Diff for /loncom/lond between versions 1.196 and 1.224

version 1.196, 2004/06/17 11:02:25 version 1.224, 2004/08/06 10:27:53
Line 50  use File::Copy; Line 50  use File::Copy;
 use LONCAPA::ConfigFileEdit;  use LONCAPA::ConfigFileEdit;
 use LONCAPA::lonlocal;  use LONCAPA::lonlocal;
 use LONCAPA::lonssl;  use LONCAPA::lonssl;
   use Fcntl qw(:flock);
   
 my $DEBUG = 11;       # Non zero to enable debug log entries.  my $DEBUG = 1;       # Non zero to enable debug log entries.
   
 my $status='';  my $status='';
 my $lastlog='';  my $lastlog='';
   
 my $VERSION='$Revision$'; #' stupid emacs  my $VERSION='$Revision$'; #' stupid emacs
 my $remoteVERSION;  my $remoteVERSION;
 my $currenthostid;  my $currenthostid="default";
 my $currentdomainid;  my $currentdomainid;
   
 my $client;  my $client;
Line 69  my $clientname;   # LonCAPA name of clie Line 70  my $clientname;   # LonCAPA name of clie
 my $server;  my $server;
 my $thisserver; # DNS of us.  my $thisserver; # DNS of us.
   
   my $keymode;
   
   my $cipher; # Cipher key negotiated with client
   my $tmpsnum = 0; # Id of tmpputs.
   
 #   # 
 #   Connection type is:  #   Connection type is:
 #      client                   - All client actions are allowed  #      client                   - All client actions are allowed
Line 88  my %managers;   # Ip -> manager names Line 94  my %managers;   # Ip -> manager names
 my %perlvar; # Will have the apache conf defined perl vars.  my %perlvar; # Will have the apache conf defined perl vars.
   
 #  #
   #   The hash below is used for command dispatching, and is therefore keyed on the request keyword.
   #    Each element of the hash contains a reference to an array that contains:
   #          A reference to a sub that executes the request corresponding to the keyword.
   #          A flag that is true if the request must be encoded to be acceptable.
   #          A mask with bits as follows:
   #                      CLIENT_OK    - Set when the function is allowed by ordinary clients
   #                      MANAGER_OK   - Set when the function is allowed to manager clients.
   #
   my $CLIENT_OK  = 1;
   my $MANAGER_OK = 2;
   my %Dispatcher;
   
   
   #
 #  The array below are password error strings."  #  The array below are password error strings."
 #  #
 my $lastpwderror    = 13; # Largest error number from lcpasswd.  my $lastpwderror    = 13; # Largest error number from lcpasswd.
Line 102  my @passwderrors = ("ok", Line 122  my @passwderrors = ("ok",
    "lcpasswd Cannot set new passwd.",     "lcpasswd Cannot set new passwd.",
    "lcpasswd Username has invalid characters",     "lcpasswd Username has invalid characters",
    "lcpasswd Invalid characters in password",     "lcpasswd Invalid characters in password",
     "11", "12",     "lcpasswd User already exists", 
     "lcpasswd Password mismatch");                     "lcpasswd Something went wrong with user addition.",
       "lcpasswd Password mismatch",
       "lcpasswd Error filename is invalid");
   
   
 #  The array below are lcuseradd error strings.:  #  The array below are lcuseradd error strings.:
Line 125  my @adderrors    = ("ok", Line 147  my @adderrors    = ("ok",
     "lcuseradd Password mismatch");      "lcuseradd Password mismatch");
   
   
   
   #
   #   Statistics that are maintained and dislayed in the status line.
   #
   my $Transactions = 0; # Number of attempted transactions.
   my $Failures     = 0; # Number of transcations failed.
   
   #   ResetStatistics: 
   #      Resets the statistics counters:
   #
   sub ResetStatistics {
       $Transactions = 0;
       $Failures     = 0;
   }
   
   
   
 #------------------------------------------------------------------------  #------------------------------------------------------------------------
 #  #
 #   LocalConnection  #   LocalConnection
Line 155  sub LocalConnection { Line 194  sub LocalConnection {
  ."$clientdns ne $thisserver </font>");   ."$clientdns ne $thisserver </font>");
  close $Socket;   close $Socket;
  return undef;   return undef;
     }       }  else {
     else {  
  chomp($initcmd); # Get rid of \n in filename.   chomp($initcmd); # Get rid of \n in filename.
  my ($init, $type, $name) = split(/:/, $initcmd);   my ($init, $type, $name) = split(/:/, $initcmd);
  Debug(" Init command: $init $type $name ");   Debug(" Init command: $init $type $name ");
Line 287  sub InsecureConnection { Line 325  sub InsecureConnection {
     $answer    =~s/\W//g;      $answer    =~s/\W//g;
     if($challenge eq $answer) {      if($challenge eq $answer) {
  return 1;   return 1;
     }       } else {
     else {  
  logthis("<font color='blue'>WARNING client did not respond to challenge</font>");   logthis("<font color='blue'>WARNING client did not respond to challenge</font>");
  &status("No challenge reqply");   &status("No challenge reqply");
  return 0;   return 0;
Line 352  sub ReadManagerTable { Line 389  sub ReadManagerTable {
    while(my $host = <MANAGERS>) {     while(my $host = <MANAGERS>) {
       chomp($host);        chomp($host);
       if ($host =~ "^#") {                  # Comment line.        if ($host =~ "^#") {                  # Comment line.
          logthis('<font color="green"> Skipping line: '. "$host</font>\n");  
          next;           next;
       }        }
       if (!defined $hostip{$host}) { # This is a non cluster member        if (!defined $hostip{$host}) { # This is a non cluster member
Line 618  sub PushFile { Line 654  sub PushFile {
  &logthis('<font color="red"> Pushfile: unable to install '   &logthis('<font color="red"> Pushfile: unable to install '
  .$tablefile." $! </font>");   .$tablefile." $! </font>");
  return "error:$!";   return "error:$!";
     }      } else {
     else {  
  &logthis('<font color="green"> Installed new '.$tablefile   &logthis('<font color="green"> Installed new '.$tablefile
  ."</font>");   ."</font>");
   
Line 898  sub EditFile { Line 933  sub EditFile {
   
     return "ok\n";      return "ok\n";
 }  }
   
   #---------------------------------------------------------------
   #
   # Manipulation of hash based databases (factoring out common code
   # for later use as we refactor.
   #
   #  Ties a domain level resource file to a hash.
   #  If requested a history entry is created in the associated hist file.
   #
   #  Parameters:
   #     domain    - Name of the domain in which the resource file lives.
   #     namespace - Name of the hash within that domain.
   #     how       - How to tie the hash (e.g. GDBM_WRCREAT()).
   #     loghead   - Optional parameter, if present a log entry is created
   #                 in the associated history file and this is the first part
   #                  of that entry.
   #     logtail   - Goes along with loghead,  The actual logentry is of the
   #                 form $loghead:<timestamp>:logtail.
   # Returns:
   #    Reference to a hash bound to the db file or alternatively undef
   #    if the tie failed.
   #
   sub tie_domain_hash {
       my ($domain,$namespace,$how,$loghead,$logtail) = @_;
       
       # Filter out any whitespace in the domain name:
       
       $domain =~ s/\W//g;
       
       # We have enough to go on to tie the hash:
       
       my $user_top_dir   = $perlvar{'lonUsersDir'};
       my $domain_dir     = $user_top_dir."/$domain";
       my $resource_file  = $domain_dir."/$namespace.db";
       my %hash;
       if(tie(%hash, 'GDBM_File', $resource_file, $how, 0640)) {
    if (defined($loghead)) { # Need to log the operation.
       my $logFh = IO::File->new(">>$domain_dir/$namespace.hist");
       if($logFh) {
    my $timestamp = time;
    print $logFh "$loghead:$timestamp:$logtail\n";
       }
       $logFh->close;
    }
    return \%hash; # Return the tied hash.
       } else {
    return undef; # Tie failed.
       }
   }
   
   #
   #   Ties a user's resource file to a hash.  
   #   If necessary, an appropriate history
   #   log file entry is made as well.
   #   This sub factors out common code from the subs that manipulate
   #   the various gdbm files that keep keyword value pairs.
   # Parameters:
   #   domain       - Name of the domain the user is in.
   #   user         - Name of the 'current user'.
   #   namespace    - Namespace representing the file to tie.
   #   how          - What the tie is done to (e.g. GDBM_WRCREAT().
   #   loghead      - Optional first part of log entry if there may be a
   #                  history file.
   #   what         - Optional tail of log entry if there may be a history
   #                  file.
   # Returns:
   #   hash to which the database is tied.  It's up to the caller to untie.
   #   undef if the has could not be tied.
   #
   sub tie_user_hash {
       my ($domain,$user,$namespace,$how,$loghead,$what) = @_;
   
       $namespace=~s/\//\_/g; # / -> _
       $namespace=~s/\W//g; # whitespace eliminated.
       my $proname     = propath($domain, $user);
      
       #  Tie the database.
       
       my %hash;
       if(tie(%hash, 'GDBM_File', "$proname/$namespace.db",
      $how, 0640)) {
    # If this is a namespace for which a history is kept,
    # make the history log entry:    
    if (($namespace =~/^nohist\_/) && (defined($loghead))) {
       my $args = scalar @_;
       Debug(" Opening history: $namespace $args");
       my $hfh = IO::File->new(">>$proname/$namespace.hist"); 
       if($hfh) {
    my $now = time;
    print $hfh "$loghead:$now:$what\n";
       }
       $hfh->close;
    }
    return \%hash;
       } else {
    return undef;
       }
       
   }
   
   #--------------------- Request Handlers --------------------------------------------
   #
   #   By convention each request handler registers itself prior to the sub 
   #   declaration:
   #
   
   #++
   #
   #  Handles ping requests.
   #  Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $replyfd- File descriptor connected to the client
   #  Implicit Inputs:
   #      $currenthostid - Global variable that carries the name of the host we are
   #                       known as.
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit.
   #  Side effects:
   #      Reply information is sent to the client.
   
   sub ping_handler {
       my ($cmd, $tail, $client) = @_;
       Debug("$cmd $tail $client .. $currenthostid:");
      
       Reply( $client,"$currenthostid\n","$cmd:$tail");
      
       return 1;
   }
   &register_handler("ping", \&ping_handler, 0, 1, 1);       # Ping unencoded, client or manager.
   
   #++
   #
   # Handles pong requests.  Pong replies with our current host id, and
   #                         the results of a ping sent to us via our lonc.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $replyfd- File descriptor connected to the client
   #  Implicit Inputs:
   #      $currenthostid - Global variable that carries the name of the host we are
   #                       connected to.
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit.
   #  Side effects:
   #      Reply information is sent to the client.
   
   sub pong_handler {
       my ($cmd, $tail, $replyfd) = @_;
   
       my $reply=&reply("ping",$clientname);
       &Reply( $replyfd, "$currenthostid:$reply\n", "$cmd:$tail"); 
       return 1;
   }
   &register_handler("pong", \&pong_handler, 0, 1, 1);       # Pong unencoded, client or manager
   
   #++
   #      Called to establish an encrypted session key with the remote client.
   #      Note that with secure lond, in most cases this function is never
   #      invoked.  Instead, the secure session key is established either
   #      via a local file that's locked down tight and only lives for a short
   #      time, or via an ssl tunnel...and is generated from a bunch-o-random
   #      bits from /dev/urandom, rather than the predictable pattern used by
   #      by this sub.  This sub is only used in the old-style insecure
   #      key negotiation.
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $replyfd- File descriptor connected to the client
   #  Implicit Inputs:
   #      $currenthostid - Global variable that carries the name of the host
   #                       known as.
   #      $clientname    - Global variable that carries the name of the hsot we're connected to.
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit.
   #  Implicit Outputs:
   #      Reply information is sent to the client.
   #      $cipher is set with a reference to a new IDEA encryption object.
   #
   sub establish_key_handler {
       my ($cmd, $tail, $replyfd) = @_;
   
       my $buildkey=time.$$.int(rand 100000);
       $buildkey=~tr/1-6/A-F/;
       $buildkey=int(rand 100000).$buildkey.int(rand 100000);
       my $key=$currenthostid.$clientname;
       $key=~tr/a-z/A-Z/;
       $key=~tr/G-P/0-9/;
       $key=~tr/Q-Z/0-9/;
       $key=$key.$buildkey.$key.$buildkey.$key.$buildkey;
       $key=substr($key,0,32);
       my $cipherkey=pack("H32",$key);
       $cipher=new IDEA $cipherkey;
       &Reply($replyfd, "$buildkey\n", "$cmd:$tail"); 
      
       return 1;
   
   }
   &register_handler("ekey", \&establish_key_handler, 0, 1,1);
   
   
   #     Handler for the load command.  Returns the current system load average
   #     to the requestor.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $replyfd- File descriptor connected to the client
   #  Implicit Inputs:
   #      $currenthostid - Global variable that carries the name of the host
   #                       known as.
   #      $clientname    - Global variable that carries the name of the hsot we're connected to.
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit.
   #  Side effects:
   #      Reply information is sent to the client.
   sub load_handler {
       my ($cmd, $tail, $replyfd) = @_;
   
      # Get the load average from /proc/loadavg and calculate it as a percentage of
      # the allowed load limit as set by the perl global variable lonLoadLim
   
       my $loadavg;
       my $loadfile=IO::File->new('/proc/loadavg');
      
       $loadavg=<$loadfile>;
       $loadavg =~ s/\s.*//g;                      # Extract the first field only.
      
       my $loadpercent=100*$loadavg/$perlvar{'lonLoadLim'};
   
       &Reply( $replyfd, "$loadpercent\n", "$cmd:$tail");
      
       return 1;
   }
   register_handler("load", \&load_handler, 0, 1, 0);
   
   #
   #   Process the userload request.  This sub returns to the client the current
   #  user load average.  It can be invoked either by clients or managers.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $replyfd- File descriptor connected to the client
   #  Implicit Inputs:
   #      $currenthostid - Global variable that carries the name of the host
   #                       known as.
   #      $clientname    - Global variable that carries the name of the hsot we're connected to.
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit
   # Implicit inputs:
   #     whatever the userload() function requires.
   #  Implicit outputs:
   #     the reply is written to the client.
   #
   sub user_load_handler {
       my ($cmd, $tail, $replyfd) = @_;
   
       my $userloadpercent=&userload();
       &Reply($replyfd, "$userloadpercent\n", "$cmd:$tail");
       
       return 1;
   }
   register_handler("userload", \&user_load_handler, 0, 1, 0);
   
   #   Process a request for the authorization type of a user:
   #   (userauth).
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $replyfd- File descriptor connected to the client
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit
   # Implicit outputs:
   #    The user authorization type is written to the client.
   #
   sub user_authorization_type {
       my ($cmd, $tail, $replyfd) = @_;
      
       my $userinput = "$cmd:$tail";
      
       #  Pull the domain and username out of the command tail.
       # and call get_auth_type to determine the authentication type.
      
       my ($udom,$uname)=split(/:/,$tail);
       my $result = &get_auth_type($udom, $uname);
       if($result eq "nouser") {
    &Failure( $replyfd, "unknown_user\n", $userinput);
       } else {
    #
    # We only want to pass the second field from get_auth_type
    # for ^krb.. otherwise we'll be handing out the encrypted
    # password for internals e.g.
    #
    my ($type,$otherinfo) = split(/:/,$result);
    if($type =~ /^krb/) {
       $type = $result;
    }
    &Reply( $replyfd, "$type:\n", $userinput);
       }
     
       return 1;
   }
   &register_handler("currentauth", \&user_authorization_type, 1, 1, 0);
   
   #   Process a request by a manager to push a hosts or domain table 
   #   to us.  We pick apart the command and pass it on to the subs
   #   that already exist to do this.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $client - File descriptor connected to the client
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit
   # Implicit Output:
   #    a reply is written to the client.
   
   sub push_file_handler {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = "$cmd:$tail";
   
       # At this time we only know that the IP of our partner is a valid manager
       # the code below is a hook to do further authentication (e.g. to resolve
       # spoofing).
   
       my $cert = &GetCertificate($userinput);
       if(&ValidManager($cert)) { 
   
    # Now presumably we have the bona fides of both the peer host and the
    # process making the request.
         
    my $reply = &PushFile($userinput);
    &Reply($client, "$reply\n", $userinput);
   
       } else {
    &Failure( $client, "refused\n", $userinput);
       } 
       return 1;
   }
   &register_handler("pushfile", \&push_file_handler, 1, 0, 1);
   
   
   
