[BACK]Return to lond CVS log [TXT] [DIR] Up to [LON-CAPA] / loncom

Diff for /loncom/lond between versions 1.222 and 1.225

version 1.222, 2004/08/04 21:11:16 version 1.225, 2004/08/09 10:34:18
Line 52  use LONCAPA::lonlocal; Line 52  use LONCAPA::lonlocal;
 use LONCAPA::lonssl;  use LONCAPA::lonssl;
 use Fcntl qw(:flock);  use Fcntl qw(:flock);
   
 my $DEBUG = 1;       # Non zero to enable debug log entries.  my $DEBUG = 0;       # Non zero to enable debug log entries.
   
 my $status='';  my $status='';
 my $lastlog='';  my $lastlog='';
Line 122  my @passwderrors = ("ok", Line 122  my @passwderrors = ("ok",
    "lcpasswd Cannot set new passwd.",     "lcpasswd Cannot set new passwd.",
    "lcpasswd Username has invalid characters",     "lcpasswd Username has invalid characters",
    "lcpasswd Invalid characters in password",     "lcpasswd Invalid characters in password",
     "11", "12",     "lcpasswd User already exists", 
     "lcpasswd Password mismatch");                     "lcpasswd Something went wrong with user addition.",
       "lcpasswd Password mismatch",
       "lcpasswd Error filename is invalid");
   
   
 #  The array below are lcuseradd error strings.:  #  The array below are lcuseradd error strings.:
Line 192  sub LocalConnection { Line 194  sub LocalConnection {
  ."$clientdns ne $thisserver </font>");   ."$clientdns ne $thisserver </font>");
  close $Socket;   close $Socket;
  return undef;   return undef;
     }       }  else {
     else {  
  chomp($initcmd); # Get rid of \n in filename.   chomp($initcmd); # Get rid of \n in filename.
  my ($init, $type, $name) = split(/:/, $initcmd);   my ($init, $type, $name) = split(/:/, $initcmd);
  Debug(" Init command: $init $type $name ");   Debug(" Init command: $init $type $name ");
Line 324  sub InsecureConnection { Line 325  sub InsecureConnection {
     $answer    =~s/\W//g;      $answer    =~s/\W//g;
     if($challenge eq $answer) {      if($challenge eq $answer) {
  return 1;   return 1;
     }       } else {
     else {  
  logthis("<font color='blue'>WARNING client did not respond to challenge</font>");   logthis("<font color='blue'>WARNING client did not respond to challenge</font>");
  &status("No challenge reqply");   &status("No challenge reqply");
  return 0;   return 0;
Line 654  sub PushFile { Line 654  sub PushFile {
  &logthis('<font color="red"> Pushfile: unable to install '   &logthis('<font color="red"> Pushfile: unable to install '
  .$tablefile." $! </font>");   .$tablefile." $! </font>");
  return "error:$!";   return "error:$!";
     }      } else {
     else {  
  &logthis('<font color="green"> Installed new '.$tablefile   &logthis('<font color="green"> Installed new '.$tablefile
  ."</font>");   ."</font>");
   
Line 1501  sub change_password_handler { Line 1500  sub change_password_handler {
     &Failure( $client, "auth_mode_error\n", $userinput);      &Failure( $client, "auth_mode_error\n", $userinput);
  }     }  
   
     }      } else {
     else {  
  &Failure( $client, "non_authorized\n", $userinput);   &Failure( $client, "non_authorized\n", $userinput);
     }      }
   
Line 1511  sub change_password_handler { Line 1509  sub change_password_handler {
 register_handler("passwd", \&change_password_handler, 1, 1, 0);  register_handler("passwd", \&change_password_handler, 1, 1, 0);
   
   
   #
   #   Create a new user.  User in this case means a lon-capa user.
   #   The user must either already exist in some authentication realm
   #   like kerberos or the /etc/passwd.  If not, a user completely local to
   #   this loncapa system is created.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   sub add_user_handler {
   
       my ($cmd, $tail, $client) = @_;
   
   
       my ($udom,$uname,$umode,$npass)=split(/:/,$tail);
       my $userinput = $cmd.":".$tail; # Reconstruct the full request line.
   
