinput =~ /^fetchuserfile/) {  
        my ($cmd,$fname)=split(/:/,$userinput);  
        my ($udom,$uname,$ufile)=split(/\//,$fname);  
        my $udir=propath($udom,$uname).'/userfiles';  
        unless (-e $udir) { mkdir($udir,0770); }  
                        if (-e $udir) {  
    $ufile=~s/^[\.\~]+//;  
    $ufile=~s/\///g;  
    my $destname=$udir.'/'.$ufile;  
    my $transname=$udir.'/'.$ufile.'.in.transit';  
    my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;  
    my $response;  
    {  
        my $ua=new LWP::UserAgent;  
        my $request=new HTTP::Request('GET',"$remoteurl");  
        $response=$ua->request($request,$transname);  
    }  
    if ($response->is_error()) {  
        unlink($transname);  
        my $message=$response->status_line;  
        &logthis("LWP GET: $message for $fname ($remoteurl)");  
        print $client "failed\n";  
    } else {  
        if (!rename($transname,$destname)) {  
    &logthis("Unable to move $transname to $destname");  
    unlink($transname);  
    print $client "failed\n";  
        } else {  
    print $client "ok\n";  
        }  
    }  
        } else {  
    print $client "not_home\n";  
        }  
 # ------------------------------------------ authenticate access to a user file  
                    } elsif ($userinput =~ /^tokenauthuserfile/) {  
                        my ($cmd,$fname,$session)=split(/:/,$userinput);  
                        chomp($session);  
                        my $reply='non_auth';  
                        if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'.  
  $session.'.id')) {  
    while (my $line=<ENVIN>) {  
        if ($line=~/userfile\.$fname\=/) { $reply='ok'; }  
    }  
    close(ENVIN);  
    print $client $reply."\n";  
        } else {  
    print $client "invalid_token\n";  
                        }  
 # ----------------------------------------------------------------- unsubscribe  
                    } elsif ($userinput =~ /^unsub/) {  
                        my ($cmd,$fname)=split(/:/,$userinput);  
                        if (-e $fname) {  
    print $client &unsub($client,$fname,$clientip);  
                        } else {  
    print $client "not_found\n";  
                        }  
 # ------------------------------------------------------------------- subscribe  
                    } elsif ($userinput =~ /^sub/) {  
        print $client &subscribe($userinput,$clientip);  
 # ------------------------------------------------------------- current version  
                    } elsif ($userinput =~ /^currentversion/) {  
                        my ($cmd,$fname)=split(/:/,$userinput);  
        print $client &currentversion($fname)."\n";  
 # ------------------------------------------------------------------------- log  
                    } elsif ($userinput =~ /^log/) {  
                        my ($cmd,$udom,$uname,$what)=split(/:/,$userinput);  
                        chomp($what);  
                        my $proname=propath($udom,$uname);  
                        my $now=time;  
                        {  
  my $hfh;  
  if ($hfh=IO::File->new(">>$proname/activity.log")) {   
                             print $hfh "$now:$hostid{$clientip}:$what\n";  
                             print $client "ok\n";   
  } else {  
                             print $client "error: ".($!+0)  
  ." IO::File->new Failed "  
                                     ."while attempting log\n";  
         }  
        }  
 # ------------------------------------------------------------------------- put  
                    } elsif ($userinput =~ /^put/) {  
                       my ($cmd,$udom,$uname,$namespace,$what)  
                           =split(/:/,$userinput);  
                       $namespace=~s/\//\_/g;  
                       $namespace=~s/\W//g;  
                       if ($namespace ne 'roles') {  
                        chomp($what);  
                        my $proname=propath($udom,$uname);  
                        my $now=time;  
                        unless ($namespace=~/^nohist\_/) {  
    my $hfh;  
    if (  
                              $hfh=IO::File->new(">>$proname/$namespace.hist")  
        ) { print $hfh "P:$now:$what\n"; }  
        }  
                        my @pairs=split(/\&/,$what);  
        my %hash;  
        if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  
                            foreach my $pair (@pairs) {  
        my ($key,$value)=split(/=/,$pair);  
                                $hash{$key}=$value;  
                            }  
    if (untie(%hash)) {  
                               print $client "ok\n";  
                            } else {  
                               print $client "error: ".($!+0)  
   ." untie(GDBM) failed ".  
                                       "while attempting put\n";  
                            }  
                        } else {  
                            print $client "error: ".($!)  
        ." tie(GDBM) Failed ".  
                                    "while attempting put\n";  
                        }  
       } else {  
                           print $client "refused\n";  
                       }  
 # -------------------------------------------------------------------- rolesput  
                    } elsif ($userinput =~ /^rolesput/) {  
        &Debug("rolesput");  
     if ($wasenc==1) {  
                        my ($cmd,$exedom,$exeuser,$udom,$uname,$what)  
                           =split(/:/,$userinput);  
        &Debug("cmd = ".$cmd." exedom= ".$exedom.  
     "user = ".$exeuser." udom=".$udom.  
     "what = ".$what);  
                        my $namespace='roles';  
                        chomp($what);  
                        my $proname=propath($udom,$uname);  
                        my $now=time;  
                        {  
    my $hfh;  
    if (  
                              $hfh=IO::File->new(">>$proname/$namespace.hist")  
        ) {   
                                   print $hfh "P:$now:$exedom:$exeuser:$what\n";  
                                  }  
        }  
                        my @pairs=split(/\&/,$what);  
        my %hash;  
        if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  
                            foreach my $pair (@pairs) {  
        my ($key,$value)=split(/=/,$pair);  
        &ManagePermissions($key, $udom, $uname,  
   &GetAuthType( $udom,   
  $uname));  
                                $hash{$key}=$value;  
                            }  
    if (untie(%hash)) {  
                               print $client "ok\n";  
                            } else {  
                               print $client "error: ".($!+0)  
   ." untie(GDBM) Failed ".  
                                       "while attempting rolesput\n";  
                            }  
                        } else {  
                            print $client "error: ".($!+0)  
        ." tie(GDBM) Failed ".  
                                    "while attempting rolesput\n";  
                        }  
       } else {  
                           print $client "refused\n";  
                       }  
 # -------------------------------------------------------------------- rolesdel  
                    } elsif ($userinput =~ /^rolesdel/) {  
        &Debug("rolesdel");  
     if ($wasenc==1) {  
                        my ($cmd,$exedom,$exeuser,$udom,$uname,$what)  
                           =split(/:/,$userinput);  
        &Debug("cmd = ".$cmd." exedom= ".$exedom.  
     "user = ".$exeuser." udom=".$udom.  
     "what = ".$what);  
                        my $namespace='roles';  
                        chomp($what);  
                        my $proname=propath($udom,$uname);  
                        my $now=time;  
                        {  
    my $hfh;  
    if (  
                              $hfh=IO::File->new(">>$proname/$namespace.hist")  
        ) {   
                                   print $hfh "D:$now:$exedom:$exeuser:$what\n";  
                                  }  
        }  
                        my @rolekeys=split(/\&/,$what);  
        my %hash;  
        if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  
                            foreach my $key (@rolekeys) {  