   #   Process a reinit request.  Reinit requests that either
   #   lonc or lond be reinitialized so that an updated 
   #   host.tab or domain.tab can be processed.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $client - File descriptor connected to the client
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit
   #  Implicit output:
   #     a reply is sent to the client.
   #
   sub reinit_process_handler {
       my ($cmd, $tail, $client) = @_;
      
       my $userinput = "$cmd:$tail";
      
       my $cert = &GetCertificate($userinput);
       if(&ValidManager($cert)) {
    chomp($userinput);
    my $reply = &ReinitProcess($userinput);
    &Reply( $client,  "$reply\n", $userinput);
       } else {
    &Failure( $client, "refused\n", $userinput);
       }
       return 1;
   }
   
   &register_handler("reinit", \&reinit_process_handler, 1, 0, 1);
   
   #  Process the editing script for a table edit operation.
   #  the editing operation must be encrypted and requested by
   #  a manager host.
   #
   # Parameters:
   #      $cmd    - the actual keyword that invoked us.
   #      $tail   - the tail of the request that invoked us.
   #      $client - File descriptor connected to the client
   #  Returns:
   #      1       - Ok to continue processing.
   #      0       - Program should exit
   #  Implicit output:
   #     a reply is sent to the client.
   #
   sub edit_table_handler {
       my ($command, $tail, $client) = @_;
      
       my $userinput = "$command:$tail";
   
       my $cert = &GetCertificate($userinput);
       if(&ValidManager($cert)) {
    my($filetype, $script) = split(/:/, $tail);
    if (($filetype eq "hosts") || 
       ($filetype eq "domain")) {
       if($script ne "") {
    &Reply($client,              # BUGBUG - EditFile
         &EditFile($userinput), #   could fail.
         $userinput);
       } else {
    &Failure($client,"refused\n",$userinput);
       }
    } else {
       &Failure($client,"refused\n",$userinput);
    }
       } else {
    &Failure($client,"refused\n",$userinput);
       }
       return 1;
   }
   register_handler("edit", \&edit_table_handler, 1, 0, 1);
   
   
   #
   #   Authenticate a user against the LonCAPA authentication
   #   database.  Note that there are several authentication
   #   possibilities:
   #   - unix     - The user can be authenticated against the unix
   #                password file.
   #   - internal - The user can be authenticated against a purely 
   #                internal per user password file.
   #   - kerberos - The user can be authenticated against either a kerb4 or kerb5
   #                ticket granting authority.
   #   - user     - The person tailoring LonCAPA can supply a user authentication
   #                mechanism that is per system.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   #
   sub authenticate_handler {
       my ($cmd, $tail, $client) = @_;
   
       
       #  Regenerate the full input line 
       
       my $userinput  = $cmd.":".$tail;
       
       #  udom    - User's domain.
       #  uname   - Username.
       #  upass   - User's password.
       
       my ($udom,$uname,$upass)=split(/:/,$tail);
       &Debug(" Authenticate domain = $udom, user = $uname, password = $upass");
       chomp($upass);
       $upass=&unescape($upass);
   
       my $pwdcorrect = &validate_user($udom, $uname, $upass);
       if($pwdcorrect) {
    &Reply( $client, "authorized\n", $userinput);
    #
    #  Bad credentials: Failed to authorize
    #
       } else {
    &Failure( $client, "non_authorized\n", $userinput);
       }
   
       return 1;
   }
   
   register_handler("auth", \&authenticate_handler, 1, 1, 0);
   
   #
   #   Change a user's password.  Note that this function is complicated by
   #   the fact that a user may be authenticated in more than one way:
   #   At present, we are not able to change the password for all types of
   #   authentication methods.  Only for:
   #      unix    - unix password or shadow passoword style authentication.
   #      local   - Locally written authentication mechanism.
   #   For now, kerb4 and kerb5 password changes are not supported and result
   #   in an error.
   # FUTURE WORK:
   #    Support kerberos passwd changes?
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   sub change_password_handler {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = $cmd.":".$tail;           # Reconstruct client's string.
   
       #
       #  udom  - user's domain.
       #  uname - Username.
       #  upass - Current password.
       #  npass - New password.
      
       my ($udom,$uname,$upass,$npass)=split(/:/,$tail);
   
       $upass=&unescape($upass);
       $npass=&unescape($npass);
       &Debug("Trying to change password for $uname");
   
       # First require that the user can be authenticated with their
       # old password:
   
       my $validated = &validate_user($udom, $uname, $upass);
       if($validated) {
    my $realpasswd  = &get_auth_type($udom, $uname); # Defined since authd.
   
    my ($howpwd,$contentpwd)=split(/:/,$realpasswd);
    if ($howpwd eq 'internal') {
       &Debug("internal auth");
       my $salt=time;
       $salt=substr($salt,6,2);
       my $ncpass=crypt($npass,$salt);
       if(&rewrite_password_file($udom, $uname, "internal:$ncpass")) {
    &logthis("Result of password change for "
    ."$uname: pwchange_success");
    &Reply($client, "ok\n", $userinput);
       } else {
    &logthis("Unable to open $uname passwd "               
    ."to change password");
    &Failure( $client, "non_authorized\n",$userinput);
       }
    } elsif ($howpwd eq 'unix') {
       # Unix means we have to access /etc/password
       &Debug("auth is unix");
       my $execdir=$perlvar{'lonDaemons'};
       &Debug("Opening lcpasswd pipeline");
       my $pf = IO::File->new("|$execdir/lcpasswd > "
      ."$perlvar{'lonDaemons'}"
      ."/logs/lcpasswd.log");
       print $pf "$uname\n$npass\n$npass\n";
       close $pf;
       my $err = $?;
       my $result = ($err>0 ? 'pwchange_failure' : 'ok');
       &logthis("Result of password change for $uname: ".
        &lcpasswdstrerror($?));
       &Reply($client, "$result\n", $userinput);
    } else {
       # this just means that the current password mode is not
       # one we know how to change (e.g the kerberos auth modes or
       # locally written auth handler).
       #
       &Failure( $client, "auth_mode_error\n", $userinput);
    }  
   
       } else {
    &Failure( $client, "non_authorized\n", $userinput);
       }
   
       return 1;
   }
   register_handler("passwd", \&change_password_handler, 1, 1, 0);
   
   
   #---------------------------------------------------------------
   #
   #   Getting, decoding and dispatching requests:
   #
   
   #
   #   Get a Request:
   #   Gets a Request message from the client.  The transaction
   #   is defined as a 'line' of text.  We remove the new line
   #   from the text line.  
   #   
   sub get_request {
       my $input = <$client>;
       chomp($input);
   
       Debug("get_request: Request = $input\n");
   
       &status('Processing '.$clientname.':'.$input);
   
       return $input;
   }
   #---------------------------------------------------------------
   #
   #  Process a request.  This sub should shrink as each action
   #  gets farmed out into a separat sub that is registered 
   #  with the dispatch hash.  
   #
   # Parameters:
   #    user_input   - The request received from the client (lonc).
   # Returns:
   #    true to keep processing, false if caller should exit.
   #
   sub process_request {
       my ($userinput) = @_;      # Easier for now to break style than to
                                   # fix all the userinput -> user_input.
       my $wasenc    = 0; # True if request was encrypted.
   # ------------------------------------------------------------ See if encrypted
       if ($userinput =~ /^enc/) {
    $userinput = decipher($userinput);
    $wasenc=1;
    if(!$userinput) { # Cipher not defined.
       &Failure($client, "error: Encrypted data without negotated key");
       return 0;
    }
       }
       Debug("process_request: $userinput\n");
       
       #  
       #   The 'correct way' to add a command to lond is now to
       #   write a sub to execute it and Add it to the command dispatch
       #   hash via a call to register_handler..  The comments to that
       #   sub should give you enough to go on to show how to do this
       #   along with the examples that are building up as this code
       #   is getting refactored.   Until all branches of the
       #   if/elseif monster below have been factored out into
       #   separate procesor subs, if the dispatch hash is missing
       #   the command keyword, we will fall through to the remainder
       #   of the if/else chain below in order to keep this thing in 
       #   working order throughout the transmogrification.
   
       my ($command, $tail) = split(/:/, $userinput, 2);
       chomp($command);
       chomp($tail);
       $tail =~ s/(\r)//; # This helps people debugging with e.g. telnet.
       $command =~ s/(\r)//; # And this too for parameterless commands.
       if(!$tail) {
    $tail =""; # defined but blank.
       }
   
       &Debug("Command received: $command, encoded = $wasenc");
   
       if(defined $Dispatcher{$command}) {
   
    my $dispatch_info = $Dispatcher{$command};
    my $handler       = $$dispatch_info[0];
    my $need_encode   = $$dispatch_info[1];
    my $client_types  = $$dispatch_info[2];
    Debug("Matched dispatch hash: mustencode: $need_encode "
         ."ClientType $client_types");
         
    #  Validate the request:
         
    my $ok = 1;
    my $requesterprivs = 0;
    if(&isClient()) {
       $requesterprivs |= $CLIENT_OK;
    }
    if(&isManager()) {
       $requesterprivs |= $MANAGER_OK;
    }
    if($need_encode && (!$wasenc)) {
       Debug("Must encode but wasn't: $need_encode $wasenc");
       $ok = 0;
    }
    if(($client_types & $requesterprivs) == 0) {
       Debug("Client not privileged to do this operation");
       $ok = 0;
    }
   
    if($ok) {
       Debug("Dispatching to handler $command $tail");
       my $keep_going = &$handler($command, $tail, $client);
       return $keep_going;
    } else {
       Debug("Refusing to dispatch because client did not match requirements");
       Failure($client, "refused\n", $userinput);
       return 1;
    }
   
       }    
   
   #------------------- Commands not yet in spearate handlers. --------------
   
   
   
   # -------------------------------------------------------------------- makeuser
       if ($userinput =~ /^makeuser/) { # encoded and client.
    &Debug("Make user received");
    my $oldumask=umask(0077);
    if (($wasenc==1) && isClient) {
       my 
    ($cmd,$udom,$uname,$umode,$npass)=split(/:/,$userinput);
       &Debug("cmd =".$cmd." $udom =".$udom.
      " uname=".$uname);
       chomp($npass);
       $npass=&unescape($npass);
       my $proname=propath($udom,$uname);
       my $passfilename="$proname/passwd";
       &Debug("Password file created will be:".
      $passfilename);
       if (-e $passfilename) {
    print $client "already_exists\n";
       } elsif ($udom ne $currentdomainid) {
    print $client "not_right_domain\n";
       } else {
    my @fpparts=split(/\//,$proname);
    my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2];
    my $fperror='';
    for (my $i=3;$i<=$#fpparts;$i++) {
       $fpnow.='/'.$fpparts[$i]; 
       unless (-e $fpnow) {
    unless (mkdir($fpnow,0777)) {
       $fperror="error: ".($!+0)
    ." mkdir failed while attempting "
    ."makeuser";
    }
       }
    }
    unless ($fperror) {
       my $result=&make_passwd_file($uname, $umode,$npass,
    $passfilename);
       print $client $result;
    } else {
       print $client "$fperror\n";
    }
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
    umask($oldumask);
   # -------------------------------------------------------------- changeuserauth
       } elsif ($userinput =~ /^changeuserauth/) { # encoded & client
    &Debug("Changing authorization");
    if (($wasenc==1) && isClient) {
       my 
    ($cmd,$udom,$uname,$umode,$npass)=split(/:/,$userinput);
       chomp($npass);
       &Debug("cmd = ".$cmd." domain= ".$udom.
      "uname =".$uname." umode= ".$umode);
       $npass=&unescape($npass);
       my $proname=&propath($udom,$uname);
       my $passfilename="$proname/passwd";
       if ($udom ne $currentdomainid) {
    print $client "not_right_domain\n";
       } else {
    my $result=&make_passwd_file($uname, $umode,$npass,
        $passfilename);
    Reply($client, $result, $userinput);
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------------ home
       } elsif ($userinput =~ /^home/) { # client clear or encoded
    if(isClient) {
       my ($cmd,$udom,$uname)=split(/:/,$userinput);
       chomp($uname);
       my $proname=propath($udom,$uname);
       if (-e $proname) {
    print $client "found\n";
       } else {
    print $client "not_found\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ---------------------------------------------------------------------- update
       } elsif ($userinput =~ /^update/) { # client clear or encoded.
    if(isClient) {
       my ($cmd,$fname)=split(/:/,$userinput);
       my $ownership=ishome($fname);
       if ($ownership eq 'not_owner') {
    if (-e $fname) {
       my ($dev,$ino,$mode,$nlink,
    $uid,$gid,$rdev,$size,
    $atime,$mtime,$ctime,
    $blksize,$blocks)=stat($fname);
       my $now=time;
       my $since=$now-$atime;
       if ($since>$perlvar{'lonExpire'}) {
    my $reply=
       &reply("unsub:$fname","$clientname");
       unlink("$fname");
       } else {
    my $transname="$fname.in.transfer";
    my $remoteurl=
       &reply("sub:$fname","$clientname");
    my $response;
    {
       my $ua=new LWP::UserAgent;
       my $request=new HTTP::Request('GET',"$remoteurl");
       $response=$ua->request($request,$transname);
    }
    if ($response->is_error()) {
       unlink($transname);
       my $message=$response->status_line;
       &logthis(
        "LWP GET: $message for $fname ($remoteurl)");
    } else {
       if ($remoteurl!~/\.meta$/) {
    my $ua=new LWP::UserAgent;
    my $mrequest=
       new HTTP::Request('GET',$remoteurl.'.meta');
    my $mresponse=
       $ua->request($mrequest,$fname.'.meta');
    if ($mresponse->is_error()) {
       unlink($fname.'.meta');
    }
       }
       rename($transname,$fname);
    }
       }
       print $client "ok\n";
    } else {
       print $client "not_found\n";
    }
       } else {
    print $client "rejected\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # -------------------------------------- fetch a user file from a remote server
       } elsif ($userinput =~ /^fetchuserfile/) { # Client clear or enc.
    if(isClient) {
       my ($cmd,$fname)=split(/:/,$userinput);
       my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|);
       my $udir=propath($udom,$uname).'/userfiles';
       unless (-e $udir) { mkdir($udir,0770); }
       if (-e $udir) {
    $ufile=~s/^[\.\~]+//;
    my $path = $udir;
    if ($ufile =~m|(.+)/([^/]+)$|) {
       my @parts=split('/',$1);
       foreach my $part (@parts) {
    $path .= '/'.$part;
    if ((-e $path)!=1) {
       mkdir($path,0770);
    }
       }
    }
    my $destname=$udir.'/'.$ufile;
    my $transname=$udir.'/'.$ufile.'.in.transit';
    my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;
    my $response;
    {
       my $ua=new LWP::UserAgent;
       my $request=new HTTP::Request('GET',"$remoteurl");
       $response=$ua->request($request,$transname);
    }
    if ($response->is_error()) {
       unlink($transname);
       my $message=$response->status_line;
       &logthis("LWP GET: $message for $fname ($remoteurl)");
       print $client "failed\n";
    } else {
       if (!rename($transname,$destname)) {
    &logthis("Unable to move $transname to $destname");
    unlink($transname);
    print $client "failed\n";
       } else {
    print $client "ok\n";
       }
    }
       } else {
    print $client "not_home\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
    }
   # --------------------------------------------------------- remove a user file 
       } elsif ($userinput =~ /^removeuserfile/) { # Client clear or enc.
    if(isClient) {
       my ($cmd,$fname)=split(/:/,$userinput);
       my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|);
       &logthis("$udom - $uname - $ufile");
       if ($ufile =~m|/\.\./|) {
    # any files paths with /../ in them refuse 
    # to deal with
    print $client "refused\n";
       } else {
    my $udir=propath($udom,$uname);
    if (-e $udir) {
       my $file=$udir.'/userfiles/'.$ufile;
       if (-e $file) {
    unlink($file);
    if (-e $file) {
       print $client "failed\n";
    } else {
       print $client "ok\n";
    }
       } else {
    print $client "not_found\n";
       }
    } else {
       print $client "not_home\n";
    }
       }
    } else {
       Reply($client, "refused\n", $userinput);
    }
   # ------------------------------------------ authenticate access to a user file
       } elsif ($userinput =~ /^tokenauthuserfile/) { # Client only
    if(isClient) {
       my ($cmd,$fname,$session)=split(/:/,$userinput);
       chomp($session);
       my $reply='non_auth';
       if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'.
        $session.'.id')) {
    while (my $line=<ENVIN>) {
       if ($line=~ m|userfile\.\Q$fname\E\=|) { $reply='ok'; }
       }
    close(ENVIN);
    print $client $reply."\n";
       } else {
    print $client "invalid_token\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ----------------------------------------------------------------- unsubscribe
       } elsif ($userinput =~ /^unsub/) {
    if(isClient) {
       my ($cmd,$fname)=split(/:/,$userinput);
       if (-e $fname) {
    print $client &unsub($fname,$clientip);
       } else {
    print $client "not_found\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------- subscribe
       } elsif ($userinput =~ /^sub/) {
    if(isClient) {
       print $client &subscribe($userinput,$clientip);
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------- current version
       } elsif ($userinput =~ /^currentversion/) {
    if(isClient) {
       my ($cmd,$fname)=split(/:/,$userinput);
       print $client &currentversion($fname)."\n";
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------------- log
       } elsif ($userinput =~ /^log/) {
    if(isClient) {
       my ($cmd,$udom,$uname,$what)=split(/:/,$userinput);
       chomp($what);
       my $proname=propath($udom,$uname);
       my $now=time;
       {
    my $hfh;
    if ($hfh=IO::File->new(">>$proname/activity.log")) { 
       print $hfh "$now:$clientname:$what\n";
       print $client "ok\n"; 
    } else {
       print $client "error: ".($!+0)
    ." IO::File->new Failed "
    ."while attempting log\n";
    }
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------------- put
       } elsif ($userinput =~ /^put/) {
    if(isClient) {
       my ($cmd,$udom,$uname,$namespace,$what)
    =split(/:/,$userinput,5);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       if ($namespace ne 'roles') {
    chomp($what);
    my $proname=propath($udom,$uname);
    my $now=time;
    my @pairs=split(/\&/,$what);
    my %hash;
    if (tie(%hash,'GDBM_File',
    "$proname/$namespace.db",
    &GDBM_WRCREAT(),0640)) {
       unless ($namespace=~/^nohist\_/) {
    my $hfh;
    if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { print $hfh "P:$now:$what\n"; }
       }
       