       &Debug("cmd =".$cmd." $udom =".$udom." uname=".$uname);
   
   
       if($udom eq $currentdomainid) { # Reject new users for other domains...
   
    my $oldumask=umask(0077);
    chomp($npass);
    $npass=&unescape($npass);
    my $passfilename  = &password_path($udom, $uname);
    &Debug("Password file created will be:".$passfilename);
    if (-e $passfilename) {
       &Failure( $client, "already_exists\n", $userinput);
    } else {
       my @fpparts=split(/\//,$passfilename);
       my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2];
       my $fperror='';
       for (my $i=3;$i<= ($#fpparts-1);$i++) {
    $fpnow.='/'.$fpparts[$i]; 
    unless (-e $fpnow) {
       &logthis("mkdir $fpnow");
       unless (mkdir($fpnow,0777)) {
    $fperror="error: ".($!+0)." mkdir failed while attempting "
       ."makeuser";
       }
    }
       }
       unless ($fperror) {
    my $result=&make_passwd_file($uname, $umode,$npass, $passfilename);
    &Reply($client, $result, $userinput);     #BUGBUG - could be fail
       } else {
    &Failure($client, "$fperror\n", $userinput);
       }
    }
    umask($oldumask);
       }  else {
    &Failure($client, "not_right_domain\n",
    $userinput); # Even if we are multihomed.
       
       }
       return 1;
   
   }
   &register_handler("makeuser", \&add_user_handler, 1, 1, 0);
   
   #
   #   Change the authentication method of a user.  Note that this may
   #   also implicitly change the user's password if, for example, the user is
   #   joining an existing authentication realm.  Known authentication realms at
   #   this time are:
   #    internal   - Purely internal password file (only loncapa knows this user)
   #    local      - Institutionally written authentication module.
   #    unix       - Unix user (/etc/passwd with or without /etc/shadow).
   #    kerb4      - kerberos version 4
   #    kerb5      - kerberos version 5
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   #
   sub change_authentication_handler {
   
       my ($cmd, $tail, $client) = @_;
      
       my $userinput  = "$cmd:$tail";              # Reconstruct user input.
   
       my ($udom,$uname,$umode,$npass)=split(/:/,$tail);
       &Debug("cmd = ".$cmd." domain= ".$udom."uname =".$uname." umode= ".$umode);
       if ($udom ne $currentdomainid) {
    &Failure( $client, "not_right_domain\n", $client);
       } else {
   
    chomp($npass);
   
    $npass=&unescape($npass);
    my $passfilename = &password_path($udom, $uname);
    if ($passfilename) { # Not allowed to create a new user!!
       my $result=&make_passwd_file($uname, $umode,$npass,$passfilename);
       &Reply($client, $result, $userinput);
    } else {       
       &Failure($client, "non_authorized", $userinput); # Fail the user now.
    }
       }
       return 1;
   }
   &register_handler("changeuserauth", \&change_authentication_handler, 1,1, 0);
   
   #
   #   Determines if this is the home server for a user.  The home server
   #   for a user will have his/her lon-capa passwd file.  Therefore all we need
   #   to do is determine if this file exists.
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   #
   sub is_home_handler {
       my ($cmd, $tail, $client) = @_;
      
       my $userinput  = "$cmd:$tail";
      
       my ($udom,$uname)=split(/:/,$tail);
       chomp($uname);
       my $passfile = &password_filename($udom, $uname);
       if($passfile) {
    &Reply( $client, "found\n", $userinput);
       } else {
    &Failure($client, "not_found\n", $userinput);
       }
       return 1;
   }
   &register_handler("home", \&is_home_handler, 0,1,0);
   