                                delete $hash{$key};  
                            }  
    if (untie(%hash)) {  
                               print $client "ok\n";  
                            } else {  
                               print $client "error: ".($!+0)  
   ." untie(GDBM) Failed ".  
                                       "while attempting rolesdel\n";  
                            }  
                        } else {  
                            print $client "error: ".($!+0)  
        ." tie(GDBM) Failed ".  
                                    "while attempting rolesdel\n";  
                        }  
       } else {  
                           print $client "refused\n";  
                       }  
 # ------------------------------------------------------------------------- get  
                    } elsif ($userinput =~ /^get/) {  
                        my ($cmd,$udom,$uname,$namespace,$what)  
                           =split(/:/,$userinput);  
                        $namespace=~s/\//\_/g;  
                        $namespace=~s/\W//g;  
                        chomp($what);  
                        my @queries=split(/\&/,$what);  
                        my $proname=propath($udom,$uname);  
                        my $qresult='';  
        my %hash;  
        if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
                            for (my $i=0;$i<=$#queries;$i++) {  
                                $qresult.="$hash{$queries[$i]}&";  
                            }  
    if (untie(%hash)) {  
               $qresult=~s/\&$//;  
                               print $client "$qresult\n";  
                            } else {  
                               print $client "error: ".($!+0)  
   ." untie(GDBM) Failed ".  
                                       "while attempting get\n";  
                            }  
                        } else {  
                            if ($!+0 == 2) {  
                                print $client "error:No such file or ".  
                                    "GDBM reported bad block error\n";  
                            } else {  
                                print $client "error: ".($!+0)  
                                    ." tie(GDBM) Failed ".  
                                        "while attempting get\n";  
                            }  
                        }  
 # ------------------------------------------------------------------------ eget  
                    } elsif ($userinput =~ /^eget/) {  
                        my ($cmd,$udom,$uname,$namespace,$what)  
                           =split(/:/,$userinput);  
                        $namespace=~s/\//\_/g;  
                        $namespace=~s/\W//g;  
                        chomp($what);  
                        my @queries=split(/\&/,$what);  
                        my $proname=propath($udom,$uname);  
                        my $qresult='';  
        my %hash;  
        if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
                            for (my $i=0;$i<=$#queries;$i++) {  
                                $qresult.="$hash{$queries[$i]}&";  
                            }  
    if (untie(%hash)) {  
               $qresult=~s/\&$//;  
                               if ($cipher) {  
                                 my $cmdlength=length($qresult);  
                                 $qresult.="         ";  
                                 my $encqresult='';  
                                 for   
  (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {  
                                  $encqresult.=  
                                  unpack("H16",  
                                  $cipher->encrypt(substr($qresult,$encidx,8)));  
                                 }  
                                 print $client "enc:$cmdlength:$encqresult\n";  
       } else {  
         print $client "error:no_key\n";  
                               }  
                            } else {  
                               print $client "error: ".($!+0)  
   ." untie(GDBM) Failed ".  
                                       "while attempting eget\n";  
                            }  
                        } else {  
                            print $client "error: ".($!+0)  
        ." tie(GDBM) Failed ".  
                                    "while attempting eget\n";  
                        }  
 # ------------------------------------------------------------------------- del  
                    } elsif ($userinput =~ /^del/) {  
                        my ($cmd,$udom,$uname,$namespace,$what)  
                           =split(/:/,$userinput);  
                        $namespace=~s/\//\_/g;  
                        $namespace=~s/\W//g;  
                        chomp($what);  
                        my $proname=propath($udom,$uname);  
                        my $now=time;  
                        unless ($namespace=~/^nohist\_/) {  
    my $hfh;  
    if (  
                              $hfh=IO::File->new(">>$proname/$namespace.hist")  
        ) { print $hfh "D:$now:$what\n"; }  
        }  
                        my @keys=split(/\&/,$what);  
        my %hash;  
        if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  
                            foreach my $key (@keys) {  
                                delete($hash{$key});  
                            }  
    if (untie(%hash)) {  
                               print $client "ok\n";  
                            } else {  
                               print $client "error: ".($!+0)  
   ." untie(GDBM) Failed ".  
                                       "while attempting del\n";  
                            }  
                        } else {  
                            print $client "error: ".($!+0)  
        ." tie(GDBM) Failed ".  
                                    "while attempting del\n";  
                        }  
 # ------------------------------------------------------------------------ keys  
                    } elsif ($userinput =~ /^keys/) {  
                        my ($cmd,$udom,$uname,$namespace)  
                           =split(/:/,$userinput);  
                        $namespace=~s/\//\_/g;  
                        $namespace=~s/\W//g;  
                        my $proname=propath($udom,$uname);  
                        my $qresult='';  
        my %hash;  
        if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
                            foreach my $key (keys %hash) {  
                                $qresult.="$key&";  
                            }  
    if (untie(%hash)) {  
               $qresult=~s/\&$//;  
                               print $client "$qresult\n";  
                            } else {  
                               print $client "error: ".($!+0)  
   ." untie(GDBM) Failed ".  
                                       "while attempting keys\n";  
                            }  
                        } else {  
                            print $client "error: ".($!+0)  
        ." tie(GDBM) Failed ".  
                                    "while attempting keys\n";  
                        }  
 # ----------------------------------------------------------------- dumpcurrent  
                    } elsif ($userinput =~ /^currentdump/) {  
                        my ($cmd,$udom,$uname,$namespace)  
                           =split(/:/,$userinput);  
                        $namespace=~s/\//\_/g;  
                        $namespace=~s/\W//g;  
                        my $qresult='';  
                        my $proname=propath($udom,$uname);  
        my %hash;  
                        if (tie(%hash,'GDBM_File',  
                                "$proname/$namespace.db",  
                                &GDBM_READER(),0640)) {  
                            # Structure of %data:  
                            # $data{$symb}->{$parameter}=$value;  
                            # $data{$symb}->{'v.'.$parameter}=$version;  
                            # since $parameter will be unescaped, we do not  
                            # have to worry about silly parameter names...  
                            my %data = ();  