       foreach my $pair (@pairs) {
    my ($key,$value)=split(/=/,$pair);
    $hash{$key}=$value;
       }
       if (untie(%hash)) {
    print $client "ok\n";
       } else {
    print $client "error: ".($!+0)
       ." untie(GDBM) failed ".
       "while attempting put\n";
       }
    } else {
       print $client "error: ".($!)
    ." tie(GDBM) Failed ".
    "while attempting put\n";
    }
       } else {
    print $client "refused\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------- inc
       } elsif ($userinput =~ /^inc:/) {
    if(isClient) {
       my ($cmd,$udom,$uname,$namespace,$what)
    =split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       if ($namespace ne 'roles') {
    chomp($what);
    my $proname=propath($udom,$uname);
    my $now=time;
    my @pairs=split(/\&/,$what);
    my %hash;
    if (tie(%hash,'GDBM_File',
    "$proname/$namespace.db",
    &GDBM_WRCREAT(),0640)) {
       unless ($namespace=~/^nohist\_/) {
    my $hfh;
    if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { print $hfh "P:$now:$what\n"; }
       }
       foreach my $pair (@pairs) {
    my ($key,$value)=split(/=/,$pair);
    # We could check that we have a number...
    if (! defined($value) || $value eq '') {
       $value = 1;
    }
    $hash{$key}+=$value;
       }
       if (untie(%hash)) {
    print $client "ok\n";
       } else {
    print $client "error: ".($!+0)
       ." untie(GDBM) failed ".
       "while attempting inc\n";
       }
    } else {
       print $client "error: ".($!)
    ." tie(GDBM) Failed ".
    "while attempting inc\n";
    }
       } else {
    print $client "refused\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # -------------------------------------------------------------------- rolesput
       } elsif ($userinput =~ /^rolesput/) {
    if(isClient) {
       &Debug("rolesput");
       if ($wasenc==1) {
    my ($cmd,$exedom,$exeuser,$udom,$uname,$what)
       =split(/:/,$userinput);
    &Debug("cmd = ".$cmd." exedom= ".$exedom.
          "user = ".$exeuser." udom=".$udom.
          "what = ".$what);
    my $namespace='roles';
    chomp($what);
    my $proname=propath($udom,$uname);
    my $now=time;
    my @pairs=split(/\&/,$what);
    my %hash;
    if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {
       {
    my $hfh;
    if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { 
       print $hfh "P:$now:$exedom:$exeuser:$what\n";
    }
       }
       
       foreach my $pair (@pairs) {
    my ($key,$value)=split(/=/,$pair);
    &ManagePermissions($key, $udom, $uname,
      &get_auth_type( $udom, 
    $uname));
    $hash{$key}=$value;
       }
       if (untie(%hash)) {
    print $client "ok\n";
       } else {
    print $client "error: ".($!+0)
       ." untie(GDBM) Failed ".
       "while attempting rolesput\n";
       }
    } else {
       print $client "error: ".($!+0)
    ." tie(GDBM) Failed ".
    "while attempting rolesput\n";
       }
       } else {
    print $client "refused\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # -------------------------------------------------------------------- rolesdel
       } elsif ($userinput =~ /^rolesdel/) {
    if(isClient) {
       &Debug("rolesdel");
       if ($wasenc==1) {
    my ($cmd,$exedom,$exeuser,$udom,$uname,$what)
       =split(/:/,$userinput);
    &Debug("cmd = ".$cmd." exedom= ".$exedom.
          "user = ".$exeuser." udom=".$udom.
          "what = ".$what);
    my $namespace='roles';
    chomp($what);
    my $proname=propath($udom,$uname);
    my $now=time;
    my @rolekeys=split(/\&/,$what);
    my %hash;
    if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {
       {
    my $hfh;
    if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { 
       print $hfh "D:$now:$exedom:$exeuser:$what\n";
    }
       }
       foreach my $key (@rolekeys) {
    delete $hash{$key};
       }
       if (untie(%hash)) {
    print $client "ok\n";
       } else {
    print $client "error: ".($!+0)
       ." untie(GDBM) Failed ".
       "while attempting rolesdel\n";
       }
    } else {
       print $client "error: ".($!+0)
    ." tie(GDBM) Failed ".
    "while attempting rolesdel\n";
    }
       } else {
    print $client "refused\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------------- get
       } elsif ($userinput =~ /^get/) {
    if(isClient) {
       my ($cmd,$udom,$uname,$namespace,$what)
    =split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       chomp($what);
       my @queries=split(/\&/,$what);
       my $proname=propath($udom,$uname);
       my $qresult='';
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {
    for (my $i=0;$i<=$#queries;$i++) {
       $qresult.="$hash{$queries[$i]}&";
    }
    if (untie(%hash)) {
       $qresult=~s/\&$//;
       print $client "$qresult\n";
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting get\n";
    }
       } else {
    if ($!+0 == 2) {
       print $client "error:No such file or ".
    "GDBM reported bad block error\n";
    } else {
       print $client "error: ".($!+0)
    ." tie(GDBM) Failed ".
    "while attempting get\n";
    }
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------------ eget
       } elsif ($userinput =~ /^eget/) {
    if (isClient) {
       my ($cmd,$udom,$uname,$namespace,$what)
    =split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       chomp($what);
       my @queries=split(/\&/,$what);
       my $proname=propath($udom,$uname);
       my $qresult='';
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {
    for (my $i=0;$i<=$#queries;$i++) {
       $qresult.="$hash{$queries[$i]}&";
    }
    if (untie(%hash)) {
       $qresult=~s/\&$//;
       if ($cipher) {
    my $cmdlength=length($qresult);
    $qresult.="         ";
    my $encqresult='';
    for 
       (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {
    $encqresult.=
       unpack("H16",
      $cipher->encrypt(substr($qresult,$encidx,8)));
       }
    print $client "enc:$cmdlength:$encqresult\n";
       } else {
    print $client "error:no_key\n";
       }
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting eget\n";
    }
       } else {
    print $client "error: ".($!+0)
       ." tie(GDBM) Failed ".
       "while attempting eget\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------------- del
       } elsif ($userinput =~ /^del/) {
    if(isClient) {
       my ($cmd,$udom,$uname,$namespace,$what)
    =split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       chomp($what);
       my $proname=propath($udom,$uname);
       my $now=time;
       my @keys=split(/\&/,$what);
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {
    unless ($namespace=~/^nohist\_/) {
       my $hfh;
       if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { print $hfh "D:$now:$what\n"; }
    }
    foreach my $key (@keys) {
       delete($hash{$key});
    }
    if (untie(%hash)) {
       print $client "ok\n";
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting del\n";
    }
       } else {
    print $client "error: ".($!+0)
       ." tie(GDBM) Failed ".
       "while attempting del\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------------ keys
       } elsif ($userinput =~ /^keys/) {
    if(isClient) {
       my ($cmd,$udom,$uname,$namespace)
    =split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       my $proname=propath($udom,$uname);
       my $qresult='';
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {
    foreach my $key (keys %hash) {
       $qresult.="$key&";
    }
    if (untie(%hash)) {
       $qresult=~s/\&$//;
       print $client "$qresult\n";
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting keys\n";
    }
       } else {
    print $client "error: ".($!+0)
       ." tie(GDBM) Failed ".
       "while attempting keys\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ----------------------------------------------------------------- dumpcurrent
       } elsif ($userinput =~ /^currentdump/) {
    if (isClient) {
       my ($cmd,$udom,$uname,$namespace)
    =split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       my $qresult='';
       my $proname=propath($udom,$uname);
       my %hash;
       if (tie(%hash,'GDBM_File',
       "$proname/$namespace.db",
       &GDBM_READER(),0640)) {
       # Structure of %data:
    # $data{$symb}->{$parameter}=$value;
    # $data{$symb}->{'v.'.$parameter}=$version;
    # since $parameter will be unescaped, we do not
    # have to worry about silly parameter names...
    my %data = ();
    while (my ($key,$value) = each(%hash)) {
       my ($v,$symb,$param) = split(/:/,$key);
       next if ($v eq 'version' || $symb eq 'keys');
       next if (exists($data{$symb}) && 
        exists($data{$symb}->{$param}) &&
        $data{$symb}->{'v.'.$param} > $v);
       $data{$symb}->{$param}=$value;
       $data{$symb}->{'v.'.$param}=$v;
    }
    if (untie(%hash)) {
       while (my ($symb,$param_hash) = each(%data)) {
    while(my ($param,$value) = each (%$param_hash)){
       next if ($param =~ /^v\./);
       $qresult.=$symb.':'.$param.'='.$value.'&';
    }
       }
       chop($qresult);
       print $client "$qresult\n";
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting currentdump\n";
    }
       } else {
    print $client "error: ".($!+0)
       ." tie(GDBM) Failed ".
       "while attempting currentdump\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
    }
   # ------------------------------------------------------------------------ dump
       } elsif ($userinput =~ /^dump/) {
    if(isClient) {
       my ($cmd,$udom,$uname,$namespace,$regexp)
    =split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       if (defined($regexp)) {
    $regexp=&unescape($regexp);
       } else {
    $regexp='.';
       }
       my $qresult='';
       my $proname=propath($udom,$uname);
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {
    while (my ($key,$value) = each(%hash)) {
       if ($regexp eq '.') {
    $qresult.=$key.'='.$value.'&';
       } else {
    my $unescapeKey = &unescape($key);
    if (eval('$unescapeKey=~/$regexp/')) {
       $qresult.="$key=$value&";
    }
       }
    }
    if (untie(%hash)) {
       chop($qresult);
       print $client "$qresult\n";
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting dump\n";
    }
       } else {
    print $client "error: ".($!+0)
       ." tie(GDBM) Failed ".
       "while attempting dump\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ----------------------------------------------------------------------- store
       } elsif ($userinput =~ /^store/) {
    if(isClient) {
       my ($cmd,$udom,$uname,$namespace,$rid,$what)
    =split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       if ($namespace ne 'roles') {
    chomp($what);
    my $proname=propath($udom,$uname);
    my $now=time;
    my @pairs=split(/\&/,$what);
    my %hash;
    if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {
       unless ($namespace=~/^nohist\_/) {
    my $hfh;
    if ($hfh=IO::File->new(">>$proname/$namespace.hist")) {
       print $hfh "P:$now:$rid:$what\n";
    }
       }
       my @previouskeys=split(/&/,$hash{"keys:$rid"});
       my $key;
       $hash{"version:$rid"}++;
       my $version=$hash{"version:$rid"};
       my $allkeys=''; 
       foreach my $pair (@pairs) {
    my ($key,$value)=split(/=/,$pair);
    $allkeys.=$key.':';
    $hash{"$version:$rid:$key"}=$value;
       }
       $hash{"$version:$rid:timestamp"}=$now;
       $allkeys.='timestamp';
       $hash{"$version:keys:$rid"}=$allkeys;
       if (untie(%hash)) {
    print $client "ok\n";
       } else {
    print $client "error: ".($!+0)
       ." untie(GDBM) Failed ".
       "while attempting store\n";
    }
    } else {
       print $client "error: ".($!+0)
    ." tie(GDBM) Failed ".
    "while attempting store\n";
    }
       } else {
    print $client "refused\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # --------------------------------------------------------------------- restore
       } elsif ($userinput =~ /^restore/) {
    if(isClient) {
       my ($cmd,$udom,$uname,$namespace,$rid)
    =split(/:/,$userinput);
       $namespace=~s/\//\_/g;
       $namespace=~s/\W//g;
       chomp($rid);
       my $proname=propath($udom,$uname);
       my $qresult='';
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {
    my $version=$hash{"version:$rid"};
    $qresult.="version=$version&";
    my $scope;
    for ($scope=1;$scope<=$version;$scope++) {
       my $vkeys=$hash{"$scope:keys:$rid"};
       my @keys=split(/:/,$vkeys);
       my $key;
       $qresult.="$scope:keys=$vkeys&";
       foreach $key (@keys) {
    $qresult.="$scope:$key=".$hash{"$scope:$rid:$key"}."&";
       }                                  
    }
    if (untie(%hash)) {
       $qresult=~s/\&$//;
       print $client "$qresult\n";
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting restore\n";
    }
       } else {
    print $client "error: ".($!+0)
       ." tie(GDBM) Failed ".
       "while attempting restore\n";
       }
    } else  {
       Reply($client, "refused\n", $userinput);
       