   #
   #   Process an update request for a resource?? I think what's going on here is
   #   that a resource has been modified that we hold a subscription to.
   #   If the resource is not local, then we must update, or at least invalidate our
   #   cached copy of the resource. 
   #   FUTURE WORK:
   #      I need to look at this logic carefully.  My druthers would be to follow
   #      typical caching logic, and simple invalidate the cache, drop any subscription
   #      an let the next fetch start the ball rolling again... however that may
   #      actually be more difficult than it looks given the complex web of
   #      proxy servers.
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   # Implicit inputs:
   #    The authentication systems describe above have their own forms of implicit
   #    input into the authentication process that are described above.
   #
   sub update_resource_handler {
   
       my ($cmd, $tail, $client) = @_;
      
       my $userinput = "$cmd:$tail";
      
       my $fname= $tail; # This allows interactive testing
   
   
       my $ownership=ishome($fname);
       if ($ownership eq 'not_owner') {
    if (-e $fname) {
       my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size,
    $atime,$mtime,$ctime,$blksize,$blocks)=stat($fname);
       my $now=time;
       my $since=$now-$atime;
       if ($since>$perlvar{'lonExpire'}) {
    my $reply=&reply("unsub:$fname","$clientname");
    unlink("$fname");
       } else {
    my $transname="$fname.in.transfer";
    my $remoteurl=&reply("sub:$fname","$clientname");
    my $response;
    alarm(120);
    {
       my $ua=new LWP::UserAgent;
       my $request=new HTTP::Request('GET',"$remoteurl");
       $response=$ua->request($request,$transname);
    }
    alarm(0);
    if ($response->is_error()) {
       unlink($transname);
       my $message=$response->status_line;
       &logthis("LWP GET: $message for $fname ($remoteurl)");
    } else {
       if ($remoteurl!~/\.meta$/) {
    alarm(120);
    {
       my $ua=new LWP::UserAgent;
       my $mrequest=new HTTP::Request('GET',$remoteurl.'.meta');
       my $mresponse=$ua->request($mrequest,$fname.'.meta');
       if ($mresponse->is_error()) {
    unlink($fname.'.meta');
       }
    }
    alarm(0);
       }
       rename($transname,$fname);
    }
       }
       &Reply( $client, "ok\n", $userinput);
    } else {
       &Failure($client, "not_found\n", $userinput);
    }
       } else {
    &Failure($client, "rejected\n", $userinput);
       }
       return 1;
   }
   &register_handler("update", \&update_resource_handler, 0 ,1, 0);
   
   #
   #   Fetch a user file from a remote server:
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #
   sub fetch_user_file_handler {
   
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = "$cmd:$tail";
       my $fname           = $tail;
       my ($udom,$uname,$ufile)=split(/\//,$fname);
       my $udir=&propath($udom,$uname).'/userfiles';
       unless (-e $udir) {
    mkdir($udir,0770); 
       }
       if (-e $udir) {
    $ufile=~s/^[\.\~]+//;
    $ufile=~s/\///g;
    my $destname=$udir.'/'.$ufile;
    my $transname=$udir.'/'.$ufile.'.in.transit';
    my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;
    my $response;
    alarm(120);
    {
       my $ua=new LWP::UserAgent;
       my $request=new HTTP::Request('GET',"$remoteurl");
       $response=$ua->request($request,$transname);
    }
    alarm(0);
    if ($response->is_error()) {
       unlink($transname);
       my $message=$response->status_line;
       &logthis("LWP GET: $message for $fname ($remoteurl)");
       &Failure($client, "failed\n", $userinput);
    } else {
       if (!rename($transname,$destname)) {
    &logthis("Unable to move $transname to $destname");
    unlink($transname);
    &Failure($client, "failed\n", $userinput);
       } else {
    &Reply($client, "ok\n", $userinput);
       }
    }   
       } else {
    &Failure($client, "not_home\n", $userinput);
       }
       return 1;
   }
   &register_handler("fetchuserfile", \&fetch_user_file_handler, 0, 1, 0);
   
 #---------------------------------------------------------------  #---------------------------------------------------------------
 #  #
 #   Getting, decoding and dispatching requests:  #   Getting, decoding and dispatching requests:
Line 1525  register_handler("passwd", \&change_pass Line 1812  register_handler("passwd", \&change_pass
 sub get_request {  sub get_request {
     my $input = <$client>;      my $input = <$client>;
     chomp($input);      chomp($input);
   j
     Debug("get_request: Request = $input\n");      Debug("get_request: Request = $input\n");
   