                            while (my ($key,$value) = each(%hash)) {  
                               my ($v,$symb,$param) = split(/:/,$key);  
                               next if ($v eq 'version' || $symb eq 'keys');  
                               next if (exists($data{$symb}) &&   
                                        exists($data{$symb}->{$param}) &&  
                                        $data{$symb}->{'v.'.$param} > $v);  
                               $data{$symb}->{$param}=$value;  
                               $data{$symb}->{'v.'.$param}=$v;  
                            }  
                            if (untie(%hash)) {  
                              while (my ($symb,$param_hash) = each(%data)) {  
                                while(my ($param,$value) = each (%$param_hash)){  
                                  next if ($param =~ /^v\./);  
                                  $qresult.=$symb.':'.$param.'='.$value.'&';  
                                }  
                              }  
                              chop($qresult);  
                              print $client "$qresult\n";  
                            } else {  
                              print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
                                      "while attempting currentdump\n";  
                            }  
                        } else {  
                            print $client "error: ".($!+0)  
        ." tie(GDBM) Failed ".  
                                       "while attempting currentdump\n";  
                        }  
 # ------------------------------------------------------------------------ dump  
                    } elsif ($userinput =~ /^dump/) {  
                        my ($cmd,$udom,$uname,$namespace,$regexp)  
                           =split(/:/,$userinput);  
                        $namespace=~s/\//\_/g;  
                        $namespace=~s/\W//g;  
                        if (defined($regexp)) {  
                           $regexp=&unescape($regexp);  
        } else {  
                           $regexp='.';  
        }  
                        my $qresult='';  
                        my $proname=propath($udom,$uname);  
        my %hash;  
        if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
                            study($regexp);  
                            while (my ($key,$value) = each(%hash)) {  
                                if ($regexp eq '.') {  
                                    $qresult.=$key.'='.$value.'&';  
                                } else {  
                                    my $unescapeKey = &unescape($key);  
                                    if (eval('$unescapeKey=~/$regexp/')) {  
                                        $qresult.="$key=$value&";  
                                    }  
                                }  
                            }  
                            if (untie(%hash)) {  
                                chop($qresult);  
                                print $client "$qresult\n";  
                            } else {  
                                print $client "error: ".($!+0)  
    ." untie(GDBM) Failed ".  
                                        "while attempting dump\n";  
                            }  
                        } else {  
                            print $client "error: ".($!+0)  
        ." tie(GDBM) Failed ".  
                                       "while attempting dump\n";  
                        }  
 # ----------------------------------------------------------------------- store  
                    } elsif ($userinput =~ /^store/) {  
                       my ($cmd,$udom,$uname,$namespace,$rid,$what)  
                           =split(/:/,$userinput);  
                       $namespace=~s/\//\_/g;  
                       $namespace=~s/\W//g;  
                       if ($namespace ne 'roles') {  
                        chomp($what);  
                        my $proname=propath($udom,$uname);  
                        my $now=time;  
                        unless ($namespace=~/^nohist\_/) {  
    my $hfh;  
    if (  
                              $hfh=IO::File->new(">>$proname/$namespace.hist")  
        ) { print $hfh "P:$now:$rid:$what\n"; }  
        }  
                        my @pairs=split(/\&/,$what);  
        my %hash;  
        if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  
                            my @previouskeys=split(/&/,$hash{"keys:$rid"});  
                            my $key;  
                            $hash{"version:$rid"}++;  
                            my $version=$hash{"version:$rid"};  
                            my $allkeys='';   
                            foreach my $pair (@pairs) {  
        my ($key,$value)=split(/=/,$pair);  
                                $allkeys.=$key.':';  
                                $hash{"$version:$rid:$key"}=$value;  
                            }  
                            $hash{"$version:$rid:timestamp"}=$now;  
                            $allkeys.='timestamp';  
                            $hash{"$version:keys:$rid"}=$allkeys;  
    if (untie(%hash)) {  
                               print $client "ok\n";  
                            } else {  
                               print $client "error: ".($!+0)  
   ." untie(GDBM) Failed ".  
                                       "while attempting store\n";  
                            }  
                        } else {  
                            print $client "error: ".($!+0)  
        ." tie(GDBM) Failed ".  
                                    "while attempting store\n";  
                        }  
       } else {  
                           print $client "refused\n";  
                       }  
 # --------------------------------------------------------------------- restore  
                    } elsif ($userinput =~ /^restore/) {  
                        my ($cmd,$udom,$uname,$namespace,$rid)  
                           =split(/:/,$userinput);  
                        $namespace=~s/\//\_/g;  
                        $namespace=~s/\W//g;  
                        chomp($rid);  
                        my $proname=propath($udom,$uname);  
                        my $qresult='';  
        my %hash;  
        if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
                   my $version=$hash{"version:$rid"};  
                            $qresult.="version=$version&";  
                            my $scope;  
                            for ($scope=1;$scope<=$version;$scope++) {  
       my $vkeys=$hash{"$scope:keys:$rid"};  
                               my @keys=split(/:/,$vkeys);  
                               my $key;  
                               $qresult.="$scope:keys=$vkeys&";  
                               foreach $key (@keys) {  
      $qresult.="$scope:$key=".$hash{"$scope:$rid:$key"}."&";  
                               }                                    
                            }  
    if (untie(%hash)) {  
               $qresult=~s/\&$//;  
                               print $client "$qresult\n";  
                            } else {  
                               print $client "error: ".($!+0)  
   ." untie(GDBM) Failed ".  
                                       "while attempting restore\n";  
                            }  
                        } else {  
                            print $client "error: ".($!+0)  
        ." tie(GDBM) Failed ".  
                                    "while attempting restore\n";  
                        }  
 # -------------------------------------------------------------------- chatsend  
                    } elsif ($userinput =~ /^chatsend/) {  
                        my ($cmd,$cdom,$cnum,$newpost)=split(/\:/,$userinput);  
                        &chatadd($cdom,$cnum,$newpost);  
                        print $client "ok\n";  
 # -------------------------------------------------------------------- chatretr  
                    } elsif ($userinput =~ /^chatretr/) {  
                        my   
                         ($cmd,$cdom,$cnum,$udom,$uname)=split(/\:/,$userinput);  
                        my $reply='';  
                        foreach (&getchat($cdom,$cnum,$udom,$uname)) {  