    }
   # -------------------------------------------------------------------- chatsend
       } elsif ($userinput =~ /^chatsend/) {
    if(isClient) {
       my ($cmd,$cdom,$cnum,$newpost)=split(/\:/,$userinput);
       &chatadd($cdom,$cnum,$newpost);
       print $client "ok\n";
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # -------------------------------------------------------------------- chatretr
       } elsif ($userinput =~ /^chatretr/) {
    if(isClient) {
       my 
    ($cmd,$cdom,$cnum,$udom,$uname)=split(/\:/,$userinput);
       my $reply='';
       foreach (&getchat($cdom,$cnum,$udom,$uname)) {
    $reply.=&escape($_).':';
       }
       $reply=~s/\:$//;
       print $client $reply."\n";
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------- querysend
       } elsif ($userinput =~ /^querysend/) {
    if (isClient) {
       my ($cmd,$query,
    $arg1,$arg2,$arg3)=split(/\:/,$userinput);
       $query=~s/\n*$//g;
       print $client "".
    sqlreply("$clientname\&$query".
    "\&$arg1"."\&$arg2"."\&$arg3")."\n";
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------ queryreply
       } elsif ($userinput =~ /^queryreply/) {
    if(isClient) {
       my ($cmd,$id,$reply)=split(/:/,$userinput); 
       my $store;
       my $execdir=$perlvar{'lonDaemons'};
       if ($store=IO::File->new(">$execdir/tmp/$id")) {
    $reply=~s/\&/\n/g;
    print $store $reply;
    close $store;
    my $store2=IO::File->new(">$execdir/tmp/$id.end");
    print $store2 "done\n";
    close $store2;
    print $client "ok\n";
       } else {
    print $client "error: ".($!+0)
       ." IO::File->new Failed ".
       "while attempting queryreply\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ----------------------------------------------------------------- courseidput
       } elsif ($userinput =~ /^courseidput/) {
    if(isClient) {
       my ($cmd,$udom,$what)=split(/:/,$userinput);
       chomp($what);
    $udom=~s/\W//g;
       my $proname=
    "$perlvar{'lonUsersDir'}/$udom/nohist_courseids";
       my $now=time;
       my @pairs=split(/\&/,$what);
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) {
    foreach my $pair (@pairs) {
       my ($key,$descr,$inst_code)=split(/=/,$pair);
       $hash{$key}=$descr.':'.$inst_code.':'.$now;
    }
    if (untie(%hash)) {
       print $client "ok\n";
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting courseidput\n";
    }
       } else {
    print $client "error: ".($!+0)
       ." tie(GDBM) Failed ".
       "while attempting courseidput\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ---------------------------------------------------------------- courseiddump
       } elsif ($userinput =~ /^courseiddump/) {
    if(isClient) {
       my ($cmd,$udom,$since,$description)
    =split(/:/,$userinput);
       if (defined($description)) {
    $description=&unescape($description);
       } else {
    $description='.';
       }
       unless (defined($since)) { $since=0; }
       my $qresult='';
       my $proname=
    "$perlvar{'lonUsersDir'}/$udom/nohist_courseids";
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) {
    while (my ($key,$value) = each(%hash)) {
       my ($descr,$lasttime,$inst_code);
       if ($value =~ m/^([^\:]*):([^\:]*):(\d+)$/) {
    ($descr,$inst_code,$lasttime)=($1,$2,$3);
       } else {
    ($descr,$lasttime) = split(/\:/,$value);
       }
       if ($lasttime<$since) { next; }
       if ($description eq '.') {
    $qresult.=$key.'='.$descr.':'.$inst_code.'&';
       } else {
    my $unescapeVal = &unescape($descr);
    if (eval('$unescapeVal=~/\Q$description\E/i')) {
       $qresult.=$key.'='.$descr.':'.$inst_code.'&';
    }
       }
    }
    if (untie(%hash)) {
       chop($qresult);
       print $client "$qresult\n";
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting courseiddump\n";
    }
       } else {
    print $client "error: ".($!+0)
       ." tie(GDBM) Failed ".
       "while attempting courseiddump\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ----------------------------------------------------------------------- idput
       } elsif ($userinput =~ /^idput/) {
    if(isClient) {
       my ($cmd,$udom,$what)=split(/:/,$userinput);
       chomp($what);
       $udom=~s/\W//g;
       my $proname="$perlvar{'lonUsersDir'}/$udom/ids";
       my $now=time;
       my @pairs=split(/\&/,$what);
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) {
    {
       my $hfh;
       if ($hfh=IO::File->new(">>$proname.hist")) {
    print $hfh "P:$now:$what\n";
       }
    }
    foreach my $pair (@pairs) {
       my ($key,$value)=split(/=/,$pair);
       $hash{$key}=$value;
    }
    if (untie(%hash)) {
       print $client "ok\n";
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting idput\n";
    }
       } else {
    print $client "error: ".($!+0)
       ." tie(GDBM) Failed ".
       "while attempting idput\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ----------------------------------------------------------------------- idget
       } elsif ($userinput =~ /^idget/) {
    if(isClient) {
       my ($cmd,$udom,$what)=split(/:/,$userinput);
       chomp($what);
       $udom=~s/\W//g;
       my $proname="$perlvar{'lonUsersDir'}/$udom/ids";
       my @queries=split(/\&/,$what);
       my $qresult='';
       my %hash;
       if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) {
    for (my $i=0;$i<=$#queries;$i++) {
       $qresult.="$hash{$queries[$i]}&";
    }
    if (untie(%hash)) {
       $qresult=~s/\&$//;
       print $client "$qresult\n";
    } else {
       print $client "error: ".($!+0)
    ." untie(GDBM) Failed ".
    "while attempting idget\n";
    }
       } else {
    print $client "error: ".($!+0)
       ." tie(GDBM) Failed ".
       "while attempting idget\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ---------------------------------------------------------------------- tmpput
       } elsif ($userinput =~ /^tmpput/) {
    if(isClient) {
       my ($cmd,$what)=split(/:/,$userinput);
       my $store;
       $tmpsnum++;
       my $id=$$.'_'.$clientip.'_'.$tmpsnum;
       $id=~s/\W/\_/g;
       $what=~s/\n//g;
       my $execdir=$perlvar{'lonDaemons'};
       if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) {
    print $store $what;
    close $store;
    print $client "$id\n";
       }
       else {
    print $client "error: ".($!+0)
       ."IO::File->new Failed ".
       "while attempting tmpput\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   
   # ---------------------------------------------------------------------- tmpget
       } elsif ($userinput =~ /^tmpget/) {
    if(isClient) {
       my ($cmd,$id)=split(/:/,$userinput);
       chomp($id);
       $id=~s/\W/\_/g;
       my $store;
       my $execdir=$perlvar{'lonDaemons'};
       if ($store=IO::File->new("$execdir/tmp/$id.tmp")) {
    my $reply=<$store>;
       print $client "$reply\n";
    close $store;
       }
       else {
    print $client "error: ".($!+0)
       ."IO::File->new Failed ".
       "while attempting tmpget\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ---------------------------------------------------------------------- tmpdel
       } elsif ($userinput =~ /^tmpdel/) {
    if(isClient) {
       my ($cmd,$id)=split(/:/,$userinput);
       chomp($id);
       $id=~s/\W/\_/g;
       my $execdir=$perlvar{'lonDaemons'};
       if (unlink("$execdir/tmp/$id.tmp")) {
    print $client "ok\n";
       } else {
    print $client "error: ".($!+0)
       ."Unlink tmp Failed ".
       "while attempting tmpdel\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ----------------------------------------- portfolio directory list (portls)
       } elsif ($userinput =~ /^portls/) {
    if(isClient) {
       my ($cmd,$uname,$udom)=split(/:/,$userinput);
       my $udir=propath($udom,$uname).'/userfiles/portfolio';
       my $dirLine='';
       my $dirContents='';
       if (opendir(LSDIR,$udir.'/')){
    while ($dirLine = readdir(LSDIR)){
       $dirContents = $dirContents.$dirLine.'<br />';
    }
       } else {
    $dirContents = "No directory found\n";
       }
       print $client $dirContents."\n";
    } else {
       Reply($client, "refused\n", $userinput);
    }
   # -------------------------------------------------------------------------- ls
       } elsif ($userinput =~ /^ls/) {
    if(isClient) {
       my $obs;
       my $rights;
       my ($cmd,$ulsdir)=split(/:/,$userinput);
       my $ulsout='';
       my $ulsfn;
       if (-e $ulsdir) {
    if(-d $ulsdir) {
       if (opendir(LSDIR,$ulsdir)) {
    while ($ulsfn=readdir(LSDIR)) {
       undef $obs, $rights; 
       my @ulsstats=stat($ulsdir.'/'.$ulsfn);
       #We do some obsolete checking here
       if(-e $ulsdir.'/'.$ulsfn.".meta") { 
    open(FILE, $ulsdir.'/'.$ulsfn.".meta");
    my @obsolete=<FILE>;
    foreach my $obsolete (@obsolete) {
       if($obsolete =~ m|(<obsolete>)(on)|) { $obs = 1; } 
       if($obsolete =~ m|(<copyright>)(default)|) { $rights = 1; }
    }
       }
       $ulsout.=$ulsfn.'&'.join('&',@ulsstats);
       if($obs eq '1') { $ulsout.="&1"; }
       else { $ulsout.="&0"; }
       if($rights eq '1') { $ulsout.="&1:"; }
       else { $ulsout.="&0:"; }
    }
    closedir(LSDIR);
       }
    } else {
       my @ulsstats=stat($ulsdir);
       $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
    }
       } else {
    $ulsout='no_such_dir';
       }
       if ($ulsout eq '') { $ulsout='empty'; }
       print $client "$ulsout\n";
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ----------------------------------------------------------------- setannounce
       } elsif ($userinput =~ /^setannounce/) {
    if (isClient) {
       my ($cmd,$announcement)=split(/:/,$userinput);
       chomp($announcement);
       $announcement=&unescape($announcement);
       if (my $store=IO::File->new('>'.$perlvar{'lonDocRoot'}.
    '/announcement.txt')) {
    print $store $announcement;
    close $store;
    print $client "ok\n";
       } else {
    print $client "error: ".($!+0)."\n";
       }
    } else {
       Reply($client, "refused\n", $userinput);
       
    }
   # ------------------------------------------------------------------ Hanging up
       } elsif (($userinput =~ /^exit/) ||
        ($userinput =~ /^init/)) { # no restrictions.
    &logthis(
    "Client $clientip ($clientname) hanging up: $userinput");
    print $client "bye\n";
    $client->shutdown(2);        # shutdown the socket forcibly.
    $client->close();
    return 0;
   
   # ---------------------------------- set current host/domain
       } elsif ($userinput =~ /^sethost:/) {
    if (isClient) {
       print $client &sethost($userinput)."\n";
    } else {
       print $client "refused\n";
    }
   #---------------------------------- request file (?) version.
       } elsif ($userinput =~/^version:/) {
    if (isClient) {
       print $client &version($userinput)."\n";
    } else {
       print $client "refused\n";
    }
   #------------------------------- is auto-enrollment enabled?
       } elsif ($userinput =~/^autorun:/) {
    if (isClient) {
       my ($cmd,$cdom) = split(/:/,$userinput);
       my $outcome = &localenroll::run($cdom);
       print $client "$outcome\n";
    } else {
       print $client "0\n";
    }
   #------------------------------- get official sections (for auto-enrollment).
       } elsif ($userinput =~/^autogetsections:/) {
    if (isClient) {
       my ($cmd,$coursecode,$cdom)=split(/:/,$userinput);
       my @secs = &localenroll::get_sections($coursecode,$cdom);
       my $seclist = &escape(join(':',@secs));
       print $client "$seclist\n";
    } else {
       print $client "refused\n";
    }
   #----------------------- validate owner of new course section (for auto-enrollment).
       } elsif ($userinput =~/^autonewcourse:/) {
    if (isClient) {
       my ($cmd,$inst_course_id,$owner,$cdom)=split(/:/,$userinput);
       my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom);
       print $client "$outcome\n";
    } else {
       print $client "refused\n";
    }
   #-------------- validate course section in schedule of classes (for auto-enrollment).
       } elsif ($userinput =~/^autovalidatecourse:/) {
    if (isClient) {
       my ($cmd,$inst_course_id,$cdom)=split(/:/,$userinput);
       my $outcome=&localenroll::validate_courseID($inst_course_id,$cdom);
       print $client "$outcome\n";
    } else {
       print $client "refused\n";
    }
   #--------------------------- create password for new user (for auto-enrollment).
       } elsif ($userinput =~/^autocreatepassword:/) {
    if (isClient) {
       my ($cmd,$authparam,$cdom)=split(/:/,$userinput);
       my ($create_passwd,$authchk);
       ($authparam,$create_passwd,$authchk) = &localenroll::create_password($authparam,$cdom);
       print $client &escape($authparam.':'.$create_passwd.':'.$authchk)."\n";
    } else {
       print $client "refused\n";
    }
   #---------------------------  read and remove temporary files (for auto-enrollment).
       } elsif ($userinput =~/^autoretrieve:/) {
    if (isClient) {
       my ($cmd,$filename) = split(/:/,$userinput);
       my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename;
       if ( (-e $source) && ($filename ne '') ) {
    my $reply = '';
    if (open(my $fh,$source)) {
       while (<$fh>) {
    chomp($_);
    $_ =~ s/^\s+//g;
    $_ =~ s/\s+$//g;
    $reply .= $_;
       }
       close($fh);
       print $client &escape($reply)."\n";
   #                                unlink($source);
    } else {
       print $client "error\n";
    }
       } else {
    print $client "error\n";
       }
    } else {
       print $client "refused\n";
    }
   #---------------------  read and retrieve institutional code format (for support form).
       } elsif ($userinput =~/^autoinstcodeformat:/) {
    if (isClient) {
       my $reply;
       my($cmd,$cdom,$course) = split(/:/,$userinput);
       my @pairs = split/\&/,$course;
       my %instcodes = ();
       my %codes = ();
       my @codetitles = ();
       my %cat_titles = ();
       my %cat_order = ();
       foreach (@pairs) {
    my ($key,$value) = split/=/,$_;
    $instcodes{&unescape($key)} = &unescape($value);
       }
       my $formatreply = &localenroll::instcode_format($cdom,\%instcodes,\%codes,\@codetitles,\%cat_titles,\%cat_order);
       if ($formatreply eq 'ok') {
    my $codes_str = &hash2str(%codes);
    my $codetitles_str = &array2str(@codetitles);
    my $cat_titles_str = &hash2str(%cat_titles);
    my $cat_order_str = &hash2str(%cat_order);
    print $client $codes_str.':'.$codetitles_str.':'.$cat_titles_str.':'.$cat_order_str."\n";
       }
    } else {
       print $client "refused\n";
    }
   # ------------------------------------------------------------- unknown command
   
       } else {
    # unknown command
    print $client "unknown_cmd\n";
       }
   # -------------------------------------------------------------------- complete
       Debug("process_request - returning 1");
       return 1;
   }
   #
   #   Decipher encoded traffic
   #  Parameters:
   #     input      - Encoded data.
   #  Returns:
   #     Decoded data or undef if encryption key was not yet negotiated.
   #  Implicit input:
   #     cipher  - This global holds the negotiated encryption key.
   #
   sub decipher {
       my ($input)  = @_;
       my $output = '';
       
       
       if($cipher) {
    my($enc, $enclength, $encinput) = split(/:/, $input);
    for(my $encidx = 0; $encidx < length($encinput); $encidx += 16) {
       $output .= 
    $cipher->decrypt(pack("H16", substr($encinput, $encidx, 16)));
    }
    return substr($output, 0, $enclength);
       } else {
    return undef;
       }
   }
   
   #
   #   Register a command processor.  This function is invoked to register a sub
   #   to process a request.  Once registered, the ProcessRequest sub can automatically
   #   dispatch requests to an appropriate sub, and do the top level validity checking
   #   as well:
   #    - Is the keyword recognized.
   #    - Is the proper client type attempting the request.
   #    - Is the request encrypted if it has to be.
   #   Parameters:
   #    $request_name         - Name of the request being registered.
   #                           This is the command request that will match
   #                           against the hash keywords to lookup the information
   #                           associated with the dispatch information.
   #    $procedure           - Reference to a sub to call to process the request.
   #                           All subs get called as follows:
   #                             Procedure($cmd, $tail, $replyfd, $key)
   #                             $cmd    - the actual keyword that invoked us.
   #                             $tail   - the tail of the request that invoked us.
   #                             $replyfd- File descriptor connected to the client
   #    $must_encode          - True if the request must be encoded to be good.
   #    $client_ok            - True if it's ok for a client to request this.
   #    $manager_ok           - True if it's ok for a manager to request this.
   # Side effects:
   #      - On success, the Dispatcher hash has an entry added for the key $RequestName
   #      - On failure, the program will die as it's a bad internal bug to try to 
   #        register a duplicate command handler.
   #
   sub register_handler {
       my ($request_name,$procedure,$must_encode, $client_ok,$manager_ok)   = @_;
   
       #  Don't allow duplication#
      
       if (defined $Dispatcher{$request_name}) {
    die "Attempting to define a duplicate request handler for $request_name\n";
       }
       #   Build the client type mask:
       
       my $client_type_mask = 0;
       if($client_ok) {
    $client_type_mask  |= $CLIENT_OK;
       }
       if($manager_ok) {
    $client_type_mask  |= $MANAGER_OK;
       }
      
       #  Enter the hash:
         
       my @entry = ($procedure, $must_encode, $client_type_mask);
      
       $Dispatcher{$request_name} = \@entry;
      
      
   }
   
   
   #------------------------------------------------------------------
   
   
   
   
 #  #
 #  Convert an error return code from lcpasswd to a string value.  #  Convert an error return code from lcpasswd to a string value.
 #  #
Line 1144  sub checkchildren { Line 3260  sub checkchildren {
     &logthis('Going to check on the children');      &logthis('Going to check on the children');
     my $docdir=$perlvar{'lonDocRoot'};      my $docdir=$perlvar{'lonDocRoot'};
     foreach (sort keys %children) {      foreach (sort keys %children) {
  sleep 1;   #sleep 1;
         unless (kill 'USR1' => $_) {          unless (kill 'USR1' => $_) {
     &logthis ('Child '.$_.' is dead');      &logthis ('Child '.$_.' is dead');
             &logstatus($$.' is dead');              &logstatus($$.' is dead');
       delete($children{$_});
         }           } 
     }      }
     sleep 5;      sleep 5;
     $SIG{ALRM} = sub { die "timeout" };      $SIG{ALRM} = sub { Debug("timeout"); 
          die "timeout";  };
     $SIG{__DIE__} = 'DEFAULT';      $SIG{__DIE__} = 'DEFAULT';
     &status("Checking on the children (waiting for reports)");      &status("Checking on the children (waiting for reports)");
     foreach (sort keys %children) {      foreach (sort keys %children) {
Line 1165  sub checkchildren { Line 3283  sub checkchildren {
     #my $result=`echo 'Killed lond process $_.' | mailto $emailto -s '$subj' > /dev/null`;      #my $result=`echo 'Killed lond process $_.' | mailto $emailto -s '$subj' > /dev/null`;
     #$execdir=$perlvar{'lonDaemons'};      #$execdir=$perlvar{'lonDaemons'};
     #$result=`/bin/cp $execdir/logs/lond.log $execdir/logs/lond.log.$_`;      #$result=`/bin/cp $execdir/logs/lond.log $execdir/logs/lond.log.$_`;
       delete($children{$_});
     alarm(0);      alarm(0);
   }    }
         }          }
Line 1172  sub checkchildren { Line 3291  sub checkchildren {
     $SIG{ALRM} = 'DEFAULT';      $SIG{ALRM} = 'DEFAULT';
     $SIG{__DIE__} = \&catchexception;      $SIG{__DIE__} = \&catchexception;
     &status("Finished checking children");      &status("Finished checking children");
       &logthis('Finished Checking children');
 }  }
   