     &status('Processing '.$clientname.':'.$input);      &status('Processing '.$clientname.':'.$input);
Line 1625  sub process_request { Line 1912  sub process_request {
 #------------------- Commands not yet in spearate handlers. --------------  #------------------- Commands not yet in spearate handlers. --------------
   
   
   
 # -------------------------------------------------------------------- makeuser  
     if ($userinput =~ /^makeuser/) { # encoded and client.  
  &Debug("Make user received");  
  my $oldumask=umask(0077);  
  if (($wasenc==1) && isClient) {  
     my   
  ($cmd,$udom,$uname,$umode,$npass)=split(/:/,$userinput);  
     &Debug("cmd =".$cmd." $udom =".$udom.  
    " uname=".$uname);  
     chomp($npass);  
     $npass=&unescape($npass);  
     my $proname=propath($udom,$uname);  
     my $passfilename="$proname/passwd";  
     &Debug("Password file created will be:".  
    $passfilename);  
     if (-e $passfilename) {  
  print $client "already_exists\n";  
     } elsif ($udom ne $currentdomainid) {  
  print $client "not_right_domain\n";  
     } else {  
  my @fpparts=split(/\//,$proname);  
  my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2];  
  my $fperror='';  
  for (my $i=3;$i<=$#fpparts;$i++) {  
     $fpnow.='/'.$fpparts[$i];   
     unless (-e $fpnow) {  
  unless (mkdir($fpnow,0777)) {  
     $fperror="error: ".($!+0)  
  ." mkdir failed while attempting "  
  ."makeuser";  
  }  
     }  
  }  
  unless ($fperror) {  
     my $result=&make_passwd_file($uname, $umode,$npass,  
  $passfilename);  
     print $client $result;  
  } else {  
     print $client "$fperror\n";  
  }  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
  umask($oldumask);  
 # -------------------------------------------------------------- changeuserauth  
     } elsif ($userinput =~ /^changeuserauth/) { # encoded & client  
  &Debug("Changing authorization");  
  if (($wasenc==1) && isClient) {  
     my   
  ($cmd,$udom,$uname,$umode,$npass)=split(/:/,$userinput);  
     chomp($npass);  
     &Debug("cmd = ".$cmd." domain= ".$udom.  
    "uname =".$uname." umode= ".$umode);  
     $npass=&unescape($npass);  
     my $proname=&propath($udom,$uname);  
     my $passfilename="$proname/passwd";  
     if ($udom ne $currentdomainid) {  
  print $client "not_right_domain\n";  
     } else {  
  my $result=&make_passwd_file($uname, $umode,$npass,  
      $passfilename);  
  print $client $result;  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ------------------------------------------------------------------------ home  
     } elsif ($userinput =~ /^home/) { # client clear or encoded  
  if(isClient) {  
     my ($cmd,$udom,$uname)=split(/:/,$userinput);  
     chomp($uname);  
     my $proname=propath($udom,$uname);  
     if (-e $proname) {  
  print $client "found\n";  
     } else {  
  print $client "not_found\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # ---------------------------------------------------------------------- update  
     } elsif ($userinput =~ /^update/) { # client clear or encoded.  
  if(isClient) {  
     my ($cmd,$fname)=split(/:/,$userinput);  
     my $ownership=ishome($fname);  
     if ($ownership eq 'not_owner') {  
  if (-e $fname) {  
     my ($dev,$ino,$mode,$nlink,  
  $uid,$gid,$rdev,$size,  
  $atime,$mtime,$ctime,  
  $blksize,$blocks)=stat($fname);  
     my $now=time;  
     my $since=$now-$atime;  
     if ($since>$perlvar{'lonExpire'}) {  
  my $reply=  
     &reply("unsub:$fname","$clientname");  
     unlink("$fname");  
     } else {  
  my $transname="$fname.in.transfer";  
  my $remoteurl=  
     &reply("sub:$fname","$clientname");  
  my $response;  
  {  
     my $ua=new LWP::UserAgent;  
     my $request=new HTTP::Request('GET',"$remoteurl");  
     $response=$ua->request($request,$transname);  
  }  
  if ($response->is_error()) {  
     unlink($transname);  
     my $message=$response->status_line;  
     &logthis(  
      "LWP GET: $message for $fname ($remoteurl)");  
  } else {  
     if ($remoteurl!~/\.meta$/) {  
  my $ua=new LWP::UserAgent;  
  my $mrequest=  
     new HTTP::Request('GET',$remoteurl.'.meta');  
  my $mresponse=  
     $ua->request($mrequest,$fname.'.meta');  
  if ($mresponse->is_error()) {  
     unlink($fname.'.meta');  
  }  
     }  
     rename($transname,$fname);  
  }  
     }  
     print $client "ok\n";  
  } else {  
     print $client "not_found\n";  
  }  
     } else {  
  print $client "rejected\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
       