    $reply.=&escape($_).':';  
                        }  
                        $reply=~s/\:$//;  
                        print $client $reply."\n";  
 # ------------------------------------------------------------------- querysend  
                    } elsif ($userinput =~ /^querysend/) {  
                        my ($cmd,$query,  
    $arg1,$arg2,$arg3)=split(/\:/,$userinput);  
        $query=~s/\n*$//g;  
        print $client "".  
        sqlreply("$hostid{$clientip}\&$query".  
  "\&$arg1"."\&$arg2"."\&$arg3")."\n";  
 # ------------------------------------------------------------------ queryreply  
                    } elsif ($userinput =~ /^queryreply/) {  
                        my ($cmd,$id,$reply)=split(/:/,$userinput);   
        my $store;  
                        my $execdir=$perlvar{'lonDaemons'};  
                        if ($store=IO::File->new(">$execdir/tmp/$id")) {  
    $reply=~s/\&/\n/g;  
    print $store $reply;  
    close $store;  
    my $store2=IO::File->new(">$execdir/tmp/$id.end");  
    print $store2 "done\n";  
    close $store2;  
    print $client "ok\n";  
        }  
        else {  
    print $client "error: ".($!+0)  
        ." IO::File->new Failed ".  
                                    "while attempting queryreply\n";  
        }  
 # ----------------------------------------------------------------- courseidput  
                    } elsif ($userinput =~ /^courseidput/) {  
                        my ($cmd,$udom,$what)=split(/:/,$userinput);  
                        chomp($what);  
                        $udom=~s/\W//g;  
                        my $proname=  
                               "$perlvar{'lonUsersDir'}/$udom/nohist_courseids";  
                        my $now=time;  
                        my @pairs=split(/\&/,$what);  
        my %hash;  
        if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) {  
                            foreach my $pair (@pairs) {  
        my ($key,$value)=split(/=/,$pair);  
                                $hash{$key}=$value.':'.$now;  
                            }  
    if (untie(%hash)) {  
                               print $client "ok\n";  
                            } else {  
                               print $client "error: ".($!+0)  
   ." untie(GDBM) Failed ".  
                                       "while attempting courseidput\n";  
                            }  
                        } else {  
                            print $client "error: ".($!+0)  
        ." tie(GDBM) Failed ".  
                                       "while attempting courseidput\n";  
                        }  
 # ---------------------------------------------------------------- courseiddump  
                    } elsif ($userinput =~ /^courseiddump/) {  
                        my ($cmd,$udom,$since,$description)  
                           =split(/:/,$userinput);  
                        if (defined($description)) {  
                           $description=&unescape($description);  
        } else {  
                           $description='.';  
        }  
                        unless (defined($since)) { $since=0; }  
                        my $qresult='';  
                        my $proname=  
                               "$perlvar{'lonUsersDir'}/$udom/nohist_courseids";  
        my %hash;  
        if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) {  
                            while (my ($key,$value) = each(%hash)) {  
                                my ($descr,$lasttime)=split(/\:/,$value);  
                                if ($lasttime<$since) { next; }  
                                if ($description eq '.') {  
                                    $qresult.=$key.'='.$descr.'&';  
                                } else {  
                                    my $unescapeVal = &unescape($descr);  
                                    if (eval('$unescapeVal=~/$description/i')) {  
                                        $qresult.="$key=$descr&";  
                                    }  
                                }  
                            }  
                            if (untie(%hash)) {  
                                chop($qresult);  
                                print $client "$qresult\n";  
                            } else {  
                                print $client "error: ".($!+0)  
    ." untie(GDBM) Failed ".  
                                        "while attempting courseiddump\n";  
                            }  
                        } else {  
                            print $client "error: ".($!+0)  
        ." tie(GDBM) Failed ".  
                                       "while attempting courseiddump\n";  
                        }  
 # ----------------------------------------------------------------------- idput  
                    } elsif ($userinput =~ /^idput/) {  
                        my ($cmd,$udom,$what)=split(/:/,$userinput);  
                        chomp($what);  
                        $udom=~s/\W//g;  
                        my $proname="$perlvar{'lonUsersDir'}/$udom/ids";  
                        my $now=time;  
                        {  
    my $hfh;  
    if (  
                              $hfh=IO::File->new(">>$proname.hist")  
        ) { print $hfh "P:$now:$what\n"; }  
        }  
                        my @pairs=split(/\&/,$what);  
        my %hash;  
        if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) {  
                            foreach my $pair (@pairs) {  
        my ($key,$value)=split(/=/,$pair);  
                                $hash{$key}=$value;  
                            }  
    if (untie(%hash)) {  
                               print $client "ok\n";  
                            } else {  
                               print $client "error: ".($!+0)  
   ." untie(GDBM) Failed ".  
                                       "while attempting idput\n";  
                            }  
                        } else {  
                            print $client "error: ".($!+0)  
        ." tie(GDBM) Failed ".  
                                       "while attempting idput\n";  
                        }  
 # ----------------------------------------------------------------------- idget  
                    } elsif ($userinput =~ /^idget/) {  
                        my ($cmd,$udom,$what)=split(/:/,$userinput);  
                        chomp($what);  
                        $udom=~s/\W//g;  
                        my $proname="$perlvar{'lonUsersDir'}/$udom/ids";  
                        my @queries=split(/\&/,$what);  
                        my $qresult='';  
        my %hash;  
        if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) {  
                            for (my $i=0;$i<=$#queries;$i++) {  
                                $qresult.="$hash{$queries[$i]}&";  
                            }  
    if (untie(%hash)) {  
        $qresult=~s/\&$//;  
        print $client "$qresult\n";  
                            } else {  
        print $client "error: ".($!+0)  
    ." untie(GDBM) Failed ".  
        "while attempting idget\n";  
                            }  
                        } else {  
                            print $client "error: ".($!+0)  
        ." tie(GDBM) Failed ".  
                                    "while attempting idget\n";  
                        }  
 # ---------------------------------------------------------------------- tmpput  
                    } elsif ($userinput =~ /^tmpput/) {  
                        my ($cmd,$what)=split(/:/,$userinput);  
        my $store;  
                        $tmpsnum++;  
                        my $id=$$.'_'.$clientip.'_'.$tmpsnum;  
                        $id=~s/\W/\_/g;  
                        $what=~s/\n//g;  
                        my $execdir=$perlvar{'lonDaemons'};  
                        if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) {  
    print $store $what;  
    close $store;  
    print $client "$id\n";  
        }  
        else {  
    print $client "error: ".($!+0)  
        ."IO::File->new Failed ".  
                                    "while attempting tmpput\n";  
        }  
   