 # --------------------------------------------------------------------- Logging  # --------------------------------------------------------------------- Logging
Line 1203  sub Debug { Line 3323  sub Debug {
 #     request - Original request from client.  #     request - Original request from client.
 #  #
 sub Reply {  sub Reply {
   
     my ($fd, $reply, $request) = @_;      my ($fd, $reply, $request) = @_;
   
     print $fd $reply;      print $fd $reply;
     Debug("Request was $request  Reply was $reply");      Debug("Request was $request  Reply was $reply");
   
       $Transactions++;
   
   
   }
   
   
   #
   #    Sub to report a failure.
   #    This function:
   #     -   Increments the failure statistic counters.
   #     -   Invokes Reply to send the error message to the client.
   # Parameters:
   #    fd       - File descriptor open on the client
   #    reply    - Reply text to emit.
   #    request  - The original request message (used by Reply
   #               to debug if that's enabled.
   # Implicit outputs:
   #    $Failures- The number of failures is incremented.
   #    Reply (invoked here) sends a message to the 
   #    client:
   #
   sub Failure {
       my $fd      = shift;
       my $reply   = shift;
       my $request = shift;
      
       $Failures++;
       Reply($fd, $reply, $request);      # That's simple eh?
 }  }
 # ------------------------------------------------------------------ Log status  # ------------------------------------------------------------------ Log status
   
Line 1216  sub logstatus { Line 3362  sub logstatus {
     &status("Doing logging");      &status("Doing logging");
     my $docdir=$perlvar{'lonDocRoot'};      my $docdir=$perlvar{'lonDocRoot'};
     {      {
     my $fh=IO::File->new(">>$docdir/lon-status/londstatus.txt");  
     print $fh $$."\t".$clientname."\t".$currenthostid."\t"  
  .$status."\t".$lastlog."\n";  
     $fh->close();  
     }  
     &status("Finished londstatus.txt");  
     {  
  my $fh=IO::File->new(">$docdir/lon-status/londchld/$$.txt");   my $fh=IO::File->new(">$docdir/lon-status/londchld/$$.txt");
         print $fh $status."\n".$lastlog."\n".time;          print $fh $status."\n".$lastlog."\n".time."\n$keymode";
         $fh->close();          $fh->close();
     }      }
       &status("Finished $$.txt");
       {
    open(LOG,">>$docdir/lon-status/londstatus.txt");
    flock(LOG,LOCK_EX);
    print LOG $$."\t".$clientname."\t".$currenthostid."\t"
       .$status."\t".$lastlog."\t $keymode\n";
    flock(DB,LOCK_UN);
    close(LOG);
       }
     &status("Finished logging");      &status("Finished logging");
 }  }
   
Line 1424  while (1) { Line 3572  while (1) {
   
 sub make_new_child {  sub make_new_child {
     my $pid;      my $pid;
     my $cipher;  #    my $cipher;     # Now global
     my $sigset;      my $sigset;
   
     $client = shift;      $client = shift;
Line 1483  sub make_new_child { Line 3631  sub make_new_child {
         sigprocmask(SIG_UNBLOCK, $sigset)          sigprocmask(SIG_UNBLOCK, $sigset)
             or die "Can't unblock SIGINT for fork: $!\n";              or die "Can't unblock SIGINT for fork: $!\n";
   
         my $tmpsnum=0;  #        my $tmpsnum=0;            # Now global
 #---------------------------------------------------- kerberos 5 initialization  #---------------------------------------------------- kerberos 5 initialization
         &Authen::Krb5::init_context();          &Authen::Krb5::init_context();
         &Authen::Krb5::init_ets();          &Authen::Krb5::init_ets();
Line 1541  sub make_new_child { Line 3689  sub make_new_child {
  $inittype = ""; # This forces insecure attempt.   $inittype = ""; # This forces insecure attempt.
  &logthis("<font color=\"blue\"> Certificates not "   &logthis("<font color=\"blue\"> Certificates not "
  ."installed -- trying insecure auth</font>");   ."installed -- trying insecure auth</font>");
     }      } else { # SSL certificates are in place so
     else { # SSL certificates are in place so  
     } # Leave the inittype alone.      } # Leave the inittype alone.
  }   }
   
Line 1556  sub make_new_child { Line 3703  sub make_new_child {
  print $client "ok:local\n";   print $client "ok:local\n";
  &logthis('<font color="green"'   &logthis('<font color="green"'
  . "Successful local authentication </font>");   . "Successful local authentication </font>");
    $keymode = "local"
     } else {      } else {
  Debug("Failed to get local key");   Debug("Failed to get local key");
  $clientok = 0;   $clientok = 0;
Line 1570  sub make_new_child { Line 3718  sub make_new_child {
  $cipher       = new IDEA($cipherkey);   $cipher       = new IDEA($cipherkey);
  &logthis('<font color="green">'   &logthis('<font color="green">'
  ."Successfull ssl authentication with $clientname </font>");   ."Successfull ssl authentication with $clientname </font>");
    $keymode = "ssl";
             
     } else {      } else {
  $clientok = 0;   $clientok = 0;
Line 1583  sub make_new_child { Line 3732  sub make_new_child {
  &logthis('<font color="green">'   &logthis('<font color="green">'
  ."Successful insecure authentication with $clientname </font>");   ."Successful insecure authentication with $clientname </font>");
  print $client "ok\n";   print $client "ok\n";
    $keymode = "insecure";
     } else {      } else {
  &logthis('<font color="yellow">'   &logthis('<font color="yellow">'
   ."Attempted insecure connection disallowed </font>");    ."Attempted insecure connection disallowed </font>");
Line 1618  sub make_new_child { Line 3768  sub make_new_child {
     &logthis("<font color='green'>Established connection: $clientname</font>");      &logthis("<font color='green'>Established connection: $clientname</font>");
     &status('Will listen to '.$clientname);      &status('Will listen to '.$clientname);
 # ------------------------------------------------------------ Process requests  # ------------------------------------------------------------ Process requests
     while (my $userinput=<$client>) {      my $keep_going = 1;
                 chomp($userinput);      my $user_input;
  Debug("Request = $userinput\n");      while(($user_input = get_request) && $keep_going) {
                 &status('Processing '.$clientname.': '.$userinput);   alarm(120);
                 my $wasenc=0;   Debug("Main: Got $user_input\n");
                 alarm(120);   $keep_going = &process_request($user_input);
 # ------------------------------------------------------------ See if encrypted  
  if ($userinput =~ /^enc/) {  
     if ($cipher) {  
  my ($cmd,$cmdlength,$encinput)=split(/:/,$userinput);  
  $userinput='';  
  for (my $encidx=0;$encidx<length($encinput);$encidx+=16) {  
     $userinput.=  
  $cipher->decrypt(  
  pack("H16",substr($encinput,$encidx,16))  
  );  
  }  
  $userinput=substr($userinput,0,$cmdlength);  
  $wasenc=1;  
     }  
  }  
   
 # ------------------------------------------------------------- Normal commands  
 # ------------------------------------------------------------------------ ping  
  if ($userinput =~ /^ping/) { # client only  
     if(isClient) {  
  print $client "$currenthostid\n";  
     } else {  
  Reply($client, "refused\n", $userinput);  
     }  
 # ------------------------------------------------------------------------ pong  
  }elsif ($userinput =~ /^pong/) { # client only  
     if(isClient) {  
  my $reply=&reply("ping",$clientname);  
  print $client "$currenthostid:$reply\n";   
     } else {  
  Reply($client, "refused\n", $userinput);  
     }  
 # ------------------------------------------------------------------------ ekey  
  } elsif ($userinput =~ /^ekey/) { # ok for both clients & mgrs  
     my $buildkey=time.$$.int(rand 100000);  
     $buildkey=~tr/1-6/A-F/;  
     $buildkey=int(rand 100000).$buildkey.int(rand 100000);  
     my $key=$currenthostid.$clientname;  
     $key=~tr/a-z/A-Z/;  
     $key=~tr/G-P/0-9/;  
     $key=~tr/Q-Z/0-9/;  
     $key=$key.$buildkey.$key.$buildkey.$key.$buildkey;  
     $key=substr($key,0,32);  
     my $cipherkey=pack("H32",$key);  
     $cipher=new IDEA $cipherkey;  
     print $client "$buildkey\n";   
 # ------------------------------------------------------------------------ load  
  } elsif ($userinput =~ /^load/) { # client only  
     if (isClient) {  
  my $loadavg;  
  {  
     my $loadfile=IO::File->new('/proc/loadavg');  
     $loadavg=<$loadfile>;  
  }  
  $loadavg =~ s/\s.*//g;  
  my $loadpercent=100*$loadavg/$perlvar{'lonLoadLim'};  
  print $client "$loadpercent\n";  
     } else {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # -------------------------------------------------------------------- userload  
  } elsif ($userinput =~ /^userload/) { # client only  
     if(isClient) {  
  my $userloadpercent=&userload();  
  print $client "$userloadpercent\n";  
     } else {  
  Reply($client, "refused\n", $userinput);  
        
     }  
 #  
 #        Transactions requiring encryption:  
 #  
 # ----------------------------------------------------------------- currentauth  
  } elsif ($userinput =~ /^currentauth/) {  
     if (($wasenc==1)  && isClient) { # Encoded & client only.  
  my ($cmd,$udom,$uname)=split(/:/,$userinput);  
  my $result = GetAuthType($udom, $uname);  
  if($result eq "nouser") {  
     print $client "unknown_user\n";  
  }  
  else {  
     print $client "$result\n"  
     }  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 #--------------------------------------------------------------------- pushfile  
  } elsif($userinput =~ /^pushfile/) { # encoded & manager.  
     if(($wasenc == 1) && isManager) {  
  my $cert = GetCertificate($userinput);  
  if(ValidManager($cert)) {  
     my $reply = PushFile($userinput);  
     print $client "$reply\n";  
  } else {  
     print $client "refused\n";  
  }   
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 #--------------------------------------------------------------------- reinit  
  } elsif($userinput =~ /^reinit/) { # Encoded and manager  
  if (($wasenc == 1) && isManager) {  
  my $cert = GetCertificate($userinput);  
  if(ValidManager($cert)) {  
  chomp($userinput);  
  my $reply = ReinitProcess($userinput);  
  print $client  "$reply\n";  
  } else {  
  print $client "refused\n";  
  }  
  } else {  
  Reply($client, "refused\n", $userinput);  
  }  
 #------------------------------------------------------------------------- edit  
     } elsif ($userinput =~ /^edit/) {    # encoded and manager:  
  if(($wasenc ==1) && (isManager)) {  
     my $cert = GetCertificate($userinput);  
     if(ValidManager($cert)) {  
                my($command, $filetype, $script) = split(/:/, $userinput);  
                if (($filetype eq "hosts") || ($filetype eq "domain")) {  
                   if($script ne "") {  
       Reply($client, EditFile($userinput));  
                   } else {  
                      Reply($client,"refused\n",$userinput);  
                   }  
                } else {  
                   Reply($client,"refused\n",$userinput);  
                }  
             } else {  
                Reply($client,"refused\n",$userinput);  
             }  
          } else {  
      Reply($client,"refused\n",$userinput);  
  }  
 # ------------------------------------------------------------------------ auth  
     } elsif ($userinput =~ /^auth/) { # Encoded and client only.  
     if (($wasenc==1) && isClient) {  
  my ($cmd,$udom,$uname,$upass)=split(/:/,$userinput);  
  chomp($upass);  
  $upass=unescape($upass);  
  my $proname=propath($udom,$uname);  
  my $passfilename="$proname/passwd";  
  if (-e $passfilename) {  
     my $pf = IO::File->new($passfilename);  
     my $realpasswd=<$pf>;  
     chomp($realpasswd);  
     my ($howpwd,$contentpwd)=split(/:/,$realpasswd);  
     my $pwdcorrect=0;  
     if ($howpwd eq 'internal') {  
  &Debug("Internal auth");  
  $pwdcorrect=  
     (crypt($upass,$contentpwd) eq $contentpwd);  
     } elsif ($howpwd eq 'unix') {  
  &Debug("Unix auth");  
  if((getpwnam($uname))[1] eq "") { #no such user!  
     $pwdcorrect = 0;  
  } else {  
     $contentpwd=(getpwnam($uname))[1];  
     my $pwauth_path="/usr/local/sbin/pwauth";  
     unless ($contentpwd eq 'x') {  
  $pwdcorrect=  
     (crypt($upass,$contentpwd) eq   
      $contentpwd);  
     }  
       
     elsif (-e $pwauth_path) {  
  open PWAUTH, "|$pwauth_path" or  
     die "Cannot invoke authentication";  
  print PWAUTH "$uname\n$upass\n";  
  close PWAUTH;  
  $pwdcorrect=!$?;  
     }  
  }  
     } elsif ($howpwd eq 'krb4') {  
  my $null=pack("C",0);  
  unless ($upass=~/$null/) {  
     my $krb4_error = &Authen::Krb4::get_pw_in_tkt  
  ($uname,"",$contentpwd,'krbtgt',  
  $contentpwd,1,$upass);  
     if (!$krb4_error) {  
  $pwdcorrect = 1;  
     } else {   
  $pwdcorrect=0;   
  # log error if it is not a bad password  
  if ($krb4_error != 62) {  
     &logthis('krb4:'.$uname.','.  
      &Authen::Krb4::get_err_txt($Authen::Krb4::error));  
  }  
     }  
  }  
     } elsif ($howpwd eq 'krb5') {  
  my $null=pack("C",0);  
  unless ($upass=~/$null/) {  
     my $krbclient=&Authen::Krb5::parse_name($uname.'@'.$contentpwd);  
     my $krbservice="krbtgt/".$contentpwd."\@".$contentpwd;  
     my $krbserver=&Authen::Krb5::parse_name($krbservice);  
     my $credentials=&Authen::Krb5::cc_default();  
     $credentials->initialize($krbclient);  
     my $krbreturn =   
  &Authen::Krb5::get_in_tkt_with_password(  
  $krbclient,$krbserver,$upass,$credentials);  
 #  unless ($krbreturn) {  
 #      &logthis("Krb5 Error: ".  
 #       &Authen::Krb5::error());  
 #  }  
     $pwdcorrect = ($krbreturn == 1);  
  } else { $pwdcorrect=0; }  
     } elsif ($howpwd eq 'localauth') {  
  $pwdcorrect=&localauth::localauth($uname,$upass,  
   $contentpwd);  
     }  
     if ($pwdcorrect) {  
  print $client "authorized\n";  
     } else {  
  print $client "non_authorized\n";  
     }    
  } else {  
     print $client "unknown_user\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # ---------------------------------------------------------------------- passwd  
  } elsif ($userinput =~ /^passwd/) { # encoded and client  
     if (($wasenc==1) && isClient) {  
  my   
     ($cmd,$udom,$uname,$upass,$npass)=split(/:/,$userinput);  
  chomp($npass);  
  $upass=&unescape($upass);  
  $npass=&unescape($npass);  
  &Debug("Trying to change password for $uname");  
  my $proname=propath($udom,$uname);  
  my $passfilename="$proname/passwd";  
  if (-e $passfilename) {  
     my $realpasswd;  
     { my $pf = IO::File->new($passfilename);  
       $realpasswd=<$pf>; }  
     chomp($realpasswd);  
     my ($howpwd,$contentpwd)=split(/:/,$realpasswd);  
     if ($howpwd eq 'internal') {  
  &Debug("internal auth");  
  if (crypt($upass,$contentpwd) eq $contentpwd) {  
     my $salt=time;  
     $salt=substr($salt,6,2);  
     my $ncpass=crypt($npass,$salt);  
     {  
  my $pf;  
  if ($pf = IO::File->new(">$passfilename")) {  
     print $pf "internal:$ncpass\n";  
     &logthis("Result of password change for $uname: pwchange_success");  
     print $client "ok\n";  
  } else {  
     &logthis("Unable to open $uname passwd to change password");  
     print $client "non_authorized\n";  
  }  
     }               
       