  }  
 # -------------------------------------- fetch a user file from a remote server  
     } elsif ($userinput =~ /^fetchuserfile/) { # Client clear or enc.  
  if(isClient) {  
     my ($cmd,$fname)=split(/:/,$userinput);  
     my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|);  
     my $udir=propath($udom,$uname).'/userfiles';  
     unless (-e $udir) { mkdir($udir,0770); }  
     if (-e $udir) {  
  $ufile=~s/^[\.\~]+//;  
  my $path = $udir;  
  if ($ufile =~m|(.+)/([^/]+)$|) {  
     my @parts=split('/',$1);  
     foreach my $part (@parts) {  
  $path .= '/'.$part;  
  if ((-e $path)!=1) {  
     mkdir($path,0770);  
  }  
     }  
  }  
  my $destname=$udir.'/'.$ufile;  
  my $transname=$udir.'/'.$ufile.'.in.transit';  
  my $remoteurl='http://'.$clientip.'/userfiles/'.$fname;  
  my $response;  
  {  
     my $ua=new LWP::UserAgent;  
     my $request=new HTTP::Request('GET',"$remoteurl");  
     $response=$ua->request($request,$transname);  
  }  
  if ($response->is_error()) {  
     unlink($transname);  
     my $message=$response->status_line;  
     &logthis("LWP GET: $message for $fname ($remoteurl)");  
     print $client "failed\n";  
  } else {  
     if (!rename($transname,$destname)) {  
  &logthis("Unable to move $transname to $destname");  
  unlink($transname);  
  print $client "failed\n";  
     } else {  
  print $client "ok\n";  
     }  
  }  
     } else {  
  print $client "not_home\n";  
     }  
  } else {  
     Reply($client, "refused\n", $userinput);  
  }  
 # --------------------------------------------------------- remove a user file   # --------------------------------------------------------- remove a user file 
     } elsif ($userinput =~ /^removeuserfile/) { # Client clear or enc.     if ($userinput =~ /^removeuserfile/) { # Client clear or enc.
  if(isClient) {   if(isClient) {
     my ($cmd,$fname)=split(/:/,$userinput);      my ($cmd,$fname)=split(/:/,$userinput);
     my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|);      my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|);
Line 2493  sub process_request { Line 2590  sub process_request {
  print $store2 "done\n";   print $store2 "done\n";
  close $store2;   close $store2;
  print $client "ok\n";   print $client "ok\n";
     }      } else {
     else {  
  print $client "error: ".($!+0)   print $client "error: ".($!+0)
     ." IO::File->new Failed ".      ." IO::File->new Failed ".
     "while attempting queryreply\n";      "while attempting queryreply\n";
Line 3692  sub make_new_child { Line 3788  sub make_new_child {
  $inittype = ""; # This forces insecure attempt.   $inittype = ""; # This forces insecure attempt.
  &logthis("<font color=\"blue\"> Certificates not "   &logthis("<font color=\"blue\"> Certificates not "
  ."installed -- trying insecure auth</font>");   ."installed -- trying insecure auth</font>");
     }      } else { # SSL certificates are in place so
     else { # SSL certificates are in place so  
     } # Leave the inittype alone.      } # Leave the inittype alone.
  }   }
   