 # ---------------------------------------------------------------------- tmpget  
                    } elsif ($userinput =~ /^tmpget/) {  
                        my ($cmd,$id)=split(/:/,$userinput);  
                        chomp($id);  
                        $id=~s/\W/\_/g;  
                        my $store;  
                        my $execdir=$perlvar{'lonDaemons'};  
                        if ($store=IO::File->new("$execdir/tmp/$id.tmp")) {  
                            my $reply=<$store>;  
    print $client "$reply\n";  
                            close $store;  
        }  
        else {  
    print $client "error: ".($!+0)  
        ."IO::File->new Failed ".  
                                    "while attempting tmpget\n";  
        }  
   
 # ---------------------------------------------------------------------- tmpdel  
                    } elsif ($userinput =~ /^tmpdel/) {  
                        my ($cmd,$id)=split(/:/,$userinput);  
                        chomp($id);  
                        $id=~s/\W/\_/g;  
                        my $execdir=$perlvar{'lonDaemons'};  
                        if (unlink("$execdir/tmp/$id.tmp")) {  
    print $client "ok\n";  
        } else {  
    print $client "error: ".($!+0)  
        ."Unlink tmp Failed ".  
                                    "while attempting tmpdel\n";  
        }  
 # -------------------------------------------------------------------------- ls  
                    } elsif ($userinput =~ /^ls/) {  
                        my ($cmd,$ulsdir)=split(/:/,$userinput);  
                        my $ulsout='';  
                        my $ulsfn;  
                        if (-e $ulsdir) {  
                            if(-d $ulsdir) {  
                                if (opendir(LSDIR,$ulsdir)) {  
                                    while ($ulsfn=readdir(LSDIR)) {  
                                        my @ulsstats=stat($ulsdir.'/'.$ulsfn);  
                                        $ulsout.=$ulsfn.'&'.  
                                                 join('&',@ulsstats).':';  
                                    }  
                                    closedir(LSDIR);  
                                }  
                            } else {  
                                my @ulsstats=stat($ulsdir);  
                                $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';  
                            }  
                        } else {  
                           $ulsout='no_such_dir';  
                        }  
                        if ($ulsout eq '') { $ulsout='empty'; }  
                        print $client "$ulsout\n";  
 # ----------------------------------------------------------------- setannounce  
                    } elsif ($userinput =~ /^setannounce/) {  
        my ($cmd,$announcement)=split(/:/,$userinput);  
        chomp($announcement);  
        $announcement=&unescape($announcement);  
                        if (my $store=IO::File->new('>'.$perlvar{'lonDocRoot'}.  
  '/announcement.txt')) {  
    print $store $announcement;  
                            close $store;  
    print $client "ok\n";  
        } else {  
    print $client "error: ".($!+0)."\n";  
        }  
 # ------------------------------------------------------------------ Hanging up  
                    } elsif (($userinput =~ /^exit/) ||  
                             ($userinput =~ /^init/)) {  
                        &logthis(  
       "Client $clientip ($hostid{$clientip}) hanging up: $userinput");  
                        print $client "bye\n";  
                        $client->close();  
        last;  
 # ------------------------------------------------------------- unknown command  
    } elsif ($userinput =~ /^sethost:/) {  
        print $client &sethost($userinput)."\n";  
    } elsif ($userinput =~/^version:/) {  
        print $client &version($userinput)."\n";  
                    } else {  
                        # unknown command  
                        print $client "unknown_cmd\n";  
                    }  
 # -------------------------------------------------------------------- complete  # -------------------------------------------------------------------- complete
    alarm(0);  
                    &status('Listening to '.$hostid{$clientip});  
        }  
 # --------------------------------------------- client unknown or fishy, refuse  
             } else {  
         print $client "refused\n";  
                 $client->close();  
                 &logthis("<font color=blue>WARNING: "  
                 ."Rejected client $clientip, closing connection</font>");  
             }  
  }               
   