  } else {  
     print $client "non_authorized\n";  
  }  
     } elsif ($howpwd eq 'unix') {  
  # Unix means we have to access /etc/password  
  # one way or another.  
  # First: Make sure the current password is  
  #        correct  
  &Debug("auth is unix");  
  $contentpwd=(getpwnam($uname))[1];  
  my $pwdcorrect = "0";  
  my $pwauth_path="/usr/local/sbin/pwauth";  
  unless ($contentpwd eq 'x') {  
     $pwdcorrect=  
  (crypt($upass,$contentpwd) eq $contentpwd);  
  } elsif (-e $pwauth_path) {  
     open PWAUTH, "|$pwauth_path" or  
  die "Cannot invoke authentication";  
     print PWAUTH "$uname\n$upass\n";  
     close PWAUTH;  
     &Debug("exited pwauth with $? ($uname,$upass) ");  
     $pwdcorrect=($? == 0);  
  }  
  if ($pwdcorrect) {  
     my $execdir=$perlvar{'lonDaemons'};  
     &Debug("Opening lcpasswd pipeline");  
     my $pf = IO::File->new("|$execdir/lcpasswd > $perlvar{'lonDaemons'}/logs/lcpasswd.log");  
     print $pf "$uname\n$npass\n$npass\n";  
     close $pf;  
     my $err = $?;  
     my $result = ($err>0 ? 'pwchange_failure'   
   : 'ok');  
     &logthis("Result of password change for $uname: ".  
      &lcpasswdstrerror($?));  
     print $client "$result\n";  
  } else {  
     print $client "non_authorized\n";  
  }  
     } else {  
  print $client "auth_mode_error\n";  
     }    
  } else {  
     print $client "unknown_user\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # -------------------------------------------------------------------- makeuser  
  } elsif ($userinput =~ /^makeuser/) { # encoded and client.  
     &Debug("Make user received");  
     my $oldumask=umask(0077);  
     if (($wasenc==1) && isClient) {  
  my   
     ($cmd,$udom,$uname,$umode,$npass)=split(/:/,$userinput);  
  &Debug("cmd =".$cmd." $udom =".$udom.  
        " uname=".$uname);  
  chomp($npass);  
  $npass=&unescape($npass);  
  my $proname=propath($udom,$uname);  
  my $passfilename="$proname/passwd";  
  &Debug("Password file created will be:".  
        $passfilename);  
  if (-e $passfilename) {  
     print $client "already_exists\n";  
  } elsif ($udom ne $currentdomainid) {  
     print $client "not_right_domain\n";  
  } else {  
     my @fpparts=split(/\//,$proname);  
     my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2];  
     my $fperror='';  
     for (my $i=3;$i<=$#fpparts;$i++) {  
  $fpnow.='/'.$fpparts[$i];   
  unless (-e $fpnow) {  
     unless (mkdir($fpnow,0777)) {  
  $fperror="error: ".($!+0)  
     ." mkdir failed while attempting "  
     ."makeuser";  
     }  
  }  
     }  
     unless ($fperror) {  
  my $result=&make_passwd_file($uname, $umode,$npass,  
      $passfilename);  
  print $client $result;  
     } else {  
  print $client "$fperror\n";  
     }  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
         
     }  
     umask($oldumask);  
 # -------------------------------------------------------------- changeuserauth  
  } elsif ($userinput =~ /^changeuserauth/) { # encoded & client  
     &Debug("Changing authorization");  
     if (($wasenc==1) && isClient) {  
  my   
     ($cmd,$udom,$uname,$umode,$npass)=split(/:/,$userinput);  
  chomp($npass);  
  &Debug("cmd = ".$cmd." domain= ".$udom.  
        "uname =".$uname." umode= ".$umode);  
  $npass=&unescape($npass);  
  my $proname=&propath($udom,$uname);  
  my $passfilename="$proname/passwd";  
  if ($udom ne $currentdomainid) {  
     print $client "not_right_domain\n";  
  } else {  
     my $result=&make_passwd_file($uname, $umode,$npass,  
  $passfilename);  
     print $client $result;  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
      
     }  
 # ------------------------------------------------------------------------ home  
  } elsif ($userinput =~ /^home/) { # client clear or encoded  
     if(isClient) {  
  my ($cmd,$udom,$uname)=split(/:/,$userinput);  
  chomp($uname);  
  my $proname=propath($udom,$uname);  
  if (-e $proname) {  
     print $client "found\n";  
  } else {  
     print $client "not_found\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # ---------------------------------------------------------------------- update  
  } elsif ($userinput =~ /^update/) { # client clear or encoded.  
     if(isClient) {  
  my ($cmd,$fname)=split(/:/,$userinput);  
  my $ownership=ishome($fname);  
  if ($ownership eq 'not_owner') {  
     if (-e $fname) {  
  my ($dev,$ino,$mode,$nlink,  
     $uid,$gid,$rdev,$size,  
     $atime,$mtime,$ctime,  
     $blksize,$blocks)=stat($fname);  
  my $now=time;  
  my $since=$now-$atime;  
  if ($since>$perlvar{'lonExpire'}) {  
     my $reply=  
  &reply("unsub:$fname","$clientname");  
     unlink("$fname");  
  } else {  
     my $transname="$fname.in.transfer";  
     my $remoteurl=  
  &reply("sub:$fname","$clientname");  
     my $response;  
     {  
  my $ua=new LWP::UserAgent;  
  my $request=new HTTP::Request('GET',"$remoteurl");  
  $response=$ua->request($request,$transname);  
     }  
     if ($response->is_error()) {  
  unlink($transname);  
  my $message=$response->status_line;  
  &logthis(  
  "LWP GET: $message for $fname ($remoteurl)");  
     } else {  
  if ($remoteurl!~/\.meta$/) {  
     my $ua=new LWP::UserAgent;  
     my $mrequest=  
  new HTTP::Request('GET',$remoteurl.'.meta');  
     my $mresponse=  
  $ua->request($mrequest,$fname.'.meta');  
     if ($mresponse->is_error()) {  
  unlink($fname.'.meta');  
     }  
  }  
  rename($transname,$fname);  
     }  
  }  
  print $client "ok\n";  
     } else {  
  print $client "not_found\n";  
     }  
  } else {  
     print $client "rejected\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # -------------------------------------- fetch a user file from a remote server  
  } elsif ($userinput =~ /^fetchuserfile/) { # Client clear or enc.  
     if(isClient) {  
  my ($cmd,$fname)=split(/:/,$userinput);  
  my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|);  
  my $udir=propath($udom,$uname).'/userfiles';  
  unless (-e $udir) { mkdir($udir,0770); }  
  if (-e $udir) {  
                             $ufile=~s/^[\.\~]+//;  
                             my $path = $udir;  
                             if ($ufile =~m|(.+)/([^/]+)$|) {  
                                 my @parts=split('/',$1);  
                                 foreach my $part (@parts) {  
                                     $path .= '/'.$part;  
                                     if ((-e $path)!=1) {  
                                         mkdir($path,0770);  
                                     }  
                                 }  
                             }  
     my $destname=$udir.'/'.$ufile;  
     my $transname=$udir.'/'.$ufile.'.in.transit';  
     my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;  
     my $response;  
     {  
  my $ua=new LWP::UserAgent;  
  my $request=new HTTP::Request('GET',"$remoteurl");  
  $response=$ua->request($request,$transname);  
     }  
     if ($response->is_error()) {  
  unlink($transname);  
  my $message=$response->status_line;  
  &logthis("LWP GET: $message for $fname ($remoteurl)");  
  print $client "failed\n";  
     } else {  
  if (!rename($transname,$destname)) {  
     &logthis("Unable to move $transname to $destname");  
     unlink($transname);  
     print $client "failed\n";  
  } else {  
     print $client "ok\n";  
  }  
     }  
  } else {  
     print $client "not_home\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
     }  
 # --------------------------------------------------------- remove a user file   
  } elsif ($userinput =~ /^removeuserfile/) { # Client clear or enc.  
     if(isClient) {  
  my ($cmd,$fname)=split(/:/,$userinput);  
  my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|);  
  &logthis("$udom - $uname - $ufile");  
  if ($ufile =~m|/\.\./|) {  
     # any files paths with /../ in them refuse   
                             # to deal with  
     print $client "refused\n";  
  } else {  
     my $udir=propath($udom,$uname);  
     if (-e $udir) {  
  my $file=$udir.'/userfiles/'.$ufile;  
  if (-e $file) {  
     unlink($file);  
     if (-e $file) {  
  print $client "failed\n";  
     } else {  
  print $client "ok\n";  
     }  
  } else {  
     print $client "not_found\n";  
  }  
     } else {  
  print $client "not_home\n";  
     }  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
     }  
 # ------------------------------------------ authenticate access to a user file  
  } elsif ($userinput =~ /^tokenauthuserfile/) { # Client only  
     if(isClient) {  
  my ($cmd,$fname,$session)=split(/:/,$userinput);  
  chomp($session);  
  my $reply='non_auth';  
  if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'.  
  $session.'.id')) {  
     while (my $line=<ENVIN>) {  
  if ($line=~ m|userfile\.\Q$fname\E\=|) { $reply='ok'; }  
     }  
     close(ENVIN);  
     print $client $reply."\n";  
  } else {  
     print $client "invalid_token\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # ----------------------------------------------------------------- unsubscribe  
  } elsif ($userinput =~ /^unsub/) {  
     if(isClient) {  
  my ($cmd,$fname)=split(/:/,$userinput);  
  if (-e $fname) {  
     print $client &unsub($fname,$clientip);  
  } else {  
     print $client "not_found\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # ------------------------------------------------------------------- subscribe  
  } elsif ($userinput =~ /^sub/) {  
     if(isClient) {  
  print $client &subscribe($userinput,$clientip);  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # ------------------------------------------------------------- current version  
  } elsif ($userinput =~ /^currentversion/) {  
     if(isClient) {  
  my ($cmd,$fname)=split(/:/,$userinput);  
  print $client &currentversion($fname)."\n";  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # ------------------------------------------------------------------------- log  
  } elsif ($userinput =~ /^log/) {  
     if(isClient) {  
  my ($cmd,$udom,$uname,$what)=split(/:/,$userinput);  
  chomp($what);  
  my $proname=propath($udom,$uname);  
  my $now=time;  
  {  
     my $hfh;  
     if ($hfh=IO::File->new(">>$proname/activity.log")) {   
  print $hfh "$now:$clientname:$what\n";  
  print $client "ok\n";   
     } else {  
  print $client "error: ".($!+0)  
     ." IO::File->new Failed "  
     ."while attempting log\n";  
     }  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # ------------------------------------------------------------------------- put  
  } elsif ($userinput =~ /^put/) {  
     if(isClient) {  
  my ($cmd,$udom,$uname,$namespace,$what)  
     =split(/:/,$userinput);  
  $namespace=~s/\//\_/g;  
  $namespace=~s/\W//g;  
  if ($namespace ne 'roles') {  
     chomp($what);  
     my $proname=propath($udom,$uname);  
     my $now=time;  
     unless ($namespace=~/^nohist\_/) {  
  my $hfh;  
  if (  
     $hfh=IO::File->new(">>$proname/$namespace.hist")  
     ) { print $hfh "P:$now:$what\n"; }  
     }  
     my @pairs=split(/\&/,$what);  
     my %hash;  
     if (tie(%hash,'GDBM_File',  
     "$proname/$namespace.db",  
     &GDBM_WRCREAT(),0640)) {  
  foreach my $pair (@pairs) {  
     my ($key,$value)=split(/=/,$pair);  
     $hash{$key}=$value;  
  }  
  if (untie(%hash)) {  
     print $client "ok\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) failed ".  
  "while attempting put\n";  
  }  
     } else {  
  print $client "error: ".($!)  
     ." tie(GDBM) Failed ".  
     "while attempting put\n";  
     }  
  } else {  
     print $client "refused\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # ------------------------------------------------------------------- inc  
  } elsif ($userinput =~ /^inc:/) {  
     if(isClient) {  
  my ($cmd,$udom,$uname,$namespace,$what)  
     =split(/:/,$userinput);  
  $namespace=~s/\//\_/g;  
  $namespace=~s/\W//g;  
  if ($namespace ne 'roles') {  
     chomp($what);  
     my $proname=propath($udom,$uname);  
     my $now=time;  
     unless ($namespace=~/^nohist\_/) {  
  my $hfh;  
  if (  
     $hfh=IO::File->new(">>$proname/$namespace.hist")  
     ) { print $hfh "P:$now:$what\n"; }  
     }  
     my @pairs=split(/\&/,$what);  
     my %hash;  
     if (tie(%hash,'GDBM_File',  
     "$proname/$namespace.db",  
     &GDBM_WRCREAT(),0640)) {  
  foreach my $pair (@pairs) {  
     my ($key,$value)=split(/=/,$pair);  
                                     # We could check that we have a number...  
                                     if (! defined($value) || $value eq '') {  
                                         $value = 1;  
                                     }  
     $hash{$key}+=$value;  
  }  
  if (untie(%hash)) {  
     print $client "ok\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) failed ".  
  "while attempting inc\n";  
  }  
     } else {  
  print $client "error: ".($!)  
     ." tie(GDBM) Failed ".  
     "while attempting inc\n";  
     }  
  } else {  
     print $client "refused\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # -------------------------------------------------------------------- rolesput  
  } elsif ($userinput =~ /^rolesput/) {  
     if(isClient) {  
  &Debug("rolesput");  
  if ($wasenc==1) {  
     my ($cmd,$exedom,$exeuser,$udom,$uname,$what)  
  =split(/:/,$userinput);  
     &Debug("cmd = ".$cmd." exedom= ".$exedom.  
    "user = ".$exeuser." udom=".$udom.  
    "what = ".$what);  
     my $namespace='roles';  
     chomp($what);  
     my $proname=propath($udom,$uname);  
     my $now=time;  
     {  
  my $hfh;  
  if (  
     $hfh=IO::File->new(">>$proname/$namespace.hist")  
     ) {   
     print $hfh "P:$now:$exedom:$exeuser:$what\n";  
  }  
     }  
     my @pairs=split(/\&/,$what);  
     my %hash;  
     if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  
  foreach my $pair (@pairs) {  
     my ($key,$value)=split(/=/,$pair);  
     &ManagePermissions($key, $udom, $uname,  
        &GetAuthType( $udom,   
      $uname));  
     $hash{$key}=$value;  
  }  
  if (untie(%hash)) {  
     print $client "ok\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting rolesput\n";  
  }  
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting rolesput\n";  
     }  
  } else {  
     print $client "refused\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
     
     }  
 # -------------------------------------------------------------------- rolesdel  
  } elsif ($userinput =~ /^rolesdel/) {  
     if(isClient) {  
  &Debug("rolesdel");  
  if ($wasenc==1) {  
     my ($cmd,$exedom,$exeuser,$udom,$uname,$what)  
  =split(/:/,$userinput);  
     &Debug("cmd = ".$cmd." exedom= ".$exedom.  
    "user = ".$exeuser." udom=".$udom.  
    "what = ".$what);  
     my $namespace='roles';  
     chomp($what);  
     my $proname=propath($udom,$uname);  
     my $now=time;  
     {  
  my $hfh;  
  if (  
     $hfh=IO::File->new(">>$proname/$namespace.hist")  
     ) {   
     print $hfh "D:$now:$exedom:$exeuser:$what\n";  
  }  
     }  
     my @rolekeys=split(/\&/,$what);  
     my %hash;  
     if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  
  foreach my $key (@rolekeys) {  
     delete $hash{$key};  
  }  
  if (untie(%hash)) {  
     print $client "ok\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting rolesdel\n";  
  }  
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting rolesdel\n";  
     }  
  } else {  
     print $client "refused\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
         
     }  
 # ------------------------------------------------------------------------- get  
  } elsif ($userinput =~ /^get/) {  
     if(isClient) {  
  my ($cmd,$udom,$uname,$namespace,$what)  
     =split(/:/,$userinput);  
  $namespace=~s/\//\_/g;  
  $namespace=~s/\W//g;  
  chomp($what);  
  my @queries=split(/\&/,$what);  
  my $proname=propath($udom,$uname);  
  my $qresult='';  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
     for (my $i=0;$i<=$#queries;$i++) {  
  $qresult.="$hash{$queries[$i]}&";  
     }  
     if (untie(%hash)) {  
  $qresult=~s/\&$//;  
  print $client "$qresult\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting get\n";  
     }  
  } else {  
     if ($!+0 == 2) {  
  print $client "error:No such file or ".  
     "GDBM reported bad block error\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting get\n";  
     }  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # ------------------------------------------------------------------------ eget  
  } elsif ($userinput =~ /^eget/) {  
     if (isClient) {  
  my ($cmd,$udom,$uname,$namespace,$what)  
     =split(/:/,$userinput);  
  $namespace=~s/\//\_/g;  
  $namespace=~s/\W//g;  
  chomp($what);  
  my @queries=split(/\&/,$what);  
  my $proname=propath($udom,$uname);  
  my $qresult='';  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
     for (my $i=0;$i<=$#queries;$i++) {  
  $qresult.="$hash{$queries[$i]}&";  
     }  
     if (untie(%hash)) {  
  $qresult=~s/\&$//;  
  if ($cipher) {  
     my $cmdlength=length($qresult);  
     $qresult.="         ";  
     my $encqresult='';  
     for   
  (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) {  
     $encqresult.=  
  unpack("H16",  
        $cipher->encrypt(substr($qresult,$encidx,8)));  
  }  
     print $client "enc:$cmdlength:$encqresult\n";  
  } else {  
     print $client "error:no_key\n";  
  }  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting eget\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting eget\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
       