Line 3927  sub get_auth_type Line 4022  sub get_auth_type
  }   }
   
  return "$authtype:$availinfo";   return "$authtype:$availinfo";
     }      } else {
     else {  
  Debug("Returning nouser");   Debug("Returning nouser");
  return "nouser";   return "nouser";
     }      }
Line 4008  sub validate_user { Line 4102  sub validate_user {
    $password);     $password);
  if(!$k4error) {   if(!$k4error) {
     $validated = 1;      $validated = 1;
  }   } else {
  else {  
     $validated = 0;      $validated = 0;
     &logthis('krb4: '.$user.', '.$contentpwd.', '.      &logthis('krb4: '.$user.', '.$contentpwd.', '.
      &Authen::Krb4::get_err_txt($Authen::Krb4::error));       &Authen::Krb4::get_err_txt($Authen::Krb4::error));
  }   }
     }      } else {
     else {  
  $validated = 0; # Password has a match with null.   $validated = 0; # Password has a match with null.
     }      }
  }   } elsif ($howpwd eq "krb5") { # User is in kerberos 5 auth. domain.
  elsif ($howpwd eq "krb5") { # User is in kerberos 5 auth. domain.  
     if(!($password =~ /$null/)) { # Null password not allowed.      if(!($password =~ /$null/)) { # Null password not allowed.
  my $krbclient = &Authen::Krb5::parse_name($user.'@'   my $krbclient = &Authen::Krb5::parse_name($user.'@'
   .$contentpwd);    .$contentpwd);
Line 4032  sub validate_user { Line 4123  sub validate_user {
  $password,   $password,
  $credentials);   $credentials);
  $validated = ($krbreturn == 1);   $validated = ($krbreturn == 1);
     }      } else {
     else {  
  $validated = 0;   $validated = 0;
     }      }
  }   } elsif ($howpwd eq "localauth") { 
  elsif ($howpwd eq "localauth") {   
     #  Authenticate via installation specific authentcation method:      #  Authenticate via installation specific authentcation method:
     $validated = &localauth::localauth($user,       $validated = &localauth::localauth($user, 
        $password,          $password, 
        $contentpwd);         $contentpwd);
  }   } else { # Unrecognized auth is also bad.
  else { # Unrecognized auth is also bad.  
     $validated = 0;      $validated = 0;
  }   }
     } else {      } else {
Line 4305  sub make_passwd_file { Line 4393  sub make_passwd_file {
  return "no_priv_account_error\n";   return "no_priv_account_error\n";
     }      }
   
     my $execpath="$perlvar{'lonDaemons'}/"."lcuseradd";      my $execpath       ="$perlvar{'lonDaemons'}/"."lcuseradd";
   
       my $lc_error_file  = $execdir."/tmp/lcuseradd".$$.".status";
     {      {
  &Debug("Executing external: ".$execpath);   &Debug("Executing external: ".$execpath);
  &Debug("user  = ".$uname.", Password =". $npass);   &Debug("user  = ".$uname.", Password =". $npass);
Line 4313  sub make_passwd_file { Line 4403  sub make_passwd_file {
  print $se "$uname\n";   print $se "$uname\n";
  print $se "$npass\n";   print $se "$npass\n";
  print $se "$npass\n";   print $se "$npass\n";
    print $se "$lc_error_file\n"; # Status -> unique file.
     }      }
     my $useraddok = $?;      my $error = IO::File->new("< $lc_error_file");
       my $useraddok = <$error>;
       $error->close;
       unlink($lc_error_file);
   
       chomp $useraddok;
   
     if($useraddok > 0) {      if($useraddok > 0) {
  &logthis("Failed lcuseradd: ".&lcuseraddstrerror($useraddok));   my $error_text = &lcuseraddstrerror($useraddok);
    &logthis("Failed lcuseradd: $error_text");
    $result = "lcuseradd_failed:$error_text\n";
       }  else {
    my $pf = IO::File->new(">$passfilename");
    print $pf "unix:\n";
     }      }
     my $pf = IO::File->new(">$passfilename");  
     print $pf "unix:\n";  
  }   }
     } elsif ($umode eq 'none') {      } elsif ($umode eq 'none') {
  {   {
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new("> $passfilename");
     print $pf "none:\n";      print $pf "none:\n";
  }   }
     } else {      } else {
Removed from v.1.222  
changed lines
  Added in v.1.225

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>