    &status('Listening to '.$clientname);
       }
   # --------------------------------------------- client unknown or fishy, refuse
    } else {
       print $client "refused\n";
       $client->close();
       &logthis("<font color=blue>WARNING: "
        ."Rejected client $clientip, closing connection</font>");
    }
       }             
       
 # =============================================================================  # =============================================================================
              
  &logthis("<font color=red>CRITICAL: "      &logthis("<font color=red>CRITICAL: "
  ."Disconnect from $clientip ($hostid{$clientip})</font>");           ."Disconnect from $clientip ($clientname)</font>");    
       
       
         # this exit is VERY important, otherwise the child will become      # this exit is VERY important, otherwise the child will become
         # a producer of more and more children, forking yourself into      # a producer of more and more children, forking yourself into
         # process death.      # process death.
         exit;      exit;
           
 }  }
   
Line 2294  sub make_new_child { Line 4032  sub make_new_child {
 #    user      - Name of the user for which the role is being put.  #    user      - Name of the user for which the role is being put.
 #    authtype  - The authentication type associated with the user.  #    authtype  - The authentication type associated with the user.
 #  #
 sub ManagePermissions  sub ManagePermissions {
 {  
     my $request = shift;      my $request = shift;
     my $domain  = shift;      my $domain  = shift;
     my $user    = shift;      my $user    = shift;
Line 2310  sub ManagePermissions Line 4047  sub ManagePermissions
  system("$execdir/lchtmldir $userhome $user $authtype");   system("$execdir/lchtmldir $userhome $user $authtype");
     }      }
 }  }
   
   #
   #  Return the full path of a user password file, whether it exists or not.
   # Parameters:
   #   domain     - Domain in which the password file lives.
   #   user       - name of the user.
   # Returns:
   #    Full passwd path:
   #
   sub PasswordPath {
       my $domain = shift;
       my $user   = shift;
   
       my $path   = &propath($domain, $user);
       $path  .= "/passwd";
   
       return $path;
   }
   
   #   Password Filename
   #   Returns the path to a passwd file given domain and user... only if
   #  it exists.
   # Parameters:
   #   domain    - Domain in which to search.
   #   user      - username.
   # Returns:
   #   - If the password file exists returns its path.
   #   - If the password file does not exist, returns undefined.
   #
   sub PasswordFilename {
       my $domain    = shift;
       my $user      = shift;
   
       Debug ("PasswordFilename called: dom = $domain user = $user");
   
       my $path  = PasswordPath($domain, $user);
       Debug("PasswordFilename got path: $path");
       if(-e $path) {
    return $path;
       } else {
    return undef;
       }
   }
   
   #
   #   Rewrite the contents of the user's passwd file.
   #  Parameters:
   #    domain    - domain of the user.
   #    name      - User's name.
   #    contents  - New contents of the file.
   # Returns:
   #   0    - Failed.
   #   1    - Success.
   #
   sub RewritePwFile {
       my $domain   = shift;
       my $user     = shift;
       my $contents = shift;
   
       my $file = PasswordFilename($domain, $user);
       if (defined $file) {
    my $pf = IO::File->new(">$file");
    if($pf) {
       print $pf "$contents\n";
       return 1;
    } else {
       return 0;
    }
       } else {
    return 0;
       }
   
   }
 #  #
 #   GetAuthType - Determines the authorization type of a user in a domain.  #   GetAuthType - Determines the authorization type of a user in a domain.
   
 #     Returns the authorization type or nouser if there is no such user.  #     Returns the authorization type or nouser if there is no such user.
 #  #
 sub GetAuthType   sub GetAuthType {
 {  
     my $domain = shift;      my $domain = shift;
     my $user   = shift;      my $user   = shift;
   
     Debug("GetAuthType( $domain, $user ) \n");      Debug("GetAuthType( $domain, $user ) \n");
     my $proname    = &propath($domain, $user);       my $passwdfile = PasswordFilename($domain, $user);
     my $passwdfile = "$proname/passwd";      if( defined $passwdfile ) {
     if( -e $passwdfile ) {  
  my $pf = IO::File->new($passwdfile);   my $pf = IO::File->new($passwdfile);
  my $realpassword = <$pf>;   my $realpassword = <$pf>;
  chomp($realpassword);   chomp($realpassword);
  Debug("Password info = $realpassword\n");   Debug("Password info = $realpassword\n");
  my ($authtype, $contentpwd) = split(/:/, $realpassword);   return $realpassword;
  Debug("Authtype = $authtype, content = $contentpwd\n");      } else {
  my $availinfo = '';  
  if($authtype eq 'krb4' or $authtype eq 'krb5') {  
     $availinfo = $contentpwd;  
  }  
   
  return "$authtype:$availinfo";  
     }  
     else {  
  Debug("Returning nouser");   Debug("Returning nouser");
  return "nouser";   return "nouser";
     }      }
 }  }
   
   #
   #  Validate a user given their domain, name and password.  This utility
   #  function is used by both  AuthenticateHandler and ChangePasswordHandler
   #  to validate the login credentials of a user.
   # Parameters:
   #    $domain    - The domain being logged into (this is required due to
   #                 the capability for multihomed systems.
   #    $user      - The name of the user being validated.
   #    $password  - The user's propoposed password.
   #
   # Returns:
   #     1        - The domain,user,pasword triplet corresponds to a valid
   #                user.
   #     0        - The domain,user,password triplet is not a valid user.
   #
   sub ValidateUser {
       my $domain  = shift;
       my $user    = shift;
       my $password= shift;
   