     }  
 # ------------------------------------------------------------------------- del  
  } elsif ($userinput =~ /^del/) {  
     if(isClient) {  
  my ($cmd,$udom,$uname,$namespace,$what)  
     =split(/:/,$userinput);  
  $namespace=~s/\//\_/g;  
  $namespace=~s/\W//g;  
  chomp($what);  
  my $proname=propath($udom,$uname);  
  my $now=time;  
  unless ($namespace=~/^nohist\_/) {  
     my $hfh;  
     if (  
  $hfh=IO::File->new(">>$proname/$namespace.hist")  
  ) { print $hfh "D:$now:$what\n"; }  
  }  
  my @keys=split(/\&/,$what);  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  
     foreach my $key (@keys) {  
  delete($hash{$key});  
     }  
     if (untie(%hash)) {  
  print $client "ok\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting del\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting del\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
   
     }  
 # ------------------------------------------------------------------------ keys  
  } elsif ($userinput =~ /^keys/) {  
     if(isClient) {  
  my ($cmd,$udom,$uname,$namespace)  
     =split(/:/,$userinput);  
  $namespace=~s/\//\_/g;  
  $namespace=~s/\W//g;  
  my $proname=propath($udom,$uname);  
  my $qresult='';  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
     foreach my $key (keys %hash) {  
  $qresult.="$key&";  
     }  
     if (untie(%hash)) {  
  $qresult=~s/\&$//;  
  print $client "$qresult\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting keys\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting keys\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
      
     }  
 # ----------------------------------------------------------------- dumpcurrent  
  } elsif ($userinput =~ /^currentdump/) {  
     if (isClient) {  
  my ($cmd,$udom,$uname,$namespace)  
     =split(/:/,$userinput);  
  $namespace=~s/\//\_/g;  
  $namespace=~s/\W//g;  
  my $qresult='';  
  my $proname=propath($udom,$uname);  
  my %hash;  
  if (tie(%hash,'GDBM_File',  
  "$proname/$namespace.db",  
  &GDBM_READER(),0640)) {  
     # Structure of %data:  
     # $data{$symb}->{$parameter}=$value;  
     # $data{$symb}->{'v.'.$parameter}=$version;  
     # since $parameter will be unescaped, we do not  
     # have to worry about silly parameter names...  
     my %data = ();  
     while (my ($key,$value) = each(%hash)) {  
  my ($v,$symb,$param) = split(/:/,$key);  
  next if ($v eq 'version' || $symb eq 'keys');  
  next if (exists($data{$symb}) &&   
  exists($data{$symb}->{$param}) &&  
  $data{$symb}->{'v.'.$param} > $v);  
  $data{$symb}->{$param}=$value;  
  $data{$symb}->{'v.'.$param}=$v;  
     }  
     if (untie(%hash)) {  
  while (my ($symb,$param_hash) = each(%data)) {  
     while(my ($param,$value) = each (%$param_hash)){  
  next if ($param =~ /^v\./);  
  $qresult.=$symb.':'.$param.'='.$value.'&';  
     }  
  }  
  chop($qresult);  
  print $client "$qresult\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting currentdump\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting currentdump\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
     }  
 # ------------------------------------------------------------------------ dump  
  } elsif ($userinput =~ /^dump/) {  
     if(isClient) {  
  my ($cmd,$udom,$uname,$namespace,$regexp)  
     =split(/:/,$userinput);  
  $namespace=~s/\//\_/g;  
  $namespace=~s/\W//g;  
  if (defined($regexp)) {  
     $regexp=&unescape($regexp);  
  } else {  
     $regexp='.';  
  }  
  my $qresult='';  
  my $proname=propath($udom,$uname);  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
        while (my ($key,$value) = each(%hash)) {  
    if ($regexp eq '.') {  
        $qresult.=$key.'='.$value.'&';  
    } else {  
        my $unescapeKey = &unescape($key);  
        if (eval('$unescapeKey=~/$regexp/')) {  
    $qresult.="$key=$value&";  
        }  
    }  
        }  
        if (untie(%hash)) {  
    chop($qresult);  
    print $client "$qresult\n";  
        } else {  
    print $client "error: ".($!+0)  
        ." untie(GDBM) Failed ".  
                                        "while attempting dump\n";  
        }  
    } else {  
        print $client "error: ".($!+0)  
    ." tie(GDBM) Failed ".  
    "while attempting dump\n";  
    }  
     } else {  
  Reply($client, "refused\n", $userinput);  
     
     }  
 # ----------------------------------------------------------------------- store  
  } elsif ($userinput =~ /^store/) {  
     if(isClient) {  
  my ($cmd,$udom,$uname,$namespace,$rid,$what)  
     =split(/:/,$userinput);  
  $namespace=~s/\//\_/g;  
  $namespace=~s/\W//g;  
  if ($namespace ne 'roles') {  
     chomp($what);  
     my $proname=propath($udom,$uname);  
     my $now=time;  
     unless ($namespace=~/^nohist\_/) {  
  my $hfh;  
  if (  
     $hfh=IO::File->new(">>$proname/$namespace.hist")  
     ) { print $hfh "P:$now:$rid:$what\n"; }  
     }  
     my @pairs=split(/\&/,$what);  
     my %hash;  
     if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) {  
  my @previouskeys=split(/&/,$hash{"keys:$rid"});  
  my $key;  
  $hash{"version:$rid"}++;  
  my $version=$hash{"version:$rid"};  
  my $allkeys='';   
  foreach my $pair (@pairs) {  
     my ($key,$value)=split(/=/,$pair);  
     $allkeys.=$key.':';  
     $hash{"$version:$rid:$key"}=$value;  
  }  
  $hash{"$version:$rid:timestamp"}=$now;  
  $allkeys.='timestamp';  
  $hash{"$version:keys:$rid"}=$allkeys;  
  if (untie(%hash)) {  
     print $client "ok\n";  
  } else {  
     print $client "error: ".($!+0)  
  ." untie(GDBM) Failed ".  
  "while attempting store\n";  
  }  
     } else {  
  print $client "error: ".($!+0)  
     ." tie(GDBM) Failed ".  
     "while attempting store\n";  
     }  
  } else {  
     print $client "refused\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
        
     }  
 # --------------------------------------------------------------------- restore  
  } elsif ($userinput =~ /^restore/) {  
     if(isClient) {  
  my ($cmd,$udom,$uname,$namespace,$rid)  
     =split(/:/,$userinput);  
  $namespace=~s/\//\_/g;  
  $namespace=~s/\W//g;  
  chomp($rid);  
  my $proname=propath($udom,$uname);  
  my $qresult='';  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {  
     my $version=$hash{"version:$rid"};  
     $qresult.="version=$version&";  
     my $scope;  
     for ($scope=1;$scope<=$version;$scope++) {  
  my $vkeys=$hash{"$scope:keys:$rid"};  
  my @keys=split(/:/,$vkeys);  
  my $key;  
  $qresult.="$scope:keys=$vkeys&";  
  foreach $key (@keys) {  
     $qresult.="$scope:$key=".$hash{"$scope:$rid:$key"}."&";  
  }                                    
     }  
     if (untie(%hash)) {  
  $qresult=~s/\&$//;  
  print $client "$qresult\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting restore\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting restore\n";  
  }  
     } else  {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # -------------------------------------------------------------------- chatsend  
  } elsif ($userinput =~ /^chatsend/) {  
     if(isClient) {  
  my ($cmd,$cdom,$cnum,$newpost)=split(/\:/,$userinput);  
  &chatadd($cdom,$cnum,$newpost);  
  print $client "ok\n";  
     } else {  
  Reply($client, "refused\n", $userinput);  
         
     }  
 # -------------------------------------------------------------------- chatretr  
  } elsif ($userinput =~ /^chatretr/) {  
     if(isClient) {  
  my   
     ($cmd,$cdom,$cnum,$udom,$uname)=split(/\:/,$userinput);  
  my $reply='';  
  foreach (&getchat($cdom,$cnum,$udom,$uname)) {  
     $reply.=&escape($_).':';  
  }  
  $reply=~s/\:$//;  
  print $client $reply."\n";  
     } else {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # ------------------------------------------------------------------- querysend  
  } elsif ($userinput =~ /^querysend/) {  
     if (isClient) {  
  my ($cmd,$query,  
     $arg1,$arg2,$arg3)=split(/\:/,$userinput);  
  $query=~s/\n*$//g;  
  print $client "".  
     sqlreply("$clientname\&$query".  
      "\&$arg1"."\&$arg2"."\&$arg3")."\n";  
     } else {  
  Reply($client, "refused\n", $userinput);  
         
     }  
 # ------------------------------------------------------------------ queryreply  
  } elsif ($userinput =~ /^queryreply/) {  
     if(isClient) {  
  my ($cmd,$id,$reply)=split(/:/,$userinput);   
  my $store;  
  my $execdir=$perlvar{'lonDaemons'};  
  if ($store=IO::File->new(">$execdir/tmp/$id")) {  
     $reply=~s/\&/\n/g;  
     print $store $reply;  
     close $store;  
     my $store2=IO::File->new(">$execdir/tmp/$id.end");  
     print $store2 "done\n";  
     close $store2;  
     print $client "ok\n";  
  }  
  else {  
     print $client "error: ".($!+0)  
  ." IO::File->new Failed ".  
  "while attempting queryreply\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
        
     }  
 # ----------------------------------------------------------------- courseidput  
  } elsif ($userinput =~ /^courseidput/) {  
     if(isClient) {  
  my ($cmd,$udom,$what)=split(/:/,$userinput);  
  chomp($what);  
  $udom=~s/\W//g;  
  my $proname=  
     "$perlvar{'lonUsersDir'}/$udom/nohist_courseids";  
  my $now=time;  
  my @pairs=split(/\&/,$what);  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) {  
     foreach my $pair (@pairs) {  
  my ($key,$value)=split(/=/,$pair);  
  $hash{$key}=$value.':'.$now;  
     }  
     if (untie(%hash)) {  
  print $client "ok\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting courseidput\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting courseidput\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # ---------------------------------------------------------------- courseiddump  
  } elsif ($userinput =~ /^courseiddump/) {  
     if(isClient) {  
  my ($cmd,$udom,$since,$description)  
     =split(/:/,$userinput);  
  if (defined($description)) {  
     $description=&unescape($description);  
  } else {  
     $description='.';  
  }  
  unless (defined($since)) { $since=0; }  
  my $qresult='';  
  my $proname=  
     "$perlvar{'lonUsersDir'}/$udom/nohist_courseids";  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) {  
     while (my ($key,$value) = each(%hash)) {  
  my ($descr,$lasttime)=split(/\:/,$value);  
  if ($lasttime<$since) { next; }  
  if ($description eq '.') {  
     $qresult.=$key.'='.$descr.'&';  
  } else {  
     my $unescapeVal = &unescape($descr);  
     if (eval('$unescapeVal=~/\Q$description\E/i')) {  
  $qresult.="$key=$descr&";  
     }  
  }  
     }  
     if (untie(%hash)) {  
  chop($qresult);  
  print $client "$qresult\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting courseiddump\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting courseiddump\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # ----------------------------------------------------------------------- idput  
  } elsif ($userinput =~ /^idput/) {  
     if(isClient) {  
  my ($cmd,$udom,$what)=split(/:/,$userinput);  
  chomp($what);  
  $udom=~s/\W//g;  
  my $proname="$perlvar{'lonUsersDir'}/$udom/ids";  
  my $now=time;  
  {  
     my $hfh;  
     if (  
  $hfh=IO::File->new(">>$proname.hist")  
  ) { print $hfh "P:$now:$what\n"; }  
  }  
  my @pairs=split(/\&/,$what);  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) {  
     foreach my $pair (@pairs) {  
  my ($key,$value)=split(/=/,$pair);  
  $hash{$key}=$value;  
     }  
     if (untie(%hash)) {  
  print $client "ok\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting idput\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting idput\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # ----------------------------------------------------------------------- idget  
  } elsif ($userinput =~ /^idget/) {  
     if(isClient) {  
  my ($cmd,$udom,$what)=split(/:/,$userinput);  
  chomp($what);  
  $udom=~s/\W//g;  
  my $proname="$perlvar{'lonUsersDir'}/$udom/ids";  
  my @queries=split(/\&/,$what);  
  my $qresult='';  
  my %hash;  
  if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) {  
     for (my $i=0;$i<=$#queries;$i++) {  
  $qresult.="$hash{$queries[$i]}&";  
     }  
     if (untie(%hash)) {  
  $qresult=~s/\&$//;  
  print $client "$qresult\n";  
     } else {  
  print $client "error: ".($!+0)  
     ." untie(GDBM) Failed ".  
     "while attempting idget\n";  
     }  
  } else {  
     print $client "error: ".($!+0)  
  ." tie(GDBM) Failed ".  
  "while attempting idget\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # ---------------------------------------------------------------------- tmpput  
  } elsif ($userinput =~ /^tmpput/) {  
     if(isClient) {  
  my ($cmd,$what)=split(/:/,$userinput);  
  my $store;  
  $tmpsnum++;  
  my $id=$$.'_'.$clientip.'_'.$tmpsnum;  
  $id=~s/\W/\_/g;  
  $what=~s/\n//g;  
  my $execdir=$perlvar{'lonDaemons'};  
  if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) {  
     print $store $what;  
     close $store;  
     print $client "$id\n";  
  }  
  else {  
     print $client "error: ".($!+0)  
  ."IO::File->new Failed ".  
  "while attempting tmpput\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
       
     }  
       
 # ---------------------------------------------------------------------- tmpget  
  } elsif ($userinput =~ /^tmpget/) {  
     if(isClient) {  
  my ($cmd,$id)=split(/:/,$userinput);  
  chomp($id);  
  $id=~s/\W/\_/g;  
  my $store;  
  my $execdir=$perlvar{'lonDaemons'};  
  if ($store=IO::File->new("$execdir/tmp/$id.tmp")) {  
     my $reply=<$store>;  
     print $client "$reply\n";  
     close $store;  
  }  
  else {  
     print $client "error: ".($!+0)  
  ."IO::File->new Failed ".  
  "while attempting tmpget\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
         
     }  
 # ---------------------------------------------------------------------- tmpdel  
  } elsif ($userinput =~ /^tmpdel/) {  
     if(isClient) {  
  my ($cmd,$id)=split(/:/,$userinput);  
  chomp($id);  
  $id=~s/\W/\_/g;  
  my $execdir=$perlvar{'lonDaemons'};  
  if (unlink("$execdir/tmp/$id.tmp")) {  
     print $client "ok\n";  
  } else {  
     print $client "error: ".($!+0)  
  ."Unlink tmp Failed ".  
  "while attempting tmpdel\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
        
     }  
 # -------------------------------------------------------------------------- ls  
  } elsif ($userinput =~ /^ls/) {  
     if(isClient) {  
  my $obs;  
  my $rights;  
  my ($cmd,$ulsdir)=split(/:/,$userinput);  
  my $ulsout='';  
  my $ulsfn;  
  if (-e $ulsdir) {  
     if(-d $ulsdir) {  
  if (opendir(LSDIR,$ulsdir)) {  
     while ($ulsfn=readdir(LSDIR)) {  
  undef $obs, $rights;   
  my @ulsstats=stat($ulsdir.'/'.$ulsfn);  
  #We do some obsolete checking here  
  if(-e $ulsdir.'/'.$ulsfn.".meta") {   
     open(FILE, $ulsdir.'/'.$ulsfn.".meta");  
     my @obsolete=<FILE>;  
     foreach my $obsolete (@obsolete) {  
         if($obsolete =~ m|(<obsolete>)(on)|) { $obs = 1; }   
  if($obsolete =~ m|(<copyright>)(default)|) { $rights = 1; }  
     }  
  }  
  $ulsout.=$ulsfn.'&'.join('&',@ulsstats);  
  if($obs eq '1') { $ulsout.="&1"; }  
  else { $ulsout.="&0"; }  
  if($rights eq '1') { $ulsout.="&1:"; }  
  else { $ulsout.="&0:"; }  
     }  
     closedir(LSDIR);  
  }  
     } else {  
  my @ulsstats=stat($ulsdir);  
  $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';  
     }  
  } else {  
     $ulsout='no_such_dir';  
  }  
  if ($ulsout eq '') { $ulsout='empty'; }  
  print $client "$ulsout\n";  
     } else {  
  Reply($client, "refused\n", $userinput);  
        