       # Why negative ~pi you may well ask?  Well this function is about
       # authentication, and therefore very important to get right.
       # I've initialized the flag that determines whether or not I've 
       # validated correctly to a value it's not supposed to get.
       # At the end of this function. I'll ensure that it's not still that
       # value so we don't just wind up returning some accidental value
       # as a result of executing an unforseen code path that
       # did not set $validated.
   
       my $validated = -3.14159;
   
       #  How we authenticate is determined by the type of authentication
       #  the user has been assigned.  If the authentication type is
       #  "nouser", the user does not exist so we will return 0.
   
       my $contents = GetAuthType($domain, $user);
       my ($howpwd, $contentpwd) = split(/:/, $contents);
   
       my $null = pack("C",0); # Used by kerberos auth types.
   
       if ($howpwd ne 'nouser') {
   
    if($howpwd eq "internal") { # Encrypted is in local password file.
       $validated = (crypt($password, $contentpwd) eq $contentpwd);
    }
    elsif ($howpwd eq "unix") { # User is a normal unix user.
       $contentpwd = (getpwnam($user))[1];
       if($contentpwd) {
    if($contentpwd eq 'x') { # Shadow password file...
       my $pwauth_path = "/usr/local/sbin/pwauth";
       open PWAUTH,  "|$pwauth_path" or
    die "Cannot invoke authentication";
       print PWAUTH "$user\n$password\n";
       close PWAUTH;
       $validated = ! $?;
   
    } else {         # Passwords in /etc/passwd. 
       $validated = (crypt($password,
    $contentpwd) eq $contentpwd);
    }
       } else {
    $validated = 0;
       }
    }
    elsif ($howpwd eq "krb4") { # user is in kerberos 4 auth. domain.
       if(! ($password =~ /$null/) ) {
    my $k4error = &Authen::Krb4::get_pw_in_tkt($user,
      "",
      $contentpwd,,
      'krbtgt',
      $contentpwd,
      1,
      $password);
    if(!$k4error) {
       $validated = 1;
    }
    else {
       $validated = 0;
       &logthis('krb4: '.$user.', '.$contentpwd.', '.
        &Authen::Krb4::get_err_txt($Authen::Krb4::error));
    }
       }
       else {
    $validated = 0; # Password has a match with null.
       }
    }
    elsif ($howpwd eq "krb5") { # User is in kerberos 5 auth. domain.
       if(!($password =~ /$null/)) { # Null password not allowed.
    my $krbclient = &Authen::Krb5::parse_name($user.'@'
     .$contentpwd);
    my $krbservice = "krbtgt/".$contentpwd."\@".$contentpwd;
    my $krbserver  = &Authen::Krb5::parse_name($krbservice);
    my $credentials= &Authen::Krb5::cc_default();
    $credentials->initialize($krbclient);
    my $krbreturn  = &Authen::KRb5::get_in_tkt_with_password($krbclient,
    $krbserver,
    $password,
    $credentials);
    $validated = ($krbreturn == 1);
       }
       else {
    $validated = 0;
       }
    }
    elsif ($howpwd eq "localauth") { 
       #  Authenticate via installation specific authentcation method:
       $validated = &localauth::localauth($user, 
          $password, 
          $contentpwd);
    }
    else { # Unrecognized auth is also bad.
       $validated = 0;
    }
       } else {
    $validated = 0;
       }
       #
       #  $validated has the correct stat of the authentication:
       #
   
       unless ($validated != -3.14159) {
    die "ValidateUser - failed to set the value of validated";
       }
       return $validated;
   }
   
   #
   #    Add a line to the subscription list?
   #
 sub addline {  sub addline {
     my ($fname,$hostid,$ip,$newline)=@_;      my ($fname,$hostid,$ip,$newline)=@_;
     my $contents;      my $contents;
Line 2362  sub addline { Line 4291  sub addline {
     $sh->close();      $sh->close();
     return $found;      return $found;
 }  }
   #
   #    Get chat messages.
   #
 sub getchat {  sub getchat {
     my ($cdom,$cname,$udom,$uname)=@_;      my ($cdom,$cname,$udom,$uname)=@_;
     my %hash;      my %hash;
Line 2387  sub getchat { Line 4318  sub getchat {
     }      }
     return (@participants,@entries);      return (@participants,@entries);
 }  }
   #
   #   Add a chat message
   #
 sub chatadd {  sub chatadd {
     my ($cdom,$cname,$newchat)=@_;      my ($cdom,$cname,$newchat)=@_;
     my %hash;      my %hash;
Line 2427  sub chatadd { Line 4360  sub chatadd {
 sub unsub {  sub unsub {
     my ($fname,$clientip)=@_;      my ($fname,$clientip)=@_;
     my $result;      my $result;
     if (unlink("$fname.$hostid{$clientip}")) {      if (unlink("$fname.$clientname")) {
  $result="ok\n";   $result="ok\n";
     } else {      } else {
  $result="not_subscribed\n";   $result="not_subscribed\n";
     }      }
     if (-e "$fname.subscription") {      if (-e "$fname.subscription") {
  my $found=&addline($fname,$hostid{$clientip},$clientip,'');   my $found=&addline($fname,$clientname,$clientip,'');
  if ($found) { $result="ok\n"; }   if ($found) { $result="ok\n"; }
     } else {      } else {
  if ($result != "ok\n") { $result="not_subscribed\n"; }   if ($result != "ok\n") { $result="not_subscribed\n"; }
Line 2446  sub currentversion { Line 4379  sub currentversion {
     my $version=-1;      my $version=-1;
     my $ulsdir='';      my $ulsdir='';
     if ($fname=~/^(.+)\/[^\/]+$/) {      if ($fname=~/^(.+)\/[^\/]+$/) {
        $ulsdir=$1;   $ulsdir=$1;
     }      }
     my ($fnamere1,$fnamere2);      my ($fnamere1,$fnamere2);
     # remove version if already specified      # remove version if already specified
Line 2465  sub currentversion { Line 4398  sub currentversion {
 # see if this is a regular file (ignore links produced earlier)  # see if this is a regular file (ignore links produced earlier)
     my $thisfile=$ulsdir.'/'.$ulsfn;      my $thisfile=$ulsdir.'/'.$ulsfn;
     unless (-l $thisfile) {      unless (-l $thisfile) {
  if ($thisfile=~/\Q$fnamere1\E(\d+)\Q$fnamere2\E/) {   if ($thisfile=~/\Q$fnamere1\E(\d+)\Q$fnamere2\E$/) {
     if ($1>$version) { $version=$1; }      if ($1>$version) { $version=$1; }
  }   }
     }      }
Line 2503  sub subscribe { Line 4436  sub subscribe {
                     symlink($root.'.'.$extension,                      symlink($root.'.'.$extension,
                             $root.'.'.$currentversion.'.'.$extension);                              $root.'.'.$currentversion.'.'.$extension);
                     unless ($extension=~/\.meta$/) {                      unless ($extension=~/\.meta$/) {
                        symlink($root.'.'.$extension.'.meta',   symlink($root.'.'.$extension.'.meta',
                             $root.'.'.$currentversion.'.'.$extension.'.meta');   $root.'.'.$currentversion.'.'.$extension.'.meta');
     }      }
                 }                  }
             }              }
Line 2513  sub subscribe { Line 4446  sub subscribe {
     if (-d $fname) {      if (-d $fname) {
  $result="directory\n";   $result="directory\n";
     } else {      } else {
  if (-e "$fname.$hostid{$clientip}") {&unsub($fname,$clientip);}   if (-e "$fname.$clientname") {&unsub($fname,$clientip);}
  my $now=time;   my $now=time;
  my $found=&addline($fname,$hostid{$clientip},$clientip,   my $found=&addline($fname,$clientname,$clientip,
    "$hostid{$clientip}:$clientip:$now\n");     "$clientname:$clientip:$now\n");
  if ($found) { $result="$fname\n"; }   if ($found) { $result="$fname\n"; }
  # if they were subscribed to only meta data, delete that   # if they were subscribed to only meta data, delete that
                 # subscription, when you subscribe to a file you also get                  # subscription, when you subscribe to a file you also get
Line 2558  sub make_passwd_file { Line 4491  sub make_passwd_file {
     print $pf "localauth:$npass\n";      print $pf "localauth:$npass\n";
  }   }
     } elsif ($umode eq 'unix') {      } elsif ($umode eq 'unix') {
  {   #
     my $execpath="$perlvar{'lonDaemons'}/"."lcuseradd";   #  Don't allow the creation of privileged accounts!!! that would
     {   #  be real bad!!!
  &Debug("Executing external: ".$execpath);   #
  &Debug("user  = ".$uname.", Password =". $npass);   my $uid = getpwnam($uname);
  my $se = IO::File->new("|$execpath > $perlvar{'lonDaemons'}/logs/lcuseradd.log");   if((defined $uid) && ($uid == 0)) {
  print $se "$uname\n";      &logthis(">>>Attempted add of privileged account blocked<<<");
  print $se "$npass\n";      return "no_priv_account_error\n";
  print $se "$npass\n";   }
     }  
     my $useraddok = $?;   #
     if($useraddok > 0) {   my $execpath="$perlvar{'lonDaemons'}/"."lcuseradd";
  &logthis("Failed lcuseradd: ".&lcuseraddstrerror($useraddok));  
     }   &Debug("Executing external: ".$execpath);
     my $pf = IO::File->new(">$passfilename");   &Debug("user  = ".$uname.", Password =". $npass);
     print $pf "unix:\n";   my $se = IO::File->new("|$execpath > $perlvar{'lonDaemons'}/logs/lcuseradd.log");
    print $se "$uname\n";
    print $se "$npass\n";
    print $se "$npass\n";
   
    my $useraddok = $?;
    if($useraddok > 0) {
       my $lcstring = lcuseraddstrerror($useraddok);
       &logthis("Failed lcuseradd: $lcstring");
       return "error: lcuseradd failed: $lcstring\n";
  }   }
    my $pf = IO::File->new(">$passfilename");
    print $pf "unix:\n";
    
     } elsif ($umode eq 'none') {      } elsif ($umode eq 'none') {
  {   {
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new(">$passfilename");
Line 2607  sub version { Line 4552  sub version {
     $remoteVERSION=(split(/:/,$userinput))[1];      $remoteVERSION=(split(/:/,$userinput))[1];
     return "version:$VERSION";      return "version:$VERSION";
 }  }
   ############## >>>>>>>>>>>>>>>>>>>>>>>>>> FUTUREWORK <<<<<<<<<<<<<<<<<<<<<<<<<<<<
 #There is a copy of this in lonnet.pm  #There is a copy of this in lonnet.pm
   #   Can we hoist these lil' things out into common places?
   #
 sub userload {  sub userload {
     my $numusers=0;      my $numusers=0;
     {      {
Line 2618  sub userload { Line 4565  sub userload {
  while ($filename=readdir(LONIDS)) {   while ($filename=readdir(LONIDS)) {
     if ($filename eq '.' || $filename eq '..') {next;}      if ($filename eq '.' || $filename eq '..') {next;}
     my ($mtime)=(stat($perlvar{'lonIDsDir'}.'/'.$filename))[9];      my ($mtime)=(stat($perlvar{'lonIDsDir'}.'/'.$filename))[9];
     if ($curtime-$mtime < 3600) { $numusers++; }      if ($curtime-$mtime < 1800) { $numusers++; }
  }   }
  closedir(LONIDS);   closedir(LONIDS);
     }      }

Removed from v.1.157  
changed lines
  Added in v.1.178.2.18


FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>