     }  
 # ----------------------------------------------------------------- setannounce  
  } elsif ($userinput =~ /^setannounce/) {  
     if (isClient) {  
  my ($cmd,$announcement)=split(/:/,$userinput);  
  chomp($announcement);  
  $announcement=&unescape($announcement);  
  if (my $store=IO::File->new('>'.$perlvar{'lonDocRoot'}.  
     '/announcement.txt')) {  
     print $store $announcement;  
     close $store;  
     print $client "ok\n";  
  } else {  
     print $client "error: ".($!+0)."\n";  
  }  
     } else {  
  Reply($client, "refused\n", $userinput);  
          
     }  
 # ------------------------------------------------------------------ Hanging up  
  } elsif (($userinput =~ /^exit/) ||  
  ($userinput =~ /^init/)) { # no restrictions.  
     &logthis(  
      "Client $clientip ($clientname) hanging up: $userinput");  
     print $client "bye\n";  
     $client->shutdown(2);        # shutdown the socket forcibly.  
     $client->close();  
     last;  
   
 # ---------------------------------- set current host/domain  
  } elsif ($userinput =~ /^sethost:/) {  
     if (isClient) {  
  print $client &sethost($userinput)."\n";  
     } else {  
  print $client "refused\n";  
     }  
 #---------------------------------- request file (?) version.  
  } elsif ($userinput =~/^version:/) {  
     if (isClient) {  
  print $client &version($userinput)."\n";  
     } else {  
  print $client "refused\n";  
     }  
 #------------------------------- is auto-enrollment enabled?  
                 } elsif ($userinput =~/^autorun/) {  
                     if (isClient) {  
                         my $outcome = &localenroll::run();  
                         print $client "$outcome\n";  
                     } else {  
                         print $client "0\n";  
                     }  
 #------------------------------- get official sections (for auto-enrollment).  
                 } elsif ($userinput =~/^autogetsections/) {  
                     if (isClient) {  
                         my ($cmd,$coursecode)=split(/:/,$userinput);  
                         my @secs = &localenroll::get_sections($coursecode);  
                         my $seclist = &escape(join(':',@secs));  
                         print $client "$seclist\n";  
                     } else {  
                         print $client "refused\n";  
                     }  
 #----------------------- validate owner of new course section (for auto-enrollment).  
                 } elsif ($userinput =~/^autonewcourse/) {  
                     if (isClient) {  
                         my ($cmd,$course_id,$owner)=split(/:/,$userinput);  
                         my $outcome = &localenroll::new_course($course_id,$owner);  
                         print $client "$outcome\n";  
                     } else {  
                         print $client "refused\n";  
                     }  
 #-------------- validate course section in schedule of classes (for auto-enrollment).  
                 } elsif ($userinput =~/^autovalidatecourse/) {  
                     if (isClient) {  
                         my ($cmd,$course_id)=split(/:/,$userinput);  
                         my $outcome=&localenroll::validate_courseID($course_id);  
                         print $client "$outcome\n";  
                     } else {  
                         print $client "refused\n";  
                     }  
 #--------------------------- create password for new user (for auto-enrollment).  
                 } elsif ($userinput =~/^autocreatepassword/) {  
                     if (isClient) {  
                         my ($cmd,$authparam)=split(/:/,$userinput);  
                         my ($create_passwd,$authchk) = @_;  
                         ($authparam,$create_passwd,$authchk) = &localenroll::create_password($authparam);  
                         print $client &escape($authparam.':'.$create_passwd.':'.$authchk)."\n";  
                     } else {  
                         print $client "refused\n";  
                     }  
 #---------------------------  read and remove temporary files (for auto-enrollment).  
                 } elsif ($userinput =~/^autoretrieve/) {  
                     if (isClient) {  
                         my ($cmd,$filename) = split(/:/,$userinput);  
                         my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename;  
                         if ( (-e $source) && ($filename ne '') ) {  
                             my $reply = '';  
                             if (open(my $fh,$source)) {  
                                 while (<$fh>) {  
                                     chomp($_);  
                                     $_ =~ s/^\s+//g;  
                                     $_ =~ s/\s+$//g;  
                                     $reply .= $_;  
                                 }  
                                 close($fh);  
                                 print $client &escape($reply)."\n";  
 #                                unlink($source);  
                             } else {  
                                 print $client "error\n";  
                             }  
                         } else {  
                             print $client "error\n";  
                         }  
                     } else {  
                         print $client "refused\n";  
                     }  
 # ------------------------------------------------------------- unknown command  
   
  } else {  
     # unknown command  
     print $client "unknown_cmd\n";  
  }  
 # -------------------------------------------------------------------- complete  
  alarm(0);   alarm(0);
  &status('Listening to '.$clientname);   &status('Listening to '.$clientname." ($keymode)");   
     }      }
   
 # --------------------------------------------- client unknown or fishy, refuse  # --------------------------------------------- client unknown or fishy, refuse
  } else {   }  else {
     print $client "refused\n";      print $client "refused\n";
     $client->close();      $client->close();
     &logthis("<font color='blue'>WARNING: "      &logthis("<font color='blue'>WARNING: "
      ."Rejected client $clientip, closing connection</font>");       ."Rejected client $clientip, closing connection</font>");
  }   }
     }                   }            
           
 # =============================================================================  # =============================================================================
           
Line 3243  sub ManagePermissions Line 3825  sub ManagePermissions
  system("$execdir/lchtmldir $userhome $user $authtype");   system("$execdir/lchtmldir $userhome $user $authtype");
     }      }
 }  }
   
   
   #
   #  Return the full path of a user password file, whether it exists or not.
   # Parameters:
   #   domain     - Domain in which the password file lives.
   #   user       - name of the user.
   # Returns:
   #    Full passwd path:
   #
   sub password_path {
       my ($domain, $user) = @_;
   
   
       my $path   = &propath($domain, $user);
       $path  .= "/passwd";
   
       return $path;
   }
   
   #   Password Filename
   #   Returns the path to a passwd file given domain and user... only if
   #  it exists.
   # Parameters:
   #   domain    - Domain in which to search.
   #   user      - username.
   # Returns:
   #   - If the password file exists returns its path.
   #   - If the password file does not exist, returns undefined.
   #
   sub password_filename {
       my ($domain, $user) = @_;
   
       Debug ("PasswordFilename called: dom = $domain user = $user");
   
       my $path  = &password_path($domain, $user);
       Debug("PasswordFilename got path: $path");
       if(-e $path) {
    return $path;
       } else {
    return undef;
       }
   }
   
 #  #
 #   GetAuthType - Determines the authorization type of a user in a domain.  #   Rewrite the contents of the user's passwd file.
   #  Parameters:
   #    domain    - domain of the user.
   #    name      - User's name.
   #    contents  - New contents of the file.
   # Returns:
   #   0    - Failed.
   #   1    - Success.
   #
   sub rewrite_password_file {
       my ($domain, $user, $contents) = @_;
   
       my $file = &password_filename($domain, $user);
       if (defined $file) {
    my $pf = IO::File->new(">$file");
    if($pf) {
       print $pf "$contents\n";
       return 1;
    } else {
       return 0;
    }
       } else {
    return 0;
       }
   
   }
   
   #
   #   get_auth_type - Determines the authorization type of a user in a domain.
   
 #     Returns the authorization type or nouser if there is no such user.  #     Returns the authorization type or nouser if there is no such user.
 #  #
 sub GetAuthType   sub get_auth_type 
 {  {
   
     my ($domain, $user)  = @_;      my ($domain, $user)  = @_;
   
     Debug("GetAuthType( $domain, $user ) \n");      Debug("get_auth_type( $domain, $user ) \n");
     my $proname    = &propath($domain, $user);       my $proname    = &propath($domain, $user); 
     my $passwdfile = "$proname/passwd";      my $passwdfile = "$proname/passwd";
     if( -e $passwdfile ) {      if( -e $passwdfile ) {
Line 3269  sub GetAuthType Line 3923  sub GetAuthType
  }   }
   
  return "$authtype:$availinfo";   return "$authtype:$availinfo";
     }      } else {
     else {  
  Debug("Returning nouser");   Debug("Returning nouser");
  return "nouser";   return "nouser";
     }      }
 }  }
   
   #
   #  Validate a user given their domain, name and password.  This utility
   #  function is used by both  AuthenticateHandler and ChangePasswordHandler
   #  to validate the login credentials of a user.
   # Parameters:
   #    $domain    - The domain being logged into (this is required due to
   #                 the capability for multihomed systems.
   #    $user      - The name of the user being validated.
   #    $password  - The user's propoposed password.
   #
   # Returns:
   #     1        - The domain,user,pasword triplet corresponds to a valid
   #                user.
   #     0        - The domain,user,password triplet is not a valid user.
   #
   sub validate_user {
       my ($domain, $user, $password) = @_;
   
   
       # Why negative ~pi you may well ask?  Well this function is about
       # authentication, and therefore very important to get right.
       # I've initialized the flag that determines whether or not I've 
       # validated correctly to a value it's not supposed to get.
       # At the end of this function. I'll ensure that it's not still that
       # value so we don't just wind up returning some accidental value
       # as a result of executing an unforseen code path that
       # did not set $validated.
   
       my $validated = -3.14159;
   
       #  How we authenticate is determined by the type of authentication
       #  the user has been assigned.  If the authentication type is
       #  "nouser", the user does not exist so we will return 0.
   
       my $contents = &get_auth_type($domain, $user);
       my ($howpwd, $contentpwd) = split(/:/, $contents);
   
       my $null = pack("C",0); # Used by kerberos auth types.
   
       if ($howpwd ne 'nouser') {
   
    if($howpwd eq "internal") { # Encrypted is in local password file.
       $validated = (crypt($password, $contentpwd) eq $contentpwd);
    }
    elsif ($howpwd eq "unix") { # User is a normal unix user.
       $contentpwd = (getpwnam($user))[1];
       if($contentpwd) {
    if($contentpwd eq 'x') { # Shadow password file...
       my $pwauth_path = "/usr/local/sbin/pwauth";
       open PWAUTH,  "|$pwauth_path" or
    die "Cannot invoke authentication";
       print PWAUTH "$user\n$password\n";
       close PWAUTH;
       $validated = ! $?;
   
    } else {         # Passwords in /etc/passwd. 
       $validated = (crypt($password,
    $contentpwd) eq $contentpwd);
    }
       } else {
    $validated = 0;
       }
    }
    elsif ($howpwd eq "krb4") { # user is in kerberos 4 auth. domain.
       if(! ($password =~ /$null/) ) {
    my $k4error = &Authen::Krb4::get_pw_in_tkt($user,
      "",
      $contentpwd,,
      'krbtgt',
      $contentpwd,
      1,
      $password);
    if(!$k4error) {
       $validated = 1;
    } else {
       $validated = 0;
       &logthis('krb4: '.$user.', '.$contentpwd.', '.
        &Authen::Krb4::get_err_txt($Authen::Krb4::error));
    }
       } else {
    $validated = 0; # Password has a match with null.
       }
    } elsif ($howpwd eq "krb5") { # User is in kerberos 5 auth. domain.
       if(!($password =~ /$null/)) { # Null password not allowed.
    my $krbclient = &Authen::Krb5::parse_name($user.'@'
     .$contentpwd);
    my $krbservice = "krbtgt/".$contentpwd."\@".$contentpwd;
    my $krbserver  = &Authen::Krb5::parse_name($krbservice);
    my $credentials= &Authen::Krb5::cc_default();
    $credentials->initialize($krbclient);
    my $krbreturn  = &Authen::KRb5::get_in_tkt_with_password($krbclient,
    $krbserver,
    $password,
    $credentials);
    $validated = ($krbreturn == 1);
       } else {
    $validated = 0;
       }
    } elsif ($howpwd eq "localauth") { 
       #  Authenticate via installation specific authentcation method:
       $validated = &localauth::localauth($user, 
          $password, 
          $contentpwd);
    } else { # Unrecognized auth is also bad.
       $validated = 0;
    }
       } else {
    $validated = 0;
       }
       #
       #  $validated has the correct stat of the authentication:
       #
   
       unless ($validated != -3.14159) {
    die "ValidateUser - failed to set the value of validated";
       }
       return $validated;
   }
   
   
 sub addline {  sub addline {
     my ($fname,$hostid,$ip,$newline)=@_;      my ($fname,$hostid,$ip,$newline)=@_;
     my $contents;      my $contents;
Line 3521  sub make_passwd_file { Line 4294  sub make_passwd_file {
  return "no_priv_account_error\n";   return "no_priv_account_error\n";
     }      }
   
     my $execpath="$perlvar{'lonDaemons'}/"."lcuseradd";      my $execpath       ="$perlvar{'lonDaemons'}/"."lcuseradd";
   
       my $lc_error_file  = $execdir."/tmp/lcuseradd".$$.".status";
     {      {
  &Debug("Executing external: ".$execpath);   &Debug("Executing external: ".$execpath);
  &Debug("user  = ".$uname.", Password =". $npass);   &Debug("user  = ".$uname.", Password =". $npass);
Line 3529  sub make_passwd_file { Line 4304  sub make_passwd_file {
  print $se "$uname\n";   print $se "$uname\n";
  print $se "$npass\n";   print $se "$npass\n";
  print $se "$npass\n";   print $se "$npass\n";
    print $se "$lc_error_file\n"; # Status -> unique file.
     }      }
     my $useraddok = $?;      my $error = IO::File->new("< $lc_error_file");
       my $useraddok = <$error>;
       $error->close;
       unlink($lc_error_file);
   
       chomp $useraddok;
   
     if($useraddok > 0) {      if($useraddok > 0) {
  &logthis("Failed lcuseradd: ".&lcuseraddstrerror($useraddok));   my $error_text = &lcuseraddstrerror($useraddok);
    &logthis("Failed lcuseradd: $error_text");
    $result = "lcuseradd_failed:$error_text\n";
       }  else {
    my $pf = IO::File->new(">$passfilename");
    print $pf "unix:\n";
     }      }
     my $pf = IO::File->new(">$passfilename");  
     print $pf "unix:\n";  
  }   }
     } elsif ($umode eq 'none') {      } elsif ($umode eq 'none') {
  {   {
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new("> $passfilename");
     print $pf "none:\n";      print $pf "none:\n";
  }   }
     } else {      } else {
Line 3593  sub userload { Line 4378  sub userload {
     return $userloadpercent;      return $userloadpercent;
 }  }
   
   # Routines for serializing arrays and hashes (copies from lonnet)
   
   sub array2str {
     my (@array) = @_;
     my $result=&arrayref2str(\@array);
     $result=~s/^__ARRAY_REF__//;
     $result=~s/__END_ARRAY_REF__$//;
     return $result;
   }
                                                                                    
   sub arrayref2str {
     my ($arrayref) = @_;
     my $result='__ARRAY_REF__';
     foreach my $elem (@$arrayref) {
       if(ref($elem) eq 'ARRAY') {
         $result.=&arrayref2str($elem).'&';
       } elsif(ref($elem) eq 'HASH') {
         $result.=&hashref2str($elem).'&';
       } elsif(ref($elem)) {
         #print("Got a ref of ".(ref($elem))." skipping.");
       } else {
         $result.=&escape($elem).'&';
       }
     }
     $result=~s/\&$//;
     $result .= '__END_ARRAY_REF__';
     return $result;
   }
                                                                                    
   sub hash2str {
     my (%hash) = @_;
     my $result=&hashref2str(\%hash);
     $result=~s/^__HASH_REF__//;
     $result=~s/__END_HASH_REF__$//;
     return $result;
   }
                                                                                    
   sub hashref2str {
     my ($hashref)=@_;
     my $result='__HASH_REF__';
     foreach (sort(keys(%$hashref))) {
       if (ref($_) eq 'ARRAY') {
         $result.=&arrayref2str($_).'=';
       } elsif (ref($_) eq 'HASH') {
         $result.=&hashref2str($_).'=';
       } elsif (ref($_)) {
         $result.='=';
         #print("Got a ref of ".(ref($_))." skipping.");
       } else {
           if ($_) {$result.=&escape($_).'=';} else { last; }
       }
   
       if(ref($hashref->{$_}) eq 'ARRAY') {
         $result.=&arrayref2str($hashref->{$_}).'&';
       } elsif(ref($hashref->{$_}) eq 'HASH') {
         $result.=&hashref2str($hashref->{$_}).'&';
       } elsif(ref($hashref->{$_})) {
          $result.='&';
         #print("Got a ref of ".(ref($hashref->{$_}))." skipping.");
       } else {
         $result.=&escape($hashref->{$_}).'&';
       }
     }
     $result=~s/\&$//;
     $result .= '__END_HASH_REF__';
     return $result;
   }
   
 # ----------------------------------- POD (plain old documentation, CPAN style)  # ----------------------------------- POD (plain old documentation, CPAN style)
   

Removed from v.1.196  
changed lines
  Added in v.1.224


FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>